aws-sdk-sqs 1.31.0 → 1.36.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: e31718dd2428ff7124ca8160fa0354849057ca4102ee2751e5b10051a7589ef4
-  data.tar.gz: 34b10379db700f2362c896358cce747449eea6e6a0f5823d3dd44d58912d977c
+  metadata.gz: da538afc9f39b478479503b352abe923cada23f8ae72c73d7d33a976bce6b52c
+  data.tar.gz: e4b100fda916c73fc9c97248b413ffefd0596b894af53b69a51798f2d3bbd612
 SHA512:
-  metadata.gz: def13e93bae613c889527803825ee3035eeb594d8aa221bca73b303e55a103ee18ca3b7021dcfbadaf8d9c7f91665653134079da00d2e0a00ba2ee2a57c866ed
-  data.tar.gz: 2c3b38f6f92ac938ab0270ee6a4f4ce33fe5956b167b56d68714975bd52971b87e86b2f290421a0cd891afbe83a0817cd44cae80837e70d71e6405069adea88e
+  metadata.gz: 75306c44e4984feb99c35107f9a7f42cea5ae82eb84276155b5ef977e7aabb2d5324b49ffbada5171fc4cc671ded71efdbb25a168c0829ddc1908222b9117863
+  data.tar.gz: fab557c74859d8c86211189d34bfa2c02276d6ca870d2bb16246a038255c8aa39f4fe72a426701c300c7b49c6f83815dafb7e71d4733cc5d12a5c3ea571156f9

data/lib/aws-sdk-sqs.rb

@@ -7,6 +7,7 @@
 #
 # WARNING ABOUT GENERATED CODE
 
+
 require 'aws-sdk-core'
 require 'aws-sigv4'
 
@@ -49,6 +50,6 @@ require_relative 'aws-sdk-sqs/customizations'
 # @!group service
 module Aws::SQS
 
-  GEM_VERSION = '1.31.0'
+  GEM_VERSION = '1.36.0'
 
