bundler 1.17.3 → 2.4.19

data/{man/bundle-config.ronn → lib/bundler/man/bundle-config.1.ronn}

@@ -3,7 +3,10 @@ bundle-config(1) -- Set bundler configuration options
 
 ## SYNOPSIS
 
-`bundle config` [<name> [<value>]]
+`bundle config` list<br>
+`bundle config` [get] NAME<br>
+`bundle config` [set] NAME VALUE<br>
+`bundle config` unset NAME
 
 ## DESCRIPTION
 
@@ -11,44 +14,53 @@ This command allows you to interact with Bundler's configuration system.
 
 Bundler loads configuration settings in this order:
 
-1. Local config (`app/.bundle/config`)
+1. Local config (`<project_root>/.bundle/config` or `$BUNDLE_APP_CONFIG/config`)
 2. Environmental variables (`ENV`)
 3. Global config (`~/.bundle/config`)
 4. Bundler default config
 
-Executing `bundle config` with no parameters will print a list of all
-bundler configuration for the current bundle, and where that configuration
+Executing `bundle config list` will print a list of all bundler
+configuration for the current bundle, and where that configuration
 was set.
 
-Executing `bundle config <name>` will print the value of that configuration
+Executing `bundle config get <name>` will print the value of that configuration
 setting, and where it was set.
 
-Executing `bundle config <name> <value>` will set that configuration to the
-value specified for all bundles executed as the current user. The configuration
-will be stored in `~/.bundle/config`. If <name> already is set, <name> will be
-overridden and user will be warned.
+Executing `bundle config set <name> <value>` defaults to setting `local`
+configuration if executing from within a local application, otherwise it will
+set `global` configuration. See `--local` and `--global` options below.
 
-Executing `bundle config --global <name> <value>` works the same as above.
+Executing `bundle config set --local <name> <value>` will set that configuration
+in the directory for the local application. The configuration will be stored in
+`<project_root>/.bundle/config`. If `BUNDLE_APP_CONFIG` is set, the configuration
+will be stored in `$BUNDLE_APP_CONFIG/config`.
 
-Executing `bundle config --local <name> <value>` will set that configuration to
-the local application. The configuration will be stored in `app/.bundle/config`.
+Executing `bundle config set --global <name> <value>` will set that
+configuration to the value specified for all bundles executed as the current
+user. The configuration will be stored in `~/.bundle/config`. If <name> already
+is set, <name> will be overridden and user will be warned.
 
-Executing `bundle config --delete <name>` will delete the configuration in both
-local and global sources. Not compatible with --global or --local flag.
+Executing `bundle config unset <name>` will delete the configuration in both
+local and global sources.
+
+Executing `bundle config unset --global <name>` will delete the configuration
+only from the user configuration.
+
+Executing `bundle config unset --local <name>` will delete the configuration
+only from the local application.
 
 Executing bundle with the `BUNDLE_IGNORE_CONFIG` environment variable set will
 cause it to ignore all configuration.
 
-Executing `bundle config disable_multisource true` upgrades the warning about
-the Gemfile containing multiple primary sources to an error. Executing `bundle
-config --delete disable_multisource` downgrades this error to a warning.
-
 ## REMEMBERING OPTIONS
 
-Flags passed to `bundle install` or the Bundler runtime,
-such as `--path foo` or `--without production`, are not remembered between commands.
-If these options must be remembered,they must be set using `bundle config`
-(e.g., `bundle config path foo`).
+Flags passed to `bundle install` or the Bundler runtime, such as `--path foo` or
+`--without production`, are remembered between commands and saved to your local
+application's configuration (normally, `./.bundle/config`).
+
+However, this will be changed in bundler 3, so it's better not to rely on this
+behavior. If these options must be remembered, it's better to set them using
+`bundle config` (e.g., `bundle config set --local path foo`).
 
 The options that can be configured are:
 
@@ -65,6 +77,9 @@ The options that can be configured are:
    `production` use. Please check carefully if you want to have this option
    enabled in `development` or `test` environments.
 
+* `only`:
+   A space-separated list of groups to install only gems of the specified groups.
+
 * `path`:
    The location to install the specified gems to. This defaults to Rubygems'
    setting. Bundler shares this location with Rubygems, `gem install ...` will
@@ -76,7 +91,7 @@ The options that can be configured are:
    A space-separated list of groups referencing gems to skip during installation.
 
