backlog 0.0.0

data/vendor/rails/actionmailer/MIT-LICENSE

@@ -0,0 +1,21 @@
+Copyright (c) 2004-2006 David Heinemeier Hansson
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+

data/vendor/rails/actionmailer/README

@@ -0,0 +1,145 @@
+= Action Mailer -- Easy email delivery and testing
+
+Action Mailer is a framework for designing email-service layers. These layers
+are used to consolidate code for sending out forgotten passwords, welcome
+wishes on signup, invoices for billing, and any other use case that requires
+a written notification to either a person or another system.
+
+Additionally, an Action Mailer class can be used to process incoming email,
+such as allowing a weblog to accept new posts from an email (which could even
+have been sent from a phone).
+
+== Sending emails
+
+The framework works by setting up all the email details, except the body,
+in methods on the service layer. Subject, recipients, sender, and timestamp
+are all set up this way. An example of such a method:
+
+  def signed_up(recipient)
+    recipients recipient
+    subject    "[Signed up] Welcome #{recipient}"
+    from       "system@loudthinking.com"
+
+    body(:recipient => recipient)
+  end
+
+The body of the email is created by using an Action View template (regular
+ERb) that has the content of the body hash parameter available as instance variables. 
+So the corresponding body template for the method above could look like this:
+
+  Hello there, 
+
+  Mr. <%= @recipient %>
+  
+And if the recipient was given as "david@loudthinking.com", the email 
+generated would look like this:
+
+  Date: Sun, 12 Dec 2004 00:00:00 +0100
+  From: system@loudthinking.com
+  To: david@loudthinking.com
+  Subject: [Signed up] Welcome david@loudthinking.com
+
+  Hello there, 
+
+  Mr. david@loudthinking.com
+
+You never actually call the instance methods like signed_up directly. Instead,
+you call class methods like deliver_* and create_* that are automatically
+created for each instance method. So if the signed_up method sat on
+ApplicationMailer, it would look like this:
+
+  ApplicationMailer.create_signed_up("david@loudthinking.com")  # => tmail object for testing
+  ApplicationMailer.deliver_signed_up("david@loudthinking.com") # sends the email
+  ApplicationMailer.new.signed_up("david@loudthinking.com")     # won't work!
+
+== Receiving emails
+
+To receive emails, you need to implement a public instance method called receive that takes a
+tmail object as its single parameter. The Action Mailer framework has a corresponding class method, 
+which is also called receive, that accepts a raw, unprocessed email as a string, which it then turns
+into the tmail object and calls the receive instance method.
+
+Example:
+
+  class Mailman < ActionMailer::Base
+    def receive(email)
+      page = Page.find_by_address(email.to.first)
+      page.emails.create(
+        :subject => email.subject, :body => email.body
+      )
+
+      if email.has_attachments?
+        for attachment in email.attachments
+          page.attachments.create({ 
+            :file => attachment, :description => email.subject
+          })
+        end
+      end
+    end
+  end
+
+This Mailman can be the target for Postfix. In Rails, you would use the runner like this:
+
+  ./script/runner 'Mailman.receive(STDIN.read)'
+
+== Configuration
+
+The Base class has the full list of configuration options. Here's an example:
+
+ActionMailer::Base.server_settings = {
+  :address=>'smtp.yourserver.com',    # default: localhost
+  :port=>'25',                        # default: 25
+  :user_name=>'user',
+  :password=>'pass',
+  :authentication=>:plain             # :plain, :login or :cram_md5
+}
+
+== Dependencies
+
+Action Mailer requires that the Action Pack is either available to be required immediately
+or is accessible as a GEM.
+
+
+== Bundled software
+
+* tmail 0.10.8 by Minero Aoki released under LGPL
+  Read more on http://i.loveruby.net/en/prog/tmail.html
+
+* Text::Format 0.63 by Austin Ziegler released under OpenSource
+  Read more on http://www.halostatue.ca/ruby/Text__Format.html
+
+
+== Download
+
+The latest version of Action Mailer can be found at
+
+* http://rubyforge.org/project/showfiles.php?group_id=361
+
+Documentation can be found at 
+
+* http://actionmailer.rubyonrails.org
+
+
+== Installation
+
+You can install Action Mailer with the following command.
+
+  % [sudo] ruby install.rb
+
+from its distribution directory.
+
+
+== License
+
+Action Mailer is released under the MIT license.
