capydash 0.1.2 → 0.1.3

data/dashboard/node_modules/nanoid/index.cjs

@@ -1,85 +0,0 @@
-let crypto = require('crypto')
-
-let { urlAlphabet } = require('./url-alphabet/index.cjs')
-
-// It is best to make fewer, larger requests to the crypto module to
-// avoid system call overhead. So, random numbers are generated in a
-// pool. The pool is a Buffer that is larger than the initial random
-// request size by this multiplier. The pool is enlarged if subsequent
-// requests exceed the maximum buffer size.
-const POOL_SIZE_MULTIPLIER = 128
-let pool, poolOffset
-
-let fillPool = bytes => {
-  if (!pool || pool.length < bytes) {
-    pool = Buffer.allocUnsafe(bytes * POOL_SIZE_MULTIPLIER)
-    crypto.randomFillSync(pool)
-    poolOffset = 0
-  } else if (poolOffset + bytes > pool.length) {
-    crypto.randomFillSync(pool)
-    poolOffset = 0
-  }
-  poolOffset += bytes
-}
-
-let random = bytes => {
-  // `|=` convert `bytes` to number to prevent `valueOf` abusing and pool pollution
-  fillPool((bytes |= 0))
-  return pool.subarray(poolOffset - bytes, poolOffset)
-}
-
-let customRandom = (alphabet, defaultSize, getRandom) => {
-  // First, a bitmask is necessary to generate the ID. The bitmask makes bytes
-  // values closer to the alphabet size. The bitmask calculates the closest
-  // `2^31 - 1` number, which exceeds the alphabet size.
-  // For example, the bitmask for the alphabet size 30 is 31 (00011111).
-  let mask = (2 << (31 - Math.clz32((alphabet.length - 1) | 1))) - 1
-  // Though, the bitmask solution is not perfect since the bytes exceeding
-  // the alphabet size are refused. Therefore, to reliably generate the ID,
-  // the random bytes redundancy has to be satisfied.
-
-  // Note: every hardware random generator call is performance expensive,
-  // because the system call for entropy collection takes a lot of time.
-  // So, to avoid additional system calls, extra bytes are requested in advance.
-
-  // Next, a step determines how many random bytes to generate.
-  // The number of random bytes gets decided upon the ID size, mask,
-  // alphabet size, and magic number 1.6 (using 1.6 peaks at performance
-  // according to benchmarks).
-  let step = Math.ceil((1.6 * mask * defaultSize) / alphabet.length)
-
-  return (size = defaultSize) => {
-    let id = ''
-    while (true) {
-      let bytes = getRandom(step)
-      // A compact alternative for `for (let i = 0; i < step; i++)`.
-      let i = step
-      while (i--) {
-        // Adding `|| ''` refuses a random byte that exceeds the alphabet size.
-        id += alphabet[bytes[i] & mask] || ''
-        if (id.length === size) return id
-      }
-    }
-  }
-}
-
-let customAlphabet = (alphabet, size = 21) =>
-  customRandom(alphabet, size, random)
-
-let nanoid = (size = 21) => {
-  // `|=` convert `size` to number to prevent `valueOf` abusing and pool pollution
-  fillPool((size |= 0))
-  let id = ''
-  // We are reading directly from the random pool to avoid creating new array
-  for (let i = poolOffset - size; i < poolOffset; i++) {
-    // It is incorrect to use bytes exceeding the alphabet size.
-    // The following mask reduces the random byte in the 0-255 value
-    // range to the 0-63 value range. Therefore, adding hacks, such
-    // as empty string fallback or magic numbers, is unneccessary because
-    // the bitmask trims bytes down to the alphabet size.
-    id += urlAlphabet[pool[i] & 63]
-  }
-  return id
-}
-
-module.exports = { nanoid, customAlphabet, customRandom, urlAlphabet, random }