 * `with`:
-  A space-separated list of groups referencing gems to include during installation.
+  A space-separated list of **optional** groups referencing gems to include during installation.
 
 ## BUILD OPTIONS
 
@@ -92,7 +107,7 @@ pass configuration flags to `gem install` to specify where to find the
 Since the specific location of that executable can change from machine
 to machine, you can specify these flags on a per-machine basis.
 
-    bundle config build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
+    bundle config set --global build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
 
 After running this command, every time bundler needs to install the
 `mysql` gem, it will pass along the flags you specified.
@@ -122,9 +137,6 @@ the environment variable `BUNDLE_LOCAL__RACK`.
 The following is a list of all configuration keys and their purpose. You can
 learn more about their operation in [bundle install(1)](bundle-install.1.html).
 
-* `allow_bundler_dependency_conflicts` (`BUNDLE_ALLOW_BUNDLER_DEPENDENCY_CONFLICTS`):
-   Allow resolving to specifications that have dependencies on `bundler` that
-   are incompatible with the running Bundler version.
 * `allow_deployment_source_credential_changes` (`BUNDLE_ALLOW_DEPLOYMENT_SOURCE_CREDENTIAL_CHANGES`):
    When in deployment mode, allow changing the credentials to a gem's source.
    Ex: `https://some.host.com/gems/path/` -> `https://user_name:password@some.host.com/gems/path`
@@ -139,13 +151,14 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    Install executables from gems in the bundle to the specified directory.
    Defaults to `false`.
 * `cache_all` (`BUNDLE_CACHE_ALL`):
-   Cache all gems, including path and git gems.
+   Cache all gems, including path and git gems. This needs to be explicitly
+   configured on bundler 1 and bundler 2, but will be the default on bundler 3.
 * `cache_all_platforms` (`BUNDLE_CACHE_ALL_PLATFORMS`):
    Cache gems for all platforms.
 * `cache_path` (`BUNDLE_CACHE_PATH`):
    The directory that bundler will place cached gems in when running
    <code>bundle package</code>, and that bundler will look in when installing gems.
-   Defaults to `vendor/bundle`.
+   Defaults to `vendor/cache`.
 * `clean` (`BUNDLE_CLEAN`):
    Whether Bundler should run `bundle clean` automatically after
    `bundle install`.
@@ -166,19 +179,14 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
 * `disable_local_branch_check` (`BUNDLE_DISABLE_LOCAL_BRANCH_CHECK`):
    Allow Bundler to use a local git override without a branch specified in the
    Gemfile.
-* `disable_multisource` (`BUNDLE_DISABLE_MULTISOURCE`):
-   When set, Gemfiles containing multiple sources will produce errors
-   instead of warnings.
-   Use `bundle config --delete disable_multisource` to unset.
-* `disable_platform_warnings` (`BUNDLE_DISABLE_PLATFORM_WARNINGS`):
-   Disable warnings during bundle install when a dependency is unused on the current platform.
+* `disable_local_revision_check` (`BUNDLE_DISABLE_LOCAL_REVISION_CHECK`):
+   Allow Bundler to use a local git override without checking if the revision
+   present in the lockfile is present in the repository.
 * `disable_shared_gems` (`BUNDLE_DISABLE_SHARED_GEMS`):
    Stop Bundler from accessing gems installed to RubyGems' normal location.
 * `disable_version_check` (`BUNDLE_DISABLE_VERSION_CHECK`):
    Stop Bundler from checking if a newer Bundler version is available on
    rubygems.org.
