bf4-metric_fu 2.1.3.1

data/HISTORY

@@ -0,0 +1,252 @@
+=== MetricFu 2.1.3 / 2012-10-25
+
+* Added to rubygems.org as bf-metric_fu -Benjamin Fleischer
+* Added to travis-ci -Benjamin Fleischer
+* Re-enabling Saikuro for ruby 1.9 with jpgolly's gem jpgolly-Saikuro -Benjamin Fleischer
+* Ensured files are only loaded once -Benjamin Fleischer
+* Looked at moving to simplecov-rcov, but was unsuccessful -Benjamin Fleischer
+* Fixed breaking tests, deprecation warnings -Benjamin Fleischer
+
+=== MetricFu 2.1.2 / 2012-09-05
+
+* Getting it working on Rails 3, partly by going through the pull requests and setting gem dependencies to older, working versions - Benjamin Fleischer
+* It mostly works on Ruby 1.9, though there is an unresolved sexp_parser issue  - Benjamin Fleischer
+* Added link_prefix to configuration to allow URIs specified in config instead of file or txmt - dan sinclair
+ 
+=== MetricFu 2.1.1 / 2011-03-2
+
+* Making syntax highlighting optional (config.syntax_highlighting = false) so Ruby 1.9.2 users don't get "invalid byte sequence in UTF-8" errors.
+
+=== MetricFu 2.1.0 / 2011-03-1
+
+* Flog gemspec version was >= 2.2.0, which was too early and didn't work. Changed to >= 2.3.0 -  Chris Griego
+* RCov generator now uses a regex with begin and end line anchor to avoid splitting on comments with equal signs in source files - Andrew Selder
+* RCov generator now always strips the 3 leading characters from the lines when reconstruction source files so that heredocs and block comments parse successfully - Andrew Selder
+* Dan Mayer ported some specs for the Hotspots code into MetricFu from Caliper's code.
+* Stefan Huber fixed some problems with churn pretending not to support Svn.
+* Kakutani Shintaro added the ability to opt out of opening files with TextMate (config.darwin_txmt_protocol_no_thanks = true).
+* Joel Nimety and Andrew Selder fixed a problem where Saikuro was parsing a dir twice.
+* Dan Sinclair added some awesome 'annotate' functionality to the Hotspots page. Click on it so see the file with problems in-line. 
+* Dan Sinclair added a verbose mode (config.verbose = true).
+
+=== MetricFu 2.0.1 / 2010-11-13
+
+* Delete trailing whitespaces - Delwyn de Villiers
+* Stop Ubuntu choking on invalid multibyte char (US-ASCII) - Delwyn de Villiers
+* Fix invalid next in lib/base/metric_analyzer.rb - Delwyn de Villiers
+* Don't load Saikuro for Ruby 1.9.2 - Delwyn de Villiers
+* Fixed a bug reported by Andrew Davis on the mailing list where configuring the data directory causes dates to be 0/0 - Joshua Cronemeyer
+
+=== MetricFu 2.0.0 / 2010-11-10
+
+* Hotspots - Dan Mayer, Ben Brinckerhoff, Jake Scruggs
+* Rcov integration with Hotspots - Jake Scruggs, Tony Castiglione, Rob Meyer
+
+=== MetricFu 1.5.1 / 2010-7-28
+
+* Patch that allows graphers to skip dates that didn't generate metrics for that graph (GitHub Issue #20). - Chris Griego
+* Fixed bug where if you try and use the gchart grapher with the rails_best_practices metric, it blows up (GitHub Issue #23). - Chris Griego
+* Fixed 'If coverage is 0% metric_fu will explode' bug (GitHub Issue #6). - Stew Welbourne
+
+=== MetricFu 1.5.0 / 2010-7-27
+
+* Fixed bug where Flay results were not being reported.  Had to remove the ability to remove selected files from flay processing (undocumented feature that may go away soon if it keeps causing problems).
+* Rewrote Flog parsing/processing to use Flog programmatically. Note: the yaml output for Flog has changed significantly - Pages have now become MethodContainers.  This probably doesn't matter to you if you are not consuming the metric_fu yaml output.
+* Added support for using config files in Reek and Roodi (roodi support was already there but undocumented).
+* Removed verify_dependencies! as it caused too much confusion to justify the limited set of problems it solved. In the post Bundler world it just didn't seem necessary to limit metric_fu dependencies.
+* Deal with Rails 3 activesupport vs active_support problems. -  jinzhu
+
+=== MetricFu 1.4.0 / 2010-06-19
+
+* Added support for rails_best_practices gem - Richard Huang
+* Added rails stats graphing -- Josh Cronemeyer
+* Parameterize the filetypes for flay. By default flay supports haml as well as rb and has a plugin ability for other filetypes. - bfabry
+* Support for Flog 2.4.0 line numbers - Dan Mayer
+* Saikuro multi input directory patch - Spencer Dillard and Dan Mayer
