badline 0.2.1 → 0.4.0

data/lib/badline/vic.rb

@@ -11,14 +11,22 @@ module Badline
     include Addressable
     include IntegerHelper
 
+    # The 6569 of the breadbin C64, and the HMOS 8565 of the C64C.
+    MODELS = %i[mos6569 mos8565].freeze
+
     attr_reader :address_bus, :display, :width, :height, :vic_bank, :column,
-                :rasterline, :dirty_lines
+                :rasterline, :dirty_lines, :model, :region
 
     # Returns the byte the CPU's halted read would see, for the c-accesses
     # that run before AEC. Without it they read colour RAM.
     attr_writer :open_bus
 
     LIGHTPEN_IRQ = 0x08 # $D019 latch bit
+    COLOR_REGISTERS = 0x20..0x2e
+
+    # What the 8565 shows on the pixel before a color register write takes
+    # hold, where the 6569 shows the old color: the grey dot.
+    GREY_DOT = 0x0f
 
     # A g-access reaches the pixel output this many columns after it runs.
     GRAPHICS_DELAY = 2
@@ -28,17 +36,19 @@ module Badline
     G_IDLE = 1
     G_DISPLAY = 2
 
+    # The idle g-access in the column a mid-row bad line opens display
+    # state reads here on a 6569.
+    DMA_DELAY_IDLE_ADDRESS = 0x38ff
+
     # The $d011 mode bits a g-access still sees for a cycle after they fall:
     # BMM always, and ECM too when the access it leaves read the character
     # ROM.
     FETCH_HOLD = 0x20
     FETCH_HOLD_ROM = 0x60
 
-    # Columns carrying a per-cycle hook, so an ordinary column costs one
-    # array read instead of the dispatch.
-    HOOK_COLUMNS = Array.new(63) do |column|
-      [14, 15, 53, 54, 57, 62].include?(column)
-    end.freeze
+    # The columns carrying a hook, besides the line's last column, which
+    # starts the vertical border for the line after it.
+    HOOKS = [14, 15, 53, 54, 57].freeze
 
     # BA falls three columns ahead of each sprite's pair of s-accesses, and
     # the five-column windows step two columns apart from sprite 0 at column
@@ -46,19 +56,29 @@ module Badline
     # split: the tail columns fall on the line whose cycle 55/56 compare
     # started the fetch, the head columns on the line after it.
     SPRITE_BA_WINDOWS = Array.new(8) { |n| (54 + (2 * n))..(58 + (2 * n)) }.freeze
-    SPRITE_BA_TAIL = SPRITE_BA_WINDOWS.map { |w| w.select { |c| c < 63 } }.freeze
-    SPRITE_BA_HEAD = SPRITE_BA_WINDOWS.map { |w| w.filter_map { |c| c - 63 if c >= 63 } }.freeze
 
-    def initialize(address_bus = nil, debug: false)
+    def initialize(address_bus = nil, debug: false, model: :mos6569, region: Region::PAL)
+      raise ArgumentError, "unknown VIC-II model #{model}" unless MODELS.include?(model)
+
       addressable_at(0xd000, length: 2**10)
+      @model = model
+      @region = region
+      @lightpen_extra = model == :mos8565 ? 1 : 2
+      @grey_dots = model == :mos8565
+      @delayed_fetch = model == :mos8565
+      @dma_delay_idle = model == :mos6569
       @address_bus = address_bus || AddressBus.new
       @vic_bank = VIC::Bank.new(@address_bus)
       @debug = debug
 
