backbone-queryparams-rails 0.0.1 → 0.0.2

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/middleware/templates/rescues/missing_template.erb

@@ -1,2 +0,0 @@
-<h1>Template is missing</h1>
-<p><%=h @exception.message %></p>

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/middleware/templates/rescues/routing_error.erb

@@ -1,15 +0,0 @@
-<h1>Routing Error</h1>
-<p><pre><%=h @exception.message %></pre></p>
-<% unless @exception.failures.empty? %>
-  <p>
-    <h2>Failure reasons:</h2>
-    <ol>
-    <% @exception.failures.each do |route, reason| %>
-      <li><code><%=h route.inspect.gsub('\\', '') %></code> failed because <%=h reason.downcase %></li>
-    <% end %>
-    </ol>
-  </p>
-<% end %>
-<p>
-  Try running <code>rake routes</code> for more information on available routes.
-</p>

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/middleware/templates/rescues/template_error.erb

@@ -1,17 +0,0 @@
-<h1>
-  <%=h @exception.original_exception.class.to_s %> in
-  <%=h @request.parameters["controller"].capitalize if @request.parameters["controller"]%>#<%=h @request.parameters["action"] %>
-</h1>
-
-<p>
-  Showing <i><%=h @exception.file_name %></i> where line <b>#<%=h @exception.line_number %></b> raised:
-  <pre><code><%=h @exception.message %></code></pre>
-</p>
-
-<p>Extracted source (around line <b>#<%=h @exception.line_number %></b>):
-<pre><code><%=h @exception.source_extract %></code></pre></p>
-
-<p><%=h @exception.sub_template_message %></p>
-
-<%= render :template => "rescues/_trace" %>
-<%= render :template => "rescues/_request_and_response" %>

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/middleware/templates/rescues/unknown_action.erb

@@ -1,2 +0,0 @@
-<h1>Unknown action</h1>
-<p><%=h @exception.message %></p>

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/railtie.rb

@@ -1,34 +0,0 @@
-require "action_dispatch"
-
-module ActionDispatch
-  class Railtie < Rails::Railtie
-    config.action_dispatch = ActiveSupport::OrderedOptions.new
-    config.action_dispatch.x_sendfile_header = nil
-    config.action_dispatch.ip_spoofing_check = true
-    config.action_dispatch.show_exceptions = true
-    config.action_dispatch.best_standards_support = true
-    config.action_dispatch.tld_length = 1
-    config.action_dispatch.ignore_accept_header = false
-    config.action_dispatch.rescue_templates = { }
-    config.action_dispatch.rescue_responses = { }
-    config.action_dispatch.default_charset = nil
-
-    config.action_dispatch.rack_cache = {
-      :metastore => "rails:/",
-      :entitystore => "rails:/",
-      :verbose => false
-    }
-
-    initializer "action_dispatch.configure" do |app|
-      ActionDispatch::Http::URL.tld_length = app.config.action_dispatch.tld_length
-      ActionDispatch::Request.ignore_accept_header = app.config.action_dispatch.ignore_accept_header
-      ActionDispatch::Response.default_charset = app.config.action_dispatch.default_charset || app.config.encoding
-
-      ActionDispatch::ExceptionWrapper.rescue_responses.merge!(config.action_dispatch.rescue_responses)
-      ActionDispatch::ExceptionWrapper.rescue_templates.merge!(config.action_dispatch.rescue_templates)
-
-      config.action_dispatch.always_write_cookie = Rails.env.development? if config.action_dispatch.always_write_cookie.nil?
-      ActionDispatch::Cookies::CookieJar.always_write_cookie = config.action_dispatch.always_write_cookie
-    end
-  end
-end

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/routing.rb

@@ -1,293 +0,0 @@
-require 'active_support/core_ext/object/to_param'
-require 'active_support/core_ext/regexp'
-
-module ActionDispatch
-  # The routing module provides URL rewriting in native Ruby. It's a way to
-  # redirect incoming requests to controllers and actions. This replaces
-  # mod_rewrite rules. Best of all, Rails' \Routing works with any web server.
-  # Routes are defined in <tt>config/routes.rb</tt>.
-  #
-  # Think of creating routes as drawing a map for your requests. The map tells
-  # them where to go based on some predefined pattern:
-  #
-  #   AppName::Application.routes.draw do
-  #     Pattern 1 tells some request to go to one place
-  #     Pattern 2 tell them to go to another
-  #     ...
-  #   end
-  #
-  # The following symbols are special:
-  #
-  #   :controller maps to your controller name
-  #   :action     maps to an action with your controllers
-  #
-  # Other names simply map to a parameter as in the case of <tt>:id</tt>.
-  #
-  # == Resources
-  #
-  # Resource routing allows you to quickly declare all of the common routes
-  # for a given resourceful controller. Instead of declaring separate routes
-  # for your +index+, +show+, +new+, +edit+, +create+, +update+ and +destroy+
-  # actions, a resourceful route declares them in a single line of code:
-  #
-  #  resources :photos
-  #
-  # Sometimes, you have a resource that clients always look up without
-  # referencing an ID. A common example, /profile always shows the profile of
-  # the currently logged in user. In this case, you can use a singular resource
-  # to map /profile (rather than /profile/:id) to the show action.
-  #
-  #  resource :profile
-  #
-  # It's common to have resources that are logically children of other
-  # resources:
-  #
-  #   resources :magazines do
-  #     resources :ads
-  #   end
-  #
-  # You may wish to organize groups of controllers under a namespace. Most
-  # commonly, you might group a number of administrative controllers under
-  # an +admin+ namespace. You would place these controllers under the
-  # <tt>app/controllers/admin</tt> directory, and you can group them together
-  # in your router:
-  #
-  #   namespace "admin" do
-  #     resources :posts, :comments
-  #   end
-  #
-  # Alternately, you can add prefixes to your path without using a separate
-  # directory by using +scope+. +scope+ takes additional options which
-  # apply to all enclosed routes.
-  #
-  #   scope :path => "/cpanel", :as => 'admin' do
-  #     resources :posts, :comments
-  #   end
-  #
-  # For more, see <tt>Routing::Mapper::Resources#resources</tt>,
-  # <tt>Routing::Mapper::Scoping#namespace</tt>, and
-  # <tt>Routing::Mapper::Scoping#scope</tt>.
-  #
-  # == Named routes
-  #
-  # Routes can be named by passing an <tt>:as</tt> option,
-  # allowing for easy reference within your source as +name_of_route_url+
-  # for the full URL and +name_of_route_path+ for the URI path.
-  #
-  # Example:
-  #
-  #   # In routes.rb
-  #   match '/login' => 'accounts#login', :as => 'login'
-  #
-  #   # With render, redirect_to, tests, etc.
-  #   redirect_to login_url
-  #
-  # Arguments can be passed as well.
-  #
-  #   redirect_to show_item_path(:id => 25)
-  #
-  # Use <tt>root</tt> as a shorthand to name a route for the root path "/".
-  #
-  #   # In routes.rb
-  #   root :to => 'blogs#index'
-  #
-  #   # would recognize http://www.example.com/ as
-  #   params = { :controller => 'blogs', :action => 'index' }
-  #
-  #   # and provide these named routes
-  #   root_url   # => 'http://www.example.com/'
-  #   root_path  # => '/'
-  #
-  # Note: when using +controller+, the route is simply named after the
-  # method you call on the block parameter rather than map.
