busser 0.1.0

data/.gitignore

@@ -0,0 +1,17 @@
+*.gem
+*.rbc
+.bundle
+.config
+.yardoc
+Gemfile.lock
+InstalledFiles
+_yardoc
+coverage
+doc/
+lib/bundler/man
+pkg
+rdoc
+spec/reports
+test/tmp
+test/version_tmp
+tmp

data/.simplecov

@@ -0,0 +1,10 @@
+SimpleCov.adapters.define 'gem' do
+  command_name 'Specs'
+
+  add_filter '.gem/'
+  add_filter '/spec/'
+  add_filter '/lib/vendor/'
+
+  add_group 'Libraries', '/lib/'
+end
+SimpleCov.start 'gem'

data/.tailor

@@ -0,0 +1,4 @@
+Tailor.config do |config|
+  config.formatters "text"
+  config.file_set 'lib/**/*.rb'
+end

data/.travis.yml

@@ -0,0 +1,19 @@
+language: ruby
+
+rvm:
+- 2.0.0
+- 1.9.3
+- 1.9.2
+- ruby-head
+
+env:
+  - RUBYGEMS_VERSION=2.0.3
+  - RUBYGEMS_VERSION=1.8.25
+
+before_install:
+  - gem update --system $RUBYGEMS_VERSION
+  - gem --version
+
+matrix:
+  allow_failures:
+  - rvm: ruby-head

data/CHANGELOG.md

@@ -0,0 +1,5 @@
+## 0.1.0 / 2013-03-28
+
+* Initial release
+
+[@fnichol]: https://github.com/fnichol

data/Gemfile

@@ -0,0 +1,9 @@
+source 'https://rubygems.org'
+
+gemspec
+
+group :development do
+  gem 'rb-inotify', :require => false
+  gem 'rb-fsevent', :require => false
+  gem 'rb-fchange', :require => false
+end

data/Guardfile

@@ -0,0 +1,18 @@
+guard 'minitest' do
+  watch(%r|^spec/(.*)_spec\.rb|)
+  watch(%r|^lib/(.*)([^/]+)\.rb|)     { |m| "spec/#{m[1]}#{m[2]}_spec.rb" }
+  watch(%r|^spec/spec_helper\.rb|)    { "spec" }
+end
+
+guard 'cucumber' do
+  watch(%r{^features/.+\.feature$})
+  watch(%r{^features/support/.+$}) { 'features' }
+  watch(%r{^features/step_definitions/(.+)_steps\.rb$}) do |m|
+    Dir[File.join("**/#{m[1]}.feature")][0] || 'features'
+  end
+end
+
+guard 'cane' do
+  watch(%r|.*\.rb|)
+  watch('.cane')
+end

data/LICENSE

@@ -0,0 +1,15 @@
+Author:: Fletcher Nichol (<fnichol@nichol.ca>)
+
+Copyright 2013 Fletcher Nichol
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

data/README.md

@@ -0,0 +1,35 @@
+# Busser
+
+[![Build Status](https://travis-ci.org/fnichol/busser.png?branch=master)](https://travis-ci.org/fnichol/busser)
+[![Code Climate](https://codeclimate.com/github/fnichol/busser.png)](https://codeclimate.com/github/fnichol/busser)
+
+Busser is a test setup and execution framework designed to
+work on remote nodes whose system dependencies cannot be relied upon, except
+for an Omnibus installation of Chef. It uses a plugin architecture to add
+support for different testing strategies such minitest, cucumber, bash, etc.
+
+## Installation
+
+Add this line to your application's Gemfile:
+
+    gem 'busser'
+
+And then execute:
+
+    $ bundle
+
+Or install it yourself as:
+
+    $ gem install busser
+
+## Usage
+
+TODO: Write usage instructions here
+
+## Contributing
+
+1. Fork it
+2. Create your feature branch (`git checkout -b my-new-feature`)
+3. Commit your changes (`git commit -am 'Add some feature'`)
+4. Push to the branch (`git push origin my-new-feature`)
+5. Create new Pull Request

data/Rakefile

@@ -0,0 +1,38 @@
+require "bundler/gem_tasks"
+require 'rake/testtask'
+require 'cucumber/rake/task'
+require 'cane/rake_task'
+require 'tailor/rake_task'
+
+Rake::TestTask.new(:unit) do |t|
+  t.libs.push "lib"
+  t.test_files = FileList['spec/**/*_spec.rb']
+  t.verbose = true
+end
+
+Cucumber::Rake::Task.new(:features) do |t|
+  t.cucumber_opts = ['features', '-x', '--format progress']
+end
+
+desc "Run all test suites"
+task :test => [:unit, :features]
+
+desc "Run cane to check quality metrics"
+Cane::RakeTask.new do |cane|
+  cane.canefile = './.cane'
+end
+
+Tailor::RakeTask.new
+
+desc "Display LOC stats"
+task :stats do
+  puts "\n## Production Code Stats"
+  sh "countloc -r lib"
+  puts "\n## Test Code Stats"
+  sh "countloc -r spec features"
+end
+
+desc "Run all quality tasks"
+task :quality => [:cane, :tailor, :stats]
+
+task :default => [:test, :quality]

