bookshop 0.0.1

data/lib/bookshop/generators/bookshop/project/tools/xsl/1.76.1/install.sh

@@ -0,0 +1,977 @@
+#!/bin/bash
+# $Id: install.sh 7942 2008-03-26 06:08:08Z xmldoc $
+# $Source$ #
+
+# install.sh - Set up user environment for a XML/XSLT distribution
+
+# This is as an interactive installer for updating your
+# environment to use an XML/XSLT distribution such as the DocBook
+# XSL Stylesheets. Its main purpose is to configure your
+# environment with XML catalog data and schema "locating rules"
+# data provided in the XML/XSLT distribution.
+#
+# Although this installer was created for the DocBook project, it
+# is a general-purpose tool that can be used with any XML/XSLT
+# distribution that provides XML/SGML catalogs and locating rules.
+#
+# This script is mainly intended to make things easier for you if
+# you want to install a particular XML/XSLT distribution that has
+# not (yet) been packaged for your OS distro (Debian, Fedora,
+# whatever), or to use "snapshot" or development releases 
+#
+# It works by updating your shell startup file (e.g., .bashrc and
+# .cshrc) and .emacs file and by finding or creating a writable
+# CatalogManager.properties file to update.
+#
+# It makes backup copies of any files it touches, and also
+# generates a uninstall.sh script for reverting its changes.
+#
+# In the same directory where it is located, it expects to find
+# the following four files:
+#   - locatingrules.xml
+#   - catalog.xml
+#   - catalog
+#   - .urilist
+# And if it's unable to locate a CatalogManager.properties file in
+# your environment, it expects to find an "example" one in the
+# same directory as itself, which it copies over to your
+# ~/.resolver directory.
+#
+# If the distribution contains any executables, change the value
+# of the thisBinDir to a colon-separated list of the pathnames of
+# the directories that contain those executables.
+
+# mydir is the "canonical" absolute pathname for install.sh
+mydir=$(cd -P $(dirname $0) && pwd -P) || exit 1
+
+thisLocatingRules=$mydir/locatingrules.xml
+thisXmlCatalog=$mydir/catalog.xml
+thisSgmlCatalog=$mydir/catalog
+
+# .urilist file contains a list of pairs of local pathnames and
+# URIs to test for catalog resolution
+thisUriList=$mydir/.urilist
+exampleCatalogManager=$mydir/.CatalogManager.properties.example
+thisCatalogManager=$HOME/.resolver/CatalogManager.properties
+
+# thisBinDir directory is a colon-separated list of the pathnames
+# to all directories that contain executables provided with the
+# distribution (for example, the DocBook XSL Stylesheets
+# distribution contains a "docbook-xsl-update" convenience script
+# for rsync'ing up to the latest docbook-xsl snapshot). The
+# install.sh script adds the value of thisBinDir to your PATH
+# environment variable
+thisBinDir=$mydir/tools/bin
+
+emit_message() {
+  echo "$1" 1>&2
+}
+
+if [ ! "${*#--batch}" = "$*" ]; then
+  batchmode="Yes";
+else
+  batchmode="No";
+  emit_message
+  if [ ! "$1" = "--test" ]; then 
+    emit_message "NOTE: For non-interactive installs/uninstalls, use --batch"
+    if [ ! "$1" = "--uninstall" ]; then
+      emit_message
+    fi
+  fi
+fi
+
+osName="Unidentified"
+if uname -s | grep -qi "cygwin"; then
+  osName="Cygwin"
+fi
+
+classPathSeparator=":"
+if [ "$osName" = "Cygwin" ]; then
+  thisJavaXmlCatalog=$(cygpath -m $thisXmlCatalog)
+  classPathSeparator=";"
+else
+  thisJavaXmlCatalog=$thisXmlCatalog
+fi
+
+main() {
+  removeOldFiles
+  checkRoot
+  updateCatalogManager
+  checkForResolver
+  writeDotFiles
+  updateUserStartupFiles
+  updateUserDotEmacs
+  writeUninstallFile
+  writeTestFile
+  printExitMessage
+}
+
+removeOldFiles() {
+  rm -f $mydir/.profile.incl
+  rm -f $mydir/.cshrc.incl
+  rm -f $mydir/.emacs.el
+}
+
+checkRoot() {
+  if [ $(id -u)  == "0" ]; then
+    cat 1>&2 <<EOF
+
+WARNING: This install script is meant to be run as a non-root
+         user, but you are running it as root.