+* Can now parse rcov analysis file coming from multiple sources with an rcov :external option in the config. - Tarsoly András
+* Fixed open file handles problem in the Saikuro analyzer - aselder, erebor
+* Fix some problems with the google charts - Chris Griego
+* Stop showing the googlecharts warning if you are not using google charts.
+
+=== MetricFu 1.3.0 / 2010-01-26
+
+* Flay can be configured to ignore scores below a threshold (by default it ignores scores less than 100)
+* When running Rcov you can configure the RAILS_ENV (defaults to 'test') so running metric_fu doesn't interfere with other environments
+* Changed devver-construct (a gem hosted by GitHub) development dependency to test-construct dependency (on Gemcutter) - Dan Mayer
+* Upgrade Bluff to 0.3.6 and added tooltips to graphs - Édouard Brière
+* Removed Saikuro from vendor and added it as a gem dependency - Édouard Brière
+* Churn has moved outside metric_fu and is now a gem and a dependency - Dan Mayer
+* Fix 'activesupport' deprecation (it should be 'active_support') - Bryan Helmkamp
+* Declared development dependencies
+* Cleaned and sped up specs
+
+=== MetricFu 1.2.0 / 2010-01-09
+
+* ftools isn't supported by 1.9 so moved to fileutils.
+* Overhauled the graphing to use Gruff or Google Charts so we no longer depend on ImageMagick/rmagick -- thanks to Carl Youngblood.
+* Stopped relying on Github gems as they will be going away.
+
+=== MetricFu 1.1.6 / 2009-12-14
+
+* Now compatible with Reek 1.2x thanks to Kevin Rutherford
+* Fixed problem with deleted files still showing up in Flog reports thanks to Dan Mayer
+
+=== MetricFu 1.1.5 / 2009-8-13
+
+* Previous Ruby 1.9 fix was not quite fix-y enough
+
+=== MetricFu 1.1.4 / 2009-7-13
+
+* Fixed another Ruby 1.9x bug
+
+=== MetricFu 1.1.3 / 2009-7-10
+
+* MetricFu is now Ruby 1.9x compatible
+* Removed the check for deprecated ways of configuring metric_fu as the tests were causing Ruby 1.9x problems and it's been forever since they were supported.
+* Removed total flog score from graph (which will always go up and so doesn't mean much) and replacing it with top_five_percent_average which is an average of the worst 5 percent of your methods.
+* Sort Flog by highest score in the class which I feel is more important than the total flog flog score.
+
+=== MetricFu 1.1.2 / 2009-7-09
+
+* Removed dependency on gruff and rmagick (unless the user wants graphs, of course).
+* New look for styling -- Edouard Brière
+* Extra param in rcov call was causing problems -- Stewart Welbourne
+* Preventing rake task from being run multiple times when other rake tasks switch the environment -- Matthew Van Horn
+* Typo in Rcov dependency verification and fixing parsing Saikuro nested information -- Mark Wilden
+
+=== MetricFu 1.1.1 / 2009-6-29
+
+* Fix for empty flog files
+
+=== MetricFu 1.1.0 / 2009-6-22
+
+* Flog, flay, reek, roodi, and rcov reports now graph progress over time.  Well done Nick Quaranto and Edouard Brière.
+* 'Awesome' template has been brought in so that reports look 90% less 'ghetto.'  Also done by Nick Quaranto and Edouard Brière.
+* Added links to TextMate (which keep getting removed.  Probably by me. Sorry.) -- David Chelimsky
+* Fixed a bug for scratch files which have a size of 0 -- Kevin Hall
+* Changed gem dependencies from install-time in gemspec to runtime when each of the generators is loaded.  This allows use of github gems (i.e. relevance-rcov instead of rcov) and also allows you to install only the gems for the metrics you plan on using.  -- Alex Rothenberg
+* Empty Flog file fix -- Adam Bair
+* Added a simple fix for cases where Saikuro results with nested information -- Randy Souza
+* Fixed rcov configuration so it ignores library files on Linux -- Diego Carrion
+* Changing churn so that it still works deeper than the git root directory -- Andrew Timberlake
+* Andrew Timberlake also made some nice changes to the base template which kinda of got overshadowed by the 'awesome' template.  Sorry about that Andrew.
+
+=== MetricFu 1.0.2 / 2009-5-11
+
+* Fixing problems with Reek new line character (thanks to all who pointed this out)
+* Flog now recognizes namespaces in method names thanks to Daniel Guettler
+* Saikuro now looks at multiple directories, again.
+
+=== MetricFu 1.0.1 / 2009-5-3
+
+* metrics:all task no longer requires a MetricFu::Configuration.run {} if you want to accept the defaults