data/bin/busser

@@ -0,0 +1,8 @@
+#!/usr/bin/env ruby
+# -*- encoding: utf-8 -*-
+
+$:.unshift File.join(File.dirname(__FILE__), %w{.. lib})
+require 'rubygems'
+require 'busser/cli'
+
+Busser::CLI.start

data/busser.gemspec

@@ -0,0 +1,39 @@
+# coding: utf-8
+lib = File.expand_path('../lib', __FILE__)
+$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
+require 'busser/version'
+
+Gem::Specification.new do |spec|
+  spec.name          = "busser"
+  spec.version       = Busser::VERSION
+  spec.authors       = ["Fletcher Nichol"]
+  spec.email         = ["fnichol@nichol.ca"]
+  spec.description   = %q{Kitchen Busser - Runs tests for projects in test-kitchen}
+  spec.summary       = spec.description
+  spec.homepage      = "https://github.com/fnichol/busser"
+  spec.license       = 'Apache 2.0'
+
+  spec.files         = `git ls-files`.split($/)
+  spec.executables   = spec.files.grep(%r{^bin/}) { |f| File.basename(f) }
+  spec.test_files    = spec.files.grep(%r{^(test|spec|features)/})
+  spec.require_paths = ["lib"]
+
+  spec.required_ruby_version = ">= 1.9.1"
+
+  spec.add_dependency 'thor'
+
+  spec.add_development_dependency "bundler", "~> 1.3"
+  spec.add_development_dependency "rake"
+  spec.add_development_dependency 'minitest'
+  spec.add_development_dependency 'guard-minitest'
+  spec.add_development_dependency 'mocha'
+  spec.add_development_dependency 'fakefs'
+  spec.add_development_dependency 'aruba'
+  spec.add_development_dependency 'guard-cucumber'
+
+  spec.add_development_dependency 'cane'
+  spec.add_development_dependency 'guard-cane'
+  spec.add_development_dependency 'tailor'
+  spec.add_development_dependency 'simplecov'
+  spec.add_development_dependency 'countloc'
+end

data/features/plugin_install_command.feature

@@ -0,0 +1,26 @@
+Feature: Plugin install command
+  In order to let user test they way they want to test
+  As a user of Busser
+  I want the ability to install test runner plugins
+
+  Background:
+    Given a sandboxed GEM_HOME directory named "busser-plugin"
+
+  Scenario: Installing a missing plugin
+    When I run `busser plugin install rack`
+    Then the output should contain "Plugin rack installed"
+    And the exit status should be 0
+    And a gem named "rack" is installed
+
+  Scenario: Installing a missing plugin with a version
+    When I run `busser plugin install rack@1.2.8`
+    Then the output should contain "Plugin rack@1.2.8 installed (version 1.2.8)"
+    And the exit status should be 0
+    And a gem named "rack" is installed with version "1.2.8"
+
+  Scenario: Installing a specfic newer version of an existing plugin
+    When I successfully run `busser plugin install rack@1.2.8`
+    And I run `busser plugin install rack@1.3.10`
+    Then the output should contain "Plugin rack@1.3.10 installed (version 1.3.10)"
+    And the exit status should be 0
+    And a gem named "rack" is installed with version "1.3.10"

data/features/setup_command.feature

@@ -0,0 +1,17 @@
+Feature: Setup command
+  In order to make Busser self-reliant with little external initialization
+  As a user of Busser
+  I want a command to set up Busser's environment
+
+  Background:
+    Given a test BUSSER_ROOT directory named "busser-setup"
+    And I delete the BUSSER_ROOT directory
+
+  Scenario: Busser home is set up
+    Given I run `busser setup`
+    Then the BUSSER_ROOT directory should exist
+    And a busser binstub file should contain:
+    """
+    This file was generated by Busser.
+    """
+    And the exit status should be 0

