bundler 1.15.2 → 1.17.3

data/man/bundle-config.ronn

@@ -7,10 +7,14 @@ bundle-config(1) -- Set bundler configuration options
 
 ## DESCRIPTION
 
-This command allows you to interact with bundler's configuration system.
-Bundler retrieves its configuration from the local application (`app/.bundle/config`),
-environment variables, and the user's home directory (`~/.bundle/config`),
-in that order of priority.
+This command allows you to interact with Bundler's configuration system.
+
+Bundler loads configuration settings in this order:
+
+1. Local config (`app/.bundle/config`)
+2. Environmental variables (`ENV`)
+3. Global config (`~/.bundle/config`)
+4. Bundler default config
 
 Executing `bundle config` with no parameters will print a list of all
 bundler configuration for the current bundle, and where that configuration
@@ -49,31 +53,34 @@ If these options must be remembered,they must be set using `bundle config`
 The options that can be configured are:
 
 * `bin`:
-  Creates a directory (defaults to `~/bin`) and place any executables from the
-  gem there. These executables run in Bundler's context. If used, you might add
-  this directory to your environment's `PATH` variable. For instance, if the
-  `rails` gem comes with a `rails` executable, this flag will create a
-  `bin/rails` executable that ensures that all referred dependencies will be
-  resolved using the bundled gems.
+   Creates a directory (defaults to `~/bin`) and place any executables from the
+   gem there. These executables run in Bundler's context. If used, you might add
+   this directory to your environment's `PATH` variable. For instance, if the
+   `rails` gem comes with a `rails` executable, this flag will create a
+   `bin/rails` executable that ensures that all referred dependencies will be
+   resolved using the bundled gems.
 
 * `deployment`:
-  In deployment mode, Bundler will 'roll-out' the bundle for
-  `production` use. Please check carefully if you want to have this option
-  enabled in `development` or `test` environments.
+   In deployment mode, Bundler will 'roll-out' the bundle for
+   `production` use. Please check carefully if you want to have this option
+   enabled in `development` or `test` environments.
 
 * `path`:
-  The location to install the specified gems to. This defaults to Rubygems'
-  setting. Bundler shares this location with Rubygems, `gem install ...` will
-  have gem installed there, too. Therefore, gems installed without a
-  `--path ...` setting will show up by calling `gem list`. Accordingly, gems
-  installed to other locations will not get listed.
+   The location to install the specified gems to. This defaults to Rubygems'
+   setting. Bundler shares this location with Rubygems, `gem install ...` will
+   have gem installed there, too. Therefore, gems installed without a
+   `--path ...` setting will show up by calling `gem list`. Accordingly, gems
+   installed to other locations will not get listed.
 
 * `without`:
-  A space-separated list of groups referencing gems to skip during installation.
+   A space-separated list of groups referencing gems to skip during installation.
+
+* `with`:
+  A space-separated list of groups referencing gems to include during installation.
 
 ## BUILD OPTIONS
 
-You can use `bundle config` to give bundler the flags to pass to the gem
+You can use `bundle config` to give Bundler the flags to pass to the gem
 installer every time bundler tries to install a particular gem.
 
 A very common example, the `mysql` gem, requires Snow Leopard users to
@@ -95,12 +102,12 @@ After running this command, every time bundler needs to install the
 Configuration keys in bundler have two forms: the canonical form and the
 environment variable form.
 
-For instance, passing the `--without` flag to [bundle install(1)][bundle-install]
+For instance, passing the `--without` flag to [bundle install(1)](bundle-install.1.html)
 prevents Bundler from installing certain groups specified in the Gemfile(5). Bundler
 persists this value in `app/.bundle/config` so that calls to `Bundler.setup`
 do not try to find gems from the `Gemfile` that you didn't install. Additionally,
-subsequent calls to [bundle install(1)][bundle-install] remember this setting and skip those
-groups.
+subsequent calls to [bundle install(1)](bundle-install.1.html) remember this setting
+and skip those groups.
 
