breadkit 0.1.0 → 0.2.0

data/data/parts/ck_bd04.yml

@@ -0,0 +1,29 @@
+# Four separate SPST positions. PnA/PnB are logical position-side names, not manufacturer terminal numbers.
+# The datasheet gives 7.55 mm between contact rows. Three breadboard pitches are 7.62 mm.
+# https://www.littelfuse.com/assetdocs/littelfuse-ck-dip-bd-series-datasheet?assetguid=c1d4e4f2-7607-4309-afba-ad965b566d35
+id: ck_bd04
+category: switch
+placement: footprint
+straddle: true
+datasheet_url: https://www.littelfuse.com/assetdocs/littelfuse-ck-dip-bd-series-datasheet?assetguid=c1d4e4f2-7607-4309-afba-ad965b566d35
+pins:
+  - {num: P1A, type: passive}
+  - {num: P1B, type: passive}
+  - {num: P2A, type: passive}
+  - {num: P2B, type: passive}
+  - {num: P3A, type: passive}
+  - {num: P3B, type: passive}
+  - {num: P4A, type: passive}
+  - {num: P4B, type: passive}
+footprint:
+  P1A: [0, 0]
+  P1B: [0, 3]
+  P2A: [1, 0]
+  P2B: [1, 3]
+  P3A: [2, 0]
+  P3B: [2, 3]
+  P4A: [3, 0]
+  P4B: [3, 3]
+switch: [[P1A, P1B], [P2A, P2B], [P3A, P3B], [P4A, P4B]]
+independent_switches: true
+render: {shape: generic, label: C&K BD04}

data/data/parts/crystal.yml

@@ -0,0 +1,7 @@
+id: crystal
+category: passive
+placement: leads
+pins:
+  - {num: 1, name: "1", type: passive}
+  - {num: 2, name: "2", type: passive}
+render: {shape: generic}

data/data/parts/dc_jack_2wire.yml

@@ -0,0 +1,8 @@
+id: dc_jack_2wire
+category: power
+placement: offboard
+pins:
+  - {num: 1, name: "POS", type: power}
+  - {num: 2, name: "NEG", type: ground}
+polarity: {positive: POS, negative: NEG}
+render: {shape: offboard, label: Dc Jack 2wire}

data/data/parts/diode.yml

@@ -6,3 +6,4 @@ pins:
   - {num: 2, name: cathode, aliases: [k]}
 polarity: {positive: anode, negative: cathode}
 render: {shape: diode}
+attributes: {bias: [forward, reverse]}

