card-mod-script 0.14.2 → 0.15.0

data/assets/script/decko/slotter.js.coffee

@@ -1,268 +0,0 @@
-# There are three places that can control what happens after an ajax request
-#  1. the element that triggered the request (eg. a link or a button)
-#  2. the closest ".slotter" element
-#      (if the trigger itself isn't a slotter,
-#       a common example is that a form is a slotter but the form buttons aren't)
-#  3. the slot returned by the request
-#
-# A slot is an element marked with "card-slot" class, a slotter has a "slotter" class.
-# By the default, the closest slot of the slotter is replaced with the new slot that the
-# request returned. The behavior can be changed with css classes and data attributes.
-#
-#  To 1. The trigger element has only a few options to override the slotter.
-#    classes:
-#    "_close-modal-on-success"
-#    "_close-overlay-on-success"
-#    "_update-origin"
-#
-#  To 2. The slotter is the standard way to define what happens with request result
-#    data:
-#    slot-selector
-#        a css selector that defines which slot will be replaced.
-#        You can also use "modal-origin" and "overlay-origin" to refer to the origin slots.
-#    slot-success-selector/slot-error-selector
-#        the same as slot-selector but only used
-#        for success case or error case, respectively
-#    update-foreign-slot
-#        a css selector to specify an additional slot that will be
-#        updated after the request.
-#    update-foreign-slot-url
-#        a url to fetch the new content for the additional slot
-#        if not given the slot is updated with the same card and view that was used before
-#    update-origin
-#        if present then the slot from where the current modal or overlay slot was opened
-#        will be updated
-#    slotter-mode
-#        possible values are
-#          replace (default)
-#             replace the closest slot with new slot
-#          modal
-#             show new slot in modal; if there is already a modal then put it on top
-#           modal-replace
-#             replace existing modal
-#          overlay
-#             show new slot in overlay
-#          update-origin
-#             update closest slot of the slotter that opened the modal or overlay
-#             (assumes that the request was triggered from a modal or overlay)
-#             If you need the update-origin mode together with another mode then use
-#             data-update-origin="true".
-#          silent-success
-#             do nothing
-#
-#    classes:
-#    _close-overlay
-#    _close-modal
-#
-#   To 3. Similar as 1, the slot has only overlay and modal options.
-#     classes:
-#     _modal
-#        show slot in modal
-#     _overlay
-#        show slot in overlay
-#
-#
-$(window).ready ->
-  $('body').on 'ajax:success', '.slotter', (event, data) ->
-    $(this).slotterSuccess event, data
-
-  $('body').on 'ajax:error', '.slotter', (event, xhr) ->
-    $(this).showErrorResponse xhr.status, xhr.responseText
-
-  $('body').on 'click', 'button.slotter', (event)->
-    return false if !$.rails.allowAction $(this)
-    $.rails.handleRemote $(this)
-
-  $('body').on 'click', '._clickable.slotter', (event)->
-    $(this)[0].href = $(this).attr("href") # that's where rails.handleRemote
-                                           # expects the url
-    $.rails.handleRemote $(this)
-
-  $('body').on 'click', '[data-dismiss="overlay"]', (event) ->
-    $(this).findSlot(".card-slot._overlay").removeOverlay()
-
-  $('body').on 'click', '._close-overlay-on-success', (event) ->
-    $(this).closeOnSuccess("overlay")
-
-  $('body').on 'click', '._close-modal-on-success', (event) ->
-    $(this).closeOnSuccess("modal")
-
-  $('body').on 'click', '._close-on-success', (event) ->
-    $(this).closeOnSuccess()
-
-  $('body').on 'click', '._update-origin', (event) ->
-    $(this).closest('.slotter').data("slotter-mode", "update-origin")
-
-  $('body').on 'submit', 'form.slotter', (event)->
-    form = $(this)
-    if form.data("main-success") and form.isMainOrMainModal()
-      form.mainSuccess()
-    if form.data('recaptcha') == 'on'
-      return form.handleRecaptchaBeforeSubmit(event)
-
-  $('body').on 'ajax:beforeSend', '.slotter', (event, xhr, opt)->
-    $(this).slotterBeforeSend opt
-
-jQuery.fn.extend
-  mainSuccess: ()->
-    form = $(this)
-    $.each form.data("main-success"), (key, value)->
-      inputSelector = "[name=success\\[" + key + "\\]]"
-      input = form.find inputSelector
-      unless input[0]
-        input = $('<input type="hidden" name="success[' + key + ']"/>')
-        form.append input
-      input.val value
-
-  slotterSuccess: (event, responseData) ->
-    debugger
-    unless @hasClass("slotter")
-      console.log "warning: slotterSuccess called on non-slotter element #{this}"
-      return
-
-    return if event.slotSuccessful
