build-graph 2.1.0 → 2.2.0

metadata

@@ -1,43 +1,71 @@
 --- !ruby/object:Gem::Specification
 name: build-graph
 version: !ruby/object:Gem::Version
-  version: 2.1.0
+  version: 2.2.0
 platform: ruby
 authors:
 - Samuel Williams
-autorequire: 
 bindir: bin
-cert_chain: []
-date: 2019-10-07 00:00:00.000000000 Z
+cert_chain:
+- |
+  -----BEGIN CERTIFICATE-----
+  MIIE2DCCA0CgAwIBAgIBATANBgkqhkiG9w0BAQsFADBhMRgwFgYDVQQDDA9zYW11
+  ZWwud2lsbGlhbXMxHTAbBgoJkiaJk/IsZAEZFg1vcmlvbnRyYW5zZmVyMRIwEAYK
+  CZImiZPyLGQBGRYCY28xEjAQBgoJkiaJk/IsZAEZFgJuejAeFw0yMjA4MDYwNDUz
+  MjRaFw0zMjA4MDMwNDUzMjRaMGExGDAWBgNVBAMMD3NhbXVlbC53aWxsaWFtczEd
+  MBsGCgmSJomT8ixkARkWDW9yaW9udHJhbnNmZXIxEjAQBgoJkiaJk/IsZAEZFgJj
+  bzESMBAGCgmSJomT8ixkARkWAm56MIIBojANBgkqhkiG9w0BAQEFAAOCAY8AMIIB
+  igKCAYEAomvSopQXQ24+9DBB6I6jxRI2auu3VVb4nOjmmHq7XWM4u3HL+pni63X2
+  9qZdoq9xt7H+RPbwL28LDpDNflYQXoOhoVhQ37Pjn9YDjl8/4/9xa9+NUpl9XDIW
+  sGkaOY0eqsQm1pEWkHJr3zn/fxoKPZPfaJOglovdxf7dgsHz67Xgd/ka+Wo1YqoE
+  e5AUKRwUuvaUaumAKgPH+4E4oiLXI4T1Ff5Q7xxv6yXvHuYtlMHhYfgNn8iiW8WN
+  XibYXPNP7NtieSQqwR/xM6IRSoyXKuS+ZNGDPUUGk8RoiV/xvVN4LrVm9upSc0ss
+  RZ6qwOQmXCo/lLcDUxJAgG95cPw//sI00tZan75VgsGzSWAOdjQpFM0l4dxvKwHn
+  tUeT3ZsAgt0JnGqNm2Bkz81kG4A2hSyFZTFA8vZGhp+hz+8Q573tAR89y9YJBdYM
+  zp0FM4zwMNEUwgfRzv1tEVVUEXmoFCyhzonUUw4nE4CFu/sE3ffhjKcXcY//qiSW
+  xm4erY3XAgMBAAGjgZowgZcwCQYDVR0TBAIwADALBgNVHQ8EBAMCBLAwHQYDVR0O
+  BBYEFO9t7XWuFf2SKLmuijgqR4sGDlRsMC4GA1UdEQQnMCWBI3NhbXVlbC53aWxs
+  aWFtc0BvcmlvbnRyYW5zZmVyLmNvLm56MC4GA1UdEgQnMCWBI3NhbXVlbC53aWxs
+  aWFtc0BvcmlvbnRyYW5zZmVyLmNvLm56MA0GCSqGSIb3DQEBCwUAA4IBgQB5sxkE
+  cBsSYwK6fYpM+hA5B5yZY2+L0Z+27jF1pWGgbhPH8/FjjBLVn+VFok3CDpRqwXCl
+  xCO40JEkKdznNy2avOMra6PFiQyOE74kCtv7P+Fdc+FhgqI5lMon6tt9rNeXmnW/
+  c1NaMRdxy999hmRGzUSFjozcCwxpy/LwabxtdXwXgSay4mQ32EDjqR1TixS1+smp
+  8C/NCWgpIfzpHGJsjvmH2wAfKtTTqB9CVKLCWEnCHyCaRVuKkrKjqhYCdmMBqCws
+  JkxfQWC+jBVeG9ZtPhQgZpfhvh+6hMhraUYRQ6XGyvBqEUe+yo6DKIT3MtGE2+CP
+  eX9i9ZWBydWb8/rvmwmX2kkcBbX0hZS1rcR593hGc61JR6lvkGYQ2MYskBveyaxt
+  Q2K9NVun/S785AP05vKkXZEFYxqG6EW012U4oLcFl5MySFajYXRYbuUpH6AY+HP8
+  voD0MPg1DssDLKwXyt1eKD/+Fq0bFWhwVM/1XiAXL7lyYUyOq24KHgQ2Csg=
+  -----END CERTIFICATE-----
+date: 1980-01-02 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
-  name: process-group
+  name: build-files
   requirement: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.1'
+        version: '1.8'
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.1'
+        version: '1.8'
 - !ruby/object:Gem::Dependency
-  name: build-files
+  name: build-files-monitor
   requirement: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.0'
+        version: '0.4'
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.0'
+        version: '0.4'
 - !ruby/object:Gem::Dependency
   name: console
   requirement: !ruby/object:Gem::Requirement
@@ -52,117 +80,25 @@ dependencies:
     - - "~>"
       - !ruby/object:Gem::Version
         version: '1.1'
-- !ruby/object:Gem::Dependency
-  name: build-makefile
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '1.0'
-  type: :development
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '1.0'
-- !ruby/object:Gem::Dependency
-  name: covered
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-  type: :development