data/data/parts/esp32_devkitc_v4_wroom32e.yml

@@ -0,0 +1,86 @@
+# https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-devkitc/user_guide.html
+# FLASH_* header pins are reserved for the module's SPI flash and must not be used for external wiring.
+id: esp32_devkitc_v4_wroom32e
+category: module
+placement: footprint
+straddle: true
+pins:
+  - {num: 1, name: 3V3, type: power}
+  - {num: 2, name: EN, type: reset}
+  - {num: 3, name: VP, type: input, aliases: [GPIO36], max_voltage: 3.3}
+  - {num: 4, name: VN, type: input, aliases: [GPIO39], max_voltage: 3.3}
+  - {num: 5, name: IO34, type: input, aliases: [GPIO34], max_voltage: 3.3}
+  - {num: 6, name: IO35, type: input, aliases: [GPIO35], max_voltage: 3.3}
+  - {num: 7, name: IO32, type: gpio, aliases: [GPIO32], max_voltage: 3.3, output_capable: true}
+  - {num: 8, name: IO33, type: gpio, aliases: [GPIO33], max_voltage: 3.3, output_capable: true}
+  - {num: 9, name: IO25, type: gpio, aliases: [GPIO25], max_voltage: 3.3, output_capable: true}
+  - {num: 10, name: IO26, type: gpio, aliases: [GPIO26], max_voltage: 3.3, output_capable: true}
+  - {num: 11, name: IO27, type: gpio, aliases: [GPIO27], max_voltage: 3.3, output_capable: true}
+  - {num: 12, name: IO14, type: gpio, aliases: [GPIO14], max_voltage: 3.3, output_capable: true}
+  - {num: 13, name: IO12, type: gpio, aliases: [GPIO12], max_voltage: 3.3, output_capable: true}
+  - {num: 14, name: GND1, type: ground, aliases: [GND]}
+  - {num: 15, name: IO13, type: gpio, aliases: [GPIO13], max_voltage: 3.3, output_capable: true}
+  - {num: 16, name: FLASH_D2, type: data}
+  - {num: 17, name: FLASH_D3, type: data}
+  - {num: 18, name: FLASH_CMD, type: data}
+  - {num: 19, name: 5V, type: power}
+  - {num: 20, name: FLASH_CLK, type: data}
+  - {num: 21, name: FLASH_D0, type: data}
+  - {num: 22, name: FLASH_D1, type: data}
+  - {num: 23, name: IO15, type: gpio, aliases: [GPIO15], max_voltage: 3.3, output_capable: true}
+  - {num: 24, name: IO2, type: gpio, aliases: [GPIO2], max_voltage: 3.3, output_capable: true}
+  - {num: 25, name: IO0, type: gpio, aliases: [GPIO0], max_voltage: 3.3, output_capable: true}
+  - {num: 26, name: IO4, type: gpio, aliases: [GPIO4], max_voltage: 3.3, output_capable: true}
+  - {num: 27, name: IO16, type: gpio, aliases: [GPIO16], max_voltage: 3.3, output_capable: true}
+  - {num: 28, name: IO17, type: gpio, aliases: [GPIO17], max_voltage: 3.3, output_capable: true}
+  - {num: 29, name: IO5, type: gpio, aliases: [GPIO5], max_voltage: 3.3, output_capable: true}
+  - {num: 30, name: IO18, type: gpio, aliases: [GPIO18], max_voltage: 3.3, output_capable: true}
+  - {num: 31, name: IO19, type: gpio, aliases: [GPIO19], max_voltage: 3.3, output_capable: true}
+  - {num: 32, name: GND2, type: ground}
+  - {num: 33, name: IO21, type: gpio, aliases: [GPIO21], max_voltage: 3.3, output_capable: true}
+  - {num: 34, name: RX, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 35, name: TX, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 36, name: IO22, type: gpio, aliases: [GPIO22], max_voltage: 3.3, output_capable: true}
+  - {num: 37, name: IO23, type: gpio, aliases: [GPIO23], max_voltage: 3.3, output_capable: true}
+  - {num: 38, name: GND3, type: ground}
+internal: [[GND1, GND2], [GND2, GND3]]
+footprint:
+  "1": [0, 0]
+  "2": [1, 0]
+  "3": [2, 0]
+  "4": [3, 0]
+  "5": [4, 0]
+  "6": [5, 0]
+  "7": [6, 0]
+  "8": [7, 0]
+  "9": [8, 0]
+  "10": [9, 0]
+  "11": [10, 0]
+  "12": [11, 0]
+  "13": [12, 0]
+  "14": [13, 0]
+  "15": [14, 0]
+  "16": [15, 0]
+  "17": [16, 0]
+  "18": [17, 0]
+  "19": [18, 0]
+  "20": [18, 10]
+  "21": [17, 10]
+  "22": [16, 10]
+  "23": [15, 10]
+  "24": [14, 10]
+  "25": [13, 10]
+  "26": [12, 10]
+  "27": [11, 10]
+  "28": [10, 10]
+  "29": [9, 10]
+  "30": [8, 10]
+  "31": [7, 10]
+  "32": [6, 10]
+  "33": [5, 10]
+  "34": [4, 10]
+  "35": [3, 10]
+  "36": [2, 10]
+  "37": [1, 10]
+  "38": [0, 10]
+render: {shape: module, label: ESP32 DevKitC V4, size_mm: [48.26, 27.94], fill: "#2C2C2A", stroke: "#171715", text_color: "#FFFFFF"}