+* rcov task now reports total coverage percent
+
+=== MetricFu 1.0.0 / 2009-4-30
+
+* Merged in Grant McInnes' work on creating yaml output for all metrics to aid harvesting by other tools
+* Supporting Flog 2.1.0
+* Supporting Reek 1.0.0
+* Removed dependency on Rails Env for 3.months.ago (for churn report), now using chronic gem ("3 months ago").
+* Almost all code is out of Rakefiles now and so is more easily testable
+* Metrics inherit from a refactored Generator now.  New metrics generators just have to implement "emit", "analyze", "to_h" and inherit from Generator.  They also must have a template.  See the flay generator and template for a simple implementation.
+* You now define the metrics you wish to run in the configuration and then run "metrics:all".  No other metrics task is exposed by default.
+
+=== MetricFu 0.9.0 / 2009-1-25
+
+* Adding line numbers to the views so that people viewing it on cc.rb can figure out where the problems are
+* Merging in changes from Jay Zeschin having to do with the railroad task -- I still have no idea how to use it (lemme know if you figure it out)
+* Added totals to Flog results
+* Moved rcov options to configuration
+
+=== MetricFu 0.8.9 / 2009-1-20
+
+* Thanks to Andre Arko and Petrik de Heus for adding the following features:
+* The source control type is auto-detected for Churn
+* Moved all presentation to templates
+* Wrote specs for all classes
+* Added flay, Reek and Roodi metrics
+* There's now a configuration class (see README for details)
+* Unification of metrics reports
+* Metrics can be generated using one command
+* Adding new metrics reports has been standardized
+
+=== MetricFu 0.8.0 / 2008-10-06
+
+* Source Control Churn now supports git (thanks to Erik St Martin)
+* Flog Results are sorted by Highest Flog Score
+* Fix for a bunch of 'already initialized constant' warnings that metric_fu caused
+* Fixing bug so the flog reporter can handle methods with digits in the name (thanks to Andy Gregorowicz)
+* Internal Rake task now allows metric_fu to flog/churn itself
+
+=== MetricFu 0.7.6 / 2008-09-15
+
+* CHURN_OPTIONS has become MetricFu::CHURN_OPTIONS
+* SAIKURO_OPTIONS has become MetricFu::SAIKURO_OPTIONS
+* Rcov now looks at test and specs
+* Exclude gems and Library ruby code from rcov
+* Fixed bug with churn start_date functionality (bad path)
+
+=== MetricFu 0.7.5 / 2008-09-12
+
+* Flog can now flog any set of directories you like (see README).
+* Saikuro can now look at any set of directories you like (see README).
+
+=== MetricFu 0.7.1 / 2008-09-12
+
+* Fixed filename bugs pointed out by Bastien
+
+=== MetricFu 0.7.0 / 2008-09-11
+
+* Merged in Sean Soper's changes to metric_fu.
+* Metric_fu is now a gem.
+* Flogging now uses a MD5 hash to figure out if it should re-flog a file (if it's changed)
+* Flogging also has a cool new output screen(s)
+* Thanks Sean!
+
+    === Metricks 0.4.2 / 2008-07-01
+
+    * Changed rcov output directory so that it is no longer 'coverage/unit' but just 'coverage' for better integration with CC.rb
+
+    === Metricks 0.4.1 / 2008-06-13
+
+    * Rcov tests now extend beyond one level depth directory by using RcovTask instead of the shell
+
+    === Metricks 0.4.0 / 2008-06-13
+
+    * Implementing functionality for use as a gem
+    * Added Rakefile to facilitate testing
+
+    === Metricks 0.3.0 / 2008-06-11
+
+    * Generated reports now open on darwin automatically
+    * Generated reports reside under tmp/metricks unless otherwise specified by ENV['CC_BUILD_ARTIFACTS']
+    * MD5Tracker works with Flog reports for speed optimization
+
+    === Metricks 0.2.0 / 2008-06-11
+
+    * Integrated use of base directory constant
+    * Have all reports automatically open in a browser if platform is darwin
+    * Namespaced under Metricks
+    * Dropped use of shell md5 command in favor of Ruby's Digest::MD5 libraries
+
+    === Metricks 0.1.0 / 2008-06-10
+
+    * Initial integration of metric_fu and my enhancements to flog
+    * Metrics are generated but are all over the place
+
+=== MetricFu 0.6.0 / 2008-05-11
+
+* Add source control churn report
+
+=== MetricFu 0.5.1 / 2008-04-25
+
+* Fixed bug with Saikuro report generation - thanks Toby Tripp
+
+=== MetricFu 0.5.0 / 2008-04-25
+
+* create MetricFu as a Rails Plugin
+* Add Flog Report
+* Add Coverage Report
+* Add Saikuro Report
+* Add Stats Report