 end

data/lib/aws-sdk-sqs/client.rb

@@ -368,8 +368,8 @@ module Aws::SQS
     # `&AttributeName.2=second`
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][4] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][4] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -517,7 +517,7 @@ module Aws::SQS
     #
     # @option params [required, Integer] :visibility_timeout
     #   The new value for the message's visibility timeout (in seconds).
-    #   Values values: `0` to `43200`. Maximum: 12 hours.
+    #   Values range: `0` to `43200`. Maximum: 12 hours.
     #
     # @return [Struct] Returns an empty {Seahorse::Client::Response response}.
     #
@@ -653,8 +653,8 @@ module Aws::SQS
     # `&AttributeName.2=second`
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][3] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][3] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -752,22 +752,22 @@ module Aws::SQS
     #   The following attributes apply only to [FIFO (first-in-first-out)
     #   queues][9]\:
     #
-    #   * `FifoQueue` – Designates a queue as FIFO. Valid values: `true`,
-    #     `false`. If you don't specify the `FifoQueue` attribute, Amazon SQS
-    #     creates a standard queue. You can provide this attribute only during
-    #     queue creation. You can't change it for an existing queue. When you
-    #     set this attribute, you must also provide the `MessageGroupId` for
-    #     your messages explicitly.
+    #   * `FifoQueue` – Designates a queue as FIFO. Valid values are `true`
+    #     and `false`. If you don't specify the `FifoQueue` attribute, Amazon
+    #     SQS creates a standard queue. You can provide this attribute only
+    #     during queue creation. You can't change it for an existing queue.
+    #     When you set this attribute, you must also provide the
+    #     `MessageGroupId` for your messages explicitly.
     #
     #     For more information, see [FIFO Queue Logic][10] in the *Amazon
     #     Simple Queue Service Developer Guide*.
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
-    #     Valid values: `true`, `false`. For more information, see
+    #     Valid values are `true` and `false`. For more information, see
     #     [Exactly-Once Processing][11] in the *Amazon Simple Queue Service
-    #     Developer Guide*.
+    #     Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -795,6 +795,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release and
+    #   is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to messages][12]
+    #   in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue throughput
+    #     quota applies to the entire queue or per message group. Valid values
+    #     are `perQueue` and `perMessageGroupId`. The `perMessageGroupId`
+    #     value is allowed only when the value for `DeduplicationScope` is
+    #     `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][13] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -808,6 +852,8 @@ module Aws::SQS
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic
     #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [13]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #
     # @option params [Hash<String,String>] :tags
     #   Add cost allocation tags to the specified Amazon SQS queue. For an
@@ -833,8 +879,8 @@ module Aws::SQS
     #   `sqs:CreateQueue` and `sqs:TagQueue` permissions.
     #
     #    Cross-account permissions don't apply to this action. For more
-    #   information, see [Grant Cross-Account Permissions to a Role and a User
-    #   Name][3] in the *Amazon Simple Queue Service Developer Guide*.
+    #   information, see [Grant cross-account permissions to a role and a user
+    #   name][3] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #    </note>
     #
@@ -999,8 +1045,8 @@ module Aws::SQS
     # creating a queue with the same name.
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][1] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][1] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -1136,9 +1182,9 @@ module Aws::SQS
     #   The following attributes apply only to [FIFO (first-in-first-out)
     #   queues][7]\:
     #
-    #   * `FifoQueue` – Returns whether the queue is FIFO. For more
-    #     information, see [FIFO Queue Logic][8] in the *Amazon Simple Queue
-    #     Service Developer Guide*.
+    #   * `FifoQueue` – Returns information about whether the queue is FIFO.
+    #     For more information, see [FIFO Queue Logic][8] in the *Amazon
+    #     Simple Queue Service Developer Guide*.
     #
     #     <note markdown="1"> To determine whether a queue is [FIFO][7], you can check whether
     #     `QueueName` ends with the `.fifo` suffix.
@@ -1150,6 +1196,50 @@ module Aws::SQS
     #     [Exactly-Once Processing][9] in the *Amazon Simple Queue Service
     #     Developer Guide*.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release and
+    #   is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to messages][10]
+    #   in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue throughput
+    #     quota applies to the entire queue or per message group. Valid values
+    #     are `perQueue` and `perMessageGroupId`. The `perMessageGroupId`
+    #     value is allowed only when the value for `DeduplicationScope` is
+    #     `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][11] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: http://en.wikipedia.org/wiki/Unix_time
@@ -1161,6 +1251,8 @@ module Aws::SQS
     #   [7]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [8]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #
     # @return [Types::GetQueueAttributesResult] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
@@ -1170,7 +1262,7 @@ module Aws::SQS
     #
     #   resp = client.get_queue_attributes({
     #     queue_url: "String", # required
-    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds
+    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds, DeduplicationScope, FifoThroughputLimit
     #   })
     #
     # @example Response structure
@@ -1237,6 +1329,15 @@ module Aws::SQS
     # Returns a list of your queues that have the `RedrivePolicy` queue
     # attribute configured with a dead-letter queue.
     #
+    # The `ListDeadLetterSourceQueues` methods supports pagination. Set
+    # parameter `MaxResults` in the request to specify the maximum number of
+    # results to be returned in the response. If you do not set
+    # `MaxResults`, the response includes a maximum of 1,000 results. If you
+    # set `MaxResults` and there are additional results to display, the
+    # response includes a value for `NextToken`. Use `NextToken` as a
+    # parameter in your next request to `ListDeadLetterSourceQueues` to
+    # receive the next page of results.
+    #
     # For more information about using dead-letter queues, see [Using Amazon
     # SQS Dead-Letter Queues][1] in the *Amazon Simple Queue Service
     # Developer Guide*.
@@ -1254,7 +1355,9 @@ module Aws::SQS
     #   Pagination token to request the next set of results.
     #
     # @option params [Integer] :max_results
-    #   Maximum number of results to include in the response.
+    #   Maximum number of results to include in the response. Value range is 1
+    #   to 1000. You must set `MaxResults` to receive a value for `NextToken`
+    #   in the response.
     #
     # @return [Types::ListDeadLetterSourceQueuesResult] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
@@ -1291,8 +1394,8 @@ module Aws::SQS
     # *Amazon Simple Queue Service Developer Guide*.
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][2] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][2] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -1328,14 +1431,22 @@ module Aws::SQS
       req.send_request(options)
     end
 