-* `error_on_stderr` (`BUNDLE_ERROR_ON_STDERR`):
-   Print Bundler errors to stderr.
 * `force_ruby_platform` (`BUNDLE_FORCE_RUBY_PLATFORM`):
    Ignore the current machine's platform and install only `ruby` platform gems.
    As a result, gems with native extensions will be compiled from source.
@@ -186,6 +194,10 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    Disallow changes to the `Gemfile`. When the `Gemfile` is changed and the
    lockfile has not been updated, running Bundler commands will be blocked.
    Defaults to `true` when `--deployment` is used.
+* `gem.github_username` (`BUNDLE_GEM__GITHUB_USERNAME`):
+   Sets a GitHub username or organization to be used in `README` file when you
+   create a new gem via `bundle gem` command. It can be overridden by passing an
+   explicit `--github-username` flag to `bundle gem`.
 * `gem.push_key` (`BUNDLE_GEM__PUSH_KEY`):
    Sets the `--key` parameter for `gem push` when using the `rake release`
    command with a private gemstash server.
@@ -198,28 +210,22 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
 * `global_gem_cache` (`BUNDLE_GLOBAL_GEM_CACHE`):
    Whether Bundler should cache all gems globally, rather than locally to the
    installing Ruby installation.
-* `global_path_appends_ruby_scope` (`BUNDLE_GLOBAL_PATH_APPENDS_RUBY_SCOPE`):
-   Whether Bundler should append the Ruby scope (e.g. engine and ABI version)
-   to a globally-configured path.
-* `ignore_messages` (`BUNDLE_IGNORE_MESSAGES`): When set, no post install
-   messages will be printed. To silence a single gem, use dot notation like
-   `ignore_messages.httparty true`.
-* `init_gems_rb` (`BUNDLE_INIT_GEMS_RB`)
+* `ignore_funding_requests` (`BUNDLE_IGNORE_FUNDING_REQUESTS`):
+   When set, no funding requests will be printed.
+* `ignore_messages` (`BUNDLE_IGNORE_MESSAGES`):
+   When set, no post install messages will be printed. To silence a single gem,
+   use dot notation like `ignore_messages.httparty true`.
+* `init_gems_rb` (`BUNDLE_INIT_GEMS_RB`):
    Generate a `gems.rb` instead of a `Gemfile` when running `bundle init`.
 * `jobs` (`BUNDLE_JOBS`):
-   The number of gems Bundler can install in parallel. Defaults to 1.
-* `list_command` (`BUNDLE_LIST_COMMAND`)
-   Enable new list command feature
-* `major_deprecations` (`BUNDLE_MAJOR_DEPRECATIONS`):
-   Whether Bundler should print deprecation warnings for behavior that will
-   be changed in the next major version.
+   The number of gems Bundler can install in parallel. Defaults to the number of
+   available processors.
 * `no_install` (`BUNDLE_NO_INSTALL`):
    Whether `bundle package` should skip installing gems.
 * `no_prune` (`BUNDLE_NO_PRUNE`):
    Whether Bundler should leave outdated gems unpruned when caching.
-* `only_update_to_newer_versions` (`BUNDLE_ONLY_UPDATE_TO_NEWER_VERSIONS`):
-   During `bundle update`, only resolve to newer versions of the gems in the
-   lockfile.
+* `only` (`BUNDLE_ONLY`):
+   A space-separated list of groups to install only gems of the specified groups.
 * `path` (`BUNDLE_PATH`):
    The location on disk where all gems in your bundle will be located regardless
    of `$GEM_HOME` or `$GEM_PATH` values. Bundle gems not found in this location
@@ -227,13 +233,13 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    is used, defaults to vendor/bundle.
 * `path.system` (`BUNDLE_PATH__SYSTEM`):
    Whether Bundler will install gems into the default system path (`Gem.dir`).
-* `path_relative_to_cwd` (`PATH_RELATIVE_TO_CWD`)