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-- !ruby/object:Gem::Dependency
-  name: bundler
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-  type: :development
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-- !ruby/object:Gem::Dependency
-  name: rspec
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '3.4'
-  type: :development
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '3.4'
-- !ruby/object:Gem::Dependency
-  name: rake
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-  type: :development
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - ">="
-      - !ruby/object:Gem::Version
-        version: '0'
-description: "\tBuild::Graph is a framework for managing file-system based build processes.
-  It provides graph based build functionality which monitors the file-system for changes.
-  Because of this, it can efficiently manage large and complex process based builds.\n"
-email:
-- samuel.williams@oriontransfer.co.nz
 executables: []
 extensions: []
 extra_rdoc_files: []
 files:
-- ".gitignore"
-- ".rspec"
-- ".travis.yml"
-- Gemfile
-- README.md
-- Rakefile
-- build-graph.gemspec
 - lib/build/graph.rb
 - lib/build/graph/edge.rb
 - lib/build/graph/node.rb
 - lib/build/graph/task.rb
 - lib/build/graph/version.rb
 - lib/build/graph/walker.rb
-- spec/build/graph/build_test.rb
-- spec/build/graph/edge_spec.rb
-- spec/build/graph/graph_spec.rb
-- spec/build/graph/inherit_spec.rb
-- spec/build/graph/node_spec.rb
-- spec/build/graph/process_graph.rb
-- spec/build/graph/program/Benchmark.cpp
-- spec/build/graph/program/Benchmark.h
-- spec/build/graph/program/DictionarySort.h
-- spec/build/graph/program/ParallelMergeSort.h
-- spec/build/graph/program/main.cpp
-- spec/build/graph/task_spec.rb
-- spec/build/graph/walker_spec.rb
-- spec/spec_helper.rb
-homepage: ''
+- license.md
+- readme.md
+- releases.md
 licenses:
 - MIT
-metadata: {}
-post_install_message: 
+metadata:
+  documentation_uri: https://ioquatix.github.io/build-graph
+  funding_uri: https://github.com/sponsors/ioquatix
+  source_code_uri: https://github.com/ioquatix/build-graph.git
 rdoc_options: []
 require_paths:
 - lib
@@ -170,30 +106,15 @@ required_ruby_version: !ruby/object:Gem::Requirement
   requirements:
   - - ">="
     - !ruby/object:Gem::Version
-      version: '2.0'
+      version: '3.2'
 required_rubygems_version: !ruby/object:Gem::Requirement
   requirements:
   - - ">="
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubygems_version: 3.0.4
-signing_key: 
+rubygems_version: 4.0.3
 specification_version: 4
 summary: Build::Graph is a framework for build systems, with specific functionality
   for dealing with file based processes.
-test_files:
-- spec/build/graph/build_test.rb
-- spec/build/graph/edge_spec.rb
-- spec/build/graph/graph_spec.rb
-- spec/build/graph/inherit_spec.rb
-- spec/build/graph/node_spec.rb
-- spec/build/graph/process_graph.rb
-- spec/build/graph/program/Benchmark.cpp
-- spec/build/graph/program/Benchmark.h
-- spec/build/graph/program/DictionarySort.h
-- spec/build/graph/program/ParallelMergeSort.h
-- spec/build/graph/program/main.cpp
-- spec/build/graph/task_spec.rb
-- spec/build/graph/walker_spec.rb
-- spec/spec_helper.rb
+test_files: []

