aws-sdk 1.8.0 → 1.8.1

data/lib/aws/ec2/tagged_item.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/volume.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/volume_collection.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpc.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpc_collection.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_connection.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_connection/telemetry.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_connection_collection.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_gateway.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_gateway/attachment.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/ec2/vpn_gateway_collection.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/elastic_beanstalk.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/elastic_beanstalk/client.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of
@@ -17,12 +17,10 @@ module AWS
     # Client class for AWS Elastic Beanstalk.
     class Client < Core::QueryClient
 
-      define_client_methods('2010-12-01')
-
       # @private
       CACHEABLE_REQUESTS = Set[]
 
-      ## client methods ##
+      # client methods #
 
       # @!method check_dns_availability(options = {})
       # Calls the CheckDNSAvailability API operation.
@@ -860,7 +858,9 @@ module AWS
       #     * +:namespace+ - (String)
       #     * +:option_name+ - (String)
 
-      ## end client methods ##
+      # end client methods #
+
+      define_client_methods('2010-12-01')
 
     end
   end

data/lib/aws/elastic_beanstalk/config.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/elastic_beanstalk/errors.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/elastic_beanstalk/request.rb

@@ -1,4 +1,4 @@
-# Copyright 2011-2012 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License"). You
 # may not use this file except in compliance with the License. A copy of

data/lib/aws/elastic_transcoder.rb

@@ -0,0 +1,30 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+require 'aws/core'
+require 'aws/glacier/config'
+
+module AWS
+
+  class ElasticTranscoder
+
+    AWS.register_autoloads(self, 'aws/elastic_transcoder') do
+      autoload :Client, 'client'
+      autoload :Errors, 'errors'
+      autoload :Request, 'request'
+    end
+
+    include Core::ServiceInterface
+
+  end
+end

data/lib/aws/elastic_transcoder/client.rb

@@ -0,0 +1,672 @@
+# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"). You
+# may not use this file except in compliance with the License. A copy of
+# the License is located at
+#
+#     http://aws.amazon.com/apache2.0/
+#
+# or in the "license" file accompanying this file. This file is
+# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
+# ANY KIND, either express or implied. See the License for the specific
+# language governing permissions and limitations under the License.
+
+module AWS
+  class ElasticTranscoder
+
+    class Client < Core::RESTJSONClient
+
+      # @private
+      def extract_error_details response
+        if
+          response.http_response.status >= 300 and
+          body = response.http_response.body and
+          json = (::JSON.load(body) rescue nil)
+        then
+          headers = response.http_response.headers
+          code = headers['x-amzn-errortype'].first.split(':')[0]
+          message = json['message'] || json['Message']
+          [code, message]
+        end
+      end
+
+      # @private
+      CACHEABLE_REQUESTS = Set[]
+
+      # client methods #
+
+      # @!method cancel_job(options = {})
+      # Calls the DELETE CancelJob API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the job that you want
+      #   to delete. To get a list of the jobs (including their jobId) that
+      #   have a status of Submitted, use the ListJobsByStatus API action.
+      # @return [Core::Response]
+
+      # @!method create_job(options = {})
+      # Calls the POST CreateJob API operation.
+      # @param [Hash] options
+      # * +:pipeline_id+ - *required* - (String) The Id of the pipeline that
+      #   you want Elastic Transcoder to use for transcoding. The pipeline
+      #   determines several settings, including the Amazon S3 bucket from
+      #   which Elastic Transcoder gets the files to transcode and the bucket
+      #   into which Elastic Transcoder puts the transcoded files.
+      # * +:input+ - *required* - (Hash) A section of the request body that
+      #   provides information about the file that is being transcoded.
+      #   * +:key+ - (String) The name of the file to transcode. Elsewhere in
+      #     the body of the JSON block is the the ID of the pipeline to use for
+      #     processing the job. The InputBucket object in that pipeline tells
+      #     Elastic Transcoder which Amazon S3 bucket to get the file from. If
+      #     the file name includes a prefix, such as cooking/lasagna.mpg,
+      #     include the prefix in the key. If the file isn't in the specified
+      #     bucket, Elastic Transcoder returns an error.
+      #   * +:frame_rate+ - (String) The frame rate of the input file. If you
+      #     want Elastic Transcoder to automatically detect the frame rate of
+      #     the input file, specify auto. If you want to specify the frame rate
+      #     for the input file, enter one of the following values: 10, 15,
+      #     23.97, 24, 25, 29.97, 30, 60 If you specify a value other than
+      #     auto, Elastic Transcoder disables automatic detection of the frame
+      #     rate.
