bcrypt-ruby 2.1.4-x86-mingw32 → 3.0.0-x86-mingw32

data/lib/bcrypt_engine.rb

@@ -0,0 +1,34 @@
+require 'ffi'
+
+module BCrypt
+  class Engine
+    extend FFI::Library
+
+    BCRYPT_MAXSALT = 16
+    BCRYPT_SALT_OUTPUT_SIZE = 7 + (BCRYPT_MAXSALT * 4 + 2) / 3 + 1
+    BCRYPT_OUTPUT_SIZE = 128
+
+    ffi_lib File.expand_path("../bcrypt_ext", __FILE__)
+
+    attach_function :ruby_bcrypt, [:buffer_out, :string, :string], :string
+    attach_function :ruby_bcrypt_gensalt, [:buffer_out, :uint8, :pointer], :string
+
+    def self.__bc_salt(cost, seed)
+      buffer_out = FFI::Buffer.alloc_out(BCRYPT_SALT_OUTPUT_SIZE, 1)
+      seed_ptr = FFI::MemoryPointer.new(:uint8, BCRYPT_MAXSALT)
+      seed.bytes.to_a.each_with_index { |b, i| seed_ptr.int8_put(i, b) }
+      out = ruby_bcrypt_gensalt(buffer_out, cost, seed_ptr)
+      seed_ptr.free
+      buffer_out.free
+      out || ""
+    end
+
+    def self.__bc_crypt(key, salt, cost)
+      buffer_out = FFI::Buffer.alloc_out(BCRYPT_OUTPUT_SIZE, 1)
+      out = ruby_bcrypt(buffer_out, key || "", salt)
+      buffer_out.free
+      out && out.any? ? out : nil
+    end
+  end
+end
+

data/spec/bcrypt/engine_spec.rb

@@ -30,9 +30,9 @@ end
 describe "Autodetecting of salt cost" do
 
   specify "should work" do
-    BCrypt::Engine.autodetect_cost("$2a$08$hRx2IVeHNsTSYYtUWn61Ou").should == 8
-    BCrypt::Engine.autodetect_cost("$2a$05$XKd1bMnLgUnc87qvbAaCUu").should == 5
-    BCrypt::Engine.autodetect_cost("$2a$13$Lni.CZ6z5A7344POTFBBV.").should == 13
+    BCrypt::Engine.autodetect_cost("$2a$08$hRx2IVeHNsTSYYtUWn61Ou").should eq 8
+    BCrypt::Engine.autodetect_cost("$2a$05$XKd1bMnLgUnc87qvbAaCUu").should eq 5
+    BCrypt::Engine.autodetect_cost("$2a$13$Lni.CZ6z5A7344POTFBBV.").should eq 13
   end
 
 end

data/spec/bcrypt/password_spec.rb

@@ -39,9 +39,9 @@ describe "Reading a hashed password" do
     password.version.should eql("2a")
     password.cost.should equal(5)
     password.salt.should eql("$2a$05$CCCCCCCCCCCCCCCCCCCCC.")
-    password.salt.class.should == String
+    password.salt.class.should eq String
     password.checksum.should eq("E5YPO9kmyuRGyh0XouQYb4YMJKvyOeW")
-    password.checksum.class.should == String
+    password.checksum.class.should eq String
     password.to_s.should eql(@hash)
   end
 
@@ -65,3 +65,12 @@ describe "Comparing a hashed password with a secret" do
     (@password == "@secret").should be(false)
   end
 end
+
+describe "Validating a generated salt" do
+  specify "should not accept an invalid salt" do
+    BCrypt::Engine.valid_salt?("invalid").should eq(false)
+  end
+  specify "should accept a valid salt" do
+    BCrypt::Engine.valid_salt?(BCrypt::Engine.generate_salt).should eq(true)
+  end
+end

metadata

@@ -1,13 +1,13 @@
 --- !ruby/object:Gem::Specification 
 name: bcrypt-ruby
 version: !ruby/object:Gem::Version 
-  hash: 3
+  hash: 7
   prerelease: 
   segments: 
-  - 2
-  - 1
-  - 4
-  version: 2.1.4
+  - 3
+  - 0
+  - 0
+  version: 3.0.0
 platform: x86-mingw32
 authors: 
 - Coda Hale
@@ -15,8 +15,7 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2011-01-08 00:00:00 -08:00
-default_executable: 
+date: 2011-08-24 00:00:00 Z
 dependencies: 
 - !ruby/object:Gem::Dependency 
   name: rake-compiler
@@ -53,27 +52,32 @@ executables: []
 extensions: []
 
