RubyGems - challah - Versions diffs - 1.0.0.beta → 1.0.0.beta2 - Mend

challah 1.0.0.beta → 1.0.0.beta2

Files changed (4442) hide show

data/vendor/bundle/gems/tzinfo-0.3.35/lib/tzinfo/tzdataparser.rb DELETED Viewed

@@ -1,1168 +0,0 @@
-#--
-# Copyright (c) 2005-2010 Philip Ross
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-require 'date'
-require 'fileutils'
-module TZInfo
-  # Parses tzdata from ftp://elsie.nci.nih.gov/pub/ and transforms it into
-  # a set of Ruby modules that can be used through Timezone and Country.
-  #
-  # Normally, this class wouldn't be used. It is only run to update the
-  # timezone data and index modules.
-  class TZDataParser
-    # Minimum year that will be considered.
-    MIN_YEAR = 1800
-    # Maximum year that will be considered.
-    MAX_YEAR = 2050
-    # Whether to generate zone definitions (set to false to stop zones being
-    # generated).
-    attr_accessor :generate_zones
-    # Whether to generate country definitions (set to false to stop countries
-    # being generated).
-    attr_accessor :generate_countries
-    # Limit the set of zones to generate (set to an array containing zone
-    # identifiers).
-    attr_accessor :only_zones
-    # Zones to exclude from generation when not using only_zones (set to an
-    # array containing zone identifiers).
-    attr_accessor :exclude_zones
-    # Initializes a new TZDataParser. input_dir must contain the extracted
-    # tzdata tarball. output_dir is the location to output the modules
-    # (in definitions and indexes directories).
-    def initialize(input_dir, output_dir)
-      super()
-      @input_dir = input_dir
-      @output_dir = output_dir
-      @rule_sets = {}
-      @zones = {}
-      @countries = {}
-      @no_rules = TZDataNoRules.new
-      @generate_zones = true
-      @generate_countries = true
-      @only_zones = []
-      @exclude_zones = []
-    end
-    # Reads the tzdata source and generates the classes. Takes a long time
-    # to run. Currently outputs debugging information to standard out.
-    def execute
-      Dir.foreach(@input_dir) {|file|
-        load_rules(file) if file =~ /^[^\.]+$/
-      }
-      Dir.foreach(@input_dir) {|file|
-        load_zones(file) if file =~ /^[^\.]+$/
-      }
-      Dir.foreach(@input_dir) {|file|
-        load_links(file) if file =~ /^[^\.]+$/
-      }
-      load_countries
-      if @generate_zones
-        modules = []
-        if @only_zones.nil? || @only_zones.empty?
-          @zones.each_value {|zone|
-            zone.write_module(@output_dir) unless @exclude_zones.include?(zone.name)
-          }
-        else
-          @only_zones.each {|id|
-            zone = @zones[id]
-            zone.write_module(@output_dir)
-          }
-        end
-        write_timezones_index
-      end
-      if @generate_countries
-        write_countries_index
-      end
-    end
-    # Parses a month specified in the tz data and converts it to a number
-    # between 1 and 12 representing January to December.
-    def self.parse_month(month)
-      lower = month.downcase
-      if lower =~ /^jan/
-        @month = 1
-      elsif lower =~ /^feb/
-        @month = 2
-      elsif lower =~ /^mar/
-        @month = 3
-      elsif lower =~ /^apr/
-        @month = 4
-      elsif lower =~ /^may/
-        @month = 5
-      elsif lower =~ /^jun/
-        @month = 6
-      elsif lower =~ /^jul/
-        @month = 7
-      elsif lower =~ /^aug/
-        @month = 8
-      elsif lower =~ /^sep/
-        @month = 9
-      elsif lower =~ /^oct/
-        @month = 10
-      elsif lower =~ /^nov/
-        @month = 11
-      elsif lower =~ /^dec/
-        @month = 12
-      else
-        raise "Invalid month: #{month}"
-      end
-    end
-    # Parses an offset string [-]h:m:s (minutes and seconds are optional). Returns
-    # the offset in seconds.
-    def self.parse_offset(offset)
-      raise "Invalid time: #{offset}" if offset !~ /^(-)?(?:([0-9]+)(?::([0-9]+)(?::([0-9]+))?)?)?$/
-      negative = !$1.nil?
