brightbox-cli 0.17.4 → 0.17.5

data/lib/brightbox-cli/vendor/brightbox-ini/lib/inifile.rb

@@ -0,0 +1,10 @@
+# $Id: inifile.rb 1 2007-01-17 15:21:30Z ironmo $
+
+# The 'inifile' gem will eventually be deprecated in favor of the
+# 'ini' gem as it becomes able to handle streams, stringio and string buffers of INI
+# formatted data.
+
+require 'ini'
+
+class IniFile < Ini
+end

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/bad_1.ini

@@ -0,0 +1,6 @@
+; having a paramater / value pair outside a section is an error
+one = 1
+
+[section_one]
+one = 1
+two = 2

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/bad_2.ini

@@ -0,0 +1,6 @@
+[section_one]
+one = 1
+two = 2
+
+; the following is not a valid line
+invalid line

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/comment.ini

@@ -0,0 +1,5 @@
+# comments should be ignored
+[section_one]
+one = 1
+two = 2
+

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/good.ini

@@ -0,0 +1,17 @@
+[section_one]
+one = 1
+two = 2
+
+[section_two]
+three =         3    
+
+; comments should be ignored
+[section three]
+four   =4
+five=5
+six =6
+
+[section_four]
+   [section_five]
+ seven and eight= 7 & 8
+

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/mixed_comment.ini

@@ -0,0 +1,7 @@
+# comments should be ignored
+; multiple comments characeters are supported
+; (I'm lookin' at you, samba)
+[section_one]
+one = 1
+two = 2
+

