bunnicula 0.2.0 → 0.2.1

data/vendor/daemon_kit/daemon-kit/vendor/tmail-1.2.3/tmail/loader.rb

@@ -0,0 +1,3 @@
+#:stopdoc:
+require 'tmail/mailbox'
+#:startdoc:

data/vendor/daemon_kit/daemon-kit/vendor/tmail-1.2.3/tmail/mail.rb

@@ -0,0 +1,578 @@
+=begin rdoc
+
+= Mail class
+
+=end
+#--
+# Copyright (c) 1998-2003 Minero Aoki <aamine@loveruby.net>
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Note: Originally licensed under LGPL v2+. Using MIT license for Rails
+# with permission of Minero Aoki.
+#++
+
+ 
+
+require 'tmail/interface'
+require 'tmail/encode'
+require 'tmail/header'
+require 'tmail/port'
+require 'tmail/config'
+require 'tmail/utils'
+require 'tmail/attachments'
+require 'tmail/quoting'
+require 'socket'
+
+module TMail
+
+  # == Mail Class
+  # 
+  # Accessing a TMail object done via the TMail::Mail class.  As email can be fairly complex
+  # creatures, you will find a large amount of accessor and setter methods in this class!
+  # 
+  # Most of the below methods handle the header, in fact, what TMail does best is handle the
+  # header of the email object.  There are only a few methods that deal directly with the body
+  # of the email, such as base64_encode and base64_decode.
+  # 
+  # === Using TMail inside your code
+  # 
+  # The usual way is to install the gem (see the {README}[link:/README] on how to do this) and
+  # then put at the top of your class:
+  # 
+  #  require 'tmail'
+  # 
+  # You can then create a new TMail object in your code with:
+  # 
+  #  @email = TMail::Mail.new
+  # 
+  # Or if you have an email as a string, you can initialize a new TMail::Mail object and get it
+  # to parse that string for you like so:
+  # 
+  #  @email = TMail::Mail.parse(email_text)
+  # 
+  # You can also read a single email off the disk, for example:
+  # 
+  #  @email = TMail::Mail.load('filename.txt')
+  # 
+  # Also, you can read a mailbox (usual unix mbox format) and end up with an array of TMail
+  # objects by doing something like this:
+  # 
+  #  # Note, we pass true as the last variable to open the mailbox read only
+  #  mailbox = TMail::UNIXMbox.new("mailbox", nil, true)
+  #  @emails = []
+  #  mailbox.each_port { |m| @emails << TMail::Mail.new(m) }
+  #
+  class Mail
+
+    class << self
+      
+      # Opens an email that has been saved out as a file by itself.
+      # 
+      # This function will read a file non-destructively and then parse
+      # the contents and return a TMail::Mail object.
+      # 
+      # Does not handle multiple email mailboxes (like a unix mbox) for that
+      # use the TMail::UNIXMbox class.
+      # 
+      # Example:
+      #  mail = TMail::Mail.load('filename')
+      # 
+      def load( fname )
+        new(FilePort.new(fname))
+      end
+
+      alias load_from load
+      alias loadfrom load
+      
+      # Parses an email from the supplied string and returns a TMail::Mail
+      # object.
+      # 
+      # Example:
+      #  require 'rubygems'; require 'tmail'
+      #  email_string =<<HEREDOC
+      #  To: mikel@lindsaar.net
+      #  From: mikel@me.com
+      #  Subject: This is a short Email
+      #  
+      #  Hello there Mikel!
+      #  
+      #  HEREDOC
+      #  mail = TMail::Mail.parse(email_string)
+      #  #=> #<TMail::Mail port=#<TMail::StringPort:id=0xa30ac0> bodyport=nil>
+      #  mail.body
+      #  #=> "Hello there Mikel!\n\n"
+      def parse( str )
+        new(StringPort.new(str))
+      end
+
+    end
+
+    def initialize( port = nil, conf = DEFAULT_CONFIG ) #:nodoc:
+      @port = port || StringPort.new
+      @config = Config.to_config(conf)
+
+      @header      = {}
+      @body_port   = nil
+      @body_parsed = false
+      @epilogue    = ''
+      @parts       = []
+
+      @port.ropen {|f|
+          parse_header f
+          parse_body f unless @port.reproducible?
+      }
+    end
+
+    # Provides access to the port this email is using to hold it's data
+    # 
+    # Example:
+    #  mail = TMail::Mail.parse(email_string)
+    #  mail.port
+    #  #=> #<TMail::StringPort:id=0xa2c952>
+    attr_reader :port
+
+    def inspect
+      "\#<#{self.class} port=#{@port.inspect} bodyport=#{@body_port.inspect}>"
+    end
+
+    #
+    # to_s interfaces
+    #
+
+    public
+
+    include StrategyInterface
+
+    def write_back( eol = "\n", charset = 'e' )
+      parse_body
+      @port.wopen {|stream| encoded eol, charset, stream }
+    end
+
+    def accept( strategy )
+      with_multipart_encoding(strategy) {
+          ordered_each do |name, field|
+            next if field.empty?