-    # Returns a list of your queues. The maximum number of queues that can
-    # be returned is 1,000. If you specify a value for the optional
-    # `QueueNamePrefix` parameter, only queues with a name that begins with
-    # the specified value are returned.
+    # Returns a list of your queues in the current region. The response
+    # includes a maximum of 1,000 results. If you specify a value for the
+    # optional `QueueNamePrefix` parameter, only queues with a name that
+    # begins with the specified value are returned.
+    #
+    # The `listQueues` methods supports pagination. Set parameter
+    # `MaxResults` in the request to specify the maximum number of results
+    # to be returned in the response. If you do not set `MaxResults`, the
+    # response includes a maximum of 1,000 results. If you set `MaxResults`
+    # and there are additional results to display, the response includes a
+    # value for `NextToken`. Use `NextToken` as a parameter in your next
+    # request to `listQueues` to receive the next page of results.
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][1] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][1] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -1353,7 +1464,9 @@ module Aws::SQS
     #   Pagination token to request the next set of results.
     #
     # @option params [Integer] :max_results
-    #   Maximum number of results to include in the response.
+    #   Maximum number of results to include in the response. Value range is 1
+    #   to 1000. You must set `MaxResults` to receive a value for `NextToken`
+    #   in the response.
     #
     # @return [Types::ListQueuesResult] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
@@ -1646,7 +1759,7 @@ module Aws::SQS
     #
     #   resp = client.receive_message({
     #     queue_url: "String", # required
-    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds
+    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds, DeduplicationScope, FifoThroughputLimit
     #     message_attribute_names: ["MessageAttributeName"],
     #     max_number_of_messages: 1,
     #     visibility_timeout: 1,
@@ -1688,8 +1801,8 @@ module Aws::SQS
     # <note markdown="1"> * Only the owner of a queue can remove permissions from it.
     #
     # * Cross-account permissions don't apply to this action. For more
-    #   information, see [Grant Cross-Account Permissions to a Role and a
-    #   User Name][1] in the *Amazon Simple Queue Service Developer Guide*.
+    #   information, see [Grant cross-account permissions to a role and a
+    #   user name][1] in the *Amazon Simple Queue Service Developer Guide*.
     #
     # * To remove the ability to change queue permissions, you must deny
     #   permission to the `AddPermission`, `RemovePermission`, and
@@ -1749,7 +1862,8 @@ module Aws::SQS
     #   Queue URLs and names are case-sensitive.
     #
     # @option params [required, String] :message_body
-    #   The message to send. The maximum string size is 256 KB.
+    #   The message to send. The minimum size is one character. The maximum
+    #   size is 256 KB.
     #
     #   A message can include only XML, JSON, and unformatted text. The
     #   following Unicode characters are allowed:
@@ -1783,7 +1897,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #
     # @option params [Hash<String,Types::MessageSystemAttributeValue>] :message_system_attributes
     #   The message system attribute to send. Each message system attribute
@@ -2063,8 +2177,8 @@ module Aws::SQS
     #   it can handle new attributes gracefully.
     #
     # * Cross-account permissions don't apply to this action. For more
-    #   information, see [Grant Cross-Account Permissions to a Role and a
-    #   User Name][1] in the *Amazon Simple Queue Service Developer Guide*.
+    #   information, see [Grant cross-account permissions to a role and a
+    #   user name][1] in the *Amazon Simple Queue Service Developer Guide*.
     #
     # * To remove the ability to change queue permissions, you must deny
     #   permission to the `AddPermission`, `RemovePermission`, and
@@ -2159,9 +2273,9 @@ module Aws::SQS
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
     #     For more information, see [Exactly-Once Processing][10] in the
-    #     *Amazon Simple Queue Service Developer Guide*.
+    #     *Amazon Simple Queue Service Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -2189,6 +2303,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release and
+    #   is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to messages][11]
+    #   in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue throughput
+    #     quota applies to the entire queue or per message group. Valid values
+    #     are `perQueue` and `perMessageGroupId`. The `perMessageGroupId`
+    #     value is allowed only when the value for `DeduplicationScope` is
+    #     `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][12] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -2201,6 +2359,8 @@ module Aws::SQS
     #   [8]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #
     # @return [Struct] Returns an empty {Seahorse::Client::Response response}.
     #
@@ -2242,8 +2402,8 @@ module Aws::SQS
     # in the *Amazon Simple Queue Service Developer Guide*.
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][3] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][3] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -2284,8 +2444,8 @@ module Aws::SQS
     # Simple Queue Service Developer Guide*.
     #
     # <note markdown="1"> Cross-account permissions don't apply to this action. For more
-    # information, see [Grant Cross-Account Permissions to a Role and a User
-    # Name][2] in the *Amazon Simple Queue Service Developer Guide*.
+    # information, see [Grant cross-account permissions to a role and a user
+    # name][2] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #  </note>
     #
@@ -2331,7 +2491,7 @@ module Aws::SQS
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-sqs'
-      context[:gem_version] = '1.31.0'
+      context[:gem_version] = '1.36.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-sqs/message.rb

