backbone-deep-rails 0.0.1

data/vendor/bundle/gems/railties-3.2.11/guides/source/caching_with_rails.textile

@@ -0,0 +1,437 @@
+h2. Caching with Rails: An overview
+
+This guide will teach you what you need to know about avoiding that expensive round-trip to your database and returning what you need to return to the web clients in the shortest time possible.
+
+After reading this guide, you should be able to use and configure:
+
+* Page, action, and fragment caching
+* Sweepers
+* Alternative cache stores
+* Conditional GET support
+
+endprologue.
+
+h3. Basic Caching
+
+This is an introduction to the three types of caching techniques that Rails provides by default without the use of any third party plugins.
+
+To start playing with caching you'll want to ensure that +config.action_controller.perform_caching+ is set to +true+, if you're running in development mode. This flag is normally set in the corresponding +config/environments/*.rb+ and caching is disabled by default for development and test, and enabled for production.
+
+<ruby>
+config.action_controller.perform_caching = true
+</ruby>
+
+h4. Page Caching
+
+Page caching is a Rails mechanism which allows the request for a generated page to be fulfilled by the webserver (i.e. Apache or nginx), without ever having to go through the Rails stack at all. Obviously, this is super-fast. Unfortunately, it can't be applied to every situation (such as pages that need authentication) and since the webserver is literally just serving a file from the filesystem, cache expiration is an issue that needs to be dealt with.
+
+To enable page caching, you need to use the +caches_page+ method.
+
+<ruby>
+class ProductsController < ActionController
+
+  caches_page :index
+
+  def index
+    @products = Products.all
+  end
+end
+</ruby>
+
+Let's say you have a controller called +ProductsController+ and an +index+ action that lists all the products. The first time anyone requests +/products+, Rails will generate a file called +products.html+ and the webserver will then look for that file before it passes the next request for +/products+ to your Rails application.
+
+By default, the page cache directory is set to +Rails.public_path+ (which is usually set to the +public+ folder) and this can be configured by changing the configuration setting +config.action_controller.page_cache_directory+. Changing the default from +public+ helps avoid naming conflicts, since you may want to put other static html in +public+, but changing this will require web server reconfiguration to let the web server know where to serve the cached files from.
+
+The Page Caching mechanism will automatically add a +.html+ extension to requests for pages that do not have an extension to make it easy for the webserver to find those pages and this can be configured by changing the configuration setting +config.action_controller.page_cache_extension+.
+
+In order to expire this page when a new product is added we could extend our example controller like this:
+
+<ruby>
+class ProductsController < ActionController
+
+  caches_page :index
+
+  def index
+    @products = Products.all
+  end
+
+  def create
+    expire_page :action => :index
+  end
+
+end
+</ruby>
+
+If you want a more complicated expiration scheme, you can use cache sweepers to expire cached objects when things change. This is covered in the section on Sweepers.
+
+By default, page caching automatically gzips files (for example, to +products.html.gz+ if user requests +/products+) to reduce the size of data transmitted (web servers are typically configured to use a moderate compression ratio as a compromise, but since precompilation happens once, compression ratio is maximum).
+
+Nginx is able to serve compressed content directly from disk by enabling +gzip_static+:
+
+<plain>
+location /  {
+  gzip_static on; # to serve pre-gzipped version
+}
+</plain>
+
+You can disable gzipping by setting +:gzip+ option to false (for example, if action returns image):
+
+<ruby>
+caches_page :image, :gzip => false
+</ruby>
+
+Or, you can set custom gzip compression level (level names are taken from +Zlib+ constants):
+
+<ruby>
+caches_page :image, :gzip => :best_speed
+</ruby>
+
+NOTE: Page caching ignores all parameters. For example +/products?page=1+ will be written out to the filesystem as +products.html+ with no reference to the +page+ parameter. Thus, if someone requests +/products?page=2+ later, they will get the cached first page. A workaround for this limitation is to include the parameters in the page's path, e.g. +/productions/page/1+.
+
+INFO: Page caching runs in an after filter. Thus, invalid requests won't generate spurious cache entries as long as you halt them. Typically, a redirection in some before filter that checks request preconditions does the job.
+
+h4. Action Caching
+
+One of the issues with Page Caching is that you cannot use it for pages that require to restrict access somehow. This is where Action Caching comes in. Action Caching works like Page Caching except for the fact that the incoming web request does go from the webserver to the Rails stack and Action Pack so that before filters can be run on it before the cache is served. This allows authentication and other restriction to be run while still serving the result of the output from a cached copy.
+
+Clearing the cache works in a similar way to Page Caching, except you use +expire_action+ instead of +expire_page+.
+
+Let's say you only wanted authenticated users to call actions on +ProductsController+.
+
+<ruby>
+class ProductsController < ActionController
+
+  before_filter :authenticate
+  caches_action :index
+
+  def index
+    @products = Product.all
+  end
+
+  def create
+    expire_action :action => :index
+  end
+
+end
+</ruby>
+
+You can also use +:if+ (or +:unless+) to pass a Proc that specifies when the action should be cached. Also, you can use +:layout => false+ to cache without layout so that dynamic information in the layout such as logged in user info or the number of items in the cart can be left uncached. This feature is available as of Rails 2.2.
+
+You can modify the default action cache path by passing a +:cache_path+ option. This will be passed directly to +ActionCachePath.path_for+. This is handy for actions with multiple possible routes that should be cached differently. If a block is given, it is called with the current controller instance.
+
+Finally, if you are using memcached or Ehcache, you can also pass +:expires_in+. In fact, all parameters not used by +caches_action+ are sent to the underlying cache store.
