bundler 2.0.0 → 2.1.2

data/man/bundle-binstubs.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-BINSTUBS" "1" "December 2018" "" ""
+.TH "BUNDLE\-BINSTUBS" "1" "December 2019" "" ""
 .
 .SH "NAME"
 \fBbundle\-binstubs\fR \- Install the binstubs of the listed gems
@@ -10,7 +10,7 @@
 \fBbundle binstubs\fR \fIGEM_NAME\fR [\-\-force] [\-\-path PATH] [\-\-standalone]
 .
 .SH "DESCRIPTION"
-Binstubs are scripts that wrap around executables\. Bundler creates a small Ruby file (a binstub) that loads Bundler, runs the command, and puts it into \fBbin/\fR\. Binstubs are a shortcut\-or alternative\- to always using \fBbundle exec\fR\. This gives you a file that can by run directly, and one that will always run the correct gem version used by the application\.
+Binstubs are scripts that wrap around executables\. Bundler creates a small Ruby file (a binstub) that loads Bundler, runs the command, and puts it into \fBbin/\fR\. Binstubs are a shortcut\-or alternative\- to always using \fBbundle exec\fR\. This gives you a file that can be run directly, and one that will always run the correct gem version used by the application\.
 .
 .P
 For example, if you run \fBbundle binstubs rspec\-core\fR, Bundler will create the file \fBbin/rspec\fR\. That file will contain enough code to load Bundler, tell it to load the bundled gems, and then run rspec\.

data/man/bundle-binstubs.1.txt

@@ -12,7 +12,7 @@ DESCRIPTION
        Binstubs  are  scripts  that wrap around executables. Bundler creates a
        small Ruby file (a binstub) that loads Bundler, runs the  command,  and
        puts  it  into  bin/. Binstubs are a shortcut-or alternative- to always
-       using bundle exec. This gives you a file that can by run directly,  and
+       using bundle exec. This gives you a file that can be run directly,  and
        one  that  will always run the correct gem version used by the applica-
        tion.
 
@@ -45,4 +45,4 @@ BUNDLE INSTALL --BINSTUBS
 
 
 
-				 December 2018		    BUNDLE-BINSTUBS(1)
+				 December 2019		    BUNDLE-BINSTUBS(1)

data/man/bundle-binstubs.ronn

@@ -10,7 +10,7 @@ bundle-binstubs(1) -- Install the binstubs of the listed gems
 Binstubs are scripts that wrap around executables. Bundler creates a
 small Ruby file (a binstub) that loads Bundler, runs the command,
 and puts it into `bin/`. Binstubs are a shortcut-or alternative-
-to always using `bundle exec`. This gives you a file that can by run
+to always using `bundle exec`. This gives you a file that can be run
 directly, and one that will always run the correct gem version
 used by the application.
 