+* `path_relative_to_cwd` (`BUNDLE_PATH_RELATIVE_TO_CWD`)
    Makes `--path` relative to the CWD instead of the `Gemfile`.
 * `plugins` (`BUNDLE_PLUGINS`):
    Enable Bundler's experimental plugin system.
-* `prefer_gems_rb` (`BUNDLE_PREFER_GEMS_RB`)
-   Prefer `gems.rb` to `Gemfile` when Bundler is searching for a Gemfile.
-* `print_only_version_number` (`BUNDLE_PRINT_ONLY_VERSION_NUMBER`)
+* `prefer_patch` (BUNDLE_PREFER_PATCH):
+   Prefer updating only to next patch version during updates. Makes `bundle update` calls equivalent to `bundler update --patch`.
+* `print_only_version_number` (`BUNDLE_PRINT_ONLY_VERSION_NUMBER`):
    Print only version number from `bundler --version`.
 * `redirect` (`BUNDLE_REDIRECT`):
    The number of redirects allowed for network requests. Defaults to `5`.
@@ -245,19 +251,11 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
 * `shebang` (`BUNDLE_SHEBANG`):
    The program name that should be invoked for generated binstubs. Defaults to
    the ruby install name used to generate the binstub.
+* `silence_deprecations` (`BUNDLE_SILENCE_DEPRECATIONS`):
+   Whether Bundler should silence deprecation warnings for behavior that will
+   be changed in the next major version.
 * `silence_root_warning` (`BUNDLE_SILENCE_ROOT_WARNING`):
    Silence the warning Bundler prints when installing gems as root.
-* `skip_default_git_sources` (`BUNDLE_SKIP_DEFAULT_GIT_SOURCES`):
-   Whether Bundler should skip adding default git source shortcuts to the
-   Gemfile DSL.
-* `specific_platform` (`BUNDLE_SPECIFIC_PLATFORM`):
-   Allow bundler to resolve for the specific running platform and store it in
-   the lockfile, instead of only using a generic platform.
-   A specific platform is the exact platform triple reported by
-   `Gem::Platform.local`, such as `x86_64-darwin-16` or `universal-java-1.8`.
-   On the other hand, generic platforms are those such as `ruby`, `mswin`, or
-   `java`. In this example, `x86_64-darwin-16` would map to `ruby` and
-   `universal-java-1.8` to `java`.
 * `ssl_ca_cert` (`BUNDLE_SSL_CA_CERT`):
    Path to a designated CA certificate file or folder containing multiple
    certificates for trusted CAs in PEM format.
@@ -267,17 +265,11 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
 * `ssl_verify_mode` (`BUNDLE_SSL_VERIFY_MODE`):
    The SSL verification mode Bundler uses when making HTTPS requests.
    Defaults to verify peer.
-* `suppress_install_using_messages` (`BUNDLE_SUPPRESS_INSTALL_USING_MESSAGES`):
-   Avoid printing `Using ...` messages during installation when the version of
-   a gem has not changed.
 * `system_bindir` (`BUNDLE_SYSTEM_BINDIR`):
    The location where RubyGems installs binstubs. Defaults to `Gem.bindir`.
 * `timeout` (`BUNDLE_TIMEOUT`):
    The seconds allowed before timing out for network requests. Defaults to `10`.
-* `unlock_source_unlocks_spec` (`BUNDLE_UNLOCK_SOURCE_UNLOCKS_SPEC`):
-   Whether running `bundle update --source NAME` unlocks a gem with the given
-   name. Defaults to `true`.
-* `update_requires_all_flag` (`BUNDLE_UPDATE_REQUIRES_ALL_FLAG`)
+* `update_requires_all_flag` (`BUNDLE_UPDATE_REQUIRES_ALL_FLAG`):
    Require passing `--all` to `bundle update` when everything should be updated,
    and disallow passing no options to `bundle update`.
 * `user_agent` (`BUNDLE_USER_AGENT`):
@@ -288,7 +280,7 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    A `:`-separated list of groups whose gems bundler should not install.
 