+
+
+== Support
+
+The Action Mailer homepage is http://www.rubyonrails.org. You can find
+the Action Mailer RubyForge page at http://rubyforge.org/projects/actionmailer.
+And as Jim from Rake says:
+
+   Feel free to submit commits or feature requests.  If you send a patch,
+   remember to update the corresponding unit tests.  If fact, I prefer
+   new feature to be submitted in the form of new unit tests.

data/vendor/rails/actionmailer/Rakefile

@@ -0,0 +1,95 @@
+require 'rubygems'
+require 'rake'
+require 'rake/testtask'
+require 'rake/rdoctask'
+require 'rake/packagetask'
+require 'rake/gempackagetask'
+require 'rake/contrib/rubyforgepublisher'
+require File.join(File.dirname(__FILE__), 'lib', 'action_mailer', 'version')
+
+PKG_BUILD     = ENV['PKG_BUILD'] ? '.' + ENV['PKG_BUILD'] : ''
+PKG_NAME      = 'actionmailer'
+PKG_VERSION   = ActionMailer::VERSION::STRING + PKG_BUILD
+PKG_FILE_NAME = "#{PKG_NAME}-#{PKG_VERSION}"
+
+RELEASE_NAME  = "REL #{PKG_VERSION}"
+
+RUBY_FORGE_PROJECT = "actionmailer"
+RUBY_FORGE_USER    = "webster132"
+
+desc "Default Task"
+task :default => [ :test ]
+
+# Run the unit tests
+Rake::TestTask.new { |t|
+  t.libs << "test"
+  t.pattern = 'test/*_test.rb'
+  t.verbose = true
+  t.warning = false
+}
+
+
+# Genereate the RDoc documentation
+Rake::RDocTask.new { |rdoc|
+  rdoc.rdoc_dir = 'doc'
+  rdoc.title    = "Action Mailer -- Easy email delivery and testing"
+  rdoc.options << '--line-numbers' << '--inline-source' << '-A cattr_accessor=object'
+  rdoc.template = "#{ENV['template']}.rb" if ENV['template']
+  rdoc.rdoc_files.include('README', 'CHANGELOG')
+  rdoc.rdoc_files.include('lib/action_mailer.rb')
+  rdoc.rdoc_files.include('lib/action_mailer/*.rb')
+}
+
+
+# Create compressed packages
+spec = Gem::Specification.new do |s|
+  s.platform = Gem::Platform::RUBY
+  s.name = PKG_NAME
+  s.summary = "Service layer for easy email delivery and testing."
+  s.description = %q{Makes it trivial to test and deliver emails sent from a single service layer.}
+  s.version = PKG_VERSION
+
+  s.author = "David Heinemeier Hansson"
+  s.email = "david@loudthinking.com"
+  s.rubyforge_project = "actionmailer"
+  s.homepage = "http://www.rubyonrails.org"
+
+  s.add_dependency('actionpack', '= 1.13.3' + PKG_BUILD)
+
+  s.has_rdoc = true
+  s.requirements << 'none'
+  s.require_path = 'lib'
+  s.autorequire = 'action_mailer'
+
+  s.files = [ "Rakefile", "install.rb", "README", "CHANGELOG", "MIT-LICENSE" ]
+  s.files = s.files + Dir.glob( "lib/**/*" ).delete_if { |item| item.include?( "\.svn" ) }
+  s.files = s.files + Dir.glob( "test/**/*" ).delete_if { |item| item.include?( "\.svn" ) }
+end
+  
+Rake::GemPackageTask.new(spec) do |p|
+  p.gem_spec = spec
+  p.need_tar = true
+  p.need_zip = true
+end
+
+
+desc "Publish the API documentation"
+task :pgem => [:package] do 
+  Rake::SshFilePublisher.new("davidhh@wrath.rubyonrails.org", "public_html/gems/gems", "pkg", "#{PKG_FILE_NAME}.gem").upload
+end
+
+desc "Publish the API documentation"
+task :pdoc => [:rdoc] do 
+  Rake::SshDirPublisher.new("davidhh@wrath.rubyonrails.org", "public_html/am", "doc").upload
+end
+
+desc "Publish the release files to RubyForge."