-      hour = $2.nil? ? 0 : $2.to_i
-      minute = $3.nil? ? 0 : $3.to_i
-      second = $4.nil? ? 0 : $4.to_i
-      seconds = hour
-      seconds = seconds * 60
-      seconds = seconds + minute
-      seconds = seconds * 60
-      seconds = seconds + second
-      seconds = -seconds if negative
-      seconds
-    end
-    # Encloses the string in single quotes and escapes any single quotes in
-    # the content.
-    def self.quote_str(str)
-      "'#{str.gsub('\'', '\\\\\'')}'"
-    end
-    private
-      # Loads all the Rule definitions from the tz data and stores them in
-      # @rule_sets.
-      def load_rules(file)
-        puts 'load_rules: ' + file
-        IO.foreach(@input_dir + File::SEPARATOR + file) {|line|
-          line = line.gsub(/#.*$/, '')
-          line = line.gsub(/\s+$/, '')
-          if line =~ /^Rule\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)/
-            name = $1
-            if @rule_sets[name].nil?
-              @rule_sets[name] = TZDataRuleSet.new(name)
-            end
-            @rule_sets[name].add_rule(TZDataRule.new($2, $3, $4, $5, $6, $7, $8, $9))
-          end
-        }
-      end
-      # Gets a rules object for the given reference. Might be a named rule set,
-      # a fixed offset or an empty ruleset.
-      def get_rules(ref)
-        if ref == '-'
-          @no_rules
-        elsif ref =~ /^[0-9]+:[0-9]+$/
-          TZDataFixedOffsetRules.new(TZDataParser.parse_offset(ref))
-        else
-          rule_set = @rule_sets[ref]
-          raise "Ruleset not found: #{ref}" if rule_set.nil?
-          rule_set
-        end
-      end
-      # Loads in the Zone definitions from the tz data and stores them in @zones.
-      def load_zones(file)
-        puts 'load_zones: ' + file
-        in_zone = nil
-        IO.foreach(@input_dir + File::SEPARATOR + file) {|line|
-          line = line.gsub(/#.*$/, '')
-          line = line.gsub(/\s+$/, '')
-          if in_zone
-            if line =~ /^\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)(\s+([0-9]+(\s+.*)?))?$/
-              in_zone.add_observance(TZDataObservance.new($1, get_rules($2), $3, $5))
-              in_zone = nil if $4.nil?
-            end
-          else
-            if line =~ /^Zone\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)\s+([^\s]+)(\s+([0-9]+(\s+.*)?))?$/
-              name = $1
-              if @zones[name].nil?
-                @zones[name] = TZDataZone.new(name)
-              end
-              @zones[name].add_observance(TZDataObservance.new($2, get_rules($3), $4, $6))
-              in_zone = @zones[name] if !$5.nil?
-            end
-          end
-        }
-      end
-      # Loads in the links and stores them in @zones.
-      def load_links(file)
-        puts 'load_links: ' + file
-        IO.foreach(@input_dir + File::SEPARATOR + file) {|line|
-          line = line.gsub(/#.*$/, '')
-          line = line.gsub(/\s+$/, '')
-          if line =~ /^Link\s+([^\s]+)\s+([^\s]+)/
-            name = $2
-            link_to = @zones[$1]
-            raise "Link to zone not found (#{name}->#{link_to})" if link_to.nil?
-            raise "Zone already defined: #{name}" if !@zones[name].nil?
-            @zones[name] = TZDataLink.new(name, link_to)
-          end
-        }
-      end
-      # Loads countries from iso3166.tab and zone.tab and stores the result in
-      # @countries.
-      def load_countries
-        puts 'load_countries'
-        IO.foreach(@input_dir + File::SEPARATOR + 'iso3166.tab') {|line|
-          if line =~ /^([A-Z]{2})\t(.*)$/
-            code = $1
-            name = $2
-            @countries[code] = TZDataCountry.new(code, name)
-          end
-        }
-        IO.foreach(@input_dir + File::SEPARATOR + 'zone.tab') {|line|
-          line.chomp!
-          if line =~ /^([A-Z]{2})\t([^\t]+)\t([^\t]+)(\t(.*))?$/
-            code = $1
-            location_str = $2
-            zone_name = $3
-            description = $5
-            country = @countries[code]
-            raise "Country not found: #{code}" if country.nil?
-            location = TZDataLocation.new(location_str)
-            zone = @zones[zone_name]
-            raise "Zone not found: #{zone_name}" if zone.nil?