data/MIT-LICENSE

@@ -0,0 +1,22 @@
+Copyright (c) 2008,2009,2010,2011 Jake Scruggs
+
+Permission is hereby granted, free of charge, to any person
+obtaining a copy of this software and associated documentation
+files (the "Software"), to deal in the Software without
+restriction, including without limitation the rights to use,
+copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.

data/README.md

@@ -0,0 +1,49 @@
+This fork is intended to be a maintained version of metric_fu, as [the original version by Jake Scruggs has been abandoned.](http://jakescruggs.blogspot.com/2012/08/why-i-abandoned-metricfu.html). It is currently testing on MRI 1.8.7 and 1.9.3
+
+At this time, the gem is published on rubygems.org as bf4-metric_fu
+
+The japgolly-Saikuro fork is a part of an attempt to get metric_fu working in a modern
+Ruby environment, specifically compatibility with Ruby 1.9 and Bundler.
+
+__CI Build Status__
+
+[![Build Status](https://secure.travis-ci.org/bf4/metric_fu.png)](http://travis-ci.org/bf4/metric_fu)
+
+This project runs [travis-ci.org](http://travis-ci.org)
+
+===============================================================================
+
+See http://metric-fu.rubyforge.org/ for documentation, or the HISTORY file for a change log.
+
+How to contribute:
+
+1. Fork metric_fu on github.
+2. bundle install
+3. Run the tests ('rake')
+4. Run metric_fu on itself ('rake metrics:all')
+5. Make the changes you want and back them up with tests.
+6. Make sure two important rake tests still run ('rake' and 'rake metrics:all')
+7. Commit and send me a pull request with details as to what has been changed.
+
+Extra Credit:
+
+1. Make sure your changes work in 1.8.7, Ruby Enterprise Edition, and 1.9.3 (Hint use 'rvm' to help install multiple rubies)
+2. Update the documentation (web page inside the 'home_page' folder)
+3. Update the History and give yourself credit.
+
+
+The more of the above steps you do the easier it will be for me to merge in which will greatly increase you chances of getting your changes accepted.
+
+Resources:
+
+Github: http://github.com/bf4/metric_fu
+Issue Tracker: http://github.com/bf4/metric_fu/issues
+My Blog: http://benjaminfleischer.com
+
+Original Resources:
+
+Homepage: http://metric-fu.rubyforge.org/
+Github: http://github.com/jscruggs/metric_fu
+Google Group: http://groups.google.com/group/metric_fu
+Issue Tracker: http://github.com/jscruggs/metric_fu/issues
+My Blog: http://jakescruggs.blogspot.com/