+      #   * +:resolution+ - (String) The resolution, in pixels, of the input
+      #     file. If you want Elastic Transcoder to automatically detect the
+      #     resolution of the input file, specify auto. If you want to specify
+      #     the resolution for the input file, enter values in the format width
+      #     in pixels by height in pixels. If you specify a value other than
+      #     auto, Elastic Transcoder disables automatic detection of the
+      #     resolution.
+      #   * +:aspect_ratio+ - (String) The aspect ratio of the input file. If
+      #     you want Elastic Transcoder to automatically detect the aspect
+      #     ratio of the input file, specify auto. If you want to specify the
+      #     aspect ratio for the output file, enter one of the following
+      #     values: 1:1, 4:3, 3:2, 16:9 If you specify a value other than auto,
+      #     Elastic Transcoder disables automatic detection of the aspect
+      #     ratio.
+      #   * +:interlaced+ - (String) Whether the input file is interlaced. If
+      #     you want Elastic Transcoder to automatically detect whether the
+      #     input file is interlaced, specify auto. If you want to specify
+      #     whether the input file is interlaced, enter one of the following
+      #     values: +true+ , +false+ If you specify a value other than auto,
+      #     Elastic Transcoder disables automatic detection of interlacing.
+      #   * +:container+ - (String) The container type for the input file. If
+      #     you want Elastic Transcoder to automatically detect the container
+      #     type of the input file, specify auto. If you want to specify the
+      #     container type for the input file, enter one of the following
+      #     values: 3gp, asf, avi, divx, flv, mkv, mov, mp4, mpeg, mpeg-ps,
+      #     mpeg-ts, mxf, ogg, vob, wav, webm
+      # * +:output+ - *required* - (Hash) A section of the request body that
+      #   provides information about the transcoded (target) file.
+      #   * +:key+ - (String) The name to assign to the transcoded file.
+      #     Elastic Transcoder saves the file in the Amazon S3 bucket specified
+      #     by the OutputBucket object in the pipeline that is specified by the
+      #     pipeline ID. If a file with the specified name already exists in
+      #     the output bucket, the job fails.
+      #   * +:thumbnail_pattern+ - (String) Whether you want Elastic Transcoder
+      #     to create thumbnails for your videos and, if so, how you want
+      #     Elastic Transcoder to name the files. If you don't want Elastic
+      #     Transcoder to create thumbnails, specify "". If you do want Elastic
+      #     Transcoder to create thumbnails, specify the information that you
+      #     want to include in the file name for each thumbnail. You can
+      #     specify the following values in any sequence: {count} (Required):
+      #     If you want to create thumbnails, you must include {count} in the
+      #     ThumbnailPattern object. Wherever you specify {count}, Elastic
+      #     Transcoder adds a five-digit sequence number (beginning with 00001)
+      #     to thumbnail file names. The number indicates where a given
+      #     thumbnail appears in the sequence of thumbnails for a transcoded
+      #     file. If you specify a literal value and/or {resolution} but you
+      #     omit {count}, Elastic Transcoder returns a validation error and
+      #     does not create the job. Literal values (Optional): You can specify
+      #     literal values anywhere in the ThumbnailPattern object. For
+      #     example, you can include them as a file name prefix or as a
+      #     delimiter between {resolution} and {count}. {resolution}
+      #     (Optional): If you want Elastic Transcoder to include the
+      #     resolution in the file name, include {resolution} in the
+      #     ThumbnailPattern object. When creating thumbnails, Elastic
+      #     Transcoder automatically saves the files in the format (.jpg or
+      #     .png) that appears in the preset that you specified in the PresetID
+      #     value of CreateJobOutput. Elastic Transcoder also appends the
+      #     applicable file name extension.
+      #   * +:rotate+ - (String) The number of degrees clockwise by which you
+      #     want Elastic Transcoder to rotate the output relative to the input.
+      #     Enter one of the following values: auto, 0, 90, 180, 270 The value
+      #     auto generally works only if the file that you're transcoding
+      #     contains rotation metadata.
+      #   * +:preset_id+ - (String) The Id of the preset to use for this job.