+task :release => [ :package ] do
+  require 'rubyforge'
+
+  packages = %w( gem tgz zip ).collect{ |ext| "pkg/#{PKG_NAME}-#{PKG_VERSION}.#{ext}" }
+
+  rubyforge = RubyForge.new
+  rubyforge.login
+  rubyforge.add_release(PKG_NAME, PKG_NAME, "REL #{PKG_VERSION}", *packages)
+end

data/vendor/rails/actionmailer/install.rb

@@ -0,0 +1,30 @@
+require 'rbconfig'
+require 'find'
+require 'ftools'
+
+include Config
+
+# this was adapted from rdoc's install.rb by way of Log4r
+
+$sitedir = CONFIG["sitelibdir"]
+unless $sitedir
+  version = CONFIG["MAJOR"] + "." + CONFIG["MINOR"]
+  $libdir = File.join(CONFIG["libdir"], "ruby", version)
+  $sitedir = $:.find {|x| x =~ /site_ruby/ }
+  if !$sitedir
+    $sitedir = File.join($libdir, "site_ruby")
+  elsif $sitedir !~ Regexp.quote(version)
+    $sitedir = File.join($sitedir, version)
+  end
+end
+
+# the acual gruntwork
+Dir.chdir("lib")
+
+Find.find("action_mailer", "action_mailer.rb") { |f|
+  if f[-3..-1] == ".rb"
+    File::install(f, File.join($sitedir, *f.split(/\//)), 0644, true)
+  else
+    File::makedirs(File.join($sitedir, *f.split(/\//)))
+  end
+}

data/vendor/rails/actionmailer/lib/action_mailer.rb

@@ -0,0 +1,51 @@
+#--
+# Copyright (c) 2004-2006 David Heinemeier Hansson
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#++
+
+unless defined?(ActionController)
+  begin
+    $:.unshift "#{File.dirname(__FILE__)}/../../actionpack/lib"
+    require 'action_controller'
+  rescue LoadError
+    require 'rubygems'
+    gem 'actionpack', '>= 1.12.5'
+  end
+end
+
+$:.unshift(File.dirname(__FILE__) + "/action_mailer/vendor/")
+
+require 'action_mailer/base'
+require 'action_mailer/helpers'
+require 'action_mailer/mail_helper'
+require 'action_mailer/quoting'
+require 'action_mailer/test_helper'
+require 'tmail'
+require 'net/smtp'
+
+ActionMailer::Base.class_eval do
+  include ActionMailer::Quoting
+  include ActionMailer::Helpers
+
+  helper MailHelper
+end
+
+silence_warnings { TMail::Encoder.const_set("MAX_LINE_LEN", 200) }

data/vendor/rails/actionmailer/lib/action_mailer/adv_attr_accessor.rb

@@ -0,0 +1,30 @@
+module ActionMailer
+  module AdvAttrAccessor #:nodoc:
+    def self.included(base)
+      base.extend(ClassMethods)
+    end
+
+    module ClassMethods #:nodoc:
+      def adv_attr_accessor(*names)
+        names.each do |name|
+          ivar = "@#{name}"
+
+          define_method("#{name}=") do |value|
+            instance_variable_set(ivar, value)
+          end
+
+          define_method(name) do |*parameters|
+            raise ArgumentError, "expected 0 or 1 parameters" unless parameters.length <= 1
+            if parameters.empty?
+              if instance_variables.include?(ivar)
+                instance_variable_get(ivar)
+              end
+            else
+              instance_variable_set(ivar, parameters.first)
+            end
+          end
+        end
+      end
+    end
+  end
+end

data/vendor/rails/actionmailer/lib/action_mailer/base.rb

@@ -0,0 +1,570 @@
+require 'action_mailer/adv_attr_accessor'
+require 'action_mailer/part'
+require 'action_mailer/part_container'
+require 'action_mailer/utils'
+require 'tmail/net'
+
+module ActionMailer #:nodoc:
+  # ActionMailer allows you to send email from your application using a mailer model and views.
+  #
+  #
+  # = Mailer Models
+  #
+  # To use ActionMailer, you need to create a mailer model.
+  #   
+  #   $ script/generate mailer Notifier
+  #
+  # The generated model inherits from ActionMailer::Base. Emails are defined by creating methods within the model which are then 
+  # used to set variables to be used in the mail template, to change options on the mail, or 
+  # to add attachments.