data/Rakefile

@@ -0,0 +1,22 @@
+$LOAD_PATH << '.'
+begin
+  require 'spec/rake/spectask'
+  desc "Run all specs in spec directory"
+  Spec::Rake::SpecTask.new(:spec) do |t|
+    t.spec_files = FileList['spec/**/*_spec.rb']
+  end
+rescue LoadError
+  require 'rspec/core/rake_task'
+  desc "Run all specs in spec directory"
+  RSpec::Core::RakeTask.new(:spec)
+end
+
+require File.expand_path File.join(File.dirname(__FILE__),'lib/metric_fu')
+
+MetricFu::Configuration.run do |config|
+  config.roodi    = config.roodi.merge(:roodi_config => 'config/roodi_config.yml')
+  config.churn    = { :start_date => "1 year ago", :minimum_churn_count => 10}
+  config.hotspots = { :start_date => "1 year ago", :minimum_churn_count => 10}
+end
+
+task :default => :spec

data/TODO

@@ -0,0 +1,6 @@
+== TODO list
+
+* Color code flog results with scale from: http://jakescruggs.blogspot.com/2008/08/whats-good-flog-score.html
+* Make running metric_fu on metric_fu less embarrassing
+* Load all gems at config time so you fail fast if one is missing
+

data/lib/base/base_template.rb

@@ -0,0 +1,182 @@
+module MetricFu
+
+  # The Template class is intended as an abstract class for concrete
+  # template classes to subclass.  It provides a variety of utility
+  # methods to make templating a bit easier.  However, classes do not
+  # have to inherit from here in order to provide a template.  The only
+  # requirement for a template class is that it provides a #write method
+  # to actually write out the template.  See StandardTemplate for an
+  # example.
+  class Template
+    attr_accessor :report, :per_file_data
+
+    private
+    # Creates a new erb evaluated result from the passed in section.
+    #
+    # @param section String
+    #   The section name of
+    #
+    # @return String
+    #   The erb evaluated string
+    def erbify(section)
+      require 'erb'
+      erb_doc = File.read(template(section))
+      ERB.new(erb_doc).result(binding)
+    end
+
+    # Determines whether a template file exists for a given section
+    # of the full template.
+    #
+    # @param section String
+    #   The section of the template to check against
+    #
+    # @return Boolean
+    #   Does a template file exist for this section or not?
+    def template_exists?(section)
+      File.exist?(template(section))
+    end
+
+    # Copies an instance variable mimicing the name of the section
+    # we are trying to render, with a value equal to the passed in
+    # constant.  Allows the concrete template classes to refer to
+    # that instance variable from their ERB rendering
+    #
+    # @param section String
+    #  The name of the instance variable to create
+    #
+    # @param contents Object
+    #   The value to set as the value of the created instance
+    #   variable
+    def create_instance_var(section, contents)
+      instance_variable_set("@#{section}", contents)
+    end
+
+    # Generates the filename of the template file to load and
+    # evaluate.  In this case, the path to the template directory +
+    # the section name + .html.erb
+    #
+    # @param section String
+    #   A section of the template to render
+    #
+    # @return String
+    #   A file path
+    def template(section)
+      File.join(this_directory,  section.to_s + ".html.erb")
+    end
+
+    # Returns the filename that the template will render into for
+    # a given section.  In this case, the section name + '.html'
+    #
+    # @param section String
