brightbox-cli 0.13.0

data/lib/brightbox-cli/vendor/fog/tests/storage/requests/rackspace/object_tests.rb

@@ -0,0 +1,78 @@
+Shindo.tests('Fog::Storage[:rackspace] | object requests', [:rackspace]) do
+
+  unless Fog.mocking?
+    @directory = Fog::Storage[:rackspace].directories.create(:key => 'fogobjecttests')
+  end
+
+  tests('success') do
+
+    tests("#put_object('fogobjecttests', 'fog_object')").succeeds do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].put_object('fogobjecttests', 'fog_object', lorem_file)
+    end
+
+    tests("#get_object('fogobjectests', 'fog_object')").succeeds do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].get_object('fogobjecttests', 'fog_object')
+    end
+
+    tests("#get_object('fogobjecttests', 'fog_object', &block)").returns(lorem_file.read) do
+      pending if Fog.mocking?
+      data = ''
+      Fog::Storage[:rackspace].get_object('fogobjecttests', 'fog_object') do |chunk, remaining_bytes, total_bytes|
+        data << chunk
+      end
+      data
+    end
+
+    tests("#head_object('fogobjectests', 'fog_object')").succeeds do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].head_object('fogobjecttests', 'fog_object')
+    end
+
+    tests("#delete_object('fogobjecttests', 'fog_object')").succeeds do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].delete_object('fogobjecttests', 'fog_object')
+    end
+
+  end
+
+  tests('failure') do
+
+    tests("#get_object('fogobjecttests', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].get_object('fogobjecttests', 'fog_non_object')
+    end
+
+    tests("#get_object('fognoncontainer', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].get_object('fognoncontainer', 'fog_non_object')
+    end
+
+    tests("#head_object('fogobjecttests', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].head_object('fogobjecttests', 'fog_non_object')
+    end
+
+    tests("#head_object('fognoncontainer', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].head_object('fognoncontainer', 'fog_non_object')
+    end
+
+    tests("#delete_object('fogobjecttests', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].delete_object('fogobjecttests', 'fog_non_object')
+    end
+
+    tests("#delete_object('fognoncontainer', 'fog_non_object')").raises(Fog::Storage::Rackspace::NotFound) do
+      pending if Fog.mocking?
+      Fog::Storage[:rackspace].delete_object('fognoncontainer', 'fog_non_object')
+    end
+
+  end
+
+  unless Fog.mocking?
+    @directory.destroy
+  end
+
+end

data/lib/brightbox-cli/vendor/gli/.gitignore

@@ -0,0 +1,10 @@
+doc
+html
+*.sw?
+pkg
+coverage
+.bundle
+cruddo.rdoc
+gli.wiki
+Gemfile.lock
+results.html

data/lib/brightbox-cli/vendor/gli/.rvmrc

@@ -0,0 +1 @@
+rvm use 1.9.2@gli-dev

data/lib/brightbox-cli/vendor/gli/Gemfile

@@ -0,0 +1,5 @@
+source :rubygems
+
+gemspec
+
+gem "rcov", ">= 0.9.8", :platforms => :mri_18

data/lib/brightbox-cli/vendor/gli/LICENSE.txt

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

data/lib/brightbox-cli/vendor/gli/README.rdoc

@@ -0,0 +1,54 @@
+= Git-Like Interface Command Line Parser
+
+Author::  Dave Copeland (mailto:davetron5000 at g mail dot com)
+Copyright:: Copyright (c) 2010 by Dave Copeland
+License:: Distributes under the Apache License, see LICENSE.txt in the source distro
+
+This is a DSL you can use to create a command line interface like git, gem or svn, in that the first argument is a command, and there are global and command specific flags.
+
+* {Source on Github}[http://github.com/davetron5000/gli]
+* RDoc[http://davetron5000.github.com/gli]
+
+== Use
+
+Install if you need to:
+
+    gem install gli
+
+The simplest way to get started is to create a scaffold project
+
+    gli init my_proj command_name other_command_name
+
+This will create a basic scaffold project in <tt>./my_proj</tt> with:
+
+* executable in <tt>./my_proj/bin/my_proj</tt>.  This file demonstrates most of what you need to describe your command line interface.
+* an empty test in <tt>./my_proj/test/tc_nothing.rb</tt> that can bootstrap your tests
+* a gemspec shell
+* a README shell
+* Rakefile that can generate RDoc, package your Gem and run tests
+* A <tt>Gemfile</tt> suitable for use with Bundler to manage development-time dependencies
+
+== Supported Platforms
+
+Known to work on
+
+* 1.8.7
+* 1.9.2
+* Ruby Enterprise Edition 1.8.7
+* Rubinius 1.0.1
+* JRuby 1.5.2 
+
+If you're interested in other versions of Ruby, let me know, and I'll add them to my test suite
+
+== Documentation
+
+Extensive documentation is {available at the wiki}[https://github.com/davetron5000/gli/wiki].  For API Documentation, start with the GLI module.
+
+== Links
+
+* [http://davetron5000.github.com/gli] - RubyDoc
+* [http://www.github.com/davetron5000/gli] - Source on GitHub
+* [http://www.github.com/davetron5000/gli/wiki] - Documentation Wiki
+* [http://www.github.com/davetron5000/gli/wiki/Changelog] - Changelog
+
+:include:gli.rdoc

