burn 0.1.0

data/lib/burn/tools/win/cc65/asminc/atari.inc

@@ -0,0 +1,1101 @@
+;-------------------------------------------------------------------------
+; Atari System Equates
+; by Freddy Offenga & Christian Groessler
+;
+; References:
+; - Atari 400/800 OS rev.B source code, Atari 1979
+; - Atari OS manual - XL addendum
+; - Atari XL/XE rev.2 source code, Atari 1984
+; - Mapping the Atari - revised edition, Ian Chadwick 1985
+;
+; ##old##	old OS rev.B label - moved or deleted
+; ##1200xl##	new label introduced in 1200XL OS (rev.10/11)
+; ##rev2##	new label introduced in XL/XE OS rev.2
+;-------------------------------------------------------------------------
+
+;-------------------------------------------------------------------------
+; Configuration Equates
+;-------------------------------------------------------------------------
+
+MAXDEV	= 33		;offset to last possible entry of HATABS
+IOCBSZ	= 16		;length of IOCB
+
+SEIOCB	= 0*IOCBSZ	;##rev2## screen editor IOCB index
+MAXIOC	= 8*IOCBSZ	;first invalid IOCB index
+
+DSCTSZ	= 128		;##rev2## disk sector size
+
+LEDGE	= 2		;left edge
+REDGE	= 39		;right edge
+
+INIML	= $0700		;##rev2## initial MEMLO
+
+ICSORG	= $CC00		;##rev2## international character set origin
+DCSORG	= $E000		;##rev2## domestic character set origin
+
+; IOCB Command Code Equates
+
+OPEN	= $03		;open
+GETREC	= $05		;get record
+GETCHR	= $07		;get character(s)
+PUTREC	= $09		;put record
+PUTCHR	= $0B		;put character(s)
+CLOSE	= $0C		;close
+STATIS	= $0D		;status
+SPECIL	= $0E		;special
+
+; Special Entry Command Equates
+
+; Screen Commands
+
+DRAWLN	= $11		;draw line
+FILLIN	= $12		;draw line with right fill
+
+; ICAX1 Auxiliary Byte 1 Equates
+
+APPEND	= $01		;open write append (D:)
+DIRECT	= $02		;open for directory access (D:)
+OPNIN	= $04		;open for input (all devices)
+OPNOT	= $08		;open for output (all devices)
+MXDMOD	= $10		;open for mixed mode (E:, S:)
+INSCLR	= $20		;open for input without clearing screen
+
+; Device Code Equates
+
+CASSET	= 'C'		;cassette
+DISK	= 'D'		;disk
+SCREDT	= 'E'		;screen editor
+KBD	= 'K'		;keyboard
+PRINTR	= 'P'		;printer
+DISPLY	= 'S'		;screen display
+
+; SIO Command Code Equates
+
+SIO_FORMAT   = $21	;format disk (default density)
+SIO_FORMATS  = $22	;1050: format medium density
+SIO_CONFIG   = $44	;configure drive
+SIO_CONFIGSF = $4B	;slow/fast configure drive??
+SIO_WRITE    = $50	;write sector
+SIO_READ     = $52	;read sector
+SIO_STAT     = $53	;get status information
+SIO_VERIFY   = $56	;verify sector 
+SIO_WRITEV   = $57	;write sector with verify
+
+; Character and Key Code Equates
+
+CLS	= $7D		;##rev2## clear screen
+EOL	= $9B		;end of line (RETURN)
+
+HELP	= $11		;##1200xl## key code for HELP
+CNTLF1	= $83		;##1200xl## key code for CTRL-F1
+CNTLF2	= $84		;##1200xl## key code for CTRL-F2
+CNTLF3	= $93		;##1200xl## key code for CTRL-F3
+CNTLF4	= $94		;##1200xl## key code for CTRL-F4
+CNTL1	= $9F		;##1200xl## key code for CTRL-1
+
+; Status Code Equates
+
+SUCCES	= 1		;($01) succesful operation
+
+BRKABT	= 128		;($80) BREAK key abort
+PRVOPN	= 129		;($81) IOCB already open error
+NONDEV	= 130		;($82) nonexistent device error
+WRONLY	= 131		;($83) IOCB opened for write only error
+NVALID	= 132		;($84) invalid command error
+NOTOPN	= 133		;($85) device/file not open error
+BADIOC	= 134		;($86) invalid IOCB index error
+RDONLY	= 135		;($87) IOCB opened for read only error
+EOFERR	= 136		;($88) end of file error
+TRNRCD	= 137		;($89) truncated record error
+TIMOUT	= 138		;($8A) peripheral device timeout error
+DNACK	= 139		;($8B) device does not acknowledge command
+FRMERR	= 140		;($8C) serial bus framing error
+CRSROR	= 141		;($8D) cursor overrange error
+OVRRUN	= 142		;($8E) serial bus data overrun error
+CHKERR	= 143		;($8F) serial bus checksum error
+DERROR	= 144		;($90) device done (operation incomplete)
+BADMOD	= 145		;($91) bad screen mode number error
+FNCNOT	= 146		;($92) function not implemented in handler
+SCRMEM	= 147		;($93) insufficient memory for screen mode
+
+DSKFMT	= 148		;($94) SpartaDOS: unrecognized disk format
+INCVER	= 149		;($95) SpartaDOS: disk was made with incompat. version
+DIRNFD	= 150		;($96) SpartaDOS: directory not found
+FEXIST	= 151		;($97) SpartaDOS: file exists
+NOTBIN	= 152		;($98) SpartaDOS: file not binary
+LSYMND	= 154		;($9A) SDX: loader symbol not defined
+BADPRM	= 156		;($9C) SDX: bad parameter
