chaskiq 0.0.1 → 0.0.2

data/spec/dummy/config/database.yml

@@ -0,0 +1,52 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+
+
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+development:
+  adapter: mysql2
+  database: chasky_dev
+  username: root
+  password:
+  host: 127.0.0.1
+  pool: 22
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  adapter: mysql2
+  database: chasky_test
+  username: root
+  password:
+  host: 127.0.0.1
+  pool: 5
+
+#
+#default: &default
+#  adapter: sqlite3
+#  pool: 5
+#  timeout: 5000
+
+#development:
+#  <<: *default
+#  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+#test:
+#  <<: *default
+#  database: db/test.sqlite3
+
+#production:
+#  <<: *default
+#  database: db/production.sqlite3

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,54 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  config.allow_concurrency = true
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+  config.action_mailer.perform_deliveries = true
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+  Rails.application.routes.default_url_options = {host: 'http://localhost:3000'}
+  config.action_controller.default_url_options = {host: 'http://localhost:3000'}
+  config.action_mailer.default_url_options = {host: 'http://localhost:3000'}
+  config.action_mailer.smtp_settings = {
+    :address => ENV['EMAIL_ADDRESS'],
+    :user_name => ENV['EMAIL_USER_NAME'], # Your SMTP user here.
+    :password => ENV['EMAIL_PASSWORD'], # Your SMTP password here.
+    :authentication => :login,
+    :enable_starttls_auto => true
+  }
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,45 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+  Rails.application.routes.default_url_options = {host: 'http://localhost:3000'}
+  config.action_controller.default_url_options = {host: 'http://localhost:3000'}
+  config.action_mailer.default_url_options = {host: 'http://localhost:3000'}
+end

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/dummy/config/rainbows.rb

@@ -0,0 +1,14 @@
+worker_processes 3
+timeout 30
+preload_app true
+
+Rainbows! do
+  use :EventMachine
+end
+
+before_fork do |server, worker|
+  # Replace with MongoDB or whatever
+  if defined?(ActiveRecord::Base)
+    ActiveRecord::Base.connection.disconnect!
+  end
+end

data/spec/dummy/config/routes.rb

@@ -0,0 +1,6 @@
+Rails.application.routes.draw do
+
+  mount Chaskiq::Engine => "/"
+  require 'sidekiq/web'
+  mount Sidekiq::Web => '/sidekiq'
+end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: 04a8adbe50e879b4a055f16b81f10e3a29eeca9c6ba20e1e64abfd64392ec0ad714c6cfafe672a31738a2c2aca8d7cbc1bfbf36c155b32489beba3e0aec0309e
+
+test:
+  secret_key_base: 301166d4fc01bbe749466d1e7576f909e189594db2a806ecdc09a84583617911b05e2eefc89bc1b6f361e97ce9d908366d0c19053a3bb974d61096324eeb756e
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application

data/spec/dummy/db/schema.rb

@@ -0,0 +1,112 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 20150321205815) do
+
+  create_table "chaskiq_attachments", force: :cascade do |t|
+    t.string   "image",        limit: 255
+    t.string   "content_type", limit: 255
+    t.integer  "size",         limit: 4
+    t.string   "name",         limit: 255
+    t.integer  "campaign_id",  limit: 4
+    t.datetime "created_at",               null: false
+    t.datetime "updated_at",               null: false
+  end
+
+  add_index "chaskiq_attachments", ["campaign_id"], name: "index_chaskiq_attachments_on_campaign_id", using: :btree
+
+  create_table "chaskiq_campaigns", force: :cascade do |t|
+    t.string   "subject",          limit: 255
+    t.string   "from_name",        limit: 255
+    t.string   "from_email",       limit: 255
+    t.string   "reply_email",      limit: 255
+    t.text     "plain_content",    limit: 65535
+    t.text     "html_content",     limit: 65535
+    t.text     "premailer",        limit: 65535
+    t.text     "description",      limit: 65535
+    t.string   "logo",             limit: 255
+    t.string   "name",             limit: 255
+    t.string   "query_string",     limit: 255
+    t.datetime "scheduled_at"
+    t.string   "timezone",         limit: 255
+    t.string   "state",            limit: 255
+    t.integer  "recipients_count", limit: 4
+    t.boolean  "sent",             limit: 1
+    t.integer  "opens_count",      limit: 4
+    t.integer  "clicks_count",     limit: 4
+    t.integer  "parent_id",        limit: 4
+    t.datetime "created_at",                     null: false
+    t.datetime "updated_at",                     null: false
+    t.integer  "list_id",          limit: 4
+    t.integer  "template_id",      limit: 4
+  end
+
+  add_index "chaskiq_campaigns", ["list_id"], name: "index_chaskiq_campaigns_on_list_id", using: :btree
+  add_index "chaskiq_campaigns", ["parent_id"], name: "index_chaskiq_campaigns_on_parent_id", using: :btree
+  add_index "chaskiq_campaigns", ["template_id"], name: "index_chaskiq_campaigns_on_template_id", using: :btree
+
+  create_table "chaskiq_lists", force: :cascade do |t|
+    t.string   "name",              limit: 255
+    t.string   "state",             limit: 255
+    t.integer  "unsubscribe_count", limit: 4
+    t.integer  "bounced",           limit: 4
+    t.integer  "active_count",      limit: 4
+    t.datetime "created_at",                    null: false
+    t.datetime "updated_at",                    null: false
+  end
+
+  create_table "chaskiq_metrics", force: :cascade do |t|
+    t.integer  "trackable_id",   limit: 4,   null: false
+    t.string   "trackable_type", limit: 255, null: false
+    t.integer  "campaign_id",    limit: 4
+    t.string   "action",         limit: 255
+    t.string   "host",           limit: 255
+    t.string   "data",           limit: 255
+    t.datetime "created_at",                 null: false
+    t.datetime "updated_at",                 null: false
+  end
+
+  add_index "chaskiq_metrics", ["campaign_id"], name: "index_chaskiq_metrics_on_campaign_id", using: :btree
+  add_index "chaskiq_metrics", ["trackable_type", "trackable_id"], name: "index_chaskiq_metrics_on_trackable_type_and_trackable_id", using: :btree
+
+  create_table "chaskiq_settings", force: :cascade do |t|
+    t.text     "config",      limit: 65535
+    t.integer  "campaign_id", limit: 4
+    t.datetime "created_at",                null: false
+    t.datetime "updated_at",                null: false
+  end
+
+  add_index "chaskiq_settings", ["campaign_id"], name: "index_chaskiq_settings_on_campaign_id", using: :btree
+
+  create_table "chaskiq_subscribers", force: :cascade do |t|
+    t.string   "name",       limit: 255
+    t.string   "email",      limit: 255
+    t.string   "state",      limit: 255
+    t.string   "last_name",  limit: 255
+    t.integer  "list_id",    limit: 4
+    t.datetime "created_at",             null: false
+    t.datetime "updated_at",             null: false
+  end
+
+  add_index "chaskiq_subscribers", ["list_id"], name: "index_chaskiq_subscribers_on_list_id", using: :btree
+
+  create_table "chaskiq_templates", force: :cascade do |t|
+    t.string   "name",         limit: 255
+    t.text     "body",         limit: 65535
+    t.text     "html_content", limit: 65535
+    t.string   "screenshot",   limit: 255
+    t.datetime "created_at",                 null: false
+    t.datetime "updated_at",                 null: false
+  end
+
+end