+  #
+  # Examples:
+  #
+  #  class Notifier < ActionMailer::Base
+  #    def signup_notification(recipient)
+  #      recipients recipient.email_address_with_name
+  #      from       "system@example.com"
+  #      subject    "New account information"
+  #      body       :account => recipient
+  #    end
+  #  end
+  #
+  # Mailer methods have the following configuration methods available.
+  #
+  # * <tt>recipients</tt> - Takes one or more email addresses. These addresses are where your email will be delivered to. Sets the <tt>To:</tt> header.
+  # * <tt>subject</tt> - The subject of your email. Sets the <tt>Subject:</tt> header.
+  # * <tt>from</tt> - Who the email you are sending is from. Sets the <tt>From:</tt> header.
+  # * <tt>cc</tt> - Takes one or more email addresses. These addresses will receive a carbon copy of your email. Sets the <tt>Cc:</tt> header.
+  # * <tt>bcc</tt> - Takes one or more email address. These addresses will receive a blind carbon copy of your email. Sets the <tt>Bcc</tt> header.
+  # * <tt>sent_on</tt> - The date on which the message was sent. If not set, the header wil be set by the delivery agent.
+  # * <tt>content_type</tt> - Specify the content type of the message. Defaults to <tt>text/plain</tt>.
+  # * <tt>headers</tt> - Specify additional headers to be set for the message, e.g. <tt>headers 'X-Mail-Count' => 107370</tt>.
+  #
+  # The <tt>body</tt> method has special behavior. It takes a hash which generates an instance variable
+  # named after each key in the hash containing the value that that key points to.
+  #
+  # So, for example, <tt>body "account" => recipient</tt> would result
+  # in an instance variable <tt>@account</tt> with the value of <tt>recipient</tt> being accessible in the 
+  # view.
+  #
+  #
+  # = Mailer views
+  #
+  # Like ActionController, each mailer class has a corresponding view directory
+  # in which each method of the class looks for a template with its name.
+  # To define a template to be used with a mailing, create an <tt>.erb</tt> file with the same name as the method
+  # in your mailer model. For example, in the mailer defined above, the template at 
+  # <tt>app/views/notifier/signup_notification.erb</tt> would be used to generate the email.
+  #
+  # Variables defined in the model are accessible as instance variables in the view.
+  #
+  # Emails by default are sent in plain text, so a sample view for our model example might look like this:
+  #
+  #   Hi <%= @account.name %>,
+  #   Thanks for joining our service! Please check back often.
+  #
+  # You can even use Action Pack helpers in these views. For example:
+  #
+  #   You got a new note!
+  #   <%= truncate(note.body, 25) %>
+  # 
+  #
+  # = Generating URLs for mailer views
+  #
+  # If your view includes URLs from the application, you need to use url_for in the mailing method instead of the view.
+  # Unlike controllers from Action Pack, the mailer instance doesn't have any context about the incoming request. That's
+  # why you need to jump this little hoop and supply all the details needed for the URL. Example:
+  #
+  #    def signup_notification(recipient)
+  #      recipients recipient.email_address_with_name
+  #      from       "system@example.com"
+  #      subject    "New account information"
+  #      body       :account => recipient,
+  #                 :home_page => url_for(:host => "example.com", :controller => "welcome", :action => "greeting")
+  #    end
+  #
+  # You can now access @home_page in the template and get http://example.com/welcome/greeting.
+  #
+  # = Sending mail
+  #
+  # Once a mailer action and template are defined, you can deliver your message or create it and save it 
+  # for delivery later:
+  #
+  #   Notifier.deliver_signup_notification(david) # sends the email
+  #   mail = Notifier.create_signup_notification(david)  # => a tmail object
+  #   Notifier.deliver(mail)
+  # 
+  # You never instantiate your mailer class. Rather, your delivery instance
+  # methods are automatically wrapped in class methods that start with the word
+  # <tt>deliver_</tt> followed by the name of the mailer method that you would
+  # like to deliver. The <tt>signup_notification</tt> method defined above is
+  # delivered by invoking <tt>Notifier.deliver_signup_notification</tt>.
+  #
+  #
+  # = HTML email
+  #
+  # To send mail as HTML, make sure your view (the <tt>.erb</tt> file) generates HTML and
+  # set the content type to html.