data/data/parts/irlz44n.yml

@@ -0,0 +1,10 @@
+# Infineon TO-220AB, front view: gate, drain, source.
+# https://www.infineon.com/assets/row/public/documents/24/49/infineon-irlz44n-datasheet-en.pdf
+id: irlz44n
+category: mosfet
+placement: leads
+pins:
+  - {num: 1, name: gate, aliases: [g]}
+  - {num: 2, name: drain, aliases: [d]}
+  - {num: 3, name: source, aliases: [s]}
+render: {shape: generic}

data/data/parts/l293d.yml

@@ -0,0 +1,24 @@
+# https://www.ti.com/lit/ds/symlink/l293.pdf
+id: l293d
+category: ic
+placement: dip
+package: {pins: 16}
+pins:
+  - {num: 1, name: EN12, type: input}
+  - {num: 2, name: 1A, type: input}
+  - {num: 3, name: 1Y, type: output}
+  - {num: 4, name: GND1, type: ground}
+  - {num: 5, name: GND2, type: ground}
+  - {num: 6, name: 2Y, type: output}
+  - {num: 7, name: 2A, type: input}
+  - {num: 8, name: VCC2, type: power}
+  - {num: 9, name: EN34, type: input}
+  - {num: 10, name: 3A, type: input}
+  - {num: 11, name: 3Y, type: output}
+  - {num: 12, name: GND3, type: ground}
+  - {num: 13, name: GND4, type: ground}
+  - {num: 14, name: 4Y, type: output}
+  - {num: 15, name: 4A, type: input}
+  - {num: 16, name: VCC1, type: power}
+internal: [[GND1, GND2], [GND2, GND3], [GND3, GND4]]
+render: {shape: dip, label: L293D}

data/data/parts/led.yml

@@ -7,3 +7,4 @@ pins:
 polarity: {positive: anode, negative: cathode}
 flags: [needs_series_resistor]
 render: {shape: led_5mm}
+attributes: {color: css_color, bias: [forward, reverse]}

data/data/parts/lm358.yml

@@ -0,0 +1,16 @@
+# https://www.ti.com/lit/ds/symlink/lm358.pdf
+id: lm358
+category: ic
+placement: dip
+package: {pins: 8}
+pins:
+  - {num: 1, name: OUT1, type: output}
+  - {num: 2, name: IN1_MINUS, type: input}
+  - {num: 3, name: IN1_PLUS, type: input}
+  - {num: 4, name: V_MINUS, type: power}
+  - {num: 5, name: IN2_PLUS, type: input}
+  - {num: 6, name: IN2_MINUS, type: input}
+  - {num: 7, name: OUT2, type: output}
+  - {num: 8, name: V_PLUS, type: power}
+supply_range: [3, 30]
+render: {shape: dip, label: LM358}

data/data/parts/lm393.yml

@@ -0,0 +1,16 @@
+# https://www.ti.com/lit/ds/symlink/lm393.pdf
+id: lm393
+category: ic
+placement: dip
+package: {pins: 8}
+pins:
+  - {num: 1, name: OUT1, type: open_drain}
+  - {num: 2, name: IN1_MINUS, type: input}
+  - {num: 3, name: IN1_PLUS, type: input}
+  - {num: 4, name: GND, type: ground}
+  - {num: 5, name: IN2_PLUS, type: input}
+  - {num: 6, name: IN2_MINUS, type: input}
+  - {num: 7, name: OUT2, type: open_drain}
+  - {num: 8, name: VCC, type: power}
+supply_range: [2, 36]
+render: {shape: dip, label: LM393}

data/data/parts/ne555.yml

@@ -4,13 +4,13 @@ category: ic
 placement: dip
 package: {pins: 8}
 pins:
-  - {num: 1, name: GND, role: ground}
+  - {num: 1, name: GND, type: ground}
   - {num: 2, name: TRIG}
   - {num: 3, name: OUT}
   - {num: 4, name: RESET}
   - {num: 5, name: CTRL}
   - {num: 6, name: THR}
   - {num: 7, name: DIS}
-  - {num: 8, name: VCC, role: power}
+  - {num: 8, name: VCC, type: power}
 supply_range: [4.5, 16.0]
 render: {shape: dip, label: NE555}