data/dashboard/node_modules/nanoid/index.d.cts

@@ -1,91 +0,0 @@
-/**
- * Generate secure URL-friendly unique ID.
- *
- * By default, the ID will have 21 symbols to have a collision probability
- * similar to UUID v4.
- *
- * ```js
- * import { nanoid } from 'nanoid'
- * model.id = nanoid() //=> "Uakgb_J5m9g-0JDMbcJqL"
- * ```
- *
- * @param size Size of the ID. The default size is 21.
- * @returns A random string.
- */
-export function nanoid(size?: number): string
-
-/**
- * Generate secure unique ID with custom alphabet.
- *
- * Alphabet must contain 256 symbols or less. Otherwise, the generator
- * will not be secure.
- *
- * @param alphabet Alphabet used to generate the ID.
- * @param defaultSize Size of the ID. The default size is 21.
- * @returns A random string generator.
- *
- * ```js
- * const { customAlphabet } = require('nanoid')
- * const nanoid = customAlphabet('0123456789абвгдеё', 5)
- * nanoid() //=> "8ё56а"
- * ```
- */
-export function customAlphabet(
-  alphabet: string,
-  defaultSize?: number
-): (size?: number) => string
-
-/**
- * Generate unique ID with custom random generator and alphabet.
- *
- * Alphabet must contain 256 symbols or less. Otherwise, the generator
- * will not be secure.
- *
- * ```js
- * import { customRandom } from 'nanoid/format'
- *
- * const nanoid = customRandom('abcdef', 5, size => {
- *   const random = []
- *   for (let i = 0; i < size; i++) {
- *     random.push(randomByte())
- *   }
- *   return random
- * })
- *
- * nanoid() //=> "fbaef"
- * ```
- *
- * @param alphabet Alphabet used to generate a random string.
- * @param size Size of the random string.
- * @param random A random bytes generator.
- * @returns A random string generator.
- */
-export function customRandom(
-  alphabet: string,
-  size: number,
-  random: (bytes: number) => Uint8Array
-): () => string
-
-/**
- * URL safe symbols.
- *
- * ```js
- * import { urlAlphabet } from 'nanoid'
- * const nanoid = customAlphabet(urlAlphabet, 10)
- * nanoid() //=> "Uakgb_J5m9"
- * ```
- */
-export const urlAlphabet: string
-
-/**
- * Generate an array of random bytes collected from hardware noise.
- *
- * ```js
- * import { customRandom, random } from 'nanoid'
- * const nanoid = customRandom("abcdef", 5, random)
- * ```
- *
- * @param bytes Size of the array.
- * @returns An array of random bytes.
- */
-export function random(bytes: number): Uint8Array