+    #   A section of the template to render
+    #
+    # @return String
+    #   The output filename
+    def output_filename(section)
+      section.to_s + ".html"
+    end
+
+    # Returns the contents of a given css file in order to
+    # render it inline into a template.
+    #
+    # @param css String
+    #   The name of a css file to open
+    #
+    # @return String
+    #   The contents of the css file
+    def inline_css(css)
+      open(File.join(this_directory, css)) { |f| f.read }
+    end
+
+    # Provides a link to open a file through the textmate protocol
+    # on Darwin, or otherwise, a simple file link.
+    #
+    # @param name String
+    #
+    # @param line Integer
+    #   The line number to link to, if textmate is available.  Defaults
+    #   to nil
+    #
+    # @return String
+    #   An anchor link to a textmate reference or a file reference
+    def link_to_filename(name, line = nil, link_content = nil)
+      "<a href='#{file_url(name, line)}'>#{link_content(name, line, link_content)}</a>"
+    end
+
+    def round_to_tenths(decimal)
+      decimal = 0.0 if decimal.to_s.eql?('NaN')
+      (decimal * 10).round / 10.0
+    end
+
+    def link_content(name, line=nil, link_content=nil) # :nodoc:
+      if link_content
+        link_content
+      elsif line
+        "#{name}:#{line}"
+      else
+        name
+      end
+    end
+
+    def display_location(location, stat)
+      file_path, class_name, method_name = location.file_path, location.class_name, location.method_name
+      str = ""
+      str += link_to_filename(file_path)
+      str += " : " if method_name || class_name
+      if(method_name)
+        str += "#{method_name}"
+      else
+        #TODO HOTSPOTS BUG ONLY exists on move over to metric_fu
+        if class_name.is_a?(String)
+          str+= "#{class_name}"
+        end
+      end
+      str
+    end
+
+    def file_url(name, line) # :nodoc:
+      return '' unless name
+      filename = File.expand_path(name.gsub(/^\//, ''))
+      link_prefix = MetricFu.configuration.link_prefix
+      if link_prefix
+        "#{link_prefix}/#{name.gsub(/:.*$/, '')}"
+      elsif render_as_txmt_protocol?
+        "txmt://open/?url=file://#{filename}" << (line ? "&line=#{line}" : "")
+      # elsif render_as_mvim_protocol?
+      #   "mvim://open/?url=file://#{filename}" << (line ? "&line=#{line}" : "")
+      else
+       "file://#{filename}"
+      end
+    end
+
+    def render_as_txmt_protocol? # :nodoc:
+      config = MetricFu.configuration
+      return false unless config.platform.include?('darwin')
+      return !config.darwin_txmt_protocol_no_thanks
+    end
+    def render_as_mvim_protocol? # :nodoc:
+      config = MetricFu.configuration
+      return false unless config.platform.include?('darwin')
+      return !config.darwin_mvim_protocol_no_thanks
+    end
+
+    # Provides a brain dead way to cycle between two values during
+    # an iteration of some sort.  Pass in the first_value, the second_value,
+    # and the cardinality of the iteration.
+    #
+    # @param first_value Object
+    #
+    # @param second_value Object
+    #
+    # @param iteration Integer
+    #   The number of times through the iteration.
+    #
+    # @return Object
+    #   The first_value if iteration is even.  The second_value if
+    #   iteration is odd.
+    def cycle(first_value, second_value, iteration)
+      return first_value if iteration % 2 == 0
+      return second_value
+    end
+  end
+end