-  #
-  #   # In routes.rb
-  #   controller :blog do
-  #     match 'blog/show'     => :list
-  #     match 'blog/delete'   => :delete
-  #     match 'blog/edit/:id' => :edit
-  #   end
-  #
-  #   # provides named routes for show, delete, and edit
-  #   link_to @article.title, show_path(:id => @article.id)
-  #
-  # == Pretty URLs
-  #
-  # Routes can generate pretty URLs. For example:
-  #
-  #   match '/articles/:year/:month/:day' => 'articles#find_by_id', :constraints => {
-  #     :year       => /\d{4}/,
-  #     :month      => /\d{1,2}/,
-  #     :day        => /\d{1,2}/
-  #   }
-  #
-  # Using the route above, the URL "http://localhost:3000/articles/2005/11/06"
-  # maps to
-  #
-  #   params = {:year => '2005', :month => '11', :day => '06'}
-  #
-  # == Regular Expressions and parameters
-  # You can specify a regular expression to define a format for a parameter.
-  #
-  #   controller 'geocode' do
-  #     match 'geocode/:postalcode' => :show, :constraints => {
-  #       :postalcode => /\d{5}(-\d{4})?/
-  #     }
-  #
-  # Constraints can include the 'ignorecase' and 'extended syntax' regular
-  # expression modifiers:
-  #
-  #   controller 'geocode' do
-  #     match 'geocode/:postalcode' => :show, :constraints => {
-  #       :postalcode => /hx\d\d\s\d[a-z]{2}/i
-  #     }
-  #   end
-  #
-  #   controller 'geocode' do
-  #     match 'geocode/:postalcode' => :show, :constraints => {
-  #       :postalcode => /# Postcode format
-  #          \d{5} #Prefix
-  #          (-\d{4})? #Suffix
-  #          /x
-  #     }
-  #   end
-  #
-  # Using the multiline match modifier will raise an +ArgumentError+.
-  # Encoding regular expression modifiers are silently ignored. The
-  # match will always use the default encoding or ASCII.
-  #
-  # == Default route
-  #
-  # Consider the following route, which you will find commented out at the
-  # bottom of your generated <tt>config/routes.rb</tt>:
-  #
-  #   match ':controller(/:action(/:id))(.:format)'
-  #
-  # This route states that it expects requests to consist of a
-  # <tt>:controller</tt> followed optionally by an <tt>:action</tt> that in
-  # turn is followed optionally by an <tt>:id</tt>, which in turn is followed
-  # optionally by a <tt>:format</tt>.
-  #
-  # Suppose you get an incoming request for <tt>/blog/edit/22</tt>, you'll end
-  # up with:
-  #
-  #   params = { :controller => 'blog',
-  #              :action     => 'edit',
-  #              :id         => '22'
-  #           }
-  #
-  # By not relying on default routes, you improve the security of your
-  # application since not all controller actions, which includes actions you
-  # might add at a later time, are exposed by default.
-  #
-  # == HTTP Methods
-  #
-  # Using the <tt>:via</tt> option when specifying a route allows you to restrict it to a specific HTTP method.
-  # Possible values are <tt>:post</tt>, <tt>:get</tt>, <tt>:put</tt>, <tt>:delete</tt> and <tt>:any</tt>.
-  # If your route needs to respond to more than one method you can use an array, e.g. <tt>[ :get, :post ]</tt>.
-  # The default value is <tt>:any</tt> which means that the route will respond to any of the HTTP methods.
-  #
-  # Examples:
-  #
-  #   match 'post/:id' => 'posts#show', :via => :get
-  #   match 'post/:id' => "posts#create_comment', :via => :post
-  #
-  # Now, if you POST to <tt>/posts/:id</tt>, it will route to the <tt>create_comment</tt> action. A GET on the same
-  # URL will route to the <tt>show</tt> action.
-  #
-  # === HTTP helper methods
-  #
-  # An alternative method of specifying which HTTP method a route should respond to is to use the helper
-  # methods <tt>get</tt>, <tt>post</tt>, <tt>put</tt> and <tt>delete</tt>.
-  #
-  # Examples:
-  #
-  #   get 'post/:id' => 'posts#show'
-  #   post 'post/:id' => "posts#create_comment'
-  #
-  # This syntax is less verbose and the intention is more apparent to someone else reading your code,
-  # however if your route needs to respond to more than one HTTP method (or all methods) then using the
-  # <tt>:via</tt> option on <tt>match</tt> is preferable.
-  #
-  # == External redirects
-  #
-  # You can redirect any path to another path using the redirect helper in your router:
-  #
-  #   match "/stories" => redirect("/posts")
-  #
-  # == Routing to Rack Applications
-  #
-  # Instead of a String, like <tt>posts#index</tt>, which corresponds to the
-  # index action in the PostsController, you can specify any Rack application
-  # as the endpoint for a matcher:
-  #
-  #   match "/application.js" => Sprockets
-  #
-  # == Reloading routes
-  #
-  # You can reload routes if you feel you must:
-  #
-  #   Rails.application.reload_routes!
-  #
-  # This will clear all named routes and reload routes.rb if the file has been modified from
-  # last load. To absolutely force reloading, use <tt>reload!</tt>.
-  #
-  # == Testing Routes
-  #
-  # The two main methods for testing your routes:
-  #
-  # === +assert_routing+
-  #
-  #   def test_movie_route_properly_splits
-  #    opts = {:controller => "plugin", :action => "checkout", :id => "2"}
-  #    assert_routing "plugin/checkout/2", opts
-  #   end
-  #
-  # +assert_routing+ lets you test whether or not the route properly resolves into options.
-  #
-  # === +assert_recognizes+
-  #
-  #   def test_route_has_options
-  #    opts = {:controller => "plugin", :action => "show", :id => "12"}
-  #    assert_recognizes opts, "/plugins/show/12"
-  #   end
-  #
-  # Note the subtle difference between the two: +assert_routing+ tests that
-  # a URL fits options while +assert_recognizes+ tests that a URL
-  # breaks into parameters properly.
-  #
-  # In tests you can simply pass the URL or named route to +get+ or +post+.
-  #
-  #   def send_to_jail
-  #     get '/jail'
-  #     assert_response :success
-  #     assert_template "jail/front"
-  #   end
-  #
-  #   def goes_to_login
-  #     get login_url
-  #     #...
-  #   end
-  #
-  # == View a list of all your routes
-  #
-  #   rake routes
-  #
-  # Target specific controllers by prefixing the command with <tt>CONTROLLER=x</tt>.
-  #
-  module Routing
-    autoload :Mapper, 'action_dispatch/routing/mapper'
-    autoload :RouteSet, 'action_dispatch/routing/route_set'
-    autoload :RoutesProxy, 'action_dispatch/routing/routes_proxy'
-    autoload :UrlFor, 'action_dispatch/routing/url_for'
-    autoload :PolymorphicRoutes, 'action_dispatch/routing/polymorphic_routes'
-
-    SEPARATORS = %w( / . ? ) #:nodoc:
-    HTTP_METHODS = [:get, :head, :post, :put, :delete, :options] #:nodoc:
-
-    # A helper module to hold URL related helpers.
-    module Helpers #:nodoc:
-      include PolymorphicRoutes
-    end
-  end
-end

data/vendor/bundle/gems/actionpack-3.2.11/lib/action_dispatch/routing/mapper.rb

@@ -1,1509 +0,0 @@
-require 'active_support/core_ext/hash/except'
-require 'active_support/core_ext/object/blank'
-require 'active_support/core_ext/object/inclusion'
-require 'active_support/inflector'
-require 'action_dispatch/routing/redirection'
-
-module ActionDispatch
-  module Routing
-    class Mapper
-      class Constraints #:nodoc:
-        def self.new(app, constraints, request = Rack::Request)
-          if constraints.any?