+OUTOFM	= 158		;($9E) SDX: out of memory
+INVDEV	= 160		;($A0) invalid device number
+TMOF	= 161		;($A1) too many open files
+DSKFLL	= 162		;($A2) disk full
+FATLIO	= 163		;($A3) fatal I/O error
+FNMSMT	= 164		;($A4) internal file number mismatch
+INVFNM	= 165		;($A5) invalid file name
+PDLERR	= 166		;($A6) point data length error
+EPERM	= 167		;($A7) permission denied
+DINVCM	= 168		;($A8) command invalid for disk
+DIRFLL	= 169		;($A9) directory full
+FNTFND	= 170		;($AA) file not found
+PNTINV	= 171		;($AB) point invalid
+BADDSK	= 173		;($AD) bad disk
+INCFMT	= 176		;($B0) DOS 3: incompatible file system
+
+; DCB Device Bus Equates
+
+DISKID	= $31		;##rev2## disk bus ID
+PDEVN	= $40		;##rev2## printer bus ID
+CASET	= $60		;##rev2## cassette bus ID
+
+; Bus Command Equates
+
+FOMAT	= '!'		;##rev2## format command
+PUTSEC	= 'P'		;##rev2## put sector command
+READ	= 'R'		;##rev2## read command
+STATC	= 'S'		;##rev2## status command
+WRITE	= 'W'		;##rev2## write command
+
+; Command Auxiliary Byte Equates
+
+DOUBLE	= 'D'		;##rev2## print 20 characters double width
+NORMAL	= 'N'		;##rev2## print 40 characters normally
+PLOT	= 'P'		;##rev2## plot
+SIDWAY	= 'S'		;##rev2## print 16 characters sideways
+
+; Bus Response Equates
+
+ACK	= 'A'		;##rev2## device acknowledged
+COMPLT	= 'C'		;##rev2## device succesfully completed operation
+ERROR	= 'E'		;##rev2## device incurred error
+NACK	= 'N'		;##rev2## device did not understand
+
+; Floating Point Miscellaneous Equates
+
+FPREC	= 6		;precision
+
+FMPREC	= FPREC-1	;##rev2## length of mantissa
+
+; Cassette Record Type Equates
+
+HDR	= $FB		;##rev2## header
+DTA	= $FC		;##rev2## data record
+DT1	= $FA		;##rev2## last data record
+EOT	= $FE		;##rev2## end of tape (file)
+
+TONE1	= 2		;##rev2## record
+TONE2	= 1		;##rev2## playback
+
+; Cassette Timing Equates
+
+WLEADN	= 1152		;##rev2## NTSC 19.2 second WRITE file leader
+RLEADN	= 576		;##rev2## NTSC 9.6 second READ file leader
+WIRGLN	= 180		;##rev2## NTSC 3.0 second WRITE IRG
+RIRGLN	= 120		;##rev2## NTSC 2.0 second READ IRG
+WSIRGN	= 15		;##rev2## NTSC 0.25 second WRITE short IRG
+RSIRGN	= 10		;##rev2## NTSC 0.16 second READ short IRG
+BEEPNN	= 30		;##rev2## NTSC 0.5 second beep duration
+BEEPFN	= 10		;##rev2## NTSC 0.16 seconrd beep duration
+
+WLEADP	= 960		;##rev2## PAL 19.2 second WRITE file leader
+RLEADP	= 480		;##rev2## PAL 9.6 second READ file leader
+WIRGLP	= 150		;##rev2## PAL 3.0 second WRITE IRG
+RIRGLP	= 100		;##rev2## PAL 2.0 second READ IRG
+WSIRGP	= 13		;##rev2## PAL 0.25 second WRITE short IRG
+RSIRGP	= 8		;##rev2## PAL 0.16 second READ short IRG
+BEEPNP	= 25		;##rev2## PAL 0.5 second beep duration
+BEEPFP	= 8		;##rev2## PAL 0.16 seconrd beep duration
+
+WIRGHI	= 0		;##rev2## high WRITE IRG
+RIRGHI	= 0		;##rev2## high READ IRG
+
+; Power-up Validation Byte Value Equates
+
+PUPVL1	= $5C		;##rev2## power-up validation value 1
+PUPVL2	= $93		;##rev2## power-up validation value 2
+PUPVL3	= $25		;##rev2## power-up validation value 3
+
+; Relocating Loader Miscellaneous Equates
+
+DATAER	= 156		;##rev2## end of record appears before END
+MEMERR	= 157		;##rev2## memory insufficient for load error
+
+; Miscellaneous Equates
+
+IOCFRE	= $FF		;IOCB free indication
+
+B19200	= $0028		;##rev2## 19200 baud POKEY counter value
+B00600	= $05CC		;##rev2## 600 baud POKEY counter value
+
+HITONE	= $05		;##rev2## FSK high freq. POKEY counter value
+LOTONE	= $07		;##rev2## FSK low freq. POKEY counter value
+
+NCOMLO	= $34		;##rev2## PIA lower NOT COMMAND line command
+NCOMHI	= $3C		;##rev2## PIA raise NOT COMMAND line command
+
+MOTRGO	= $34		;##rev2## PIA cassette motor ON command
+MOTRST	= $3C		;##rev2## PIA cassette motor OFF command
+
+NODAT	= $00		;##rev2## SIO immediate operation
+GETDAT	= $40		;##rev2## SIO read data frame
+PUTDAT	= $80		;##rev2## SIO write data frame
+
+CRETRI	= 13		;##rev2## number of command frame retries
+DRETRI	= 1		;##rev2## number of device retries
+CTIM	= 2		;##rev2## command frame ACK timeout
+
+NBUFSZ	= 40		;##rev2## print normal buffer size
+DBUFSZ	= 20		;##rev2## print double buffer size
+SBUFSZ	= 29		;##rev2## print sideways buffer size
+
+;-------------------------------------------------------------------------
+; Page Zero Address Equates
+;-------------------------------------------------------------------------
+
+LINZBS	= $00		;LINBUG RAM (WILL BE REPLACED BY MONITOR RAM)
+LNFLG	= $00		;##1200xl## 1-byte LNBUG flag (0 = not LNBUG)