+
+INFO: Action caching runs in an after filter. Thus, invalid requests won't generate spurious cache entries as long as you halt them. Typically, a redirection in some before filter that checks request preconditions does the job.
+
+h4. Fragment Caching
+
+Life would be perfect if we could get away with caching the entire contents of a page or action and serving it out to the world. Unfortunately, dynamic web applications usually build pages with a variety of components not all of which have the same caching characteristics. In order to address such a dynamically created page where different parts of the page need to be cached and expired differently, Rails provides a mechanism called Fragment Caching.
+
+Fragment Caching allows a fragment of view logic to be wrapped in a cache block and served out of the cache store when the next request comes in.
+
+As an example, if you wanted to show all the orders placed on your website in real time and didn't want to cache that part of the page, but did want to cache the part of the page which lists all products available, you could use this piece of code:
+
+<ruby>
+<% Order.find_recent.each do |o| %>
+  <%= o.buyer.name %> bought <%= o.product.name %>
+<% end %>
+
+<% cache do %>
+  All available products:
+  <% Product.all.each do |p| %>
+    <%= link_to p.name, product_url(p) %>
+  <% end %>
+<% end %>
+</ruby>
+
+The cache block in our example will bind to the action that called it and is written out to the same place as the Action Cache, which means that if you want to cache multiple fragments per action, you should provide an +action_suffix+ to the cache call:
+
+<ruby>
+<% cache(:action => 'recent', :action_suffix => 'all_products') do %>
+  All available products:
+</ruby>
+
+and you can expire it using the +expire_fragment+ method, like so:
+
+<ruby>
+expire_fragment(:controller => 'products', :action => 'recent', :action_suffix => 'all_products')
+</ruby>
+
+If you don't want the cache block to bind to the action that called it, You can also use globally keyed fragments by calling the +cache+ method with a key, like so:
+
+<ruby>
+<% cache('all_available_products') do %>
+  All available products:
+<% end %>
+</ruby>
+
+This fragment is then available to all actions in the +ProductsController+ using the key and can be expired the same way:
+
+<ruby>
+expire_fragment('all_available_products')
+</ruby>
+
+h4. Sweepers
+
+Cache sweeping is a mechanism which allows you to get around having a ton of +expire_{page,action,fragment}+ calls in your code. It does this by moving all the work required to expire cached content into an +ActionController::Caching::Sweeper+ subclass. This class is an observer and looks for changes to an object via callbacks, and when a change occurs it expires the caches associated with that object in an around or after filter.
+
+Continuing with our Product controller example, we could rewrite it with a sweeper like this:
+
+<ruby>
+class ProductSweeper < ActionController::Caching::Sweeper
+  observe Product # This sweeper is going to keep an eye on the Product model
+
+  # If our sweeper detects that a Product was created call this
+  def after_create(product)
+    expire_cache_for(product)
+  end
+
+  # If our sweeper detects that a Product was updated call this
+  def after_update(product)
+    expire_cache_for(product)
+  end
+
+  # If our sweeper detects that a Product was deleted call this
+  def after_destroy(product)
+    expire_cache_for(product)
+  end
+
+  private
+  def expire_cache_for(product)
+    # Expire the index page now that we added a new product
+    expire_page(:controller => 'products', :action => 'index')
+
+    # Expire a fragment
+    expire_fragment('all_available_products')
+  end
+end
+</ruby>
+
+You may notice that the actual product gets passed to the sweeper, so if we were caching the edit action for each product, we could add an expire method which specifies the page we want to expire:
+
+<ruby>
+expire_action(:controller => 'products', :action => 'edit', :id => product.id)
+</ruby>
+
+Then we add it to our controller to tell it to call the sweeper when certain actions are called. So, if we wanted to expire the cached content for the list and edit actions when the create action was called, we could do the following:
+
+<ruby>
+class ProductsController < ActionController
+
+  before_filter :authenticate
+  caches_action :index
+  cache_sweeper :product_sweeper
+
+  def index
+    @products = Product.all
+  end
+
+end
+</ruby>
+
+h4. SQL Caching
+
+Query caching is a Rails feature that caches the result set returned by each query so that if Rails encounters the same query again for that request, it will use the cached result set as opposed to running the query against the database again.
+
+For example:
+
+<ruby>
+class ProductsController < ActionController
+
+  def index
+    # Run a find query
+    @products = Product.all
+
+    ...
+
+    # Run the same query again
+    @products = Product.all
+  end
+
+end
+</ruby>
+
+The second time the same query is run against the database, it's not actually going to hit the database. The first time the result is returned from the query it is stored in the query cache (in memory) and the second time it's pulled from memory.
+
+However, it's important to note that query caches are created at the start of an action and destroyed at the end of that action and thus persist only for the duration of the action. If you'd like to store query results in a more persistent fashion, you can in Rails by using low level caching.
+
+h3. Cache Stores
+
+Rails provides different stores for the cached data created by <b>action</b> and <b>fragment</b> caches.
+
+TIP: Page caches are always stored on disk.
+
+h4. Configuration
+
+You can set up your application's default cache store by calling +config.cache_store=+ in the Application definition inside your +config/application.rb+ file or in an Application.configure block in an environment specific configuration file (i.e. +config/environments/*.rb+). The first argument will be the cache store to use and the rest of the argument will be passed as arguments to the cache store constructor.
+
+<ruby>
+config.cache_store = :memory_store
+</ruby>
+
+NOTE: Alternatively, you can call +ActionController::Base.cache_store+ outside of a configuration block.
+
+You can access the cache by calling +Rails.cache+.