 extra_rdoc_files: 
-- README
+- README.md
 - COPYING
 - CHANGELOG
 - lib/bcrypt.rb
+- lib/bcrypt_engine.rb
 files: 
 - .gitignore
 - .rspec
 - CHANGELOG
 - COPYING
 - Gemfile
-- README
+- Gemfile.lock
+- README.md
 - Rakefile
 - bcrypt-ruby.gemspec
 - ext/jruby/bcrypt_jruby/BCrypt.java
-- ext/mri/bcrypt.c
-- ext/mri/bcrypt.h
 - ext/mri/bcrypt_ext.c
-- ext/mri/blf.h
-- ext/mri/blowfish.c
+- ext/mri/crypt.c
+- ext/mri/crypt.h
+- ext/mri/crypt_blowfish.c
+- ext/mri/crypt_gensalt.c
 - ext/mri/extconf.rb
+- ext/mri/ow-crypt.h
+- ext/mri/wrapper.c
 - lib/bcrypt.rb
+- lib/bcrypt_engine.rb
 - spec/TestBCrypt.java
 - spec/bcrypt/engine_spec.rb
 - spec/bcrypt/password_spec.rb
@@ -81,7 +85,6 @@ files:
 - lib/1.8/bcrypt_ext.so
 - lib/1.9/bcrypt_ext.so
 - lib/bcrypt_ext.rb
-has_rdoc: true
 homepage: http://bcrypt-ruby.rubyforge.org
 licenses: []
 
@@ -92,7 +95,7 @@ rdoc_options:
 - --line-numbers
 - --inline-source
 - --main
-- README
+- README.md
 require_paths: 
 - lib
 required_ruby_version: !ruby/object:Gem::Requirement 
@@ -116,7 +119,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
 requirements: []
 
 rubyforge_project: bcrypt-ruby
-rubygems_version: 1.4.0
+rubygems_version: 1.8.8
 signing_key: 
 specification_version: 3
 summary: OpenBSD's bcrypt() password hashing algorithm.