+NGFLAG	= $01		;##1200xl## 1-byte memory status (0 = failure)
+
+; Not Cleared
+
+CASINI	= $02		;CASSETTE INIT LOCATION
+RAMLO	= $04		;RAM POINTER FOR MEMORY TEST
+TRAMSZ	= $06		;TEMPORARY REGISTER FOR RAM SIZE
+;TSTDAT	= $07		;##old## RAM TEST DATA REGISTER
+CMCMD	= $07		;##rev2## 1-byte command communications
+
+; Cleared upon Coldstart only
+
+WARMST	= $08		;WARM START FLAG
+BOOTQ	= $09		;SUCCESSFUL BOOT FLAG
+DOSVEC	= $0A		;DISK SOFTWARE START VECTOR
+DOSINI	= $0C		;DISK SOFTWARE INIT ADDRESS
+APPMHI	= $0E		;APPLICATIONS MEMORY HI LIMIT
+
+; Cleared upon Coldstart or Warmstart
+
+INTZBS	= $10		;INTERRUPT HANDLER
+
+POKMSK	= $10		;SYSTEM MASK FOR POKEY IRG ENABLE
+BRKKEY	= $11		;BREAK KEY FLAG
+RTCLOK	= $12		;REAL TIME CLOCK (IN 16 MSEC UNITS>
+BUFADR	= $15		;INDIRECT BUFFER ADDRESS REGISTER
+ICCOMT	= $17		;COMMAND FOR VECTOR
+DSKFMS	= $18		;DISK FILE MANAGER POINTER
+DSKUTL	= $1A		;DISK UTILITIES POINTER
+ABUFPT	= $1C		;##1200xl## 4-byte ACMI buffer pointer area
+
+;PTIMOT	= $1C		;##old## PRINTER TIME OUT REGISTER
+;PBPNT	= $1D		;##old## PRINT BUFFER POINTER
+;PBUFSZ	= $1E		;##old## PRINT BUFFER SIZE
+;PTEMP	= $1F		;##old## TEMPORARY REGISTER
+
+ZIOCB	= $20		;ZERO PAGE I/O CONTROL BLOCK
+IOCBAS	= $20		;16-byte page zero IOCB
+ICHIDZ	= $20		;HANDLER INDEX NUMBER (FF = IOCB FREE)
+ICDNOZ	= $21		;DEVICE NUMBER (DRIVE NUMBER)
+ICCOMZ	= $22		;COMMAND CODE
+ICSTAZ	= $23		;STATUS OF LAST IOCB ACTION
+ICBALZ	= $24		;BUFFER ADDRESS LOW BYTE
+ICBAHZ	= $25		;1-byte high buffer address
+ICPTLZ	= $26		;PUT BYTE ROUTINE ADDRESS -1
+ICPTHZ	= $27		;1-byte high PUT-BYTE routine address
+ICBLLZ	= $28		;BUFFER LENGTH LOW BYTE
+ICBLHZ	= $29		;1-byte high buffer length
+ICAX1Z	= $2A		;AUXILIARY INFORMATION FIRST BYTE
+ICAX2Z	= $2B		;1-byte second auxiliary information
+ICSPRZ	= $2C		;4-byte spares
+
+ENTVEC	= $2C		;##rev2## 2-byte (not used)
+ICIDNO	= $2E		;IOCB NUMBER X 16
+CIOCHR	= $2F		;CHARACTER BYTE FOR CURRENT OPERATION
+
+STATUS	= $30		;INTERNAL STATUS STORAGE
+CHKSUM	= $31		;CHECKSUM (SINGLE BYTE SUM WITH CARRY)
+BUFRLO	= $32		;POINTER TO DATA BUFFER (LO BYTE)
+BUFRHI	= $33		;POINTER TO DATA BUFFER (HI BYTE)
+BFENLO	= $34		;NEXT BYTE PAST END OF THE DATA BUFFER LO
+BFENHI	= $35		;NEXT BYTE PAST END OF THE DATA BUFFER HI
+;CRETRY	= $36		;##old## NUMBER OF COMMAND FRAME RETRIES
+;DRETRY	= $37		;##old## NUMBER OF DEVICE RETRIES
+LTEMP	= $36		;##1200xl## 2-byte loader temporary
+BUFRFL	= $38		;DATA BUFFER FULL FLAG
+RECVDN	= $39		;RECEIVE DONE FLAG
+XMTDON	= $3A		;TRANSMISSION DONE FLAG
+CHKSNT	= $3B		;CHECKSUM SENT FLAG
+NOCKSM	= $3C		;NO CHECKSUM FOLLOWS DATA FLAG
+BPTR	= $3D		;1-byte cassette buffer pointer
+FTYPE	= $3E		;1-byte cassette IRG type
+FEOF	= $3F		;1-byte cassette EOF flag (0 = quiet)
+FREQ	= $40		;1-byte cassette beep counter
+SOUNDR	= $41		;NOISY I/0 FLAG. (ZERO IS QUIET)
+
+CRITIC	= $42		;DEFINES CRITICAL SECTION (CRITICAL IF NON-Z)
+
+FMSZPG	= $43		;DISK FILE MANAGER SYSTEM ZERO PAGE
+
+;CKEY	= $4A		;##old## FLAG SET WHEN GAME START PRESSED
+ZCHAIN	= $4A		;##1200xl## 2-byte handler linkage chain pointer
+;CASSBT	= $4B		;##old## CASSETTE BOOT FLAG
+DSTAT	= $4C		;DISPLAY STATUS
+ATRACT	= $4D		;ATRACT FLAG
+DRKMSK	= $4E		;DARK ATRACT MASK
+COLRSH	= $4F		;ATRACT COLOR SHIFTER (EOR'ED WITH PLAYFIELD
+
+
+TMPCHR	= $50		;1-byte temporary character
+HOLD1	= $51		;1-byte temporary
+LMARGN	= $52		;left margin (normally 2, cc65 C startup code sets it to 0)
+RMARGN	= $53		;right margin (normally 39 if no XEP80 is used)
+ROWCRS	= $54		;1-byte cursor row
+COLCRS	= $55		;2-byte cursor column
+DINDEX	= $57		;1-byte display mode
+SAVMSC	= $58		;2-byte saved memory scan counter
+OLDROW	= $5A		;1-byte prior row
+OLDCOL	= $5B		;2-byte prior column
+OLDCHR	= $5D		;DATA UNDER CURSOR
+OLDADR	= $5E		;2-byte saved cursor memory address
+FKDEF	= $60		;##1200xl## 2-byte function key definition table
+;NEWROW	= $60		;##old## POINT DRAW GOES TO
+;NEWCOL	= $61		;##old##
+PALNTS	= $62		;##1200xl## 1-byte PAL/NTSC indicator (0 = NTSC)
+LOGCOL	= $63		;POINTS AT COLUMN IN LOGICAL LINE
+ADRESS	= $64		;2-byte temporary address
+
+MLTTMP	= $66		;1-byte temporary
+OPNTMP	= $66		;FIRST BYTE IS USED IN OPEN AS TEMP
+TOADR	= $66		;##rev2## 2-byte destination address
+
+SAVADR	= $68		;2-byte saved address
+FRMADR	= $68		;##rev2## 2-byte source address
+
+RAMTOP	= $6A		;RAM SIZE DEFINED BY POWER ON LOGIC
+BUFCNT	= $6B		;BUFFER COUNT