-            description = nil if description == ''
-            country.add_zone(TZDataCountryTimezone.new(zone, description, location))
-          end
-        }
-      end
-      # Writes a country index file.
-      def write_countries_index
-        dir = @output_dir + File::SEPARATOR + 'indexes'
-        FileUtils.mkdir_p(dir)
-        File.open(dir + File::SEPARATOR + 'countries.rb', 'w') {|file|
-          file.binmode
-          file.puts('module TZInfo')
-          file.puts('  module Indexes')
-          file.puts('    module Countries')
-          file.puts('      include CountryIndexDefinition')
-          file.puts('')
-          countries = @countries.values.sort {|c1,c2| c1.code <=> c2.code}
-          countries.each {|country| country.write_index_record(file)}
-          file.puts('    end') # end module Countries
-          file.puts('  end') # end module Indexes
-          file.puts('end') # end module TZInfo
-        }
-      end
-      # Writes a timezone index file.
-      def write_timezones_index
-        dir = File.join(@output_dir, 'indexes')
-        FileUtils.mkdir_p(dir)
-        File.open(File.join(dir, 'timezones.rb'), 'w') do |file|
-          file.binmode
-          file.puts('module TZInfo')
-          file.puts('  module Indexes')
-          file.puts('    module Timezones')
-          file.puts('      include TimezoneIndexDefinition')
-          file.puts('')
-          zones = @zones.values.sort {|t1,t2| t1.name <=> t2.name}
-          zones.each {|zone| zone.write_index_record(file)}
-          file.puts('    end') # end module Timezones
-          file.puts('  end') # end module Indexes
-          file.puts('end') # end module TZInfo
-        end
-      end
-  end
-  # Base class for all rule sets.
-  class TZDataRules #:nodoc:
-    # Name of the rule set, e.g. EU.
-    attr_reader :name
-    def initialize(name)
-      @name = name
-    end
-    def count
-      0
-    end
-  end
-  # Empty rule set with a fixed daylight savings (std) offset.
-  class TZDataFixedOffsetRules < TZDataRules #:nodoc:
-    attr_reader :offset
-    def initialize(offset)
-      super(offset.to_s)
-      @offset = offset
-    end
-  end
-  # An empty set of rules.
-  class TZDataNoRules < TZDataRules #:nodoc:
-    def initialize
-      super('-')
-    end
-  end
-  # A rule set (as defined by Rule name in the tz data).
-  class TZDataRuleSet < TZDataRules #:nodoc:
-    attr_reader :rules
-    def initialize(name)
-      super
-      @rules = []
-    end
-    # Adds a new rule to the set.
-    def add_rule(rule)
-      @rules << rule
-    end
-    def count
-      @rules.length
-    end
-    def each
-      @rules.each {|rule| yield rule}
-    end
-  end
-  # A rule in a RuleSet (a single Rule line in the tz data).
-  class TZDataRule #:nodoc:
-    attr_reader :from
-    attr_reader :to
-    attr_reader :type
-    attr_reader :in_month
-    attr_reader :on_day
-    attr_reader :at_time
-    attr_reader :save
-    attr_reader :letter
-    def initialize(from, to, type, in_month, on_day, at_time, save, letter)
-      @from = parse_from(from)
-      @to = parse_to(to)
-      # replace a to of :only with the from year
-      raise 'to cannot be only if from is minimum' if @to == :only && @from == :min
-      @to = @from if @to == :only
-      @type = parse_type(type)
-      @in_month = TZDataParser.parse_month(in_month)
-      @on_day = TZDataDayOfMonth.new(on_day)
-      @at_time = TZDataTime.new(at_time)
-      @save = TZDataParser.parse_offset(save)
-      @letter = parse_letter(letter)
-    end
-    def activate(year)
-      # The following test ignores yearistype at present (currently unused in
-      # the data. parse_type currently excepts on encountering a year type.