data/.gitignore

@@ -1,24 +0,0 @@
-*.gem
-*.rbc
-.bundle
-.config
-.yardoc
-Gemfile.lock
-InstalledFiles
-_yardoc
-coverage
-doc/
-lib/bundler/man
-pkg
-rdoc
-spec/reports
-test/tmp
-test/version_tmp
-tmp
-*.bundle
-*.so
-*.o
-*.a
-*.d
-mkmf.log
-.rspec_status

data/.rspec

@@ -1,4 +0,0 @@
---format documentation
---backtrace
---warnings
---require spec_helper

data/.travis.yml

@@ -1,19 +0,0 @@
-language: ruby
-dist: xenial
-cache: bundler
-
-addons:
-  apt:
-    sources:
-    - ubuntu-toolchain-r-test
-    packages:
-    - libstdc++-4.8-dev
-
-matrix:
-  include:
-    - rvm: 2.3
-    - rvm: 2.4
-    - rvm: 2.5
-    - rvm: 2.6
-    - rvm: 2.6
-      env: COVERAGE=BriefSummary,Coveralls

data/Gemfile

@@ -1,14 +0,0 @@
-source 'https://rubygems.org'
-
-# Use local code for testing.
-# gem "build-files", path: "../build-files"
-
-# Specify your gem's dependencies in build.gemspec
-gemspec
-
-group :test do
-	gem 'rb-fsevent'
-	gem 'rb-inotify'
-	
-	gem 'graphviz'
-end