data/man/bundle-cache.1

@@ -0,0 +1,55 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-CACHE" "1" "December 2019" "" ""
+.
+.SH "NAME"
+\fBbundle\-cache\fR \- Package your needed \fB\.gem\fR files into your application
+.
+.SH "SYNOPSIS"
+\fBbundle cache\fR
+.
+.SH "DESCRIPTION"
+Copy all of the \fB\.gem\fR files needed to run the application into the \fBvendor/cache\fR directory\. In the future, when running [bundle install(1)][bundle\-install], use the gems in the cache in preference to the ones on \fBrubygems\.org\fR\.
+.
+.SH "GIT AND PATH GEMS"
+The \fBbundle cache\fR command can also package \fB:git\fR and \fB:path\fR dependencies besides \.gem files\. This needs to be explicitly enabled via the \fB\-\-all\fR option\. Once used, the \fB\-\-all\fR option will be remembered\.
+.
+.SH "SUPPORT FOR MULTIPLE PLATFORMS"
+When using gems that have different packages for different platforms, Bundler supports caching of gems for other platforms where the Gemfile has been resolved (i\.e\. present in the lockfile) in \fBvendor/cache\fR\. This needs to be enabled via the \fB\-\-all\-platforms\fR option\. This setting will be remembered in your local bundler configuration\.
+.
+.SH "REMOTE FETCHING"
+By default, if you run \fBbundle install(1)\fR](bundle\-install\.1\.html) after running bundle cache(1) \fIbundle\-cache\.1\.html\fR, bundler will still connect to \fBrubygems\.org\fR to check whether a platform\-specific gem exists for any of the gems in \fBvendor/cache\fR\.
+.
+.P
+For instance, consider this Gemfile(5):
+.
+.IP "" 4
+.
+.nf
+
+source "https://rubygems\.org"
+
+gem "nokogiri"
+.
+.fi
+.
+.IP "" 0
+.
+.P
+If you run \fBbundle cache\fR under C Ruby, bundler will retrieve the version of \fBnokogiri\fR for the \fB"ruby"\fR platform\. If you deploy to JRuby and run \fBbundle install\fR, bundler is forced to check to see whether a \fB"java"\fR platformed \fBnokogiri\fR exists\.
+.
+.P
+Even though the \fBnokogiri\fR gem for the Ruby platform is \fItechnically\fR acceptable on JRuby, it has a C extension that does not run on JRuby\. As a result, bundler will, by default, still connect to \fBrubygems\.org\fR to check whether it has a version of one of your gems more specific to your platform\.
+.
+.P
+This problem is also not limited to the \fB"java"\fR platform\. A similar (common) problem can happen when developing on Windows and deploying to Linux, or even when developing on OSX and deploying to Linux\.
+.
+.P
+If you know for sure that the gems packaged in \fBvendor/cache\fR are appropriate for the platform you are on, you can run \fBbundle install \-\-local\fR to skip checking for more appropriate gems, and use the ones in \fBvendor/cache\fR\.
+.
+.P
+One way to be sure that you have the right platformed versions of all your gems is to run \fBbundle cache\fR on an identical machine and check in the gems\. For instance, you can run \fBbundle cache\fR on an identical staging box during your staging process, and check in the \fBvendor/cache\fR before deploying to production\.
+.
+.P
+By default, bundle cache(1) \fIbundle\-cache\.1\.html\fR fetches and also installs the gems to the default location\. To package the dependencies to \fBvendor/cache\fR without installing them to the local install location, you can run \fBbundle cache \-\-no\-install\fR\.

data/man/bundle-cache.1.txt

@@ -0,0 +1,78 @@
+BUNDLE-CACHE(1) 					       BUNDLE-CACHE(1)
+
+
+
+NAME
+       bundle-cache - Package your needed .gem files into your application
+
+SYNOPSIS
+       bundle cache
+
+DESCRIPTION
+       Copy  all of the .gem files needed to run the application into the ven-
+       dor/cache   directory.	In   the   future,   when   running    [bundle
+       install(1)][bundle-install], use the gems in the cache in preference to
+       the ones on rubygems.org.
+
+GIT AND PATH GEMS
+       The bundle cache command can also package :git and  :path  dependencies
+       besides	.gem  files. This needs to be explicitly enabled via the --all
+       option. Once used, the --all option will be remembered.
+
+SUPPORT FOR MULTIPLE PLATFORMS
+       When using gems that have different packages for  different  platforms,
+       Bundler	supports caching of gems for other platforms where the Gemfile
+       has been resolved (i.e. present in the lockfile) in vendor/cache.  This
+       needs  to  be enabled via the --all-platforms option. This setting will
+       be remembered in your local bundler configuration.
+
+REMOTE FETCHING
+       By default, if you run bundle install(1)](bundle-install.1.html)  after
+       running bundle cache(1) bundle-cache.1.html, bundler will still connect
+       to rubygems.org to check whether a platform-specific gem exists for any
+       of the gems in vendor/cache.
+
+       For instance, consider this Gemfile(5):
+
+
+
+	   source "https://rubygems.org"
+
+	   gem "nokogiri"
+
+
+
+       If you run bundle cache under C Ruby, bundler will retrieve the version
+       of nokogiri for the "ruby" platform. If you deploy  to  JRuby  and  run
+       bundle  install,  bundler  is  forced  to check to see whether a "java"
+       platformed nokogiri exists.
+
+       Even though the nokogiri gem  for  the  Ruby  platform  is  technically
+       acceptable  on  JRuby, it has a C extension that does not run on JRuby.
+       As a result, bundler will, by default, still connect to rubygems.org to
+       check  whether  it  has	a version of one of your gems more specific to
+       your platform.
+
+       This problem is also not limited to  the  "java"  platform.  A  similar
+       (common) problem can happen when developing on Windows and deploying to
+       Linux, or even when developing on OSX and deploying to Linux.
+
+       If you know for sure that the gems packaged in vendor/cache are	appro-
+       priate  for the platform you are on, you can run bundle install --local
+       to skip checking for more appropriate gems, and use the	ones  in  ven-
+       dor/cache.
+
+       One  way  to be sure that you have the right platformed versions of all
+       your gems is to run bundle cache on an identical machine and  check  in
+       the  gems. For instance, you can run bundle cache on an identical stag-
+       ing box during your staging process,  and  check  in  the  vendor/cache
+       before deploying to production.
+
+       By  default,  bundle  cache(1)  bundle-cache.1.html  fetches  and  also
+       installs the gems to the default location. To package the  dependencies
+       to  vendor/cache without installing them to the local install location,
+       you can run bundle cache --no-install.
+
+
+
+				 December 2019		       BUNDLE-CACHE(1)

