bolt 0.19.1 → 0.20.0

data/vendored/puppet/lib/puppet/application/certificate.rb

@@ -1,17 +0,0 @@
-require 'puppet/application/indirection_base'
-require 'puppet/ssl/oids'
-
-class Puppet::Application::Certificate < Puppet::Application::IndirectionBase
-  def setup
-    Puppet::SSL::Oids.register_puppet_oids
-    location = Puppet::SSL::Host.ca_location
-    if location == :local && !Puppet::SSL::CertificateAuthority.ca?
-      # I'd prefer if this could be dealt with differently; ideally, run_mode should be set as
-      #  part of a class definition, and should not be modifiable beyond that.  This is one of
-      #  the cases where that isn't currently possible.
-      Puppet.settings.preferred_run_mode = "master"
-    end
-
-    super
-  end
-end

data/vendored/puppet/lib/puppet/application/certificate_request.rb

@@ -1,7 +0,0 @@
-require 'puppet/application/indirection_base'
-
-# NOTE: this is using an "old" naming convention (underscores instead of camel-case), for backwards
-#  compatibility with 2.7.x.  When the old naming convention is officially and publicly deprecated,
-#  this should be changed to camel-case.
-class Puppet::Application::Certificate_request < Puppet::Application::IndirectionBase
-end

data/vendored/puppet/lib/puppet/application/certificate_revocation_list.rb

@@ -1,7 +0,0 @@
-require 'puppet/application/indirection_base'
-
-# NOTE: this is using an "old" naming convention (underscores instead of camel-case), for backwards
-#  compatibility with 2.7.x.  When the old naming convention is officially and publicly deprecated,
-#  this should be changed to camel-case.
-class Puppet::Application::Certificate_revocation_list < Puppet::Application::IndirectionBase
-end

data/vendored/puppet/lib/puppet/application/config.rb

@@ -1,5 +0,0 @@
-require 'puppet/application/face_base'
-
-class Puppet::Application::Config < Puppet::Application::FaceBase
-  environment_mode :not_required
-end