data/data/parts/ntc_thermistor.yml

@@ -0,0 +1,7 @@
+id: ntc_thermistor
+category: passive
+placement: leads
+pins:
+  - {num: 1, name: "1", type: passive}
+  - {num: 2, name: "2", type: passive}
+render: {shape: generic}

data/data/parts/photoresistor.yml

@@ -0,0 +1,8 @@
+id: photoresistor
+aliases: [cds_cell, ldr]
+category: passive
+placement: leads
+pins:
+  - {num: 1, name: "1", type: passive}
+  - {num: 2, name: "2", type: passive}
+render: {shape: generic}

data/data/parts/pico.yml

@@ -0,0 +1,89 @@
+# https://datasheets.raspberrypi.com/pico/Pico-2-Pinout.pdf
+id: pico
+category: module
+placement: footprint
+straddle: true
+pins:
+  - {num: 1, name: GP0, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 2, name: GP1, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 3, name: GND1, type: ground, aliases: [GND]}
+  - {num: 4, name: GP2, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 5, name: GP3, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 6, name: GP4, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 7, name: GP5, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 8, name: GND2, type: ground}
+  - {num: 9, name: GP6, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 10, name: GP7, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 11, name: GP8, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 12, name: GP9, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 13, name: GND3, type: ground}
+  - {num: 14, name: GP10, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 15, name: GP11, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 16, name: GP12, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 17, name: GP13, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 18, name: GND4, type: ground}
+  - {num: 19, name: GP14, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 20, name: GP15, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 21, name: GP16, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 22, name: GP17, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 23, name: GND5, type: ground}
+  - {num: 24, name: GP18, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 25, name: GP19, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 26, name: GP20, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 27, name: GP21, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 28, name: GND6, type: ground}
+  - {num: 29, name: GP22, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 30, name: RUN, type: reset}
+  - {num: 31, name: GP26, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 32, name: GP27, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 33, name: AGND, type: ground}
+  - {num: 34, name: GP28, type: gpio, max_voltage: 3.3, output_capable: true}
+  - {num: 35, name: ADC_VREF, type: analog}
+  - {num: 36, name: 3V3_OUT, type: power, aliases: [3V3]}
+  - {num: 37, name: 3V3_EN, type: input}
+  - {num: 38, name: GND7, type: ground}
+  - {num: 39, name: VSYS, type: power}
+  - {num: 40, name: VBUS, type: power}
+internal: [[GND1, GND2], [GND2, GND3], [GND3, GND4], [GND4, GND5], [GND5, GND6], [GND6, AGND], [AGND, GND7]]
+footprint:
+  "1": [0, 0]
+  "2": [1, 0]
+  "3": [2, 0]
+  "4": [3, 0]
+  "5": [4, 0]
+  "6": [5, 0]
+  "7": [6, 0]
+  "8": [7, 0]
+  "9": [8, 0]
+  "10": [9, 0]
+  "11": [10, 0]
+  "12": [11, 0]
+  "13": [12, 0]
+  "14": [13, 0]
+  "15": [14, 0]
+  "16": [15, 0]
+  "17": [16, 0]
+  "18": [17, 0]
+  "19": [18, 0]
+  "20": [19, 0]
+  "21": [19, 7]
+  "22": [18, 7]
+  "23": [17, 7]
+  "24": [16, 7]
+  "25": [15, 7]
+  "26": [14, 7]
+  "27": [13, 7]
+  "28": [12, 7]
+  "29": [11, 7]
+  "30": [10, 7]
+  "31": [9, 7]
+  "32": [8, 7]
+  "33": [7, 7]
+  "34": [6, 7]
+  "35": [5, 7]
+  "36": [4, 7]
+  "37": [3, 7]
+  "38": [2, 7]
+  "39": [1, 7]
+  "40": [0, 7]
+render: {shape: module, label: Raspberry Pi Pico, size_mm: [51, 21], fill: "#2C2C2A", stroke: "#171715", text_color: "#FFFFFF"}