+
+EOF
+    read -s -n1 -p "Are you sure you want to continue? [No] "
+    emit_message "$REPLY"
+    case $REPLY in
+      [yY])
+      emit_message
+      ;;
+      *) emit_message "OK, exiting without making changes."
+      exit
+      ;;
+    esac
+  fi
+  return 0
+}
+
+updateCatalogManager() {
+
+  #  - finds or creates a writable CatalogManager.properties file
+  #
+  #  - adds the catalog.xml file for this distribution to the
+  #    CatalogManager.properties file found
+
+  if [ -z "$CLASSPATH" ]; then
+    cat 1>&2 <<EOF
+
+NOTE: There is no CLASSPATH variable set in your environment.
+      No attempt was made to find a CatalogManager.properties
+      file.  Using $thisCatalogManager instead
+EOF
+  else
+    # split CLASSPATH in a list of pathnames by replacing all separator
+    # characters with spaces
+    if [ "$osName" = "Cygwin" ]; then
+      pathnames=$(echo $CLASSPATH | tr ";" " ")
+    else
+      pathnames=$(echo $CLASSPATH | tr ":" " ")
+    fi
+    for path in $pathnames; do
+    if [ "$osName" = "Cygwin" ]; then
+      path=$(cygpath -u $path)
+    fi
+      # strip out trailing slash from pathname
+      path=$(echo $path | sed 's/\/$//')
+      # find CatalogManager.properties file
+      if [ -f $path/CatalogManager.properties ];
+      then
+        existingCatalogManager=$path/CatalogManager.properties
+        break
+      fi
+    done
+  fi
+  # end of CLASSPATH check
+
+  if [ -w "$existingCatalogManager" ]; then
+    # existing CatalogManager.properties was found and it is
+    # writable, so use it
+    myCatalogManager=$existingCatalogManager
+  else
+    if [ -f "$existingCatalogManager" ]; then
+      # a non-writable CatalogManager.properties exists, so emit a
+      # note saying that it won't be used
+      cat 1>&2 <<EOF
+NOTE: $existingCatalogManager file found,
+      but you don't have permission to write to it.
+      Will instead use:
+      $thisCatalogManager
+EOF
+    else
+      # CLASSPATH is set, but no CatalogManager.properties found
+      if [ -n "$CLASSPATH" ]; then
+        cat 1>&2 <<EOF
+NOTE: No CatalogManager.properties found from CLASSPATH.
+      Will instead use:
+      $thisCatalogManager
+EOF
+      fi
+    fi
+    if [ "$batchmode" = "Yes" ]; then
+      emit_message
+    fi
+    # end of check for existing writable CatalogManager.properties
+
+    if [ -f $thisCatalogManager ]; then
+      myCatalogManager=$thisCatalogManager
+    else
+      REPLY=""
+      if [ ! "$batchmode" = "Yes" ]; then
+        emit_message
+        read -s -n1 -p "Create $thisCatalogManager file? [Yes] "
+        emit_message "$REPLY"
+        emit_message
+      fi
+      case $REPLY in
+        [nNqQ])
+        emitNoChangeMsg
+        ;;
+        *)
+        if [ ! -d "${thisCatalogManager%/*}" ]; then
+          mkdir -p ${thisCatalogManager%/*}
+        fi
+        cp $mydir/.CatalogManager.properties.example $thisCatalogManager || exit 1
+        emit_message "NOTE: Created the following file:"
+        emit_message "      $thisCatalogManager"
+        myCatalogManager=$thisCatalogManager
+        ;;
+      esac
+      # end of creating "private" CatalogManager.properties
+    fi
+    # end of check for "private" CatalogManager.properties
+  fi
+  # end of check finding/creating writable CatalogManager.properties
+
+  if [ -n "$myCatalogManager" ]; then
+    etcXmlCatalog=
+    catalogsLine=$(grep "^catalogs=" $myCatalogManager)
+    if [ -f /etc/xml/catalog ] && [ "$osName" != "Cygwin" ] \
+      && [ "${catalogsLine#*/etc/xml/catalog*}" = "$catalogsLine" ]; then
+      cat 1>&2 <<EOF
+
+WARNING: /etc/xml/catalog exists but was not found in:
+         $myCatalogManager
+         If /etc/xml/catalog file has content, you probably
+         should reference it in:
+         $myCatalogManager
+         This installer can automatically add it for you,
+         but BE WARNED that once it has been added, the
+         uninstaller for this distribution CANNOT REMOVE IT
+         automatically during uninstall. If you no longer want
+         it included, you will need to remove it manually.