-            super(app, constraints, request)
-          else
-            app
-          end
-        end
-
-        attr_reader :app, :constraints
-
-        def initialize(app, constraints, request)
-          @app, @constraints, @request = app, constraints, request
-        end
-
-        def matches?(env)
-          req = @request.new(env)
-
-          @constraints.each { |constraint|
-            if constraint.respond_to?(:matches?) && !constraint.matches?(req)
-              return false
-            elsif constraint.respond_to?(:call) && !constraint.call(*constraint_args(constraint, req))
-              return false
-            end
-          }
-
-          return true
-        ensure
-          req.reset_parameters
-        end
-
-        def call(env)
-          matches?(env) ? @app.call(env) : [ 404, {'X-Cascade' => 'pass'}, [] ]
-        end
-
-        private
-          def constraint_args(constraint, request)
-            constraint.arity == 1 ? [request] : [request.symbolized_path_parameters, request]
-          end
-      end
-
-      class Mapping #:nodoc:
-        IGNORE_OPTIONS = [:to, :as, :via, :on, :constraints, :defaults, :only, :except, :anchor, :shallow, :shallow_path, :shallow_prefix]
-        ANCHOR_CHARACTERS_REGEX = %r{\A(\\A|\^)|(\\Z|\\z|\$)\Z}
-        SHORTHAND_REGEX = %r{/[\w/]+$}
-        WILDCARD_PATH = %r{\*([^/\)]+)\)?$}
-
-        def initialize(set, scope, path, options)
-          @set, @scope = set, scope
-          @options = (@scope[:options] || {}).merge(options)
-          @path = normalize_path(path)
-          normalize_options!
-        end
-
-        def to_route
-          [ app, conditions, requirements, defaults, @options[:as], @options[:anchor] ]
-        end
-
-        private
-
-          def normalize_options!
-            path_without_format = @path.sub(/\(\.:format\)$/, '')
-
-            if using_match_shorthand?(path_without_format, @options)
-              to_shorthand    = @options[:to].blank?
-              @options[:to] ||= path_without_format.gsub(/\(.*\)/, "")[1..-1].sub(%r{/([^/]*)$}, '#\1')
-            end
-
-            @options.merge!(default_controller_and_action(to_shorthand))
-
-            requirements.each do |name, requirement|
-              # segment_keys.include?(k.to_s) || k == :controller
-              next unless Regexp === requirement && !constraints[name]
-
-              if requirement.source =~ ANCHOR_CHARACTERS_REGEX
-                raise ArgumentError, "Regexp anchor characters are not allowed in routing requirements: #{requirement.inspect}"
-              end
-              if requirement.multiline?
-                raise ArgumentError, "Regexp multiline option not allowed in routing requirements: #{requirement.inspect}"
-              end
-            end
-          end
-
-          # match "account/overview"
-          def using_match_shorthand?(path, options)
-            path && (options[:to] || options[:action]).nil? && path =~ SHORTHAND_REGEX
-          end
-
-          def normalize_path(path)
-            raise ArgumentError, "path is required" if path.blank?
-            path = Mapper.normalize_path(path)
-
-            if path.match(':controller')
-              raise ArgumentError, ":controller segment is not allowed within a namespace block" if @scope[:module]
-
-              # Add a default constraint for :controller path segments that matches namespaced
-              # controllers with default routes like :controller/:action/:id(.:format), e.g:
-              # GET /admin/products/show/1
-              # => { :controller => 'admin/products', :action => 'show', :id => '1' }
-              @options[:controller] ||= /.+?/
-            end
-
-            # Add a constraint for wildcard route to make it non-greedy and match the
-            # optional format part of the route by default
-            if path.match(WILDCARD_PATH) && @options[:format] != false
-              @options[$1.to_sym] ||= /.+?/
-            end
-
-            if @options[:format] == false
-              @options.delete(:format)
-              path
-            elsif path.include?(":format") || path.end_with?('/')
-              path
-            elsif @options[:format] == true
-              "#{path}.:format"
-            else
-              "#{path}(.:format)"
-            end
-          end
-
-          def app
-            Constraints.new(
-              to.respond_to?(:call) ? to : Routing::RouteSet::Dispatcher.new(:defaults => defaults),
-              blocks,
-              @set.request_class
-            )
-          end
-
-          def conditions
-            { :path_info => @path }.merge(constraints).merge(request_method_condition)
-          end
-
-          def requirements
-            @requirements ||= (@options[:constraints].is_a?(Hash) ? @options[:constraints] : {}).tap do |requirements|
-              requirements.reverse_merge!(@scope[:constraints]) if @scope[:constraints]
-              @options.each { |k, v| requirements[k] = v if v.is_a?(Regexp) }
-            end
-          end
-
-          def defaults
-            @defaults ||= (@options[:defaults] || {}).tap do |defaults|
-              defaults.reverse_merge!(@scope[:defaults]) if @scope[:defaults]
-              @options.each { |k, v| defaults[k] = v unless v.is_a?(Regexp) || IGNORE_OPTIONS.include?(k.to_sym) }
-            end
-          end
-
-          def default_controller_and_action(to_shorthand=nil)
-            if to.respond_to?(:call)
-              { }
-            else
-              if to.is_a?(String)
-                controller, action = to.split('#')
-              elsif to.is_a?(Symbol)
-                action = to.to_s
-              end
-
-              controller ||= default_controller
-              action     ||= default_action
-
-              unless controller.is_a?(Regexp) || to_shorthand
-                controller = [@scope[:module], controller].compact.join("/").presence
-              end
-
-              if controller.is_a?(String) && controller =~ %r{\A/}
-                raise ArgumentError, "controller name should not start with a slash"
-              end
-
-              controller = controller.to_s unless controller.is_a?(Regexp)
-              action     = action.to_s     unless action.is_a?(Regexp)
-
-              if controller.blank? && segment_keys.exclude?("controller")
-                raise ArgumentError, "missing :controller"
-              end
-
-              if action.blank? && segment_keys.exclude?("action")
-                raise ArgumentError, "missing :action"
-              end
-
-              hash = {}
-              hash[:controller] = controller unless controller.blank?
-              hash[:action]     = action unless action.blank?
-              hash
-            end
-          end
-
-          def blocks
-            constraints = @options[:constraints]
-            if constraints.present? && !constraints.is_a?(Hash)
-              [constraints]
-            else
-              @scope[:blocks] || []
-            end
-          end
-
-          def constraints
-            @constraints ||= requirements.reject { |k, v| segment_keys.include?(k.to_s) || k == :controller }
-          end
-
-          def request_method_condition
-            if via = @options[:via]
-              list = Array(via).map { |m| m.to_s.dasherize.upcase }
-              { :request_method => list }
-            else
-              { }
-            end
-          end
-
-          def segment_keys
-            @segment_keys ||= Journey::Path::Pattern.new(
-              Journey::Router::Strexp.compile(@path, requirements, SEPARATORS)
-            ).names
-          end
-
-          def to
-            @options[:to]
-          end
-
-          def default_controller
-            @options[:controller] || @scope[:controller]
-          end
-
-          def default_action
-            @options[:action] || @scope[:action]
-          end
-      end
-
-      # Invokes Rack::Mount::Utils.normalize path and ensure that
-      # (:locale) becomes (/:locale) instead of /(:locale). Except
-      # for root cases, where the latter is the correct one.
-      def self.normalize_path(path)
-        path = Journey::Router::Utils.normalize_path(path)
-        path.gsub!(%r{/(\(+)/?}, '\1/') unless path =~ %r{^/\(+[^)]+\)$}
-        path
-      end
-
-      def self.normalize_name(name)
-        normalize_path(name)[1..-1].gsub("/", "_")
-      end
-
-      module Base
-        # You can specify what Rails should route "/" to with the root method:
-        #
-        #   root :to => 'pages#main'
-        #
-        # For options, see +match+, as +root+ uses it internally.
-        #
-        # You should put the root route at the top of <tt>config/routes.rb</tt>,
-        # because this means it will be matched first. As this is the most popular route
-        # of most Rails applications, this is beneficial.