data/man/{bundle-package.ronn → bundle-cache.ronn}

@@ -1,9 +1,9 @@
-bundle-package(1) -- Package your needed `.gem` files into your application
+bundle-cache(1) -- Package your needed `.gem` files into your application
 ===========================================================================
 
 ## SYNOPSIS
 
-`bundle package`
+`bundle cache`
 
 ## DESCRIPTION
 
@@ -13,22 +13,22 @@ use the gems in the cache in preference to the ones on `rubygems.org`.
 
 ## GIT AND PATH GEMS
 
-Since Bundler 1.2, the `bundle package` command can also package `:git` and
-`:path` dependencies besides .gem files. This needs to be explicitly enabled
-via the `--all` option. Once used, the `--all` option will be remembered.
+The `bundle cache` command can also package `:git` and `:path` dependencies
+besides .gem files. This needs to be explicitly enabled via the `--all` option.
+Once used, the `--all` option will be remembered.
 
 ## SUPPORT FOR MULTIPLE PLATFORMS
 
 When using gems that have different packages for different platforms, Bundler
-1.8 and newer support caching of gems for other platforms where the Gemfile
-has been resolved (i.e. present in the lockfile) in `vendor/cache`.  This needs
-to be enabled via the `--all-platforms` option. This setting will be remembered
-in your local bundler configuration.
+supports caching of gems for other platforms where the Gemfile has been resolved
+(i.e. present in the lockfile) in `vendor/cache`.  This needs to be enabled via
+the `--all-platforms` option. This setting will be remembered in your local
+bundler configuration.
 
 ## REMOTE FETCHING
 
 By default, if you run `bundle install(1)`](bundle-install.1.html) after running
-[bundle package(1)](bundle-package.1.html), bundler will still connect to `rubygems.org`
+[bundle cache(1)](bundle-cache.1.html), bundler will still connect to `rubygems.org`
 to check whether a platform-specific gem exists for any of the gems
 in `vendor/cache`.
 
@@ -38,7 +38,7 @@ For instance, consider this Gemfile(5):
 
     gem "nokogiri"
 
-If you run `bundle package` under C Ruby, bundler will retrieve
+If you run `bundle cache` under C Ruby, bundler will retrieve
 the version of `nokogiri` for the `"ruby"` platform. If you deploy
 to JRuby and run `bundle install`, bundler is forced to check to
 see whether a `"java"` platformed `nokogiri` exists.
@@ -60,13 +60,13 @@ are appropriate for the platform you are on, you can run
 gems, and use the ones in `vendor/cache`.
 
 One way to be sure that you have the right platformed versions
-of all your gems is to run `bundle package` on an identical
+of all your gems is to run `bundle cache` on an identical
 machine and check in the gems. For instance, you can run
-`bundle package` on an identical staging box during your
+`bundle cache` on an identical staging box during your
 staging process, and check in the `vendor/cache` before
 deploying to production.
 