+
+EOF
+      REPLY=""
+      if [ ! "$batchmode" = "Yes" ]; then
+        read -s -n1 -p "Add /etc/xml/catalog to $myCatalogManager? [Yes] "
+        emit_message "$REPLY"
+      fi
+      case $REPLY in
+        [nNqQ])
+        emit_message
+        ;;
+        *)
+        etcXmlCatalog=/etc/xml/catalog
+        ;;
+      esac
+    fi
+
+    catalogBackup="$myCatalogManager.$$.bak"
+    if [ ! -w "${myCatalogManager%/*}" ]; then
+      emit_message
+      emit_message "WARNING: ${myCatalogManager%/*} directory is not writable."
+      emit_message
+      emitNoChangeMsg
+    else
+      REPLY=""
+      if [ ! "$batchmode" = "Yes" ]; then
+        emit_message
+        emit_message "Add $thisJavaXmlCatalog"
+        read -s -n1 -p "to $myCatalogManager file? [Yes] "
+        emit_message "$REPLY"
+        emit_message
+      fi
+      case $REPLY in
+        [nNqQ])
+        emitNoChangeMsg
+        ;;
+        *)
+        if [ "$catalogsLine" ] ; then
+          if [ "${catalogsLine#*$thisJavaXmlCatalog*}" != "$catalogsLine" ]; then
+            emit_message "NOTE: $thisJavaXmlCatalog"
+            emit_message "      already in:"
+            emit_message "      $myCatalogManager"
+          else
+            mv $myCatalogManager $catalogBackup || exit 1
+            sed "s#^catalogs=\(.*\)\$#catalogs=$thisJavaXmlCatalog;\1;$etcXmlCatalog#" $catalogBackup \
+            | sed 's/;\+/;/' | sed 's/;$//' > $myCatalogManager || exit 1
+            emit_message "NOTE: Successfully updated the following file:"
+            emit_message "      $myCatalogManager"
+            emit_message "      Backup written to:"
+            emit_message "      $catalogBackup"
+          fi
+        else
+          mv $myCatalogManager $catalogBackup || exit 1
+          cp $catalogBackup $myCatalogManager
+          echo "catalogs=$thisJavaXmlCatalog;$etcXmlCatalog" \
+          | sed 's/;\+/;/' | sed 's/;$//' >> $myCatalogManager || exit 1
+          emit_message "NOTE: \"catalogs=\" line added to $myCatalogManager."
+          emit_message "      Backup written to $catalogBackup"
+        fi
+        ;;
+      esac
+      # end of backing up and updating CatalogManager.properties
+    fi
+  fi
+  # end of CatalogManager.properties updates
+
+  if [ "$osName" = "Cygwin" ]; then
+    myCatalogManager=$(cygpath -m $myCatalogManager)
+  fi
+  return 0
+}
+
+writeDotFiles() {
+  while read; do
+    echo "$REPLY" >> $mydir/.profile.incl
+  done <<EOF
+# $thisBinDir is not in PATH, so add it
+if [ "\${PATH#*$thisBinDir*}" = "\$PATH" ]; then
+  PATH="$thisBinDir:\$PATH"
+  export PATH
+fi
+if [ -z "\$XML_CATALOG_FILES" ]; then
+  XML_CATALOG_FILES="$thisXmlCatalog"
+else
+  # $thisXmlCatalog is not in XML_CATALOG_FILES, so add it
+  if [ "\${XML_CATALOG_FILES#*$thisXmlCatalog*}" = "\$XML_CATALOG_FILES" ]; then
+    XML_CATALOG_FILES="$thisXmlCatalog \$XML_CATALOG_FILES"
+  fi
+fi
+# /etc/xml/catalog exists but is not in XML_CATALOG_FILES, so add it
+if [ -f /etc/xml/catalog ] && \
+  [ "\${XML_CATALOG_FILES#*/etc/xml/catalog*}" = "\$XML_CATALOG_FILES" ]; then
+  XML_CATALOG_FILES="\$XML_CATALOG_FILES /etc/xml/catalog"
+fi
+export XML_CATALOG_FILES
+
+if [ -z "\$SGML_CATALOG_FILES" ]; then
+  SGML_CATALOG_FILES="$thisSgmlCatalog"
+else