+BUFSTR	= $6C		;EDITOR GETCH POINTER
+BITMSK	= $6E		;BIT MASK
+SHFAMT	= $6F		;1-byte shift amount for pixel justifucation
+ROWAC	= $70		;2-byte draw working row
+COLAC	= $72		;2-byte draw working column
+ENDPT	= $74		;2-byte end point
+DELTAR	= $76		;1-byte row difference
+DELTAC	= $77		;2-byte column difference
+KEYDEF	= $79		;##1200xl## 2-byte key definition table address
+;ROWINC	= $79		;##old##
+;COLINC	= $7A		;##old##
+SWPFLG	= $7B		;NON-0 1F TXT AND REGULAR RAM IS SWAPPED
+HOLDCH	= $7C		;CH IS MOVED HERE IN KGETCH BEFORE CNTL & SH
+INSDAT	= $7D		;1-byte temporary
+COUNTR	= $7E		;2-byte draw iteration count
+
+; Floating Point Package Page Zero Address Equates
+
+FR0	= $D4		;6-byte register 0
+FR0M	= $D5		;##rev2## 5-byte register 0 mantissa
+QTEMP	= $D9		;##rev2## 1-byte temporary
+
+FRE	= $DA		;6-byte (internal) register E
+
+FR1	= $E0		;FP REG1
+FR1M	= $E1		;##rev2## 5-byte register 1 mantissa
+
+FR2	= $E6		;6-byte (internal) register 2
+
+FRX	= $EC		;1-byte temporary
+
+EEXP	= $ED		;VALUE OF E
+
+FRSIGN	= $EE		;##rev2## 1-byte floating point sign
+NSIGN	= $EE		;SIGN OF #
+
+PLYCNT	= $EF		;##rev2## 1-byte polynomial degree
+ESIGN	= $EF		;SIGN OF EXPONENT
+
+SGNFLG	= $F0		;##rev2## 1-byte sign flag
+FCHRFLG	= $F0		;1ST CHAR FLAG
+
+XFMFLG	= $F1		;##rev2## 1-byte transform flag
+DIGRT	= $F1		;# OF DIGITS RIGHT OF DECIMAL
+
+CIX	= $F2		;CURRENT INPUT INDEX
+INBUFF	= $F3		;POINTS TO USER'S LINE INPUT BUFFER
+
+ZTEMP1	= $F5		;2-byte temporary
+ZTEMP4	= $F7		;2-byte temporary
+ZTEMP3	= $F9		;2-byte temporary
+
+;DEGFLG	= $FB		;##old## same as RADFLG
+;RADFLG	= $FB		;##old## 0=RADIANS, 6=DEGREES
+
+FLPTR	= $FC		;2-byte floating point number pointer
+FPTR2	= $FE		;2-byte floating point number pointer
+
+;-------------------------------------------------------------------------
+; Page Two Address Equates
+;-------------------------------------------------------------------------
+
+INTABS	= $0200		;INTERRUPT RAM
+
+VDSLST	= $0200		;DISPLAY LIST NMI VECTOR
+VPRCED	= $0202		;PROCEED LINE IRQ VECTOR
+VINTER	= $0204		;INTERRUPT LINE IRQ VECTOR
+VBREAK	= $0206		;SOFTWARE BREAK (00) INSTRUCTION IRQ VECTOR
+VKEYBD	= $0208		;POKEY KEYBOARD IRQ VECTOR
+VSERIN	= $020A		;POKEY SERIAL INPUT READY IRQ
+VSEROR	= $020C		;POKEY SERIAL OUTPUT READY IRQ
+VSEROC	= $020E		;POKEY SERIAL OUTPUT COMPLETE IRQ
+VTIMR1	= $0210		;POKEY TIMER 1 IRG
+VTIMR2	= $0212		;POKEY TIMER 2 IRG
+VTIMR4	= $0214		;POKEY TIMER 4 IRG
+VIMIRQ	= $0216		;IMMEDIATE IRG VECTOR
+CDTMV1	= $0218		;COUNT DOWN TIMER 1
+CDTMV2	= $021A		;COUNT DOWN TIMER 2
+CDTMV3	= $021C		;COUNT DOWN TIMER 3
+CDTMV4	= $021E		;COUNT DOWN TIMER 4
+CDTMV5	= $0220		;COUNT DOWN TIMER 5
+VVBLKI	= $0222		;IMMEDIATE VERTICAL BLANK NMI VECTOR
+VVBLKD	= $0224		;DEFERRED VERTICAL BLANK NMI VECTOR
+CDTMA1	= $0226		;COUNT DOWN TIMER 1 JSR ADDRESS
+CDTMA2	= $0228		;COUNT DOWN TIMER 2 JSR ADDRESS
+CDTMF3	= $022A		;COUNT DOWN TIMER 3 FLAG
+SRTIMR	= $022B		;SOFTWARE REPEAT TIMER
+CDTMF4	= $022C		;COUNT DOWN TIMER 4 FLAG
+INTEMP	= $022D		;IAN'S TEMP
+CDTMF5	= $022E		;COUNT DOWN TIMER FLAG 5
+SDMCTL	= $022F		;SAVE DMACTL REGISTER
+SDLSTL	= $0230		;SAVE DISPLAY LIST LOW BYTE
+SDLSTH	= $0231		;SAVE DISPLAY LIST HI BYTE
+SSKCTL	= $0232		;SKCTL REGISTER RAM
+LCOUNT	= $0233		;##1200xl## 1-byte relocating loader record
+LPENH	= $0234		;LIGHT PEN HORIZONTAL VALUE
+LPENV	= $0235		;LIGHT PEN VERTICAL VALUE
+BRKKY	= $0236		;BREAK KEY VECTOR
+;RELADR	= $0238		;##1200xl## 2-byte relocatable loader address
+VPIRQ	= $0238		;##rev2## 2-byte parallel device IRQ vector
+CDEVIC	= $023A		;COMMAND FRAME BUFFER - DEVICE
+CCOMND	= $023B		;COMMAND
+CAUX1	= $023C		;COMMAND AUX BYTE 1
+CAUX2	= $023D		;COMMAND AUX BYTE 2
+
+TEMP	= $023E		;TEMPORARY RAM CELL
+
+ERRFLG	= $023F		;ERROR FLAG - ANY DEVICE ERROR EXCEPT TIME OUT
+
+DFLAGS	= $0240		;DISK FLAGS FROM SECTOR ONE
+DBSECT	= $0241		;NUMBER OF DISK BOOT SECTORS
+BOOTAD	= $0242		;ADDRESS WHERE DISK BOOT LOADER WILL BE PUT
+COLDST	= $0244		;COLDSTART FLAG (1=IN MIDDLE OF COLDSTART>
+RECLEN	= $0245		;##1200xl## 1-byte relocating loader record length
+DSKTIM	= $0246		;DISK TIME OUT REGISTER
+;LINBUF	= $0247		;##old## CHAR LINE BUFFER
+PDVMSK	= $0247		;##rev2## 1-byte parallel device selection mask
+SHPDVS	= $0248		;##rev2## 1-byte PDVS (parallel device select)
+PDIMSK	= $0249		;##rev2## 1-byte parallel device IRQ selection
+RELADR	= $024A		;##rev2## 2-byte relocating loader relative adr.