data/lib/brightbox-cli/vendor/gli/Rakefile

@@ -0,0 +1,84 @@
+require 'rake/clean'
+require 'rubygems'
+require 'rake/gempackagetask'
+require 'rake/testtask'
+require 'rake/rdoctask'
+require 'sdoc'
+require 'grancher/task'
+require 'reek/rake/task'
+require 'roodi'
+require 'roodi_task'
+require 'cucumber'
+require 'cucumber/rake/task'
+
+CLEAN << "cruddo.rdoc"
+CLEAN << "log"
+CLOBBER << FileList['**/*.rbc']
+
+Grancher::Task.new do |g|
+  g.branch = 'gh-pages'
+  g.push_to = 'origin'
+  g.directory 'html'
+end
+
+Rake::RDocTask.new do |rd|
+  rd.main = "README.rdoc"
+  rd.rdoc_files.include("README.rdoc","lib/**/*.rb","bin/**/*")
+  rd.options << '--fmt' << 'shtml'
+  rd.template = 'direct'
+  rd.title = 'Git Like Interface'
+end
+
+spec = eval(File.read('gli.gemspec'))
+
+Rake::GemPackageTask.new(spec) do |pkg|
+end
+
+Reek::Rake::Task.new do |t|
+  t.fail_on_error = true
+  t.config_files = ['test/gli.reek']
+  t.source_files = FileList['lib/**/*.rb'] - FileList['lib/support/*.rb']
+end
+
+RoodiTask.new do |t|
+  t.patterns = ['lib/*.rb','lib/gli/*.rb']
+  t.config = 'test/roodi.yaml'
+end
+
+Rake::TestTask.new do |t|
+  t.libs << "test"
+  t.test_files = FileList['test/tc_*.rb']
+end
+
+CUKE_RESULTS = 'results.html'
+CLEAN << CUKE_RESULTS
+Cucumber::Rake::Task.new(:features) do |t|
+  t.cucumber_opts = "features --format html -o #{CUKE_RESULTS} --format progress -x"
+  t.fork = false
+end
+
+begin
+  require 'rcov/rcovtask'
+  task :clobber_coverage do
+    rm_rf "coverage"
+  end
+
+  desc 'Measures test coverage'
+  task :coverage => :rcov do
+    puts "coverage/index.html contains what you need"
+  end
+
+  Rcov::RcovTask.new do |t|
+    t.libs << 'lib'
+    t.test_files = FileList['test/tc_*.rb']
+  end
+rescue LoadError
+  $stderr.puts "rcov not installed; you won't be able to check code coverage"
+  $stderr.puts "Since rcov only works on MRI 1.8.7, this shouldn't be a problem"
+end
+
+desc 'Publish rdoc on github pages and push to github'
+task :publish_rdoc => [:rdoc,:publish]
+
+task :default => [:test,:features,:roodi,:reek]
+