 The canonical form of this configuration is `"without"`. To convert the canonical
 form to the environment variable form, capitalize it, and prepend `BUNDLE_`. The
@@ -113,88 +120,96 @@ the environment variable `BUNDLE_LOCAL__RACK`.
 ## LIST OF AVAILABLE KEYS
 
 The following is a list of all configuration keys and their purpose. You can
-learn more about their operation in [bundle install(1)][bundle-install].
-
-* `path` (`BUNDLE_PATH`):
-  The location on disk where all gems in your bundle will be located regardless
-  of `$GEM_HOME` or `$GEM_PATH` values. Bundle gems not found in this location
-  will be installed by `bundle install`. Defaults to `Gem.dir`. When --deployment is
-  used, defaults to vendor/bundle.
-* `frozen` (`BUNDLE_FROZEN`):
-  Disallow changes to the `Gemfile`. Defaults to `true` when `--deployment`
-  is used.
-* `without` (`BUNDLE_WITHOUT`):
-  A `:`-separated list of groups whose gems bundler should not install
-* `bin` (`BUNDLE_BIN`):
-  Install executables from gems in the bundle to the specified directory.
-  Defaults to `false`.
-* `gemfile` (`BUNDLE_GEMFILE`):
-  The name of the file that bundler should use as the `Gemfile`. This location
-  of this file also sets the root of the project, which is used to resolve
-  relative paths in the `Gemfile`, among other things. By default, bundler
-  will search up from the current working directory until it finds a
-  `Gemfile`.
-* `ssl_ca_cert` (`BUNDLE_SSL_CA_CERT`):
-  Path to a designated CA certificate file or folder containing multiple
-  certificates for trusted CAs in PEM format.
-* `ssl_client_cert` (`BUNDLE_SSL_CLIENT_CERT`):
-  Path to a designated file containing a X.509 client certificate
-  and key in PEM format.
-* `cache_path` (`BUNDLE_CACHE_PATH`): The directory that bundler will place
-  cached gems in when running <code>bundle package</code>, and that bundler
-  will look in when installing gems. Defaults to `vendor/bundle`.
-* `disable_multisource` (`BUNDLE_DISABLE_MULTISOURCE`): When set, Gemfiles
-  containing multiple sources will produce errors instead of warnings. Use
-  `bundle config --delete disable_multisource` to unset.
-* `ignore_messages` (`BUNDLE_IGNORE_MESSAGES`): When set, no post install
-  messages will be printed. To silence a single gem, use dot notation like
-  `ignore_messages.httparty true`.
-* `retry` (`BUNDLE_RETRY`):
-   The number of times to retry failed network requests. Defaults to `3`.
-* `redirect` (`BUNDLE_REDIRECT`):
-   The number of redirects allowed for network requests. Defaults to `5`.
-* `timeout` (`BUNDLE_TIMEOUT`):
-   The seconds allowed before timing out for network requests. Defaults to `10`.
-* `force_ruby_platform` (`BUNDLE_FORCE_RUBY_PLATFORM`):
-   Ignore the current machine's platform and install only `ruby` platform gems.
-   As a result, gems with native extensions will be compiled from source.
-* `specific_platform` (`BUNDLE_SPECIFIC_PLATFORM`):
-   Allow bundler to resolve for the specific running platform and store it in
-   the lockfile, instead of only using a generic platform.
-   A specific platform is the exact platform triple reported by
-   `Gem::Platform.local`, such as `x86_64-darwin-16` or `universal-java-1.8`.
-   On the other hand, generic platforms are those such as `ruby`, `mswin`, or
-   `java`. In this example, `x86_64-darwin-16` would map to `ruby` and