-      if (@from == :min || @from <= year) && (@to == :max || @to >= year)
-        TZDataActivatedRule.new(self, year)
-      else
-        nil
-      end
-    end
-    def at_utc_time(year, utc_offset, std_offset)
-      @at_time.to_utc(utc_offset, std_offset,
-        year, @in_month, @on_day.to_absolute(year, @in_month))
-    end
-    private
-      def parse_from(from)
-        lower = from.downcase
-        if lower =~ /^min/
-          :min
-        elsif lower =~ /^[0-9]+$/
-          lower.to_i
-        else
-          raise "Invalid from: #{from}"
-        end
-      end
-      def parse_to(to)
-        lower = to.downcase
-        if lower =~ /^max/
-          :max
-        elsif lower =~ /^o/
-          :only
-        elsif lower =~ /^[0-9]+$/
-          lower.to_i
-        else
-          raise "Invalid to: #{to}"
-        end
-      end
-      def parse_type(type)
-        raise "Unsupported rule type: #{type}" if type != '-'
-        nil
-      end
-      def parse_letter(letter)
-        if letter == '-'
-          nil
-        else
-          letter
-        end
-      end
-  end
-  # Base class for Zones and Links.
-  class TZDataDefinition #:nodoc:
-    attr_reader :name
-    attr_reader :name_elements
-    attr_reader :path_elements
-    def initialize(name)
-      @name = name
-      # + and - aren't allowed in class names
-      @name_elements = name.gsub(/-/, '__m__').gsub(/\+/, '__p__').split(/\//)
-      @path_elements = @name_elements.clone
-      @path_elements.pop
-    end
-    # Creates necessary directories, the file, writes the class header and footer
-    # and yields to a block to write the content.
-    def create_file(output_dir)
-      dir = output_dir + File::SEPARATOR + 'definitions' + File::SEPARATOR + @path_elements.join(File::SEPARATOR)
-      FileUtils.mkdir_p(dir)
-      File.open(output_dir + File::SEPARATOR + 'definitions' + File::SEPARATOR + @name_elements.join(File::SEPARATOR) + '.rb', 'w') {|file|
-        file.binmode
-        def file.indent(by)
-          if @tz_indent
-            @tz_indent += by
-          else
-            @tz_indent = by
-          end
-        end
-        def file.puts(s)
-          super("#{' ' * (@tz_indent || 0)}#{s}")
-        end
-        file.puts('module TZInfo')
-        file.indent(2)
-        file.puts('module Definitions')
-        file.indent(2)
-        @name_elements.each do |part|
-          file.puts("module #{part}")
-          file.indent(2)
-        end
-        file.puts('include TimezoneDefinition')
-        file.puts('')
-        yield file
-        @name_elements.each do
-          file.indent(-2)
-          file.puts('end')
-        end
-        file.indent(-2)
-        file.puts('end') # end module Definitions
-        file.indent(-2)
-        file.puts('end') # end module TZInfo
-      }
-    end
-  end
-  # A tz data Link.
-  class TZDataLink < TZDataDefinition #:nodoc:
-    attr_reader :link_to
-    def initialize(name, link_to)
-      super(name)
-      @link_to = link_to
-    end
-    # Writes a module for this link.
-    def write_module(output_dir)
-      puts "writing link #{name}"
-      create_file(output_dir) {|file|
-        file.puts("linked_timezone #{TZDataParser.quote_str(@name)}, #{TZDataParser.quote_str(@link_to.name)}")
-      }
-    end
-    # Writes an index record for this link.
-    def write_index_record(file)
-      file.puts("      linked_timezone #{TZDataParser.quote_str(@name)}")
-    end
-  end
-  # A tz data Zone. Each line from the tz data is loaded as a TZDataObservance.
-  class TZDataZone < TZDataDefinition #:nodoc:
-    attr_reader :observances
-    def initialize(name)
-      super
-      @observances = []
-    end
-    def add_observance(observance)
-      @observances << observance
-    end
-    # Writes the module for the zone. Iterates all the periods and asks them
-    # to write all periods in the timezone.
-    def write_module(output_dir)
-      puts "writing zone #{name}"
-      create_file(output_dir) {|file|
-        file.puts("timezone #{TZDataParser.quote_str(@name)} do |tz|")
-        file.indent(2)
-        transitions = find_transitions
-        transitions.output_module(file)
-        file.indent(-2)
-        file.puts('end')
-      }
-    end
-    # Writes an index record for this zone.