-
-    @showSuccessResponse responseData, @data("slotter-mode")
-
-    if @hasClass "_close-overlay"
-      @removeOverlay()
-    if @hasClass "_close-modal"
-      @closest('.modal').modal('hide')
-
-    # should scroll to top after clicking on new page
-    if @hasClass "card-paging-link"
-      slot_top_pos = @slot().offset().top
-      $("body").scrollTop slot_top_pos
-    if @data("update-foreign-slot")
-      $slot = @findSlot @data("update-foreign-slot")
-      reload_url = @data("update-foreign-slot-url")
-      $slot.reloadSlot reload_url
-
-    if @data('original-slotter-mode')
-      @attr 'data-slotter-mode', @data('original-slotter-mode')
-    if @data('original-slot-selector')
-      @attr 'data-slot-selector', @data('original-slot-selector')
-
-    event.slotSuccessful = true
-
-  showSuccessResponse: (responseData, mode) ->
-    if responseData.redirect
-      window.location = responseData.redirect
-    else if responseData.reload
-      window.location.reload(true)
-    else
-      switch mode
-        when "silent-success" then return
-        when "update-modal-origin" then @updateModalOrigin()
-        when "update-origin" then @updateOrigin()
-        else @updateSlot responseData, mode
-
-  showErrorResponse: (status, result) ->
-    if status == 403 #permission denied
-      $(result).showAsModal $(this)
-    else if status == 900
-      $(result).showAsModal $(this)
-    else
-      @notify result, "error"
-
-      if status == 409 #edit conflict
-        @slot().find('.current_revision_id').val(
-          @slot().find('.new-current-revision-id').text()
-        )
-
-  updateModalOrigin: () ->
-    if @overlaySlot()
-      overlayOrigin = @findOriginSlot("overlay")
-      overlayOrigin.updateOrigin()
-    else if @closest("#modal-container")[0]
-      @updateOrigin()
-
-  updateOrigin: () ->
-    type = if @overlaySlot()
-      "overlay"
-    else if @closest("#modal-container")[0]
-      "modal"
-
-    return unless type?
-
-    origin = @findOriginSlot(type)
-    if origin && origin[0]?
-      origin.reloadSlot()
-
-  registerAsOrigin: (type, slot) ->
-    if slot.hasClass("_modal-slot")
-      slot = slot.find(".modal-body")  # put the origin slot id on the modal-body instead
-                                        # of on the slot, so that it survives slot reloads
-    slot.attr("data-#{type}-origin-slot-id", @closest(".card-slot").data("slot-id"))
-
-  updateSlot: (newContent, mode) ->
-    mode ||= "replace"
-    @setSlotContent newContent, mode, $(this)
-
-  # close modal or overlay
-  closeOnSuccess: (type) ->
-    slotter = @closest('.slotter')
-    if !type?
-      type = if @isInOverlay() then "overlay" else "modal"
-    slotter.addClass "_close-#{type}"
-
-  slotterBeforeSend: (opt) ->
-    return if opt.skip_before_send
-
-    # avoiding duplication. could be better test?
-    unless (opt.url.match(/home_view/) or @data("slotter-mode") == "modal")
-      opt.url = decko.slotPath opt.url, @slot()
-
-    if @is('form')
-      if data = @data 'file-data'
-# NOTE - this entire solution is temporary.
-        @uploadWithBlueimp(data, opt)
-        false
-
-  uploadWithBlueimp: (data, opt) ->
-    input = @find '.file-upload'
-    if input[1]
-      @notify(
-        "Decko does not yet support multiple files in a single form.",
-        "error"
-      )
-      return false
-
-    widget = input.data 'wblueimpFileupload' #jQuery UI widget
-
-    # browsers that can't do ajax uploads use iframe
-    unless widget._isXHRUpload(widget.options)
-      # can't do normal redirects.
-      @find('[name=success]').val('_self')
-      # iframe response not passed back;
-      # all responses treated as success.  boo
-      opt.url += '&simulate_xhr=true'
-      # iframe is not xhr request,
-      # so would otherwise get full response with layout
-      iframeUploadFilter = (data)-> data.find('body').html()
-      opt.dataFilter = iframeUploadFilter
-    # gets rid of default html and body tags
-
-    args = $.extend opt, (widget._getAJAXSettings data), url: opt.url
-    # combines settings from decko's slotter and jQuery UI's upload widget
-    args.skip_before_send = true #avoid looping through this method again
-
-    $.ajax( args )
-
-  handleRecaptchaBeforeSubmit: (event) ->
-    recaptcha = @find("input._recaptcha-token")
-
-    if !recaptcha[0]?
-      # monkey error (bad form)
-      recaptcha.val "recaptcha-token-field-missing"
-    else if recaptcha.hasClass "_token-updated"
-      # recaptcha token is fine - continue submitting
-      recaptcha.removeClass "_token-updated"
-    else if !grecaptcha?
-      # shark error (probably recaptcha keys of pre v3 version)
-      recaptcha.val "grecaptcha-undefined"
-    else
-      @updateRecaptchaToken(event)
-      # this stops the submit here
-      # and submits again when the token is ready
-

