aws-sdk-ses 1.25.0 → 1.26.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 806a7fdd385d806ac061a9f478248197c3d6bf3a
-  data.tar.gz: 342dc1644d3b524724abaea9e53a7b0506b66088
+  metadata.gz: 07a530ef1cc6f02fa32b7a747a83acd0319dc539
+  data.tar.gz: a0bc49a04cf60d0a36c9d30f409ae10ccbb63686
 SHA512:
-  metadata.gz: 828ba1646d252033db697640fa0152e2e246ef3097abd359102e5a6425b12ea617fcfc30a8f9f0bfec6d7c71d5c2ed0ff1628689dfa5b8de79204967273e826e
-  data.tar.gz: ad751063a02d742ae7cc5b4aa8362ca673a2e95b23036e3df056f4958c402d89e6c7564515e96606c816630e110a8aab871b61e8988514aa1b04e408f2b84223
+  metadata.gz: 7d9b39298d6fd70e760dfe6af7b8b694a021fd10cc2114af9ffab08ea708da82f34638ca83ee26c9feefb6b043fab7e2890cab26af2d84a18fd02af840119b38
+  data.tar.gz: 2d66faaaf4f6b44ab256c3ef2af736d8384ee4522a07c5469fcf6ba83b0e22296ff98d2f8cf4414e09be853e44d059cd5365143b59808b5a165e8383efba1a5e

data/lib/aws-sdk-ses.rb

@@ -43,6 +43,6 @@ require_relative 'aws-sdk-ses/customizations'
 # @service
 module Aws::SES
 
-  GEM_VERSION = '1.25.0'
+  GEM_VERSION = '1.26.0'
 
 end

data/lib/aws-sdk-ses/client.rb

@@ -3409,17 +3409,16 @@ module Aws::SES
     #
     #   * `X-SES-RETURN-PATH-ARN`
     #
-    #   Do not include these X-headers in the DKIM signature; Amazon SES
-    #   will remove them before sending the email.
-    #
-    #   For most common sending authorization scenarios, we recommend that
-    #   you specify the `SourceIdentityArn` parameter and not the
-    #   `FromIdentityArn` or `ReturnPathIdentityArn` parameters. If you only
-    #   specify the `SourceIdentityArn` parameter, Amazon SES will set the
-    #   From and Return Path addresses to the identity specified in
-    #   `SourceIdentityArn`. For more information about sending
-    #   authorization, see the [Using Sending Authorization with Amazon
-    #   SES][5] in the *Amazon SES Developer Guide.*
+    #   Don't include these X-headers in the DKIM signature. Amazon SES
+    #   removes these before it sends the email.
+    #
+    #   If you only specify the `SourceIdentityArn` parameter, Amazon SES
+    #   sets the From and Return-Path addresses to the same identity that
+    #   you specified.
+    #
+    #   For more information about sending authorization, see the [Using
+    #   Sending Authorization with Amazon SES][5] in the *Amazon SES
+    #   Developer Guide.*
     #
     # * For every message that you send, the total number of recipients
     #   (including each recipient in the To:, CC: and BCC: fields) is
@@ -3899,19 +3898,21 @@ module Aws::SES
       req.send_request(options)
     end
 
-    # Enables or disables Easy DKIM signing of email sent from an identity:
+    # Enables or disables Easy DKIM signing of email sent from an identity.
+    # If Easy DKIM signing is enabled for a domain, then Amazon SES uses
+    # DKIM to sign all email that it sends from addresses on that domain. If
+    # Easy DKIM signing is enabled for an email address, then Amazon SES
+    # uses DKIM to sign all email it sends from that address.
     #
-    # * If Easy DKIM signing is enabled for a domain name identity (such as
-    #   `example.com`), then Amazon SES will DKIM-sign all email sent by
-    #   addresses under that domain name (for example, `user@example.com`).
+    # <note markdown="1"> For email addresses (for example, `user@example.com`), you can only
+    # enable DKIM signing if the corresponding domain (in this case,
+    # `example.com`) has been set up to use Easy DKIM.
     #
-    # * If Easy DKIM signing is enabled for an email address, then Amazon
-    #   SES will DKIM-sign all email sent by that email address.
+    #  </note>
     #
-    # For email addresses (for example, `user@example.com`), you can only
-    # enable Easy DKIM signing if the corresponding domain (in this case,
-    # `example.com`) has been set up for Easy DKIM using the AWS Console or
-    # the `VerifyDomainDkim` operation.
+    # You can enable DKIM signing for an identity at any time after you
+    # start the verification process for the identity, even if the
+    # verification process isn't complete.
     #
     # You can execute this operation no more than once per second.
     #
@@ -4972,7 +4973,7 @@ module Aws::SES
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-ses'
-      context[:gem_version] = '1.25.0'
+      context[:gem_version] = '1.26.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-ses/types.rb

@@ -1724,15 +1724,15 @@ module Aws::SES
     #       }
     #
     # @!attribute [rw] to_addresses
-    #   The To: field(s) of the message.
+    #   The recipients to place on the To: line of the message.
     #   @return [Array<String>]
     #
     # @!attribute [rw] cc_addresses
-    #   The CC: field(s) of the message.
+    #   The recipients to place on the CC: line of the message.
     #   @return [Array<String>]
     #
     # @!attribute [rw] bcc_addresses
-    #   The BCC: field(s) of the message.
+    #   The recipients to place on the BCC: line of the message.
     #   @return [Array<String>]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/email-2010-12-01/Destination AWS API Documentation
@@ -2795,9 +2795,12 @@ module Aws::SES
     # templates for your account.
     #
     # For more information about custom verification email templates, see
-    # [Using Custom Verification Email
-    # Templates](ses/latest/DeveloperGuide/custom-verification-emails.html)
-    # in the *Amazon SES Developer Guide*.
+    # [Using Custom Verification Email Templates][1] in the *Amazon SES
+    # Developer Guide*.
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/ses/latest/DeveloperGuide/custom-verification-emails.html
     #
     # @note When making an API call, you may pass ListCustomVerificationEmailTemplatesRequest
     #   data as a hash:
@@ -5515,7 +5518,7 @@ module Aws::SES
     #       }
     #
     # @!attribute [rw] scope
-    #   The name of the RuleSet that is being stopped.
+    #   The scope of the StopAction. The only acceptable value is `RuleSet`.
     #   @return [String]
     #
     # @!attribute [rw] topic_arn

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-ses
 version: !ruby/object:Gem::Version
-  version: 1.25.0
+  version: 1.26.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2019-07-25 00:00:00.000000000 Z
+date: 2019-09-11 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core