+PPTMPA	= $024C		;##rev2## 1-byte parallel device handler temporary
+PPTMPX	= $024D		;##rev2## 1-byte parallel device handler temporary
+
+CHSALT	= $026B		;##1200xl## 1-byte character set alternate
+VSFLAG	= $026C		;##1200xl## 1-byte fine vertical scroll count
+KEYDIS	= $026D		;##1200xl## 1-byte keyboard disable
+FINE	= $026E		;##1200xl## 1-byte fine scrolling mode
+GPRIOR	= $026F		;GLOBAL PRIORITY CELL
+
+PADDL0	= $0270		;1-byte potentiometer 0
+PADDL1	= $0271		;1-byte potentiometer 1
+PADDL2	= $0272		;1-byte potentiometer 2
+PADDL3	= $0273		;1-byte potentiometer 3
+PADDL4	= $0274		;1-byte potentiometer 4
+PADDL5	= $0275		;1-byte potentiometer 5
+PADDL6	= $0276		;1-byte potentiometer 6
+PADDL7	= $0277		;1-byte potentiometer 7
+
+STICK0	= $0278		;1-byte joystick 0
+STICK1	= $0279		;1-byte joystick 1
+STICK2	= $027A		;1-byte joystick 2
+STICK3	= $027B		;1-byte joystick 3
+
+PTRIG0	= $027C		;1-byte paddle trigger 0
+PTRIG1	= $027D		;1-byte paddle trigger 1
+PTRIG2	= $027E		;1-byte paddle trigger 2
+PTRIG3	= $027F		;1-byte paddle trigger 3
+PTRIG4	= $0280		;1-byte paddle trigger 4
+PTRIG5	= $0281		;1-byte paddle trigger 5
+PTRIG6	= $0281		;1-byte paddle trigger 6
+PTRIG7	= $0283		;1-byte paddle trigger 7
+
+STRIG0	= $0284		;1-byte joystick trigger 0
+STRIG1	= $0285		;1-byte joystick trigger 1
+STRIG2	= $0286		;1-byte joystick trigger 2
+STRIG3	= $0287		;1-byte joystick trigger 3
+
+;CSTAT	= $0288		;##old## cassette status register
+HIBYTE	= $0288		;##1200xl## 1-byte relocating loader high byte
+WMODE	= $0289		;1-byte cassette WRITE mode
+BLIM	= $028A		;1-byte cassette buffer limit
+IMASK	= $028B		;##rev2## (not used)
+JVECK	= $028C		;2-byte jump vector or temporary
+NEWADR	= $028E		;##1200xl## 2-byte relocating address
+TXTROW	= $0290		;TEXT ROWCRS
+TXTCOL	= $0291		;TEXT COLCRS
+TINDEX	= $0293		;TEXT INDEX
+TXTMSC	= $0294		;FOOLS CONVRT INTO NEW MSC
+TXTOLD	= $0296		;OLDROW & OLDCOL FOR TEXT (AND THEN SOME)
+;TMPX1	= $029C		;##old## 1-byte temporary register
+CRETRY	= $029C		;##1200xl## 1-byte number of command frame retries
+HOLD3	= $029D		;1-byte temporary
+SUBTMP	= $029E		;1-byte temporary
+HOLD2	= $029F		;1-byte (not used)
+DMASK	= $02A0		;1-byte display (pixel location) mask
+TMPLBT	= $02A1		;1-byte (not used)
+ESCFLG	= $02A2		;ESCAPE FLAG
+TABMAP	= $02A3		;15-byte (120 bit) tab stop bit map
+LOGMAP	= $02B2		;LOGICAL LINE START BIT MAP
+INVFLG	= $02B6		;INVERSE VIDEO FLAG (TOGGLED BY ATARI KEY)
+FILFLG	= $02B7		;RIGHT FILL FLAG FOR DRAW
+TMPROW	= $02B8		;1-byte temporary row
+TMPCOL	= $02B9		;2-byte temporary column
+SCRFLG	= $02BB		;SET IF SCROLL OCCURS
+HOLD4	= $02BC		;TEMP CELL USED IN DRAW ONLY
+;HOLD5	= $02BD		;##old## DITTO
+DRETRY	= $02BD		;##1200xl## 1-byte number of device retries
+SHFLOK	= $02BE		;1-byte shift/control lock flags
+BOTSCR	= $02BF		;BOTTOM OF SCREEN   24 NORM 4 SPLIT
+
+PCOLR0	= $02C0		;1-byte player-missile 0 color/luminance
+PCOLR1	= $02C1		;1-byte player-missile 1 color/luminance
+PCOLR2	= $02C2		;1-byte player-missile 2 color/luminance
+PCOLR3	= $02C3		;1-byte player-missile 3 color/luminance
+
+COLOR0	= $02C4		;1-byte playfield 0 color/luminance
+COLOR1	= $02C5		;1-byte playfield 1 color/luminance
+COLOR2	= $02C6		;1-byte playfield 2 color/luminance
+COLOR3	= $02C7		;1-byte playfield 3 color/luminance
+
+COLOR4	= $02C8		;1-byte background color/luminance
+
+PARMBL	= $02C9		;##rev2## 6-byte relocating loader parameter
+RUNADR	= $02C9		;##1200xl## 2-byte run address
+HIUSED	= $02CB		;##1200xl## 2-byte highest non-zero page address
+ZHIUSE	= $02CD		;##1200xl## 2-byte highest zero page address
+
+OLDPAR	= $02CF		;##rev2## 6-byte relocating loader parameter
+GBYTEA	= $02CF		;##1200xl## 2-byte GET-BYTE routine address
+LOADAD	= $02D1		;##1200xl## 2-byte non-zero page load address
+ZLOADA	= $02D3		;##1200xl## 2-byte zero page load address
+
+DSCTLN	= $02D5		;##1200xl## 2-byte disk sector length
+ACMISR	= $02D7		;##1200xl## 2-byte ACMI interrupt service routine
+KRPDEL	= $02D9		;##1200xl## 1-byte auto-repeat delay
+KEYREP	= $02DA		;##1200xl## 1-byte auto-repeat rate
+NOCLIK	= $02DB		;##1200xl## 1-byte key click disable
+HELPFG	= $02DC		;##1200xl## 1-byte HELP key flag (0 = no HELP)
+DMASAV	= $02DD		;##1200xl## 1-byte SDMCTL save/restore
+PBPNT	= $02DE		;##1200xl## 1-byte printer buffer pointer
+PBUFSZ	= $02DF		;##1200xl## 1-byte printer buffer size
+
+GLBABS	= $02E0		;4-byte global variables for non-DOS users
+RUNAD	= $02E0		;##map## 2-byte binary file run address
+INITAD	= $02E2		;##map## 2-byte binary file initialization address
+
+RAMSIZ	= $02E4		;RAM SIZE (HI BYTE ONLY)
+MEMTOP	= $02E5		;TOP OF AVAILABLE USER MEMORY
+MEMLO	= $02E7		;BOTTOM OF AVAILABLE USER MEMORY
+HNDLOD	= $02E9		;##1200xl## 1-byte user load flag
+DVSTAT	= $02EA		;STATUS BUFFER
+CBAUDL	= $02EE		;1-byte low cassette baud rate
+CBAUDH	= $02EF		;1-byte high cassette baud rate
+CRSINH	= $02F0		;CURSOR INHIBIT (00 = CURSOR ON)
+KEYDEL	= $02F1		;KEY DELAY
+CH1	= $02F2		;1-byte prior keyboard character
+CHACT	= $02F3		;CHACTL REGISTER RAM
+CHBAS	= $02F4		;CHBAS REGISTER RAM
+
+NEWROW	= $02F5		;##1200xl## 1-byte draw destination row
+NEWCOL	= $02F6		;##1200xl## 2-byte draw destination column
+ROWINC	= $02F8		;##1200xl## 1-byte draw row increment
+COLINC	= $02F9		;##1200xl## 1-byte draw column increment
+
+CHAR	= $02FA		;1-byte internal character
+ATACHR	= $02FB		;ATASCII CHARACTER
+CH	= $02FC		;GLOBAL VARIABLE FOR KEYBOARD
+FILDAT	= $02FD		;RIGHT FILL DATA <DRAW>
+DSPFLG	= $02FE		;DISPLAY FLAG   DISPLAY CNTLS IF NON-ZERO
+SSFLAG	= $02FF		;START/STOP FLAG FOR PAGING (CNTL 1). CLEARE
+
+;-------------------------------------------------------------------------
+; Page Three Address Equates