+  # $thisSgmlCatalog is not in SGML_CATALOG_FILES, so add it
+  if [ "\${SGML_CATALOG_FILES#*$thisSgmlCatalog}" = "\$SGML_CATALOG_FILES" ]; then
+    SGML_CATALOG_FILES="$thisSgmlCatalog:\$SGML_CATALOG_FILES"
+  fi
+fi
+# /etc/sgml/catalog exists but is not in SGML_CATALOG_FILES, so add it
+if [ -f /etc/sgml/catalog ] && \
+  [ "\${SGML_CATALOG_FILES#*/etc/sgml/catalog*}" = "\$SGML_CATALOG_FILES" ]; then
+  SGML_CATALOG_FILES="\$SGML_CATALOG_FILES:/etc/sgml/catalog"
+fi
+export SGML_CATALOG_FILES
+EOF
+
+while read; do
+  echo "$REPLY" >> $mydir/.cshrc.incl
+done <<EOF
+# $thisBinDir is not in PATH, so add it
+if ( "\\\`echo \$PATH | grep -v $thisBinDir\\\`" != "" ) then
+  setenv PATH "$thisBinDir:\$PATH"
+endif
+if ( ! $\?XML_CATALOG_FILES ) then
+  setenv XML_CATALOG_FILES "$thisXmlCatalog"
+# $thisXmlCatalog is not in XML_CATALOG_FILES, so add it
+else if ( "\\\`echo \$XML_CATALOG_FILES | grep -v $thisXmlCatalog\\\`" != "" ) then
+  setenv XML_CATALOG_FILES "$thisXmlCatalog \$XML_CATALOG_FILES"
+endif
+endif
+# /etc/xml/catalog exists but is not in XML_CATALOG_FILES, so add it
+if ( -f /etc/xml/catalog && "\\\`echo \$XML_CATALOG_FILES | grep -v /etc/xml/catalog\\\`" != "" ) then
+  setenv XML_CATALOG_FILES "\$XML_CATALOG_FILES /etc/xml/catalog"
+endif
+
+endif
+if ( ! $\?SGML_CATALOG_FILES ) then
+  setenv SGML_CATALOG_FILES "$thisSgmlCatalog"
+else if ( "\\\`echo \$SGML_CATALOG_FILES | grep -v $thisSgmlCatalog\\\`" != "" ) then
+  setenv SGML_CATALOG_FILES "$thisSgmlCatalog:\$SGML_CATALOG_FILES"
+endif
+endif
+# /etc/SGML/catalog exists but is not in SGML_CATALOG_FILES, so add it
+if ( -f /etc/sgml/catalog && "\\\`echo \$SGML_CATALOG_FILES | grep -v /etc/sgml/catalog\\\`" != "" ) then
+  setenv SGML_CATALOG_FILES {\$SGML_CATALOG_FILES}:/etc/sgml/catalog
+endif
+EOF
+
+if [ -n "$myCatalogManager" ]; then
+  myCatalogManagerDir=${myCatalogManager%/*}
+  while read; do
+    echo "$REPLY" >> $mydir/.profile.incl
+  done <<EOF
+
+
+if [ -z "\$CLASSPATH" ]; then
+  CLASSPATH="$myCatalogManagerDir"
+else
+  # $myCatalogManagerDir is not in CLASSPATH, so add it
+  if [ "\${CLASSPATH#*$myCatalogManagerDir*}" = "\$CLASSPATH" ]; then
+    CLASSPATH="$myCatalogManagerDir$classPathSeparator\$CLASSPATH"
+  fi
+fi
+export CLASSPATH
+EOF
+
+  while read; do
+    echo "$REPLY" >> $mydir/.cshrc.incl
+  done <<EOF
+
+
+if ( ! $\?CLASSPATH ) then
+  setenv CLASSPATH "$myCatalogManagerDir"
+# $myCatalogManagerDir is not in CLASSPATH, so add it
+else if ( "\\\`echo \$CLASSPATH | grep -v $myCatalogManagerDir\\\`" != "" ) then
+  setenv CLASSPATH "$myCatalogManagerDir$classPathSeparator\$CLASSPATH"
+endif
+endif
+EOF
+
+fi
+
+while read; do
+  echo "$REPLY" >> $mydir/.emacs.el
+done <<EOF
+(add-hook
+  'nxml-mode-hook
+  (lambda ()
+    (setq rng-schema-locating-files-default
+          (append '("$thisLocatingRules")
+                  rng-schema-locating-files-default ))))
+EOF
+
+return 0
+}
+
+updateUserStartupFiles() {
+  if [ ! "$batchmode" = "Yes" ]; then
+  cat 1>&2 <<EOF
+
+NOTE: To source your environment correctly for using the catalog
+      files in this distribution, you need to update one or more
+      of your shell startup files. This installer can
+      automatically make the necessary changes. Or, if you prefer,
+      you can make the changes manually.