+            strategy.header_name canonical(name)
+            field.accept strategy
+            strategy.puts
+          end
+          strategy.puts
+          body_port().ropen {|r|
+              strategy.write r.read
+          }
+      }
+    end
+
+    private
+
+    def canonical( name )
+      name.split(/-/).map {|s| s.capitalize }.join('-')
+    end
+
+    def with_multipart_encoding( strategy )
+      if parts().empty?    # DO NOT USE @parts
+        yield
+
+      else
+        bound = ::TMail.new_boundary
+        if @header.key? 'content-type'
+          @header['content-type'].params['boundary'] = bound
+        else
+          store 'Content-Type', %<multipart/mixed; boundary="#{bound}">
+        end
+
+        yield
+
+        parts().each do |tm|
+          strategy.puts
+          strategy.puts '--' + bound
+          tm.accept strategy
+        end
+        strategy.puts
+        strategy.puts '--' + bound + '--'
+        strategy.write epilogue()
+      end
+    end
+
+    ###
+    ### header
+    ###
+
+    public
+
+    ALLOW_MULTIPLE = {
+      'received'          => true,
+      'resent-date'       => true,
+      'resent-from'       => true,
+      'resent-sender'     => true,
+      'resent-to'         => true,
+      'resent-cc'         => true,
+      'resent-bcc'        => true,
+      'resent-message-id' => true,
+      'comments'          => true,
+      'keywords'          => true
+    }
+    USE_ARRAY = ALLOW_MULTIPLE
+
+    def header
+      @header.dup
+    end
+
+    # Returns a TMail::AddressHeader object of the field you are querying.
+    # Examples:
+    #  @mail['from']  #=> #<TMail::AddressHeader "mikel@test.com.au">
+    #  @mail['to']    #=> #<TMail::AddressHeader "mikel@test.com.au">
+    #
+    # You can get the string value of this by passing "to_s" to the query:
+    # Example:
+    #  @mail['to'].to_s #=> "mikel@test.com.au"
+    def []( key )
+      @header[key.downcase]
+    end
+
+    def sub_header(key, param)
+      (hdr = self[key]) ? hdr[param] : nil
+    end
+
+    alias fetch []
+
+    # Allows you to set or delete TMail header objects at will.
+    # Examples:
+    #  @mail = TMail::Mail.new
+    #  @mail['to'].to_s       # => 'mikel@test.com.au'
+    #  @mail['to'] = 'mikel@elsewhere.org'
+    #  @mail['to'].to_s       # => 'mikel@elsewhere.org'
+    #  @mail.encoded          # => "To: mikel@elsewhere.org\r\n\r\n"
+    #  @mail['to'] = nil
+    #  @mail['to'].to_s       # => nil
+    #  @mail.encoded          # => "\r\n"
+    # 
+    # Note: setting mail[] = nil actually deletes the header field in question from the object,
+    # it does not just set the value of the hash to nil
+    def []=( key, val )
+      dkey = key.downcase
+
+      if val.nil?
+        @header.delete dkey
+        return nil
+      end
+
+      case val
+      when String
+        header = new_hf(key, val)
+      when HeaderField
+        ;
+      when Array
+        ALLOW_MULTIPLE.include? dkey or
+                raise ArgumentError, "#{key}: Header must not be multiple"
+        @header[dkey] = val
+        return val
+      else
+        header = new_hf(key, val.to_s)
+      end
+      if ALLOW_MULTIPLE.include? dkey
+        (@header[dkey] ||= []).push header
+      else
+        @header[dkey] = header
+      end
+
+      val
+    end
+
+    alias store []=
+    
+    # Allows you to loop through each header in the TMail::Mail object in a block
+    # Example:
+    #   @mail['to'] = 'mikel@elsewhere.org'
+    #   @mail['from'] = 'me@me.com'
+    #   @mail.each_header { |k,v| puts "#{k} = #{v}" }
+    #   # => from = me@me.com
+    #   # => to = mikel@elsewhere.org
+    def each_header
+      @header.each do |key, val|
+        [val].flatten.each {|v| yield key, v }
+      end
+    end
+
+    alias each_pair each_header
+
+    def each_header_name( &block )
+      @header.each_key(&block)
+    end
+
+    alias each_key each_header_name
+
+    def each_field( &block )
+      @header.values.flatten.each(&block)
+    end
+
+    alias each_value each_field
+
+    FIELD_ORDER = %w(
+      return-path received
+      resent-date resent-from resent-sender resent-to
+      resent-cc resent-bcc resent-message-id
+      date from sender reply-to to cc bcc
+      message-id in-reply-to references
+      subject comments keywords
+      mime-version content-type content-transfer-encoding
+      content-disposition content-description
+    )
+
+    def ordered_each
+      list = @header.keys
+      FIELD_ORDER.each do |name|
+        if list.delete(name)
+          [@header[name]].flatten.each {|v| yield name, v }
+        end
+      end
+      list.each do |name|
+        [@header[name]].flatten.each {|v| yield name, v }
+      end
+    end
+
+    def clear
+      @header.clear
+    end
+
+    def delete( key )
+      @header.delete key.downcase
+    end
+
+    def delete_if
+      @header.delete_if do |key,val|
+        if Array === val
+          val.delete_if {|v| yield key, v }
+          val.empty?