data/README.md

@@ -1,99 +0,0 @@
-# Build::Graph
-
-Build::Graph is a framework for build systems, with specific functionality for dealing with file based processes.
-
-[![Build Status](https://secure.travis-ci.org/ioquatix/build-graph.svg)](http://travis-ci.org/ioquatix/build-graph)
-[![Code Climate](https://codeclimate.com/github/ioquatix/build-graph.svg)](https://codeclimate.com/github/ioquatix/build-graph)
-[![Coverage Status](https://coveralls.io/repos/ioquatix/build-graph/badge.svg)](https://coveralls.io/r/ioquatix/build-graph)
-
-## Installation
-
-Add this line to your application's Gemfile:
-
-	gem 'build-graph'
-
-And then execute:
-
-	$ bundle
-
-Or install it yourself as:
-
-	$ gem install build-graph
-
-## Usage
-
-A build graph is an abstract set of `[input, process, output]` nodes. A node executes it's process within the context of a `Task` which represents a specific set of inputs and outputs and is managed within a `Walker` that walks over graph nodes, regenerating tasks where required. If inputs or outputs change (i.e. become dirty), the old task is nullified.
-
-A `Walker` is used to traverse the build graph once. As it walks over the graph it builds a set of `Edge` relationships between nodes and only traverses relationships which are complete `Walker#wait_on_paths`. Parent nodes also wait until all their children are complete `Walker#wait_on_nodes` It also keeps track of failures `Walker#failed?` and fails all dependencies of a node.
-
-A `Task` is instantiated once per node when traversing the graph. The task represents a specific process being applied to the graph, e.g. build, clean, etc. It is responsible for actually performing any real actions and providing the methods to do so. A `Task` contains all details about the specific graph state at that point in time, e.g. `Task#children` and updating the node state in `Task#exit`. Statistics on the build graph are also captured through `Task` and `Walker`, e.g. number of nodes visited, etc.
-
-### Inputs and Outputs
-
-Inputs to a node should be all on-disk state and any additional parameters which cause it's behavior to produce different results.
-
-Outputs from a node should be all files that are generated directly by the processes within the node and sometimes it's children.
-
-### Dirty Propagation
-
-A `Node` has a set of `#inputs` and `#outputs` but these are abstract. For example, `#outputs` could be `:inherit` which means that the node symbolically has all the outputs of all it's direct children. A `Task`, at the time of execution, captures it's inputs and outputs and these may be monitored for changes in real time.
-
-File changes are currently detected using `File::mtime` as this is generally a good trade off between efficiency and accuracy.
-
-When a task is marked as dirty, it also marks all it's outputs as being dirty, which in cause could mark other tasks as dirty. This is the mechanism for which dirtiness propagates through the graph. The walker should only have to traverse the graph once to build it completely. If multiple updates are required (i.e. buidling one part of the graph implicitly dirties another part of the graph), the specification of the graph is incomplete and this may lead to problems within the build graph.
-
-### Example Graph
-
-	target("Library/UnitTest", [] -> :inherit) do
-		library([UnitTest.cpp] -> UnitTest.a) do
-			compile([UnitTest.cpp] -> UnitTest.o)
-			link([UnitTest.o] -> libUnitTest.a)
-		end
-		
-		copy headers: [UnitTest.hpp]
-		
-		# Outputs become libUnitTest.a and UnitTest.hpp
-	end
-
-	target("Executable/UnitTest", [] -> :inherit) do
-		depends("Library/UnitTest")
-		
-		executable(main.cpp -> UnitTest) do
-			compile(main.cpp -> main.o)
-			link([main.o, libUnitTest.a] -> UnitTest)
-		end
-		
-		# Outputs become UnitTest
-	end
-
-## Contributing
-
-1. Fork it
-2. Create your feature branch (`git checkout -b my-new-feature`)
-3. Commit your changes (`git commit -am 'Add some feature'`)
-4. Push to the branch (`git push origin my-new-feature`)
-5. Create new Pull Request
-
-## License
-
-Released under the MIT license.
-
-Copyright, 2012, 2014, 2016, by [Samuel G. D. Williams](http://www.codeotaku.com/samuel-williams).
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.

data/Rakefile

@@ -1,6 +0,0 @@
-require "bundler/gem_tasks"
-require "rspec/core/rake_task"
-
-RSpec::Core::RakeTask.new(:spec)
-
-task :default => :spec

data/build-graph.gemspec

@@ -1,35 +0,0 @@
-# coding: utf-8
-lib = File.expand_path('../lib', __FILE__)
-$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
-require 'build/graph/version'
-
-Gem::Specification.new do |spec|
-	spec.name          = "build-graph"
-	spec.version       = Build::Graph::VERSION
-	spec.authors       = ["Samuel Williams"]
-	spec.email         = ["samuel.williams@oriontransfer.co.nz"]
-	spec.summary       = %q{Build::Graph is a framework for build systems, with specific functionality for dealing with file based processes.}
-	spec.description   = <<-EOF
-	Build::Graph is a framework for managing file-system based build processes. It provides graph based build functionality which monitors the file-system for changes. Because of this, it can efficiently manage large and complex process based builds.
-	EOF
-	spec.homepage      = ""
-	spec.license       = "MIT"
-
-	spec.files         = `git ls-files`.split($/)
-	spec.executables   = spec.files.grep(%r{^bin/}) { |f| File.basename(f) }
-	spec.test_files    = spec.files.grep(%r{^(test|spec|features)/})
-	spec.require_paths = ["lib"]
-	
-	spec.required_ruby_version = '>= 2.0'
-	
-	spec.add_dependency "process-group", "~> 1.1"
-	spec.add_dependency "build-files", "~> 1.0"
-	spec.add_dependency "console", "~> 1.1"
-	
-	spec.add_development_dependency "build-makefile", "~> 1.0"
-	
-	spec.add_development_dependency "covered"
-	spec.add_development_dependency "bundler"
-	spec.add_development_dependency "rspec", "~> 3.4"
-	spec.add_development_dependency "rake"
-end