data/vendored/puppet/lib/puppet/application/describe.rb

@@ -1,257 +0,0 @@
-require 'puppet/application'
-
-class Formatter
-
-  def initialize(width)
-    @width = width
-  end
-
-  def wrap(txt, opts)
-    return "" unless txt && !txt.empty?
-    work = (opts[:scrub] ? scrub(txt) : txt)
-    indent = (opts[:indent] ? opts[:indent] : 0)
-    textLen = @width - indent
-    patt = Regexp.new("\\A(.{0,#{textLen}})[ \n]")
-    prefix = " " * indent
-
-    res = []
-
-    while work.length > textLen
-      if work =~ patt
-        res << $1
-        work.slice!(0, $MATCH.length)
-      else
-        res << work.slice!(0, textLen)
-      end
-    end
-    res << work if work.length.nonzero?
-    prefix + res.join("\n#{prefix}")
-  end
-
-  def header(txt, sep = "-")
-    "\n#{txt}\n" + sep * txt.size
-  end
-
-  private
-
-  def scrub(text)
-    # For text with no carriage returns, there's nothing to do.
-    return text if text !~ /\n/
-
-    # If we can match an indentation, then just remove that same level of
-    # indent from every line.
-    if text =~ /^(\s+)/
-      indent = $1
-      return text.gsub(/^#{indent}/,'')
-    else
-      return text
-    end
-  end
-
-end
-
-class TypeDoc
-
-  def initialize
-    @format = Formatter.new(76)
-    @types = {}
-    Puppet::Type.loadall
-    Puppet::Type.eachtype { |type|
-      next if type.name == :component
-      @types[type.name] = type
-    }
-  end
-
-  def list_types
-    puts "These are the types known to puppet:\n"
-    @types.keys.sort { |a, b|
-      a.to_s <=> b.to_s
-    }.each do |name|
-      type = @types[name]
-      s = type.doc.gsub(/\s+/, " ")
-      n = s.index(". ")
-      if n.nil?
-        s = ".. no documentation .."
-      elsif n > 45
-        s = s[0, 45] + " ..."
-      else
-        s = s[0, n]
-      end
-      printf "%-15s - %s\n", name, s
-    end
-  end
-
-  def format_type(name, opts)
-    name = name.to_sym
-    unless @types.has_key?(name)
-      puts "Unknown type #{name}"
-      return
-    end
-    type = @types[name]
-    puts @format.header(name.to_s, "=")
-    puts @format.wrap(type.doc, :indent => 0, :scrub => true) + "\n\n"
-
-    puts @format.header("Parameters")
-    if opts[:parameters]
-      format_attrs(type, [:property, :param])
-    else
-      list_attrs(type, [:property, :param])
-    end
-
-    if opts[:meta]
-      puts @format.header("Meta Parameters")
-      if opts[:parameters]
-        format_attrs(type, [:meta])
-      else
-        list_attrs(type, [:meta])
-      end
-    end
-
-    if type.providers.size > 0
-      puts @format.header("Providers")
-      if opts[:providers]
-        format_providers(type)
-      else
-        list_providers(type)
-      end
-    end
-  end
-
-  # List details about attributes
-  def format_attrs(type, attrs)
-    docs = {}
-    type.allattrs.each do |name|
-      kind = type.attrtype(name)
-      docs[name] = type.attrclass(name).doc if attrs.include?(kind) && name != :provider
-    end
-
-    docs.sort { |a,b|
-      a[0].to_s <=> b[0].to_s
-    }.each { |name, doc|
-      print "\n- **#{name}**"
-      if type.key_attributes.include?(name) and name != :name
-        puts " (*namevar*)"
-      else
-        puts ""
-      end
-      puts @format.wrap(doc, :indent => 4, :scrub => true)
-    }
-  end
-
-  # List the names of attributes
-  def list_attrs(type, attrs)
-    params = []
-    type.allattrs.each do |name|
-      kind = type.attrtype(name)
-      params << name.to_s if attrs.include?(kind) && name != :provider
-    end
-    puts @format.wrap(params.sort.join(", "), :indent => 4)
-  end
-
-  def format_providers(type)
-    type.providers.sort { |a,b|
-      a.to_s <=> b.to_s
-    }.each { |prov|
-      puts "\n- **#{prov}**"
-      puts @format.wrap(type.provider(prov).doc, :indent => 4, :scrub => true)
-    }
-  end
-
-  def list_providers(type)
-    list = type.providers.sort { |a,b|
-      a.to_s <=> b.to_s
-    }.join(", ")
-    puts @format.wrap(list, :indent => 4)
-  end
-
-end
-
-class Puppet::Application::Describe < Puppet::Application
-  banner "puppet describe [options] [type]"
-
-  option("--short", "-s", "Only list parameters without detail") do |arg|
-    options[:parameters] = false
-  end
-
-  option("--providers","-p")
-  option("--list", "-l")
-  option("--meta","-m")
-
-  def summary
-    _("Display help about resource types")
-  end
-
-  def help
-    <<-HELP
-
-puppet-describe(8) -- #{summary}
-========
-
-SYNOPSIS
---------
-Prints help about Puppet resource types, providers, and metaparameters.
-
-
-USAGE
------
-puppet describe [-h|--help] [-s|--short] [-p|--providers] [-l|--list] [-m|--meta]
-
-
-OPTIONS
--------
-* --help:
-  Print this help text
-
-* --providers:
-  Describe providers in detail for each type
-
-* --list:
-  List all types
-
-* --meta:
-  List all metaparameters
-
-* --short:
-  List only parameters without detail
-
-
-EXAMPLE
--------
-    $ puppet describe --list
-    $ puppet describe file --providers
-    $ puppet describe user -s -m
-
-
-AUTHOR
-------
-David Lutterkort
-
-
-COPYRIGHT
----------
-Copyright (c) 2011 Puppet Inc., LLC Licensed under the Apache 2.0 License
-
-    HELP
-  end
-
-  def preinit
-    options[:parameters] = true
-  end
-
-  def main
-    doc = TypeDoc.new
-
-    if options[:list]
-      doc.list_types
-    else
-      options[:types].each { |name| doc.format_type(name, options) }
-    end
-  end
-
-  def setup
-    options[:types] = command_line.args.dup
-    handle_help(nil) unless options[:list] || options[:types].size > 0
-    $stderr.puts "Warning: ignoring types when listing all types" if options[:list] && options[:types].size > 0
-  end
-
-end