data/data/parts/resistor.yml

@@ -5,3 +5,4 @@ pins:
   - {num: 1, name: "1"}
   - {num: 2, name: "2"}
 render: {shape: resistor}
+attributes: {bands: [4, 5]}

data/data/parts/sc56_11ewa.yml

@@ -0,0 +1,30 @@
+# Kingbright SC56-11EWA: 0.56-inch common-cathode display.
+# https://www.kingbrightusa.com/images/catalog/spec/sc56-11ewa.pdf
+id: sc56_11ewa
+category: display
+placement: footprint
+straddle: true
+pins:
+  - {num: 1, name: E, type: input}
+  - {num: 2, name: D, type: input}
+  - {num: 3, name: CATHODE1, type: passive, aliases: [CATHODE]}
+  - {num: 4, name: C, type: input}
+  - {num: 5, name: DP, type: input}
+  - {num: 6, name: B, type: input}
+  - {num: 7, name: A, type: input}
+  - {num: 8, name: CATHODE2, type: passive}
+  - {num: 9, name: F, type: input}
+  - {num: 10, name: G, type: input}
+internal: [[CATHODE1, CATHODE2]]
+footprint:
+  "1": [0, 0]
+  "2": [1, 0]
+  "3": [2, 0]
+  "4": [3, 0]
+  "5": [4, 0]
+  "6": [4, 6]
+  "7": [3, 6]
+  "8": [2, 6]
+  "9": [1, 6]
+  "10": [0, 6]
+render: {shape: seven_segment, label: SC56-11EWA}

data/data/parts/seeed_xiao_samd21.yml

@@ -0,0 +1,37 @@
+# https://wiki.seeedstudio.com/Seeeduino-XIAO/
+# Synthetic pin numbers: left header top to bottom, then right header bottom to top.
+id: seeed_xiao_samd21
+category: module
+placement: footprint
+straddle: true
+pins:
+  - {num: 1, name: D0, type: gpio, aliases: [A0], max_voltage: 3.3, output_capable: true}
+  - {num: 2, name: D1, type: gpio, aliases: [A1], max_voltage: 3.3, output_capable: true}
+  - {num: 3, name: D2, type: gpio, aliases: [A2], max_voltage: 3.3, output_capable: true}
+  - {num: 4, name: D3, type: gpio, aliases: [A3], max_voltage: 3.3, output_capable: true}
+  - {num: 5, name: D4, type: gpio, aliases: [A4, SDA], max_voltage: 3.3, output_capable: true}
+  - {num: 6, name: D5, type: gpio, aliases: [A5, SCL], max_voltage: 3.3, output_capable: true}
+  - {num: 7, name: D6, type: gpio, aliases: [A6, TX], max_voltage: 3.3, output_capable: true}
+  - {num: 8, name: D7, type: gpio, aliases: [A7, RX], max_voltage: 3.3, output_capable: true}
+  - {num: 9, name: D8, type: gpio, aliases: [A8, SCK], max_voltage: 3.3, output_capable: true}
+  - {num: 10, name: D9, type: gpio, aliases: [A9, MISO], max_voltage: 3.3, output_capable: true}
+  - {num: 11, name: D10, type: gpio, aliases: [A10, MOSI], max_voltage: 3.3, output_capable: true}
+  - {num: 12, name: 3V3, type: power}
+  - {num: 13, name: GND, type: ground}
+  - {num: 14, name: 5V, type: power}
+footprint:
+  "1": [0, 0]
+  "2": [1, 0]
+  "3": [2, 0]
+  "4": [3, 0]
+  "5": [4, 0]
+  "6": [5, 0]
+  "7": [6, 0]
+  "8": [6, 6]
+  "9": [5, 6]
+  "10": [4, 6]
+  "11": [3, 6]
+  "12": [2, 6]
+  "13": [1, 6]
+  "14": [0, 6]
+render: {shape: module, label: XIAO SAMD21, size_mm: [21, 17.5], fill: "#2C2C2A", stroke: "#171715", text_color: "#FFFFFF"}

