carrier 0.0.6

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,24 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # In the development environment your application's code is reloaded on
+  # every request.  This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Log error messages when you accidentally call methods on nil.
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger
+  config.active_support.deprecation = :log
+
+  # Only use best-standards-support built into browsers
+  config.action_dispatch.best_standards_support = :builtin
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,52 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # Code is not reloaded between requests
+  config.cache_classes = true
+
+  # Full error reports are disabled and caching is turned on
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this)
+  config.serve_static_assets = false
+
+  # Compress both stylesheets and JavaScripts
+  config.assets.js_compressor  = :uglifier
+  config.assets.css_compressor = :scss
+
+  # Specifies the header that your server uses for sending files
+  # (comment out if your front-end server doesn't support this)
+  config.action_dispatch.x_sendfile_header = "X-Sendfile" # Use 'X-Accel-Redirect' for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # See everything in the log (default is :info)
+  # config.log_level = :debug
+
+  # Use a different logger for distributed setups
+  # config.logger = SyslogLogger.new
+
+  # Use a different cache store in production
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets (application.js, application.css, and all non-JS/CSS are already added)
+  # config.assets.precompile += %w( search.js )
+
+  # Disable delivery errors, bad email addresses will be ignored
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable threaded mode
+  # config.threadsafe!
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found)
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners
+  config.active_support.deprecation = :notify
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,39 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The test environment is used exclusively to run your application's
+  # test suite.  You never need to work with it otherwise.  Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs.  Don't rely on the data there!
+  config.cache_classes = true
+
+  # Configure static asset server for tests with Cache-Control for performance
+  config.serve_static_assets = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Log error messages when you accidentally call methods on nil
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment
+  config.action_controller.allow_forgery_protection    = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Use SQL instead of Active Record's schema dumper when creating the test database.
+  # This is necessary if your schema can't be completely dumped by the schema dumper,
+  # like if you have constraints or database-specific column types
+  # config.active_record.schema_format = :sql
+
+  # Print deprecation notices to the stderr
+  config.active_support.deprecation = :stderr
+end

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/carrier.rb

@@ -0,0 +1,3 @@
+Carrier.configure do |config|
+  config.models.tables = {:message => "messages", :chain => "chains"}
+end

data/spec/dummy/config/initializers/devise.rb

@@ -0,0 +1,204 @@
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in DeviseMailer.
+  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+  
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  config.stretches = 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "59da23dfc1dfdff7555830f65e9d3cbd398104e789aac99fc10cbc9d3f5f7db81394a216e3f1e28881e2a5ab810dc551324d9393ccf568bd593824b8d3f5554e"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give your user to confirm his account. During this time
+  # he will be able to access your application without confirming. Default is 0.days
+  # When confirm_within is zero, the user won't be able to sign in without confirming.
+  # You can use this to let your user access some features of your application
+  # without confirming the account, but blocking it after a certain period
+  # (ie 2 days).
+  # config.confirm_within = 2.days
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, a valid remember token can be re-used between multiple browsers.
+  # config.remember_across_browsers = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # If true, uses the password salt as remember token. This should be turned
+  # to false if you are not using database authenticatable.
+  config.use_salt_as_remember_token = true
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.cookie_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 6..128.
+  # config.password_length = 6..128
+
+  # Regex to use to validate the email address
+  # config.email_regexp = /\A([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})\z/i
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 2.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha512
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # If true, authentication through token does not store user in session and needs
+  # to be supplied on each request. Useful if you are using the token as API token.
+  # config.stateless_token = false
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Configure sign_out behavior.
+  # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
+  # The default is true, which means any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The :"*/*" and "*/*" formats below is required to match Internet
+  # Explorer requests.
+  # config.navigational_formats = [:"*/*", "*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.failure_app   = AnotherApp
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+end

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,10 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format
+# (all these examples are active by default):
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/spec/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+Dummy::Application.config.secret_token = '44f71a79ce50902cfb0ca02c47871686c3b7ad6e25762d2595aca7c1716aaffa8c03c9fb58c0eb357b8fcb233f6d47ae246a5faae12d6e690ff1c916247b0ea7'

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'
+
+# Use the database for sessions instead of the cookie-based default,
+# which shouldn't be used to store highly confidential information
+# (create the session table with "rails generate session_migration")
+# Dummy::Application.config.session_store :active_record_store

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,12 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file contains the settings for ActionController::ParametersWrapper
+# which will be enabled by default in the upcoming version of Ruby on Rails.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActionController::Base.wrap_parameters format: [:json]
+
+# Disable root element in JSON by default.
+if defined?(ActiveRecord)
+  ActiveRecord::Base.include_root_in_json = false
+end

data/spec/dummy/config/locales/devise.en.yml

@@ -0,0 +1,53 @@
+# Additional translations at http://github.com/plataformatec/devise/wiki/I18n
+
+en:
+  errors:
+    messages:
+      expired: "has expired, please request a new one"
+      not_found: "not found"
+      already_confirmed: "was already confirmed, please try signing in"
+      not_locked: "was not locked"
+      not_saved:
+        one: "1 error prohibited this %{resource} from being saved:"
+        other: "%{count} errors prohibited this %{resource} from being saved:"
+
+  devise:
+    failure:
+      already_authenticated: 'You are already signed in.'
+      unauthenticated: 'You need to sign in or sign up before continuing.'
+      unconfirmed: 'You have to confirm your account before continuing.'
+      locked: 'Your account is locked.'
+      invalid: 'Invalid email or password.'
+      invalid_token: 'Invalid authentication token.'
+      timeout: 'Your session expired, please sign in again to continue.'
+      inactive: 'Your account was not activated yet.'
+    sessions:
+      signed_in: 'Signed in successfully.'
+      signed_out: 'Signed out successfully.'
+    passwords:
+      send_instructions: 'You will receive an email with instructions about how to reset your password in a few minutes.'
+      updated: 'Your password was changed successfully. You are now signed in.'
+      send_paranoid_instructions: "If your e-mail exists on our database, you will receive a password recovery link on your e-mail"
+    confirmations:
+      send_instructions: 'You will receive an email with instructions about how to confirm your account in a few minutes.'
+      send_paranoid_instructions: 'If your e-mail exists on our database, you will receive an email with instructions about how to confirm your account in a few minutes.'
+      confirmed: 'Your account was successfully confirmed. You are now signed in.'
+    registrations:
+      signed_up: 'Welcome! You have signed up successfully.'
+      inactive_signed_up: 'You have signed up successfully. However, we could not sign you in because your account is %{reason}.'
+      updated: 'You updated your account successfully.'
+      destroyed: 'Bye! Your account was successfully cancelled. We hope to see you again soon.'
+    unlocks:
+      send_instructions: 'You will receive an email with instructions about how to unlock your account in a few minutes.'
+      unlocked: 'Your account was successfully unlocked. You are now signed in.'
+      send_paranoid_instructions: 'If your account exists, you will receive an email with instructions about how to unlock it in a few minutes.'
+    omniauth_callbacks:
+      success: 'Successfully authorized from %{kind} account.'
+      failure: 'Could not authorize you from %{kind} because "%{reason}".'
+    mailer:
+      confirmation_instructions:
+        subject: 'Confirmation instructions'
+      reset_password_instructions:
+        subject: 'Reset password instructions'
+      unlock_instructions:
+        subject: 'Unlock Instructions'

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,5 @@
+# Sample localization file for English. Add more files in this directory for other locales.
+# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+en:
+  hello: "Hello world"