-    def write_index_record(file)
-      file.puts("      timezone #{TZDataParser.quote_str(@name)}")
-    end
-    private
-      def find_transitions
-        transitions = TZDataTransitions.new
-        # algorithm from zic.c outzone
-        start_time = nil
-        until_time = nil
-        @observances.each_with_index {|observance, i|
-          std_offset = 0
-          use_start = i > 0
-          use_until = i < @observances.length - 1
-          utc_offset = observance.utc_offset
-          start_zone_id = nil
-          start_utc_offset = observance.utc_offset
-          start_std_offset = 0
-          if observance.rule_set.count == 0
-            std_offset = observance.std_offset
-            start_zone_id = observance.format.expand(std_offset, nil)
-            if use_start
-              transitions << TZDataTransition.new(start_time, utc_offset, std_offset, start_zone_id)
-              use_start = false
-            else
-              # zic algorithm only outputs this if std_offset is non-zero
-              # to get the initial LMT range, we output this regardless
-              transitions << TZDataTransition.new(nil, utc_offset, std_offset, start_zone_id)
-            end
-          else
-            (TZDataParser::MIN_YEAR..TZDataParser::MAX_YEAR).each {|year|
-              if use_until && year > observance.valid_until.year
-                break
-              end
-              activated_rules = []
-              observance.rule_set.each {|rule|
-                activated_rule = rule.activate(year)
-                activated_rules << activated_rule unless activated_rule.nil?
-              }
-              while true
-                # turn until_time into UTC using the current utc_offset and std_offset
-                until_time = observance.valid_until.to_utc(utc_offset, std_offset) if use_until
-                earliest = nil
-                activated_rules.each {|activated_rule|
-                  # recalculate the time using the current std_offset
-                  activated_rule.calculate_time(utc_offset, std_offset)
-                  earliest = activated_rule if earliest.nil? || activated_rule.at < earliest.at
-                }
-                break if earliest.nil?
-                activated_rules.delete(earliest)
-                break if use_until && earliest.at >= until_time
-                std_offset = earliest.rule.save
-                use_start = false if use_start && earliest.at == start_time
-                if use_start
-                  if earliest.at < start_time
-                    start_utc_offset = observance.utc_offset
-                    start_std_offset = std_offset
-                    start_zone_id = observance.format.expand(earliest.rule.save, earliest.rule.letter)
-                    next
-                  end
-                  if start_zone_id.nil? && start_utc_offset + start_std_offset == observance.utc_offset + std_offset
-                    start_zone_id = observance.format.expand(earliest.rule.save, earliest.rule.letter)
-                  end
-                end
-                zone_id = observance.format.expand(earliest.rule.save, earliest.rule.letter)
-                transitions << TZDataTransition.new(earliest.at, observance.utc_offset, earliest.rule.save, zone_id)
-              end
-            }
-          end
-          if use_start
-            start_zone_id = observance.format.expand(nil, nil) if start_zone_id.nil? && observance.format.fixed?
-            raise 'Could not determine time zone abbreviation to use just after until time' if start_zone_id.nil?
-            transitions << TZDataTransition.new(start_time, start_utc_offset, start_std_offset, start_zone_id)
-          end
-          start_time = observance.valid_until.to_utc(utc_offset, std_offset) if use_until
-        }
-        transitions
-      end
-  end
-  # A observance within a zone (a line within the zone definition).
-  class TZDataObservance #:nodoc:
-    attr_reader :utc_offset
-    attr_reader :rule_set
-    attr_reader :format
-    attr_reader :valid_until
-    def initialize(utc_offset, rule_set, format, valid_until)
-      @utc_offset = TZDataParser.parse_offset(utc_offset)
-      @rule_set = rule_set
-      @format = TZDataFormat.new(format)
-      @valid_until = valid_until.nil? ? nil : TZDataUntil.new(valid_until)
-    end
-    def std_offset
-      if @rule_set.kind_of?(TZDataFixedOffsetRules)
-        @rule_set.offset
-      else
-        0
-      end
-    end
-  end
-  # Collection of TZDataTransition instances used when building a zone class.
-  class TZDataTransitions #:nodoc:
-    def initialize
-      @transitions = []
-    end
-    def << (transition)
-      @transitions << transition
-    end
-    def output_module(file)
-      optimize
-      # Try and end on a transition to std if one happens in the last year.
-      if @transitions.length > 1 &&
-          @transitions.last.std_offset != 0 &&
-          @transitions[@transitions.length - 2].std_offset == 0 &&
-          @transitions[@transitions.length - 2].at_utc.year == TZDataParser::MAX_YEAR
-        transitions = @transitions[0..@transitions.length - 2]
-      else
-        transitions = @transitions
-      end
-      process_offsets(file)
-      file.puts('')
-      transitions.each do |t|
-        t.write(file)
-      end
-    end
-    private
-      def optimize
-        @transitions.sort!