-        def root(options = {})
-          match '/', { :as => :root }.merge(options)
-        end
-
-        # Matches a url pattern to one or more routes. Any symbols in a pattern
-        # are interpreted as url query parameters and thus available as +params+
-        # in an action:
-        #
-        #   # sets :controller, :action and :id in params
-        #   match ':controller/:action/:id'
-        #
-        # Two of these symbols are special, +:controller+ maps to the controller
-        # and +:action+ to the controller's action. A pattern can also map
-        # wildcard segments (globs) to params:
-        #
-        #   match 'songs/*category/:title' => 'songs#show'
-        #
-        #   # 'songs/rock/classic/stairway-to-heaven' sets
-        #   #  params[:category] = 'rock/classic'
-        #   #  params[:title] = 'stairway-to-heaven'
-        #
-        # When a pattern points to an internal route, the route's +:action+ and
-        # +:controller+ should be set in options or hash shorthand. Examples:
-        #
-        #   match 'photos/:id' => 'photos#show'
-        #   match 'photos/:id', :to => 'photos#show'
-        #   match 'photos/:id', :controller => 'photos', :action => 'show'
-        #
-        # A pattern can also point to a +Rack+ endpoint i.e. anything that
-        # responds to +call+:
-        #
-        #   match 'photos/:id' => lambda {|hash| [200, {}, "Coming soon"] }
-        #   match 'photos/:id' => PhotoRackApp
-        #   # Yes, controller actions are just rack endpoints
-        #   match 'photos/:id' => PhotosController.action(:show)
-        #
-        # === Options
-        #
-        # Any options not seen here are passed on as params with the url.
-        #
-        # [:controller]
-        #   The route's controller.
-        #
-        # [:action]
-        #   The route's action.
-        #
-        # [:path]
-        #   The path prefix for the routes.
-        #
-        # [:module]
-        #   The namespace for :controller.
-        #
-        #     match 'path' => 'c#a', :module => 'sekret', :controller => 'posts'
-        #     #=> Sekret::PostsController
-        #
-        #   See <tt>Scoping#namespace</tt> for its scope equivalent.
-        #
-        # [:as]
-        #   The name used to generate routing helpers.
-        #
-        # [:via]
-        #   Allowed HTTP verb(s) for route.
-        #
-        #      match 'path' => 'c#a', :via => :get
-        #      match 'path' => 'c#a', :via => [:get, :post]
-        #
-        # [:to]
-        #   Points to a +Rack+ endpoint. Can be an object that responds to
-        #   +call+ or a string representing a controller's action.
-        #
-        #      match 'path', :to => 'controller#action'
-        #      match 'path', :to => lambda { |env| [200, {}, "Success!"] }
-        #      match 'path', :to => RackApp
-        #
-        # [:on]
-        #   Shorthand for wrapping routes in a specific RESTful context. Valid
-        #   values are +:member+, +:collection+, and +:new+. Only use within
-        #   <tt>resource(s)</tt> block. For example:
-        #
-        #      resource :bar do
-        #        match 'foo' => 'c#a', :on => :member, :via => [:get, :post]
-        #      end
-        #
-        #   Is equivalent to:
-        #
-        #      resource :bar do
-        #        member do
-        #          match 'foo' => 'c#a', :via => [:get, :post]
-        #        end
-        #      end
-        #
-        # [:constraints]
-        #   Constrains parameters with a hash of regular expressions or an
-        #   object that responds to <tt>matches?</tt>
-        #
-        #     match 'path/:id', :constraints => { :id => /[A-Z]\d{5}/ }
-        #
-        #     class Blacklist
-        #       def matches?(request) request.remote_ip == '1.2.3.4' end
-        #     end
-        #     match 'path' => 'c#a', :constraints => Blacklist.new
-        #
-        #   See <tt>Scoping#constraints</tt> for more examples with its scope
-        #   equivalent.
-        #
-        # [:defaults]
-        #   Sets defaults for parameters
-        #
-        #     # Sets params[:format] to 'jpg' by default
-        #     match 'path' => 'c#a', :defaults => { :format => 'jpg' }
-        #
-        #   See <tt>Scoping#defaults</tt> for its scope equivalent.
-        #
-        # [:anchor]
-        #   Boolean to anchor a <tt>match</tt> pattern. Default is true. When set to
-        #   false, the pattern matches any request prefixed with the given path.
-        #
-        #     # Matches any request starting with 'path'
-        #     match 'path' => 'c#a', :anchor => false
-        def match(path, options=nil)
-        end
-
-        # Mount a Rack-based application to be used within the application.
-        #
-        #   mount SomeRackApp, :at => "some_route"
-        #
-        # Alternatively:
-        #
-        #   mount(SomeRackApp => "some_route")
-        #
-        # For options, see +match+, as +mount+ uses it internally.
-        #
-        # All mounted applications come with routing helpers to access them.
-        # These are named after the class specified, so for the above example
-        # the helper is either +some_rack_app_path+ or +some_rack_app_url+.
-        # To customize this helper's name, use the +:as+ option:
-        #
-        #   mount(SomeRackApp => "some_route", :as => "exciting")
-        #
-        # This will generate the +exciting_path+ and +exciting_url+ helpers
-        # which can be used to navigate to this mounted app.
-        def mount(app, options = nil)
-          if options
-            path = options.delete(:at)
-          else
-            options = app
-            app, path = options.find { |k, v| k.respond_to?(:call) }
-            options.delete(app) if app
-          end
-
-          raise "A rack application must be specified" unless path
-
-          options[:as] ||= app_name(app)
-
-          match(path, options.merge(:to => app, :anchor => false, :format => false))
-
-          define_generate_prefix(app, options[:as])
-          self
-        end
-
-        def default_url_options=(options)
-          @set.default_url_options = options
-        end
-        alias_method :default_url_options, :default_url_options=
-
-        def with_default_scope(scope, &block)
-          scope(scope) do
-            instance_exec(&block)
-          end
-        end
-
-        private
-          def app_name(app)
-            return unless app.respond_to?(:routes)
-
-            if app.respond_to?(:railtie_name)
-              app.railtie_name
-            else
-              class_name = app.class.is_a?(Class) ? app.name : app.class.name
-              ActiveSupport::Inflector.underscore(class_name).gsub("/", "_")
-            end
-          end
-
-          def define_generate_prefix(app, name)
-            return unless app.respond_to?(:routes) && app.routes.respond_to?(:define_mounted_helper)
-
-            _route = @set.named_routes.routes[name.to_sym]
-            _routes = @set
-            app.routes.define_mounted_helper(name)
-            app.routes.class_eval do
-              define_method :_generate_prefix do |options|
-                prefix_options = options.slice(*_route.segment_keys)
-                # we must actually delete prefix segment keys to avoid passing them to next url_for
-                _route.segment_keys.each { |k| options.delete(k) }
-                prefix = _routes.url_helpers.send("#{name}_path", prefix_options)
-                prefix = '' if prefix == '/'
-                prefix
-              end
-            end
-          end
-      end
-
-      module HttpHelpers
-        # Define a route that only recognizes HTTP GET.
-        # For supported arguments, see <tt>Base#match</tt>.
-        #
-        # Example:
-        #
-        # get 'bacon', :to => 'food#bacon'
-        def get(*args, &block)
-          map_method(:get, *args, &block)
-        end
-
-        # Define a route that only recognizes HTTP POST.
-        # For supported arguments, see <tt>Base#match</tt>.
-        #
-        # Example:
-        #
-        # post 'bacon', :to => 'food#bacon'
-        def post(*args, &block)
-          map_method(:post, *args, &block)
-        end
-
-        # Define a route that only recognizes HTTP PUT.
-        # For supported arguments, see <tt>Base#match</tt>.
-        #
-        # Example:
-        #
-        # put 'bacon', :to => 'food#bacon'
-        def put(*args, &block)
-          map_method(:put, *args, &block)
-        end
-
-        # Define a route that only recognizes HTTP PUT.