-      @width = 504
-      @height = 312
-      @columns_per_line = @width / 8
+      @columns_per_line = region.cycles_per_line
+      @width = @columns_per_line * 8
+      @height = region.lines_per_frame
+      @last_column = @columns_per_line - 1
       @last_line = @height - 1
+      layout_columns
+      @blank_columns = Array.new(@columns_per_line) { |column| Region.blanked?(column, region.hblank) }.freeze
+      @blank_lines = Array.new(@height) { |line| Region.blanked?(line, region.vblank) }.freeze
       @display = Array.new(@width * @height, 0)
       @lines = Array.new(@height) { Array.new(@width, 0) }
       @dirty_lines = Array.new(@height, true)
@@ -75,9 +95,9 @@ module Badline
       @registers = VIC::Registers.new
       @register_bytes = @registers.bytes
       @display_state = VIC::DisplayState.new(@registers)
-      @sequencer = VIC::Sequencer.new(@width, @registers, @vic_bank)
+      @sequencer = VIC::Sequencer.new(@width, @registers, @vic_bank, model: @model, region: @region)
       @sequencer.render = @render
-      @sprites = VIC::Sprites.new(@registers, @vic_bank, @width)
+      @sprites = VIC::Sprites.new(@registers, @vic_bank, @width, model: @model)
       @display.fill(0)
       @lines.each { |line| line.fill(0) }
       @dirty_lines.fill(true)
@@ -108,11 +128,11 @@ module Badline
       # The g-access runs in the first half of the cycle, ahead of the bad
       # line compare, and the c-access in the second half, after it.
       draw!
-      @display_state.cycle(@rasterline, @column)
+      dma_delay_idle_access if @display_state.cycle(@rasterline, @column)
 
       fetch_character_data! if dma_active?
 
-      column_hooks if HOOK_COLUMNS[@column]
+      column_hooks if @hook_columns[@column]
 
       @column += 1
       if @column == @columns_per_line
@@ -140,7 +160,7 @@ module Badline
       when 53 then check_sprite_dma
       when 54 then check_dma_and_toggle_expansion
       when 57 then @sprites.check_display(@rasterline)
-      when 62 then @sequencer.start_vertical_border(@rasterline == @last_line ? 0 : @rasterline + 1)
+      when @last_column then @sequencer.start_vertical_border(@rasterline == @last_line ? 0 : @rasterline + 1)
       end
     end
 
@@ -151,7 +171,7 @@ module Badline
     end
 
     def peek(addr)
-      i = index(addr) % (2**6)
+      i = offset_of(addr) % (2**6)
       case i
       when 0x11 then (@registers[0x11] & 0x7f) | ((raster_counter & 0x100) >> 1)
       when 0x12 then raster_counter & 0xff
@@ -161,8 +181,11 @@ module Badline
       end.tap { |value| @sprites.bus_data(@column, value) }
     end
 
+    # The register file as stored, read without a bus access's side effects.
+    def register_file = Array.new(0x40) { |reg| @registers[reg] }
+
     def poke(addr, value)
-      reg = index(addr) % (2**6)
+      reg = offset_of(addr) % (2**6)
       @sprites.bus_data(@column, value)
       log_register_change(reg, value)
       @registers.write(reg, value)
@@ -194,9 +217,10 @@ module Badline
     end
 
     # The first trigger per frame latches the beam position into LPX/LPY and
-    # raises the LP IRQ. The latch happens one cycle after the edge, with the
-    # 6569's two extra half-pixels; a trigger on the last line is consumed
-    # without latching unless it lands on the line's first cycle.
+    # raises the LP IRQ. The latch happens one cycle after the edge, with
+    # the model's extra half-pixels, two on the 6569 and one on the 8565; a
+    # trigger on the last line is consumed without latching unless it lands
+    # on the line's first cycle.
     def trigger_lightpen
       return if @lp_triggered
 
@@ -210,7 +234,7 @@ module Badline
       return if line == @last_line && column.positive?
 
       vic_x = ((column * 8) - Sprite::X_OFFSET) % @width
-      latch_lightpen((vic_x >> 1) + 2, line)
+      latch_lightpen((vic_x >> 1) + @lightpen_extra, line)
     end
 
     # The byte the VIC fetched in the phi1 half of the cycle the CPU is
@@ -221,17 +245,9 @@ module Badline
       vic_bank.peek(phi1_address)
     end
 
-    def hblank?
-      @column < 10 || @column > 60
-    end
-
-    def vblank?
-      @rasterline < 16 || @rasterline > 299
-    end
-
-    def blanking?
-      @rasterline < 16 || @rasterline > 299 || @column < 10 || @column > 60
-    end
+    def hblank? = @blank_columns[@column]
+    def vblank? = @blank_lines[@rasterline]
+    def blanking? = @blank_lines[@rasterline] || @blank_columns[@column]
 
     def render? = @render
 
@@ -262,19 +278,30 @@ module Badline
     # Mid-line writes to the color and sprite registers are logged against
     # the cycle after the write (the CPU runs after the VIC within a machine
     # cycle, so @column already points there); each register adds its own
-    # pixel delay on top.
+    # pixel delay on top. On the 8565 a color register write that leaves
+    # the value as it was still shows its grey dot.
     def log_register_change(reg, value)
       old = @registers[reg]
-      return if old == value
+      return if old == value && !grey_dot?(reg)
 
       if (0x20..0x24).cover?(reg)
         @sequencer.colors_changed! unless reg == 0x20
         @sequencer.color_patches.log(reg, old, value, @column * 8) if @render && !blanking?
       else
-        @sprites.log_change(reg, old, value, @column * 8)
+        log_sprite_change(reg, old, value)
       end
     end
 