-By default, [bundle package(1)](bundle-package.1.html) fetches and also
+By default, [bundle cache(1)](bundle-cache.1.html) fetches and also
 installs the gems to the default location. To package the
 dependencies to `vendor/cache` without installing them to the
-local install location, you can run `bundle package --no-install`.
+local install location, you can run `bundle cache --no-install`.

data/man/bundle-check.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-CHECK" "1" "December 2018" "" ""
+.TH "BUNDLE\-CHECK" "1" "December 2019" "" ""
 .
 .SH "NAME"
 \fBbundle\-check\fR \- Verifies if dependencies are satisfied by installed gems

data/man/bundle-check.1.txt

@@ -9,8 +9,8 @@ SYNOPSIS
        bundle check [--dry-run] [--gemfile=FILE] [--path=PATH]
 
 DESCRIPTION
-       check searches the local machine for each of the gems requested in  the
-       Gemfile.  If  all  gems are found, Bundler prints a success message and
+       check  searches the local machine for each of the gems requested in the
+       Gemfile. If all gems are found, Bundler prints a  success  message  and
        exits with a status of 0.
 
        If not, the first missing gem is listed and Bundler exits status 1.
@@ -20,14 +20,14 @@ OPTIONS
 	      Locks the [Gemfile(5)][Gemfile(5)] before running the command.
 
        --gemfile
-	      Use the  specified  gemfile  instead  of	the  [Gemfile(5)][Gem-
+	      Use  the	specified  gemfile  instead  of  the [Gemfile(5)][Gem-
 	      file(5)].
 
-       --path Specify  a  different path than the system default ($BUNDLE_PATH
-	      or $GEM_HOME). Bundler  will  remember  this  value  for	future
+       --path Specify a different path than the system	default  ($BUNDLE_PATH
+	      or  $GEM_HOME).  Bundler	will  remember	this  value for future
 	      installs on this machine.
 
 
 
 
-				 December 2018		       BUNDLE-CHECK(1)
+				 December 2019		       BUNDLE-CHECK(1)

data/man/bundle-clean.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-CLEAN" "1" "December 2018" "" ""
+.TH "BUNDLE\-CLEAN" "1" "December 2019" "" ""
 .
 .SH "NAME"
 \fBbundle\-clean\fR \- Cleans up unused gems in your bundler directory

data/man/bundle-clean.1.txt

@@ -23,4 +23,4 @@ OPTIONS
 
 
 
-				 December 2018		       BUNDLE-CLEAN(1)
+				 December 2019		       BUNDLE-CLEAN(1)