-        # For supported arguments, see <tt>Base#match</tt>.
-        #
-        # Example:
-        #
-        # delete 'broccoli', :to => 'food#broccoli'
-        def delete(*args, &block)
-          map_method(:delete, *args, &block)
-        end
-
-        private
-          def map_method(method, *args, &block)
-            options = args.extract_options!
-            options[:via] = method
-            args.push(options)
-            match(*args, &block)
-            self
-          end
-      end
-
-      # You may wish to organize groups of controllers under a namespace.
-      # Most commonly, you might group a number of administrative controllers
-      # under an +admin+ namespace. You would place these controllers under
-      # the <tt>app/controllers/admin</tt> directory, and you can group them
-      # together in your router:
-      #
-      #   namespace "admin" do
-      #     resources :posts, :comments
-      #   end
-      #
-      # This will create a number of routes for each of the posts and comments
-      # controller. For <tt>Admin::PostsController</tt>, Rails will create:
-      #
-      #   GET	    /admin/posts
-      #   GET	    /admin/posts/new
-      #   POST	  /admin/posts
-      #   GET	    /admin/posts/1
-      #   GET	    /admin/posts/1/edit
-      #   PUT	    /admin/posts/1
-      #   DELETE  /admin/posts/1
-      #
-      # If you want to route /posts (without the prefix /admin) to
-      # <tt>Admin::PostsController</tt>, you could use
-      #
-      #   scope :module => "admin" do
-      #     resources :posts
-      #   end
-      #
-      # or, for a single case
-      #
-      #   resources :posts, :module => "admin"
-      #
-      # If you want to route /admin/posts to +PostsController+
-      # (without the Admin:: module prefix), you could use
-      #
-      #   scope "/admin" do
-      #     resources :posts
-      #   end
-      #
-      # or, for a single case
-      #
-      #   resources :posts, :path => "/admin/posts"
-      #
-      # In each of these cases, the named routes remain the same as if you did
-      # not use scope. In the last case, the following paths map to
-      # +PostsController+:
-      #
-      #   GET	    /admin/posts
-      #   GET	    /admin/posts/new
-      #   POST	  /admin/posts
-      #   GET	    /admin/posts/1
-      #   GET	    /admin/posts/1/edit
-      #   PUT	    /admin/posts/1
-      #   DELETE  /admin/posts/1
-      module Scoping
-        # Scopes a set of routes to the given default options.
-        #
-        # Take the following route definition as an example:
-        #
-        #   scope :path => ":account_id", :as => "account" do
-        #     resources :projects
-        #   end
-        #
-        # This generates helpers such as +account_projects_path+, just like +resources+ does.
-        # The difference here being that the routes generated are like /:account_id/projects,
-        # rather than /accounts/:account_id/projects.
-        #
-        # === Options
-        #
-        # Takes same options as <tt>Base#match</tt> and <tt>Resources#resources</tt>.
-        #
-        # === Examples
-        #
-        #   # route /posts (without the prefix /admin) to <tt>Admin::PostsController</tt>
-        #   scope :module => "admin" do
-        #     resources :posts
-        #   end
-        #
-        #   # prefix the posts resource's requests with '/admin'
-        #   scope :path => "/admin" do
-        #     resources :posts
-        #   end
-        #
-        #   # prefix the routing helper name: +sekret_posts_path+ instead of +posts_path+
-        #   scope :as => "sekret" do
-        #     resources :posts
-        #   end
-        def scope(*args)
-          options = args.extract_options!
-          options = options.dup
-
-          options[:path] = args.first if args.first.is_a?(String)
-          recover = {}
-
-          options[:constraints] ||= {}
-          unless options[:constraints].is_a?(Hash)
-            block, options[:constraints] = options[:constraints], {}
-          end
-
-          scope_options.each do |option|
-            if value = options.delete(option)
-              recover[option] = @scope[option]
-              @scope[option]  = send("merge_#{option}_scope", @scope[option], value)
-            end
-          end
-
-          recover[:block] = @scope[:blocks]
-          @scope[:blocks] = merge_blocks_scope(@scope[:blocks], block)
-
-          recover[:options] = @scope[:options]
-          @scope[:options]  = merge_options_scope(@scope[:options], options)
-
-          yield
-          self
-        ensure
-          scope_options.each do |option|
-            @scope[option] = recover[option] if recover.has_key?(option)
-          end
-
-          @scope[:options] = recover[:options]
-          @scope[:blocks]  = recover[:block]
-        end
-
-        # Scopes routes to a specific controller
-        #
-        # Example:
-        #   controller "food" do
-        #     match "bacon", :action => "bacon"
-        #   end
-        def controller(controller, options={})
-          options[:controller] = controller
-          scope(options) { yield }
-        end
-
-        # Scopes routes to a specific namespace. For example:
-        #
-        #   namespace :admin do
-        #     resources :posts
-        #   end
-        #
-        # This generates the following routes:
-        #
-        #       admin_posts GET    /admin/posts(.:format)          admin/posts#index
-        #       admin_posts POST   /admin/posts(.:format)          admin/posts#create
-        #    new_admin_post GET    /admin/posts/new(.:format)      admin/posts#new
-        #   edit_admin_post GET    /admin/posts/:id/edit(.:format) admin/posts#edit
-        #        admin_post GET    /admin/posts/:id(.:format)      admin/posts#show
-        #        admin_post PUT    /admin/posts/:id(.:format)      admin/posts#update
-        #        admin_post DELETE /admin/posts/:id(.:format)      admin/posts#destroy
-        #
-        # === Options
-        #
-        # The +:path+, +:as+, +:module+, +:shallow_path+ and +:shallow_prefix+
-        # options all default to the name of the namespace.
-        #
-        # For options, see <tt>Base#match</tt>. For +:shallow_path+ option, see
-        # <tt>Resources#resources</tt>.
-        #
-        # === Examples
-        #
-        #   # accessible through /sekret/posts rather than /admin/posts
-        #   namespace :admin, :path => "sekret" do
-        #     resources :posts
-        #   end
-        #
-        #   # maps to <tt>Sekret::PostsController</tt> rather than <tt>Admin::PostsController</tt>
-        #   namespace :admin, :module => "sekret" do
-        #     resources :posts
-        #   end
-        #
-        #   # generates +sekret_posts_path+ rather than +admin_posts_path+
-        #   namespace :admin, :as => "sekret" do
-        #     resources :posts
-        #   end
-        def namespace(path, options = {})
-          path = path.to_s
-          options = { :path => path, :as => path, :module => path,
-                      :shallow_path => path, :shallow_prefix => path }.merge!(options)
-          scope(options) { yield }
-        end
-
-        # === Parameter Restriction
-        # Allows you to constrain the nested routes based on a set of rules.
-        # For instance, in order to change the routes to allow for a dot character in the +id+ parameter:
-        #
-        #   constraints(:id => /\d+\.\d+/) do
-        #     resources :posts
-        #   end
-        #
-        # Now routes such as +/posts/1+ will no longer be valid, but +/posts/1.1+ will be.
-        # The +id+ parameter must match the constraint passed in for this example.
-        #
-        # You may use this to also restrict other parameters:
-        #
-        #   resources :posts do
-        #     constraints(:post_id => /\d+\.\d+/) do
-        #       resources :comments
-        #     end
-        #   end
-        #
-        # === Restricting based on IP
-        #
-        # Routes can also be constrained to an IP or a certain range of IP addresses:
-        #
-        #   constraints(:ip => /192.168.\d+.\d+/) do
-        #     resources :posts
-        #   end
-        #
-        # Any user connecting from the 192.168.* range will be able to see this resource,
-        # where as any user connecting outside of this range will be told there is no such route.