data/lib/brightbox-cli/vendor/gli/bin/gli

@@ -0,0 +1,72 @@
+#!/usr/bin/env ruby
+# 1.9 adds realpath to resolve symlinks; 1.8 doesn't
+# have this method, so we add it so we get resolved symlinks
+# and compatibility
+unless File.respond_to? :realpath
+  class File #:nodoc:
+    def self.realpath path
+      return realpath(File.readlink(path)) if symlink?(path)
+      path
+    end
+  end
+end
+
+$: << File.expand_path(File.dirname(File.realpath(__FILE__)) + '/../lib') 
+
+require 'gli'
+require 'support/scaffold'
+require 'gli_version'
+
+include GLI
+
+program_desc 'gli allows you to create the scaffolding for a GLI-powered application'
+
+version GLI::VERSION
+desc 'Be verbose'
+switch :v
+
+desc 'Dry run; don''t change the disk'
+switch :n
+
+desc 'Root dir of project'
+long_desc 'This is the directory where the project''s directory will be made, so if you specify a project name ''foo'' and the root dir of ''.'', the directory ''./foo'' will be created'
+default_value '.'
+flag [:r,:root]
+
+desc 'Create a new GLI-based project'
+long_desc <<EOS
+This will create a scaffold command line project that uses GLI
+for command line processing.  Specifically, this will create
+an executable ready to go, as well as a lib and test directory, all
+inside the directory named for your project
+EOS
+arg_name 'project_name [command[ command]*]'
+command [:init,:scaffold] do |c|
+
+  c.desc 'Create an ext dir'
+  c.switch [:e,:ext]
+
+  c.desc 'Do not create a test dir'
+  c.switch [:notest]
+
+  c.desc 'Overwrite/ignore existing files and directories'
+  c.switch [:force]
+
+  c.action do |g,o,args|
+    if args.length < 1
+      raise 'You must specify the name of your project'
+    end
+    Scaffold.create_scaffold(g[:r],!o[:notest],o[:e],args[0],args[1..-1],o[:force],g[:n])
+  end
+end
+
+pre do |global,command,options,args|
+  puts "Executing #{command.name}" if global[:v]
+  true
+end
+
+post do |global,command,options,args|
+  puts "Executed #{command.name}" if global[:v]
+end
+
+exit run(ARGV)

data/lib/brightbox-cli/vendor/gli/bin/report_on_rake_results

@@ -0,0 +1,10 @@
+#!/usr/bin/env ruby
+require 'yaml'
+require 'rainbow'
+
+results = YAML::load(STDIN)
+success = results["successes"] || []
+errors = results["errors"] || []
+success.each { |ruby| puts ruby.color(:green) }
+errors.each { |ruby| puts ruby.color(:red) }
+exit -1 unless errors.empty?

data/lib/brightbox-cli/vendor/gli/bin/test_all_rubies.sh

@@ -0,0 +1,2 @@
+rvm 1.9.2@gli-dev,1.8.7@gli-dev,jruby@gli-dev,rbx@gli-dev,ree@gli-dev --yaml rake test | bin/report_on_rake_results
+rake clobber > /dev/null 2>&1

data/lib/brightbox-cli/vendor/gli/features/gli_executable.feature

@@ -0,0 +1,88 @@
+Feature: The GLI executable works as intended
+  As a developer who wants to make a GLI-powered command-line app
+  When I use the app provided by GLI
+  I get a reasonably working application
+
+  Background:
+    Given I have GLI installed
+      And my terminal size is "80x24"
+
+  Scenario Outline: Getting Help for GLI
+    When I run `gli <command>`
+    Then the exit status should be 0
+     And the output should contain:
+    """
+    usage: gli [global options] command [command options]
+
+    Version:
+    """
+     And the output should contain:
+    """
+    Global Options:
+        -n             - Dry run; dont change the disk
+        -r, --root=arg - Root dir of project (default: .)
+        -v             - Be verbose
+
+    Commands:
+        help           - Shows list of commands or help for one command
+        init, scaffold - Create a new GLI-based project
+    """
+
+    Examples:
+    |command|
+    |       |
+    |help   |
+
+
+  Scenario Outline: Getting help on scaffolding
+    When I run `gli help <command>`
+    Then the exit status should be 0
+     And the output should contain exactly:
+    """
+    init [command options] project_name [command[ command]*]
+        Create a new GLI-based project
+
+        This will create a scaffold command line project that uses GLI for command 
+        line processing. Specifically, this will create an executable ready to go, as
+        well as a lib and test directory, all inside the directory named for your
+        project
+
+    Command Options:
+        -e, --ext - Create an ext dir
+        --force   - Overwrite/ignore existing files and directories
+        --notest  - Do not create a test dir
+
+    """
+
+    Examples:
+      |command  |
+      |init     |
+      |scaffold |
+
+
+  Scenario: GLI correctly identifies non-existent command
+    When I run `gli foobar`
+    Then the exit status should not be 0
+     And the output should contain exactly:
+     """
+     error: Unknown command 'foobar'. Use 'gli help' for a list of commands
+
+     """
+
+  Scenario: GLI correctly identifies non-existent global flag
+    When I run `gli -q help`
+    Then the exit status should not be 0
+     And the output should contain exactly:
+     """
+     error: Unknown option -q. Use 'gli help' for a list of global options
+
+     """
+
+  Scenario: GLI correctly identifies non-existent command flag
+    When I run `gli init -q`
+    Then the exit status should not be 0
+     And the output should contain exactly:
+     """
+     error: Unknown option -q. Use 'gli help init' for a list of command options
+
+     """