+      #     The preset determines the audio, video, and thumbnail settings that
+      #     Elastic Transcoder uses for transcoding.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:job+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:pipeline_id+ - (String)
+      #     * +:input+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #       * +:interlaced+ - (String)
+      #       * +:container+ - (String)
+      #     * +:output+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:thumbnail_pattern+ - (String)
+      #       * +:rotate+ - (String)
+      #       * +:preset_id+ - (String)
+      #       * +:status+ - (String)
+      #       * +:status_detail+ - (String)
+
+      # @!method create_pipeline(options = {})
+      # Calls the POST CreatePipeline API operation.
+      # @param [Hash] options
+      # * +:name+ - *required* - (String) The name of the pipeline. We
+      #   recommend that the name be unique within the AWS account, but
+      #   uniqueness is not enforced. Constraints: Maximum 40 characters.
+      # * +:input_bucket+ - *required* - (String) The Amazon S3 bucket in which
+      #   you saved the media files that you want to transcode.
+      # * +:output_bucket+ - *required* - (String) The Amazon S3 bucket in
+      #   which you want Elastic Transcoder to save the transcoded files.
+      # * +:role+ - *required* - (String) The IAM Amazon Resource Name (ARN)
+      #   for the role that you want Elastic Transcoder to use to create the
+      #   pipeline.
+      # * +:notifications+ - *required* - (Hash) The Amazon Simple Notification
+      #   Service (Amazon SNS) topic that you want to notify to report job
+      #   status. To receive notifications, you must also subscribe to the new
+      #   topic in the Amazon SNS console. Progressing: The Amazon Simple
+      #   Notification Service (Amazon SNS) topic that you want to notify when
+      #   Elastic Transcoder has started to process the job. Completed: The
+      #   Amazon SNS topic that you want to notify when Elastic Transcoder has
+      #   finished processing the job. Warning: The Amazon SNS topic that you
+      #   want to notify when Elastic Transcoder encounters a warning
+      #   condition. Error: The Amazon SNS topic that you want to notify when
+      #   Elastic Transcoder encounters an error condition.
+      #   * +:progressing+ - (String) The Amazon Simple Notification Service
+      #     (Amazon SNS) topic that you want to notify when Elastic Transcoder
+      #     has started to process the job.
+      #   * +:completed+ - (String) The Amazon SNS topic that you want to
+      #     notify when Elastic Transcoder has finished processing the job.
+      #   * +:warning+ - (String) The Amazon SNS topic that you want to notify
+      #     when Elastic Transcoder encounters a warning condition.
+      #   * +:error+ - (String) The Amazon SNS topic that you want to notify
+      #     when Elastic Transcoder encounters an error condition.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:pipeline+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:status+ - (String)
+      #     * +:input_bucket+ - (String)
+      #     * +:output_bucket+ - (String)
+      #     * +:role+ - (String)
+      #     * +:notifications+ - (Hash)
+      #       * +:progressing+ - (String)
+      #       * +:completed+ - (String)
+      #       * +:warning+ - (String)
+      #       * +:error+ - (String)
+
+      # @!method create_preset(options = {})
+      # Calls the POST CreatePreset API operation.
+      # @param [Hash] options
+      # * +:name+ - *required* - (String) The name of the preset. We recommend
+      #   that the name be unique within the AWS account, but uniqueness is not
+      #   enforced.
+      # * +:description+ - (String) A description of the preset.
+      # * +:container+ - *required* - (String) The container type for the
+      #   output file. This value must be mp4.
+      # * +:video+ - *required* - (Hash) A section of the request body that
+      #   specifies the video parameters.
+      #   * +:codec+ - (String) The video codec for the output file. This value
+      #     must be H.264.