data/README

@@ -1,175 +0,0 @@
-= bcrypt-ruby
-
-An easy way to keep your users' passwords secure.
-
-* http://bcrypt-ruby.rubyforge.org/
-* http://github.com/codahale/bcrypt-ruby/tree/master
-
-== Why you should use bcrypt
-
-If you store user passwords in the clear, then an attacker who steals a copy of your database has a giant list of emails
-and passwords. Some of your users will only have one password -- for their email account, for their banking account, for
-your application. A simple hack could escalate into massive identity theft.
-
-It's your responsibility as a web developer to make your web application secure -- blaming your users for not being
-security experts is not a professional response to risk.
-
-bcrypt allows you to easily harden your application against these kinds of attacks.
-
-== How to install bcrypt
-
-  sudo gem install bcrypt-ruby
-  
-You'll need a working compiler. (Win32 folks should use Cygwin or um, something else.)
-
-== How to use bcrypt in your Rails application
-
-=== The +User+ model
-
-  require 'bcrypt'
-  
-  class User < ActiveRecord::Base
-    # users.password_hash in the database is a :string
-    include BCrypt
-    
-    def password
-      @password ||= Password.new(password_hash)
-    end
-    
-    def password=(new_password)
-      @password = Password.create(new_password)
-      self.password_hash = @password
-    end
-    
-  end
-
-=== Creating an account
-
-  def create
-    @user = User.new(params[:user])
-    @user.password = params[:password]
-    @user.save!
-  end
-
-=== Authenticating a user
-
-  def login
-    @user = User.find_by_email(params[:email])
-    if @user.password == params[:password]
-      give_token
-    else
-      redirect_to home_url
-    end
-  end
-
-=== If a user forgets their password?
-
-  # assign them a random one and mail it to them, asking them to change it
-  def forgot_password
-    @user = User.find_by_email(params[:email])
-    random_password = Array.new(10).map { (65 + rand(58)).chr }.join
-    @user.password = random_password
-    @user.save!
-    Mailer.create_and_deliver_password_change(@user, random_password)
-  end
-
-== How to use bcrypt-ruby in general
-
-  require 'bcrypt'
-  
-  my_password = BCrypt::Password.create("my password") #=> "$2a$10$vI8aWBnW3fID.ZQ4/zo1G.q1lRps.9cGLcZEiGDMVr5yUP1KUOYTa"
-  
-  my_password.version              #=> "2a"
-  my_password.cost                 #=> 10
-  my_password == "my password"     #=> true
-  my_password == "not my password" #=> false
-  
-  my_password = BCrypt::Password.new("$2a$10$vI8aWBnW3fID.ZQ4/zo1G.q1lRps.9cGLcZEiGDMVr5yUP1KUOYTa")
-  my_password == "my password"     #=> true
-  my_password == "not my password" #=> false
-
-Check the rdocs for more details -- BCrypt, BCrypt::Password.
-
-== How bcrypt() works
-
-bcrypt() is a hashing algorithm designed by Niels Provos and David Mazières of the OpenBSD Project.
-
-=== Background
-
-Hash algorithms take a chunk of data (e.g., your user's password) and create a "digital fingerprint," or hash, of it.
-Because this process is not reversible, there's no way to go from the hash back to the password.
-
-In other words:
-
-  hash(p) #=> <unique gibberish>
-
-You can store the hash and check it against a hash made of a potentially valid password:
-
-  <unique gibberish> =? hash(just_entered_password)
-
-=== Rainbow Tables
-
-But even this has weaknesses -- attackers can just run lists of possible passwords through the same algorithm, store the
-results in a big database, and then look up the passwords by their hash:
-
-  PrecomputedPassword.find_by_hash(<unique gibberish>).password #=> "secret1"
-
-=== Salts
-
-The solution to this is to add a small chunk of random data -- called a salt -- to the password before it's hashed:
-
-  hash(salt + p) #=> <really unique gibberish>
-
-The salt is then stored along with the hash in the database, and used to check potentially valid passwords:
-
-  <really unique gibberish> =? hash(salt + just_entered_password)
-  
-bcrypt-ruby automatically handles the storage and generation of these salts for you.
-
-Adding a salt means that an attacker has to have a gigantic database for each unique salt -- for a salt made of 4
-letters, that's 456,976 different databases. Pretty much no one has that much storage space, so attackers try a
-different, slower method -- throw a list of potential passwords at each individual password:
-
-  hash(salt + "aadvark") =? <really unique gibberish>
-  hash(salt + "abacus")  =? <really unique gibberish>
-  etc.
-  
-This is much slower than the big database approach, but most hash algorithms are pretty quick -- and therein lies the
-problem. Hash algorithms aren't usually designed to be slow, they're designed to turn gigabytes of data into secure
-fingerprints as quickly as possible. bcrypt(), though, is designed to be computationally expensive:
-
-  Ten thousand iterations:
-               user     system      total        real
-  md5      0.070000   0.000000   0.070000 (  0.070415)
-  bcrypt  22.230000   0.080000  22.310000 ( 22.493822)
-
-If an attacker was using Ruby to check each password, they could check ~140,000 passwords a second with MD5 but only
-~450 passwords a second with bcrypt().
-
-=== Cost Factors
-
-In addition, bcrypt() allows you to increase the amount of work required to hash a password as computers get faster. Old
-passwords will still work fine, but new passwords can keep up with the times.
-
-The default cost factor used by bcrypt-ruby is 10, which is fine for session-based authentication. If you are using a
-stateless authentication architecture (e.g., HTTP Basic Auth), you will want to lower the cost factor to reduce your
-server load and keep your request times down. This will lower the security provided you, but there are few alternatives.
-
-== More Information
-
-bcrypt() is currently used as the default password storage hash in OpenBSD, widely regarded as the most secure operating
-system available. 
-
-
-For a more technical explanation of the algorithm and its design criteria, please read Niels Provos and David Mazières'
-Usenix99 paper:
-http://www.usenix.org/events/usenix99/provos.html
-
-If you'd like more down-to-earth advice regarding cryptography, I suggest reading <i>Practical Cryptography</i> by Niels
-Ferguson and Bruce Schneier:
-http://www.schneier.com/book-practical.html
-
-= Etc
-
-Author  :: Coda Hale <coda.hale@gmail.com>
-Website :: http://blog.codahale.com

