aws-sdk 1.32.0 → 1.67.0

data/lib/aws/data_pipeline/client.rb

@@ -1,36 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-module AWS
-  class DataPipeline
-
-    # Client class for AWS Data Pipeline.
-    class Client < Core::JSONClient
-
-
-      API_VERSION = '2012-10-29'
-
-      signature_version :Version4, 'datapipeline'
-
-      # @api private
-      CACHEABLE_REQUESTS = Set[]
-
-    end
-
-    class Client::V20121029 < Client
-
-      define_client_methods('2012-10-29')
-
-    end
-  end
-end

data/lib/aws/data_pipeline/config.rb

@@ -1,18 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-AWS::Core::Configuration.module_eval do
-
-  add_service 'DataPipeline', 'data_pipeline', 'datapipeline'
-
-end

data/lib/aws/data_pipeline/errors.rb

@@ -1,20 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-module AWS
-  class DataPipeline
-    module Errors
-      extend Core::LazyErrorClasses
-    end
-  end
-end

data/lib/aws/direct_connect.rb

@@ -1,73 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-require 'aws/core'
-require 'aws/direct_connect/config'
-
-module AWS
-
-  # This class is the starting point for working with AWS Import/Export.
-  #
-  # To use AWS Direct Connect you must first
-  # [sign up here](http://aws.amazon.com/directconnect/).
-  #
-  # For more information about AWS AWS Direct Connect:
-  #
-  # * [AWS Direct Connect](http://aws.amazon.com/directconnect/)
-  # * [AWS Direct Connect Documentation](http://aws.amazon.com/documentation/directconnect/)
-  #
-  # # Credentials
-  #
-  # You can setup default credentials for all AWS services via
-  # AWS.config:
-  #
-  #     AWS.config(
-  #       :access_key_id => 'YOUR_ACCESS_KEY_ID',
-  #       :secret_access_key => 'YOUR_SECRET_ACCESS_KEY')
-  #
-  # Or you can set them directly on the AWS::DirectConnect interface:
-  #
-  #     dc = AWS::DirectConnect.new(
-  #       :access_key_id => 'YOUR_ACCESS_KEY_ID',
-  #       :secret_access_key => 'YOUR_SECRET_ACCESS_KEY')
-  #
-  # # Using the Client
-  #
-  # AWS::DirectConnect does not provide higher level abstractions for at
-  # this time.  You can still access all of the API methods using
-  # {AWS::DirectConnect::Client}.  Here is how you access the client and make
-  # a simple request:
-  #
-  #     dc = AWS::DirectConnect.new
-  #
-  #     resp = dc.client.describe_connections
-  #     resp[:connections].each do |connection|
-  #       # ...
-  #     end
-  #
-  # See {Client} for documentation on all of the supported operations.
-  #
-  # @!attribute [r] client
-  #   @return [Client] the low-level DirectConnect client object
-  #
-  class DirectConnect
-
-    autoload :Client, 'aws/direct_connect/client'
-    autoload :Errors, 'aws/direct_connect/errors'
-
-    include Core::ServiceInterface
-
-    endpoint_prefix 'directconnect'
-
-  end
-end

data/lib/aws/direct_connect/client.rb

@@ -1,36 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-module AWS
-  class DirectConnect
-
-    # Client class for AWS Direct Connect.
-    class Client < Core::JSONClient
-
-
-      API_VERSION = '2012-10-25'
-
-      signature_version :Version4, 'directconnect'
-
-      # @api private
-      CACHEABLE_REQUESTS = Set[]
-
-    end
-
-    class Client::V20121025 < Client
-
-      define_client_methods('2012-10-25')
-
-    end
-  end
-end

data/lib/aws/direct_connect/config.rb

@@ -1,18 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-AWS::Core::Configuration.module_eval do
-
-  add_service 'DirectConnect', 'direct_connect', 'directconnect'
-
-end