+    def grey_dot?(reg) = @grey_dots && COLOR_REGISTERS.cover?(reg)
+
+    # A sprite color shows its grey dot as a write of light grey on the
+    # pixel before the new color.
+    def log_sprite_change(reg, old, value)
+      beam_x = @column * 8
+      @sprites.log_change(reg, old, GREY_DOT, beam_x - 1) if grey_dot?(reg)
+      @sprites.log_change(reg, old, value, beam_x)
+    end
+
     # Bauer cycles 1-10 and 58-63 are sprite p- and s-accesses, 11-15
     # refresh, 16-55 g-accesses and 56-57 idle. @column has already
     # advanced, so it is the Bauer cycle less one.
@@ -308,11 +335,12 @@ module Badline
       graphics_address(@registers[0x11], @display_state.vmli - 1, (@display_state.vc - 1) & 0x3ff)
     end
 
-    # A $d011/$d012 write is compared in the next column. A write after
-    # column 61 is left to column 62, which compares the next line.
+    # A $d011/$d012 write is compared in the next column. A write in the
+    # line's second last column is left to its last, which compares the
+    # next line.
     def compare_raster_writes(reg)
       return unless (0x11..0x12).cover?(reg)
-      return if @column == @columns_per_line - 1
+      return if @column == @last_column
 
       check_raster_irq!
       @sequencer.compare_vertical_border(@rasterline) if reg == 0x11
@@ -355,11 +383,21 @@ module Badline
       8.times do |n|
         next unless @sprites[n].displaying?
 
-        SPRITE_BA_TAIL[n].each { |c| @sprite_ba[c] = true }
-        SPRITE_BA_HEAD[n].each { |c| @sprite_ba[c] = true }
+        @sprite_ba_tail[n].each { |c| @sprite_ba[c] = true }
+        @sprite_ba_head[n].each { |c| @sprite_ba[c] = true }
       end
     end
 
+    # Splits the sprite BA windows at the end of the line and marks the hook
+    # columns, for a line of the region's length. The marks let an ordinary
+    # column cost one array read instead of the dispatch.
+    def layout_columns
+      last = @last_column
+      @sprite_ba_tail = SPRITE_BA_WINDOWS.map { |w| w.select { |c| c <= last } }.freeze
+      @sprite_ba_head = SPRITE_BA_WINDOWS.map { |w| w.filter_map { |c| c - last - 1 if c > last } }.freeze
+      @hook_columns = Array.new(@columns_per_line) { |c| c == last || HOOKS.include?(c) }.freeze
+    end
+
     # Runs this column's g-access and draws the one from GRAPHICS_DELAY
     # columns earlier. The access reads its byte now, through the mode,
     # $d018 and bank of this cycle. A column with no g-access, or one made
@@ -400,15 +438,29 @@ module Badline
       @g_color[slot] = @g_kept_color = @color_buffer[vmli] || 1
     end
 
-    # The g-access sees a mode bit that falls a cycle late: it addresses
-    # with $d011 as this column has it, OR-ed with the held bits the column
-    # before had. When BMM changes and the access moves from RAM onto the
-    # character ROM, the low address byte still comes from the old mode
+    # On the 6569 a bad line that opens display state mid-row (DMA delay)
+    # moves the idle g-access of the column that triggers it from $3fff (or
+    # $39ff) to DMA_DELAY_IDLE_ADDRESS, unless YSCROLL is 0 (vsp-tester,
+    # colorfetchbug/main).
+    def dma_delay_idle_access
+      slot = @g_tick
+      return unless @dma_delay_idle && @g_kind[slot] == G_IDLE
+      return if @registers.yscroll.zero?
+
+      @g_data[slot] = vic_bank.peek(DMA_DELAY_IDLE_ADDRESS)
+    end
+
+    # The 6569's g-access sees a mode bit that falls a cycle late: it
+    # addresses with $d011 as this column has it, OR-ed with the held bits
+    # the column before had. When BMM changes and the access moves from RAM
+    # onto the character ROM, the low address byte still comes from the old
+    # mode. The 8565's addresses with $d011 as the column before had it
     # (VICE x64sc `vicii_fetch_graphics`).
     def fetch_graphics(vmli, counter)
       d011 = @register_bytes[0x11]
       last = @fetch_d011
       return vic_bank.peek(graphics_address(d011, vmli, counter)) if d011 == last
+      return vic_bank.peek(graphics_address(last, vmli, counter)) if @delayed_fetch
 