data/man/bundle-config.1

@@ -1,13 +1,13 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-CONFIG" "1" "January 2019" "" ""
+.TH "BUNDLE\-CONFIG" "1" "December 2019" "" ""
 .
 .SH "NAME"
 \fBbundle\-config\fR \- Set bundler configuration options
 .
 .SH "SYNOPSIS"
-\fBbundle config\fR [\fIname\fR [\fIvalue\fR]]
+\fBbundle config\fR [list|get|set|unset] [\fIname\fR [\fIvalue\fR]]
 .
 .SH "DESCRIPTION"
 This command allows you to interact with Bundler\'s configuration system\.
@@ -30,31 +30,40 @@ Bundler default config
 .IP "" 0
 .
 .P
-Executing \fBbundle config\fR with no parameters will print a list of all bundler configuration for the current bundle, and where that configuration was set\.
+Executing \fBbundle config list\fR with will print a list of all bundler configuration for the current bundle, and where that configuration was set\.
 .
 .P
-Executing \fBbundle config <name>\fR will print the value of that configuration setting, and where it was set\.
+Executing \fBbundle config get <name>\fR will print the value of that configuration setting, and where it was set\.
 .
 .P
-Executing \fBbundle config <name> <value>\fR will set that configuration to the value specified for all bundles executed as the current user\. The configuration will be stored in \fB~/\.bundle/config\fR\. If \fIname\fR already is set, \fIname\fR will be overridden and user will be warned\.
+Executing \fBbundle config set <name> <value>\fR will set that configuration to the value specified for all bundles executed as the current user\. The configuration will be stored in \fB~/\.bundle/config\fR\. If \fIname\fR already is set, \fIname\fR will be overridden and user will be warned\.
 .
 .P
-Executing \fBbundle config \-\-global <name> <value>\fR works the same as above\.
+Executing \fBbundle config set \-\-global <name> <value>\fR works the same as above\.
 .
 .P
-Executing \fBbundle config \-\-local <name> <value>\fR will set that configuration to the local application\. The configuration will be stored in \fBapp/\.bundle/config\fR\.
+Executing \fBbundle config set \-\-local <name> <value>\fR will set that configuration to the local application\. The configuration will be stored in \fBapp/\.bundle/config\fR\.
 .
 .P
-Executing \fBbundle config \-\-delete <name>\fR will delete the configuration in both local and global sources\. Not compatible with \-\-global or \-\-local flag\.
+Executing \fBbundle config unset <name>\fR will delete the configuration in both local and global sources\.
+.
+.P
+Executing \fBbundle config unset \-\-global <name>\fR will delete the configuration only from the user configuration\.
+.
+.P
+Executing \fBbundle config unset \-\-local <name> <value>\fR will delete the configuration only from the local application\.
 .
 .P
 Executing bundle with the \fBBUNDLE_IGNORE_CONFIG\fR environment variable set will cause it to ignore all configuration\.
 .
 .P
-Executing \fBbundle config disable_multisource true\fR upgrades the warning about the Gemfile containing multiple primary sources to an error\. Executing \fBbundle config \-\-delete disable_multisource\fR downgrades this error to a warning\.
+Executing \fBbundle config set disable_multisource true\fR upgrades the warning about the Gemfile containing multiple primary sources to an error\. Executing \fBbundle config unset disable_multisource\fR downgrades this error to a warning\.
 .
 .SH "REMEMBERING OPTIONS"
-Flags passed to \fBbundle install\fR or the Bundler runtime, such as \fB\-\-path foo\fR or \fB\-\-without production\fR, are not remembered between commands\. If these options must be remembered,they must be set using \fBbundle config\fR (e\.g\., \fBbundle config path foo\fR)\.
+Flags passed to \fBbundle install\fR or the Bundler runtime, such as \fB\-\-path foo\fR or \fB\-\-without production\fR, are remembered between commands and saved to your local application\'s configuration (normally, \fB\./\.bundle/config\fR)\.
+.
+.P
+However, this will be changed in bundler 3, so it\'s better not to rely on this behavior\. If these options must be remembered, it\'s better to set them using \fBbundle config\fR (e\.g\., \fBbundle config set path foo\fR)\.
 .
 .P
 The options that can be configured are:
@@ -102,7 +111,7 @@ Since the specific location of that executable can change from machine to machin
 .
 .nf
 