+      #   * +:codec_options+ - (Hash) Profile The H.264 profile that you want
+      #     to use for the output file. Elastic Transcoder supports the
+      #     following profiles: baseline: The profile most commonly used for
+      #     videoconferencing and for mobile applications. main: The profile
+      #     used for standard-definition digital TV broadcasts. high: The
+      #     profile used for high-definition digital TV broadcasts and for
+      #     Blu-ray discs. Level The H.264 level that you want to use for the
+      #     output file. Elastic Transcoder supports the following levels: 1,
+      #     1b, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 3, 3.1, 3.2, 4, 4.1
+      #     MaxReferenceFrames The maximum number of previously decoded frames
+      #     to use as a reference for decoding future frames. Valid values are
+      #     integers 0 through 16, but we recommend that you not use a value
+      #     greater than the following: Min(Floor(Maximum decoded picture
+      #     buffer in macroblocks * 256 / (Width in pixels * Height in
+      #     pixels)), 16) where Width in pixels and Height in pixels represent
+      #     the resolution of the output video and Maximum decoded picture
+      #     buffer in macroblocks depends on the value of the Level object. (A
+      #     macroblock is a block of pixels measuring 16x16.) Note that the
+      #     calculation for maximum decoded picture buffer, which is similar to
+      #     the calculation for maximum reference frames, uses macroblocks
+      #     instead of pixels for the width and height of the video. To
+      #     determine the value of maximum decoded picture buffer in
+      #     macroblocks, see the following list (Level - Maximum decoded
+      #     picture buffer): 1 - 396 1b - 396 1.1 - 900 1.2 - 2376 1.3 - 2376 2
+      #     - 2376 2.1 - 4752 2.2 - 8100 3 - 8100 3.1 - 18000 3.2 - 20480 4 -
+      #     32768 4.1 - 32768
+      #   * +:keyframes_max_dist+ - (String) The maximum number of frames
+      #     between key frames. Key frames are fully encoded frames; the frames
+      #     between key frames are encoded based, in part, on the content of
+      #     the key frames. The value is an integer formatted as a string;
+      #     valid values are between 1 and 100000, inclusive. A higher value
+      #     results in higher compression but may also discernibly decrease
+      #     video quality.
+      #   * +:fixed_gop+ - (String) Whether to use a fixed value for FixedGOP.
+      #     Valid values are +true+ and +false+ : +true+ : Elastic Transcoder
+      #     uses the value of KeyframesMaxDist for the distance between key
+      #     frames (the number of frames in a group of pictures, or GOP).
+      #     +false+ : The distance between key frames can vary.
+      #   * +:bit_rate+ - (String) The bit rate of the video stream in the
+      #     output file, in kilobits/second. Valid values depend on the values
+      #     of Level and Profile. We recommend that you specify a value less
+      #     than or equal to the maximum H.264-compliant value listed in the
+      #     following list for your level and profile: Level - Maximum video
+      #     bit rate in kilobits/second (baseline and main Profile) : maximum
+      #     video bit rate in kilobits/second (high Profile) 1 - 64 : 80 1b -
+      #     128 : 160 1.1 - 192 : 240 1.2 - 384 : 480 1.3 - 768 : 960 2 - 2000
+      #     : 2500 3 - 10000 : 12500 3.1 - 14000 : 17500 3.2 - 20000 : 25000 4
+      #     - 20000 : 25000 4.1 - 50000 : 62500
+      #   * +:frame_rate+ - (String) The frames per second for the video stream
+      #     in the output file. Valid values include: auto, 10, 15, 23.97, 24,
+      #     25, 29.97, 30, 60 If you specify auto, Elastic Transcoder uses the
+      #     detected frame rate of the input source. If you specify a frame
+      #     rate, we recommend that you perform the following calculation:
+      #     Frame rate = maximum recommended decoding speed in luma
+      #     samples/second / (width in pixels * height in pixels) where: width
+      #     in pixels and height in pixels represent the Resolution of the
+      #     output video. maximum recommended decoding speed in Luma
+      #     samples/second is less than or equal to the maximum value listed in
+      #     the following table, based on the value that you specified for
+      #     Level. The maximum recommended decoding speed in Luma
+      #     samples/second for each level is described in the following list
+      #     (Level - Decoding speed): 1 - 380160 1b - 380160 1.1 - 76800 1.2 -
+      #     1536000 1.3 - 3041280 2 - 3041280 2.1 - 5068800 2.2 - 5184000 3 -
+      #     10368000 3.1 - 27648000 3.2 - 55296000 4 - 62914560 4.1 - 62914560
+      #   * +:resolution+ - (String) The width and height of the video in the
+      #     output file, in pixels. Valid values are auto and width x height:
+      #     auto: Elastic Transcoder attempts to preserve the width and height
+      #     of the input file, subject to the following rules. width x height:
+      #     The width and height of the output video in pixels. Note the
+      #     following about specifying the width and height: The width must be
+      #     an even integer between 128 and 4096, inclusive. The height must be
+      #     an even integer between 96 and 3072, inclusive. If you specify a
+      #     resolution that is less than the resolution of the input file,
+      #     Elastic Transcoder rescales the output file to the lower
+      #     resolution. If you specify a resolution that is greater than the
+      #     resolution of the input file, Elastic Transcoder rescales the
+      #     output to the higher resolution. We recommend that you specify a
+      #     resolution for which the product of width and height is less than
+      #     or equal to the applicable value in the following list (List - Max
+      #     width x height value): 1 - 25344 1b - 25344 1.1 - 101376 1.2 -
+      #     101376 1.3 - 101376 2 - 101376 2.1 - 202752 2.2 - 404720 3 - 404720
+      #     3.1 - 921600 3.2 - 1310720 4 - 2097152 4.1 - 2097152
+      #   * +:aspect_ratio+ - (String) The display aspect ratio of the video in
+      #     the output file. Valid values include: auto, 1:1, 4:3, 3:2, 16:9 If
+      #     you specify auto, Elastic Transcoder tries to preserve the aspect
+      #     ratio of the input file. If you specify an aspect ratio for the
+      #     output file that differs from aspect ratio of the input file,
+      #     Elastic Transcoder adds pillarboxing (black bars on the sides) or
+      #     letterboxing (black bars on the top and bottom) to maintain the
+      #     aspect ratio of the active region of the video.