@@ -109,7 +109,7 @@ module Aws::SQS
     #
     #
     #
-    # [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    # [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     # @return [Hash<String,Types::MessageAttributeValue>]
     def message_attributes
       data[:message_attributes]
@@ -155,7 +155,7 @@ module Aws::SQS
     # @param [Hash] options ({})
     # @option options [required, Integer] :visibility_timeout
     #   The new value for the message's visibility timeout (in seconds).
-    #   Values values: `0` to `43200`. Maximum: 12 hours.
+    #   Values range: `0` to `43200`. Maximum: 12 hours.
     # @return [EmptyStructure]
     def change_visibility(options = {})
       options = options.merge(

data/lib/aws-sdk-sqs/queue.rb

@@ -195,7 +195,7 @@ module Aws::SQS
     # @example Request syntax with placeholder values
     #
     #   message = queue.receive_messages({
-    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds
+    #     attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds, DeduplicationScope, FifoThroughputLimit
     #     message_attribute_names: ["MessageAttributeName"],
     #     max_number_of_messages: 1,
     #     visibility_timeout: 1,
@@ -410,7 +410,8 @@ module Aws::SQS
     #   })
     # @param [Hash] options ({})
     # @option options [required, String] :message_body
-    #   The message to send. The maximum string size is 256 KB.
+    #   The message to send. The minimum size is one character. The maximum
+    #   size is 256 KB.
     #
     #   A message can include only XML, JSON, and unformatted text. The
     #   following Unicode characters are allowed:
@@ -442,7 +443,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     # @option options [Hash<String,Types::MessageSystemAttributeValue>] :message_system_attributes
     #   The message system attribute to send. Each message system attribute
     #   consists of a `Name`, `Type`, and `Value`.
@@ -681,9 +682,9 @@ module Aws::SQS
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
     #     For more information, see [Exactly-Once Processing][10] in the
-    #     *Amazon Simple Queue Service Developer Guide*.
+    #     *Amazon Simple Queue Service Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -711,6 +712,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release and
+    #   is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to messages][11]
+    #   in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue throughput
+    #     quota applies to the entire queue or per message group. Valid values
+    #     are `perQueue` and `perMessageGroupId`. The `perMessageGroupId`
+    #     value is allowed only when the value for `DeduplicationScope` is
+    #     `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][12] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -723,6 +768,8 @@ module Aws::SQS
     #   [8]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     # @return [EmptyStructure]
     def set_attributes(options = {})
       options = options.merge(queue_url: @url)

data/lib/aws-sdk-sqs/queue_poller.rb

@@ -290,7 +290,7 @@ module Aws
       # @option options [Integer] :visibility_timeout (nil)
       #   The number of seconds you have to process a message before
       #   it is put back into the queue and can be received again.
-      #   By default, the queue's
+      #   By default, the queue's visibility timeout is not set.
       #
       # @option options [Array<String>] :attribute_names ([])
       #   The list of attributes that need to be returned along with each