data/ext/mri/bcrypt.c

@@ -1,297 +0,0 @@
-/*	$OpenBSD: bcrypt.c,v 1.22 2007/02/20 01:44:16 ray Exp $	*/
-
-/* 
- * Modified by <coda.hale@gmail.com> on 2009-09-16:
- *
- *   - Standardized on stdint.h's numerical types and removed some debug cruft.
- *
- * Modified by <hongli@phusion.nl> on 2009-08-05:
- *
- *   - Got rid of the global variables; they're not thread-safe.
- *     Modified the functions to accept local buffers instead.
- *
- * Modified by <coda.hale@gmail.com> on 2007-02-27:
- *
- *   - Changed bcrypt_gensalt to accept a random seed as a parameter,
- *     to remove the code's dependency on arc4random(), which isn't
- *     available on Linux. 
- */
-
-/*
- * Copyright 1997 Niels Provos <provos@physnet.uni-hamburg.de>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Niels Provos.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* This password hashing algorithm was designed by David Mazieres
- * <dm@lcs.mit.edu> and works as follows:
- *
- * 1. state := InitState ()
- * 2. state := ExpandKey (state, salt, password) 3.
- * REPEAT rounds:
- *	state := ExpandKey (state, 0, salt)
- *      state := ExpandKey(state, 0, password)
- * 4. ctext := "OrpheanBeholderScryDoubt"
- * 5. REPEAT 64:
- * 	ctext := Encrypt_ECB (state, ctext);
- * 6. RETURN Concatenate (salt, ctext);
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "blf.h"
-#include "bcrypt.h"
-
-/* This implementation is adaptable to current computing power.
- * You can have up to 2^31 rounds which should be enough for some
- * time to come.
- */
-
-static void encode_salt(char *, uint8_t *, uint16_t, uint8_t);
-static void encode_base64(uint8_t *, uint8_t *, uint16_t);
-static void decode_base64(uint8_t *, uint16_t, uint8_t *);
-
-static const uint8_t Base64Code[] =
-"./ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789";
-
-static const uint8_t index_64[128] = {
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 0, 1, 54, 55,
-	56, 57, 58, 59, 60, 61, 62, 63, 255, 255,
-	255, 255, 255, 255, 255, 2, 3, 4, 5, 6,
-	7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
-	17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,
-	255, 255, 255, 255, 255, 255, 28, 29, 30,
-	31, 32, 33, 34, 35, 36, 37, 38, 39, 40,
-	41, 42, 43, 44, 45, 46, 47, 48, 49, 50,
-	51, 52, 53, 255, 255, 255, 255, 255
-};
-#define CHAR64(c)  ( (c) > 127 ? 255 : index_64[(c)])
-
-static void
-decode_base64(uint8_t *buffer, uint16_t len, uint8_t *data)
-{
-	uint8_t *bp = buffer;
-	uint8_t *p = data;
-	uint8_t c1, c2, c3, c4;
-	while (bp < buffer + len) {
-		c1 = CHAR64(*p);
-		c2 = CHAR64(*(p + 1));
-
-		/* Invalid data */
-		if (c1 == 255 || c2 == 255)
-			break;
-
-		*bp++ = (c1 << 2) | ((c2 & 0x30) >> 4);
-		if (bp >= buffer + len)
-			break;
-
-		c3 = CHAR64(*(p + 2));
-		if (c3 == 255)
-			break;
-
-		*bp++ = ((c2 & 0x0f) << 4) | ((c3 & 0x3c) >> 2);
-		if (bp >= buffer + len)
-			break;
-
-		c4 = CHAR64(*(p + 3));
-		if (c4 == 255)
-			break;
-		*bp++ = ((c3 & 0x03) << 6) | c4;
-
-		p += 4;
-	}
-}
-
-static void
-encode_salt(char *salt, uint8_t *csalt, uint16_t clen, uint8_t logr)
-{
-	salt[0] = '$';
-	salt[1] = BCRYPT_VERSION;
-	salt[2] = 'a';
-	salt[3] = '$';
-
-	snprintf(salt + 4, 4, "%2.2u$", logr);
-
-	encode_base64((uint8_t *) salt + 7, csalt, clen);
-}
-/* Generates a salt for this version of crypt.
-   Since versions may change. Keeping this here
-   seems sensible.
- */
-
-char   *
-ruby_bcrypt_gensalt(char *output, uint8_t log_rounds, uint8_t *rseed)