data/dashboard/node_modules/nanoid/index.d.ts

@@ -1,91 +0,0 @@
-/**
- * Generate secure URL-friendly unique ID.
- *
- * By default, the ID will have 21 symbols to have a collision probability
- * similar to UUID v4.
- *
- * ```js
- * import { nanoid } from 'nanoid'
- * model.id = nanoid() //=> "Uakgb_J5m9g-0JDMbcJqL"
- * ```
- *
- * @param size Size of the ID. The default size is 21.
- * @returns A random string.
- */
-export function nanoid(size?: number): string
-
-/**
- * Generate secure unique ID with custom alphabet.
- *
- * Alphabet must contain 256 symbols or less. Otherwise, the generator
- * will not be secure.
- *
- * @param alphabet Alphabet used to generate the ID.
- * @param defaultSize Size of the ID. The default size is 21.
- * @returns A random string generator.
- *
- * ```js
- * const { customAlphabet } = require('nanoid')
- * const nanoid = customAlphabet('0123456789абвгдеё', 5)
- * nanoid() //=> "8ё56а"
- * ```
- */
-export function customAlphabet(
-  alphabet: string,
-  defaultSize?: number
-): (size?: number) => string
-
-/**
- * Generate unique ID with custom random generator and alphabet.
- *
- * Alphabet must contain 256 symbols or less. Otherwise, the generator
- * will not be secure.
- *
- * ```js
- * import { customRandom } from 'nanoid/format'
- *
- * const nanoid = customRandom('abcdef', 5, size => {
- *   const random = []
- *   for (let i = 0; i < size; i++) {
- *     random.push(randomByte())
- *   }
- *   return random
- * })
- *
- * nanoid() //=> "fbaef"
- * ```
- *
- * @param alphabet Alphabet used to generate a random string.
- * @param size Size of the random string.
- * @param random A random bytes generator.
- * @returns A random string generator.
- */
-export function customRandom(
-  alphabet: string,
-  size: number,
-  random: (bytes: number) => Uint8Array
-): () => string
-
-/**
- * URL safe symbols.
- *
- * ```js
- * import { urlAlphabet } from 'nanoid'
- * const nanoid = customAlphabet(urlAlphabet, 10)
- * nanoid() //=> "Uakgb_J5m9"
- * ```
- */
-export const urlAlphabet: string
-
-/**
- * Generate an array of random bytes collected from hardware noise.
- *
- * ```js
- * import { customRandom, random } from 'nanoid'
- * const nanoid = customRandom("abcdef", 5, random)
- * ```
- *
- * @param bytes Size of the array.
- * @returns An array of random bytes.
- */
-export function random(bytes: number): Uint8Array

data/dashboard/node_modules/nanoid/index.js

@@ -1,45 +0,0 @@
-import crypto from 'crypto'
-import { urlAlphabet } from './url-alphabet/index.js'
-const POOL_SIZE_MULTIPLIER = 128
-let pool, poolOffset
-let fillPool = bytes => {
-  if (!pool || pool.length < bytes) {
-    pool = Buffer.allocUnsafe(bytes * POOL_SIZE_MULTIPLIER)
-    crypto.randomFillSync(pool)
-    poolOffset = 0
-  } else if (poolOffset + bytes > pool.length) {
-    crypto.randomFillSync(pool)
-    poolOffset = 0
-  }
-  poolOffset += bytes
-}
-let random = bytes => {
-  fillPool((bytes |= 0))
-  return pool.subarray(poolOffset - bytes, poolOffset)
-}
-let customRandom = (alphabet, defaultSize, getRandom) => {
-  let mask = (2 << (31 - Math.clz32((alphabet.length - 1) | 1))) - 1
-  let step = Math.ceil((1.6 * mask * defaultSize) / alphabet.length)
-  return (size = defaultSize) => {
-    let id = ''
-    while (true) {
-      let bytes = getRandom(step)
-      let i = step
-      while (i--) {
-        id += alphabet[bytes[i] & mask] || ''
-        if (id.length === size) return id
-      }
-    }
-  }
-}
-let customAlphabet = (alphabet, size = 21) =>
-  customRandom(alphabet, size, random)
-let nanoid = (size = 21) => {
-  fillPool((size |= 0))
-  let id = ''
-  for (let i = poolOffset - size; i < poolOffset; i++) {
-    id += urlAlphabet[pool[i] & 63]
-  }
-  return id
-}
-export { nanoid, customAlphabet, customRandom, urlAlphabet, random }

data/dashboard/node_modules/nanoid/nanoid.js

@@ -1 +0,0 @@
-export let nanoid=(t=21)=>crypto.getRandomValues(new Uint8Array(t)).reduce(((t,e)=>t+=(e&=63)<36?e.toString(36):e<62?(e-26).toString(36).toUpperCase():e<63?"_":"-"),"");

