care_bert 0.0.2

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: 0192361d8faffa37ecf535c9b2aca53fda05b221
+  data.tar.gz: 4e95efa522cb0fec19b593551b8d6b6bc6b56fef
+SHA512:
+  metadata.gz: 037a877e86dbcd706d52717ef3d64b95264c7caf4889d07458e4ea7b750eb5bd4565a835e76d46dcca558b292982a8d4d42bd3a8e3c82a4558ba109c5c2707fb
+  data.tar.gz: 177a474937fdb4dfa2f392d9c9ba7d298729b4f7ea8378d1842501147e6068e9e290eb64e9ec25f8cf25cf2c28dc9c5ec8e44d4881da8e23489c5264b454b31b

data/MIT-LICENSE

@@ -0,0 +1,20 @@
+Copyright 2014 YOURNAME
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/Rakefile

@@ -0,0 +1,32 @@
+begin
+  require 'bundler/setup'
+rescue LoadError
+  puts 'You must `gem install bundler` and `bundle install` to run rake tasks'
+end
+
+require 'rdoc/task'
+
+RDoc::Task.new(:rdoc) do |rdoc|
+  rdoc.rdoc_dir = 'rdoc'
+  rdoc.title    = 'CareBert'
+  rdoc.options << '--line-numbers'
+  rdoc.rdoc_files.include('README.rdoc')
+  rdoc.rdoc_files.include('lib/**/*.rb')
+end
+
+
+
+
+Bundler::GemHelper.install_tasks
+
+require 'rake/testtask'
+
+Rake::TestTask.new(:test) do |t|
+  t.libs << 'lib'
+  t.libs << 'test'
+  t.pattern = 'test/**/*_test.rb'
+  t.verbose = false
+end
+
+
+task default: :test

data/lib/care_bert/configuration.rb

@@ -0,0 +1,9 @@
+#require 'singleton'
+
+module CareBert
+
+  module Configuration
+    CHUNK_SIZE = 1000
+  end
+
+end

data/lib/care_bert/railtie.rb

@@ -0,0 +1,18 @@
+module CareBert
+  if defined? Rails::Railtie
+    require 'rails'
+    class Railtie < Rails::Railtie
+      rake_tasks do
+        load 'tasks/care_bert_tasks.rake'
+      end
+    end
+  end
+
+
+  #class Railtie
+    #def self.insert
+      #---
+    #end
+  #end
+
+end

data/lib/care_bert/reporter.rb

@@ -0,0 +1,76 @@
+module CareBert
+
+  module Reporter
+
+    def self.validate_models report
+      puts "-- records -     smells - model --"
+      report.each_key do |klass_name|
+        printf "%10d - %10d - %s\n", report[klass_name][:total], report[klass_name][:smell_count], klass_name
+      end
+
+      puts "\n\n"
+
+      report.each_key do |klass_name|
+        # check if smells present
+        if report[klass_name][:errors].present?
+          # print klass headline
+          puts "#{klass_name}: "
+          # sum up ids by error-construct
+          report[klass_name][:errors].each do |err, ids|
+            puts "#{err} >> #{ids}"
+          end
+          puts
+        end
+      end
+
+    end
+
+    def self.table_integrity report
+      puts "-- records - broken instances - model --"
+      anything_broken = false
+      report.each_key do |klass_name|
+        printf "%10d - %16d - %s\n", report[klass_name][:total], report[klass_name][:broken_instances].count, klass_name
+        anything_broken = true if report[klass_name][:broken_instances].count > 0
+      end
+
+      if anything_broken
+        puts "\n\n"
+        puts 'Listing ids of broken models:'
+        puts '-------------------------------'
+        report.each_key do |klass_name|
+          printf " -  %s\n    >> %s\n\n", klass_name, report[klass_name][:broken_instances]
+        end
+      end
+
+    end
+
+
+    def self.missing_assocs report
+      puts "-- records - broken instances - model --"
+      anything_broken = false
+      report.each_key do |klass_name|
+        printf "%10d - %16d - %s\n", report[klass_name][:total], report[klass_name][:smell_count], klass_name
+        anything_broken = true if report[klass_name][:errors].present?
+      end
+
+      if anything_broken
+        puts "\n\n"
+        puts 'Listing ids of missing model-instances of assocs:'
+        puts '-------------------------------------------------------'
+        report.each_key do |klass_name|
+          if report[klass_name][:errors].present?
+            puts "- #{klass_name} --------------"
+            sorted_keys = report[klass_name][:errors].keys.collect{|b| b.to_i}.sort
+            puts ">> affected_instances: #{sorted_keys}"
+            sorted_keys.each do |record_id|
+              printf " -  %s    >> %s\n", record_id, report[klass_name][:errors][record_id.to_s]
+            end
+          end
+        end
+      end
+
+    end
+
+  end
+
+end