data/lib/aws/direct_connect/errors.rb

@@ -1,22 +0,0 @@
-
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-module AWS
-  class DirectConnect
-    # @api private
-    module Errors
-      extend Core::LazyErrorClasses
-    end
-  end
-end

data/lib/aws/dynamo_db.rb

@@ -1,214 +0,0 @@
-# Copyright 2011-2013 Amazon.com, Inc. or its affiliates. All Rights Reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"). You
-# may not use this file except in compliance with the License. A copy of
-# the License is located at
-#
-#     http://aws.amazon.com/apache2.0/
-#
-# or in the "license" file accompanying this file. This file is
-# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
-# ANY KIND, either express or implied. See the License for the specific
-# language governing permissions and limitations under the License.
-
-require 'aws/core'
-require 'aws/dynamo_db/config'
-
-module AWS
-
-  # Provides a high-level interface for using DynamoDB.
-  #
-  #     dynamo_db = AWS::DynamoDB.new(
-  #       :access_key_id => '...',
-  #       :secret_access_key => '...')
-  #
-  # # Tables
-  #
-  # Tables contain items, and organize information into discrete
-  # areas. All items in the table have the same primary key
-  # scheme. You designate the attribute name (or names) to use for the
-  # primary key when you create a table, and the table requires each
-  # item in the table to have a unique primary key value. The first
-  # step in writing data to DynamoDB is to create a table and
-  # designate a table name with a primary key.
-  #
-  #     table = dynamo_db.tables.create(
-  #       "MyTable", 10, 5,
-  #       :hash_key => { :id => :string }
-  #     )
-  #     sleep 1 while table.status == :creating
-  #
-  # See {Table} and {TableCollection} for more information on creating
-  # and managing tables.
-  #
-  # # Items and Attributes
-  #
-  # An item is a collection of one or more attributes, where each
-  # attribute has a string name and a string, number, string set or
-  # number set value.
-  #
-  # The identity of an item consists of its hash key value and -- if
-  # the table's schema includes a range key -- its range key value.
-  #
-  #     item = table.items.put(:id => "abc123")
-  #     item.hash_value # => "abc123"
-  #     item.attributes.set(
-  #       :colors => ["red", "blue"],
-  #       :numbers => [12, 24]
-  #     )
-  #
-  # See {Item} and {ItemCollection} for more information on creating
-  # and managing items.  For more information on managing attributes,
-  # see {AttributeCollection}.
-  #
-  # # Examples
-  #
-  #     # create a table (10 read and 5 write capacity units) with the
-  #     # default schema (id string hash key)
-  #     dynamo_db = AWS::DynamoDB.new
-  #     table = dynamo_db.tables.create('my-table', 10, 5)
-  #
-  #     sleep 1 while table.status == :creating
-  #     table.status #=> :active
-  #
-  #     # get an existing table by name and specify its hash key
-  #     table = dynamo_db.tables['another-table']
-  #     table.hash_key = [:id, :number]
-  #
-  #     # add an item
-  #     item = table.items.create('id' => 12345, 'foo' => 'bar')
-  #
-  #     # add attributes to an item
-  #     item.attributes.add 'category' => %w(demo), 'tags' => %w(sample item)
-  #
-  #     # update an item with mixed add, delete, update
-  #     item.attributes.update do |u|
-  #       u.add 'colors' => %w(red)
-  #       u.set 'category' => 'demo-category'
-  #       u.delete 'foo'
-  #     end
-  #
-  #     # delete attributes
-  #     item.attributes.delete 'colors', 'category'
-  #
-  #     # get attributes
-  #     item.attributes.to_h
-  #     #=> {"id"=>#<BigDecimal:10155f5d0,'0.12345E5',9(18)>, "tags"=>#<Set: {"item", "sample"}>}