data/spec/build/graph/build_test.rb

@@ -1,85 +0,0 @@
-#!/usr/bin/env ruby
-
-$LOAD_PATH.unshift File.expand_path('../../../lib', __dir__)
-
-require 'graphviz'
-require_relative 'process_graph'
-
-include ProcessGraph
-
-program_root = Path.join(__dir__, "program")
-code_glob = Glob.new(program_root, "*.cpp")
-program_path = Path.join(program_root, "dictionary-sort")
-
-group = Process::Group.new
-walker = Walker.for(ProcessTask, group)
-
-top = ProcessNode.top code_glob, title: 'top' do
-	process code_glob, program_path, title: 'build' do
-		object_files = inputs.with(extension: ".o") do |input_path, output_path|
-			depfile_path = input_path + ".d"
-			
-			dependencies = Paths.new(input_path)
-			
-			if File.exist? depfile_path
-				depfile = Build::Makefile.load_file(depfile_path)
-				
-				dependencies = depfile[output_path] || dependencies
-			end
-			
-			process dependencies, output_path, title: 'compile' do
-				run("clang++", "-MMD", "-O3",
-					"-o", output_path.shortest_path(input_path.root),
-					"-c", input_path.relative_path, "-std=c++11",
-					chdir: input_path.root
-				)
-			end
-		end
-		
-		process object_files, program_path, title: 'link' do
-			run("clang++", "-O3", "-o", program_path, *object_files.to_a, "-lm", "-pthread")
-		end
-	end
-	
-	process program_path, title: 'run' do
-		run("./" + program_path.relative_path, chdir: program_path.root)
-	end
-end
-
-interrupted = false
-
-trap(:INT) do
-	exit(0)
-end
-
-viz = Graphviz::Graph.new
-viz.attributes[:rankdir] = 'LR'
-
-walker.run do
-	group.wait do
-		walker.update(top)
-	end
-	
-	walker.tasks.each do |node, task|
-		input_nodes = []
-		output_nodes = []
-		
-		task.inputs.each do |path|
-			input_nodes << viz.add_node(path.basename)
-		end
-		
-		task.outputs.each do |path|
-			output_nodes << viz.add_node(path.basename)
-		end
-		
-		if output_nodes.size == 1
-			input_nodes.each do |input_node|
-				edge = input_node.connect(output_nodes.first)
-				edge.attributes[:label] = node.title
-			end
-		end
-	end
-	
-	File.write('graph.dot', viz.to_dot)
-	`dot -Tpdf graph.dot > graph.pdf && open graph.pdf`
-end

data/spec/build/graph/edge_spec.rb

@@ -1,39 +0,0 @@
-#!/usr/bin/env rspec
-
-# Copyright, 2012, by Samuel G. D. Williams. <http://www.codeotaku.com>
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-
-require_relative 'process_graph'
-
-RSpec.describe Build::Graph::Edge do
-	let(:failed_task) {double(:failed? => true)}
-	
-	it "should fail if failed task is added" do
-		subject.traverse(failed_task)
-		
-		expect(subject.failed?).to be_truthy
-	end
-	
-	it "should fail if failed task is skipped" do
-		subject.skip!(failed_task)
-		
-		expect(subject.failed?).to be_truthy
-	end
-end