data/assets/script/decko/type_editor.js.coffee

@@ -1,21 +0,0 @@
-$(window).ready ->
-  $('body').on  "change", '._live-type-field', ->
-    $this = $(this)
-
-    setSlotMode($this)
-    debugger
-    $this.data 'params', $this.closest('form').serialize()
-    $this.data 'url', $this.attr 'href'
-
-  $('body').on 'change', '.edit-type-field', ->
-    $(this).closest('form').submit()
-
-setSlotMode = ($el, mode=null) ->
-  $slotter =  $el.closest(".slotter")
-  if $slotter.length
-    if $slotter.attr('data-slotter-mode')
-      $slotter.attr 'data-original-slotter-mode', $slotter.attr('data-slotter-mode')
-      $slotter.attr 'data-slotter-mode', mode
-    if $slotter.attr('data-slot-selector')
-      $slotter.attr 'data-original-slot-selector', $slotter.attr('data-slot-selector')
-      $slotter.removeAttr 'data-slot-selector'

data/assets/script/decko/upload.js.coffee

@@ -1,64 +0,0 @@
-$.extend decko,
-  upload_file: (fileupload) ->
-    # for file as a subcard in a form,
-    # excess parameters are included in the request which cause errors.
-    # only the file, type_id and attachment_card_name are needed
-    # attachment_card_name is the original card name,
-    # ex: card[subcards][+logo][image], card[file]
-    $(fileupload).on 'fileuploadsubmit', (e,data) ->
-      $_this = $(this)
-      card_name = $_this.siblings(".attachment_card_name:first").attr("name")
-      type_id = $_this.siblings("#attachment_type_id").val()
-      data.formData = {
-        "card[type_id]": type_id,
-        "attachment_upload": card_name
-      }
-    $_fileupload = $(fileupload)
-    if $_fileupload.closest("form").attr("action").indexOf("update") > -1
-      url = "card/update/"+$(fileupload).siblings("#file_card_name").val()
-    else
-      url = "card/create"
-    $(fileupload).fileupload(
-      url: decko.path(url),
-      dataType: 'html',
-      done: decko.doneFile,
-      add: decko.chooseFile,
-      progressall: decko.progressallFile
-    )#, forceIframeTransport: true )
-
-  chooseFile: (e, data) ->
-    data.form.find('button[type=submit]').attr('disabled',true)
-    editor = $(this).closest '.card-editor'
-    $('#progress').show()
-    editor.append '<input type="hidden" class="extra_upload_param" ' +
-                  'value="true" name="attachment_upload">'
-    editor.append '<input type="hidden" class="extra_upload_param" ' +
-                  'value="preview_editor" name="view">'
-    data.submit()
-    editor.find('.choose-file').hide()
-    # editor.find(".file-upload").prop "disabled", true
-    editor.find('.extra_upload_param').remove()
-
-  progressallFile: (e, data) ->
-    progress = parseInt(data.loaded / data.total * 100, 10)
-    $('#progress .progress-bar').css('width', progress + '%')
-
-  doneFile: (e, data) ->
-    editor = $(this).closest '.card-editor'
-    editor.find('.chosen-file').replaceWith data.result
-    data.form.find('button[type=submit]').attr('disabled',false)
-
-$(window).ready ->
-  $('body').on 'click', '.cancel-upload', ->
-    editor = $(this).closest '.card-editor'
-    editor.find('.choose-file').show()
-    # editor.find(".file-upload").prop "disabled", false
-    editor.find('.chosen-file').empty()
-    editor.find('.progress').show()
-    editor.find('#progress .progress-bar').css('width', '0%')
-    editor.find('#progress').hide()
-
-  $('body').on "submit", "form", ->
-    uploader = $(this).find ".file-upload[type=file]"
-    if uploader[0]
-      uploader.prop "disabled", true