data/lib/brightbox-cli/vendor/brightbox-ini/test/data/param.ini

@@ -0,0 +1,5 @@
+; comments should be ignored
+[section_one]
+one : 1
+two:2
+

data/lib/brightbox-cli/vendor/brightbox-ini/test/test_inifile.rb

@@ -0,0 +1,273 @@
+# Code Generated by ZenTest v. 3.3.0
+#                 classname: asrt / meth =  ratio%
+#             Rini::IniFile:    0 /    9 =   0.00%
+
+$:.unshift(File.expand_path(File.dirname(__FILE__) + "/../lib"))
+require "inifile"
+
+begin; require 'turn'; rescue LoadError; end
+require 'test/unit' unless defined? $ZENTEST and $ZENTEST
+
+class TestIniFile < Test::Unit::TestCase
+
+  def setup
+    @ini_file = ::IniFile.new 'test/data/good.ini'
+    @contents = [
+      ['section_one', 'one', '1'],
+      ['section_one', 'two', '2'],
+      ['section_two', 'three', '3'],
+      ['section three', 'four', '4'],
+      ['section three', 'five', '5'],
+      ['section three', 'six', '6'],
+      ['section_five', 'seven and eight', '7 & 8']
+    ].sort
+  end
+
+  def test_class_load
+    ini_file = ::IniFile.load 'test/data/good.ini'
+    assert_instance_of ::IniFile, ini_file
+
+    # see if we can parse different style comments
+    assert_raise(::IniFile::Error) {::IniFile.load 'test/data/comment.ini'}
+
+    ini_file = ::IniFile.load 'test/data/comment.ini', :comment => '#'
+    assert_instance_of ::IniFile, ini_file
+
+    # see if we can parse mixed style comments
+    assert_raise(::IniFile::Error) {::IniFile.load 'test/data/mixed_comment.ini'}
+
+    ini_file = ::IniFile.load 'test/data/mixed_comment.ini', :comment => ';#'
+    assert_instance_of ::IniFile, ini_file
+
+    # see if we can parse different style param separators
+    assert_raise(::IniFile::Error) {::IniFile.load 'test/data/param.ini'}
+
+    ini_file = ::IniFile.load 'test/data/param.ini', :parameter => ':'
+    assert_instance_of ::IniFile, ini_file
+
+    # make sure we error out on files with bad lines
+    assert_raise(::IniFile::Error) {::IniFile.load 'test/data/bad_1.ini'}
+    assert_raise(::IniFile::Error) {::IniFile.load 'test/data/bad_2.ini'}
+  end
+
+  def test_clone
+    clone = @ini_file.clone
+    assert_equal @ini_file, clone
+    assert !clone.tainted?
+    assert !clone.frozen?
+
+    # the clone should be completely independent of the original
+    clone['new_section']['one'] = 1
+    assert_not_equal @ini_file, clone
+
+    # the tainted state is copied to clones
+    @ini_file.taint
+    assert @ini_file.tainted?
+
+    clone = @ini_file.clone
+    assert clone.tainted?
+
+    # the frozen state is also copied to clones
+    @ini_file.freeze
+    assert @ini_file.frozen?
+
+    clone = @ini_file.clone
+    assert clone.tainted?
+    assert clone.frozen?
+  end
+
+  def test_delete_section
+    assert_nil @ini_file.delete_section('section_nil')
+
+    h = {'one' => '1', 'two' => '2'}
+    assert_equal true, @ini_file.has_section?('section_one')
+    assert_equal h, @ini_file.delete_section('section_one')
+    assert_equal false, @ini_file.has_section?('section_one')
+    assert_nil @ini_file.delete_section('section_one')
+  end
+
+  def test_dup
+    dup = @ini_file.dup
+    assert_equal @ini_file, dup
+    assert !dup.tainted?
+    assert !dup.frozen?
+
+    # the duplicate should be completely independent of the original
+    dup['new_section']['one'] = 1
+    assert_not_equal @ini_file, dup
+
+    # the tainted state is copied to duplicates
+    @ini_file.taint
+    assert @ini_file.tainted?
+
+    dup = @ini_file.dup
+    assert dup.tainted?
+
+    # the frozen state, however, is not
+    @ini_file.freeze
+    assert @ini_file.frozen?
+
+    dup = @ini_file.dup
+    assert dup.tainted?
+    assert !dup.frozen?
+  end
+
+  def test_each
+    ary = []
+    @ini_file.each {|*args| ary << args}
+
+    assert_equal @contents, ary.sort
+
+    ary = []
+    ::IniFile.new('temp.ini').each {|*args| ary << args}
+    assert_equal [], ary
+  end
+
+  def test_each_section
+    expected = [
+      'section_one', 'section_two', 'section three',