-        # Optimization logic from zic.c writezone.
-        from_i = 0
-        to_i = 0
-        while from_i < @transitions.length
-          if to_i > 1 &&
-              !@transitions[from_i].at_utc.nil?  &&
-              !@transitions[to_i - 1].at_utc.nil? &&
-              @transitions[from_i].at_utc + Rational(@transitions[to_i - 1].total_offset, 86400) <=
-              @transitions[to_i - 1].at_utc + Rational(@transitions[to_i - 2].total_offset, 86400)
-            @transitions[to_i - 1] = @transitions[from_i].clone_with_at(@transitions[to_i - 1].at_utc)
-            from_i += 1
-            next
-          end
-          # Shuffle transitions up, eliminating any redundant transitions
-          # along the way.
-          if to_i == 0 ||
-              @transitions[to_i - 1].utc_offset != @transitions[from_i].utc_offset ||
-              @transitions[to_i - 1].std_offset != @transitions[from_i].std_offset ||
-              @transitions[to_i - 1].zone_id != @transitions[from_i].zone_id
-            @transitions[to_i] = @transitions[from_i]
-            to_i += 1
-          end
-          from_i += 1
-        end
-        if to_i > 0
-          @transitions = @transitions[0..to_i - 1]
-        else
-          @transitions = []
-        end
-      end
-      def quote_zone_id(zone_id)
-        if zone_id =~ %r{[\-+']}
-          ":#{TZDataParser.quote_str(zone_id)}"
-        else
-          ":#{zone_id}"
-        end
-      end
-      def process_offsets(file)
-        # A bit of a hack at the moment. The offset used to be output with
-        # each period (pair of transitions). They are now separated from the
-        # transition data. The code should probably be changed at some point to
-        # setup the offsets at an earlier stage.
-        # Assume that when this is called, the first transition is the Local
-        # Mean Time initial rule or a transition with no time that defines the
-        # offset for the entire zone.
-        offsets = []
-        # Find the first std offset. Timezones always start in std.
-        @transitions.each do |t|
-          if t.std_offset == 0
-            offset = {:utc_offset => t.utc_offset,
-              :std_offset => t.std_offset,
-              :zone_id => t.zone_id,
-              :name => 'o0'}
-            offsets << offset
-            break
-          end
-        end
-        @transitions.each do |t|
-          offset = offsets.find do |o|
-            o[:utc_offset] == t.utc_offset &&
-              o[:std_offset] == t.std_offset &&
-              o[:zone_id] == t.zone_id
-          end
-          unless offset
-            offset = {:utc_offset => t.utc_offset,
-              :std_offset => t.std_offset,
-              :zone_id => t.zone_id,
-              :name => "o#{offsets.length}"}
-            offsets << offset
-          end
-          t.offset_name = offset[:name]
-        end
-        offsets.each do |offset|
-          file.puts("tz.offset :#{offset[:name]}, #{offset[:utc_offset]}, #{offset[:std_offset]}, #{quote_zone_id(offset[:zone_id])}")
-        end
-      end
-  end
-  # A transition that will be used to write the periods in a zone class.
-  class TZDataTransition #:nodoc:
-    include Comparable
-    attr_reader :at_utc
-    attr_reader :utc_offset
-    attr_reader :std_offset
-    attr_reader :zone_id
-    attr_accessor :offset_name
-    def initialize(at_utc, utc_offset, std_offset, zone_id)
-      @at_utc = at_utc
-      @utc_offset = utc_offset
-      @std_offset = std_offset
-      @zone_id = zone_id
-      @offset_name = nil
-    end
-    def to_s
-      "At #{at_utc} UTC switch to UTC offset #{@utc_offset} with std offset #{@std_offset}, zone id #{@zone_id}"
-    end
-    def <=>(transition)
-      if @at_utc == transition.at_utc
-        0
-      elsif @at_utc.nil?
-        -1
-      elsif transition.nil?
-        1
-      else
-        @at_utc - transition.at_utc
-      end
-    end
-    def total_offset
-      @utc_offset + @std_offset
-    end
-    def clone_with_at(at_utc)
-      TZDataTransition.new(at_utc, @utc_offset, @std_offset, @zone_id)
-    end
-    def write(file)
-      if @at_utc
-        file.puts "tz.transition #{@at_utc.year}, #{@at_utc.mon}, :#{@offset_name}, #{datetime_constructor(@at_utc)}"
-      end
-    end
-    private
-      def datetime_constructor(datetime)
-        if (1970..2037).include?(datetime.year)
-          "#{Time.utc(datetime.year, datetime.mon, datetime.mday, datetime.hour, datetime.min, datetime.sec).to_i}"
-        else
-          "#{datetime.ajd.numerator}, #{datetime.ajd.denominator}"
-        end
-      end
-  end
-  # An instance of a rule for a year.