+
+EOF
+  else
+    emit_message
+  fi
+
+  # if running csh or tcsh, target .cshrc and .tcshrc files for
+  # update; otherwise, target .bash_* and .profiles
+
+  parent=$(ps -p $PPID | grep "/")
+  if [ "${parent#*csh}" != "$parent" ] || [ "${parent#*tcsh}" != "$parent" ]; then
+    myStartupFiles=".cshrc .tcshrc"
+    appendLine="source $mydir/.cshrc.incl"
+  else
+    myStartupFiles=".bash_profile .bash_login .profile .bashrc"
+    appendLine=". $mydir/.profile.incl"
+  fi
+
+  for file in $myStartupFiles; do
+    if [ -f "$HOME/$file" ]; then
+      dotFileBackup=$HOME/$file.$$.bak
+      REPLY=""
+      if [ ! "$batchmode" = "Yes" ]; then
+        read -s -n1 -p "Update $HOME/$file? [Yes] "
+        emit_message "$REPLY"
+      fi
+      case $REPLY in
+        [nNqQ])
+        cat 1>&2 <<EOF
+
+NOTE: No change made to $HOME/$file. You either need
+      to add the following line to it, or manually source
+      the shell environment for this distribution each
+      time you want use it.
+
+$appendLine
+
+EOF
+        ;;
+        *)
+        lineExists="$(grep "$appendLine" $HOME/$file )"
+        if [ ! "$lineExists" ]; then
+          mv $HOME/$file $dotFileBackup     || exit 1
+          cp $dotFileBackup $HOME/$file     || exit 1
+          echo "$appendLine" >> $HOME/$file || exit 1
+          cat 1>&2 <<EOF
+NOTE: Successfully updated the following file:
+      $HOME/$file 
+      Backup written to:
+      $dotFileBackup
+
+EOF
+        else
+          cat 1>&2 <<EOF
+NOTE: The following file already contains information for this
+      distribution, so I did not update it.
+      $HOME/$file
+
+EOF
+        fi
+        ;;
+      esac
+    fi
+  done
+  if [ -z "$dotFileBackup" ]; then
+    if [ ! "$batchmode" = "Yes" ]; then
+      emit_message
+    fi
+    cat 1>&2 <<EOF
+NOTE: No shell startup files updated. You can source the
+      environment for this distribution manually, each time you
+      want to use it, by typing the following.
+
+$appendLine
+
+EOF
+  fi
+}
+
+updateUserDotEmacs() {
+  if [ -f $thisLocatingRules ]; then
+  cat 1>&2 <<EOF
+
+NOTE: This distribution includes a "schema locating rules" file
+      for Emacs/nXML.  To use it, you should update either your
+      .emacs or .emacs.el file.  This installer can automatically
+      make the necessary changes. Or, if you prefer, you can make
+      the changes manually.
+
+EOF
+
+  emacsAppendLine="(load-file \"$mydir/.emacs.el\")"
+  myEmacsFile=
+  for file in .emacs .emacs.el; do
+    if [ -f "$HOME/$file" ]; then
+      myEmacsFile=$HOME/$file
+      break
+    fi
+  done
+  if [ ! -f "$myEmacsFile" ]; then
+    REPLY=""
+    if [ ! "$batchmode" = "Yes" ]; then
+      read -s -n1 -p "No .emacs or .emacs.el file. Create one? [No] "
+      emit_message "$REPLY"
+      emit_message
+    fi
+    case $REPLY in
+      [yY])
+      myEmacsFile=$HOME/.emacs
+      touch $myEmacsFile
+      ;;
+      *)
+      cat 1>&2 <<EOF
+NOTE: No Emacs changes made. To use this distribution with,
+      Emacs/nXML, you can create a .emacs file and manually add
+      the following line to it, or you can run it as a command
+      within Emacs.
