bcms_fckeditor 1.0.0

data/LICENSE.txt

@@ -0,0 +1,165 @@
+		   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions. 
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version. 
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

data/README

@@ -0,0 +1,243 @@
+== Welcome to Rails
+
+Rails is a web-application framework that includes everything needed to create 
+database-backed web applications according to the Model-View-Control pattern. 
+
+This pattern splits the view (also called the presentation) into "dumb" templates
+that are primarily responsible for inserting pre-built data in between HTML tags.
+The model contains the "smart" domain objects (such as Account, Product, Person,
+Post) that holds all the business logic and knows how to persist themselves to
+a database. The controller handles the incoming requests (such as Save New Account,
+Update Product, Show Post) by manipulating the model and directing data to the view.
+
+In Rails, the model is handled by what's called an object-relational mapping
+layer entitled Active Record. This layer allows you to present the data from
+database rows as objects and embellish these data objects with business logic
+methods. You can read more about Active Record in
+link:files/vendor/rails/activerecord/README.html.
+
+The controller and view are handled by the Action Pack, which handles both
+layers by its two parts: Action View and Action Controller. These two layers
+are bundled in a single package due to their heavy interdependence. This is
+unlike the relationship between the Active Record and Action Pack that is much
+more separate. Each of these packages can be used independently outside of
+Rails.  You can read more about Action Pack in
+link:files/vendor/rails/actionpack/README.html.
+
+
+== Getting Started
+
+1. At the command prompt, start a new Rails application using the <tt>rails</tt> command
+   and your application name. Ex: rails myapp
+2. Change directory into myapp and start the web server: <tt>script/server</tt> (run with --help for options)
+3. Go to http://localhost:3000/ and get "Welcome aboard: You're riding the Rails!"
+4. Follow the guidelines to start developing your application
+
+
+== Web Servers
+
+By default, Rails will try to use Mongrel if it's are installed when started with script/server, otherwise Rails will use WEBrick, the webserver that ships with Ruby. But you can also use Rails
+with a variety of other web servers.
+
+Mongrel is a Ruby-based webserver with a C component (which requires compilation) that is
+suitable for development and deployment of Rails applications. If you have Ruby Gems installed,
+getting up and running with mongrel is as easy as: <tt>gem install mongrel</tt>.
+More info at: http://mongrel.rubyforge.org
+
+Say other Ruby web servers like Thin and Ebb or regular web servers like Apache or LiteSpeed or
+Lighttpd or IIS. The Ruby web servers are run through Rack and the latter can either be setup to use
+FCGI or proxy to a pack of Mongrels/Thin/Ebb servers.
+
+== Apache .htaccess example for FCGI/CGI
+
+# General Apache options
+AddHandler fastcgi-script .fcgi
+AddHandler cgi-script .cgi
+Options +FollowSymLinks +ExecCGI
+
+# If you don't want Rails to look in certain directories,
+# use the following rewrite rules so that Apache won't rewrite certain requests
+# 
+# Example:
+#   RewriteCond %{REQUEST_URI} ^/notrails.*
+#   RewriteRule .* - [L]
+
+# Redirect all requests not available on the filesystem to Rails
+# By default the cgi dispatcher is used which is very slow
+# 
+# For better performance replace the dispatcher with the fastcgi one
+#
+# Example:
+#   RewriteRule ^(.*)$ dispatch.fcgi [QSA,L]
+RewriteEngine On
+
+# If your Rails application is accessed via an Alias directive,
+# then you MUST also set the RewriteBase in this htaccess file.
+#
+# Example:
+#   Alias /myrailsapp /path/to/myrailsapp/public
+#   RewriteBase /myrailsapp
+
+RewriteRule ^$ index.html [QSA]
+RewriteRule ^([^.]+)$ $1.html [QSA]
+RewriteCond %{REQUEST_FILENAME} !-f
+RewriteRule ^(.*)$ dispatch.cgi [QSA,L]
+
+# In case Rails experiences terminal errors
+# Instead of displaying this message you can supply a file here which will be rendered instead
+# 
+# Example:
+#   ErrorDocument 500 /500.html
+
+ErrorDocument 500 "<h2>Application error</h2>Rails application failed to start properly"
+
+
+== Debugging Rails
+
+Sometimes your application goes wrong.  Fortunately there are a lot of tools that
+will help you debug it and get it back on the rails.
+
+First area to check is the application log files.  Have "tail -f" commands running
+on the server.log and development.log. Rails will automatically display debugging
+and runtime information to these files. Debugging info will also be shown in the
+browser on requests from 127.0.0.1.
+
+You can also log your own messages directly into the log file from your code using
+the Ruby logger class from inside your controllers. Example:
+
+  class WeblogController < ActionController::Base
+    def destroy
+      @weblog = Weblog.find(params[:id])
+      @weblog.destroy
+      logger.info("#{Time.now} Destroyed Weblog ID ##{@weblog.id}!")
+    end
+  end
+
+The result will be a message in your log file along the lines of:
+