-  #
-  #     # delete an item and all of its attributes
-  #     item.delete
-  #
-  # @!attribute [r] client
-  #   @return [Client] the low-level DynamoDB client object
-  class DynamoDB
-
-    autoload :AttributeCollection, 'aws/dynamo_db/attribute_collection'
-    autoload :BatchGet, 'aws/dynamo_db/batch_get'
-    autoload :BatchWrite, 'aws/dynamo_db/batch_write'
-    autoload :Binary, 'aws/dynamo_db/binary'
-    autoload :Client, 'aws/dynamo_db/client'
-    autoload :ClientV2, 'aws/dynamo_db/client_v2'
-    autoload :Errors, 'aws/dynamo_db/errors'
-    autoload :Expectations, 'aws/dynamo_db/expectations'
-    autoload :Item, 'aws/dynamo_db/item'
-    autoload :ItemData, 'aws/dynamo_db/item_data'
-    autoload :ItemCollection, 'aws/dynamo_db/item_collection'
-    autoload :Keys, 'aws/dynamo_db/keys'
-    autoload :PrimaryKeyElement, 'aws/dynamo_db/primary_key_element'
-    autoload :Resource, 'aws/dynamo_db/resource'
-    autoload :Table, 'aws/dynamo_db/table'
-    autoload :TableCollection, 'aws/dynamo_db/table_collection'
-    autoload :Types, 'aws/dynamo_db/types'
-
-    include Core::ServiceInterface
-
-    endpoint_prefix 'dynamodb'
-
-
-    def initialize options = {}
-      options = options.dup
-      options[:dynamo_db] ||= {}
-      options[:dynamo_db][:api_version] = '2011-12-05'
-      super(options)
-    end
-
-    # Returns a collection representing all the tables in your account.
-    #
-    # @return [TableCollection]
-    def tables
-      TableCollection.new(:config => config)
-    end
-
-    # Request attributes for items spanning multiple tables.  You configure
-    # you batch get request using a block:
-    #
-    #     attributes = dynamo_db.batch_get do |batch|
-    #       # call methods on batch specify tables, attributes and items
-    #       # ...
-    #     end
-    #
-    # The value returned by #batch_get is an enumerable object that yields
-    # the table name (as a string) and a hash of attributes.  The
-    # enumerable yields once per item received in the batch get.
-    #
-    # ## Configuring the batch
-    #
-    # You can call two methods on the yielded batch object:
-    #
-    #   * {#table}
-    #   * {#items}
-    #
-    # For more information on these methods, see {BatchGet}.
-    #
-    # @yield [String, Hash] Yields the table name as a string and a hash
-    #   of attributes for each item received in the bach get request.
-    #
-    # @return [Enumerable]
-    #
-    def batch_get &block
-      batch = BatchGet.new(:config => config)
-      yield(batch)
-      batch.to_enum(:each)
-    end
-
-    # Yields a batch for writing (put and delete) items across multiple
-    # tables.  You can put and delete items in the same batch.
-    #
-    # @example Putting items across tables
-    #
-    #   # shard data across two tables with batch write
-    #   items = [
-    #     { :id => '123', :color => 'red' },
-    #     { :id => '456', :color => 'blue' },
-    #     { :id => '789', :color => 'green' },
-    #   ]
-    #
-    #   ddb.batch_write do |batch|
-    #     batch.put('table1', items)
-    #     batch.put('table2', items)
-    #   end
-    #
-    # @example Mixing puts and deletes
-    #
-    #   ddb.batch_write do |batch|
-    #     batch.write('table1', :put => [...], :delete => [...])
-    #     batch.write('table2', :put => [...], :delete => [...])
-    #   end
-    #
-    # @yield [BatchWrite]
-    #
-    # @return (see BatchWrite#process!)
-    #
-    # @see BatchWrite
-    # @see BatchWrite#put
-    # @see BatchWrite#delete
-    # @see BatchWrite#write
-    #
-    def batch_write &block
-      batch = BatchWrite.new(:config => config)
-      yield(batch)
-      batch.process!
-    end
-
-  end
-end