data/lib/care_bert/sniffer.rb

@@ -0,0 +1,136 @@
+module CareBert
+
+  module Sniffer
+
+    # returns hash with data
+    def self.check_table_integrity
+      result = Hash.new
+
+      chunk_size = CareBert::Configuration::CHUNK_SIZE
+
+      Dir.glob(Rails.root.join('/app/models/**/*.rb')).each { |file| require file }
+      ActiveRecord::Base.descendants.select { |c| c.base_class == c}.sort_by(&:name).each do |klass|
+        total = klass.count
+
+        result[klass.name] = Hash.new
+        result[klass.name][:total] = total
+        result[klass.name][:broken_instances] = []
+
+
+        (total / chunk_size + 1).times do |i|
+          begin
+            chunk = klass.find(:all, :offset => (i * chunk_size), :limit => chunk_size)
+            chunk.to_a
+          rescue
+            #puts "Crashed while loading model #{klass.name}"
+            track_unloadable_instances(klass, offset..(offset + chunk_size - 1)).each do |id|
+              result[klass.name][:broken_instances] << id
+            end
+          end
+        end
+        result[klass.name][:broken_instances].sort!
+      end
+      result
+    end
+
+
+
+    # inspired from from: http://blog.hasmanythrough.com/2006/8/27/validate-all-your-records
+    def self.validate_models
+      result = Hash.new
+
+      chunk_size = CareBert::Configuration::CHUNK_SIZE
+
+      Dir.glob(Rails.root.join('/app/models/**/*.rb')).each { |file| require file }
+      ActiveRecord::Base.descendants.select { |c| c.base_class == c }.sort_by(&:name).each do |klass|
+        result[klass.name] = {
+            total: klass.count,
+            smell_count: 0, # max klass.count
+            errors: Hash.new # max klass.count
+        }
+
+
+        (result[klass.name][:total] / chunk_size + 1).times do |i|
+          chunk = klass.find(:all, :offset => (i * chunk_size), :limit => chunk_size)
+          chunk.reject(&:valid?).each do |record|
+            result[klass.name][:smell_count] += 1
+            errors_key = record.errors.full_messages || ['unknown validation error!?']
+            unless result[klass.name][:errors].has_key? errors_key
+              result[klass.name][:errors][errors_key] = []
+            end
+            result[klass.name][:errors][errors_key] << record.id
+          end rescue nil
+          result[klass.name][:errors].select {|err| !err.nil? }.each {|err| result[klass.name][:errors][err].sort! }
+        end
+      end
+
+      result
+    end
+
+
+
+    def self.check_missing_assocs
+      result = Hash.new
+
+      chunk_size = CareBert::Configuration::CHUNK_SIZE
+
+      Dir.glob(Rails.root.join('/app/models/**/*.rb')).each { |file| require file }
+      ActiveRecord::Base.descendants.select { |c| c.base_class == c }.sort_by(&:name).each do |klass|
+        result[klass.name] = {
+            total: klass.count,
+            smell_count: 0, # max klass.count
+            errors: Hash.new # max klass.count
+        }
+
+
+        (result[klass.name][:total] / chunk_size + 1).times do |i|
+          chunk = klass.find(:all, :offset => (i * chunk_size), :limit => chunk_size)
+          chunk.each do |record|
+
+            failing_fields = {}
+
+            [:belongs_to].each do |assoc_type| # optional => :has_one
+              fields = klass.reflect_on_all_associations(assoc_type).collect { |field| field.name }
+
+              fields.each do |field|
+                #puts "Check #{klass.name} => #{field}"
+
+                id_field = "#{field}_id"
+                if record.respond_to?(id_field)
+                  foreign_id = record.send(id_field)
+                  if foreign_id.present? && record.send(field).blank?
+                    failing_fields[field] = foreign_id
+                    result[klass.name][:smell_count] += 1
+                  end
+                end
+              end
+            end
+
+            result[klass.name][:errors][record.id.to_s] = failing_fields if failing_fields.present?
+          end rescue nil
+        end
+
+      end
+      result
+    end
+
+
+
+
+    def self.track_unloadable_instances klass, id_range
+      result = []
+      id_range.each do |id|
+        begin
+          klass.find(id)
+        rescue
+          result << id
+        end
+      end
+      result
+    end
+
+
+  end
+
+
+end