+
+h4. ActiveSupport::Cache::Store
+
+This class provides the foundation for interacting with the cache in Rails. This is an abstract class and you cannot use it on its own. Rather you must use a concrete implementation of the class tied to a storage engine. Rails ships with several implementations documented below.
+
+The main methods to call are +read+, +write+, +delete+, +exist?+, and +fetch+. The fetch method takes a block and will either return an existing value from the cache, or evaluate the block and write the result to the cache if no value exists.
+
+There are some common options used by all cache implementations. These can be passed to the constructor or the various methods to interact with entries.
+
+* +:namespace+ - This option can be used to create a namespace within the cache store. It is especially useful if your application shares a cache with other applications. The default value will include the application name and Rails environment.
+
+* +:compress+ - This option can be used to indicate that compression should be used in the cache. This can be useful for transferring large cache entries over a slow network.
+
+* +:compress_threshold+ - This options is used in conjunction with the +:compress+ option to indicate a threshold under which cache entries should not be compressed. This defaults to 16 kilobytes.
+
+* +:expires_in+ - This option sets an expiration time in seconds for the cache entry when it will be automatically removed from the cache.
+
+* +:race_condition_ttl+ - This option is used in conjunction with the +:expires_in+ option. It will prevent race conditions when cache entries expire by preventing multiple processes from simultaneously regenerating the same entry (also known as the dog pile effect). This option sets the number of seconds that an expired entry can be reused while a new value is being regenerated. It's a good practice to set this value if you use the +:expires_in+ option.
+
+h4. ActiveSupport::Cache::MemoryStore
+
+This cache store keeps entries in memory in the same Ruby process. The cache store has a bounded size specified by the +:size+ options to the initializer (default is 32Mb). When the cache exceeds the allotted size, a cleanup will occur and the least recently used entries will be removed.
+
+<ruby>
+config.cache_store = :memory_store, :size => 64.megabytes
+</ruby>
+
+If you're running multiple Ruby on Rails server processes (which is the case if you're using mongrel_cluster or Phusion Passenger), then your Rails server process instances won't be able to share cache data with each other. This cache store is not appropriate for large application deployments, but can work well for small, low traffic sites with only a couple of server processes or for development and test environments.
+
+This is the default cache store implementation.
+
+h4. ActiveSupport::Cache::FileStore
+
+This cache store uses the file system to store entries. The path to the directory where the store files will be stored must be specified when initializing the cache.
+
+<ruby>
+config.cache_store = :file_store, "/path/to/cache/directory"
+</ruby>
+
+With this cache store, multiple server processes on the same host can share a cache. Servers processes running on different hosts could share a cache by using a shared file system, but that set up would not be ideal and is not recommended. The cache store is appropriate for low to medium traffic sites that are served off one or two hosts.
+
+Note that the cache will grow until the disk is full unless you periodically clear out old entries.
+
+h4. ActiveSupport::Cache::MemCacheStore
+
+This cache store uses Danga's +memcached+ server to provide a centralized cache for your application. Rails uses the bundled +memcache-client+ gem by default. This is currently the most popular cache store for production websites. It can be used to provide a single, shared cache cluster with very a high performance and redundancy.
+
+When initializing the cache, you need to specify the addresses for all memcached servers in your cluster. If none is specified, it will assume memcached is running on the local host on the default port, but this is not an ideal set up for larger sites.
+
+The +write+ and +fetch+ methods on this cache accept two additional options that take advantage of features specific to memcached. You can specify +:raw+ to send a value directly to the server with no serialization. The value must be a string or number. You can use memcached direct operation like +increment+ and +decrement+ only on raw values. You can also specify +:unless_exist+ if you don't want memcached to overwrite an existing entry.
+
+<ruby>
+config.cache_store = :mem_cache_store, "cache-1.example.com", "cache-2.example.com"
+</ruby>
+
+h4. ActiveSupport::Cache::EhcacheStore
+
+If you are using JRuby you can use Terracotta's Ehcache as the cache store for your application. Ehcache is an open source Java cache that also offers an enterprise version with increased scalability, management, and commercial support. You must first install the jruby-ehcache-rails3 gem (version 1.1.0 or later) to use this cache store.
+
+<ruby>
+config.cache_store = :ehcache_store
+</ruby>
+
+When initializing the cache, you may use the +:ehcache_config+ option to specify the Ehcache config file to use (where the default is "ehcache.xml" in your Rails config directory), and the :cache_name option to provide a custom name for your cache (the default is rails_cache).
+
+In addition to the standard +:expires_in+ option, the +write+ method on this cache can also accept the additional  +:unless_exist+ option, which will cause the cache store to use Ehcache's +putIfAbsent+ method instead of +put+, and therefore will not overwrite an existing entry. Additionally, the +write+ method supports all of the properties exposed by the "Ehcache Element class":http://ehcache.org/apidocs/net/sf/ehcache/Element.html , including:
+
+|_. Property |_. Argument Type |_. Description |
+| elementEvictionData | ElementEvictionData | Sets this element's eviction data instance. |
+| eternal | boolean | Sets whether the element is eternal. |
+| timeToIdle, tti | int | Sets time to idle |
+| timeToLive, ttl, expires_in | int | Sets time to Live |
+| version | long | Sets the version attribute of the ElementAttributes object. |
+
+These options are passed to the +write+ method as Hash options using either camelCase or underscore notation, as in the following examples:
+
+<ruby>
+Rails.cache.write('key', 'value', :time_to_idle => 60.seconds, :timeToLive => 600.seconds)
+caches_action :index, :expires_in => 60.seconds, :unless_exist => true
+</ruby>
+
+For more information about Ehcache, see "http://ehcache.org/":http://ehcache.org/ .