-        #
-        # === Dynamic request matching
-        #
-        # Requests to routes can be constrained based on specific criteria:
-        #
-        #    constraints(lambda { |req| req.env["HTTP_USER_AGENT"] =~ /iPhone/ }) do
-        #      resources :iphones
-        #    end
-        #
-        # You are able to move this logic out into a class if it is too complex for routes.
-        # This class must have a +matches?+ method defined on it which either returns +true+
-        # if the user should be given access to that route, or +false+ if the user should not.
-        #
-        #    class Iphone
-        #      def self.matches?(request)
-        #        request.env["HTTP_USER_AGENT"] =~ /iPhone/
-        #      end
-        #    end
-        #
-        # An expected place for this code would be +lib/constraints+.
-        #
-        # This class is then used like this:
-        #
-        #    constraints(Iphone) do
-        #      resources :iphones
-        #    end
-        def constraints(constraints = {})
-          scope(:constraints => constraints) { yield }
-        end
-
-        # Allows you to set default parameters for a route, such as this:
-        #   defaults :id => 'home' do
-        #     match 'scoped_pages/(:id)', :to => 'pages#show'
-        #   end
-        # Using this, the +:id+ parameter here will default to 'home'.
-        def defaults(defaults = {})
-          scope(:defaults => defaults) { yield }
-        end
-
-        private
-          def scope_options #:nodoc:
-            @scope_options ||= private_methods.grep(/^merge_(.+)_scope$/) { $1.to_sym }
-          end
-
-          def merge_path_scope(parent, child) #:nodoc:
-            Mapper.normalize_path("#{parent}/#{child}")
-          end
-
-          def merge_shallow_path_scope(parent, child) #:nodoc:
-            Mapper.normalize_path("#{parent}/#{child}")
-          end
-
-          def merge_as_scope(parent, child) #:nodoc:
-            parent ? "#{parent}_#{child}" : child
-          end
-
-          def merge_shallow_prefix_scope(parent, child) #:nodoc:
-            parent ? "#{parent}_#{child}" : child
-          end
-
-          def merge_module_scope(parent, child) #:nodoc:
-            parent ? "#{parent}/#{child}" : child
-          end
-
-          def merge_controller_scope(parent, child) #:nodoc:
-            child
-          end
-
-          def merge_path_names_scope(parent, child) #:nodoc:
-            merge_options_scope(parent, child)
-          end
-
-          def merge_constraints_scope(parent, child) #:nodoc:
-            merge_options_scope(parent, child)
-          end
-
-          def merge_defaults_scope(parent, child) #:nodoc:
-            merge_options_scope(parent, child)
-          end
-
-          def merge_blocks_scope(parent, child) #:nodoc:
-            merged = parent ? parent.dup : []
-            merged << child if child
-            merged
-          end
-
-          def merge_options_scope(parent, child) #:nodoc:
-            (parent || {}).except(*override_keys(child)).merge(child)
-          end
-
-          def merge_shallow_scope(parent, child) #:nodoc:
-            child ? true : false
-          end
-
-          def override_keys(child) #:nodoc:
-            child.key?(:only) || child.key?(:except) ? [:only, :except] : []
-          end
-      end
-
-      # Resource routing allows you to quickly declare all of the common routes
-      # for a given resourceful controller. Instead of declaring separate routes
-      # for your +index+, +show+, +new+, +edit+, +create+, +update+ and +destroy+
-      # actions, a resourceful route declares them in a single line of code:
-      #
-      #  resources :photos
-      #
-      # Sometimes, you have a resource that clients always look up without
-      # referencing an ID. A common example, /profile always shows the profile of
-      # the currently logged in user. In this case, you can use a singular resource
-      # to map /profile (rather than /profile/:id) to the show action.
-      #
-      #  resource :profile
-      #
-      # It's common to have resources that are logically children of other
-      # resources:
-      #
-      #   resources :magazines do
-      #     resources :ads
-      #   end
-      #
-      # You may wish to organize groups of controllers under a namespace. Most
-      # commonly, you might group a number of administrative controllers under
-      # an +admin+ namespace. You would place these controllers under the
-      # <tt>app/controllers/admin</tt> directory, and you can group them together
-      # in your router:
-      #
-      #   namespace "admin" do
-      #     resources :posts, :comments
-      #   end
-      #
-      # By default the +:id+ parameter doesn't accept dots. If you need to
-      # use dots as part of the +:id+ parameter add a constraint which
-      # overrides this restriction, e.g:
-      #
-      #   resources :articles, :id => /[^\/]+/
-      #
-      # This allows any character other than a slash as part of your +:id+.
-      #
-      module Resources
-        # CANONICAL_ACTIONS holds all actions that does not need a prefix or
-        # a path appended since they fit properly in their scope level.
-        VALID_ON_OPTIONS  = [:new, :collection, :member]
-        RESOURCE_OPTIONS  = [:as, :controller, :path, :only, :except]
-        CANONICAL_ACTIONS = %w(index create new show update destroy)
-
-        class Resource #:nodoc:
-          attr_reader :controller, :path, :options
-
-          def initialize(entities, options = {})
-            @name       = entities.to_s
-            @path       = (options[:path] || @name).to_s
-            @controller = (options[:controller] || @name).to_s
-            @as         = options[:as]
-            @options    = options
-          end
-
-          def default_actions
-            [:index, :create, :new, :show, :update, :destroy, :edit]
-          end
-
-          def actions
-            if only = @options[:only]
-              Array(only).map(&:to_sym)
-            elsif except = @options[:except]
-              default_actions - Array(except).map(&:to_sym)
-            else
-              default_actions
-            end
-          end
-
-          def name
-            @as || @name
-          end
-
-          def plural
-            @plural ||= name.to_s
-          end
-
-          def singular
-            @singular ||= name.to_s.singularize
-          end
-
-          alias :member_name :singular
-
-          # Checks for uncountable plurals, and appends "_index" if the plural
-          # and singular form are the same.
-          def collection_name
-            singular == plural ? "#{plural}_index" : plural
-          end
-
-          def resource_scope
-            { :controller => controller }
-          end
-
-          alias :collection_scope :path
-
-          def member_scope
-            "#{path}/:id"
-          end
-
-          def new_scope(new_path)
-            "#{path}/#{new_path}"
-          end
-
-          def nested_scope
-            "#{path}/:#{singular}_id"
-          end
-
-        end
-
-        class SingletonResource < Resource #:nodoc:
-          def initialize(entities, options)
-            super
-            @as         = nil
-            @controller = (options[:controller] || plural).to_s
-            @as         = options[:as]
-          end
-
-          def default_actions
-            [:show, :create, :update, :destroy, :new, :edit]
-          end
-
-          def plural
-            @plural ||= name.to_s.pluralize
-          end
-
-          def singular
-            @singular ||= name.to_s
-          end
-
-          alias :member_name :singular
-          alias :collection_name :singular
-
-          alias :member_scope :path
-          alias :nested_scope :path
-        end
-
-        def resources_path_names(options)
-          @scope[:path_names].merge!(options)
-        end
-
-        # Sometimes, you have a resource that clients always look up without
-        # referencing an ID. A common example, /profile always shows the
-        # profile of the currently logged in user. In this case, you can use
-        # a singular resource to map /profile (rather than /profile/:id) to
-        # the show action:
-        #
-        #   resource :geocoder
-        #
-        # creates six different routes in your application, all mapping to
-        # the +GeoCoders+ controller (note that the controller is named after
-        # the plural):
-        #
-        #   GET     /geocoder/new
-        #   POST    /geocoder
-        #   GET     /geocoder
-        #   GET     /geocoder/edit
-        #   PUT     /geocoder
-        #   DELETE  /geocoder
-        #
-        # === Options
-        # Takes same options as +resources+.