data/dashboard/node_modules/nanoid/non-secure/index.cjs

@@ -1,34 +0,0 @@
-// This alphabet uses `A-Za-z0-9_-` symbols.
-// The order of characters is optimized for better gzip and brotli compression.
-// References to the same file (works both for gzip and brotli):
-// `'use`, `andom`, and `rict'`
-// References to the brotli default dictionary:
-// `-26T`, `1983`, `40px`, `75px`, `bush`, `jack`, `mind`, `very`, and `wolf`
-let urlAlphabet =
-  'useandom-26T198340PX75pxJACKVERYMINDBUSHWOLF_GQZbfghjklqvwyzrict'
-
-let customAlphabet = (alphabet, defaultSize = 21) => {
-  return (size = defaultSize) => {
-    let id = ''
-    // A compact alternative for `for (var i = 0; i < step; i++)`.
-    let i = size | 0
-    while (i--) {
-      // `| 0` is more compact and faster than `Math.floor()`.
-      id += alphabet[(Math.random() * alphabet.length) | 0]
-    }
-    return id
-  }
-}
-
-let nanoid = (size = 21) => {
-  let id = ''
-  // A compact alternative for `for (var i = 0; i < step; i++)`.
-  let i = size | 0
-  while (i--) {
-    // `| 0` is more compact and faster than `Math.floor()`.
-    id += urlAlphabet[(Math.random() * 64) | 0]
-  }
-  return id
-}
-
-module.exports = { nanoid, customAlphabet }

data/dashboard/node_modules/nanoid/non-secure/index.d.ts

@@ -1,33 +0,0 @@
-/**
- * Generate URL-friendly unique ID. This method uses the non-secure
- * predictable random generator with bigger collision probability.
- *
- * ```js
- * import { nanoid } from 'nanoid/non-secure'
- * model.id = nanoid() //=> "Uakgb_J5m9g-0JDMbcJqL"
- * ```
- *
- * @param size Size of the ID. The default size is 21.
- * @returns A random string.
- */
-export function nanoid(size?: number): string
-
-/**
- * Generate a unique ID based on a custom alphabet.
- * This method uses the non-secure predictable random generator
- * with bigger collision probability.
- *
- * @param alphabet Alphabet used to generate the ID.
- * @param defaultSize Size of the ID. The default size is 21.
- * @returns A random string generator.
- *
- * ```js
- * import { customAlphabet } from 'nanoid/non-secure'
- * const nanoid = customAlphabet('0123456789абвгдеё', 5)
- * model.id = //=> "8ё56а"
- * ```
- */
-export function customAlphabet(
-  alphabet: string,
-  defaultSize?: number
-): (size?: number) => string

data/dashboard/node_modules/nanoid/non-secure/index.js

@@ -1,21 +0,0 @@
-let urlAlphabet =
-  'useandom-26T198340PX75pxJACKVERYMINDBUSHWOLF_GQZbfghjklqvwyzrict'
-let customAlphabet = (alphabet, defaultSize = 21) => {
-  return (size = defaultSize) => {
-    let id = ''
-    let i = size | 0
-    while (i--) {
-      id += alphabet[(Math.random() * alphabet.length) | 0]
-    }
-    return id
-  }
-}
-let nanoid = (size = 21) => {
-  let id = ''
-  let i = size | 0
-  while (i--) {
-    id += urlAlphabet[(Math.random() * 64) | 0]
-  }
-  return id
-}
-export { nanoid, customAlphabet }

data/dashboard/node_modules/nanoid/non-secure/package.json

@@ -1,6 +0,0 @@
-{
-  "type": "module",
-  "main": "index.cjs",
-  "module": "index.js",
-  "react-native": "index.js"
-}