+For more information about Ehcache for JRuby and Rails, see "http://ehcache.org/documentation/jruby.html":http://ehcache.org/documentation/jruby.html
+
+h4. ActiveSupport::Cache::NullStore
+
+This cache store implementation is meant to be used only in development or test environments and it never stores anything. This can be very useful in development when you have code that interacts directly with +Rails.cache+, but caching may interfere with being able to see the results of code changes. With this cache store, all +fetch+ and +read+ operations will result in a miss.
+
+<ruby>
+config.cache_store = :null_store
+</ruby>
+
+h4. Custom Cache Stores
+
+You can create your own custom cache store by simply extending +ActiveSupport::Cache::Store+ and implementing the appropriate methods. In this way, you can swap in any number of caching technologies into your Rails application.
+
+To use a custom cache store, simple set the cache store to a new instance of the class.
+
+<ruby>
+config.cache_store = MyCacheStore.new
+</ruby>
+
+h4. Cache Keys
+
+The keys used in a cache can be any object that responds to either +:cache_key+ or to +:to_param+. You can implement the +:cache_key+ method on your classes if you need to generate custom keys. Active Record will generate keys based on the class name and record id.
+
+You can use Hashes and Arrays of values as cache keys.
+
+<ruby>
+# This is a legal cache key
+Rails.cache.read(:site => "mysite", :owners => [owner_1, owner_2])
+</ruby>
+
+The keys you use on +Rails.cache+ will not be the same as those actually used with the storage engine. They may be modified with a namespace or altered to fit technology backend constraints. This means, for instance, that you can't save values with +Rails.cache+ and then try to pull them out with the +memcache-client+ gem. However, you also don't need to worry about exceeding the memcached size limit or violating syntax rules.
+
+h3. Conditional GET support
+
+Conditional GETs are a feature of the HTTP specification that provide a way for web servers to tell browsers that the response to a GET request hasn't changed since the last request and can be safely pulled from the browser cache.
+
+They work by using the +HTTP_IF_NONE_MATCH+ and +HTTP_IF_MODIFIED_SINCE+ headers to pass back and forth both a unique content identifier and the timestamp of when the content was last changed. If the browser makes a request where the content identifier (etag) or last modified since timestamp matches the server’s version then the server only needs to send back an empty response with a not modified status.
+
+It is the server's (i.e. our) responsibility to look for a last modified timestamp and the if-none-match header and determine whether or not to send back the full response. With conditional-get support in Rails this is a pretty easy task:
+
+<ruby>
+class ProductsController < ApplicationController
+
+  def show
+    @product = Product.find(params[:id])
+
+    # If the request is stale according to the given timestamp and etag value
+    # (i.e. it needs to be processed again) then execute this block
+    if stale?(:last_modified => @product.updated_at.utc, :etag => @product)
+      respond_to do |wants|
+        # ... normal response processing
+      end
+    end
+
+    # If the request is fresh (i.e. it's not modified) then you don't need to do
+    # anything. The default render checks for this using the parameters
+    # used in the previous call to stale? and will automatically send a
+    # :not_modified. So that's it, you're done.
+  end
+end
+</ruby>
+
+If you don't have any special response processing and are using the default rendering mechanism (i.e. you're not using respond_to or calling render yourself) then you’ve got an easy helper in fresh_when:
+
+<ruby>
+class ProductsController < ApplicationController
+
+  # This will automatically send back a :not_modified if the request is fresh,
+  # and will render the default template (product.*) if it's stale.
+
+  def show
+    @product = Product.find(params[:id])
+    fresh_when :last_modified => @product.published_at.utc, :etag => @product
+  end
+end
+</ruby>
+
+h3. Further reading
+
+* "Scaling Rails Screencasts":http://railslab.newrelic.com/scaling-rails

data/vendor/bundle/gems/railties-3.2.11/guides/source/command_line.textile

@@ -0,0 +1,574 @@
+h2. A Guide to The Rails Command Line
+
+Rails comes with every command line tool you'll need to
+
+* Create a Rails application
+* Generate models, controllers, database migrations, and unit tests
+* Start a development server
+* Experiment with objects through an interactive shell
+* Profile and benchmark your new creation
+
+endprologue.
+
+NOTE: This tutorial assumes you have basic Rails knowledge from reading the "Getting Started with Rails Guide":getting_started.html.
+
+WARNING. This Guide is based on Rails 3.0. Some of the code shown here will not work in earlier versions of Rails.
+
+h3. Command Line Basics
+
+There are a few commands that are absolutely critical to your everyday usage of Rails. In the order of how much you'll probably use them are:
+
+* <tt>rails console</tt>
+* <tt>rails server</tt>
+* <tt>rake</tt>
+* <tt>rails generate</tt>
+* <tt>rails dbconsole</tt>
+* <tt>rails new app_name</tt>
+
+Let's create a simple Rails application to step through each of these commands in context.
+
+h4. +rails new+
+
+The first thing we'll want to do is create a new Rails application by running the +rails new+ command after installing Rails.
+
+WARNING: You can install the rails gem by typing +gem install rails+, if you don't have it already. Follow the instructions in the "Rails 3 Release Notes":/3_0_release_notes.html
+
+<shell>
+$ rails new commandsapp
+     create
+     create  README.rdoc
+     create  .gitignore
+     create  Rakefile
+     create  config.ru
+     create  Gemfile
+     create  app
+     ...