+  Mon Oct 08 14:22:29 +1000 2007 Destroyed Weblog ID #1
+
+More information on how to use the logger is at http://www.ruby-doc.org/core/
+
+Also, Ruby documentation can be found at http://www.ruby-lang.org/ including:
+
+* The Learning Ruby (Pickaxe) Book: http://www.ruby-doc.org/docs/ProgrammingRuby/
+* Learn to Program: http://pine.fm/LearnToProgram/  (a beginners guide)
+
+These two online (and free) books will bring you up to speed on the Ruby language
+and also on programming in general.
+
+
+== Debugger
+
+Debugger support is available through the debugger command when you start your Mongrel or
+Webrick server with --debugger. This means that you can break out of execution at any point
+in the code, investigate and change the model, AND then resume execution! 
+You need to install ruby-debug to run the server in debugging mode. With gems, use 'gem install ruby-debug'
+Example:
+
+  class WeblogController < ActionController::Base
+    def index
+      @posts = Post.find(:all)
+      debugger
+    end
+  end
+
+So the controller will accept the action, run the first line, then present you
+with a IRB prompt in the server window. Here you can do things like:
+
+  >> @posts.inspect
+  => "[#<Post:0x14a6be8 @attributes={\"title\"=>nil, \"body\"=>nil, \"id\"=>\"1\"}>,
+       #<Post:0x14a6620 @attributes={\"title\"=>\"Rails you know!\", \"body\"=>\"Only ten..\", \"id\"=>\"2\"}>]"
+  >> @posts.first.title = "hello from a debugger"
+  => "hello from a debugger"
+
+...and even better is that you can examine how your runtime objects actually work:
+
+  >> f = @posts.first
+  => #<Post:0x13630c4 @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>
+  >> f.
+  Display all 152 possibilities? (y or n)
+
+Finally, when you're ready to resume execution, you enter "cont"
+
+
+== Console
+
+You can interact with the domain model by starting the console through <tt>script/console</tt>.
+Here you'll have all parts of the application configured, just like it is when the
+application is running. You can inspect domain models, change values, and save to the
+database. Starting the script without arguments will launch it in the development environment.
+Passing an argument will specify a different environment, like <tt>script/console production</tt>.
+
+To reload your controllers and models after launching the console run <tt>reload!</tt>
+
+== dbconsole
+
+You can go to the command line of your database directly through <tt>script/dbconsole</tt>.
+You would be connected to the database with the credentials defined in database.yml.
+Starting the script without arguments will connect you to the development database. Passing an
+argument will connect you to a different database, like <tt>script/dbconsole production</tt>.
+Currently works for mysql, postgresql and sqlite.
+
+== Description of Contents
+
+app
+  Holds all the code that's specific to this particular application.
+
+app/controllers
+  Holds controllers that should be named like weblogs_controller.rb for
+  automated URL mapping. All controllers should descend from ApplicationController
+  which itself descends from ActionController::Base.
+
+app/models
+  Holds models that should be named like post.rb.
+  Most models will descend from ActiveRecord::Base.
+
+app/views
+  Holds the template files for the view that should be named like
+  weblogs/index.html.erb for the WeblogsController#index action. All views use eRuby
+  syntax.
+
+app/views/layouts
+  Holds the template files for layouts to be used with views. This models the common
+  header/footer method of wrapping views. In your views, define a layout using the
+  <tt>layout :default</tt> and create a file named default.html.erb. Inside default.html.erb,
+  call <% yield %> to render the view using this layout.
+
+app/helpers
+  Holds view helpers that should be named like weblogs_helper.rb. These are generated
+  for you automatically when using script/generate for controllers. Helpers can be used to
+  wrap functionality for your views into methods.
+
+config
+  Configuration files for the Rails environment, the routing map, the database, and other dependencies.
+
+db
+  Contains the database schema in schema.rb.  db/migrate contains all
+  the sequence of Migrations for your schema.
+
+doc
+  This directory is where your application documentation will be stored when generated
+  using <tt>rake doc:app</tt>
+
+lib
+  Application specific libraries. Basically, any kind of custom code that doesn't
+  belong under controllers, models, or helpers. This directory is in the load path.
+
+public
+  The directory available for the web server. Contains subdirectories for images, stylesheets,
+  and javascripts. Also contains the dispatchers and the default HTML files. This should be
+  set as the DOCUMENT_ROOT of your web server.
+
+script
+  Helper scripts for automation and generation.
+
+test
+  Unit and functional tests along with fixtures. When using the script/generate scripts, template
+  test files will be generated for you and placed in this directory.
+
+vendor
+  External libraries that the application depends on. Also includes the plugins subdirectory.
+  If the app has frozen rails, those gems also go here, under vendor/rails/.
+  This directory is in the load path.