data/dashboard/node_modules/nanoid/package.json

@@ -1,89 +0,0 @@
-{
-  "name": "nanoid",
-  "version": "3.3.11",
-  "description": "A tiny (116 bytes), secure URL-friendly unique string ID generator",
-  "keywords": [
-    "uuid",
-    "random",
-    "id",
-    "url"
-  ],
-  "engines": {
-    "node": "^10 || ^12 || ^13.7 || ^14 || >=15.0.1"
-  },
-  "funding": [
-    {
-      "type": "github",
-      "url": "https://github.com/sponsors/ai"
-    }
-  ],
-  "author": "Andrey Sitnik <andrey@sitnik.ru>",
-  "license": "MIT",
-  "repository": "ai/nanoid",
-  "browser": {
-    "./index.js": "./index.browser.js",
-    "./async/index.js": "./async/index.browser.js",
-    "./async/index.cjs": "./async/index.browser.cjs",
-    "./index.cjs": "./index.browser.cjs"
-  },
-  "react-native": "index.js",
-  "bin": "./bin/nanoid.cjs",
-  "sideEffects": false,
-  "types": "./index.d.ts",
-  "type": "module",
-  "main": "index.cjs",
-  "module": "index.js",
-  "exports": {
-    ".": {
-      "react-native": "./index.browser.js",
-      "browser": "./index.browser.js",
-      "require": {
-        "types": "./index.d.cts",
-        "default": "./index.cjs"
-      },
-      "import": {
-        "types": "./index.d.ts",
-        "default": "./index.js"
-      },
-      "default": "./index.js"
-    },
-    "./package.json": "./package.json",
-    "./async/package.json": "./async/package.json",
-    "./async": {
-      "browser": "./async/index.browser.js",
-      "require": {
-        "types": "./index.d.cts",
-        "default": "./async/index.cjs"
-      },
-      "import": {
-        "types": "./index.d.ts",
-        "default": "./async/index.js"
-      },
-      "default": "./async/index.js"
-    },
-    "./non-secure/package.json": "./non-secure/package.json",
-    "./non-secure": {
-      "require": {
-        "types": "./index.d.cts",
-        "default": "./non-secure/index.cjs"
-      },
-      "import": {
-        "types": "./index.d.ts",
-        "default": "./non-secure/index.js"
-      },
-      "default": "./non-secure/index.js"
-    },
-    "./url-alphabet/package.json": "./url-alphabet/package.json",
-    "./url-alphabet": {
-      "require": {
-        "types": "./index.d.cts",
-        "default": "./url-alphabet/index.cjs"
-      },
-      "import": {
-        "types": "./index.d.ts",
-        "default": "./url-alphabet/index.js"
-      },
-      "default": "./url-alphabet/index.js"
-    }
-  }
-}

data/dashboard/node_modules/nanoid/url-alphabet/index.cjs

@@ -1,7 +0,0 @@
-// This alphabet uses `A-Za-z0-9_-` symbols.
-// The order of characters is optimized for better gzip and brotli compression.
-// Same as in non-secure/index.js
-let urlAlphabet =
-  'useandom-26T198340PX75pxJACKVERYMINDBUSHWOLF_GQZbfghjklqvwyzrict'
-
-module.exports = { urlAlphabet }

data/dashboard/node_modules/nanoid/url-alphabet/index.js

@@ -1,3 +0,0 @@
-let urlAlphabet =
-  'useandom-26T198340PX75pxJACKVERYMINDBUSHWOLF_GQZbfghjklqvwyzrict'
-export { urlAlphabet }

data/dashboard/node_modules/nanoid/url-alphabet/package.json

@@ -1,6 +0,0 @@
-{
-  "type": "module",
-  "main": "index.cjs",
-  "module": "index.js",
-  "react-native": "index.js"
-}

data/dashboard/node_modules/node-releases/LICENSE

@@ -1,21 +0,0 @@
-The MIT License
-
-Copyright (c) 2017 Sergey Rubanov (https://github.com/chicoxyzzy)
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.

data/dashboard/node_modules/node-releases/README.md

@@ -1,12 +0,0 @@
-# Node.js releases data
-
-All data is located in `data` directory.
-
-`data/processed` contains `envs.json` with node.js releases data preprocessed to be used by [Browserslist](https://github.com/ai/browserslist) and other projects. Each version in this file contains only necessary info: version, release date, LTS flag/name, and security flag.
-
-`data/release-schedule` contains `release-schedule.json` with node.js releases date and end of life date.
-
-## Installation
-```bash
-npm install node-releases
-```