+
+$emacsAppendLine
+
+EOF
+      ;;
+    esac
+  fi
+  if [ -n "$myEmacsFile" ]; then
+    REPLY=""
+    if [ ! "$batchmode" = "Yes" ]; then
+      read -s -n1 -p  "Update $myEmacsFile? [Yes] "
+      emit_message "$REPLY"
+      emit_message
+    fi
+    case $REPLY in
+      [nNqQ])
+      cat 1>&2 <<EOF
+
+NOTE: No change made to $myEmacsFile. To use this distribution
+      with Emacs/nXML, you can manually add the following line
+      to your $myEmacsFile, or you can run it as a command
+      within Emacs.
+
+$emacsAppendLine
+
+EOF
+      ;;
+      *)
+      lineExists="$(grep "$emacsAppendLine" $myEmacsFile)"
+      if [ ! "$lineExists" ]; then
+        dotEmacsBackup=$myEmacsFile.$$.bak
+        mv $myEmacsFile $dotEmacsBackup    || exit 1
+        cp $dotEmacsBackup $myEmacsFile    || exit 1
+        echo "$emacsAppendLine" >> $myEmacsFile || exit 1
+        cat 1>&2 <<EOF
+NOTE: Successfully updated the following file:
+      $myEmacsFile
+      Backup written to:
+      $dotEmacsBackup
+EOF
+      else
+        cat 1>&2 <<EOF
+
+NOTE: The following file already contains information for this
+      distribution, so I did not update it.
+      $myEmacsFile
+
+EOF
+      fi
+      ;;
+    esac
+  fi
+fi
+}
+
+uninstall() {
+  if [ ! "$batchmode" = "Yes" ]; then
+  cat 1>&2 <<EOF
+
+NOTE: To "uninstall" this distribution, the changes made to your
+      CatalogManagers.properties, startup files, and/or .emacs
+      file need to be reverted. This uninstaller can automatically
+      revert them.  Or, if you prefer, you can revert them manually.
+
+EOF
+  fi
+
+  if [ "$osName" = "Cygwin" ]; then
+    thisXmlCatalog=$thisJavaXmlCatalog
+  fi
+
+  # make "escaped" version of PWD to use with sed and grep
+  escapedPwd=$(echo $mydir | sed "s#/#\\\\\/#g")
+
+  # check to see if a non-empty value for catalogManager was fed
+  # to uninstaller.
+  if [ -n ${1#--catalogManager=} ]; then
+    myCatalogManager=${1#--catalogManager=}
+    catalogBackup="$myCatalogManager.$$.bak"
+    catalogsLine=$(grep "^catalogs=" $myCatalogManager)
+    if [ "$catalogsLine" ] ; then
+      if [ "${catalogsLine#*$thisXmlCatalog*}" != "$catalogsLine" ]; then
+        REPLY=""
+        if [ ! "$batchmode" = "Yes" ]; then
+          read -s -n1 -p "Revert $myCatalogManager? [Yes] "
+          emit_message "$REPLY"
+        fi
+        case $REPLY in
+          [nNqQ]*)
+          cat 1>&2 <<EOF
+
+NOTE: No change made to $myCatalogManager. You need to manually
+      remove the following path from the "catalog=" line.
+
+          $thisXmlCatalog
+
+EOF
+          ;;
+          *)
+          mv $myCatalogManager $catalogBackup || exit 1
+          sed "s#^catalogs=\(.*\)$thisXmlCatalog\(.*\)\$#catalogs=\1\2#" $catalogBackup \
+          | sed 's/;\+/;/' | sed 's/;$//' | sed 's/=;/=/' > $myCatalogManager || exit 1
+          cat 1>&2 <<EOF
+NOTE: Successfully updated the following file:
+      $myCatalogManager
+      Backup written to:
+      $catalogBackup
+
+EOF
+          ;;
+        esac
+      else
+        emit_message "NOTE: No data for this distribution found in:"
+        emit_message "       $myCatalogManager"
+        emit_message
+      fi
+    else
+      cat 1>&2 <<EOF
+NOTE: No data for this distribution was found in the following
+      file, so I did not revert it.
+      $myCatalogManager
+EOF
+    fi
+  fi
+
+  if [ -n "$myEmacsFile" ]; then 
+    # check to see if a non-empty value for --dotEmacs file was fed
+    # to uninstaller.