data/README.markdown

@@ -0,0 +1,30 @@
+# BrowserCMS FCKEditor WYSIWIG editor module
+
+Installing this module will make change the WYSIWIG editor from the default CKEditor to FCKEditor 2.6.3 for editing Html Blocks.
+
+## A.Instructions
+1. Install the module
+2. Configure the styles to match your needs
+
+## B.Module Installation
+Install the gem
+>sudo gem install bcms_fckeditor
+
+Configure your project to use the gem by adding
+config.gem 'bcms_fckeditor'
+to {RAILS_ROOT}/config/environment.rb
+
+Add the necessary project files to your application
+>script/generate browser_cms
+
+## C.Editor configuration
+One of the files the gem will add to your application is
+{RAILS_ROOT}/public/bcms_config/fckeditor/fckstyles.xml
+
+You can change the styles that are directly available in the editor by changing this file.  It is put in this directory to allow you to edit it without worry that it will be overwritten by the gem.
+
+## D.Tips for building your own WYSIWIG module
+If you would prefer to build your own WYSIWIG module, you will need to tell the CMS to use your javascript instead of the FCKEditor (or CKEditor) javascript.  This configuration is set in #{RAILS_ROOT}/lib/bcms_fckeditor.rb
+Cms.wysiwig_js = ['/bcms/fckeditor/fckeditor.js', '/bcms/fckeditor/editor.js']
+
+This statement sets the source of the javascript files for script tags in the head of the content-edit pages.

data/Rakefile

@@ -0,0 +1,32 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require(File.join(File.dirname(__FILE__), 'config', 'boot'))
+
+require 'rake'
+require 'rake/testtask'
+require 'rake/rdoctask'
+
+require 'tasks/rails'
+begin
+  require 'jeweler'
+  Jeweler::Tasks.new do |gem|
+    gem.name = "bcms_fckeditor"
+    gem.summary = %Q{A module for replacing the default WYSIWIG editor of browsercms with FCKEditor 2.6.3.}
+    gem.description = %Q{WYSIWIG editor for browsercms.}
+    gem.email = "github@browsermedia.com"
+    gem.homepage = "http://www.browsercms.org"
+    gem.authors = ["BrowserMedia"]
+    gem.rubyforge_project = 'bcms_fckeditor'
+    gem.files += Dir["public/bcms/fckeditor/**/*"]
+    gem.files += Dir["public/bcms_config/fckeditor/fckstyles.xml"]
+    gem.files += Dir["lib/bcms_fckeditor.rb"]
+    gem.files += Dir["lib/bcms_fckeditor/*"]
+    gem.files += Dir["rails/init.rb"]
+
+
+    # gem is a Gem::Specification... see http://www.rubygems.org/read/chapter/20 for additional settings
+  end
+rescue LoadError
+  puts "Jeweler not available. Install it with: sudo gem install technicalpickles-jeweler -s http://gems.github.com"
+end

data/VERSION

@@ -0,0 +1 @@
+1.0.0

data/app/controllers/application_controller.rb

@@ -0,0 +1,10 @@
+# Filters added to this controller apply to all controllers in the application.
+# Likewise, all the methods added will be available for all controllers.
+
+class ApplicationController < ActionController::Base
+  helper :all # include all helpers, all the time
+  protect_from_forgery # See ActionController::RequestForgeryProtection for details
+
+  # Scrub sensitive parameters from your log
+  # filter_parameter_logging :password
+end

data/app/helpers/application_helper.rb

@@ -0,0 +1,3 @@
+# Methods added to this helper will be available to all templates in the application.
+module ApplicationHelper
+end