+;-------------------------------------------------------------------------
+
+DCB	= $0300		;DEVICE CONTROL BLOCK
+DDEVIC	= $0300		;PERIPHERAL UNIT 1 BUS I.D. NUMBER
+DUNIT	= $0301		;UNIT NUMBER
+DCOMND	= $0302		;BUS COMMAND
+DSTATS	= $0303		;COMMAND TYPE/STATUS RETURN
+DBUFLO	= $0304		;1-byte low data buffer address
+DBUFHI	= $0305		;1-byte high data buffer address
+DTIMLO	= $0306		;DEVICE TIME OUT IN 1 SECOND UNITS
+DUNUSE	= $0307		;UNUSED BYTE
+DBYTLO	= $0308		;1-byte low number of bytes to transfer
+DBYTHI	= $0309		;1-byte high number of bytes to transfer
+DAUX1	= $030A		;1-byte first command auxiliary
+DAUX2	= $030B		;1-byte second command auxiliary
+
+TIMER1	= $030C		;INITIAL TIMER VALUE
+;ADDCOR	= $030E		;##old## ADDITION CORRECTION
+JMPERS	= $030E		;##1200xl## 1-byte jumper options
+CASFLG	= $030F		;CASSETTE MODE WHEN SET
+TIMER2	= $0310		;2-byte final baud rate timer value
+TEMP1	= $0312		;TEMPORARY STORAGE REGISTER
+;TEMP2	= $0314		;##old## TEMPORARY STORAGE REGISTER
+TEMP2	= $0313		;##1200xl## 1-byte temporary 
+PTIMOT	= $0314		;##1200xl## 1-byte printer timeout
+TEMP3	= $0315		;TEMPORARY STORAGE REGISTER
+SAVIO	= $0316		;SAVE SERIAL IN DATA PORT
+TIMFLG	= $0317		;TIME OUT FLAG FOR BAUD RATE CORRECTION
+STACKP	= $0318		;SIO STACK POINTER SAVE CELL
+TSTAT	= $0319		;TEMPORARY STATUS HOLDER
+
+HATABS	= $031A		;35-byte handler address table (was 38 bytes)
+PUPBT1	= $033D		;##1200xl## 1-byte power-up validation byte 1
+PUPBT2	= $033E		;##1200xl## 1-byte power-up validation byte 2
+PUPBT3	= $033F		;##1200xl## 1-byte power-up validation byte 3
+
+IOCB	= $0340		;I/O CONTROL BLOCKS
+ICHID	= $0340		;HANDLER INDEX NUMBER (FF=IOCB FREE)
+ICDNO	= $0341		;DEVICE NUMBER (DRIVE NUMBER)
+ICCOM	= $0342		;COMMAND CODE
+ICSTA	= $0343		;STATUS OF LAST IOCB ACTION
+ICBAL	= $0344		;1-byte low buffer address
+ICBAH	= $0345		;1-byte high buffer address
+ICPTL	= $0346		;1-byte low PUT-BYTE routine address - 1
+ICPTH	= $0347		;1-byte high PUT-BYTE routine address - 1
+ICBLL	= $0348		;1-byte low buffer length
+ICBLH	= $0349		;1-byte high buffer length
+ICAX1	= $034A		;1-byte first auxiliary information
+ICAX2	= $034B		;1-byte second auxiliary information
+ICAX3	= $034C		;1-byte third auxiliary information
+ICAX4	= $034D		;1-byte fourth auxiliary information
+ICAX5	= $034E		;1-byte fifth auxiliary information
+ICSPR	= $034F		;SPARE BYTE
+
+PRNBUF	= $03C0		;PRINTER BUFFER
+SUPERF	= $03E8		;##1200xl## 1-byte editor super function flag
+CKEY	= $03E9		;##1200xl## 1-byte cassette boot request flag
+CASSBT	= $03EA		;##1200xl## 1-byte cassette boot flag
+CARTCK	= $03EB		;##1200xl## 1-byte cartridge equivalence check
+DERRF	= $03EC		;##rev2## 1-byte screen OPEN error flag
+
+; Remainder of Page Three Not Cleared upon Reset
+
+ACMVAR	= $03ED		;##1200xl## 11 bytes reserved for ACMI
+BASICF	= $03F8		;##rev2## 1-byte BASIC switch flag
+MINTLK	= $03F9		;##1200xl## 1-byte ACMI module interlock
+GINTLK	= $03FA		;##1200xl## 1-byte cartridge interlock
+CHLINK	= $03FB		;##1200xl## 2-byte loaded handler chain link
+CASBUF	= $03FD		;CASSETTE BUFFER
+
+;-------------------------------------------------------------------------
+; Page Four/Five Address Equates
+;-------------------------------------------------------------------------
+
+; USER AREA STARTS HERE AND GOES TO END OF PAGE FIVE
+USAREA	= $0480		;128 bytes reserved for application
+
+LBPR1	= $057E		;LBUFF PREFIX 1
+LBPR2	= $057F		;LBUFF PREFIX 2
+LBUFF	= $0580		;128-byte line buffer
+
+PLYARG	= $05E0		;6-byte floating point polynomial argument
+FPSCR	= $05E6		;6-byte floating point temporary
+FPSCR1	= $05EC		;6-byte floating point temporary
+
+;LBFEND	= $05FF		;##old## END OF LBUFF
+
+;-------------------------------------------------------------------------
+; Cartridge Address Equates
+;-------------------------------------------------------------------------
+
+CARTCS	= $BFFA		;##rev2## 2-byte cartridge coldstart address
+CART	= $BFFC		;##rev2## 1-byte cartridge present indicator
+CARTFG	= $BFFD		;##rev2## 1-byte cartridge flags
+CARTAD	= $BFFE		;##rev2## 2-byte cartridge start vector
+
+;-------------------------------------------------------------------------
+; CTIA/GTIA Address Equates
+;-------------------------------------------------------------------------
+
+GTIA	= $D000		;CTIA/GTIA area
+
+; Read/Write Addresses
+
+CONSOL	= $D01F		;console switches and speaker control
+
+; Read Addresses
+
+M0PF	= $D000		;missile 0 and playfield collision
+M1PF	= $D001		;missile 1 and playfield collision
+M2PF	= $D002		;missile 2 and playfield collision
+M3PF	= $D003		;missile 3 and playfield collision
+
+P0PF	= $D004		;player 0 and playfield collision
+P1PF	= $D005		;player 1 and playfield collision
+P2PF	= $D006		;player 2 and playfield collision
+P3PF	= $D007		;player 3 and playfield collision
+
+M0PL	= $D008		;missile 0 and player collision
+M1PL	= $D009		;missile 1 and player collision
+M2PL	= $D00A		;missile 2 and player collision
+M3PL	= $D00B		;missile 3 and player collision
+
+P0PL	= $D00C		;player 0 and player collision
+P1PL	= $D00D		;player 1 and player collision
+P2PL	= $D00E		;player 2 and player collision
+P3PL	= $D00F		;player 3 and player collision
+
+TRIG0	= $D010		;joystick trigger 0
+TRIG1	= $D011		;joystick trigger 1
+
+TRIG2	= $D012		;cartridge interlock
+TRIG3	= $D013		;ACMI module interlock
+
+PAL	= $D014		;##rev2## PAL/NTSC indicator
+
+; Write Addresses
+
+HPOSP0	= $D000		;player 0 horizontal position
+HPOSP1	= $D001		;player 1 horizontal position
+HPOSP2	= $D002		;player 2 horizontal position
+HPOSP3	= $D003		;player 3 horizontal position
+
+HPOSM0	= $D004		;missile 0 horizontal position
+HPOSM1	= $D005		;missile 1 horizontal position