+    if [ -n ${2#--dotEmacs=} ]; then
+      myEmacsFile=${2#--dotEmacs=}
+      revertLine="(load-file \"$escapedPwd\/\.emacs\.el\")"
+      loadLine="$(grep "$revertLine" "$myEmacsFile")"
+      if [ -n "$loadLine" ]; then
+        emit_message
+        REPLY=""
+        if [ ! "$batchmode" = "Yes" ]; then
+          read -s -n1 -p "Revert $myEmacsFile? [Yes] "
+          emit_message "$REPLY"
+        fi
+        case $REPLY in
+          [nNqQ]*)
+          cat 1>&2 <<EOF
+
+NOTE: No change made to $myEmacsFile. You need to manually
+remove the following line.
+
+(load-file \"$mydir/.emacs.el\")
+
+EOF
+          ;;
+          *)
+          dotEmacsBackup=$myEmacsFile.$$.bak
+          sed -e "/$revertLine/d" -i".$$.bak" $myEmacsFile  || exit 1
+          cat 1>&2 <<EOF
+NOTE: successfully reverted the following file:
+      $myEmacsFile
+      Backup written to:
+      $dotEmacsBackup
+
+EOF
+          ;;
+        esac
+      else
+        emit_message "NOTE: No data for this distribution found in:"
+        emit_message "      $myEmacsFile"
+      fi
+    fi
+  fi
+
+  # check all startup files
+  myStartupFiles=".bash_profile .bash_login .profile .bashrc .cshrc .tcshrc"
+  for file in $myStartupFiles; do
+    if [ -e "$HOME/$file" ]; then
+      case $file in
+        .tcshrc|.cshrc)
+        revertLine="source $mydir/.cshrc.incl"
+        revertLineEsc="source $escapedPwd\/\.cshrc\.incl"
+        ;;
+        *)
+        revertLine=". $mydir/.profile.incl"
+        revertLineEsc="\. $escapedPwd\/\.profile\.incl"
+        ;;
+      esac
+      lineExists="$(grep "$revertLineEsc" $HOME/$file )"
+      if [ "$lineExists" ]; then
+        REPLY=""
+        if [ ! "$batchmode" = "Yes" ]; then
+          read -s -n1 -p "Update $HOME/$file? [Yes] "
+          emit_message "$REPLY"
+        fi
+        case $REPLY in
+          [nNqQ]*)
+          cat 1>&2 <<EOF
+
+NOTE: No change made to $HOME/$file. You need to manually remove
+      the following line from it.
+
+ $revertLine
+
+EOF
+          ;;
+          *)
+          dotFileBackup=$HOME/$file.$$.bak
+          sed -e "/$revertLineEsc/d" -i".$$.bak" $HOME/$file  || exit 1
+          cat 1>&2 <<EOF
+NOTE: Successfully updated the following file:
+      $HOME/$file
+      Backup written to:
+      $dotFileBackup
+
+EOF
+          ;;
+        esac
+      else
+        emit_message "NOTE: No data for this distribution found in:"
+        emit_message "      $HOME/$file"
+        emit_message
+      fi
+    fi
+  done
+  removeOldFiles
+  emit_message "Done. Deleted uninstall.sh file."
+  rm -f $mydir/test.sh      || exit 1
+  rm -f $mydir/uninstall.sh || exit 1
+}
+
+writeUninstallFile() {
+  uninstallFile=$mydir/uninstall.sh
+  echo '#!/bin/bash'                               > $uninstallFile || exit 1
+  echo 'mydir=$(cd -P $(dirname $0) && pwd -P)'   >> $uninstallFile || exit 1
+  echo "\$mydir/install.sh \\"                    >> $uninstallFile || exit 1
+  echo "  --uninstall \\"                         >> $uninstallFile || exit 1
+  echo "  --catalogManager=$myCatalogManager \\"  >> $uninstallFile || exit 1
+  echo "  --dotEmacs='$myEmacsFile' \\"           >> $uninstallFile || exit 1
+  echo '  $@'                                     >> $uninstallFile || exit 1
+  chmod 755 $uninstallFile || exit 1
+}
+
+writeTestFile() {
+  testFile=$mydir/test.sh
+  echo "#!/bin/bash"                                > $testFile || exit 1
+  echo 'mydir=$(cd -P $(dirname $0) && pwd -P)'    >> $testFile || exit 1
+  echo '$mydir/install.sh --test'                  >> $testFile || exit 1
+  chmod 755 $testFile || exit 1
+}
+
+printExitMessage() {
+  cat 1>&2 <<EOF
+To source your shell environment for this distribution, type the
+following:
+
+$appendLine
+
+EOF
+}
+
+checkForResolver() {
+  resolverResponse="$(java org.apache.xml.resolver.apps.resolver uri -u foo 2>/dev/null)"
+  if [ -z "$resolverResponse" ]; then
+    cat 1>&2 <<EOF
+
+NOTE: Your environment does not seem to contain the Apache XML
+      Commons Resolver; without that, you can't use XML catalogs
+      with Java applications. For more information, see the "How
+      to use a catalog file" section in Bob Stayton's "DocBook
+      XSL: The Complete Guide"
+
+      http://sagehill.net/docbookxsl/UseCatalog.html
+
+EOF
+  fi
+}
+
+emitNoChangeMsg() {
+  cat 1>&2 <<EOF
+
+NOTE: No changes were made to CatalogManagers.properties. To
+      provide your Java tools with XML catalog information for
+      this distribution, you will need to make the appropriate
+      changes manually.