       from = graphics_address(last, vmli, counter)
       from_rom = vic_bank.character_rom?(from)

data/lib/badline.rb

@@ -1,11 +1,14 @@
 # frozen_string_literal: true
 
 require "badline/version"
+require "badline/options"
 require "badline/integer_helper"
+require "badline/region"
 require "badline/addressable"
 require "badline/memory"
 require "badline/color_memory"
 require "badline/rom"
+require "badline/ram_expansion"
 require "badline/address_bus"
 require "badline/instruction"
 require "badline/instruction_set"
@@ -18,6 +21,7 @@ require "badline/cycleable"
 require "badline/datasette"
 require "badline/time_of_day"
 require "badline/cia"
+require "badline/via"
 require "badline/sid"
 require "badline/debug_register"
 require "badline/interrupts"
@@ -26,6 +30,7 @@ require "badline/cpu"
 require "badline/vic"
 require "badline/keyboard_buffer"
 require "badline/computer"
+require "badline/checkpoint"
 require "badline/storage"
 require "badline/cartridge"
 require "badline/kernal_trap"

data/packaging/homebrew/badline.rb

@@ -0,0 +1,34 @@
+# frozen_string_literal: true
+
+# The native badline, built from the `rake native:pack` tarball attached to
+# each release. The release workflow copies this file into the tap with the
+# release's url and sha256 filled in.
+class Badline < Formula
+  desc "Cycle-accurate Commodore 64 emulator"
+  homepage "https://github.com/elektronaut/badline"
+  url "https://github.com/elektronaut/badline/releases/download/v0.3.0/badline-0.3.0-spinel-15f037af.tar.gz"
+  sha256 "0000000000000000000000000000000000000000000000000000000000000000"
+  license "MIT"
+
+  depends_on "sdl2"
+
+  uses_from_macos "libxcrypt"
+
+  def install
+    system "make"
+    libexec.install "badline"
+    pkgshare.install "roms"
+    (bin / "badline").write_env_script libexec / "badline",
+                                       BADLINE_ROM_PATH: "${BADLINE_ROM_PATH:-#{pkgshare}/roms}"
+  end
+
+  test do
+    assert_match "badline #{version}", shell_output("#{bin}/badline --version")
+
+    ENV["SDL_VIDEODRIVER"] = "dummy"
+    ENV["SDL_RENDER_DRIVER"] = "software"
+    ENV["SDL_AUDIODRIVER"] = "dummy"
+    system bin / "badline", "--unpaced", "--no-sound", "--frames", "10", "--screenshot", testpath / "frame.bmp"
+    assert_path_exists testpath / "frame.bmp"
+  end
+end