+      # * +:audio+ - *required* - (Hash) A section of the request body that
+      #   specifies the audio parameters
+      #   * +:codec+ - (String) The audio codec for the output file. This value
+      #     must be AAC.
+      #   * +:sample_rate+ - (String) The sample rate of the audio stream in
+      #     the output file, in Hertz. Valid values include: auto, 22050,
+      #     32000, 44100, 48000, 96000 If you specify auto, Elastic Transcoder
+      #     automatically detects the sample rate.
+      #   * +:bit_rate+ - (String) The bit rate of the audio stream in the
+      #     output file, in kilobits/second. Enter an integer between 8 and
+      #     320, inclusive.
+      #   * +:channels+ - (String) The number of audio channels in the output
+      #     file. Valid values include: auto, 0, 1, 2 If you specify auto,
+      #     Elastic Transcoder automatically detects the number of channels in
+      #     the input file.
+      # * +:thumbnails+ - *required* - (Hash) A section of the request body
+      #   that specifies the thumbnail parameters, if any.
+      #   * +:format+ - (String) The format of thumbnails, if any. Valid values
+      #     are jpg and png. You specify whether you want Elastic Transcoder to
+      #     create thumbnails when you create a job.
+      #   * +:interval+ - (String) The number of seconds between thumbnails.
+      #     Specify an integer value.
+      #   * +:resolution+ - (String) The width and height of thumbnail files in
+      #     pixels. Specify a value in the format width x height where both
+      #     values are even integers. The values cannot exceed the width and
+      #     height that you specified in the Video:Resolution object.
+      #   * +:aspect_ratio+ - (String) The aspect ratio of thumbnails. Valid
+      #     values include: auto, 1:1, 4:3, 3:2, 16:9 If you specify auto,
+      #     Elastic Transcoder tries to preserve the aspect ratio of the video
+      #     in the output file.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:preset+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:description+ - (String)
+      #     * +:container+ - (String)
+      #     * +:audio+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:sample_rate+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:channels+ - (String)
+      #     * +:video+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:codec_options+ - (Hash<String,String>)
+      #       * +:keyframes_max_dist+ - (String)
+      #       * +:fixed_gop+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:thumbnails+ - (Hash)
+      #       * +:format+ - (String)
+      #       * +:interval+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:type+ - (String)
+      #   * +:warning+ - (String)
+
+      # @!method delete_pipeline(options = {})
+      # Calls the DELETE DeletePipeline API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the pipeline that you
+      #   want to delete.
+      # @return [Core::Response]
+
+      # @!method delete_preset(options = {})
+      # Calls the DELETE DeletePreset API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the preset for which
+      #   you want to get detailed information.
+      # @return [Core::Response]
+
+      # @!method list_jobs_by_pipeline(options = {})
+      # Calls the GET ListJobsByPipeline API operation.
+      # @param [Hash] options
+      # * +:pipeline_id+ - *required* - (String) The ID of the pipeline for
+      #   which you want to get job information.
+      # * +:ascending+ - (String) To list jobs in chronological order by the
+      #   date and time that they were submitted, enter +true+ . To list jobs
+      #   in reverse chronological order, enter +false+ .