+     create  tmp/cache
+     create  tmp/pids
+     create  vendor/plugins
+     create  vendor/plugins/.gitkeep
+</shell>
+
+Rails will set you up with what seems like a huge amount of stuff for such a tiny command! You've got the entire Rails directory structure now with all the code you need to run our simple application right out of the box.
+
+h4. +rails server+
+
+The +rails server+ command launches a small web server named WEBrick which comes bundled with Ruby. You'll use this any time you want to access your application through a web browser.
+
+INFO: WEBrick isn't your only option for serving Rails. We'll get to that "later":#different-servers.
+
+With no further work, +rails server+ will run our new shiny Rails app:
+
+<shell>
+$ cd commandsapp
+$ rails server
+=> Booting WEBrick
+=> Rails 3.1.0 application starting in development on http://0.0.0.0:3000
+=> Call with -d to detach
+=> Ctrl-C to shutdown server
+[2010-04-18 03:20:33] INFO  WEBrick 1.3.1
+[2010-04-18 03:20:33] INFO  ruby 1.8.7 (2010-01-10) [x86_64-linux]
+[2010-04-18 03:20:33] INFO  WEBrick::HTTPServer#start: pid=26086 port=3000
+</shell>
+
+With just three commands we whipped up a Rails server listening on port 3000. Go to your browser and open "http://localhost:3000":http://localhost:3000, you will see a basic Rails app running.
+
+You can also use the alias "s" to start the server: <tt>rails s</tt>.
+
+The server can be run on a different port using the +-p+ option. The default development environment can be changed using +-e+.
+
+<shell>
+$ rails server -e production -p 4000
+</shell>
+
+The +-b+ option binds Rails to the specified ip, by default it is 0.0.0.0. You can run a server as a daemon by passing a +-d+ option.
+
+h4. +rails generate+
+
+The +rails generate+ command uses templates to create a whole lot of things. Running +rails generate+ by itself gives a list of available generators:
+
+You can also use the alias "g" to invoke the generator command: <tt>rails g</tt>.
+
+<shell>
+$ rails generate
+Usage: rails generate GENERATOR [args] [options]
+
+...
+...
+
+Please choose a generator below.
+
+Rails:
+  controller
+  generator
+  ...
+  ...
+</shell>
+
+NOTE: You can install more generators through generator gems, portions of plugins you'll undoubtedly install, and you can even create your own!
+
+Using generators will save you a large amount of time by writing *boilerplate code*, code that is necessary for the app to work.
+
+Let's make our own controller with the controller generator. But what command should we use? Let's ask the generator:
+
+INFO: All Rails console utilities have help text. As with most *nix utilities, you can try adding +--help+ or +-h+ to the end, for example +rails server --help+.
+
+<shell>
+$ rails generate controller
+Usage: rails generate controller NAME [action action] [options]
+
+...
+...
+
+Example:
+    rails generate controller CreditCard open debit credit close
+
+    Credit card controller with URLs like /credit_card/debit.
+        Controller: app/controllers/credit_card_controller.rb
+        Views:      app/views/credit_card/debit.html.erb [...]
+        Helper:     app/helpers/credit_card_helper.rb
+        Test:       test/functional/credit_card_controller_test.rb
+
+Modules Example:
+    rails generate controller 'admin/credit_card' suspend late_fee
+
+    Credit card admin controller with URLs like /admin/credit_card/suspend.
+        Controller: app/controllers/admin/credit_card_controller.rb
+        Views:      app/views/admin/credit_card/debit.html.erb [...]
+        Helper:     app/helpers/admin/credit_card_helper.rb
+        Test:       test/functional/admin/credit_card_controller_test.rb
+</shell>
+
+The controller generator is expecting parameters in the form of +generate controller ControllerName action1 action2+. Let's make a +Greetings+ controller with an action of *hello*, which will say something nice to us.
+
+<shell>
+$ rails generate controller Greetings hello
+     create  app/controllers/greetings_controller.rb
+      route  get "greetings/hello"
+     invoke  erb
+     create    app/views/greetings
+     create    app/views/greetings/hello.html.erb
+     invoke  test_unit
+     create    test/functional/greetings_controller_test.rb
+     invoke  helper
+     create    app/helpers/greetings_helper.rb
+     invoke    test_unit
+     create      test/unit/helpers/greetings_helper_test.rb
+     invoke  assets
+     create    app/assets/javascripts/greetings.js
+     invoke    css
+     create      app/assets/stylesheets/greetings.css
+
+</shell>
+
+What all did this generate? It made sure a bunch of directories were in our application, and created a controller file, a view file, a functional test file, a helper for the view, a javascript file and a stylesheet file.
+
+Check out the controller and modify it a little (in +app/controllers/greetings_controller.rb+):
+
+<ruby>
+class GreetingsController < ApplicationController
+  def hello
+    @message = "Hello, how are you today?"
+  end
+end
+</ruby>
+
+Then the view, to display our message (in +app/views/greetings/hello.html.erb+):
+
+<html>
+<h1>A Greeting for You!</h1>
+<p><%= @message %></p>
+</html>
+
+Fire up your server using +rails server+.
+
+<shell>
+$ rails server
+=> Booting WEBrick...
+</shell>
+
+WARNING: Make sure that you do not have any "tilde backup" files in +app/views/(controller)+, or else WEBrick will _not_ show the expected output. This seems to be a *bug* in Rails 2.3.0.
+
+The URL will be "http://localhost:3000/greetings/hello":http://localhost:3000/greetings/hello.
+
+INFO: With a normal, plain-old Rails application, your URLs will generally follow the pattern of http://(host)/(controller)/(action), and a URL like http://(host)/(controller) will hit the *index* action of that controller.