-        def resource(*resources, &block)
-          options = resources.extract_options!.dup
-
-          if apply_common_behavior_for(:resource, resources, options, &block)
-            return self
-          end
-
-          resource_scope(:resource, SingletonResource.new(resources.pop, options)) do
-            yield if block_given?
-
-            collection do
-              post :create
-            end if parent_resource.actions.include?(:create)
-
-            new do
-              get :new
-            end if parent_resource.actions.include?(:new)
-
-            member do
-              get    :edit if parent_resource.actions.include?(:edit)
-              get    :show if parent_resource.actions.include?(:show)
-              put    :update if parent_resource.actions.include?(:update)
-              delete :destroy if parent_resource.actions.include?(:destroy)
-            end
-          end
-
-          self
-        end
-
-        # In Rails, a resourceful route provides a mapping between HTTP verbs
-        # and URLs and controller actions. By convention, each action also maps
-        # to particular CRUD operations in a database. A single entry in the
-        # routing file, such as
-        #
-        #   resources :photos
-        #
-        # creates seven different routes in your application, all mapping to
-        # the +Photos+ controller:
-        #
-        #   GET     /photos
-        #   GET     /photos/new
-        #   POST    /photos
-        #   GET     /photos/:id
-        #   GET     /photos/:id/edit
-        #   PUT     /photos/:id
-        #   DELETE  /photos/:id
-        #
-        # Resources can also be nested infinitely by using this block syntax:
-        #
-        #   resources :photos do
-        #     resources :comments
-        #   end
-        #
-        # This generates the following comments routes:
-        #
-        #   GET     /photos/:photo_id/comments
-        #   GET     /photos/:photo_id/comments/new
-        #   POST    /photos/:photo_id/comments
-        #   GET     /photos/:photo_id/comments/:id
-        #   GET     /photos/:photo_id/comments/:id/edit
-        #   PUT     /photos/:photo_id/comments/:id
-        #   DELETE  /photos/:photo_id/comments/:id
-        #
-        # === Options
-        # Takes same options as <tt>Base#match</tt> as well as:
-        #
-        # [:path_names]
-        #   Allows you to change the segment component of the +edit+ and +new+ actions.
-        #   Actions not specified are not changed.
-        #
-        #     resources :posts, :path_names => { :new => "brand_new" }
-        #
-        #   The above example will now change /posts/new to /posts/brand_new
-        #
-        # [:path]
-        #   Allows you to change the path prefix for the resource.
-        #
-        #     resources :posts, :path => 'postings'
-        #
-        #   The resource and all segments will now route to /postings instead of /posts
-        #
-        # [:only]
-        #   Only generate routes for the given actions.
-        #
-        #     resources :cows, :only => :show
-        #     resources :cows, :only => [:show, :index]
-        #
-        # [:except]
-        #   Generate all routes except for the given actions.
-        #
-        #     resources :cows, :except => :show
-        #     resources :cows, :except => [:show, :index]
-        #
-        # [:shallow]
-        #   Generates shallow routes for nested resource(s). When placed on a parent resource,
-        #   generates shallow routes for all nested resources.
-        #
-        #     resources :posts, :shallow => true do
-        #       resources :comments
-        #     end
-        #
-        #   Is the same as:
-        #
-        #     resources :posts do
-        #       resources :comments, :except => [:show, :edit, :update, :destroy]
-        #     end
-        #     resources :comments, :only => [:show, :edit, :update, :destroy]
-        #
-        #   This allows URLs for resources that otherwise would be deeply nested such
-        #   as a comment on a blog post like <tt>/posts/a-long-permalink/comments/1234</tt>
-        #   to be shortened to just <tt>/comments/1234</tt>.
-        #
-        # [:shallow_path]
-        #   Prefixes nested shallow routes with the specified path.
-        #
-        #     scope :shallow_path => "sekret" do
-        #       resources :posts do
-        #         resources :comments, :shallow => true
-        #       end
-        #     end
-        #
-        #   The +comments+ resource here will have the following routes generated for it:
-        #
-        #     post_comments    GET    /posts/:post_id/comments(.:format)
-        #     post_comments    POST   /posts/:post_id/comments(.:format)
-        #     new_post_comment GET    /posts/:post_id/comments/new(.:format)
-        #     edit_comment     GET    /sekret/comments/:id/edit(.:format)
-        #     comment          GET    /sekret/comments/:id(.:format)
-        #     comment          PUT    /sekret/comments/:id(.:format)
-        #     comment          DELETE /sekret/comments/:id(.:format)
-        #
-        # === Examples
-        #
-        #   # routes call <tt>Admin::PostsController</tt>
-        #   resources :posts, :module => "admin"
-        #
-        #   # resource actions are at /admin/posts.
-        #   resources :posts, :path => "admin/posts"
-        def resources(*resources, &block)
-          options = resources.extract_options!.dup
-
-          if apply_common_behavior_for(:resources, resources, options, &block)
-            return self
-          end
-
-          resource_scope(:resources, Resource.new(resources.pop, options)) do
-            yield if block_given?
-
-            collection do
-              get  :index if parent_resource.actions.include?(:index)
-              post :create if parent_resource.actions.include?(:create)
-            end
-
-            new do
-              get :new
-            end if parent_resource.actions.include?(:new)
-
-            member do
-              get    :edit if parent_resource.actions.include?(:edit)
-              get    :show if parent_resource.actions.include?(:show)
-              put    :update if parent_resource.actions.include?(:update)
-              delete :destroy if parent_resource.actions.include?(:destroy)
-            end
-          end
-
-          self
-        end
-
-        # To add a route to the collection:
-        #
-        #   resources :photos do
-        #     collection do
-        #       get 'search'
-        #     end
-        #   end
-        #
-        # This will enable Rails to recognize paths such as <tt>/photos/search</tt>
-        # with GET, and route to the search action of +PhotosController+. It will also
-        # create the <tt>search_photos_url</tt> and <tt>search_photos_path</tt>
-        # route helpers.
-        def collection
-          unless resource_scope?
-            raise ArgumentError, "can't use collection outside resource(s) scope"
-          end
-
-          with_scope_level(:collection) do
-            scope(parent_resource.collection_scope) do
-              yield
-            end
-          end
-        end
-
-        # To add a member route, add a member block into the resource block:
-        #
-        #   resources :photos do
-        #     member do
-        #       get 'preview'
-        #     end
-        #   end
-        #
-        # This will recognize <tt>/photos/1/preview</tt> with GET, and route to the
-        # preview action of +PhotosController+. It will also create the
-        # <tt>preview_photo_url</tt> and <tt>preview_photo_path</tt> helpers.
-        def member
-          unless resource_scope?
-            raise ArgumentError, "can't use member outside resource(s) scope"
-          end
-
-          with_scope_level(:member) do
-            scope(parent_resource.member_scope) do
-              yield
-            end
-          end
-        end
-
-        def new
-          unless resource_scope?
-            raise ArgumentError, "can't use new outside resource(s) scope"
-          end
-
-          with_scope_level(:new) do
-            scope(parent_resource.new_scope(action_path(:new))) do
-              yield
-            end
-          end
-        end
-
-        def nested
-          unless resource_scope?
-            raise ArgumentError, "can't use nested outside resource(s) scope"
-          end
-
-          with_scope_level(:nested) do
-            if shallow?
-              with_exclusive_scope do
-                if @scope[:shallow_path].blank?
-                  scope(parent_resource.nested_scope, nested_options) { yield }
-                else
-                  scope(@scope[:shallow_path], :as => @scope[:shallow_prefix]) do
-                    scope(parent_resource.nested_scope, nested_options) { yield }
-                  end
-                end
-              end
-            else
-              scope(parent_resource.nested_scope, nested_options) { yield }
-            end
-          end
-        end
-
-        # See ActionDispatch::Routing::Mapper::Scoping#namespace
-        def namespace(path, options = {})
-          if resource_scope?