data/lib/care_bert/version.rb

@@ -0,0 +1,3 @@
+module CareBert
+  VERSION = '0.0.2'
+end

data/lib/care_bert.rb

@@ -0,0 +1,16 @@
+require 'care_bert/configuration'
+require 'care_bert/sniffer'
+require 'care_bert/reporter'
+
+
+module CareBert
+
+
+  # load Railtie if Rails exists
+  if defined?(Rails)
+    require 'care_bert/railtie'
+    #CareBert::Railtie.insert
+  end
+
+
+end

data/lib/tasks/care_bert_tasks.rake

@@ -0,0 +1,33 @@
+require 'care_bert'
+
+#desc "Explaining what the task does"
+#task :care_bert do
+#   # Task goes here
+#  puts "success"
+#end
+
+
+# file: validate_models.rake
+# task: rake db:validate_models
+namespace :care_bert do
+  desc "Run model validations on all model records in database"
+  task :validate_models => :environment do
+    # ANALYZE all
+    report = CareBert::Sniffer.validate_models
+    CareBert::Reporter.validate_models report
+  end
+
+  desc "Tries to load all instances and tracks failures on load"
+  task :table_integrity => :environment do
+    report = CareBert::Sniffer.check_table_integrity
+    CareBert::Reporter.table_integrity report
+  end
+
+  desc "Checks all belongs_to-associations of all instances and checks presence of model if foreign-key is set"
+  task :missing_assocs => :environment do
+    report = CareBert::Sniffer.check_missing_assocs
+    CareBert::Reporter.missing_assocs report
+  end
+
+
+end

data/test/care_bert_test.rb

@@ -0,0 +1,7 @@
+require 'test_helper'
+
+class CareBertTest < ActiveSupport::TestCase
+  test "truth" do
+    assert_kind_of Module, CareBert
+  end
+end

data/test/dummy/README.rdoc

@@ -0,0 +1,28 @@
+== README
+
+This README would normally document whatever steps are necessary to get the
+application up and running.
+
+Things you may want to cover:
+
+* Ruby version
+
+* System dependencies
+
+* Configuration
+
+* Database creation
+
+* Database initialization
+
+* How to run the test suite
+
+* Services (job queues, cache servers, search engines, etc.)
+
+* Deployment instructions
+
+* ...
+
+
+Please feel free to use a different markup language if you do not plan to run
+<tt>rake doc:app</tt>.

data/test/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Rails.application.load_tasks

data/test/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/sstephenson/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

data/test/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any styles
+ * defined in the other CSS/SCSS files in this directory. It is generally better to create a new
+ * file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

data/test/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,5 @@
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+end

data/test/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/test/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    'application', media: 'all', 'data-turbolinks-track' => true %>
+  <%= javascript_include_tag 'application', 'data-turbolinks-track' => true %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/test/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/test/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application',  __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/test/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/test/dummy/config/application.rb

@@ -0,0 +1,23 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "care_bert"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+  end
+end
+

data/test/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/test/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/test/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,37 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,78 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this).
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Generate digests for assets URLs.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Set to :debug to see everything in the log.
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Disable automatic flushing of the log to improve performance.
+  # config.autoflush_log = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,39 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  config.serve_static_assets  = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/initializers/assets.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/test/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/test/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/test/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/test/dummy/config/routes.rb