+      # * +:page_token+ - (String) When Elastic Transcoder returns more than
+      #   one page of results, use pageToken in subsequent GET requests to get
+      #   each successive page of results.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:jobs+ - (Array<Hash>)
+      #     * +:id+ - (String)
+      #     * +:pipeline_id+ - (String)
+      #     * +:input+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #       * +:interlaced+ - (String)
+      #       * +:container+ - (String)
+      #     * +:output+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:thumbnail_pattern+ - (String)
+      #       * +:rotate+ - (String)
+      #       * +:preset_id+ - (String)
+      #       * +:status+ - (String)
+      #       * +:status_detail+ - (String)
+      #   * +:next_page_token+ - (String)
+
+      # @!method list_jobs_by_status(options = {})
+      # Calls the GET ListJobsByStatus API operation.
+      # @param [Hash] options
+      # * +:status+ - *required* - (String) To get information about all of the
+      #   jobs associated with the current AWS account that have a given
+      #   status, specify the following status: Submitted, Progressing,
+      #   Completed, Canceled, or Error.
+      # * +:ascending+ - (String) To list jobs in chronological order by the
+      #   date and time that they were submitted, enter +true+ . To list jobs
+      #   in reverse chronological order, enter +false+ .
+      # * +:page_token+ - (String) When Elastic Transcoder returns more than
+      #   one page of results, use pageToken in subsequent GET requests to get
+      #   each successive page of results.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:jobs+ - (Array<Hash>)
+      #     * +:id+ - (String)
+      #     * +:pipeline_id+ - (String)
+      #     * +:input+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #       * +:interlaced+ - (String)
+      #       * +:container+ - (String)
+      #     * +:output+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:thumbnail_pattern+ - (String)
+      #       * +:rotate+ - (String)
+      #       * +:preset_id+ - (String)
+      #       * +:status+ - (String)
+      #       * +:status_detail+ - (String)
+      #   * +:next_page_token+ - (String)
+
+      # @!method list_pipelines(options = {})
+      # Calls the GET ListPipelines API operation.
+      # @param [Hash] options
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:pipelines+ - (Array<Hash>)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:status+ - (String)
+      #     * +:input_bucket+ - (String)
+      #     * +:output_bucket+ - (String)
+      #     * +:role+ - (String)
+      #     * +:notifications+ - (Hash)
+      #       * +:progressing+ - (String)
+      #       * +:completed+ - (String)
+      #       * +:warning+ - (String)
+      #       * +:error+ - (String)
+
+      # @!method list_presets(options = {})
+      # Calls the GET ListPresets API operation.
+      # @param [Hash] options
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:presets+ - (Array<Hash>)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:description+ - (String)
+      #     * +:container+ - (String)
+      #     * +:audio+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:sample_rate+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:channels+ - (String)
+      #     * +:video+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:codec_options+ - (Hash<String,String>)
+      #       * +:keyframes_max_dist+ - (String)
+      #       * +:fixed_gop+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:thumbnails+ - (Hash)
+      #       * +:format+ - (String)
+      #       * +:interval+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:type+ - (String)
+
+      # @!method read_job(options = {})
+      # Calls the GET ReadJob API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the job for which you
+      #   want to get detailed information.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:job+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:pipeline_id+ - (String)
+      #     * +:input+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #       * +:interlaced+ - (String)
+      #       * +:container+ - (String)
+      #     * +:output+ - (Hash)
+      #       * +:key+ - (String)
+      #       * +:thumbnail_pattern+ - (String)
+      #       * +:rotate+ - (String)
+      #       * +:preset_id+ - (String)
+      #       * +:status+ - (String)
+      #       * +:status_detail+ - (String)
+
+      # @!method read_pipeline(options = {})
+      # Calls the GET ReadPipeline API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the pipeline to read.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:pipeline+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:status+ - (String)
+      #     * +:input_bucket+ - (String)
+      #     * +:output_bucket+ - (String)
+      #     * +:role+ - (String)
+      #     * +:notifications+ - (Hash)
+      #       * +:progressing+ - (String)
+      #       * +:completed+ - (String)
+      #       * +:warning+ - (String)
+      #       * +:error+ - (String)
+
+      # @!method read_preset(options = {})
+      # Calls the GET ReadPreset API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the preset for which
+      #   you want to get detailed information.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:preset+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:description+ - (String)
+      #     * +:container+ - (String)
+      #     * +:audio+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:sample_rate+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:channels+ - (String)
+      #     * +:video+ - (Hash)
+      #       * +:codec+ - (String)
+      #       * +:codec_options+ - (Hash<String,String>)
+      #       * +:keyframes_max_dist+ - (String)
+      #       * +:fixed_gop+ - (String)
+      #       * +:bit_rate+ - (String)
+      #       * +:frame_rate+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:thumbnails+ - (Hash)
+      #       * +:format+ - (String)
+      #       * +:interval+ - (String)
+      #       * +:resolution+ - (String)
+      #       * +:aspect_ratio+ - (String)
+      #     * +:type+ - (String)
+
+      # @!method test_role(options = {})
+      # Calls the POST TestRole API operation.