-bundle config build\.mysql \-\-with\-mysql\-config=/usr/local/mysql/bin/mysql_config
+bundle config set build\.mysql \-\-with\-mysql\-config=/usr/local/mysql/bin/mysql_config
 .
 .fi
 .
@@ -151,7 +160,7 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBcache_all_platforms\fR (\fBBUNDLE_CACHE_ALL_PLATFORMS\fR): Cache gems for all platforms\.
 .
 .IP "\(bu" 4
-\fBcache_path\fR (\fBBUNDLE_CACHE_PATH\fR): The directory that bundler will place cached gems in when running \fBbundle package\fR, and that bundler will look in when installing gems\. Defaults to \fBvendor/bundle\fR\.
+\fBcache_path\fR (\fBBUNDLE_CACHE_PATH\fR): The directory that bundler will place cached gems in when running \fBbundle package\fR, and that bundler will look in when installing gems\. Defaults to \fBvendor/cache\fR\.
 .
 .IP "\(bu" 4
 \fBclean\fR (\fBBUNDLE_CLEAN\fR): Whether Bundler should run \fBbundle clean\fR automatically after \fBbundle install\fR\.
@@ -175,7 +184,7 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBdisable_local_branch_check\fR (\fBBUNDLE_DISABLE_LOCAL_BRANCH_CHECK\fR): Allow Bundler to use a local git override without a branch specified in the Gemfile\.
 .
 .IP "\(bu" 4
-\fBdisable_multisource\fR (\fBBUNDLE_DISABLE_MULTISOURCE\fR): When set, Gemfiles containing multiple sources will produce errors instead of warnings\. Use \fBbundle config \-\-delete disable_multisource\fR to unset\.
+\fBdisable_multisource\fR (\fBBUNDLE_DISABLE_MULTISOURCE\fR): When set, Gemfiles containing multiple sources will produce errors instead of warnings\. Use \fBbundle config unset disable_multisource\fR to unset\.
 .
 .IP "\(bu" 4
 \fBdisable_platform_warnings\fR (\fBBUNDLE_DISABLE_PLATFORM_WARNINGS\fR): Disable warnings during bundle install when a dependency is unused on the current platform\.
@@ -187,9 +196,6 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBdisable_version_check\fR (\fBBUNDLE_DISABLE_VERSION_CHECK\fR): Stop Bundler from checking if a newer Bundler version is available on rubygems\.org\.
 .
 .IP "\(bu" 4
-\fBerror_on_stderr\fR (\fBBUNDLE_ERROR_ON_STDERR\fR): Print Bundler errors to stderr\.
-.
-.IP "\(bu" 4
 \fBforce_ruby_platform\fR (\fBBUNDLE_FORCE_RUBY_PLATFORM\fR): Ignore the current machine\'s platform and install only \fBruby\fR platform gems\. As a result, gems with native extensions will be compiled from source\.
 .
 .IP "\(bu" 4
@@ -205,9 +211,6 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBglobal_gem_cache\fR (\fBBUNDLE_GLOBAL_GEM_CACHE\fR): Whether Bundler should cache all gems globally, rather than locally to the installing Ruby installation\.
 .
 .IP "\(bu" 4
-\fBglobal_path_appends_ruby_scope\fR (\fBBUNDLE_GLOBAL_PATH_APPENDS_RUBY_SCOPE\fR): Whether Bundler should append the Ruby scope (e\.g\. engine and ABI version) to a globally\-configured path\.
-.
-.IP "\(bu" 4
 \fBignore_messages\fR (\fBBUNDLE_IGNORE_MESSAGES\fR): When set, no post install messages will be printed\. To silence a single gem, use dot notation like \fBignore_messages\.httparty true\fR\.
 .
 .IP "\(bu" 4
@@ -217,12 +220,6 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBjobs\fR (\fBBUNDLE_JOBS\fR): The number of gems Bundler can install in parallel\. Defaults to 1\.
 .
 .IP "\(bu" 4
-\fBlist_command\fR (\fBBUNDLE_LIST_COMMAND\fR) Enable new list command feature
-.
-.IP "\(bu" 4
-\fBmajor_deprecations\fR (\fBBUNDLE_MAJOR_DEPRECATIONS\fR): Whether Bundler should print deprecation warnings for behavior that will be changed in the next major version\.
-.
-.IP "\(bu" 4
 \fBno_install\fR (\fBBUNDLE_NO_INSTALL\fR): Whether \fBbundle package\fR should skip installing gems\.
 .
 .IP "\(bu" 4
@@ -238,13 +235,13 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBpath\.system\fR (\fBBUNDLE_PATH__SYSTEM\fR): Whether Bundler will install gems into the default system path (\fBGem\.dir\fR)\.
 .
 .IP "\(bu" 4
-\fBpath_relative_to_cwd\fR (\fBPATH_RELATIVE_TO_CWD\fR) Makes \fB\-\-path\fR relative to the CWD instead of the \fBGemfile\fR\.
+\fBpath_relative_to_cwd\fR (\fBBUNDLE_PATH_RELATIVE_TO_CWD\fR) Makes \fB\-\-path\fR relative to the CWD instead of the \fBGemfile\fR\.
 .
 .IP "\(bu" 4
 \fBplugins\fR (\fBBUNDLE_PLUGINS\fR): Enable Bundler\'s experimental plugin system\.
 .
 .IP "\(bu" 4
-\fBprefer_gems_rb\fR (\fBBUNDLE_PREFER_GEMS_RB\fR) Prefer \fBgems\.rb\fR to \fBGemfile\fR when Bundler is searching for a Gemfile\.
+\fBprefer_patch\fR (BUNDLE_PREFER_PATCH): Prefer updating only to next patch version during updates\. Makes \fBbundle update\fR calls equivalent to \fBbundler update \-\-patch\fR\.
 .
 .IP "\(bu" 4
 \fBprint_only_version_number\fR (\fBBUNDLE_PRINT_ONLY_VERSION_NUMBER\fR) Print only version number from \fBbundler \-\-version\fR\.
@@ -262,6 +259,9 @@ The following is a list of all configuration keys and their purpose\. You can le
 \fBshebang\fR (\fBBUNDLE_SHEBANG\fR): The program name that should be invoked for generated binstubs\. Defaults to the ruby install name used to generate the binstub\.
 .
 .IP "\(bu" 4
+\fBsilence_deprecations\fR (\fBBUNDLE_SILENCE_DEPRECATIONS\fR): Whether Bundler should silence deprecation warnings for behavior that will be changed in the next major version\.
+.
+.IP "\(bu" 4
 \fBsilence_root_warning\fR (\fBBUNDLE_SILENCE_ROOT_WARNING\fR): Silence the warning Bundler prints when installing gems as root\.
 .
 .IP "\(bu" 4
@@ -318,7 +318,7 @@ Bundler also allows you to work against a git repository locally instead of usin
 .
 .nf
 