data/data/parts/shillehtek_mb102_4pin.yml

@@ -0,0 +1,23 @@
+# ShillehTek four-contact underside variant only. Other MB102 modules can differ.
+# No fixed footprint: the four rail holes must be supplied from the actual module and breadboard.
+id: shillehtek_mb102_4pin
+category: power
+placement: footprint
+datasheet_url: https://shillehtek.com/blogs/shillehtek-product-manuals/mb102-breadboard-power-supply-3-3v-5v
+pins:
+  - {num: LP, name: LEFT_POS, type: power, mount: rail}
+  - {num: LG, name: LEFT_GND, type: ground, mount: rail}
+  - {num: RP, name: RIGHT_POS, type: power, mount: rail}
+  - {num: RG, name: RIGHT_GND, type: ground, mount: rail}
+internal: [[LEFT_GND, RIGHT_GND]]
+attributes:
+  master: ["on", "off"]
+  left: ["v5", "v3_3", "off"]
+  right: ["v5", "v3_3", "off"]
+required_attributes: [master, left, right]
+provides:
+  - {positive: LEFT_POS, negative: LEFT_GND, voltage: 5, when: {master: "on", left: "v5"}}
+  - {positive: LEFT_POS, negative: LEFT_GND, voltage: 3.3, when: {master: "on", left: "v3_3"}}
+  - {positive: RIGHT_POS, negative: RIGHT_GND, voltage: 5, when: {master: "on", right: "v5"}}
+  - {positive: RIGHT_POS, negative: RIGHT_GND, voltage: 3.3, when: {master: "on", right: "v3_3"}}
+render: {shape: generic, label: ShillehTek MB102 (logical)}

data/data/parts/slide_switch_spst.yml

@@ -0,0 +1,8 @@
+id: slide_switch_spst
+category: switch
+placement: leads
+pins:
+  - {num: 1, name: "1", type: passive}
+  - {num: 2, name: "2", type: passive}
+switch: [[1, 2]]
+render: {shape: generic}

data/data/parts/sparkfun_pro_micro_5v.yml

@@ -0,0 +1,58 @@
+# https://cdn.sparkfun.com/datasheets/Dev/Arduino/Boards/ProMicro16MHzv1.pdf
+# Synthetic pin numbers: left header top to bottom, then right header bottom to top.
+id: sparkfun_pro_micro_5v
+category: module
+placement: footprint
+straddle: true
+pins:
+  - {num: 1, name: D1, type: gpio, aliases: [TXO], max_voltage: 5, output_capable: true}
+  - {num: 2, name: D0, type: gpio, aliases: [RXI], max_voltage: 5, output_capable: true}
+  - {num: 3, name: GND1, type: ground, aliases: [GND]}
+  - {num: 4, name: GND2, type: ground}
+  - {num: 5, name: D2, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 6, name: D3, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 7, name: D4, type: gpio, aliases: [A6], max_voltage: 5, output_capable: true}
+  - {num: 8, name: D5, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 9, name: D6, type: gpio, aliases: [A7], max_voltage: 5, output_capable: true}
+  - {num: 10, name: D7, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 11, name: D8, type: gpio, aliases: [A8], max_voltage: 5, output_capable: true}
+  - {num: 12, name: D9, type: gpio, aliases: [A9], max_voltage: 5, output_capable: true}
+  - {num: 13, name: D10, type: gpio, aliases: [A10], max_voltage: 5, output_capable: true}
+  - {num: 14, name: D16, type: gpio, aliases: [MOSI], max_voltage: 5, output_capable: true}
+  - {num: 15, name: D14, type: gpio, aliases: [MISO], max_voltage: 5, output_capable: true}
+  - {num: 16, name: D15, type: gpio, aliases: [SCK], max_voltage: 5, output_capable: true}
+  - {num: 17, name: A0, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 18, name: A1, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 19, name: A2, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 20, name: A3, type: gpio, max_voltage: 5, output_capable: true}
+  - {num: 21, name: VCC, type: power}
+  - {num: 22, name: RST, type: reset}
+  - {num: 23, name: GND3, type: ground}
+  - {num: 24, name: RAW, type: power}
+internal: [[GND1, GND2], [GND2, GND3]]
+footprint:
+  "1": [0, 0]
+  "2": [1, 0]
+  "3": [2, 0]
+  "4": [3, 0]
+  "5": [4, 0]
+  "6": [5, 0]
+  "7": [6, 0]
+  "8": [7, 0]
+  "9": [8, 0]
+  "10": [9, 0]
+  "11": [10, 0]
+  "12": [11, 0]
+  "13": [11, 6]
+  "14": [10, 6]
+  "15": [9, 6]
+  "16": [8, 6]
+  "17": [7, 6]
+  "18": [6, 6]
+  "19": [5, 6]
+  "20": [4, 6]
+  "21": [3, 6]
+  "22": [2, 6]
+  "23": [1, 6]
+  "24": [0, 6]
+render: {shape: module, label: SparkFun Pro Micro 5V, size_mm: [33, 18], fill: "#2C2C2A", stroke: "#171715", text_color: "#FFFFFF"}