-{
-	if (log_rounds < 4)
-		log_rounds = 4;
-	else if (log_rounds > 31)
-		log_rounds = 31;
-
-	encode_salt(output, rseed, BCRYPT_MAXSALT, log_rounds);
-	return output;
-}
-/* We handle $Vers$log2(NumRounds)$salt+passwd$
-   i.e. $2$04$iwouldntknowwhattosayetKdJ6iFtacBqJdKe6aW7ou */
-
-char   *
-ruby_bcrypt(char *output, const char *key, const char *salt)
-{
-	blf_ctx state;
-	uint32_t rounds, i, k;
-	uint16_t j;
-	uint8_t key_len, salt_len, logr, minor;
-	uint8_t ciphertext[4 * BCRYPT_BLOCKS] = "OrpheanBeholderScryDoubt";
-	uint8_t csalt[BCRYPT_MAXSALT];
-	uint32_t cdata[BCRYPT_BLOCKS];
-	int n;
-
-	/* Discard "$" identifier */
-	salt++;
-
-	if (*salt > BCRYPT_VERSION) {
-		return NULL;
-	}
-
-	/* Check for minor versions */
-	if (salt[1] != '$') {
-		 switch (salt[1]) {
-		 case 'a':
-			 /* 'ab' should not yield the same as 'abab' */
-			 minor = salt[1];
-			 salt++;
-			 break;
-		 default:
-			 return NULL;
-		 }
-	} else
-		 minor = 0;
-
-	/* Discard version + "$" identifier */
-	salt += 2;
-
-	if (salt[2] != '$')
-		/* Out of sync with passwd entry */
-		return NULL;
-
-	/* Computer power doesn't increase linear, 2^x should be fine */
-	n = atoi(salt);
-	if (n > 31 || n < 0)
-		return NULL;
-	logr = (uint8_t)n;
-	if ((rounds = (uint32_t) 1 << logr) < BCRYPT_MINROUNDS)
-		return NULL;
-
-	/* Discard num rounds + "$" identifier */
-	salt += 3;
-
-	if (strlen(salt) * 3 / 4 < BCRYPT_MAXSALT)
-		return NULL;
-
-	/* We dont want the base64 salt but the raw data */
-	decode_base64(csalt, BCRYPT_MAXSALT, (uint8_t *) salt);
-	salt_len = BCRYPT_MAXSALT;
-	key_len = strlen(key) + (minor >= 'a' ? 1 : 0);
-
-	/* Setting up S-Boxes and Subkeys */
-	Blowfish_initstate(&state);
-	Blowfish_expandstate(&state, csalt, salt_len,
-	    (uint8_t *) key, key_len);
-	for (k = 0; k < rounds; k++) {
-		Blowfish_expand0state(&state, (uint8_t *) key, key_len);
-		Blowfish_expand0state(&state, csalt, salt_len);
-	}
-
-	/* This can be precomputed later */
-	j = 0;
-	for (i = 0; i < BCRYPT_BLOCKS; i++)
-		cdata[i] = Blowfish_stream2word(ciphertext, 4 * BCRYPT_BLOCKS, &j);
-
-	/* Now do the encryption */
-	for (k = 0; k < 64; k++)
-		blf_enc(&state, cdata, BCRYPT_BLOCKS / 2);
-
-	for (i = 0; i < BCRYPT_BLOCKS; i++) {
-		ciphertext[4 * i + 3] = cdata[i] & 0xff;
-		cdata[i] = cdata[i] >> 8;
-		ciphertext[4 * i + 2] = cdata[i] & 0xff;
-		cdata[i] = cdata[i] >> 8;
-		ciphertext[4 * i + 1] = cdata[i] & 0xff;
-		cdata[i] = cdata[i] >> 8;
-		ciphertext[4 * i + 0] = cdata[i] & 0xff;
-	}
-
-
-	i = 0;
-	output[i++] = '$';
-	output[i++] = BCRYPT_VERSION;
-	if (minor)
-		output[i++] = minor;
-	output[i++] = '$';
-
-	snprintf(output + i, 4, "%2.2u$", logr);
-
-	encode_base64((uint8_t *) output + i + 3, csalt, BCRYPT_MAXSALT);
-	encode_base64((uint8_t *) output + strlen(output), ciphertext,
-	    4 * BCRYPT_BLOCKS - 1);
-	return output;
-}
-
-static void
-encode_base64(uint8_t *buffer, uint8_t *data, uint16_t len)
-{
-	uint8_t *bp = buffer;
-	uint8_t *p = data;
-	uint8_t c1, c2;
-	while (p < data + len) {
-		c1 = *p++;
-		*bp++ = Base64Code[(c1 >> 2)];
-		c1 = (c1 & 0x03) << 4;
-		if (p >= data + len) {
-			*bp++ = Base64Code[c1];
-			break;
-		}
-		c2 = *p++;
-		c1 |= (c2 >> 4) & 0x0f;
-		*bp++ = Base64Code[c1];
-		c1 = (c2 & 0x0f) << 2;
-		if (p >= data + len) {
-			*bp++ = Base64Code[c1];
-			break;
-		}
-		c2 = *p++;
-		c1 |= (c2 >> 6) & 0x03;
-		*bp++ = Base64Code[c1];
-		*bp++ = Base64Code[c2 & 0x3f];
-	}
-	*bp = '\0';
-}