data/lib/aws-sdk-sqs/resource.rb

@@ -134,22 +134,22 @@ module Aws::SQS
     #   The following attributes apply only to [FIFO (first-in-first-out)
     #   queues][9]\:
     #
-    #   * `FifoQueue` – Designates a queue as FIFO. Valid values: `true`,
-    #     `false`. If you don't specify the `FifoQueue` attribute, Amazon SQS
-    #     creates a standard queue. You can provide this attribute only during
-    #     queue creation. You can't change it for an existing queue. When you
-    #     set this attribute, you must also provide the `MessageGroupId` for
-    #     your messages explicitly.
+    #   * `FifoQueue` – Designates a queue as FIFO. Valid values are `true`
+    #     and `false`. If you don't specify the `FifoQueue` attribute, Amazon
+    #     SQS creates a standard queue. You can provide this attribute only
+    #     during queue creation. You can't change it for an existing queue.
+    #     When you set this attribute, you must also provide the
+    #     `MessageGroupId` for your messages explicitly.
     #
     #     For more information, see [FIFO Queue Logic][10] in the *Amazon
     #     Simple Queue Service Developer Guide*.
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
-    #     Valid values: `true`, `false`. For more information, see
+    #     Valid values are `true` and `false`. For more information, see
     #     [Exactly-Once Processing][11] in the *Amazon Simple Queue Service
-    #     Developer Guide*.
+    #     Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -177,6 +177,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release and
+    #   is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to messages][12]
+    #   in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue throughput
+    #     quota applies to the entire queue or per message group. Valid values
+    #     are `perQueue` and `perMessageGroupId`. The `perMessageGroupId`
+    #     value is allowed only when the value for `DeduplicationScope` is
+    #     `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][13] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -190,6 +234,8 @@ module Aws::SQS
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic
     #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [13]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     # @option options [Hash<String,String>] :tags
     #   Add cost allocation tags to the specified Amazon SQS queue. For an
     #   overview, see [Tagging Your Amazon SQS Queues][1] in the *Amazon
@@ -214,8 +260,8 @@ module Aws::SQS
     #   `sqs:CreateQueue` and `sqs:TagQueue` permissions.
     #
     #    Cross-account permissions don't apply to this action. For more
-    #   information, see [Grant Cross-Account Permissions to a Role and a User
-    #   Name][3] in the *Amazon Simple Queue Service Developer Guide*.
+    #   information, see [Grant cross-account permissions to a role and a user
+    #   name][3] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #    </note>
     #