+  #
+  #   class MyMailer < ActionMailer::Base
+  #     def signup_notification(recipient)
+  #       recipients recipient.email_address_with_name
+  #       subject    "New account information"
+  #       body       "account" => recipient
+  #       from       "system@example.com"
+  #       content_type "text/html"   #    Here's where the magic happens
+  #     end
+  #   end  
+  #
+  #
+  # = Multipart email
+  #
+  # You can explicitly specify multipart messages:
+  #
+  #   class ApplicationMailer < ActionMailer::Base
+  #     def signup_notification(recipient)
+  #       recipients      recipient.email_address_with_name
+  #       subject         "New account information"
+  #       from            "system@example.com"
+  #
+  #       part :content_type => "text/html",
+  #         :body => render_message("signup-as-html", :account => recipient)
+  #
+  #       part "text/plain" do |p|
+  #         p.body = render_message("signup-as-plain", :account => recipient)
+  #         p.transfer_encoding = "base64"
+  #       end
+  #     end
+  #   end
+  #  
+  # Multipart messages can also be used implicitly because ActionMailer will automatically
+  # detect and use multipart templates, where each template is named after the name of the action, followed
+  # by the content type. Each such detected template will be added as separate part to the message.
+  # 
+  # For example, if the following templates existed:
+  # * signup_notification.text.plain.erb
+  # * signup_notification.text.html.erb
+  # * signup_notification.text.xml.builder
+  # * signup_notification.text.x-yaml.erb
+  #  
+  # Each would be rendered and added as a separate part to the message,
+  # with the corresponding content type. The same body hash is passed to
+  # each template.
+  #
+  #
+  # = Attachments
+  #
+  # Attachments can be added by using the +attachment+ method.
+  #
+  # Example:
+  #
+  #   class ApplicationMailer < ActionMailer::Base
+  #     # attachments
+  #     def signup_notification(recipient)
+  #       recipients      recipient.email_address_with_name
+  #       subject         "New account information"
+  #       from            "system@example.com"
+  #
+  #       attachment :content_type => "image/jpeg",
+  #         :body => File.read("an-image.jpg")
+  #
+  #       attachment "application/pdf" do |a|
+  #         a.body = generate_your_pdf_here()
+  #       end
+  #     end
+  #   end 
+  #
+  #
+  # = Configuration options
+  #
+  # These options are specified on the class level, like <tt>ActionMailer::Base.template_root = "/my/templates"</tt>
+  #
+  # * <tt>template_root</tt> - template root determines the base from which template references will be made.
+  #
+  # * <tt>logger</tt> - the logger is used for generating information on the mailing run if available.
+  #   Can be set to nil for no logging. Compatible with both Ruby's own Logger and Log4r loggers.
+  #
+  # * <tt>smtp_settings</tt> -  Allows detailed configuration for :smtp delivery method:
+  #   * <tt>:address</tt> Allows you to use a remote mail server. Just change it from its default "localhost" setting.
+  #   * <tt>:port</tt> On the off chance that your mail server doesn't run on port 25, you can change it.
+  #   * <tt>:domain</tt> If you need to specify a HELO domain, you can do it here.
+  #   * <tt>:user_name</tt> If your mail server requires authentication, set the username in this setting.
+  #   * <tt>:password</tt> If your mail server requires authentication, set the password in this setting.
+  #   * <tt>:authentication</tt> If your mail server requires authentication, you need to specify the authentication type here. 
+  #     This is a symbol and one of :plain, :login, :cram_md5
+  #
+  # * <tt>sendmail_settings</tt> - Allows you to override options for the :sendmail delivery method
+  #   * <tt>:location</tt> The location of the sendmail executable, defaults to "/usr/sbin/sendmail"
+  #   * <tt>:arguments</tt> The command line arguments
+  # * <tt>raise_delivery_errors</tt> - whether or not errors should be raised if the email fails to be delivered.
+  #
+  # * <tt>delivery_method</tt> - Defines a delivery method. Possible values are :smtp (default), :sendmail, and :test.
+  #
+  # * <tt>perform_deliveries</tt> - Determines whether deliver_* methods are actually carried out. By default they are,
+  #   but this can be turned off to help functional testing.
+  #
+  # * <tt>deliveries</tt> - Keeps an array of all the emails sent out through the Action Mailer with delivery_method :test. Most useful
+  #   for unit and functional testing.
+  #
+  # * <tt>default_charset</tt> - The default charset used for the body and to encode the subject. Defaults to UTF-8. You can also 
+  #   pick a different charset from inside a method with <tt>@charset</tt>.