data/vendored/puppet/lib/puppet/application/device.rb

@@ -1,378 +0,0 @@
-require 'puppet/application'
-require 'puppet/util/network_device'
-
-class Puppet::Application::Device < Puppet::Application
-
-  run_mode :agent
-
-  attr_accessor :args, :agent, :host
-
-  def app_defaults
-    super.merge({
-      :catalog_terminus => :rest,
-      :catalog_cache_terminus => :json,
-      :node_terminus => :rest,
-      :facts_terminus => :network_device,
-    })
-  end
-
-  def preinit
-    # Do an initial trap, so that cancels don't get a stack trace.
-    Signal.trap(:INT) do
-      $stderr.puts _("Cancelling startup")
-      exit(0)
-    end
-
-    {
-      :apply => nil,
-      :waitforcert => nil,
-      :detailed_exitcodes => false,
-      :verbose => false,
-      :debug => false,
-      :centrallogs => false,
-      :setdest => false,
-      :resource => false,
-      :target => nil,
-      :to_yaml => false,
-    }.each do |opt,val|
-      options[opt] = val
-    end
-
-    @args = {}
-  end
-
-  option("--centrallogging")
-  option("--debug","-d")
-  option("--resource","-r")
-  option("--to_yaml","-y")
-  option("--verbose","-v")
-
-  option("--detailed-exitcodes") do |arg|
-    options[:detailed_exitcodes] = true
-  end
-
-  option("--apply MANIFEST") do |arg|
-    options[:apply] = arg.to_s
-  end
-
-  option("--logdest DEST", "-l DEST") do |arg|
-    handle_logdest_arg(arg)
-  end
-
-  option("--waitforcert WAITFORCERT", "-w") do |arg|
-    options[:waitforcert] = arg.to_i
-  end
-
-  option("--port PORT","-p") do |arg|
-    @args[:Port] = arg
-  end
-
-  option("--target DEVICE", "-t") do |arg|
-    options[:target] = arg.to_s
-  end
-
-  def summary
-    _("Manage remote network devices")
-  end
-
-  def help
-      <<-HELP
-
-puppet-device(8) -- #{summary}
-========
-
-SYNOPSIS
---------
-Retrieves catalogs from the Puppet master and applies them to remote devices. 
-
-This subcommand can be run manually; or periodically using cron,
-a scheduled task, or a similar tool.
-
-
-USAGE
------
-  puppet device [-d|--debug] [--detailed-exitcodes] [--deviceconfig <file>]
-                [-h|--help] [-l|--logdest syslog|<file>|console]
-                [-v|--verbose] [-w|--waitforcert <seconds>]
-                [-a|--apply <file>] [-r|--resource <type> [name]]
-                [-t|--target <device>] [--user=<user>] [-V|--version]
-
-
-DESCRIPTION
------------
-Devices require a proxy Puppet agent to request certificates, collect facts,
-retrieve and apply catalogs, and store reports.
-
-
-USAGE NOTES
------------
-Devices managed by the puppet-device subcommand on a Puppet agent are 
-configured in device.conf, which is located at $confdir/device.conf by default, 
-and is configurable with the $deviceconfig setting. 
-
-The device.conf file is an INI-like file, with one section per device:
-
-[<DEVICE_CERTNAME>]
-type <TYPE>
-url <URL>
-debug
-
-The section name specifies the certname of the device. 
-
-The values for the type and url properties are specific to each type of device.
-
-The optional debug property specifies transport-level debugging,
-and is limited to telnet and ssh transports.
-
-See https://docs.puppet.com/puppet/latest/config_file_device.html for details.
-
-
-OPTIONS
--------
-Note that any setting that's valid in the configuration file is also a valid 
-long argument. For example, 'server' is a valid configuration parameter, so 
-you can specify '--server <servername>' as an argument.
-
-* --debug:
-  Enable full debugging.
-
-* --detailed-exitcodes:
-  Provide transaction information via exit codes. If this is enabled, an exit
-  code of '1' means at least one device had a compile failure, an exit code of
-  '2' means at least one device had resource changes, and an exit code of '4'
-  means at least one device had resource failures. Exit codes of '3', '5', '6',
-  or '7' means that a bitwise combination of the preceding exit codes happened.
-
-* --deviceconfig:
-  Path to the device config file for puppet device.
-  Default: $confdir/device.conf
-
-* --help:
-  Print this help message
-
-* --logdest:
-  Where to send log messages. Choose between 'syslog' (the POSIX syslog
-  service), 'console', or the path to a log file. If debugging or verbosity is
-  enabled, this defaults to 'console'. Otherwise, it defaults to 'syslog'.
-
-  A path ending with '.json' will receive structured output in JSON format. The
-  log file will not have an ending ']' automatically written to it due to the
-  appending nature of logging. It must be appended manually to make the content
-  valid JSON.
-
-* --apply:
-  Apply a manifest against a remote target. Target must be specified.
-
-* --resource:
-  Displays a resource state as Puppet code, roughly equivalent to
-  `puppet resource`.  Can be filterd by title. Requires --target be specified.
-
-* --target:
-  Target a specific device/certificate in the device.conf. Doing so will perform a
-  device run against only that device/certificate.
-
-* --to_yaml:
-  Output found resources in yaml format, suitable to use with Hiera and
-  create_resources.
-
-* --user:
-  The user to run as.
-
-* --verbose:
-  Turn on verbose reporting.
-
-* --waitforcert:
-  This option only matters for daemons that do not yet have certificates
-  and it is enabled by default, with a value of 120 (seconds).  This causes
-  +puppet agent+ to connect to the server every 2 minutes and ask it to sign a
-  certificate request.  This is useful for the initial setup of a puppet
-  client.  You can turn off waiting for certificates by specifying a time of 0.
-
-
-EXAMPLE
--------
-      $ puppet device --target remotehost --verbose
-
-AUTHOR
-------
-Brice Figureau
-
-
-COPYRIGHT
----------
-Copyright (c) 2011 Puppet Inc., LLC
-Licensed under the Apache 2.0 License
-      HELP
-  end
-
-
-  def main
-    if options[:resource] and !options[:target]
-      Puppet.err _("resource command requires target")
-      exit(1)
-    end
-    unless options[:apply].nil?
-      if options[:target].nil?
-        Puppet.err _("missing argument: --target is required when using --apply")
-        exit(1)
-      end
-      unless File.file?(options[:apply])
-        Puppet.err _("%{file} does not exist, cannot apply") % { file: options[:apply] }
-        exit(1)
-      end
-    end
-    vardir = Puppet[:vardir]
-    confdir = Puppet[:confdir]
-    certname = Puppet[:certname]
-
-    env = Puppet.lookup(:environments).get(Puppet[:environment])
-    returns = Puppet.override(:current_environment => env, :loaders => Puppet::Pops::Loaders.new(env)) do
-      # find device list
-      require 'puppet/util/network_device/config'
-      devices = Puppet::Util::NetworkDevice::Config.devices.dup
-      if options[:target]
-        devices.select! { |key, value| key == options[:target] }
-      end
-      if devices.empty?
-        if options[:target]
-          Puppet.err _("Target device / certificate '%{target}' not found in %{config}") % { target: options[:target], config: Puppet[:deviceconfig] }
-        else
-          Puppet.err _("No device found in %{config}") % { config: Puppet[:deviceconfig] }
-          exit(1)
-        end
-      end
-      devices.collect do |devicename,device|
-        begin
-          device_url = URI.parse(device.url)
-          # Handle nil scheme & port
-          scheme = "#{device_url.scheme}://" if device_url.scheme
-          port = ":#{device_url.port}" if device_url.port
-
-          # override local $vardir and $certname
-          Puppet[:confdir] = ::File.join(Puppet[:devicedir], device.name)
-          Puppet[:vardir] = ::File.join(Puppet[:devicedir], device.name)
-          Puppet[:certname] = device.name
-
-          # this init the device singleton, so that the facts terminus
-          # and the various network_device provider can use it
-          Puppet::Util::NetworkDevice.init(device)
-
-          if options[:resource]
-            type, name = parse_args(command_line.args)
-            Puppet.info _("retrieving resource: %{resource} from %{target} at %{scheme}%{url_host}%{port}%{url_path}") % { resource: type, target: device.name, scheme: scheme, url_host: device_url.host, port: port, url_path: device_url.path }
-
-            resources = find_resources(type, name)