@@ -0,0 +1,56 @@
+Rails.application.routes.draw do
+  # The priority is based upon order of creation: first created -> highest priority.
+  # See how all your routes lay out with "rake routes".
+
+  # You can have the root of your site routed with "root"
+  # root 'welcome#index'
+
+  # Example of regular route:
+  #   get 'products/:id' => 'catalog#view'
+
+  # Example of named route that can be invoked with purchase_url(id: product.id)
+  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
+
+  # Example resource route (maps HTTP verbs to controller actions automatically):
+  #   resources :products
+
+  # Example resource route with options:
+  #   resources :products do
+  #     member do
+  #       get 'short'
+  #       post 'toggle'
+  #     end
+  #
+  #     collection do
+  #       get 'sold'
+  #     end
+  #   end
+
+  # Example resource route with sub-resources:
+  #   resources :products do
+  #     resources :comments, :sales
+  #     resource :seller
+  #   end
+
+  # Example resource route with more complex sub-resources:
+  #   resources :products do
+  #     resources :comments
+  #     resources :sales do
+  #       get 'recent', on: :collection
+  #     end
+  #   end
+
+  # Example resource route with concerns:
+  #   concern :toggleable do
+  #     post 'toggle'
+  #   end
+  #   resources :posts, concerns: :toggleable
+  #   resources :photos, concerns: :toggleable
+
+  # Example resource route within a namespace:
+  #   namespace :admin do
+  #     # Directs /admin/products/* to Admin::ProductsController
+  #     # (app/controllers/admin/products_controller.rb)
+  #     resources :products
+  #   end
+end

data/test/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: 0b6d1756367ebac690aa1c3550b6668f347d09ea45223f58c39b4df1785430508976b4fdea47ebc57b8e4839ac5038d541e2fd1ab9279135ad9081bf5da7a529
+
+test:
+  secret_key_base: 2fd787cf27cfce0e03b7a8fffa4aa22de561b570ea5ab4dc962ebede9030b260ffc8f86ed9c167cac179c1a39abdefc453b29884ea67264f0d48740ae6d56926
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/test/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment',  __FILE__)
+run Rails.application

data/test/dummy/log/test.log

@@ -0,0 +1,10 @@
+   (0.2ms)  begin transaction
+------------------------
+CareBertTest: test_truth
+------------------------
+   (0.1ms)  rollback transaction
+   (0.1ms)  begin transaction
+------------------------
+CareBertTest: test_truth
+------------------------
+   (0.2ms)  rollback transaction

data/test/dummy/public/404.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <div>
+      <h1>The page you were looking for doesn't exist.</h1>
+      <p>You may have mistyped the address or the page may have moved.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/dummy/public/422.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The change you wanted was rejected (422)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/422.html -->
+  <div class="dialog">
+    <div>
+      <h1>The change you wanted was rejected.</h1>
+      <p>Maybe you tried to change something you didn't have access to.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/dummy/public/500.html

@@ -0,0 +1,66 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>We're sorry, but something went wrong (500)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/500.html -->
+  <div class="dialog">
+    <div>
+      <h1>We're sorry, but something went wrong.</h1>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/test_helper.rb

@@ -0,0 +1,15 @@
+# Configure Rails Environment
+ENV["RAILS_ENV"] = "test"
+
+require File.expand_path("../dummy/config/environment.rb",  __FILE__)
+require "rails/test_help"
+
+Rails.backtrace_cleaner.remove_silencers!
+
+# Load support files
+Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each { |f| require f }
+
+# Load fixtures from the engine
+if ActiveSupport::TestCase.method_defined?(:fixture_path=)
+  ActiveSupport::TestCase.fixture_path = File.expand_path("../fixtures", __FILE__)
+end