+
+Rails comes with a generator for data models too.
+
+<shell>
+$ rails generate model
+Usage: rails generate model NAME [field:type field:type] [options]
+
+...
+
+Examples:
+    rails generate model account
+
+            Model:      app/models/account.rb
+            Test:       test/unit/account_test.rb
+            Fixtures:   test/fixtures/accounts.yml
+            Migration:  db/migrate/XXX_add_accounts.rb
+
+    rails generate model post title:string body:text published:boolean
+
+        Creates a Post model with a string title, text body, and published flag.
+</shell>
+
+NOTE: For a list of available field types, refer to the "API documentation":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/TableDefinition.html#method-i-column for the column method for the +TableDefinition+ class.
+
+But instead of generating a model directly (which we'll be doing later), let's set up a scaffold. A *scaffold* in Rails is a full set of model, database migration for that model, controller to manipulate it, views to view and manipulate the data, and a test suite for each of the above.
+
+We will set up a simple resource called "HighScore" that will keep track of our highest score on video games we play.
+
+<shell>
+$ rails generate scaffold HighScore game:string score:integer
+    exists  app/models/
+    exists  app/controllers/
+    exists  app/helpers/
+    create  app/views/high_scores
+    create  app/views/layouts/
+    exists  test/functional/
+    create  test/unit/
+    create  app/assets/stylesheets/
+    create  app/views/high_scores/index.html.erb
+    create  app/views/high_scores/show.html.erb
+    create  app/views/high_scores/new.html.erb
+    create  app/views/high_scores/edit.html.erb
+    create  app/views/layouts/high_scores.html.erb
+    create  app/assets/stylesheets/scaffold.css.scss
+    create  app/controllers/high_scores_controller.rb
+    create  test/functional/high_scores_controller_test.rb
+    create  app/helpers/high_scores_helper.rb
+     route  resources :high_scores
+dependency  model
+    exists    app/models/
+    exists    test/unit/
+    create    test/fixtures/
+    create    app/models/high_score.rb
+    create    test/unit/high_score_test.rb
+    create    test/fixtures/high_scores.yml
+    exists    db/migrate
+    create    db/migrate/20100209025147_create_high_scores.rb
+</shell>
+
+The generator checks that there exist the directories for models, controllers, helpers, layouts, functional and unit tests, stylesheets, creates the views, controller, model and database migration for HighScore (creating the +high_scores+ table and fields), takes care of the route for the *resource*, and new tests for everything.
+
+The migration requires that we *migrate*, that is, run some Ruby code (living in that +20100209025147_create_high_scores.rb+) to modify the schema of our database. Which database? The sqlite3 database that Rails will create for you when we run the +rake db:migrate+ command. We'll talk more about Rake in-depth in a little while.
+
+<shell>
+$ rake db:migrate
+(in /home/foobar/commandsapp)
+==  CreateHighScores: migrating ===============================================
+-- create_table(:high_scores)
+   -> 0.0026s
+==  CreateHighScores: migrated (0.0028s) ======================================
+</shell>
+
+INFO: Let's talk about unit tests. Unit tests are code that tests and makes assertions about code. In unit testing, we take a little part of code, say a method of a model, and test its inputs and outputs. Unit tests are your friend. The sooner you make peace with the fact that your quality of life will drastically increase when you unit test your code, the better. Seriously. We'll make one in a moment.
+
+Let's see the interface Rails created for us.
+
+<shell>
+$ rails server
+</shell>
+
+Go to your browser and open "http://localhost:3000/high_scores":http://localhost:3000/high_scores, now we can create new high scores (55,160 on Space Invaders!)
+
+h4. +rails console+
+
+The +console+ command lets you interact with your Rails application from the command line. On the underside, +rails console+ uses IRB, so if you've ever used it, you'll be right at home. This is useful for testing out quick ideas with code and changing data server-side without touching the website.
+
+You can also use the alias "c" to invoke the console: <tt>rails c</tt>.
+
+If you wish to test out some code without changing any data, you can do that by invoking +rails console --sandbox+.
+
+<shell>
+$ rails console --sandbox
+Loading development environment in sandbox (Rails 3.1.0)
+Any modifications you make will be rolled back on exit
+irb(main):001:0>
+</shell>
+
+h4. +rails dbconsole+
+
++rails dbconsole+ figures out which database you're using and drops you into whichever command line interface you would use with it (and figures out the command line parameters to give to it, too!). It supports MySQL, PostgreSQL, SQLite and SQLite3.
+
+You can also use the alias "db" to invoke the dbconsole: <tt>rails db</tt>.
+
+h4. +rails plugin+
+
+The +rails plugin+ command simplifies plugin management. Plugins can be installed by name or their repository URLs. You need to have Git installed if you want to install a plugin from a Git repo. The same holds for Subversion too.
+
+<shell>
+$ rails plugin install https://github.com/technoweenie/acts_as_paranoid.git
++ ./CHANGELOG
++ ./MIT-LICENSE
+...
+...
+</shell>
+
+h4. +rails runner+
+
+<tt>runner</tt> runs Ruby code in the context of Rails non-interactively. For instance:
+
+<shell>
+$ rails runner "Model.long_running_method"
+</shell>
+
+You can also use the alias "r" to invoke the runner: <tt>rails r</tt>.
+
+You can specify the environment in which the +runner+ command should operate using the +-e+ switch.
+
+<shell>
+$ rails runner -e staging "Model.long_running_method"
+</shell>
+
+h4. +rails destroy+
+
+Think of +destroy+ as the opposite of +generate+. It'll figure out what generate did, and undo it.