data/lib/aws-sdk-sqs/types.rb

@@ -268,7 +268,7 @@ module Aws::SQS
     #
     # @!attribute [rw] visibility_timeout
     #   The new value for the message's visibility timeout (in seconds).
-    #   Values values: `0` to `43200`. Maximum: 12 hours.
+    #   Values range: `0` to `43200`. Maximum: 12 hours.
     #   @return [Integer]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/ChangeMessageVisibilityRequest AWS API Documentation
@@ -385,22 +385,22 @@ module Aws::SQS
     #   The following attributes apply only to [FIFO (first-in-first-out)
     #   queues][9]\:
     #
-    #   * `FifoQueue` – Designates a queue as FIFO. Valid values: `true`,
-    #     `false`. If you don't specify the `FifoQueue` attribute, Amazon
-    #     SQS creates a standard queue. You can provide this attribute only
-    #     during queue creation. You can't change it for an existing queue.
-    #     When you set this attribute, you must also provide the
-    #     `MessageGroupId` for your messages explicitly.
+    #   * `FifoQueue` – Designates a queue as FIFO. Valid values are `true`
+    #     and `false`. If you don't specify the `FifoQueue` attribute,
+    #     Amazon SQS creates a standard queue. You can provide this
+    #     attribute only during queue creation. You can't change it for an
+    #     existing queue. When you set this attribute, you must also provide
+    #     the `MessageGroupId` for your messages explicitly.
     #
     #     For more information, see [FIFO Queue Logic][10] in the *Amazon
     #     Simple Queue Service Developer Guide*.
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
-    #     Valid values: `true`, `false`. For more information, see
+    #     Valid values are `true` and `false`. For more information, see
     #     [Exactly-Once Processing][11] in the *Amazon Simple Queue Service
-    #     Developer Guide*.
+    #     Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -428,6 +428,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release
+    #   and is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to
+    #   messages][12] in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue
+    #     throughput quota applies to the entire queue or per message group.
+    #     Valid values are `perQueue` and `perMessageGroupId`. The
+    #     `perMessageGroupId` value is allowed only when the value for
+    #     `DeduplicationScope` is `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][13] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -441,6 +485,8 @@ module Aws::SQS
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic
     #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [13]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #   @return [Hash<String,String>]
     #
     # @!attribute [rw] tags
@@ -467,8 +513,8 @@ module Aws::SQS
     #   `sqs:CreateQueue` and `sqs:TagQueue` permissions.
     #
     #    Cross-account permissions don't apply to this action. For more
-    #   information, see [Grant Cross-Account Permissions to a Role and a
-    #   User Name][3] in the *Amazon Simple Queue Service Developer Guide*.
+    #   information, see [Grant cross-account permissions to a role and a
+    #   user name][3] in the *Amazon Simple Queue Service Developer Guide*.
     #
     #    </note>
     #
@@ -665,7 +711,7 @@ module Aws::SQS
     #
     #       {
     #         queue_url: "String", # required
-    #         attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds
+    #         attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds, DeduplicationScope, FifoThroughputLimit
     #       }
     #
     # @!attribute [rw] queue_url
@@ -768,9 +814,9 @@ module Aws::SQS
     #   The following attributes apply only to [FIFO (first-in-first-out)
     #   queues][7]\:
     #
-    #   * `FifoQueue` – Returns whether the queue is FIFO. For more
-    #     information, see [FIFO Queue Logic][8] in the *Amazon Simple Queue
-    #     Service Developer Guide*.
+    #   * `FifoQueue` – Returns information about whether the queue is FIFO.
+    #     For more information, see [FIFO Queue Logic][8] in the *Amazon
+    #     Simple Queue Service Developer Guide*.
     #
     #     <note markdown="1"> To determine whether a queue is [FIFO][7], you can check whether
     #     `QueueName` ends with the `.fifo` suffix.
@@ -782,6 +828,50 @@ module Aws::SQS
     #     [Exactly-Once Processing][9] in the *Amazon Simple Queue Service
     #     Developer Guide*.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release
+    #   and is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to
+    #   messages][10] in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue
+    #     throughput quota applies to the entire queue or per message group.
+    #     Valid values are `perQueue` and `perMessageGroupId`. The
+    #     `perMessageGroupId` value is allowed only when the value for
+    #     `DeduplicationScope` is `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][11] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: http://en.wikipedia.org/wiki/Unix_time
@@ -793,6 +883,8 @@ module Aws::SQS
     #   [7]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [8]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-understanding-logic
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #   @return [Array<String>]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/GetQueueAttributesRequest AWS API Documentation
@@ -911,7 +1003,9 @@ module Aws::SQS
     #   @return [String]
     #
     # @!attribute [rw] max_results
-    #   Maximum number of results to include in the response.
+    #   Maximum number of results to include in the response. Value range is
+    #   1 to 1000. You must set `MaxResults` to receive a value for
+    #   `NextToken` in the response.
     #   @return [Integer]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/ListDeadLetterSourceQueuesRequest AWS API Documentation
@@ -932,7 +1026,9 @@ module Aws::SQS
     #   @return [Array<String>]
     #
     # @!attribute [rw] next_token
-    #   Pagination token to include in the next request.
+    #   Pagination token to include in the next request. Token value is
+    #   `null` if there are no additional results to request, or if you did
+    #   not set `MaxResults` in the request.
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/ListDeadLetterSourceQueuesResult AWS API Documentation
@@ -996,7 +1092,9 @@ module Aws::SQS
     #   @return [String]
     #
     # @!attribute [rw] max_results
-    #   Maximum number of results to include in the response.
+    #   Maximum number of results to include in the response. Value range is
+    #   1 to 1000. You must set `MaxResults` to receive a value for