-            nested { super }
-          else
-            super
-          end
-        end
-
-        def shallow
-          scope(:shallow => true, :shallow_path => @scope[:path]) do
-            yield
-          end
-        end
-
-        def shallow?
-          parent_resource.instance_of?(Resource) && @scope[:shallow]
-        end
-
-        def match(path, *rest)
-          if rest.empty? && Hash === path
-            options  = path
-            path, to = options.find { |name, value| name.is_a?(String) }
-            options[:to] = to
-            options.delete(path)
-            paths = [path]
-          else
-            options = rest.pop || {}
-            paths = [path] + rest
-          end
-
-          options[:anchor] = true unless options.key?(:anchor)
-
-          if options[:on] && !VALID_ON_OPTIONS.include?(options[:on])
-            raise ArgumentError, "Unknown scope #{on.inspect} given to :on"
-          end
-
-          paths.each { |_path| decomposed_match(_path, options.dup) }
-          self
-        end
-
-        def decomposed_match(path, options) # :nodoc:
-          if on = options.delete(:on)
-            send(on) { decomposed_match(path, options) }
-          else
-            case @scope[:scope_level]
-            when :resources
-              nested { decomposed_match(path, options) }
-            when :resource
-              member { decomposed_match(path, options) }
-            else
-              add_route(path, options)
-            end
-          end
-        end
-
-        def add_route(action, options) # :nodoc:
-          path = path_for_action(action, options.delete(:path))
-
-          if action.to_s =~ /^[\w\/]+$/
-            options[:action] ||= action unless action.to_s.include?("/")
-          else
-            action = nil
-          end
-
-          if !options.fetch(:as, true)
-            options.delete(:as)
-          else
-            options[:as] = name_for_action(options[:as], action)
-          end
-
-          mapping = Mapping.new(@set, @scope, path, options)
-          app, conditions, requirements, defaults, as, anchor = mapping.to_route
-          @set.add_route(app, conditions, requirements, defaults, as, anchor)
-        end
-
-        def root(options={})
-          if @scope[:scope_level] == :resources
-            with_scope_level(:root) do
-              scope(parent_resource.path) do
-                super(options)
-              end
-            end
-          else
-            super(options)
-          end
-        end
-
-        protected
-
-          def parent_resource #:nodoc:
-            @scope[:scope_level_resource]
-          end
-
-          def apply_common_behavior_for(method, resources, options, &block) #:nodoc:
-            if resources.length > 1
-              resources.each { |r| send(method, r, options, &block) }
-              return true
-            end
-
-            if resource_scope?
-              nested { send(method, resources.pop, options, &block) }
-              return true
-            end
-
-            options.keys.each do |k|
-              (options[:constraints] ||= {})[k] = options.delete(k) if options[k].is_a?(Regexp)
-            end
-
-            scope_options = options.slice!(*RESOURCE_OPTIONS)
-            unless scope_options.empty?
-              scope(scope_options) do
-                send(method, resources.pop, options, &block)
-              end
-              return true
-            end
-
-            unless action_options?(options)
-              options.merge!(scope_action_options) if scope_action_options?
-            end
-
-            false
-          end
-
-          def action_options?(options) #:nodoc:
-            options[:only] || options[:except]
-          end
-
-          def scope_action_options? #:nodoc:
-            @scope[:options] && (@scope[:options][:only] || @scope[:options][:except])
-          end
-
-          def scope_action_options #:nodoc:
-            @scope[:options].slice(:only, :except)
-          end
-
-          def resource_scope? #:nodoc:
-            [:resource, :resources].include? @scope[:scope_level]
-          end
-
-          def resource_method_scope? #:nodoc:
-            [:collection, :member, :new].include? @scope[:scope_level]
-          end
-
-          def with_exclusive_scope
-            begin
-              old_name_prefix, old_path = @scope[:as], @scope[:path]
-              @scope[:as], @scope[:path] = nil, nil
-
-              with_scope_level(:exclusive) do
-                yield
-              end
-            ensure
-              @scope[:as], @scope[:path] = old_name_prefix, old_path
-            end
-          end
-
-          def with_scope_level(kind, resource = parent_resource)
-            old, @scope[:scope_level] = @scope[:scope_level], kind
-            old_resource, @scope[:scope_level_resource] = @scope[:scope_level_resource], resource
-            yield
-          ensure
-            @scope[:scope_level] = old
-            @scope[:scope_level_resource] = old_resource
-          end
-
-          def resource_scope(kind, resource) #:nodoc:
-            with_scope_level(kind, resource) do
-              scope(parent_resource.resource_scope) do
-                yield
-              end
-            end
-          end
-
-          def nested_options #:nodoc:
-            options = { :as => parent_resource.member_name }
-            options[:constraints] = {
-              :"#{parent_resource.singular}_id" => id_constraint
-            } if id_constraint?
-
-            options
-          end
-
-          def id_constraint? #:nodoc:
-            @scope[:constraints] && @scope[:constraints][:id].is_a?(Regexp)
-          end
-
-          def id_constraint #:nodoc:
-            @scope[:constraints][:id]
-          end
-
-          def canonical_action?(action, flag) #:nodoc:
-            flag && resource_method_scope? && CANONICAL_ACTIONS.include?(action.to_s)
-          end
-
-          def shallow_scoping? #:nodoc:
-            shallow? && @scope[:scope_level] == :member
-          end
-
-          def path_for_action(action, path) #:nodoc:
-            prefix = shallow_scoping? ?
-              "#{@scope[:shallow_path]}/#{parent_resource.path}/:id" : @scope[:path]
-
-            path = if canonical_action?(action, path.blank?)
-              prefix.to_s
-            else
-              "#{prefix}/#{action_path(action, path)}"
-            end
-          end
-
-          def action_path(name, path = nil) #:nodoc:
-            # Ruby 1.8 can't transform empty strings to symbols
-            name = name.to_sym if name.is_a?(String) && !name.empty?
-            path || @scope[:path_names][name] || name.to_s
-          end
-
-          def prefix_name_for_action(as, action) #:nodoc:
-            if as
-              as.to_s
-            elsif !canonical_action?(action, @scope[:scope_level])
-              action.to_s
-            end
-          end
-
-          def name_for_action(as, action) #:nodoc:
-            prefix = prefix_name_for_action(as, action)
-            prefix = Mapper.normalize_name(prefix) if prefix
-            name_prefix = @scope[:as]
-
-            if parent_resource
-              return nil unless as || action
-
-              collection_name = parent_resource.collection_name
-              member_name = parent_resource.member_name
-            end
-
-            name = case @scope[:scope_level]
-            when :nested
-              [name_prefix, prefix]
-            when :collection
-              [prefix, name_prefix, collection_name]
-            when :new
-              [prefix, :new, name_prefix, member_name]
-            when :member
-              [prefix, shallow_scoping? ? @scope[:shallow_prefix] : name_prefix, member_name]
-            when :root
-              [name_prefix, collection_name, prefix]
-            else
-              [name_prefix, member_name, prefix]
-            end
-
-            if candidate = name.select(&:present?).join("_").presence
-              # If a name was not explicitly given, we check if it is valid
-              # and return nil in case it isn't. Otherwise, we pass the invalid name
-              # forward so the underlying router engine treats it and raises an exception.
-              if as.nil?
-                candidate unless @set.routes.find { |r| r.name == candidate } || candidate !~ /\A[_a-z]/i
-              else
-                candidate
-              end
-            end
-          end
-      end
-
-      def initialize(set) #:nodoc:
-        @set = set
-        @scope = { :path_names => @set.resources_path_names }
-      end
-
-      include Base
-      include HttpHelpers
-      include Redirection
-      include Scoping
-      include Resources
-    end
-  end
-end