bcms_contact_us 1.0.0

data/Gemfile

@@ -0,0 +1,33 @@
+source 'http://rubygems.org'
+
+gem 'rails', '3.0.10'
+
+# Bundle edge Rails instead:
+# gem 'rails', :git => 'git://github.com/rails/rails.git'
+
+gem 'mysql2', '~> 0.2.11'
+
+# Use unicorn as the web server
+# gem 'unicorn'
+
+# Deploy with Capistrano
+# gem 'capistrano'
+
+# To use debugger (ruby-debug for Ruby 1.8.7+, ruby-debug19 for Ruby 1.9.2+)
+# gem 'ruby-debug'
+# gem 'ruby-debug19', :require => 'ruby-debug'
+
+# Bundle the extra gems:
+# gem 'bj'
+# gem 'nokogiri'
+# gem 'sqlite3-ruby', :require => 'sqlite3'
+# gem 'aws-s3', :require => 'aws/s3'
+
+# Bundle gems for the local environment. Make sure to
+# put test-only gems in this group so their generators
+# and rake tasks are available in development mode:
+# group :development, :test do
+#   gem 'webrat'
+# end
+gem "browsercms", :git => "git://github.com/tavon/browsercms.git", :tag => "v3.3.2"
+gemspec

data/LICENSE.txt

@@ -0,0 +1,165 @@
+		   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

data/README

@@ -0,0 +1,256 @@
+== Welcome to Rails
+
+Rails is a web-application framework that includes everything needed to create
+database-backed web applications according to the Model-View-Control pattern.
+
+This pattern splits the view (also called the presentation) into "dumb"
+templates that are primarily responsible for inserting pre-built data in between
+HTML tags. The model contains the "smart" domain objects (such as Account,
+Product, Person, Post) that holds all the business logic and knows how to
+persist themselves to a database. The controller handles the incoming requests
+(such as Save New Account, Update Product, Show Post) by manipulating the model
+and directing data to the view.
+
+In Rails, the model is handled by what's called an object-relational mapping
+layer entitled Active Record. This layer allows you to present the data from
+database rows as objects and embellish these data objects with business logic
+methods. You can read more about Active Record in
+link:files/vendor/rails/activerecord/README.html.
+
+The controller and view are handled by the Action Pack, which handles both
+layers by its two parts: Action View and Action Controller. These two layers
+are bundled in a single package due to their heavy interdependence. This is
+unlike the relationship between the Active Record and Action Pack that is much
+more separate. Each of these packages can be used independently outside of
+Rails. You can read more about Action Pack in
+link:files/vendor/rails/actionpack/README.html.
+
+
+== Getting Started
+
+1. At the command prompt, create a new Rails application:
+       <tt>rails new myapp</tt> (where <tt>myapp</tt> is the application name)
+
+2. Change directory to <tt>myapp</tt> and start the web server:
+       <tt>cd myapp; rails server</tt> (run with --help for options)
+
+3. Go to http://localhost:3000/ and you'll see:
+       "Welcome aboard: You're riding Ruby on Rails!"
+
+4. Follow the guidelines to start developing your application. You can find
+the following resources handy:
+
+* The Getting Started Guide: http://guides.rubyonrails.org/getting_started.html
+* Ruby on Rails Tutorial Book: http://www.railstutorial.org/
+
+
+== Debugging Rails
+
+Sometimes your application goes wrong. Fortunately there are a lot of tools that
+will help you debug it and get it back on the rails.
+
+First area to check is the application log files. Have "tail -f" commands
+running on the server.log and development.log. Rails will automatically display
+debugging and runtime information to these files. Debugging info will also be
+shown in the browser on requests from 127.0.0.1.
+
+You can also log your own messages directly into the log file from your code
+using the Ruby logger class from inside your controllers. Example:
+
+  class WeblogController < ActionController::Base
+    def destroy
+      @weblog = Weblog.find(params[:id])
+      @weblog.destroy
+      logger.info("#{Time.now} Destroyed Weblog ID ##{@weblog.id}!")
+    end
+  end
+
+The result will be a message in your log file along the lines of:
+
+  Mon Oct 08 14:22:29 +1000 2007 Destroyed Weblog ID #1!
+
+More information on how to use the logger is at http://www.ruby-doc.org/core/
+
+Also, Ruby documentation can be found at http://www.ruby-lang.org/. There are
+several books available online as well:
+
+* Programming Ruby: http://www.ruby-doc.org/docs/ProgrammingRuby/ (Pickaxe)
+* Learn to Program: http://pine.fm/LearnToProgram/ (a beginners guide)
+
+These two books will bring you up to speed on the Ruby language and also on
+programming in general.
+
+
+== Debugger
+
+Debugger support is available through the debugger command when you start your
+Mongrel or WEBrick server with --debugger. This means that you can break out of
+execution at any point in the code, investigate and change the model, and then,
+resume execution! You need to install ruby-debug to run the server in debugging
+mode. With gems, use <tt>sudo gem install ruby-debug</tt>. Example:
+
+  class WeblogController < ActionController::Base
+    def index
+      @posts = Post.find(:all)
+      debugger
+    end
+  end
+
+So the controller will accept the action, run the first line, then present you