+
+EOF
+}
+
+testCatalogs() {
+  if [ ! -f "$thisXmlCatalog" ]; then
+    cat 1>&2 <<EOF
+
+FATAL: $thisXmlCatalog file needed but not found. Stopping.
+EOF
+  exit
+  fi
+
+  if [ -z "$XML_CATALOG_FILES" ]; then
+    emit_message
+    emit_message "WARNING: XML_CATALOG_FILES not set. Not testing with xmlcatalog."
+  else
+    xmlCatalogResponse="$(xmlcatalog 2>/dev/null)"
+    if [ -z "$xmlCatalogResponse" ]; then
+    cat 1>&2 <<EOF
+
+WARNING: Cannot locate the "xmlcatalog" command. Make sure that
+         you have libxml2 and its associated utilities installed.
+
+         http://xmlsoft.org/
+
+EOF
+    else
+      emit_message "Testing with xmlcatalog..."
+      # read in pathname-uri pairs from .urilist file
+      while read pair; do
+        if [ ! "${pair%* *}" = "." ]; then
+          path=$mydir/${pair%* *}
+        else
+          path=$mydir/
+        fi
+        uri=${pair#* *}
+        emit_message
+        emit_message "  Tested: $uri"
+        for catalog in $XML_CATALOG_FILES; do
+          response="$(xmlcatalog $catalog $uri| grep -v "No entry")"
+          if [ -n "$response" ]; then
+            if [ "$response" = "$path" ]; then
+              emit_message "  Result: $path"
+              break
+            else
+              emit_message "  Result: FAILED"
+            fi
+          fi
+        done
+      done < $mydir/.urilist
+    fi
+  fi
+
+  if [ -z "$CLASSPATH" ]; then
+    emit_message
+    emit_message "NOTE: CLASSPATH not set. Not testing with Apache XML Commons Resolver."
+  else
+    if [ "$(checkForResolver)" ]; then
+      checkForResolver
+    else
+      emit_message
+      emit_message "Testing with Apache XML Commons Resolver..."
+      # read in pathname-uri pairs from .urilist file
+      while read pair; do
+        if [ ! "${pair%* *}" = "." ]; then
+          path=$mydir/${pair%* *}
+        else
+          path=$mydir/
+        fi
+        uri=${pair#* *}
+        emit_message
+        emit_message "  Tested: $uri"
+        if [ ${uri%.dtd} != $uri ]; then
+          response="$(java org.apache.xml.resolver.apps.resolver system -s $uri | grep "Result")"
+        else
+          response="$(java org.apache.xml.resolver.apps.resolver uri -u $uri | grep "Result")"
+        fi
+        if [ "$response" ]; then
+          if [ "${response#*$path}" != "$response" ]; then
+            emit_message "  Result: $path"
+          else
+            emit_message "  Result: FAILED"
+          fi
+          echo
+        fi
+      done < $mydir/.urilist
+    fi
+  fi
+}
+
+# get opts and execute appropriate function
+case $1 in
+  *-uninstall)
+  uninstall $2 $3 $4
+  ;;
+  *-test)
+  testCatalogs
+  ;;
+  *)
+  main
+  ;;
+esac
+
+# Copyright
+# ---------
+# Copyright 2005-2007 Michael(tm) Smith <smith@sideshowbarker.net>
+# 
+# Permission is hereby granted, free of charge, to any person
+# obtaining a copy of this software and associated documentation
+# files (the "Software"), to deal in the Software without
+# restriction, including without limitation the rights to use, copy,
+# modify, merge, publish, distribute, sublicense, and/or sell copies
+# of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+# 
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+
+# vim: number