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: badline
 version: !ruby/object:Gem::Version
-  version: 0.2.1
+  version: 0.4.0
 platform: ruby
 authors:
 - Inge Jørgensen
@@ -23,20 +23,6 @@ dependencies:
     - - "~>"
       - !ruby/object:Gem::Version
         version: '1.1'
-- !ruby/object:Gem::Dependency
-  name: ruby-sdl2
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '0.3'
-  type: :runtime
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: '0.3'
 description: Badline is a Commodore 64 emulator written in Ruby, implementing cycle-accurate
   timing and hardware behavior. Supports PRG/P00 programs, D64/D71/D81 disk images,
   T64 archives, TAP tapes, CRT cartridges, SID tunes and host directories mounted
@@ -44,20 +30,21 @@ description: Badline is a Commodore 64 emulator written in Ruby, implementing cy
 email:
 - inge@elektronaut.no
 executables:
-- badline
-- badline-sid
+- badline-ruby
 extensions: []
 extra_rdoc_files: []
 files:
+- ".claude/hooks/session-start.sh"
+- ".claude/settings.json"
 - CHANGELOG.md
 - CLAUDE.md
 - CODE_OF_CONDUCT.md
 - CONTRIBUTING.md
 - MIT-LICENSE
 - README.md
+- SECURITY.md
 - doc/pinned-behaviour.md
-- exe/badline
-- exe/badline-sid
+- exe/badline-ruby
 - lib/badline.rb
 - lib/badline/address_bus.rb
 - lib/badline/addressable.rb
@@ -68,11 +55,12 @@ files:
 - lib/badline/audio/console.rb
 - lib/badline/audio/jukebox.rb
 - lib/badline/audio/machine_player.rb
-- lib/badline/audio/options.rb
 - lib/badline/audio/pcm_writer.rb
 - lib/badline/audio/playback.rb
 - lib/badline/audio/renderer.rb
 - lib/badline/audio/sdl_sink.rb
+- lib/badline/audio/stream.rb
+- lib/badline/audio/terminal.rb
 - lib/badline/audio/wav.rb
 - lib/badline/cartridge.rb
 - lib/badline/cartridge/action_replay.rb
@@ -88,6 +76,7 @@ files:
 - lib/badline/cartridge/fun_play.rb
 - lib/badline/cartridge/g_mod2.rb
 - lib/badline/cartridge/game_system.rb
+- lib/badline/cartridge/geo_ram.rb
 - lib/badline/cartridge/kcs_power.rb
 - lib/badline/cartridge/mach5.rb
 - lib/badline/cartridge/magic_desk.rb
@@ -101,6 +90,7 @@ files:
 - lib/badline/cartridge/super_games.rb
 - lib/badline/cartridge/westermann.rb
 - lib/badline/cartridge/zaxxon.rb
+- lib/badline/checkpoint.rb
 - lib/badline/chrout_trap.rb
 - lib/badline/cia.rb
 - lib/badline/cia/interrupt_register.rb
@@ -145,7 +135,13 @@ files:
 - lib/badline/kernal_trap.rb
 - lib/badline/kernal_trap/channel.rb
 - lib/badline/kernal_trap/drive.rb
+- lib/badline/kernal_trap/drive/block_commands.rb
+- lib/badline/kernal_trap/drive/channels.rb
+- lib/badline/kernal_trap/drive/memory.rb
+- lib/badline/kernal_trap/drive/parameters.rb
 - lib/badline/kernal_trap/drive/status.rb
+- lib/badline/kernal_trap/drive/write_file.rb
+- lib/badline/kernal_trap/drive/writes.rb
 - lib/badline/kernal_trap/file.rb
 - lib/badline/kernal_trap/load.rb
 - lib/badline/kernal_trap/routine.rb
@@ -155,6 +151,13 @@ files:
 - lib/badline/keyboard_buffer.rb
 - lib/badline/media.rb
 - lib/badline/memory.rb
+- lib/badline/options.rb
+- lib/badline/ram_expansion.rb
+- lib/badline/ram_expansion/banking.rb
+- lib/badline/ram_expansion/plus256k.rb
+- lib/badline/ram_expansion/plus60k.rb
+- lib/badline/ram_expansion/unexpanded.rb
+- lib/badline/region.rb
 - lib/badline/rom.rb
 - lib/badline/roms/README
 - lib/badline/roms/basic.rom
@@ -163,7 +166,11 @@ files:
 - lib/badline/roms/eapi/README
 - lib/badline/roms/eapi/eapi-am29f040-14
 - lib/badline/roms/kernal.rom
+- lib/badline/sdl.rb
+- lib/badline/sdl/events.rb
+- lib/badline/sdl/functions.rb
 - lib/badline/sid.rb
+- lib/badline/sid/catch_up.rb
 - lib/badline/sid/decimator.rb
 - lib/badline/sid/envelope.rb
 - lib/badline/sid/filter.rb
@@ -179,6 +186,9 @@ files:
 - lib/badline/storage/d71_image.rb
 - lib/badline/storage/d81_image.rb
 - lib/badline/storage/disk_image.rb
+- lib/badline/storage/disk_image/bam.rb
+- lib/badline/storage/disk_image/directory.rb
+- lib/badline/storage/disk_image/writing.rb
 - lib/badline/storage/host_directory.rb
 - lib/badline/storage/p00.rb
 - lib/badline/storage/sid_file.rb
@@ -188,6 +198,12 @@ files:
 - lib/badline/time_of_day.rb
 - lib/badline/traps.rb
 - lib/badline/version.rb
+- lib/badline/via.rb
+- lib/badline/via/control_lines.rb
+- lib/badline/via/interrupt_register.rb
+- lib/badline/via/shift_register.rb
+- lib/badline/via/timer1.rb
+- lib/badline/via/timer2.rb
 - lib/badline/vic.rb
 - lib/badline/vic/bank.rb
 - lib/badline/vic/border_mask.rb
@@ -204,6 +220,7 @@ files:
 - lib/badline/vic/sprite/internal_bus.rb
 - lib/badline/vic/sprite/shifter.rb
 - lib/badline/vic/sprites.rb
+- packaging/homebrew/badline.rb
 - vendor/.gitkeep
 homepage: https://github.com/elektronaut/badline
 licenses:

data/exe/badline

@@ -1,75 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-lib = File.expand_path("../lib", __dir__)
-$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
-
-require "optparse"
-
-options = { autostart: true, jit: true }
-
-parser = OptionParser.new do |opts|
-  opts.banner = <<~BANNER
-    Usage: badline [options] [media]
-
-    Media can be a .prg/.p00 program, a .d64/.d71/.d81 disk image,
-    a .t64 tape archive, a .tap tape, a .crt cartridge, a .sid tune, or
-    a directory to mount as device 8.
-
-    Options:
-  BANNER
-
-  opts.on("--no-autostart", "Boot to READY. instead of running the program") do
-    options[:autostart] = false
-  end
-
-  opts.on("--song N", Integer, "Subtune of a .sid to play (default: the tune's own)") do |n|
-    options[:song] = n
-  end
-
-  opts.on("--sid MODEL", { "6581" => :mos6581, "8580" => :mos8580 },
-          "SID to fit: 6581 or 8580 (default: a .sid tune's own, else 6581)") do |model|
-    options[:sid_model] = model
-  end
-
-  opts.on("--disable-jit", "Run without enabling YJIT") do
-    options[:jit] = false
-  end
-
-  opts.on("-h", "--help", "Show this help") do
-    puts opts
-    exit
-  end
-end
-
-begin
-  parser.parse!
-rescue OptionParser::ParseError => e
-  warn "badline: #{e.message}"
-  warn "Try 'badline --help' for more information."
-  exit 1
-end
-
-media_path = ARGV[0]
-if media_path && !File.exist?(media_path)
-  warn "badline: no such file or directory: #{media_path}"
-  exit 1
-end
-
-jit_available = defined?(RubyVM::YJIT) && !RubyVM::YJIT.enabled?
-RubyVM::YJIT.enable if options[:jit] && jit_available
-
-require "badline"
-require "badline/gui"
-
-begin
-  application = Badline::GUI::Application.new(media_path:, autostart: options[:autostart],
-                                              song: options[:song], sid_model: options[:sid_model])
-rescue Badline::Storage::SIDFile::FormatError, Badline::Storage::T64::FormatError,
-       Badline::Storage::TAP::FormatError, Badline::Storage::CRTFile::FormatError,
-       Badline::Cartridge::UnsupportedTypeError => e
-  warn "badline: #{media_path}: #{e.message}"
-  exit 1
-end
-
-application.run

data/exe/badline-sid

@@ -1,34 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-lib = File.expand_path("../lib", __dir__)
-$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
-
-require "badline/audio/options"
-
-begin
-  options = Badline::Audio::Options.parse(ARGV)
-rescue Badline::Audio::Options::Error => e
-  warn "badline-sid: #{e.message}"
-  warn "Try 'badline-sid --help' for more information."
-  exit 1
-end
-
-if options.help?
-  puts options.help
-  exit
-end
-
-jit_available = defined?(RubyVM::YJIT) && !RubyVM::YJIT.enabled?
-RubyVM::YJIT.enable if options.jit? && jit_available
-
-require "badline"
-
-begin
-  Badline::Audio::CLI.new(options).run
-rescue Badline::Audio::CLI::Error => e
-  warn "badline-sid: #{e.message}"
-  exit 1
-rescue Interrupt
-  exit 130
-end