-   `universal-java-1.8` to `java`.
-* `disable_checksum_validation` (`BUNDLE_DISABLE_CHECKSUM_VALIDATION`):
-   Allow installing gems even if they do not match the checksum provided by
-   RubyGems.
-* `disable_version_check` (`BUNDLE_DISABLE_VERSION_CHECK`):
-   Stop Bundler from checking if a newer Bundler version is available on
-   rubygems.org.
+learn more about their operation in [bundle install(1)](bundle-install.1.html).
+
+* `allow_bundler_dependency_conflicts` (`BUNDLE_ALLOW_BUNDLER_DEPENDENCY_CONFLICTS`):
+   Allow resolving to specifications that have dependencies on `bundler` that
+   are incompatible with the running Bundler version.
+* `allow_deployment_source_credential_changes` (`BUNDLE_ALLOW_DEPLOYMENT_SOURCE_CREDENTIAL_CHANGES`):
+   When in deployment mode, allow changing the credentials to a gem's source.
+   Ex: `https://some.host.com/gems/path/` -> `https://user_name:password@some.host.com/gems/path`
 * `allow_offline_install` (`BUNDLE_ALLOW_OFFLINE_INSTALL`):
    Allow Bundler to use cached data when installing without network access.
+* `auto_clean_without_path` (`BUNDLE_AUTO_CLEAN_WITHOUT_PATH`):
+   Automatically run `bundle clean` after installing when an explicit `path`
+   has not been set and Bundler is not installing into the system gems.
 * `auto_install` (`BUNDLE_AUTO_INSTALL`):
    Automatically run `bundle install` when gems are missing.
-* `cache_all_platforms` (`BUNDLE_CACHE_ALL_PLATFORMS`):
-   Cache gems for all platforms.
+* `bin` (`BUNDLE_BIN`):
+   Install executables from gems in the bundle to the specified directory.
+   Defaults to `false`.
 * `cache_all` (`BUNDLE_CACHE_ALL`):
    Cache all gems, including path and git gems.
+* `cache_all_platforms` (`BUNDLE_CACHE_ALL_PLATFORMS`):
+   Cache gems for all platforms.
+* `cache_path` (`BUNDLE_CACHE_PATH`):
+   The directory that bundler will place cached gems in when running
+   <code>bundle package</code>, and that bundler will look in when installing gems.
+   Defaults to `vendor/bundle`.
 * `clean` (`BUNDLE_CLEAN`):
    Whether Bundler should run `bundle clean` automatically after
    `bundle install`.
 * `console` (`BUNDLE_CONSOLE`):
    The console that `bundle console` starts. Defaults to `irb`.
+* `default_install_uses_path` (`BUNDLE_DEFAULT_INSTALL_USES_PATH`):
+   Whether a `bundle install` without an explicit `--path` argument defaults
+   to installing gems in `.bundle`.
+* `deployment` (`BUNDLE_DEPLOYMENT`):
+   Disallow changes to the `Gemfile`. When the `Gemfile` is changed and the
+   lockfile has not been updated, running Bundler commands will be blocked.
+* `disable_checksum_validation` (`BUNDLE_DISABLE_CHECKSUM_VALIDATION`):
+   Allow installing gems even if they do not match the checksum provided by
+   RubyGems.
 * `disable_exec_load` (`BUNDLE_DISABLE_EXEC_LOAD`):
    Stop Bundler from using `load` to launch an executable in-process in
    `bundle exec`.
 * `disable_local_branch_check` (`BUNDLE_DISABLE_LOCAL_BRANCH_CHECK`):
    Allow Bundler to use a local git override without a branch specified in the
    Gemfile.
+* `disable_multisource` (`BUNDLE_DISABLE_MULTISOURCE`):
+   When set, Gemfiles containing multiple sources will produce errors
+   instead of warnings.
+   Use `bundle config --delete disable_multisource` to unset.
+* `disable_platform_warnings` (`BUNDLE_DISABLE_PLATFORM_WARNINGS`):
