axtro-rubber 1.2.3 → 1.5.7

data/lib/generators/vulcanize/templates/postgresql/config/rubber/role/db/crontab

@@ -0,0 +1,14 @@
+<%
+  @read_cmd = 'crontab -l'
+  @write_cmd = 'crontab -'
+  @additive = ["# rubber-postgresql-start", "# rubber-postgresql-end"]
+%>
+
+<%
+  # Backup db every 3 hours to secondary db if available, else primary db
+  backup_db_host = rubber_instances.for_role('db', {}).first rescue nil
+  backup_db_host ||= rubber_instances.for_role('db', 'primary' => true).first
+  if backup_db_host.name == rubber_env.host
+%>
+0 */3 * * * BACKUP_DIR=/mnt/db_backups DBUSER=<%= rubber_env.db_user %> DBPASS=<%= rubber_env.db_pass %> DBNAME=<%= rubber_env.db_name %> DBHOST=<%= backup_db_host.full_name %> <%= RUBBER_ROOT %>/script/cron-rake rubber:backup_db
+<% end %>

data/lib/generators/vulcanize/templates/postgresql/config/rubber/role/db/monit-postgresql.conf

@@ -0,0 +1,10 @@
+<%
+  @path = '/etc/monit/monit.d/monit-postgresql.conf'
+%>
+
+check process postgresql with pidfile <%= rubber_env.postgresql_pid_file %>
+   group postgresql-<%= RUBBER_ENV %>
+   start program = "<%= rubber_env.postgresql_ctl %> restart"
+   stop program = "<%= rubber_env.postgresql_ctl %> stop"
+   if failed host 127.0.0.1 port 5432 protocol pgsql then alert
+   if 5 restarts within 5 cycles then timeout

data/lib/generators/vulcanize/templates/postgresql/config/rubber/role/db/pg_hba.conf

@@ -0,0 +1,89 @@
+<%
+  @path = "#{rubber_env.postgresql_conf_dir}/pg_hba.conf"
+%>
+# PostgreSQL Client Authentication Configuration File
+# ===================================================
+#
+# Refer to the "Client Authentication" section in the
+# PostgreSQL documentation for a complete description
+# of this file.  A short synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which PostgreSQL user names they can use, which
+# databases they can access.  Records take one of these forms:
+#
+# local      DATABASE  USER  METHOD  [OPTIONS]
+# host       DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
+# hostssl    DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
+# hostnossl  DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain socket,
+# "host" is either a plain or SSL-encrypted TCP/IP socket, "hostssl" is an
+# SSL-encrypted TCP/IP socket, and "hostnossl" is a plain TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", "samerole", a database name, or
+# a comma-separated list thereof.
+#
+# USER can be "all", a user name, a group name prefixed with "+", or
+# a comma-separated list thereof.  In both the DATABASE and USER fields
+# you can also write a file name prefixed with "@" to include names from
+# a separate file.
+#
+# CIDR-ADDRESS specifies the set of hosts the record matches.
+# It is made up of an IP address and a CIDR mask that is an integer
+# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
+# the number of significant bits in the mask.  Alternatively, you can write
+# an IP address and netmask in separate columns to specify the set of hosts.
+#
+# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi", "krb5",
+# "ident", "pam", "ldap" or "cert".  Note that "password" sends passwords
+# in clear text; "md5" is preferred since it sends encrypted passwords.
+#
+# OPTIONS are a set of options for the authentication in the format
+# NAME=VALUE. The available options depend on the different authentication
+# methods - refer to the "Client Authentication" section in the documentation
+# for a list of which options are available for which authentication methods.
+#
+# Database and user names containing spaces, commas, quotes and other special
+# characters must be quoted. Quoting one of the keywords "all", "sameuser" or
+# "samerole" makes the name lose its special character, and just match a
+# database or username with that name.
+#
+# This file is read on server startup and when the postmaster receives
+# a SIGHUP signal.  If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect.  You can use
+# "pg_ctl reload" to do that.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make PostgreSQL listen
+# on a non-local interface via the listen_addresses configuration parameter,
+# or via the -i or -h command line switches.
+#
+
+
+
+
+# DO NOT DISABLE!
+# If you change this first entry you will need to make sure that the
+# database
+# super user can access the database using some other method.
+# Noninteractive
+# access to all databases is required during automatic maintenance
+# (custom daily cronjobs, replication, and similar tasks).
+#
+# Database administrative login by UNIX sockets
+local   all         postgres                          ident
+
+# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
+<%
+  scheme = rubber_env.db_pass ? 'md5' : 'trust'
+%>
+local   all         <%= rubber_env.db_user %>                 <%= scheme %>
+host    all         all                         127.0.0.1/32  <%= scheme %>
+host    all         all                         ::1/128       <%= scheme %>
+host    all         <%= rubber_env.db_user %>   10.0.0.1/8    <%= scheme %>

data/lib/generators/vulcanize/templates/postgresql/config/rubber/role/db/postgresql-sysctl.conf