+  # * <tt>default_content_type</tt> - The default content type used for the main part of the message. Defaults to "text/plain". You
+  #   can also pick a different content type from inside a method with <tt>@content_type</tt>. 
+  # * <tt>default_mime_version</tt> - The default mime version used for the message. Defaults to "1.0". You
+  #   can also pick a different value from inside a method with <tt>@mime_version</tt>.
+  # * <tt>default_implicit_parts_order</tt> - When a message is built implicitly (i.e. multiple parts are assembled from templates
+  #   which specify the content type in their filenames) this variable controls how the parts are ordered. Defaults to
+  #   ["text/html", "text/enriched", "text/plain"]. Items that appear first in the array have higher priority in the mail client
+  #   and appear last in the mime encoded message. You can also pick a different order from inside a method with
+  #   <tt>@implicit_parts_order</tt>.
+  class Base
+    include AdvAttrAccessor, PartContainer
+    include ActionController::UrlWriter if Object.const_defined?(:ActionController)
+
+    # Action Mailer subclasses should be reloaded by the dispatcher in Rails
+    # when Dependencies.mechanism = :load.
+    include Reloadable::Deprecated
+    
+    private_class_method :new #:nodoc:
+
+    class_inheritable_accessor :template_root
+    cattr_accessor :logger
+
+    @@smtp_settings = { 
+      :address        => "localhost", 
+      :port           => 25, 
+      :domain         => 'localhost.localdomain', 
+      :user_name      => nil, 
+      :password       => nil, 
+      :authentication => nil
+    }
+    cattr_accessor :smtp_settings
+    
+    @@sendmail_settings = {
+      :location       => '/usr/sbin/sendmail',
+      :arguments      => '-i -t'
+    }
+    cattr_accessor :sendmail_settings
+
+    @@raise_delivery_errors = true
+    cattr_accessor :raise_delivery_errors
+
+    @@delivery_method = :smtp
+    cattr_accessor :delivery_method
+    
+    @@perform_deliveries = true
+    cattr_accessor :perform_deliveries
+    
+    @@deliveries = []
+    cattr_accessor :deliveries
+
+    @@default_charset = "utf-8"
+    cattr_accessor :default_charset
+
+    @@default_content_type = "text/plain"
+    cattr_accessor :default_content_type
+    
+    @@default_mime_version = "1.0"
+    cattr_accessor :default_mime_version
+
+    @@default_implicit_parts_order = [ "text/html", "text/enriched", "text/plain" ]
+    cattr_accessor :default_implicit_parts_order
+
+    # Specify the BCC addresses for the message
+    adv_attr_accessor :bcc
+    
+    # Define the body of the message. This is either a Hash (in which case it
+    # specifies the variables to pass to the template when it is rendered),
+    # or a string, in which case it specifies the actual text of the message.
+    adv_attr_accessor :body
+    
+    # Specify the CC addresses for the message.
+    adv_attr_accessor :cc
+    
+    # Specify the charset to use for the message. This defaults to the
+    # +default_charset+ specified for ActionMailer::Base.
+    adv_attr_accessor :charset
+    
+    # Specify the content type for the message. This defaults to <tt>text/plain</tt>
+    # in most cases, but can be automatically set in some situations.
+    adv_attr_accessor :content_type
+    
+    # Specify the from address for the message.
+    adv_attr_accessor :from
+    
+    # Specify additional headers to be added to the message.
+    adv_attr_accessor :headers
+    
+    # Specify the order in which parts should be sorted, based on content-type.
+    # This defaults to the value for the +default_implicit_parts_order+.
+    adv_attr_accessor :implicit_parts_order
+    
+    # Override the mailer name, which defaults to an inflected version of the
+    # mailer's class name. If you want to use a template in a non-standard
+    # location, you can use this to specify that location.
+    adv_attr_accessor :mailer_name
+    
+    # Defaults to "1.0", but may be explicitly given if needed.
+    adv_attr_accessor :mime_version
+    
+    # The recipient addresses for the message, either as a string (for a single
+    # address) or an array (for multiple addresses).
+    adv_attr_accessor :recipients
+    
+    # The date on which the message was sent. If not set (the default), the
+    # header will be set by the delivery agent.
+    adv_attr_accessor :sent_on
+    
+    # Specify the subject of the message.
+    adv_attr_accessor :subject
+    
+    # Specify the template name to use for current message. This is the "base"
+    # template name, without the extension or directory, and may be used to
+    # have multiple mailer methods share the same template.