+
+You can also use the alias "d" to invoke the destroy command: <tt>rails d</tt>.
+
+<shell>
+$ rails generate model Oops
+      exists  app/models/
+      exists  test/unit/
+      exists  test/fixtures/
+      create  app/models/oops.rb
+      create  test/unit/oops_test.rb
+      create  test/fixtures/oops.yml
+      exists  db/migrate
+      create  db/migrate/20081221040817_create_oops.rb
+$ rails destroy model Oops
+    notempty  db/migrate
+    notempty  db
+          rm  db/migrate/20081221040817_create_oops.rb
+          rm  test/fixtures/oops.yml
+          rm  test/unit/oops_test.rb
+          rm  app/models/oops.rb
+    notempty  test/fixtures
+    notempty  test
+    notempty  test/unit
+    notempty  test
+    notempty  app/models
+    notempty  app
+</shell>
+
+h3. Rake
+
+Rake is Ruby Make, a standalone Ruby utility that replaces the Unix utility 'make', and uses a 'Rakefile' and +.rake+ files to build up a list of tasks. In Rails, Rake is used for common administration tasks, especially sophisticated ones that build off of each other.
+
+You can get a list of Rake tasks available to you, which will often depend on your current directory, by typing +rake --tasks+. Each task has a description, and should help you find the thing you need.
+
+<shell>
+$ rake --tasks
+(in /home/foobar/commandsapp)
+rake db:abort_if_pending_migrations       # Raises an error if there are pending migrations
+rake db:charset                           # Retrieves the charset for the current environment's database
+rake db:collation                         # Retrieves the collation for the current environment's database
+rake db:create                            # Create the database defined in config/database.yml for the current Rails.env
+...
+...
+rake tmp:pids:clear                       # Clears all files in tmp/pids
+rake tmp:sessions:clear                   # Clears all files in tmp/sessions
+rake tmp:sockets:clear                    # Clears all files in tmp/sockets
+</shell>
+
+h4. +about+
+
+<tt>rake about</tt> gives information about version numbers for Ruby, RubyGems, Rails, the Rails subcomponents, your application's folder, the current Rails environment name, your app's database adapter, and schema version. It is useful when you need to ask for help, check if a security patch might affect you, or when you need some stats for an existing Rails installation.
+
+<shell>
+$ rake about
+About your application's environment
+Ruby version              1.8.7 (x86_64-linux)
+RubyGems version          1.3.6
+Rack version              1.3
+Rails version             3.2.0.beta
+JavaScript Runtime        Node.js (V8)
+Active Record version     3.2.0.beta
+Action Pack version       3.2.0.beta
+Active Resource version   3.2.0.beta
+Action Mailer version     3.2.0.beta
+Active Support version    3.2.0.beta
+Middleware                ActionDispatch::Static, Rack::Lock, Rack::Runtime, Rack::MethodOverride, ActionDispatch::RequestId, Rails::Rack::Logger, ActionDispatch::ShowExceptions, ActionDispatch::DebugExceptions, ActionDispatch::RemoteIp, ActionDispatch::Reloader, ActionDispatch::Callbacks, ActiveRecord::ConnectionAdapters::ConnectionManagement, ActiveRecord::QueryCache, ActionDispatch::Cookies, ActionDispatch::Session::CookieStore, ActionDispatch::Flash, ActionDispatch::ParamsParser, ActionDispatch::Head, Rack::ConditionalGet, Rack::ETag, ActionDispatch::BestStandardsSupport
+Application root          /home/foobar/commandsapp
+Environment               development
+Database adapter          sqlite3
+Database schema version   20110805173523
+</shell>
+
+h4. +assets+
+
+You can precompile the assets in <tt>app/assets</tt> using <tt>rake assets:precompile</tt> and remove those compiled assets using <tt>rake assets:clean</tt>.
+
+h4. +db+
+
+The most common tasks of the +db:+ Rake namespace are +migrate+ and +create+, and it will pay off to try out all of the migration rake tasks (+up+, +down+, +redo+, +reset+). +rake db:version+ is useful when troubleshooting, telling you the current version of the database.
+
+More information about migrations can be found in the "Migrations":migrations.html guide.
+
+h4. +doc+
+
+The +doc:+ namespace has the tools to generate documentation for your app, API documentation, guides. Documentation can also be stripped which is mainly useful for slimming your codebase, like if you're writing a Rails application for an embedded platform.
+
+* +rake doc:app+ generates documentation for your application in +doc/app+.
+* +rake doc:guides+ generates Rails guides in +doc/guides+.
+* +rake doc:rails+ generates API documentation for Rails in +doc/api+.
+* +rake doc:plugins+ generates API documentation for all the plugins installed in the application in +doc/plugins+.
+* +rake doc:clobber_plugins+ removes the generated documentation for all plugins.
+
+h4. +notes+
+
++rake notes+ will search through your code for comments beginning with FIXME, OPTIMIZE or TODO. The search is done in files with extension +.builder+, +.rb+, +.erb+, +.haml+ and +.slim+ for both default and custom annotations.
+
+<shell>
+$ rake notes
+(in /home/foobar/commandsapp)
+app/controllers/admin/users_controller.rb:
+  * [ 20] [TODO] any other way to do this?
+  * [132] [FIXME] high priority for next deploy
+
+app/model/school.rb:
+  * [ 13] [OPTIMIZE] refactor this code to make it faster
+  * [ 17] [FIXME]
+</shell>
+
+If you are looking for a specific annotation, say FIXME, you can use +rake notes:fixme+. Note that you have to lower case the annotation's name.