+   Disable warnings during bundle install when a dependency is unused on the current platform.
 * `disable_shared_gems` (`BUNDLE_DISABLE_SHARED_GEMS`):
    Stop Bundler from accessing gems installed to RubyGems' normal location.
+* `disable_version_check` (`BUNDLE_DISABLE_VERSION_CHECK`):
+   Stop Bundler from checking if a newer Bundler version is available on
+   rubygems.org.
+* `error_on_stderr` (`BUNDLE_ERROR_ON_STDERR`):
+   Print Bundler errors to stderr.
+* `force_ruby_platform` (`BUNDLE_FORCE_RUBY_PLATFORM`):
+   Ignore the current machine's platform and install only `ruby` platform gems.
+   As a result, gems with native extensions will be compiled from source.
+* `frozen` (`BUNDLE_FROZEN`):
+   Disallow changes to the `Gemfile`. When the `Gemfile` is changed and the
+   lockfile has not been updated, running Bundler commands will be blocked.
+   Defaults to `true` when `--deployment` is used.
+* `gem.push_key` (`BUNDLE_GEM__PUSH_KEY`):
+   Sets the `--key` parameter for `gem push` when using the `rake release`
+   command with a private gemstash server.
+* `gemfile` (`BUNDLE_GEMFILE`):
+   The name of the file that bundler should use as the `Gemfile`. This location
+   of this file also sets the root of the project, which is used to resolve
+   relative paths in the `Gemfile`, among other things. By default, bundler
+   will search up from the current working directory until it finds a
+   `Gemfile`.
+* `global_gem_cache` (`BUNDLE_GLOBAL_GEM_CACHE`):
+   Whether Bundler should cache all gems globally, rather than locally to the
+   installing Ruby installation.
+* `global_path_appends_ruby_scope` (`BUNDLE_GLOBAL_PATH_APPENDS_RUBY_SCOPE`):
+   Whether Bundler should append the Ruby scope (e.g. engine and ABI version)
+   to a globally-configured path.
+* `ignore_messages` (`BUNDLE_IGNORE_MESSAGES`): When set, no post install
+   messages will be printed. To silence a single gem, use dot notation like
+   `ignore_messages.httparty true`.
+* `init_gems_rb` (`BUNDLE_INIT_GEMS_RB`)
+   Generate a `gems.rb` instead of a `Gemfile` when running `bundle init`.
 * `jobs` (`BUNDLE_JOBS`):
    The number of gems Bundler can install in parallel. Defaults to 1.
+* `list_command` (`BUNDLE_LIST_COMMAND`)
+   Enable new list command feature
 * `major_deprecations` (`BUNDLE_MAJOR_DEPRECATIONS`):
    Whether Bundler should print deprecation warnings for behavior that will
    be changed in the next major version.
@@ -205,26 +220,75 @@ learn more about their operation in [bundle install(1)][bundle-install].
 * `only_update_to_newer_versions` (`BUNDLE_ONLY_UPDATE_TO_NEWER_VERSIONS`):
    During `bundle update`, only resolve to newer versions of the gems in the
    lockfile.
+* `path` (`BUNDLE_PATH`):
+   The location on disk where all gems in your bundle will be located regardless
+   of `$GEM_HOME` or `$GEM_PATH` values. Bundle gems not found in this location
+   will be installed by `bundle install`. Defaults to `Gem.dir`. When --deployment
+   is used, defaults to vendor/bundle.
+* `path.system` (`BUNDLE_PATH__SYSTEM`):
+   Whether Bundler will install gems into the default system path (`Gem.dir`).
+* `path_relative_to_cwd` (`PATH_RELATIVE_TO_CWD`)
+   Makes `--path` relative to the CWD instead of the `Gemfile`.
 * `plugins` (`BUNDLE_PLUGINS`):
    Enable Bundler's experimental plugin system.