+    #   `NextToken` in the response.
     #   @return [Integer]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/ListQueuesRequest AWS API Documentation
@@ -1017,7 +1115,9 @@ module Aws::SQS
     #   @return [Array<String>]
     #
     # @!attribute [rw] next_token
-    #   Pagination token to include in the next request.
+    #   Pagination token to include in the next request. Token value is
+    #   `null` if there are no additional results to request, or if you did
+    #   not set `MaxResults` in the request.
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/ListQueuesResult AWS API Documentation
@@ -1097,7 +1197,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #   @return [Hash<String,Types::MessageAttributeValue>]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/Message AWS API Documentation
@@ -1167,7 +1267,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/MessageAttributeValue AWS API Documentation
@@ -1239,7 +1339,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/MessageSystemAttributeValue AWS API Documentation
@@ -1325,7 +1425,7 @@ module Aws::SQS
     #
     #       {
     #         queue_url: "String", # required
-    #         attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds
+    #         attribute_names: ["All"], # accepts All, Policy, VisibilityTimeout, MaximumMessageSize, MessageRetentionPeriod, ApproximateNumberOfMessages, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, QueueArn, ApproximateNumberOfMessagesDelayed, DelaySeconds, ReceiveMessageWaitTimeSeconds, RedrivePolicy, FifoQueue, ContentBasedDeduplication, KmsMasterKeyId, KmsDataKeyReusePeriodSeconds, DeduplicationScope, FifoThroughputLimit
     #         message_attribute_names: ["MessageAttributeName"],
     #         max_number_of_messages: 1,
     #         visibility_timeout: 1,
@@ -1681,7 +1781,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #   @return [Hash<String,Types::MessageAttributeValue>]
     #
     # @!attribute [rw] message_system_attributes
@@ -1940,7 +2040,8 @@ module Aws::SQS
     #   @return [String]
     #
     # @!attribute [rw] message_body
-    #   The message to send. The maximum string size is 256 KB.
+    #   The message to send. The minimum size is one character. The maximum
+    #   size is 256 KB.
     #
     #   A message can include only XML, JSON, and unformatted text. The
     #   following Unicode characters are allowed:
@@ -1976,7 +2077,7 @@ module Aws::SQS
     #
     #
     #
-    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-attributes.html
+    #   [1]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes
     #   @return [Hash<String,Types::MessageAttributeValue>]
     #
     # @!attribute [rw] message_system_attributes
@@ -2269,9 +2370,9 @@ module Aws::SQS
     #
     #   * `ContentBasedDeduplication` – Enables content-based deduplication.
     #     For more information, see [Exactly-Once Processing][10] in the
-    #     *Amazon Simple Queue Service Developer Guide*.
+    #     *Amazon Simple Queue Service Developer Guide*. Note the following:
     #
-    #     * Every message must have a unique `MessageDeduplicationId`,
+    #     * Every message must have a unique `MessageDeduplicationId`.
     #
     #       * You may provide a `MessageDeduplicationId` explicitly.
     #
@@ -2299,6 +2400,50 @@ module Aws::SQS
     #       `MessageDeduplicationId`, the two messages are treated as
     #       duplicates and only one copy of the message is delivered.
     #
+    #   **Preview: High throughput for FIFO queues**
+    #
+    #   **High throughput for Amazon SQS FIFO queues is in preview release
+    #   and is subject to change.** This feature provides a high number of
+    #   transactions per second (TPS) for messages in FIFO queues. For
+    #   information on throughput quotas, see [Quotas related to
+    #   messages][11] in the *Amazon Simple Queue Service Developer Guide*.
+    #
+    #   This preview includes two new attributes:
+    #
+    #   * `DeduplicationScope` – Specifies whether message deduplication
+    #     occurs at the message group or queue level. Valid values are
+    #     `messageGroup` and `queue`.
+    #
+    #   * `FifoThroughputLimit` – Specifies whether the FIFO queue
+    #     throughput quota applies to the entire queue or per message group.
+    #     Valid values are `perQueue` and `perMessageGroupId`. The
+    #     `perMessageGroupId` value is allowed only when the value for
+    #     `DeduplicationScope` is `messageGroup`.
+    #
+    #   To enable high throughput for FIFO queues, do the following:
+    #
+    #   * Set `DeduplicationScope` to `messageGroup`.
+    #
+    #   * Set `FifoThroughputLimit` to `perMessageGroupId`.
+    #
+    #   If you set these attributes to anything other than the values shown
+    #   for enabling high throughput, standard throughput is in effect and
+    #   deduplication occurs as specified.
+    #
+    #   This preview is available in the following AWS Regions:
+    #
+    #   * US East (Ohio); us-east-2
+    #
+    #   * US East (N. Virginia); us-east-1
+    #
+    #   * US West (Oregon); us-west-2
+    #
+    #   * Europe (Ireland); eu-west-1
+    #
+    #   For more information about high throughput for FIFO queues, see
+    #   [Preview: High throughput for FIFO queues][12] in the *Amazon Simple
+    #   Queue Service Developer Guide*.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html
@@ -2311,6 +2456,8 @@ module Aws::SQS
     #   [8]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work
     #   [9]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html
     #   [10]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing
+    #   [11]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html
+    #   [12]: https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html
     #   @return [Hash<String,String>]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/sqs-2012-11-05/SetQueueAttributesRequest AWS API Documentation

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-sqs
 version: !ruby/object:Gem::Version
-  version: 1.31.0
+  version: 1.36.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2020-08-25 00:00:00.000000000 Z
+date: 2021-02-02 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core
@@ -19,7 +19,7 @@ dependencies:
         version: '3'
     - - ">="
       - !ruby/object:Gem::Version
-        version: 3.99.0
+        version: 3.112.0
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
@@ -29,7 +29,7 @@ dependencies:
         version: '3'
     - - ">="
       - !ruby/object:Gem::Version
-        version: 3.99.0
+        version: 3.112.0
 - !ruby/object:Gem::Dependency
   name: aws-sigv4
   requirement: !ruby/object:Gem::Requirement