-bundle config local\.GEM_NAME /path/to/local/git/repository
+bundle config set local\.GEM_NAME /path/to/local/git/repository
 .
 .fi
 .
@@ -331,7 +331,7 @@ For example, in order to use a local Rack repository, a developer could call:
 .
 .nf
 
-bundle config local\.rack ~/Work/git/rack
+bundle config set local\.rack ~/Work/git/rack
 .
 .fi
 .
@@ -353,7 +353,7 @@ Bundler supports overriding gem sources with mirrors\. This allows you to config
 .
 .nf
 
-bundle config mirror\.SOURCE_URL MIRROR_URL
+bundle config set mirror\.SOURCE_URL MIRROR_URL
 .
 .fi
 .
@@ -366,7 +366,7 @@ For example, to use a mirror of rubygems\.org hosted at rubygems\-mirror\.org:
 .
 .nf
 
-bundle config mirror\.http://rubygems\.org http://rubygems\-mirror\.org
+bundle config set mirror\.http://rubygems\.org http://rubygems\-mirror\.org
 .
 .fi
 .
@@ -379,7 +379,7 @@ Each mirror also provides a fallback timeout setting\. If the mirror does not re
 .
 .nf
 
-bundle config mirror\.SOURCE_URL\.fallback_timeout TIMEOUT
+bundle config set mirror\.SOURCE_URL\.fallback_timeout TIMEOUT
 .
 .fi
 .
@@ -392,7 +392,7 @@ For example, to fall back to rubygems\.org after 3 seconds:
 .
 .nf
 
-bundle config mirror\.https://rubygems\.org\.fallback_timeout 3
+bundle config set mirror\.https://rubygems\.org\.fallback_timeout 3
 .
 .fi
 .
@@ -408,7 +408,7 @@ Bundler allows you to configure credentials for any gem source, which allows you
 .
 .nf
 
-bundle config SOURCE_HOSTNAME USERNAME:PASSWORD
+bundle config set SOURCE_HOSTNAME USERNAME:PASSWORD
 .
 .fi
 .
@@ -421,7 +421,7 @@ For example, to save the credentials of user \fBclaudette\fR for the gem source
 .
 .nf
 
-bundle config gems\.longerous\.com claudette:s00pers3krit
+bundle config set gems\.longerous\.com claudette:s00pers3krit
 .
 .fi
 .
@@ -447,7 +447,7 @@ For gems with a git source with HTTP(S) URL you can specify credentials like so:
 .
 .nf
 
-bundle config https://github\.com/bundler/bundler\.git username:password
+bundle config set https://github\.com/bundler/bundler\.git username:password
 .
 .fi
 .