 In general, you should set these settings per-application by using the applicable
-flag to the [bundle install(1)](bundle-install.1.html) or [bundle package(1)](bundle-package.1.html) command.
+flag to the [bundle install(1)](bundle-install.1.html) or [bundle cache(1)](bundle-cache.1.html) command.
 
 You can set them globally either via environment variables or `bundle config`,
 whichever is preferable for your setup. If you use both, environment variables
@@ -300,11 +292,11 @@ Bundler also allows you to work against a git repository locally
 instead of using the remote version. This can be achieved by setting
 up a local override:
 
-    bundle config local.GEM_NAME /path/to/local/git/repository
+    bundle config set --local local.GEM_NAME /path/to/local/git/repository
 
 For example, in order to use a local Rack repository, a developer could call:
 
-    bundle config local.rack ~/Work/git/rack
+    bundle config set --local local.rack ~/Work/git/rack
 
 Now instead of checking out the remote git repository, the local
 override will be used. Similar to a path source, every time the local
@@ -334,21 +326,21 @@ Bundler supports overriding gem sources with mirrors. This allows you to
 configure rubygems.org as the gem source in your Gemfile while still using your
 mirror to fetch gems.
 
-    bundle config mirror.SOURCE_URL MIRROR_URL
+    bundle config set --global mirror.SOURCE_URL MIRROR_URL
 
-For example, to use a mirror of rubygems.org hosted at rubygems-mirror.org:
+For example, to use a mirror of https://rubygems.org hosted at https://example.org:
 
-    bundle config mirror.http://rubygems.org http://rubygems-mirror.org
+    bundle config set --global mirror.https://rubygems.org https://example.org
 
 Each mirror also provides a fallback timeout setting. If the mirror does not
 respond within the fallback timeout, Bundler will try to use the original
 server instead of the mirror.
 
-    bundle config mirror.SOURCE_URL.fallback_timeout TIMEOUT
+    bundle config set --global mirror.SOURCE_URL.fallback_timeout TIMEOUT
 
 For example, to fall back to rubygems.org after 3 seconds:
 
-    bundle config mirror.https://rubygems.org.fallback_timeout 3
+    bundle config set --global mirror.https://rubygems.org.fallback_timeout 3
 
 The default fallback timeout is 0.1 seconds, but the setting can currently
 only accept whole seconds (for example, 1, 15, or 30).
@@ -358,12 +350,12 @@ only accept whole seconds (for example, 1, 15, or 30).
 Bundler allows you to configure credentials for any gem source, which allows
 you to avoid putting secrets into your Gemfile.
 
-    bundle config SOURCE_HOSTNAME USERNAME:PASSWORD
+    bundle config set --global SOURCE_HOSTNAME USERNAME:PASSWORD
 
 For example, to save the credentials of user `claudette` for the gem source at
 `gems.longerous.com`, you would run:
 
-    bundle config gems.longerous.com claudette:s00pers3krit
+    bundle config set --global gems.longerous.com claudette:s00pers3krit
 
 Or you can set the credentials as an environment variable like this:
 
@@ -371,17 +363,34 @@ Or you can set the credentials as an environment variable like this:
 
 For gems with a git source with HTTP(S) URL you can specify credentials like so:
 
-    bundle config https://github.com/bundler/bundler.git username:password
+    bundle config set --global https://github.com/rubygems/rubygems.git username:password
 
 Or you can set the credentials as an environment variable like so:
 
     export BUNDLE_GITHUB__COM=username:password
 
-This is especially useful for private repositories on hosts such as Github,
+This is especially useful for private repositories on hosts such as GitHub,
 where you can use personal OAuth tokens:
 
     export BUNDLE_GITHUB__COM=abcd0123generatedtoken:x-oauth-basic
 
+Note that any configured credentials will be redacted by informative commands
+such as `bundle config list` or `bundle config get`, unless you use the
+`--parseable` flag. This is to avoid unintentionally leaking credentials when
+copy-pasting bundler output.
+
+Also note that to guarantee a sane mapping between valid environment variable
+names and valid host names, bundler makes the following transformations:
+
+* Any `-` characters in a host name are mapped to a triple dash (`___`) in the
+  corresponding environment variable.
+
+* Any `.` characters in a host name are mapped to a double dash (`__`) in the
+  corresponding environment variable.
+
+This means that if you have a gem server named `my.gem-host.com`, you'll need to
+use the `BUNDLE_MY__GEM___HOST__COM` variable to configure credentials for it
+through ENV.
 
 ## CONFIGURE BUNDLER DIRECTORIES
 
@@ -394,4 +403,3 @@ outlines the available environment variables and their default values
     BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
     BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
     BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin
-