data/data/parts/transistor.yml

@@ -1,5 +1,4 @@
 id: transistor
-aliases: [2N3904]
 category: transistor
 transistor_polarity: NPN
 placement: leads

data/data/parts/ua7805.yml

@@ -0,0 +1,10 @@
+# TI uA7805 TO-220 (KC), front view: input, common, output.
+# https://www.ti.com/lit/ds/symlink/ua78.pdf
+id: ua7805
+category: regulator
+placement: leads
+pins:
+  - {num: 1, name: INPUT, type: power}
+  - {num: 2, name: GND, type: ground}
+  - {num: 3, name: OUTPUT, type: power}
+render: {shape: generic}

data/data/parts/uln2003a.yml

@@ -0,0 +1,23 @@
+# https://www.ti.com/lit/ds/symlink/uln2003a.pdf
+id: uln2003a
+category: ic
+placement: dip
+package: {pins: 16}
+pins:
+  - {num: 1, name: 1B, type: input}
+  - {num: 2, name: 2B, type: input}
+  - {num: 3, name: 3B, type: input}
+  - {num: 4, name: 4B, type: input}
+  - {num: 5, name: 5B, type: input}
+  - {num: 6, name: 6B, type: input}
+  - {num: 7, name: 7B, type: input}
+  - {num: 8, name: E, type: ground}
+  - {num: 9, name: COM, type: passive}
+  - {num: 10, name: 7C, type: open_drain}
+  - {num: 11, name: 6C, type: open_drain}
+  - {num: 12, name: 5C, type: open_drain}
+  - {num: 13, name: 4C, type: open_drain}
+  - {num: 14, name: 3C, type: open_drain}
+  - {num: 15, name: 2C, type: open_drain}
+  - {num: 16, name: 1C, type: open_drain}
+render: {shape: dip, label: ULN2003A}

data/data/parts/wp154a4sureqbfzgc.yml

@@ -0,0 +1,11 @@
+# Kingbright 5 mm RGB LED, common cathode; 1.27 mm lead pitch requires lead forming for a breadboard.
+# https://www.kingbrightusa.com/images/catalog/spec/WP154A4SUREQBFZGC.pdf
+id: wp154a4sureqbfzgc
+category: display
+placement: leads
+pins:
+  - {num: 1, name: RED, type: input}
+  - {num: 2, name: CATHODE, type: passive}
+  - {num: 3, name: BLUE, type: input}
+  - {num: 4, name: GREEN, type: input}
+render: {shape: rgb_led_5mm, label: RGB LED}