+
+<shell>
+$ rake notes:fixme
+(in /home/foobar/commandsapp)
+app/controllers/admin/users_controller.rb:
+  * [132] high priority for next deploy
+
+app/model/school.rb:
+  * [ 17]
+</shell>
+
+You can also use custom annotations in your code and list them using +rake notes:custom+ by specifying the annotation using an environment variable +ANNOTATION+.
+
+<shell>
+$ rake notes:custom ANNOTATION=BUG
+(in /home/foobar/commandsapp)
+app/model/post.rb:
+  * [ 23] Have to fix this one before pushing!
+</shell>
+
+NOTE. When using specific annotations and custom annotations, the annotation name (FIXME, BUG etc) is not displayed in the output lines.
+
+h4. +routes+
+
++rake routes+ will list all of your defined routes, which is useful for tracking down routing problems in your app, or giving you a good overview of the URLs in an app you're trying to get familiar with.
+
+h4. +test+
+
+INFO: A good description of unit testing in Rails is given in "A Guide to Testing Rails Applications":testing.html
+
+Rails comes with a test suite called <tt>Test::Unit</tt>. Rails owes its stability to the use of tests. The tasks available in the +test:+ namespace helps in running the different tests you will hopefully write.
+
+h4. +tmp+
+
+The <tt>Rails.root/tmp</tt> directory is, like the *nix /tmp directory, the holding place for temporary files like sessions (if you're using a file store for files), process id files, and cached actions.
+
+The +tmp:+ namespaced tasks will help you clear the <tt>Rails.root/tmp</tt> directory:
+
+* +rake tmp:cache:clear+ clears <tt>tmp/cache</tt>.
+* +rake tmp:sessions:clear+ clears <tt>tmp/sessions</tt>.
+* +rake tmp:sockets:clear+ clears <tt>tmp/sockets</tt>.
+* +rake tmp:clear+ clears all the three: cache, sessions and sockets.
+
+h4. Miscellaneous
+
+* +rake stats+ is great for looking at statistics on your code, displaying things like KLOCs (thousands of lines of code) and your code to test ratio.
+* +rake secret+ will give you a pseudo-random key to use for your session secret.
+* <tt>rake time:zones:all</tt> lists all the timezones Rails knows about.
+
+h3. The Rails Advanced Command Line
+
+More advanced use of the command line is focused around finding useful (even surprising at times) options in the utilities, and fitting those to your needs and specific work flow. Listed here are some tricks up Rails' sleeve.
+
+h4. Rails with Databases and SCM
+
+When creating a new Rails application, you have the option to specify what kind of database and what kind of source code management system your application is going to use. This will save you a few minutes, and certainly many keystrokes.
+
+Let's see what a +--git+ option and a +--database=postgresql+ option will do for us:
+
+<shell>
+$ mkdir gitapp
+$ cd gitapp
+$ git init
+Initialized empty Git repository in .git/
+$ rails new . --git --database=postgresql
+      exists
+      create  app/controllers
+      create  app/helpers
+...
+...
+      create  tmp/cache
+      create  tmp/pids
+      create  Rakefile
+add 'Rakefile'
+      create  README.rdoc
+add 'README.rdoc'
+      create  app/controllers/application_controller.rb
+add 'app/controllers/application_controller.rb'
+      create  app/helpers/application_helper.rb
+...
+      create  log/test.log
+add 'log/test.log'
+</shell>
+
+We had to create the *gitapp* directory and initialize an empty git repository before Rails would add files it created to our repository. Let's see what it put in our database configuration:
+
+<shell>
+$ cat config/database.yml
+# PostgreSQL. Versions 8.2 and up are supported.
+#
+# Install the ruby-postgres driver:
+#   gem install ruby-postgres
+# On Mac OS X:
+#   gem install ruby-postgres -- --include=/usr/local/pgsql
+# On Windows:
+#   gem install ruby-postgres
+#       Choose the win32 build.
+#       Install PostgreSQL and put its /bin directory on your path.
+development:
+  adapter: postgresql
+  encoding: unicode
+  database: gitapp_development
+  pool: 5
+  username: gitapp
+  password:
+...
+...
+</shell>
+
+It also generated some lines in our database.yml configuration corresponding to our choice of PostgreSQL for database.
+
+NOTE. The only catch with using the SCM options is that you have to make your application's directory first, then initialize your SCM, then you can run the +rails new+ command to generate the basis of your app.
+
+h4(#different-servers). +server+ with Different Backends
+
+Many people have created a large number of different web servers in Ruby, and many of them can be used to run Rails. Since version 2.3, Rails uses Rack to serve its webpages, which means that any webserver that implements a Rack handler can be used. This includes WEBrick, Mongrel, Thin, and Phusion Passenger (to name a few!).
+
+NOTE: For more details on the Rack integration, see "Rails on Rack":rails_on_rack.html.
+
+To use a different server, just install its gem, then use its name for the first parameter to +rails server+:
+
+<shell>
+$ sudo gem install mongrel
+Building native extensions.  This could take a while...
+Building native extensions.  This could take a while...
+Successfully installed gem_plugin-0.2.3
+Successfully installed fastthread-1.0.1
+Successfully installed cgi_multipart_eof_fix-2.5.0
+Successfully installed mongrel-1.1.5
+...
+...
+Installing RDoc documentation for mongrel-1.1.5...
+$ rails server mongrel
+=> Booting Mongrel (use 'rails server webrick' to force WEBrick)
+=> Rails 3.1.0 application starting on http://0.0.0.0:3000
+...
+</shell>