+* `prefer_gems_rb` (`BUNDLE_PREFER_GEMS_RB`)
+   Prefer `gems.rb` to `Gemfile` when Bundler is searching for a Gemfile.
+* `print_only_version_number` (`BUNDLE_PRINT_ONLY_VERSION_NUMBER`)
+   Print only version number from `bundler --version`.
+* `redirect` (`BUNDLE_REDIRECT`):
+   The number of redirects allowed for network requests. Defaults to `5`.
+* `retry` (`BUNDLE_RETRY`):
+   The number of times to retry failed network requests. Defaults to `3`.
+* `setup_makes_kernel_gem_public` (`BUNDLE_SETUP_MAKES_KERNEL_GEM_PUBLIC`):
+   Have `Bundler.setup` make the `Kernel#gem` method public, even though
+   RubyGems declares it as private.
 * `shebang` (`BUNDLE_SHEBANG`):
    The program name that should be invoked for generated binstubs. Defaults to
    the ruby install name used to generate the binstub.
 * `silence_root_warning` (`BUNDLE_SILENCE_ROOT_WARNING`):
    Silence the warning Bundler prints when installing gems as root.
+* `skip_default_git_sources` (`BUNDLE_SKIP_DEFAULT_GIT_SOURCES`):
+   Whether Bundler should skip adding default git source shortcuts to the
+   Gemfile DSL.
+* `specific_platform` (`BUNDLE_SPECIFIC_PLATFORM`):
+   Allow bundler to resolve for the specific running platform and store it in
+   the lockfile, instead of only using a generic platform.
+   A specific platform is the exact platform triple reported by
+   `Gem::Platform.local`, such as `x86_64-darwin-16` or `universal-java-1.8`.
+   On the other hand, generic platforms are those such as `ruby`, `mswin`, or
+   `java`. In this example, `x86_64-darwin-16` would map to `ruby` and
+   `universal-java-1.8` to `java`.
+* `ssl_ca_cert` (`BUNDLE_SSL_CA_CERT`):
+   Path to a designated CA certificate file or folder containing multiple
+   certificates for trusted CAs in PEM format.
+* `ssl_client_cert` (`BUNDLE_SSL_CLIENT_CERT`):
+   Path to a designated file containing a X.509 client certificate
+   and key in PEM format.
 * `ssl_verify_mode` (`BUNDLE_SSL_VERIFY_MODE`):
    The SSL verification mode Bundler uses when making HTTPS requests.
    Defaults to verify peer.
+* `suppress_install_using_messages` (`BUNDLE_SUPPRESS_INSTALL_USING_MESSAGES`):
+   Avoid printing `Using ...` messages during installation when the version of
+   a gem has not changed.
 * `system_bindir` (`BUNDLE_SYSTEM_BINDIR`):
    The location where RubyGems installs binstubs. Defaults to `Gem.bindir`.
+* `timeout` (`BUNDLE_TIMEOUT`):
+   The seconds allowed before timing out for network requests. Defaults to `10`.
+* `unlock_source_unlocks_spec` (`BUNDLE_UNLOCK_SOURCE_UNLOCKS_SPEC`):
+   Whether running `bundle update --source NAME` unlocks a gem with the given
+   name. Defaults to `true`.
+* `update_requires_all_flag` (`BUNDLE_UPDATE_REQUIRES_ALL_FLAG`)
+   Require passing `--all` to `bundle update` when everything should be updated,
+   and disallow passing no options to `bundle update`.
 * `user_agent` (`BUNDLE_USER_AGENT`):
    The custom user agent fragment Bundler includes in API requests.
-* `gem.push_key` (`BUNDLE_GEM__PUSH_KEY`):
-   Sets the `--key` paramter for `gem push` when using the `rake release`
-   command with a private gemstash server.
+* `with` (`BUNDLE_WITH`):
+   A `:`-separated list of groups whose gems bundler should install.
+* `without` (`BUNDLE_WITHOUT`):
+   A `:`-separated list of groups whose gems bundler should not install.
 