+with a IRB prompt in the server window. Here you can do things like:
+
+  >> @posts.inspect
+  => "[#<Post:0x14a6be8
+          @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>,
+       #<Post:0x14a6620
+          @attributes={"title"=>"Rails", "body"=>"Only ten..", "id"=>"2"}>]"
+  >> @posts.first.title = "hello from a debugger"
+  => "hello from a debugger"
+
+...and even better, you can examine how your runtime objects actually work:
+
+  >> f = @posts.first
+  => #<Post:0x13630c4 @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>
+  >> f.
+  Display all 152 possibilities? (y or n)
+
+Finally, when you're ready to resume execution, you can enter "cont".
+
+
+== Console
+
+The console is a Ruby shell, which allows you to interact with your
+application's domain model. Here you'll have all parts of the application
+configured, just like it is when the application is running. You can inspect
+domain models, change values, and save to the database. Starting the script
+without arguments will launch it in the development environment.
+
+To start the console, run <tt>rails console</tt> from the application
+directory.
+
+Options:
+
+* Passing the <tt>-s, --sandbox</tt> argument will rollback any modifications
+  made to the database.
+* Passing an environment name as an argument will load the corresponding
+  environment. Example: <tt>rails console production</tt>.
+
+To reload your controllers and models after launching the console run
+<tt>reload!</tt>
+
+More information about irb can be found at:
+link:http://www.rubycentral.com/pickaxe/irb.html
+
+
+== dbconsole
+
+You can go to the command line of your database directly through <tt>rails
+dbconsole</tt>. You would be connected to the database with the credentials
+defined in database.yml. Starting the script without arguments will connect you
+to the development database. Passing an argument will connect you to a different
+database, like <tt>rails dbconsole production</tt>. Currently works for MySQL,
+PostgreSQL and SQLite 3.
+
+== Description of Contents
+
+The default directory structure of a generated Ruby on Rails application:
+
+  |-- app
+  |   |-- controllers
+  |   |-- helpers
+  |   |-- mailers
+  |   |-- models
+  |   `-- views
+  |       `-- layouts
+  |-- config
+  |   |-- environments
+  |   |-- initializers
+  |   `-- locales
+  |-- db
+  |-- doc
+  |-- lib
+  |   `-- tasks
+  |-- log
+  |-- public
+  |   |-- images
+  |   |-- javascripts
+  |   `-- stylesheets
+  |-- script
+  |-- test
+  |   |-- fixtures
+  |   |-- functional
+  |   |-- integration
+  |   |-- performance
+  |   `-- unit
+  |-- tmp
+  |   |-- cache
+  |   |-- pids
+  |   |-- sessions
+  |   `-- sockets
+  `-- vendor
+      `-- plugins
+
+app
+  Holds all the code that's specific to this particular application.
+
+app/controllers
+  Holds controllers that should be named like weblogs_controller.rb for
+  automated URL mapping. All controllers should descend from
+  ApplicationController which itself descends from ActionController::Base.
+
+app/models
+  Holds models that should be named like post.rb. Models descend from
+  ActiveRecord::Base by default.
+
+app/views
+  Holds the template files for the view that should be named like
+  weblogs/index.html.erb for the WeblogsController#index action. All views use
+  eRuby syntax by default.
+
+app/views/layouts
+  Holds the template files for layouts to be used with views. This models the
+  common header/footer method of wrapping views. In your views, define a layout
+  using the <tt>layout :default</tt> and create a file named default.html.erb.
+  Inside default.html.erb, call <% yield %> to render the view using this
+  layout.
+
+app/helpers
+  Holds view helpers that should be named like weblogs_helper.rb. These are
+  generated for you automatically when using generators for controllers.
+  Helpers can be used to wrap functionality for your views into methods.
+
+config
+  Configuration files for the Rails environment, the routing map, the database,
+  and other dependencies.
+
+db
+  Contains the database schema in schema.rb. db/migrate contains all the
+  sequence of Migrations for your schema.
+
+doc
+  This directory is where your application documentation will be stored when
+  generated using <tt>rake doc:app</tt>
+
+lib
+  Application specific libraries. Basically, any kind of custom code that
+  doesn't belong under controllers, models, or helpers. This directory is in
+  the load path.
+
+public
+  The directory available for the web server. Contains subdirectories for
+  images, stylesheets, and javascripts. Also contains the dispatchers and the
+  default HTML files. This should be set as the DOCUMENT_ROOT of your web
+  server.
+
+script
+  Helper scripts for automation and generation.
+
+test
+  Unit and functional tests along with fixtures. When using the rails generate
+  command, template test files will be generated for you and placed in this
+  directory.
+
+vendor
+  External libraries that the application depends on. Also includes the plugins
+  subdirectory. If the app has frozen rails, those gems also go here, under
+  vendor/rails/. This directory is in the load path.