data/lib/bundler/man/bundle-console.1

@@ -0,0 +1,53 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-CONSOLE" "1" "August 2023" "" ""
+.
+.SH "NAME"
+\fBbundle\-console\fR \- Deprecated way to open an IRB session with the bundle pre\-loaded
+.
+.SH "SYNOPSIS"
+\fBbundle console\fR [GROUP]
+.
+.SH "DESCRIPTION"
+Starts an interactive Ruby console session in the context of the current bundle\.
+.
+.P
+If no \fBGROUP\fR is specified, all gems in the \fBdefault\fR group in the Gemfile(5) \fIhttps://bundler\.io/man/gemfile\.5\.html\fR are preliminarily loaded\.
+.
+.P
+If \fBGROUP\fR is specified, all gems in the given group in the Gemfile in addition to the gems in \fBdefault\fR group are loaded\. Even if the given group does not exist in the Gemfile, IRB console starts without any warning or error\.
+.
+.P
+The environment variable \fBBUNDLE_CONSOLE\fR or \fBbundle config set console\fR can be used to change the shell from the following:
+.
+.IP "\(bu" 4
+\fBirb\fR (default)
+.
+.IP "\(bu" 4
+\fBpry\fR (https://github\.com/pry/pry)
+.
+.IP "\(bu" 4
+\fBripl\fR (https://github\.com/cldwalker/ripl)
+.
+.IP "" 0
+.
+.P
+\fBbundle console\fR uses irb by default\. An alternative Pry or Ripl can be used with \fBbundle console\fR by adjusting the \fBconsole\fR Bundler setting\. Also make sure that \fBpry\fR or \fBripl\fR is in your Gemfile\.
+.
+.SH "EXAMPLE"
+.
+.nf
+
+$ bundle config set console pry
+$ bundle console
+Resolving dependencies\.\.\.
+[1] pry(main)>
+.
+.fi
+.
+.SH "NOTES"
+This command was deprecated in Bundler 2\.1 and will be removed in 3\.0\. Use \fBbin/console\fR script, which can be generated by \fBbundle gem <NAME>\fR\.
+.
+.SH "SEE ALSO"
+Gemfile(5) \fIhttps://bundler\.io/man/gemfile\.5\.html\fR

data/lib/bundler/man/bundle-console.1.ronn

@@ -0,0 +1,44 @@
+bundle-console(1) -- Deprecated way to open an IRB session with the bundle pre-loaded
+=====================================================================================
+
+## SYNOPSIS
+
+`bundle console` [GROUP]
+
+## DESCRIPTION
+
+Starts an interactive Ruby console session in the context of the current bundle.
+
+If no `GROUP` is specified, all gems in the `default` group in the [Gemfile(5)](https://bundler.io/man/gemfile.5.html) are
+preliminarily loaded.
+
+If `GROUP` is specified, all gems in the given group in the Gemfile in addition
+to the gems in `default` group are loaded. Even if the given group does not
+exist in the Gemfile, IRB console starts without any warning or error.
+
+The environment variable `BUNDLE_CONSOLE` or `bundle config set console` can be used to change
+the shell from the following:
+
+* `irb` (default)
+* `pry` (https://github.com/pry/pry)
+* `ripl` (https://github.com/cldwalker/ripl)
+
+`bundle console` uses irb by default. An alternative Pry or Ripl can be used with
+`bundle console` by adjusting the `console` Bundler setting. Also make sure that
+`pry` or `ripl` is in your Gemfile.
+
+## EXAMPLE
+
+    $ bundle config set console pry
+    $ bundle console
+    Resolving dependencies...
+    [1] pry(main)>
+
+## NOTES
+
+This command was deprecated in Bundler 2.1 and will be removed in 3.0.
+Use `bin/console` script, which can be generated by `bundle gem <NAME>`.
+
+## SEE ALSO
+
+[Gemfile(5)](https://bundler.io/man/gemfile.5.html)

data/{man → lib/bundler/man}/bundle-doctor.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-DOCTOR" "1" "November 2018" "" ""
+.TH "BUNDLE\-DOCTOR" "1" "August 2023" "" ""
 .
 .SH "NAME"
 \fBbundle\-doctor\fR \- Checks the bundle for common problems