+        else
+          yield key, val
+        end
+      end
+    end
+
+    def keys
+      @header.keys
+    end
+
+    def key?( key )
+      @header.key? key.downcase
+    end
+
+    def values_at( *args )
+      args.map {|k| @header[k.downcase] }.flatten
+    end
+
+    alias indexes values_at
+    alias indices values_at
+
+    private
+
+    def parse_header( f )
+      name = field = nil
+      unixfrom = nil
+
+      while line = f.gets
+        case line
+        when /\A[ \t]/             # continue from prev line
+          raise SyntaxError, 'mail is began by space' unless field
+          field << ' ' << line.strip
+
+        when /\A([^\: \t]+):\s*/   # new header line
+          add_hf name, field if field
+          name = $1
+          field = $' #.strip
+
+        when /\A\-*\s*\z/          # end of header
+          add_hf name, field if field
+          name = field = nil
+          break
+
+        when /\AFrom (\S+)/
+          unixfrom = $1
+
+        when /^charset=.*/
+
+        else
+          raise SyntaxError, "wrong mail header: '#{line.inspect}'"
+        end
+      end
+      add_hf name, field if name
+
+      if unixfrom
+        add_hf 'Return-Path', "<#{unixfrom}>" unless @header['return-path']
+      end
+    end
+
+    def add_hf( name, field )
+      key = name.downcase
+      field = new_hf(name, field)
+
+      if ALLOW_MULTIPLE.include? key
+        (@header[key] ||= []).push field
+      else
+        @header[key] = field
+      end
+    end
+
+    def new_hf( name, field )
+      HeaderField.new(name, field, @config)
+    end
+
+    ###
+    ### body
+    ###
+
+    public
+
+    def body_port
+      parse_body
+      @body_port
+    end
+
+    def each( &block )
+      body_port().ropen {|f| f.each(&block) }
+    end
+
+    def quoted_body
+      body_port.ropen {|f| return f.read }
+    end
+
+    def quoted_body= str
+      body_port.wopen { |f| f.write str }
+      str
+    end
+
+    def body=( str )
+      # Sets the body of the email to a new (encoded) string.
+      # 
+      # We also reparses the email if the body is ever reassigned, this is a performance hit, however when
+      # you assign the body, you usually want to be able to make sure that you can access the attachments etc.
+      # 
+      # Usage:
+      # 
+      #  mail.body = "Hello, this is\nthe body text"
+      #  # => "Hello, this is\nthe body"
+      #  mail.body
+      #  # => "Hello, this is\nthe body"
+      @body_parsed = false
+      parse_body(StringInput.new(str))
+      parse_body
+      @body_port.wopen {|f| f.write str }
+      str
+    end
+
+    alias preamble  quoted_body
+    alias preamble= quoted_body=
+
+    def epilogue
+      parse_body
+      @epilogue.dup
+    end
+
+    def epilogue=( str )
+      parse_body
+      @epilogue = str
+      str
+    end
+
+    def parts
+      parse_body
+      @parts
+    end
+    
+    def each_part( &block )
+      parts().each(&block)
+    end
+    
+    # Returns true if the content type of this part of the email is
+    # a disposition attachment
+    def disposition_is_attachment?
+      (self['content-disposition'] && self['content-disposition'].disposition == "attachment")
+    end
+
+    # Returns true if this part's content main type is text, else returns false.
+    # By main type is meant "text/plain" is text.  "text/html" is text
+    def content_type_is_text?
+      self.header['content-type'] && (self.header['content-type'].main_type != "text")
+    end
+
+    private
+
+    def parse_body( f = nil )
+      return if @body_parsed
+      if f
+        parse_body_0 f
+      else
+        @port.ropen {|f|
+            skip_header f
+            parse_body_0 f
+        }
+      end
+      @body_parsed = true
+    end
+
+    def skip_header( f )
+      while line = f.gets
+        return if /\A[\r\n]*\z/ === line
+      end
+    end
+
+    def parse_body_0( f )
+      if multipart?
+        read_multipart f
+      else
+        @body_port = @config.new_body_port(self)
+        @body_port.wopen {|w|
+            w.write f.read
+        }
+      end
+    end
+    
+    def read_multipart( src )
+      bound = @header['content-type'].params['boundary']
+      is_sep = /\A--#{Regexp.quote bound}(?:--)?[ \t]*(?:\n|\r\n|\r)/
+      lastbound = "--#{bound}--"
+
+      ports = [ @config.new_preamble_port(self) ]
+      begin
+        f = ports.last.wopen
+        while line = src.gets
+          if is_sep === line
+            f.close
+            break if line.strip == lastbound
+            ports.push @config.new_part_port(self)
+            f = ports.last.wopen
+          else
+            f << line
+          end
+        end
+        @epilogue = (src.read || '')
+      ensure
+        f.close if f and not f.closed?
+      end
+
+      @body_port = ports.shift
+      @parts = ports.map {|p| self.class.new(p, @config) }
+    end
+
+  end   # class Mail
+
+end   # module TMail