 In general, you should set these settings per-application by using the applicable
-flag to the [bundle install(1)][bundle-install] or [bundle package(1)][bundle-package] command.
+flag to the [bundle install(1)](bundle-install.1.html) or [bundle package(1)](bundle-package.1.html) command.
 
 You can set them globally either via environment variables or `bundle config`,
 whichever is preferable for your setup. If you use both, environment variables
@@ -250,6 +314,7 @@ revision in the `Gemfile.lock` to the local git repo revision. This
 requires the same attention as git submodules. Before pushing to
 the remote, you need to ensure the local override was pushed, otherwise
 you may point to a commit that only exists in your local machine.
+You'll also need to CGI escape your usernames and passwords as well.
 
 Bundler does many checks to ensure a developer won't work with
 invalid references. Particularly, we force a developer to specify
@@ -316,3 +381,17 @@ This is especially useful for private repositories on hosts such as Github,
 where you can use personal OAuth tokens:
 
     export BUNDLE_GITHUB__COM=abcd0123generatedtoken:x-oauth-basic
+
+
+## CONFIGURE BUNDLER DIRECTORIES
+
+Bundler's home, config, cache and plugin directories are able to be configured
+through environment variables. The default location for Bundler's home directory is
+`~/.bundle`, which all directories inherit from by default. The following
+outlines the available environment variables and their default values
+
+    BUNDLE_USER_HOME : $HOME/.bundle
+    BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
+    BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
+    BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin
+

data/man/bundle-doctor.1

@@ -0,0 +1,44 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-DOCTOR" "1" "November 2018" "" ""
+.
+.SH "NAME"
+\fBbundle\-doctor\fR \- Checks the bundle for common problems
+.
+.SH "SYNOPSIS"
+\fBbundle doctor\fR [\-\-quiet] [\-\-gemfile=GEMFILE]
+.
+.SH "DESCRIPTION"
+Checks your Gemfile and gem environment for common problems\. If issues are detected, Bundler prints them and exits status 1\. Otherwise, Bundler prints a success message and exits status 0\.
+.
+.P
+Examples of common problems caught by bundle\-doctor include:
+.
+.IP "\(bu" 4
+Invalid Bundler settings
+.
+.IP "\(bu" 4
+Mismatched Ruby versions
+.
+.IP "\(bu" 4
+Mismatched platforms
+.
+.IP "\(bu" 4
+Uninstalled gems
+.
+.IP "\(bu" 4
+Missing dependencies
+.
+.IP "" 0
+.
+.SH "OPTIONS"
+.
+.TP
+\fB\-\-quiet\fR
+Only output warnings and errors\.
+.
+.TP
+\fB\-\-gemfile=<gemfile>\fR
+The location of the Gemfile(5) which Bundler should use\. This defaults to a Gemfile(5) in the current working directory\. In general, Bundler will assume that the location of the Gemfile(5) is also the project\'s root and will try to find \fBGemfile\.lock\fR and \fBvendor/cache\fR relative to this location\.
+

data/man/bundle-doctor.1.txt

@@ -0,0 +1,44 @@
+BUNDLE-DOCTOR(1)					      BUNDLE-DOCTOR(1)
+
+
+
+NAME
+       bundle-doctor - Checks the bundle for common problems
+
+SYNOPSIS
+       bundle doctor [--quiet] [--gemfile=GEMFILE]
+
+DESCRIPTION
+       Checks  your Gemfile and gem environment for common problems. If issues
+       are detected, Bundler  prints  them  and  exits	status	1.  Otherwise,
+       Bundler prints a success message and exits status 0.
+
+       Examples of common problems caught by bundle-doctor include:
+
+       o   Invalid Bundler settings
+
+       o   Mismatched Ruby versions
+
+       o   Mismatched platforms
+
+       o   Uninstalled gems
+
+       o   Missing dependencies
+
+
+
+OPTIONS
+       --quiet
+	      Only output warnings and errors.
+
+       --gemfile=<gemfile>
+	      The  location  of  the Gemfile(5) which Bundler should use. This
+	      defaults to a Gemfile(5) in the current  working	directory.  In
+	      general, Bundler will assume that the location of the Gemfile(5)
+	      is also the project's root and will try to find Gemfile.lock and
+	      vendor/cache relative to this location.
+
+
+
+
+				 November 2018		      BUNDLE-DOCTOR(1)