-  class TZDataActivatedRule #:nodoc:
-    attr_reader :rule
-    attr_reader :year
-    attr_reader :at
-    def initialize(rule, year)
-      @rule = rule
-      @year = year
-      @at = nil
-    end
-    def calculate_time(utc_offset, std_offset)
-      @at = @rule.at_utc_time(@year, utc_offset, std_offset)
-    end
-  end
-  # A tz data time definition - an hour, minute, second and reference. Reference
-  # is either :utc, :standard or :wall_clock.
-  class TZDataTime #:nodoc:
-    attr_reader :hour
-    attr_reader :minute
-    attr_reader :second
-    attr_reader :ref
-    def initialize(spec)
-      raise "Invalid time: #{spec}" if spec !~ /^([0-9]+)(:([0-9]+)(:([0-9]+))?)?([wguzs])?$/
-      @hour = $1.to_i
-      @minute = $3.nil? ? 0 : $3.to_i
-      @second = $5.nil? ? 0 : $5.to_i
-      if $6 == 's'
-        @ref = :standard
-      elsif $6 == 'g' || $6 == 'u' || $6 == 'z'
-        @ref = :utc
-      else
-        @ref = :wall_clock
-      end
-    end
-    # Converts the time to UTC given a utc_offset and std_offset.
-    def to_utc(utc_offset, std_offset, year, month, day)
-      result = DateTime.new(year, month, day, @hour, @minute, @second)
-      offset = 0
-      offset = offset + utc_offset if @ref == :standard || @ref == :wall_clock
-      offset = offset + std_offset if @ref == :wall_clock
-      result - Rational(offset, 86400)
-    end
-  end
-  # A tz data day of the month reference. Can either be an absolute day,
-  # a last week day or a week day >= or <= than a specific day of month.
-  class TZDataDayOfMonth #:nodoc:
-    attr_reader :type
-    attr_reader :day_of_month
-    attr_reader :day_of_week
-    attr_reader :operator
-    def initialize(spec)
-      raise "Invalid on: #{spec}" if spec !~ /^([0-9]+)|(last([A-z]+))|(([A-z]+)([<>]=)([0-9]+))$/
-      if $1
-        @type = :absolute
-        @day_of_month = $1.to_i
-      elsif $3
-        @type = :last
-        @day_of_week = parse_day_of_week($3)
-      else
-        @type = :comparison
-        @day_of_week = parse_day_of_week($5)
-        @operator = parse_operator($6)
-        @day_of_month = $7.to_i
-      end
-    end
-    # Returns the absolute day of month for the given year and month.
-    def to_absolute(year, month)
-      case @type
-        when :last
-          last_day_in_month = (Date.new(year, month, 1) >> 1) - 1
-          offset = last_day_in_month.wday - @day_of_week
-          offset = offset + 7 if offset < 0
-          (last_day_in_month - offset).day
-        when :comparison
-          pivot = Date.new(year, month, @day_of_month)
-          offset = @day_of_week - pivot.wday
-          offset = -offset if @operator == :less_equal
-          offset = offset + 7 if offset < 0
-          offset = -offset if @operator == :less_equal
-          result = pivot + offset
-          if result.month != pivot.month
-            puts self.inspect
-            puts year
-            puts month
-          end
-          raise 'No suitable date found' if result.month != pivot.month
-          result.day
-        else #absolute
-          @day_of_month
-      end
-    end
-    private
-      def parse_day_of_week(day_of_week)
-        lower = day_of_week.downcase
-        if lower =~ /^mon/
-          1
-        elsif lower =~ /^tue/
-          2
-        elsif lower =~ /^wed/
-          3
-        elsif lower =~ /^thu/
-          4
-        elsif lower =~ /^fri/
-          5
-        elsif lower =~ /^sat/
-          6
-        elsif lower =~ /^sun/
-          0
-        else
-          raise "Invalid day of week: #{day_of_week}"
-        end
-      end
-      def parse_operator(operator)
-        if operator == '>='
-          :greater_equal
-        elsif operator == '<='
-          :less_equal
-        else
-          raise "Invalid operator: #{operator}"
-        end
-      end
-  end
-  # A tz data Zone until reference.