+      # @param [Hash] options
+      # * +:role+ - *required* - (String) The IAM Amazon Resource Name (ARN)
+      #   for the role that you want Elastic Transcoder to use to create the
+      #   pipeline.
+      # * +:input_bucket+ - *required* - (String) The Amazon S3 bucket in which
+      #   you saved the media files that you want to transcode.
+      # * +:output_bucket+ - *required* - (String) The Amazon S3 bucket in
+      #   which you want Elastic Transcoder to save the transcoded files.
+      # * +:topics+ - *required* - (Array<String>) The Amazon Simple
+      #   Notification Service (Amazon SNS) topics that you want to notify to
+      #   report job status.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:success+ - (String)
+      #   * +:messages+ - (Array<String>)
+
+      # @!method update_pipeline_notifications(options = {})
+      # Calls the POST UpdatePipelineNotifications API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the pipeline for
+      #   which you want to change notification settings.
+      # * +:notifications+ - *required* - (Hash) The Amazon Simple Notification
+      #   Service (Amazon SNS) topic that you want to notify to report job
+      #   status. To receive notifications, you must also subscribe to the new
+      #   topic in the Amazon SNS console. Progressing: The Amazon Simple
+      #   Notification Service (Amazon SNS) topic that you want to notify when
+      #   Elastic Transcoder has started to process the job. Completed: The
+      #   Amazon SNS topic that you want to notify when Elastic Transcoder has
+      #   finished processing the job. Warning: The Amazon SNS topic that you
+      #   want to notify when Elastic Transcoder encounters a warning
+      #   condition. Error: The Amazon SNS topic that you want to notify when
+      #   Elastic Transcoder encounters an error condition.
+      #   * +:progressing+ - (String) The Amazon Simple Notification Service
+      #     (Amazon SNS) topic that you want to notify when Elastic Transcoder
+      #     has started to process the job.
+      #   * +:completed+ - (String) The Amazon SNS topic that you want to
+      #     notify when Elastic Transcoder has finished processing the job.
+      #   * +:warning+ - (String) The Amazon SNS topic that you want to notify
+      #     when Elastic Transcoder encounters a warning condition.
+      #   * +:error+ - (String) The Amazon SNS topic that you want to notify
+      #     when Elastic Transcoder encounters an error condition.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:pipeline+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:status+ - (String)
+      #     * +:input_bucket+ - (String)
+      #     * +:output_bucket+ - (String)
+      #     * +:role+ - (String)
+      #     * +:notifications+ - (Hash)
+      #       * +:progressing+ - (String)
+      #       * +:completed+ - (String)
+      #       * +:warning+ - (String)
+      #       * +:error+ - (String)
+
+      # @!method update_pipeline_status(options = {})
+      # Calls the POST UpdatePipelineStatus API operation.
+      # @param [Hash] options
+      # * +:id+ - *required* - (String) The identifier of the pipeline to
+      #   update.
+      # * +:status+ - *required* - (String) The new status of the pipeline:
+      #   active: Enable the pipeline, so it starts processing jobs. paused:
+      #   Disable the pipeline, so it stops processing jobs.
+      # @return [Core::Response]
+      #   The #data method of the response object returns
+      #   a hash with the following structure:
+      #   * +:pipeline+ - (Hash)
+      #     * +:id+ - (String)
+      #     * +:name+ - (String)
+      #     * +:status+ - (String)
+      #     * +:input_bucket+ - (String)
+      #     * +:output_bucket+ - (String)
+      #     * +:role+ - (String)
+      #     * +:notifications+ - (Hash)
+      #       * +:progressing+ - (String)
+      #       * +:completed+ - (String)
+      #       * +:warning+ - (String)
+      #       * +:error+ - (String)
+
+      # end client methods #
+
+      define_client_methods('2012-09-25')
+
+    end
+  end
+end