metadata

@@ -0,0 +1,155 @@
+--- !ruby/object:Gem::Specification
+name: care_bert
+version: !ruby/object:Gem::Version
+  version: 0.0.2
+platform: ruby
+authors:
+- Daniel Loy
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2014-10-02 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: rails
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: sqlite3
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+description: more Description of CareBert.
+email:
+- loybert@gmail.com
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- MIT-LICENSE
+- Rakefile
+- lib/care_bert.rb
+- lib/care_bert/configuration.rb
+- lib/care_bert/railtie.rb
+- lib/care_bert/reporter.rb
+- lib/care_bert/sniffer.rb
+- lib/care_bert/version.rb
+- lib/tasks/care_bert_tasks.rake
+- test/care_bert_test.rb
+- test/dummy/README.rdoc
+- test/dummy/Rakefile
+- test/dummy/app/assets/javascripts/application.js
+- test/dummy/app/assets/stylesheets/application.css
+- test/dummy/app/controllers/application_controller.rb
+- test/dummy/app/helpers/application_helper.rb
+- test/dummy/app/views/layouts/application.html.erb
+- test/dummy/bin/bundle
+- test/dummy/bin/rails
+- test/dummy/bin/rake
+- test/dummy/config.ru
+- test/dummy/config/application.rb
+- test/dummy/config/boot.rb
+- test/dummy/config/database.yml
+- test/dummy/config/environment.rb
+- test/dummy/config/environments/development.rb
+- test/dummy/config/environments/production.rb
+- test/dummy/config/environments/test.rb
+- test/dummy/config/initializers/assets.rb
+- test/dummy/config/initializers/backtrace_silencers.rb
+- test/dummy/config/initializers/cookies_serializer.rb
+- test/dummy/config/initializers/filter_parameter_logging.rb
+- test/dummy/config/initializers/inflections.rb
+- test/dummy/config/initializers/mime_types.rb
+- test/dummy/config/initializers/session_store.rb
+- test/dummy/config/initializers/wrap_parameters.rb
+- test/dummy/config/locales/en.yml
+- test/dummy/config/routes.rb
+- test/dummy/config/secrets.yml
+- test/dummy/db/test.sqlite3
+- test/dummy/log/test.log
+- test/dummy/public/404.html
+- test/dummy/public/422.html
+- test/dummy/public/500.html
+- test/dummy/public/favicon.ico
+- test/test_helper.rb
+homepage: https://github.com/loybert
+licenses:
+- MIT
+metadata: {}
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 2.4.1
+signing_key: 
+specification_version: 4
+summary: CareBert takes care of the validation state of your current database items
+test_files:
+- test/care_bert_test.rb
+- test/dummy/app/assets/javascripts/application.js
+- test/dummy/app/assets/stylesheets/application.css
+- test/dummy/app/controllers/application_controller.rb
+- test/dummy/app/helpers/application_helper.rb
+- test/dummy/app/views/layouts/application.html.erb
+- test/dummy/bin/bundle
+- test/dummy/bin/rails
+- test/dummy/bin/rake
+- test/dummy/config/application.rb
+- test/dummy/config/boot.rb
+- test/dummy/config/database.yml
+- test/dummy/config/environment.rb
+- test/dummy/config/environments/development.rb
+- test/dummy/config/environments/production.rb
+- test/dummy/config/environments/test.rb
+- test/dummy/config/initializers/assets.rb
+- test/dummy/config/initializers/backtrace_silencers.rb
+- test/dummy/config/initializers/cookies_serializer.rb
+- test/dummy/config/initializers/filter_parameter_logging.rb
+- test/dummy/config/initializers/inflections.rb
+- test/dummy/config/initializers/mime_types.rb
+- test/dummy/config/initializers/session_store.rb
+- test/dummy/config/initializers/wrap_parameters.rb
+- test/dummy/config/locales/en.yml
+- test/dummy/config/routes.rb
+- test/dummy/config/secrets.yml
+- test/dummy/config.ru
+- test/dummy/db/test.sqlite3
+- test/dummy/log/test.log
+- test/dummy/public/404.html
+- test/dummy/public/422.html
+- test/dummy/public/500.html
+- test/dummy/public/favicon.ico
+- test/dummy/Rakefile
+- test/dummy/README.rdoc
+- test/test_helper.rb