-  class TZDataUntil #:nodoc:
-    attr_reader :year
-    attr_reader :month
-    attr_reader :day
-    attr_reader :time
-    def initialize(spec)
-      parts = spec.split(/\s+/)
-      raise "Invalid until: #{spec}" if parts.length < 1
-      @year = parts[0].to_i
-      @month = parts.length > 1 ? TZDataParser.parse_month(parts[1]) : 1
-      @day = TZDataDayOfMonth.new(parts.length > 2 ? parts[2] : '1')
-      @time = TZDataTime.new(parts.length > 3 ? parts[3] : '00:00')
-    end
-    # Converts the reference to a UTC DateTime.
-    def to_utc(utc_offset, std_offset)
-      @time.to_utc(utc_offset, std_offset, @year, @month, @day.to_absolute(@year, @month))
-    end
-  end
-  # A tz data Zone format string. Either alternate standard/daylight-savings,
-  # substitution (%s) format or a fixed string.
-  class TZDataFormat #:nodoc:
-    def initialize(spec)
-      if spec =~ /([A-z]+)\/([A-z]+)/
-        @type = :alternate
-        @standard_abbrev = $1
-        @daylight_abbrev = $2
-      elsif spec =~ /%s/
-        @type = :subst
-        @abbrev = spec
-      else
-        @type = :fixed
-        @abbrev = spec
-      end
-    end
-    # Expands given the current daylight savings offset and Rule string.
-    def expand(std_offset, rule_string)
-      if @type == :alternate
-        if std_offset == 0
-          @standard_abbrev
-        else
-          @daylight_abbrev
-        end
-      elsif @type == :subst
-        sprintf(@abbrev, rule_string)
-      else
-        @abbrev
-      end
-    end
-    # True if a string from the rule is required to expand this format.
-    def requires_rule_string?
-      @type == :subst
-    end
-    # Is a fixed format string.
-    def fixed?
-      @type == :fixed
-    end
-  end
-  # A location (latitude + longitude)
-  class TZDataLocation #:nodoc:
-    attr_reader :latitude
-    attr_reader :longitude
-    # Constructs a new TZDataLocation from a string in ISO 6709
-    # sign-degrees-minutes-seconds format, either +-DDMM+-DDDMM
-    # or +-DDMMSS+-DDDMMSS, first latitude (+ is north),
-    # then longitude (+ is east).
-    def initialize(coordinates)
-      if coordinates !~ /^([+\-])([0-9]{2})([0-9]{2})([0-9]{2})?([+\-])([0-9]{3})([0-9]{2})([0-9]{2})?$/
-        raise "Invalid coordinates: #{coordinates}"
-      end
-      @latitude = Rational($2.to_i) + Rational($3.to_i, 60)
-      @latitude += Rational($4.to_i, 3600) unless $4.nil?
-      @latitude = -@latitude if $1 == '-'
-      @longitude = Rational($6.to_i) + Rational($7.to_i, 60)
-      @longitude += Rational($8.to_i, 3600) unless $8.nil?
-      @longitude = -@longitude if $5 == '-'
-    end
-  end
-  TZDataCountryTimezone = Struct.new(:timezone, :description, :location)
-  # An ISO 3166 country.
-  class TZDataCountry #:nodoc:
-    attr_reader :code
-    attr_reader :name
-    attr_reader :zones
-    def initialize(code, name)
-      @code = code
-      @name = name
-      @zones = []
-    end
-    # Adds a TZDataCountryTimezone
-    def add_zone(zone)
-      @zones << zone
-    end
-    def write_index_record(file)
-      s = "      country #{TZDataParser.quote_str(@code)}, #{TZDataParser.quote_str(@name)}"
-      s << ' do |c|' if @zones.length > 0
-      file.puts s
-      @zones.each do |zone|
-        file.puts "        c.timezone #{TZDataParser.quote_str(zone.timezone.name)}, #{zone.location.latitude.numerator}, #{zone.location.latitude.denominator}, #{zone.location.longitude.numerator}, #{zone.location.longitude.denominator}#{zone.description.nil? ? '' : ', ' + TZDataParser.quote_str(zone.description)}"
-      end
-      file.puts '      end' if @zones.length > 0
-    end
-  end
-end