+      'section_four', 'section_five'
+    ].sort
+
+    ary = []
+    @ini_file.each_section {|section| ary << section}
+
+    assert_equal expected, ary.sort
+
+    ary = []
+    ::IniFile.new('temp.ini').each_section {|section| ary << section}
+    assert_equal [], ary
+  end
+
+  def test_eql_eh
+    assert @ini_file.eql?(@ini_file)
+    assert @ini_file.eql?(@ini_file.clone)
+    assert !@ini_file.eql?('string')
+    assert !@ini_file.eql?(IniFile.new(''))
+  end
+
+  def test_freeze
+    assert_equal false, @ini_file.frozen?
+    @ini_file.each_section do |s|
+      assert_equal false, @ini_file[s].frozen?
+    end
+
+    @ini_file.freeze
+
+    assert_equal true, @ini_file.frozen?
+    @ini_file.each_section do |s|
+      assert_equal true, @ini_file[s].frozen?
+    end
+  end
+
+  def test_has_section_eh
+    assert_equal true,  @ini_file.has_section?('section_one')
+    assert_equal false, @ini_file.has_section?('section_ten')
+    assert_equal true,  @ini_file.has_section?(:section_two)
+    assert_equal false, @ini_file.has_section?(nil)
+
+    ini_file = ::IniFile.new 'temp.ini'
+    assert_equal false, ini_file.has_section?('section_one')
+    assert_equal false, ini_file.has_section?('one')
+    assert_equal false, ini_file.has_section?('two')
+  end
+
+  def test_index
+    expected = {
+      'one' => '1',
+      'two' => '2'
+    }
+    assert_equal expected, @ini_file[:section_one]
+
+    expected = {'three' => '3'}
+    assert_equal expected, @ini_file['section_two']
+
+    expected = {
+      'four' => '4',
+      'five' => '5',
+      'six'  => '6',
+    }
+    assert_equal expected, @ini_file['section three']
+
+    expected = {}
+    assert_equal expected, @ini_file['section_four']
+
+    expected = {'seven and eight' => '7 & 8'}
+    assert_equal expected, @ini_file['section_five']
+
+    expected = {}
+    assert_equal expected, @ini_file['section_six']
+
+    assert_nil @ini_file[nil]
+
+    expected = {}
+    ini_file = ::IniFile.new 'temp.ini'
+    assert_equal expected, ini_file['section_one']
+    assert_equal expected, ini_file['one']
+    assert_nil ini_file[nil]
+  end
+
+  def test_initialize
+    # see if we can parse different style comments
+    assert_raise(::IniFile::Error) {::IniFile.new 'test/data/comment.ini'}
+
+    ini_file = ::IniFile.new 'test/data/comment.ini', :comment => '#'
+    assert_equal true, ini_file.has_section?('section_one')
+
+    # see if we can parse different style param separators
+    assert_raise(::IniFile::Error) {::IniFile.new 'test/data/param.ini'}
+
+    ini_file = ::IniFile.new 'test/data/param.ini', :parameter => ':'
+    assert_equal true, ini_file.has_section?('section_one')
+    assert_equal '1', ini_file['section_one']['one']
+    assert_equal '2', ini_file['section_one']['two']
+
+    # make sure we error out on files with bad lines
+    assert_raise(::IniFile::Error) {::IniFile.new 'test/data/bad_1.ini'}
+    assert_raise(::IniFile::Error) {::IniFile.new 'test/data/bad_2.ini'}
+  end
+
+  def test_sections
+    expected = [
+      'section_one', 'section_two', 'section three',
+      'section_four', 'section_five'
+    ].sort
+
+    assert_equal expected, @ini_file.sections.sort
+
+    ini_file = ::IniFile.new 'temp.ini'
+    assert_equal [], ini_file.sections
+  end
+
+  def test_taint
+    assert_equal false, @ini_file.tainted?
+    @ini_file.each_section do |s|
+      assert_equal false, @ini_file[s].tainted?
+    end
+
+    @ini_file.taint
+
+    assert_equal true, @ini_file.tainted?
+    @ini_file.each_section do |s|
+      assert_equal true, @ini_file[s].tainted?
+    end
+  end
+
+  def test_write
+    tmp = 'test/data/temp.ini'
+    ::File.delete tmp if ::Kernel.test(?f, tmp)
+
+    @ini_file.save tmp
+    assert_equal true, ::Kernel.test(?f, tmp)
+
+    ::File.delete tmp if ::Kernel.test(?f, tmp)
+
+    ini_file = ::IniFile.new tmp
+    ini_file.save
+    assert_nil ::Kernel.test(?s, tmp)
+
+    ::File.delete tmp if ::Kernel.test(?f, tmp)
+  end
+end
+
+# EOF