-
-            if options[:to_yaml]
-              text = resources.map do |resource|
-                resource.prune_parameters(:parameters_to_include => @extra_params).to_hierayaml.force_encoding(Encoding.default_external)
-              end.join("\n")
-              text.prepend("#{type.downcase}:\n")
-            else
-              text = resources.map do |resource|
-                resource.prune_parameters(:parameters_to_include => @extra_params).to_manifest.force_encoding(Encoding.default_external)
-              end.join("\n")
-            end
-            (puts text)
-          elsif options[:apply]
-            # avoid reporting to server
-            Puppet::Transaction::Report.indirection.terminus_class = :yaml
-            Puppet::Resource::Catalog.indirection.cache_class = nil
-
-            require 'puppet/application/apply'
-            begin
-
-              Puppet[:node_terminus] = :plain
-              Puppet[:catalog_terminus] = :compiler
-              Puppet[:catalog_cache_terminus] = nil
-              Puppet[:facts_terminus] = :network_device
-              Puppet.override(:network_device => true) do
-                Puppet::Application::Apply.new(Puppet::Util::CommandLine.new('puppet', ["apply", options[:apply]])).run_command
-              end
-            end
-          else
-            Puppet.info _("starting applying configuration to %{target} at %{scheme}%{url_host}%{port}%{url_path}") % { target: device.name, scheme: scheme, url_host: device_url.host, port: port, url_path: device_url.path }
-            # this will reload and recompute default settings and create the devices sub vardir
-            Puppet.settings.use :main, :agent, :ssl
-            # ask for a ssl cert if needed, but at least
-            # setup the ssl system for this device.
-            setup_host
-
-            require 'puppet/configurer'
-            configurer = Puppet::Configurer.new
-            configurer.run(:network_device => true, :pluginsync => Puppet::Configurer.should_pluginsync?)
-          end
-        rescue => detail
-          Puppet.log_exception(detail)
-          # If we rescued an error, then we return 1 as the exit code
-          1
-        ensure
-          Puppet[:vardir] = vardir
-          Puppet[:confdir] = confdir
-          Puppet[:certname] = certname
-          Puppet::SSL::Host.reset
-        end
-      end
-    end
-
-    if ! returns or returns.compact.empty?
-      exit(1)
-    elsif options[:detailed_exitcodes]
-      # Bitwise OR the return codes together, puppet style
-      exit(returns.compact.reduce(:|))
-    elsif returns.include? 1
-      exit(1)
-    else
-      exit(0)
-    end
-  end
-
-  def parse_args(args)
-    type = args.shift or raise _("You must specify the type to display")
-    Puppet::Type.type(type) or raise _("Could not find type %{type}") % { type: type }
-    name = args.shift
-
-    [type, name]
-  end
-
-  def find_resources(type, name)
-    key = [type, name].join('/')
-
-    if name
-      [ Puppet::Resource.indirection.find( key ) ]
-    else
-      Puppet::Resource.indirection.search( key, {} )
-    end
-  end
-
-  def setup_host
-    @host = Puppet::SSL::Host.new
-    waitforcert = options[:waitforcert] || (Puppet[:onetime] ? 0 : Puppet[:waitforcert])
-    @host.wait_for_cert(waitforcert)
-  end
-
-  def setup
-    setup_logs
-
-    args[:Server] = Puppet[:server]
-    if options[:centrallogs]
-      logdest = args[:Server]
-
-      logdest += ":" + args[:Port] if args.include?(:Port)
-      Puppet::Util::Log.newdestination(logdest)
-    end
-
-    Puppet.settings.use :main, :agent, :device, :ssl
-
-    # We need to specify a ca location for all of the SSL-related
-    # indirected classes to work; in fingerprint mode we just need
-    # access to the local files and we don't need a ca.
-    Puppet::SSL::Host.ca_location = :remote
-
-    Puppet::Transaction::Report.indirection.terminus_class = :rest
-
-    if Puppet[:catalog_cache_terminus]
-      Puppet::Resource::Catalog.indirection.cache_class = Puppet[:catalog_cache_terminus].intern
-    end
-  end
-end