+HPOSM2	= $D006		;missile 2 horizontal position
+HPOSM3	= $D007		;missile 3 horizontal position
+
+SIZEP0	= $D008		;player 0 size
+SIZEP1	= $D009		;player 1 size
+SIZEP2	= $D00A		;player 2 size
+SIZEP3	= $D00B		;player 3 size
+
+SIZEM	= $D00C		;missile sizes
+
+GRAFP0	= $D00D		;player 0 graphics
+GRAFP1	= $D00E		;player 1 graphics
+GRAFP2	= $D00F		;player 2 graphics
+GRAFP3	= $D010		;player 3 graphics
+
+GRAFM	= $D011		;missile graphics
+
+COLPM0	= $D012		;player-missile 0 color/luminance
+COLPM1	= $D013		;player-missile 1 color/luminance
+COLPM2	= $D014		;player-missile 2 color/luminance
+COLPM3	= $D015		;player-missile 3 color/luminance
+
+COLPF0	= $D016		;playfield 0 color/luminance
+COLPF1	= $D017		;playfield 1 color/luminance
+COLPF2	= $D018		;playfield 2 color/luminance
+COLPF3	= $D019		;playfield 3 color/luminance
+
+COLBK	= $D01A		;background color/luminance
+
+PRIOR	= $D01B		;priority select
+VDELAY	= $D01C		;vertical delay
+GRACTL	= $D01D		;graphic control
+HITCLR	= $D01E		;collision clear
+
+;-------------------------------------------------------------------------
+; PBI Address Equates
+;-------------------------------------------------------------------------
+
+PBI	= $D100		;##rev2## parallel bus interface area
+
+; Read Addresses
+
+PDVI	= $D1FF		;##rev2## parallel device IRQ status
+
+; Write Addresses
+
+PDVS	= $D1FF		;##rev2## parallel device select
+
+; PBI RAM Address Equates
+
+PBIRAM	= $D600		;##rev2## parallel bus interface RAM area
+
+; Parallel Device Address Equates
+
+PDID1	= $D803		;##rev2## parallel device ID 1
+PDIDV	= $D805		;##rev2## parallel device I/O vector
+PDIRQV	= $D808		;##rev2## parallel device IRQ vector
+PDID2	= $D80B		;##rev2## parallel device ID 2
+PDVV	= $D80D		;##rev2## parallel device vector table
+
+;-------------------------------------------------------------------------
+; POKEY Address Equates
+;-------------------------------------------------------------------------
+
+POKEY	= $D200		;POKEY area
+
+; Read Addresses
+
+POT0	= $D200		;potentiometer 0
+POT1	= $D201		;potentiometer 1
+POT2	= $D202		;potentiometer 2
+POT3	= $D203		;potentiometer 3
+POT4	= $D204		;potentiometer 4
+POT5	= $D205		;potentiometer 5
+POT6	= $D206		;potentiometer 6
+POT7	= $D207		;potentiometer 7
+
+ALLPOT	= $D208		;potentiometer port status
+KBCODE	= $D209		;keyboard code
+RANDOM	= $D20A		;random number generator
+SERIN	= $D20D		;serial port input
+IRQST	= $D20E		;IRQ interrupt status
+SKSTAT	= $D20F		;serial port and keyboard status
+
+; Write Addresses
+
+AUDF1	= $D200		;channel 1 audio frequency
+AUDC1	= $D201		;channel 1 audio control
+
+AUDF2	= $D202		;channel 2 audio frequency
+AUDC2	= $D203		;channel 2 audio control
+
+AUDF3	= $D204		;channel 3 audio frequency
+AUDC3	= $D205		;channel 3 audio control
+
+AUDF4	= $D206		;channel 4 audio frequency
+AUDC4	= $D207		;channel 4 audio control
+
+AUDCTL	= $D208		;audio control
+STIMER	= $D209		;start timers
+SKRES	= $D20A		;reset SKSTAT status
+POTGO	= $D20B		;start potentiometer scan sequence
+SEROUT	= $D20D		;serial port output
+IRQEN	= $D20E		;IRQ interrupt enable
+SKCTL	= $D20F		;serial port and keyboard control
+
+;-------------------------------------------------------------------------
+; PIA Address Equates
+;-------------------------------------------------------------------------
+
+PIA	= $D300		;PIA area
+
+PORTA	= $D300		;port A direction register or jacks one/two
+PORTB	= $D301		;port B direction register or memory management
+
+PACTL	= $D302		;port A control
+PBCTL	= $D303		;port B control
+
+;-------------------------------------------------------------------------
+; ANTIC Address Equates
+;-------------------------------------------------------------------------
+
+ANTIC	= $D400		;ANTIC area
+
+; Read Addresses
+
+VCOUNT	= $D40B		;vertical line counter
+PENH	= $D40C		;light pen horizontal position
+PENV	= $D40D		;light pen vertical position
+NMIST	= $D40F		;NMI interrupt status
+
+; Write Addresses
+
+DMACTL	= $D400		;DMA control
+CHACTL	= $D401		;character control
+DLISTL	= $D402		;low display list address
+DLISTH	= $D403		;high display list address
+HSCROL	= $D404		;horizontal scroll
+VSCROL	= $D405		;vertical scroll
+PMBASE	= $D407		;player-missile base address
+CHBASE	= $D409		;character base address
+WSYNC	= $D40A		;wait for HBLANK synchronization
+NMIEN	= $D40E		;NMI enable
+NMIRES	= $D40F		;NMI interrupt reset
+
+;-------------------------------------------------------------------------
+; Floating Point Package Address Equates
+;-------------------------------------------------------------------------
+
+AFP	= $D800		;convert ASCII to floating point
+FASC	= $D8E6		;convert floating point to ASCII
+IFP	= $D9AA		;convert integer to floating point
+FPI	= $D9D2		;convert floating point to integer
+ZFR0	= $DA44		;zero FR0
+ZF1	= $DA46		;zero floating point number
+FSUB	= $DA60		;subtract floating point numbers
+FADD	= $DA66		;add floating point numbers
+FMUL	= $DADB		;multiply floating point numbers
+FDIV	= $DB28		;divide floating point numbers
+PLYEVL	= $DD40		;evaluate floating point polynomial
+FLD0R	= $DD89		;load floating point number
+FLD0P	= $DD8D		;load floating point number
+FLD1R	= $DD98		;load floating point number
+PLD1P	= $DD9C		;load floating point number
+FST0R	= $DDA7		;store floating point number
+FST0P	= $DDAB		;store floating point number
+FMOVE	= $DDB6		;move floating point number
+LOG	= $DECD		;calculate floating point logarithm
+LOG10	= $DED1		;calculate floating point base 10 logarithm
+EXP	= $DDC0		;calculate floating point exponential
+EXP10	= $DDCC		;calculate floating point base 10 exponential
+
+;-------------------------------------------------------------------------