data/lib/brightbox-cli/vendor/fog/.document

@@ -0,0 +1,3 @@
+README.rdoc
+lib/**/*.rb
+bin/*

data/lib/brightbox-cli/vendor/fog/.gitignore

@@ -0,0 +1,20 @@
+*~
+*.gem
+*.rbc
+*.sw?
+.rvmrc
+.bundle
+.DS_Store
+.idea
+bin/*
+!bin/fog
+!bin/rdoc
+coverage
+doc/*
+docs/_site/*
+docs/about/supported_services.markdown
+Gemfile.lock
+rdoc
+pkg
+spec/credentials.yml
+vendor/*

data/lib/brightbox-cli/vendor/fog/Gemfile

@@ -0,0 +1,3 @@
+source "http://rubygems.org"
+
+gemspec

data/lib/brightbox-cli/vendor/fog/README.rdoc

@@ -0,0 +1,147 @@
+http://geemus.s3.amazonaws.com/fog.png
+
+fog is the Ruby cloud computing library, top to bottom:
+
+* Collections provide a simplified interface, making clouds easier to work with and switch between.
+* Requests allow power users to get the most out of the features of each individual cloud.
+* Mocks make testing and integrating a breeze.
+
+== Getting Started
+
+  sudo gem install fog
+
+Now type 'fog' to try stuff, confident that fog will let you know what to do. Here is an example of wading through server creation for Amazon Elastic Compute Cloud:
+
+  >> server = Compute[:aws].servers.create
+  ArgumentError: image_id is required for this operation
+
+  >> server = Compute[:aws].servers.create(:image_id => 'ami-5ee70037')
+  <Fog::AWS::EC2::Server [...]>
+
+  >> server.destroy # cleanup after yourself or regret it, trust me
+  true
+
+== Collections
+
+A high level interface to each cloud is provided through collections, such as `images` and `servers`.
+You can see a list of available collections by calling `collections` on the connection object. You can try it out using the `fog` command:
+
+  >> Compute[:aws].collections
+  [:addresses, :directories, ..., :volumes, :zones]
+
+Some collections are available across multiple providers:
+
+* compute providers have +flavors+, +images+ and +servers+
+* dns providers have +zones+ and +records+
+* storage providers have +directories+ and +files+
+
+Collections share basic CRUD type operations, such as:
+* +all+ - fetch every object of that type from the provider.
+* +create+ - initialize a new record locally and a remote resource with the provider.
+* +get+ - fetch a single object by it's identity from the provider.
+* +new+ - initialize a new record locally, but do not create a remote resource with the provider.
+
+As an example, we'll try initializing and persisting a Rackspace Cloud server:
+
+  require 'fog'
+
+  compute = Fog::Compute.new(
+    :provider           => 'Rackspace',
+    :rackspace_api_key  => key,
+    :rackspace_username => username
+  )
+
+  # boot a gentoo server (flavor 1 = 256, image 3 = gentoo 2008.0)
+  server = compute.servers.create(:flavor_id => 1, :image_id => 3, :name => 'my_server')
+  server.wait_for { ready? } # give server time to boot
+
+  # DO STUFF
+
+  server.destroy # cleanup after yourself or regret it, trust me
+
+== Models
+
+Many of the collection methods return individual objects, which also provide common methods:
+* +destroy+ - will destroy the persisted object from the provider
+* +save+ - persist the object to the provider
+* +wait_for+ - takes a block and waits for either the block to return true for the object or for a timeout (defaults to 10 minutes)
+
+== Mocks
+
+As you might imagine, testing code using Fog can be slow and expensive, constantly turning on and and shutting down instances.
+Mocking allows skipping this overhead by providing an in memory representation resources as you make requests.
+Enabling mocking easy to use, before you run other commands, simply run:
+
+  Fog.mock!
+
+Then proceed as usual, if you run into unimplemented mocks fog will raise an error and as always contributions are welcome!
+
+== Requests
+
+Requests allow you to dive deeper when the models just can't cut it.
+You can see a list of available requests by calling #requests on the connection object.
+
+For instance, ec2 provides methods related to reserved instances that don't have any models (yet). Here is how you can lookup your reserved instances:
+
+  $ fog
+  >> Compute[:aws].describe_reserved_instances
+  #<Excon::Response [...]>
+
+It will return an {excon}[http://github.com/geemus/excon] response, which has `body`, `headers` and `status`. Both return nice hashes.
+
+== Go forth and conquer
+
+Play around and use the console to explore or check out {fog.io}[http://fog.io] for more details and examples. Once you are ready to start scripting fog, here is a quick hint on how to make connections without the command line thing to help you.
+
+  # create a compute connection
+  compute = Fog::Compute.new(:provider => 'AWS', :aws_access_key_id => ACCESS_KEY_ID, :aws_secret_access_key => SECRET_ACCESS_KEY)
+  # compute operations go here
+
+  # create a storage connection
+  storage = Fog::Storage.new(:provider => 'AWS', :aws_access_key_id => ACCESS_KEY_ID, :aws_secret_access_key => SECRET_ACCESS_KEY)
+  # storage operations go here
+
+geemus says: "That should give you everything you need to get started, but let me know if there is anything I can do to help!"
+
+== Contributing
+
+* Find something you would like to work on. For suggestions look for the `easy`, `medium` and `hard` tags in the {issues}[http://github.com/fog/fog/issues]
+* Fork the project and do your work in a topic branch.
+* Add shindo tests to prove your code works and run all the tests using `bundle exec rake`.
+* Rebase your branch against fog/fog to make sure everything is up to date.
+* Commit your changes and send a pull request.
+
+== Additional Resources
+
+{fog.io}[http://fog.io]
+
+== Sponsorship
+
+http://www.engineyard.com/images/logo.png
+
+All new work on fog is sponsored by {Engine Yard}[http://engineyard.com]
+
+== Copyright
+
+(The MIT License)
+
+Copyright (c) 2010 {geemus (Wesley Beary)}[http://github.com/geemus]
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.