data/features/step_definitions/busser_root_steps.rb

@@ -0,0 +1,65 @@
+require 'tmpdir'
+require 'pathname'
+
+Given(/^a BUSSER_ROOT of "(.*?)"$/) do |busser_root|
+  backup_envvar('BUSSER_ROOT')
+
+  ENV['BUSSER_ROOT'] = busser_root
+end
+
+Given(/^a test BUSSER_ROOT directory named "(.*?)"$/) do |name|
+  backup_envvar('BUSSER_ROOT')
+
+  busser_root = Pathname.new(Dir.mktmpdir(name))
+  (busser_root + "suites").mkpath
+  ENV['BUSSER_ROOT'] = busser_root.to_s
+  @busser_root_dirs << busser_root
+end
+
+Given(/^I delete the BUSSER_ROOT directory$/) do
+  FileUtils.rm_rf(ENV['BUSSER_ROOT'])
+end
+
+Given(/^a suite directory named "(.*?)"$/) do |name|
+  FileUtils.mkdir_p(File.join(ENV['BUSSER_ROOT'], "suites", name))
+end
+
+Given(/^a sandboxed GEM_HOME directory named "(.*?)"$/) do |name|
+  backup_envvar('GEM_HOME')
+  backup_envvar('GEM_PATH')
+
+  gem_home = Pathname.new(Dir.mktmpdir(name))
+  ENV['GEM_HOME'] = gem_home.to_s
+  ENV['GEM_PATH'] = [gem_home.to_s, ENV['GEM_PATH']].join(':')
+  @busser_root_dirs << gem_home
+end
+
+Then(/^the suite directory named "(.*?)" should not exist$/) do |name|
+  directory = File.join(ENV['BUSSER_ROOT'], "suites", name)
+  check_directory_presence([directory], false)
+end
+
+Then(/^a gem named "(.*?)" is installed with version "(.*?)"$/) do |name, version|
+  unbundlerize do
+    run_simple(unescape("gem list #{name} --version #{version} -i"), true, nil)
+  end
+end
+
+Then(/^a gem named "(.*?)" is installed$/) do |name|
+  unbundlerize do
+    run_simple(unescape("gem list #{name} -i"), true, nil)
+  end
+end
+
+Then(/^the BUSSER_ROOT directory should exist$/) do
+  check_directory_presence([ENV['BUSSER_ROOT']], true)
+end
+
+Then(/^a busser binstub file should contain:$/) do |partial_content|
+  file = File.join(ENV['BUSSER_ROOT'], %w{bin busser})
+  check_file_content(file, partial_content, true)
+end
+
+Then(/^pry me$/) do
+  require 'pry' ; binding.pry
+end

data/features/suite_cleanup_command.feature

@@ -0,0 +1,28 @@
+Feature: Suite cleanup command
+  In order to have a fresh suite directory base for each test run
+  As a user of Busser
+  I want a command to clean any suite subdirectories
+
+  Background:
+    Given a test BUSSER_ROOT directory named "busser-suite"
+
+  Scenario: A nonexistent base suite path
+    Given I delete the BUSSER_ROOT directory
+    When I run `busser suite cleanup`
+    Then the output should contain "does not exist"
+    And the exit status should be 0
+
+  Scenario: An empty base suite path
+    When I run `busser suite cleanup`
+    Then the stdout should not contain anything
+    And the exit status should be 0
+
+  Scenario: A base suite path containing suite directories
+    Given a suite directory named "bats"
+    And a suite directory named "minitest"
+    When I run `busser suite cleanup`
+    Then the output should contain "bats"
+    And the output should contain "minitest"
+    And the suite directory named "bats" should not exist
+    And the suite directory named "minitest" should not exist
+    And the exit status should be 0

data/features/suite_path_command.feature

@@ -0,0 +1,15 @@
+Feature: Suite path command
+  In order to determine the directory containing suite tests
+  As a user of Busser
+  I want a command to echo this directory on standard output
+
+  Background:
+    Given a BUSSER_ROOT of "/path/to/busser"
+
+  Scenario: Get base suite path
+    When I successfully run `busser suite path`
+    Then the output should contain exactly "/path/to/busser/suites\n"
+
+  Scenario: Get suite path for a plugin
+    When I successfully run `busser suite path footester`
+    Then the output should contain exactly "/path/to/busser/suites/footester\n"

data/features/support/env.rb

@@ -0,0 +1,40 @@
+require 'simplecov'
+require 'aruba/cucumber'
+
+SimpleCov.command_name "features"
+
+Before do
+  @aruba_timeout_seconds = 10
+  @busser_root_dirs = []
+end
+
+After do |s|
+  # Tell Cucumber to quit after this scenario is done - if it failed.
+  # This is useful to inspect the 'tmp/aruba' directory before any other
+  # steps are executed and clear it out.
+  Cucumber.wants_to_quit = true if s.failed?
+
+  # Restore environment variables to their original settings, if they have
+  # been saved off
+  ENV.keys.select { |key| key =~ /^_CUKE_/ }.each do |backup_key|
+    ENV[backup_key.sub(/^_CUKE_/, '')] = ENV.delete(backup_key)
+  end
+
+  @busser_root_dirs.each { |dir| FileUtils.rm_rf(dir) }
+end
+
+def backup_envvar(key)
+  ENV["_CUKE_#{key}"] = ENV[key]
+end
+
+def restore_envvar(key)
+  ENV[key] = ENV.delete("_CUKE_#{key}")
+end
+
+def unbundlerize
+  keys = %w[BUNDLER_EDITOR BUNDLE_BIN_PATH BUNDLE_GEMFILE RUBYOPT]
+
+  keys.each { |key| backup_envvar(key) ; ENV.delete(key) }
+  yield
+  keys.each { |key| restore_envvar(key) }
+end

data/lib/busser.rb

@@ -0,0 +1,22 @@
+# -*- encoding: utf-8 -*-
+#
+# Author:: Fletcher Nichol (<fnichol@nichol.ca>)
+#
+# Copyright (C) 2013, Fletcher Nichol
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+require "busser/version"
+
+module Busser
+end