+    adv_attr_accessor :template
+
+    # The mail object instance referenced by this mailer.
+    attr_reader :mail
+
+    class << self
+      def method_missing(method_symbol, *parameters)#:nodoc:
+        case method_symbol.id2name
+          when /^create_([_a-z]\w*)/  then new($1, *parameters).mail
+          when /^deliver_([_a-z]\w*)/ then new($1, *parameters).deliver!
+          when "new" then nil
+          else super
+        end
+      end
+
+      # Receives a raw email, parses it into an email object, decodes it,
+      # instantiates a new mailer, and passes the email object to the mailer
+      # object's #receive method. If you want your mailer to be able to
+      # process incoming messages, you'll need to implement a #receive
+      # method that accepts the email object as a parameter:
+      #
+      #   class MyMailer < ActionMailer::Base
+      #     def receive(mail)
+      #       ...
+      #     end
+      #   end
+      def receive(raw_email)
+        logger.info "Received mail:\n #{raw_email}" unless logger.nil?
+        mail = TMail::Mail.parse(raw_email)
+        mail.base64_decode
+        new.receive(mail)
+      end
+
+      # Deliver the given mail object directly. This can be used to deliver
+      # a preconstructed mail object, like:
+      #
+      #   email = MyMailer.create_some_mail(parameters)
+      #   email.set_some_obscure_header "frobnicate"
+      #   MyMailer.deliver(email)
+      def deliver(mail)
+        new.deliver!(mail)
+      end
+    end
+
+    # Instantiate a new mailer object. If +method_name+ is not +nil+, the mailer
+    # will be initialized according to the named method. If not, the mailer will
+    # remain uninitialized (useful when you only need to invoke the "receive"
+    # method, for instance).
+    def initialize(method_name=nil, *parameters) #:nodoc:
+      create!(method_name, *parameters) if method_name 
+    end
+
+    # Initialize the mailer via the given +method_name+. The body will be
+    # rendered and a new TMail::Mail object created.
+    def create!(method_name, *parameters) #:nodoc:
+      initialize_defaults(method_name)
+      __send__(method_name, *parameters)
+
+      # If an explicit, textual body has not been set, we check assumptions.
+      unless String === @body
+        # First, we look to see if there are any likely templates that match,
+        # which include the content-type in their file name (i.e.,
+        # "the_template_file.text.html.erb", etc.). Only do this if parts
+        # have not already been specified manually.
+        if @parts.empty?
+          templates = Dir.glob("#{template_path}/#{@template}.*")
+          templates.each do |path|
+            # TODO: don't hardcode erb|builder
+            basename = File.basename(path)
+            next unless md = /^([^\.]+)\.([^\.]+\.[^\.]+)\.(erb|builder|rhtml|rxml)$/.match(basename)
+            template_name = basename
+            content_type = md.captures[1].gsub('.', '/')
+            @parts << Part.new(:content_type => content_type,
+              :disposition => "inline", :charset => charset,
+              :body => render_message(template_name, @body))
+          end
+          unless @parts.empty?
+            @content_type = "multipart/alternative"
+            @parts = sort_parts(@parts, @implicit_parts_order)
+          end
+        end
+
+        # Then, if there were such templates, we check to see if we ought to
+        # also render a "normal" template (without the content type). If a
+        # normal template exists (or if there were no implicit parts) we render
+        # it.
+        template_exists = @parts.empty?
+        template_exists ||= Dir.glob("#{template_path}/#{@template}.*").any? { |i| File.basename(i).split(".").length == 2 }
+        @body = render_message(@template, @body) if template_exists
+
+        # Finally, if there are other message parts and a textual body exists,
+        # we shift it onto the front of the parts and set the body to nil (so
+        # that create_mail doesn't try to render it in addition to the parts).
+        if !@parts.empty? && String === @body
+          @parts.unshift Part.new(:charset => charset, :body => @body)
+          @body = nil
+        end
+      end
+
+      # If this is a multipart e-mail add the mime_version if it is not
+      # already set.
+      @mime_version ||= "1.0" if !@parts.empty?
+
+      # build the mail object itself
+      @mail = create_mail
+    end
+
+    # Delivers a TMail::Mail object. By default, it delivers the cached mail
+    # object (from the #create! method). If no cached mail object exists, and
+    # no alternate has been given as the parameter, this will fail.