@@ -0,0 +1,6 @@
+<%
+  @path = "/etc/sysctl.d/30-postgresql.conf"
+  @post = "service procps start"
+%>
+kernel.shmmax=1610612736
+kernel.shmall=393216

data/lib/generators/vulcanize/templates/postgresql/config/rubber/role/db/postgresql.conf

@@ -0,0 +1,504 @@
+<%
+  @path = "#{rubber_env.postgresql_conf_dir}/postgresql.conf"
+%>
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                                                   h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+data_directory = '<%= rubber_env.postgresql_data_dir %>'   # use data in another directory
+          # (change requires restart)
+hba_file = '<%= rubber_env.postgresql_conf_dir %>/pg_hba.conf' # host-based authentication file
+          # (change requires restart)
+ident_file = '<%= rubber_env.postgresql_conf_dir %>/pg_ident.conf' # ident configuration file
+          # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+external_pid_file = '<%= rubber_env.postgresql_pid_file %>'    # write an extra PID file
+          # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+listen_addresses = '*'   # what IP address(es) to listen on;
+          # comma-separated list of addresses;
+          # defaults to 'localhost', '*' = all
+          # (change requires restart)
+port = 5432       # (change requires restart)
+max_connections = 100     # (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per 
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3 # (change requires restart)
+unix_socket_directory = '/var/run/postgresql'   # (change requires restart)
+#unix_socket_group = ''     # (change requires restart)
+#unix_socket_permissions = 0777   # begin with 0 to use octal notation
+          # (change requires restart)
+#bonjour_name = ''      # defaults to the computer name
+          # (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min    # 1s-600s
+#ssl = true        # (change requires restart)
+#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'  # allowed SSL ciphers
+          # (change requires restart)
+#ssl_renegotiation_limit = 512MB  # amount of data between renegotiations
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres'   # (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0    # TCP_KEEPIDLE, in seconds;
+          # 0 selects the system default
+#tcp_keepalives_interval = 0    # TCP_KEEPINTVL, in seconds;
+          # 0 selects the system default
+#tcp_keepalives_count = 0   # TCP_KEEPCNT;
+          # 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 28MB     # min 128kB
+          # (change requires restart)
+#temp_buffers = 8MB     # min 800kB
+#max_prepared_transactions = 0    # zero disables the feature
+          # (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 1MB       # min 64kB
+#maintenance_work_mem = 16MB    # min 1MB
+#max_stack_depth = 2MB      # min 100kB
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000   # min 25
+          # (change requires restart)
+#shared_preload_libraries = ''    # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0ms    # 0-100 milliseconds
+#vacuum_cost_page_hit = 1   # 0-10000 credits
+#vacuum_cost_page_miss = 10   # 0-10000 credits
+#vacuum_cost_page_dirty = 20    # 0-10000 credits
+#vacuum_cost_limit = 200    # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms     # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100    # 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0    # 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1   # 1-1000. 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#fsync = on       # turns forced synchronization on or off
+#synchronous_commit = on    # immediate fsync at commit
+#wal_sync_method = fsync    # the default is the first option 
+          # supported by the operating system:
+          #   open_datasync
+          #   fdatasync
+          #   fsync
+          #   fsync_writethrough
+          #   open_sync
+#full_page_writes = on      # recover from partial page writes
+#wal_buffers = 64kB     # min 32kB
+          # (change requires restart)
+#wal_writer_delay = 200ms   # 1-10000 milliseconds
+
+#commit_delay = 0     # range 0-100000, in microseconds
+#commit_siblings = 5      # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3    # in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min    # range 30s-1h
+#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s   # 0 disables
+
+# - Archiving -
+
+#archive_mode = off   # allows archiving to be done
+        # (change requires restart)
+#archive_command = 'cp -i %p <%= rubber_env.postgresql_archive_dir %>/%f </dev/null'   # command to use to archive a logfile segment
+#archive_timeout = 300    # force a logfile segment switch after this
+        # number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0      # measured on an arbitrary scale
+#random_page_cost = 4.0     # same scale as above
+#cpu_tuple_cost = 0.01      # same scale as above
+#cpu_index_tuple_cost = 0.005   # same scale as above
+#cpu_operator_cost = 0.0025   # same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5      # range 1-10
+#geqo_pool_size = 0     # selects default based on effort
+#geqo_generations = 0     # selects default based on effort
+#geqo_selection_bias = 2.0    # range 1.5-2.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100  # range 1-10000
+#constraint_exclusion = partition # on, off, or partition
+#cursor_tuple_fraction = 0.1    # range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8    # 1 disables collapsing of explicit 
+          # JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'   # Valid values are combinations of
+          # stderr, csvlog, syslog and eventlog,
+          # depending on platform.  csvlog
+          # requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off    # Enable capturing of stderr and csvlog
+          # into log files. Required to be on for
+          # csvlogs.
+          # (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'   # directory where log files are written,
+          # can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'  # log file name pattern,