+; Device Handler Vector Table Address Equates
+;-------------------------------------------------------------------------
+
+EDITRV	= $E400		;editor handler vector table
+SCRENV	= $E410		;screen handler vector table
+KEYBDV	= $E420		;keyboard handler vector table
+PRINTV	= $E430		;printer handler vector table
+CASETV	= $E440		;cassette handler vector table
+
+;-------------------------------------------------------------------------
+; Jump Vector Address Equates
+;-------------------------------------------------------------------------
+
+DISKIV	= $E450		;vector to initialize DIO
+DSKINV	= $E453		;vector to DIO
+CIOV	= $E456		;vector to CIO
+SIOV	= $E459		;vector to SIO
+SETVBV	= $E45C		;vector to set VBLANK parameters
+SYSVBV	= $E45F		;vector to process immediate VBLANK
+XITVBV	= $E462		;vector to process deferred VBLANK
+SIOINV	= $E465		;vector to initialize SIO
+SENDEV	= $E468		;vector to enable SEND
+INTINV	= $E46B		;vector to initialize interrupt handler
+CIOINV	= $E46E		;vector to initialize CIO
+BLKBDV	= $E471		;vector to power-up display
+WARMSV	= $E474		;vector to warmstart
+COLDSV	= $E477		;vector to coldstart
+RBLOKV	= $E47A		;vector to read cassette block
+CSOPIV	= $E47D		;vector to open cassette for input
+VCTABL	= $E480		;RAM vector initial value table
+PUPDIV	= $E480		;##rev2## vector to power-up display
+SLFTSV	= $E483		;##rev2## vector to self-test
+PHENTV	= $E486		;##rev2## vector to enter peripheral handler
+PHUNLV	= $E489		;##rev2## vector to unlink peripheral handler
+PHINIV	= $E48C		;##rev2## vector to initialize peripheral handler
+GPDVV	= $E48F		;##rev2## generic parallel device handler vector
+
+; NOTE: OS rom self-test labels are not included in this file
+
+;-------------------------------------------------------------------------
+; Some misc. stuff from the 400/800 rev.B source
+;-------------------------------------------------------------------------
+
+; THE FOLLOWING ARE IN BASIC CARTRIDGE:
+SIN	= $BD81		;FR0 <- SIN (FR0) DEGFLG (0=RAD,6=DEG) CARRY
+COS	= $BD73		;FR0 <- COS (FR0) CARRY
+ATAN	= $BE43		;FR0 <- ATAN(FR0) CARRY
+SQR	= $BEB1		;FR0 <- ROOT(FR0) CARRY
+
+RADON	= 0		;INDICATES RADIANS
+DEGON	= 6		;INDICATES DEGREES
+
+ASCZER	= '0'		;ASCII ZERO
+COLON	= $3A		;ASCII COLON 
+CR	= $9B		;SYSTEM EOL (CARRIAGE RETURN)
+
+;-------------------------------------------------------------------------
+; 6502
+;-------------------------------------------------------------------------
+
+NMIVEC	= $FFFA
+RESVEC	= $FFFC
+IRQVEC	= $FFFE
+
+;-------------------------------------------------------------------------
+; BASIC
+;-------------------------------------------------------------------------
+
+LOMEM	= $80		;2-byte low memory pointer
+VNTP	= $82		;2-byte variable name table address
+VNTD	= $84		;2-byte variable name table end + 1
+VVTP	= $86		;2-byte variable value table
+STMTAB	= $88		;2-byte statement table address
+STMCUR	= $8A		;2-byte current statement pointer
+STARP	= $8C		;2-byte string and array table pointer
+RUNSTK	= $8E		;2-byte runtime stack address
+;MEMTOP	= $90		;2-byte top of memory pointer
+STOPLN	= $BA		;2-byte stopped line number
+ERRSAVE	= $C3		;1-byte error code
+PTABW	= $C9		;1-byte tab width
+
+;-------------------------------------------------------------------------
+; DOS
+;-------------------------------------------------------------------------
+
+DOS	= $0700
+
+RENAME	= $20		;RENAME DISK FILE
+DELETE	= $21		;DELETE DISK FILE
+LOCKFL	= $23		;LOCK FILE TO READ ONLY
+UNLOCK	= $24		;UNLOCK LOCKED FILE
+POINT	= $25		;POINT SECTOR
+NOTE	= $26		;NOTE SECTOR
+FORMAT	= $FE		;FORMAT
+
+; Command line table, Index values for (DOSVEC),Y -- COMTAB
+; Compatible with OS/A+, DOS XL and SpartaDOS
+
+COMTAB	= 0		;DOS entry jump vector
+ZCRNAME	= 3		;file name crunch routine jump vector
+BUFOFF	= 10		;next parameter buffer offset
+COMFNAM	= 33		;destination buffer for crunch routine
+LBUF	= 63		;command line input buffer
+
+;-------------------------------------------------------------------------
+; ATASCII CHARACTER DEFS
+;-------------------------------------------------------------------------
+
+ATCLR	= $7D		;CLEAR SCREEN CHARACTER
+ATRUB	= $7E		;BACK SPACE (RUBOUT)
+ATTAB	= $7F		;TAB
+ATEOL	= $9B		;END-OF-LINE
+ATDELL	= $9C		;delete line
+ATINSL	= $9D		;insert line
+ATCTAB	= $9E		;clear TAB
+ATSTAB	= $9F		;set TAB
+ATBEL	= $FD		;CONSOLE BELL
+ATDEL	= $FE		;delete char.
+ATINS	= $FF		;insert char.
+ATURW	= $1C		;UP-ARROW
+ATDRW	= $1D		;DOWN-ARROW
+ATLRW	= $1E		;LEFT-ARROW
+ATRRW	= $1F		;RIGHT-ARROW
+ATESC	= $1B		;ESCAPE
+
+;-------------------------------------------------------------------------
+; OFFSETS INTO SECTSIZETAB (DIO functions)
+;-------------------------------------------------------------------------
+
+sst_flag     = 0	; length 1
+sst_sectsize = 1	;        2
+sst_driveno  = 3	;        1  (drive #)
+sst_size     = 4	; size of one entry
+			; if changed, adapt diopncls.s
+
+;-------------------------------------------------------------------------
+; OFFSETS INTO dio_phys_pos
+;-------------------------------------------------------------------------
+
+diopp_head   = 0	; head
+diopp_track  = 1	; track / cylinder
+diopp_sector = 3	; sector
+diopp_size   = 5	; size of structure
+
+;-------------------------------------------------------------------------
+; VALUES for dos_type
+;-------------------------------------------------------------------------
+
+ATARIDOS     = 0
+SPARTADOS    = 1
+OSADOS       = 2	; OS/A+
+MYDOS        = 3
+NODOS        = 255
+
+;-------------------------------------------------------------------------
+; End of atari.inc
+;-------------------------------------------------------------------------
+