data/app/controllers/application_controller.rb

@@ -0,0 +1,3 @@
+class ApplicationController < ActionController::Base
+  protect_from_forgery
+end

data/app/controllers/cms/contacts_controller.rb

@@ -0,0 +1,2 @@
+class Cms::ContactsController < Cms::ContentBlockController
+end

data/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/app/models/contact.rb

@@ -0,0 +1,10 @@
+class Contact < ActiveRecord::Base
+  acts_as_content_block
+
+  validates_presence_of :first_name
+  validates_presence_of :last_name
+  validates_presence_of :email
+  validates_presence_of :phone_number
+  validates_presence_of :title
+  validates_presence_of :message
+end

data/app/portlets/contact_form_portlet.rb

@@ -0,0 +1,22 @@
+class ContactFormPortlet < Portlet
+
+  # Mark this as 'true' to allow the portlet's template to be editable via the CMS admin UI.
+  enable_template_editor false
+
+  def render
+    @contact = Contact.new
+    @contact.errors.add_from_hash flash["#{instance_name}_errors"]
+  end
+
+  def submit
+    @contact = Contact.new(params[:contact])
+
+    if @contact.save
+      url_for_success
+    else
+      store_params_in_flash
+      store_errors_in_flash(@contact.errors)
+      url_for_failure
+    end
+  end
+end

data/app/portlets/helpers/contact_form_portlet_helper.rb

@@ -0,0 +1,5 @@
+##
+# All methods from this helper will be available in the render.html.erb for ContactFormPortlet
+module ContactFormPortletHelper
+  
+end

data/app/views/cms/contacts/_form.html.erb

@@ -0,0 +1,7 @@
+
+<%= f.cms_text_field :first_name %>
+<%= f.cms_text_field :last_name %>
+<%= f.cms_text_field :email %>
+<%= f.cms_text_field :phone_number %>
+<%= f.cms_text_field :title %>
+<%= f.cms_text_area :message %>