+          # can include strftime() escapes
+#log_truncate_on_rotation = off   # If on, an existing log file of the
+          # same name as the new log file will be
+          # truncated rather than appended to.
+          # But such truncation only occurs on
+          # time-driven rotation, not on restarts
+          # or size-driven rotation.  Default is
+          # off, meaning append to existing files
+          # in all cases.
+#log_rotation_age = 1d      # Automatic rotation of logfiles will
+          # happen after that time.  0 disables.
+#log_rotation_size = 10MB   # Automatic rotation of logfiles will 
+          # happen after that much log output.
+          # 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+#silent_mode = off      # Run server silently.
+          # DO NOT USE without syslog or
+          # logging_collector
+          # (change requires restart)
+
+
+# - When to Log -
+
+#client_min_messages = notice   # values in order of decreasing detail:
+          #   debug5
+          #   debug4
+          #   debug3
+          #   debug2
+          #   debug1
+          #   log
+          #   notice
+          #   warning
+          #   error
+
+#log_min_messages = warning   # values in order of decreasing detail:
+          #   debug5
+          #   debug4
+          #   debug3
+          #   debug2
+          #   debug1
+          #   info
+          #   notice
+          #   warning
+          #   error
+          #   log
+          #   fatal
+          #   panic
+
+#log_error_verbosity = default    # terse, default, or verbose messages
+
+#log_min_error_statement = error  # values in order of decreasing detail:
+          #   debug5
+          #   debug4
+          #   debug3
+          #   debug2
+          #   debug1
+          #   info
+          #   notice
+          #   warning
+          #   error
+          #   log
+          #   fatal
+          #   panic (effectively off)
+
+log_min_duration_statement = 1  # -1 is disabled, 0 logs all statements
+          # and their durations, > 0 logs only
+          # statements running at least this number
+          # of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_hostname = off
+log_line_prefix = '%t '     # special values:
+          #   %u = user name
+          #   %d = database name
+          #   %r = remote host and port
+          #   %h = remote host
+          #   %p = process ID
+          #   %t = timestamp without milliseconds
+          #   %m = timestamp with milliseconds
+          #   %i = command tag
+          #   %c = session ID
+          #   %l = session line number
+          #   %s = session start timestamp
+          #   %v = virtual transaction ID
+          #   %x = transaction ID (0 if none)
+          #   %q = stop here in non-session
+          #        processes
+          #   %% = '%'
+          # e.g. '<%u%%%d> '
+#log_lock_waits = off     # log lock waits >= deadlock_timeout
+#log_statement = 'none'     # none, ddl, mod, all
+#log_temp_files = -1      # log temporary files equal or larger
+          # than the specified size in kilobytes;
+          # -1 disables, 0 logs all temp files
+#log_timezone = unknown     # actually, defaults to TZ environment
+          # setting
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+track_counts = on
+#track_functions = none     # none, pl, all
+#track_activity_query_size = 1024
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+autovacuum = on      # Enable autovacuum subprocess?  'on'
+          # requires track_counts to also be on.
+#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
+          # their durations, > 0 logs only
+          # actions running at least this number
+          # of milliseconds.
+#autovacuum_max_workers = 3   # max number of autovacuum subprocesses
+#autovacuum_naptime = 1min    # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
+          # vacuum
+#autovacuum_analyze_threshold = 50  # min number of row updates before 
+          # analyze
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1  # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000  # maximum XID age before forced vacuum
+          # (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms  # default vacuum cost delay for
+          # autovacuum, in milliseconds;
+          # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1  # default vacuum cost limit for
+          # autovacuum, -1 means use
+          # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public'   # schema names
+#default_tablespace = ''    # a tablespace name, '' uses the default
+#temp_tablespaces = ''      # a list of tablespace names, '' uses
+          # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#session_replication_role = 'origin'
+#statement_timeout = 0      # in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+#timezone = unknown     # actually, defaults to TZ environment
+          # setting
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+          # abbreviations.  Currently, there are
+          #   Default
+          #   Australia
+          #   India
+          # You can create your own file in
+          # share/timezonesets/.
+#extra_float_digits = 0     # min -15, max 2
+#client_encoding = sql_ascii    # actually, defaults to database
+          # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'     # locale for system error message
+          # strings
+lc_monetary = 'en_US.UTF-8'     # locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'      # locale for number formatting
+lc_time = 'en_US.UTF-8'       # locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64   # min 10
+          # (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#add_missing_from = off
+#array_nulls = on
+#backslash_quote = safe_encoding  # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#regex_flavor = advanced    # advanced, extended, or basic
+#sql_inheritance = on
+#standard_conforming_strings = off
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = ''   # list of custom variable class names