data/man/bundle-doctor.ronn

@@ -0,0 +1,33 @@
+bundle-doctor(1) -- Checks the bundle for common problems
+=========================================================
+
+## SYNOPSIS
+
+`bundle doctor` [--quiet]
+                [--gemfile=GEMFILE]
+
+## DESCRIPTION
+
+Checks your Gemfile and gem environment for common problems. If issues
+are detected, Bundler prints them and exits status 1. Otherwise,
+Bundler prints a success message and exits status 0.
+
+Examples of common problems caught by bundle-doctor include:
+
+* Invalid Bundler settings
+* Mismatched Ruby versions
+* Mismatched platforms
+* Uninstalled gems
+* Missing dependencies
+
+## OPTIONS
+
+* `--quiet`:
+  Only output warnings and errors.
+
+* `--gemfile=<gemfile>`:
+  The location of the Gemfile(5) which Bundler should use. This defaults
+  to a Gemfile(5) in the current working directory. In general, Bundler
+  will assume that the location of the Gemfile(5) is also the project's
+  root and will try to find `Gemfile.lock` and `vendor/cache` relative
+  to this location.

data/man/bundle-exec.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "BUNDLE\-EXEC" "1" "June 2017" "" ""
+.TH "BUNDLE\-EXEC" "1" "November 2018" "" ""
 .
 .SH "NAME"
 \fBbundle\-exec\fR \- Execute a command in the context of the bundle
@@ -10,10 +10,10 @@
 \fBbundle exec\fR [\-\-keep\-file\-descriptors] \fIcommand\fR
 .
 .SH "DESCRIPTION"
-This command executes the command, making all gems specified in the \fBGemfile(5)\fR available to \fBrequire\fR in Ruby programs\.
+This command executes the command, making all gems specified in the [\fBGemfile(5)\fR][Gemfile(5)] available to \fBrequire\fR in Ruby programs\.
 .
 .P
-Essentially, if you would normally have run something like \fBrspec spec/my_spec\.rb\fR, and you want to use the gems specified in the \fBGemfile(5)\fR and installed via bundle install(1) \fIbundle\-install\.1\.html\fR, you should run \fBbundle exec rspec spec/my_spec\.rb\fR\.
+Essentially, if you would normally have run something like \fBrspec spec/my_spec\.rb\fR, and you want to use the gems specified in the [\fBGemfile(5)\fR][Gemfile(5)] and installed via bundle install(1) \fIbundle\-install\.1\.html\fR, you should run \fBbundle exec rspec spec/my_spec\.rb\fR\.
 .
 .P
 Note that \fBbundle exec\fR does not require that an executable is available on your shell\'s \fB$PATH\fR\.
@@ -67,6 +67,9 @@ Add all gems in the bundle into Gem\.loaded_specs
 .
 .IP "" 0
 .
+.P
+Finally, \fBbundle exec\fR also implicitly modifies \fBGemfile\.lock\fR if the lockfile and the Gemfile do not match\. Bundler needs the Gemfile to determine things such as a gem\'s groups, \fBautorequire\fR, and platforms, etc\., and that information isn\'t stored in the lockfile\. The Gemfile and lockfile must be synced in order to \fBbundle exec\fR successfully, so \fBbundle exec\fR updates the lockfile beforehand\.
+.
 .SS "Loading"
 By default, when attempting to \fBbundle exec\fR to a file with a ruby shebang, Bundler will \fBKernel\.load\fR that file instead of using \fBKernel\.exec\fR\. For the vast majority of cases, this is a performance improvement\. In a rare few cases, this could cause some subtle side\-effects (such as dependence on the exact contents of \fB$0\fR or \fB__FILE__\fR) and the optimization can be disabled by enabling the \fBdisable_exec_load\fR setting\.
 .