+    def deliver!(mail = @mail)
+      raise "no mail object available for delivery!" unless mail
+      logger.info "Sent mail:\n #{mail.encoded}" unless logger.nil?
+
+      begin
+        __send__("perform_delivery_#{delivery_method}", mail) if perform_deliveries
+      rescue Exception => e  # Net::SMTP errors or sendmail pipe errors
+        raise e if raise_delivery_errors
+      end
+
+      return mail
+    end
+
+    private
+      # Set up the default values for the various instance variables of this
+      # mailer. Subclasses may override this method to provide different
+      # defaults.
+      def initialize_defaults(method_name)
+        @charset ||= @@default_charset.dup
+        @content_type ||= @@default_content_type.dup
+        @implicit_parts_order ||= @@default_implicit_parts_order.dup
+        @template ||= method_name
+        @mailer_name ||= Inflector.underscore(self.class.name)
+        @parts ||= []
+        @headers ||= {}
+        @body ||= {}
+        @mime_version = @@default_mime_version.dup if @@default_mime_version
+      end
+
+      def render_message(method_name, body)
+        render :file => method_name, :body => body
+      end
+
+      def render(opts)
+        body = opts.delete(:body)
+        initialize_template_class(body).render(opts)
+      end
+
+      def template_path
+        "#{template_root}/#{mailer_name}"
+      end
+
+      def initialize_template_class(assigns)
+        ActionView::Base.new(template_path, assigns, self)
+      end
+
+      def sort_parts(parts, order = [])
+        order = order.collect { |s| s.downcase }
+
+        parts = parts.sort do |a, b|
+          a_ct = a.content_type.downcase
+          b_ct = b.content_type.downcase
+
+          a_in = order.include? a_ct
+          b_in = order.include? b_ct
+
+          s = case
+          when a_in && b_in
+            order.index(a_ct) <=> order.index(b_ct)
+          when a_in
+            -1
+          when b_in
+            1
+          else
+            a_ct <=> b_ct
+          end
+
+          # reverse the ordering because parts that come last are displayed
+          # first in mail clients
+          (s * -1)
+        end
+
+        parts
+      end
+
+      def create_mail
+        m = TMail::Mail.new
+
+        m.subject, = quote_any_if_necessary(charset, subject)
+        m.to, m.from = quote_any_address_if_necessary(charset, recipients, from)
+        m.bcc = quote_address_if_necessary(bcc, charset) unless bcc.nil?
+        m.cc  = quote_address_if_necessary(cc, charset) unless cc.nil?
+
+        m.mime_version = mime_version unless mime_version.nil?
+        m.date = sent_on.to_time rescue sent_on if sent_on
+        headers.each { |k, v| m[k] = v }
+
+        real_content_type, ctype_attrs = parse_content_type
+
+        if @parts.empty?
+          m.set_content_type(real_content_type, nil, ctype_attrs)
+          m.body = Utils.normalize_new_lines(body)
+        else
+          if String === body
+            part = TMail::Mail.new
+            part.body = Utils.normalize_new_lines(body)
+            part.set_content_type(real_content_type, nil, ctype_attrs)
+            part.set_content_disposition "inline"
+            m.parts << part
+          end
+
+          @parts.each do |p|
+            part = (TMail::Mail === p ? p : p.to_mail(self))
+            m.parts << part
+          end
+          
+          if real_content_type =~ /multipart/
+            ctype_attrs.delete "charset"
+            m.set_content_type(real_content_type, nil, ctype_attrs)
+          end
+        end
+
+        @mail = m
+      end
+
+      def perform_delivery_smtp(mail)
+        destinations = mail.destinations
+        mail.ready_to_send
+
+        Net::SMTP.start(smtp_settings[:address], smtp_settings[:port], smtp_settings[:domain], 
+            smtp_settings[:user_name], smtp_settings[:password], smtp_settings[:authentication]) do |smtp|
+          smtp.sendmail(mail.encoded, mail.from, destinations)
+        end
+      end
+
+      def perform_delivery_sendmail(mail)
+        IO.popen("#{sendmail_settings[:location]} #{sendmail_settings[:arguments]}","w+") do |sm|
+          sm.print(mail.encoded.gsub(/\r/, ''))
+          sm.flush
+        end
+      end
+
+      def perform_delivery_test(mail)
+        deliveries << mail
+      end
+  end
+end