data/{man → lib/bundler/man}/bundle-exec.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-EXEC" "1" "November 2018" "" ""
+.TH "BUNDLE\-EXEC" "1" "August 2023" "" ""
 .
 .SH "NAME"
 \fBbundle\-exec\fR \- Execute a command in the context of the bundle
@@ -74,13 +74,13 @@ Finally, \fBbundle exec\fR also implicitly modifies \fBGemfile\.lock\fR if the l
 By default, when attempting to \fBbundle exec\fR to a file with a ruby shebang, Bundler will \fBKernel\.load\fR that file instead of using \fBKernel\.exec\fR\. For the vast majority of cases, this is a performance improvement\. In a rare few cases, this could cause some subtle side\-effects (such as dependence on the exact contents of \fB$0\fR or \fB__FILE__\fR) and the optimization can be disabled by enabling the \fBdisable_exec_load\fR setting\.
 .
 .SS "Shelling out"
-Any Ruby code that opens a subshell (like \fBsystem\fR, backticks, or \fB%x{}\fR) will automatically use the current Bundler environment\. If you need to shell out to a Ruby command that is not part of your current bundle, use the \fBwith_clean_env\fR method with a block\. Any subshells created inside the block will be given the environment present before Bundler was activated\. For example, Homebrew commands run Ruby, but don\'t work inside a bundle:
+Any Ruby code that opens a subshell (like \fBsystem\fR, backticks, or \fB%x{}\fR) will automatically use the current Bundler environment\. If you need to shell out to a Ruby command that is not part of your current bundle, use the \fBwith_unbundled_env\fR method with a block\. Any subshells created inside the block will be given the environment present before Bundler was activated\. For example, Homebrew commands run Ruby, but don\'t work inside a bundle:
 .
 .IP "" 4
 .
 .nf
 
-Bundler\.with_clean_env do
+Bundler\.with_unbundled_env do
   `brew install wget`
 end
 .
@@ -89,13 +89,13 @@ end
 .IP "" 0
 .
 .P
-Using \fBwith_clean_env\fR is also necessary if you are shelling out to a different bundle\. Any Bundler commands run in a subshell will inherit the current Gemfile, so commands that need to run in the context of a different bundle also need to use \fBwith_clean_env\fR\.
+Using \fBwith_unbundled_env\fR is also necessary if you are shelling out to a different bundle\. Any Bundler commands run in a subshell will inherit the current Gemfile, so commands that need to run in the context of a different bundle also need to use \fBwith_unbundled_env\fR\.
 .
 .IP "" 4
 .
 .nf
 
-Bundler\.with_clean_env do
+Bundler\.with_unbundled_env do
   Dir\.chdir "/other/bundler/project" do
     `bundle exec \./script`
   end
@@ -155,7 +155,7 @@ You can find a list of all the gems containing gem plugins by running
 .
 .nf
 
-ruby \-rubygems \-e "puts Gem\.find_files(\'rubygems_plugin\.rb\')"
+ruby \-e "puts Gem\.find_files(\'rubygems_plugin\.rb\')"
 .
 .fi
 .

data/{man/bundle-exec.ronn → lib/bundler/man/bundle-exec.1.ronn}

@@ -84,20 +84,20 @@ the `disable_exec_load` setting.
 Any Ruby code that opens a subshell (like `system`, backticks, or `%x{}`) will
 automatically use the current Bundler environment. If you need to shell out to
 a Ruby command that is not part of your current bundle, use the
-`with_clean_env` method with a block. Any subshells created inside the block
+`with_unbundled_env` method with a block. Any subshells created inside the block
 will be given the environment present before Bundler was activated. For
 example, Homebrew commands run Ruby, but don't work inside a bundle:
 
-    Bundler.with_clean_env do
+    Bundler.with_unbundled_env do
       `brew install wget`
     end
 
-Using `with_clean_env` is also necessary if you are shelling out to a different
+Using `with_unbundled_env` is also necessary if you are shelling out to a different
 bundle. Any Bundler commands run in a subshell will inherit the current
 Gemfile, so commands that need to run in the context of a different bundle also
-need to use `with_clean_env`.
+need to use `with_unbundled_env`.
 
-    Bundler.with_clean_env do
+    Bundler.with_unbundled_env do
       Dir.chdir "/other/bundler/project" do
         `bundle exec ./script`
       end
@@ -145,7 +145,7 @@ their plugins.
 You can find a list of all the gems containing gem plugins
 by running
 
-    ruby -rubygems -e "puts Gem.find_files('rubygems_plugin.rb')"
+    ruby -e "puts Gem.find_files('rubygems_plugin.rb')"
 
 At the very least, you should remove all but the newest
 version of each gem plugin, and also remove all gem plugins