data/app/views/cms/contacts/render.html.erb

@@ -0,0 +1,7 @@
+
+<p><b>First Name:</b> <%= @content_block.first_name %></p>
+<p><b>Last Name:</b> <%= @content_block.last_name %></p>
+<p><b>Email:</b> <%= @content_block.email %></p>
+<p><b>Phone Number:</b> <%= @content_block.phone_number %></p>
+<p><b>Title:</b> <%= @content_block.title %></p>
+<p><b>Message:</b> <%= @content_block.message %></p>

data/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>BcmsContactUs</title>
+  <%= stylesheet_link_tag :all %>
+  <%= javascript_include_tag :defaults %>
+  <%= csrf_meta_tag %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/app/views/portlets/contact_form/_form.html.erb

@@ -0,0 +1,3 @@
+<%= f.cms_text_field :name %>
+<%= f.cms_text_field :success_url %>
+<%= f.cms_text_area :template, :default_value => @block.class.default_template %>

data/app/views/portlets/contact_form/render.html.erb

@@ -0,0 +1,21 @@
+<% form_for @contact, :url => cms_path(@portlet, "submit") do |f| %>
+  <%= f.error_messages %>
+
+  <%= f.label :first_name %>
+  <%= f.text_field :first_name %>
+  <%= f.label :last_name %>
+  <%= f.text_field :last_name %>
+  <%= f.label :email %>
+  <%= f.text_field :email %>
+  <%= f.label :phone_number %>
+  <%= f.text_field :phone_number %>
+  <%= f.label :title %>
+  <%= f.text_field :title %>
+  <%= f.label :message %>
+  <%= f.text_area :message%>
+  <%= f.check_box :mailing_list %>
+  <%= f.label :mailing_list, "Yes, I'd like to be added to the Turo Mailing List" %>
+  <button type="submit">
+    Send Message
+  </button>
+<% end %>

data/db/migrate/20110906200737_create_contacts.rb

@@ -0,0 +1,23 @@
+class CreateContacts < ActiveRecord::Migration
+  def self.up
+    create_content_table :contacts do |t|
+      t.string :first_name
+      t.string :last_name
+      t.string :email
+      t.string :phone_number
+      t.string :title
+      t.text :message
+      t.boolean :mailing_list
+    end
+
+    ContentType.create!(:name => "Contact", :group_name => "Contact Us")
+  end
+
+  def self.down
+    ContentType.delete_all(['name = ?', 'Contact'])
+    CategoryType.all(:conditions => ['name = ?', 'Contact']).each(&:destroy)
+    #If you aren't creating a versioned table, be sure to comment this out.
+    drop_table :contact_versions
+    drop_table :contacts
+  end
+end

data/lib/bcms_contact_us/engine.rb

@@ -0,0 +1,7 @@
+require 'browsercms'
+
+module BcmsContactUs
+  class Engine < Rails::Engine
+    include Cms::Module
+  end
+end

data/lib/bcms_contact_us/routes.rb

@@ -0,0 +1,8 @@
+module Cms::Routes
+  def routes_for_bcms_contact_us
+    resources :contacts
+    namespace(:cms) do
+      content_blocks :contacts
+    end
+  end
+end

data/lib/bcms_contact_us.rb

@@ -0,0 +1,3 @@
+require 'bcms_contact_us/engine'
+require 'bcms_contact_us/routes'
+

data/lib/generators/bcms_contact_us/install/USAGE

@@ -0,0 +1,10 @@
+Description:
+    Installs the bcms_contact_us module.
+
+Example:
+    rails generate bcms_contact_us:install
+
+    This will:
+		1. Copy any migrations from the gem into the project.
+		2. Add the routes to the config/routes.rb
+

data/lib/generators/bcms_contact_us/install/install_generator.rb

@@ -0,0 +1,8 @@
+require 'cms/module_installation'
+
+class BcmsContactUs::InstallGenerator < Cms::ModuleInstallation
+  add_migrations_directory_to_source_root __FILE__
+
+  # Add migrations to be copied, by uncommenting the following file and editing as needed.
+  copy_migration_file '20110906200737_create_contacts.rb'
+end