aws-sdk-s3 1.96.2 → 1.117.2

data/lib/aws-sdk-s3/object_acl.rb

@@ -221,6 +221,7 @@ module Aws::S3
     #       },
     #     },
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     grant_full_control: "GrantFullControl",
     #     grant_read: "GrantRead",
     #     grant_read_acp: "GrantReadACP",
@@ -247,12 +248,28 @@ module Aws::S3
     #   not corrupted in transit. For more information, go to [RFC
     #   1864.>][1]
     #
-    #   For requests made using the AWS Command Line Interface (CLI) or AWS
-    #   SDKs, this field is calculated automatically.
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
     #
     #
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :grant_full_control
     #   Allows grantee the read, write, read ACP, and write ACP permissions on
     #   the bucket.
@@ -278,8 +295,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -289,8 +306,8 @@ module Aws::S3
     #   VersionId used to reference a specific version of the object.
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [Types::PutObjectAclOutput]
     def put(options = {})
       options = options.merge(

data/lib/aws-sdk-s3/object_summary.rb

@@ -55,22 +55,31 @@ module Aws::S3
     # below:
     #
     # * Objects created by the PUT Object, POST Object, or Copy operation,
-    #   or through the AWS Management Console, and are encrypted by SSE-S3
-    #   or plaintext, have ETags that are an MD5 digest of their object
-    #   data.
+    #   or through the Amazon Web Services Management Console, and are
+    #   encrypted by SSE-S3 or plaintext, have ETags that are an MD5 digest
+    #   of their object data.
     #
     # * Objects created by the PUT Object, POST Object, or Copy operation,
-    #   or through the AWS Management Console, and are encrypted by SSE-C or
-    #   SSE-KMS, have ETags that are not an MD5 digest of their object data.
+    #   or through the Amazon Web Services Management Console, and are
+    #   encrypted by SSE-C or SSE-KMS, have ETags that are not an MD5 digest
+    #   of their object data.
     #
     # * If an object is created by either the Multipart Upload or Part Copy
     #   operation, the ETag is not an MD5 digest, regardless of the method
-    #   of encryption.
+    #   of encryption. If an object is larger than 16 MB, the Amazon Web
+    #   Services Management Console will upload or copy that object as a
+    #   Multipart Upload, and therefore the ETag will not be an MD5 digest.
     # @return [String]
     def etag
       data[:etag]
     end
 
+    # The algorithm that was used to create a checksum of the object.
+    # @return [Array<String>]
+    def checksum_algorithm
+      data[:checksum_algorithm]
+    end
+
     # Size in bytes of the object
     # @return [Integer]
     def size
@@ -275,6 +284,7 @@ module Aws::S3
     #   object_summary.copy_from({
     #     acl: "private", # accepts private, public-read, public-read-write, authenticated-read, aws-exec-read, bucket-owner-read, bucket-owner-full-control
     #     cache_control: "CacheControl",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     content_disposition: "ContentDisposition",
     #     content_encoding: "ContentEncoding",
     #     content_language: "ContentLanguage",
@@ -295,7 +305,7 @@ module Aws::S3
     #     metadata_directive: "COPY", # accepts COPY, REPLACE
     #     tagging_directive: "COPY", # accepts COPY, REPLACE
     #     server_side_encryption: "AES256", # accepts AES256, aws:kms
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -321,6 +331,14 @@ module Aws::S3
     #   This action is not supported by Amazon S3 on Outposts.
     # @option options [String] :cache_control
     #   Specifies caching behavior along the request/reply chain.
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm you want Amazon S3 to use to create the
+    #   checksum for the object. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :content_disposition
     #   Specifies presentational information for the object.
     # @option options [String] :content_encoding
@@ -340,8 +358,8 @@ module Aws::S3
     #     of the source bucket and the key of the source object, separated by
     #     a slash (/). For example, to copy the object `reports/january.pdf`
     #     from the bucket `awsexamplebucket`, use
-    #     `awsexamplebucket/reports/january.pdf`. The value must be URL
-    #     encoded.
+    #     `awsexamplebucket/reports/january.pdf`. The value must be
+    #     URL-encoded.
     #
     #   * For objects accessed through access points, specify the Amazon
     #     Resource Name (ARN) of the object as accessed through the access
@@ -354,7 +372,8 @@ module Aws::S3
     #     The value must be URL encoded.
     #
     #     <note markdown="1"> Amazon S3 supports copy operations using access points only when the
-    #     source and destination buckets are in the same AWS Region.
+    #     source and destination buckets are in the same Amazon Web Services
+    #     Region.
     #
     #      </note>
     #
@@ -365,7 +384,7 @@ module Aws::S3
     #     outpost `my-outpost` owned by account `123456789012` in Region
     #     `us-west-2`, use the URL encoding of
     #     `arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf`.
-    #     The value must be URL encoded.
+    #     The value must be URL-encoded.
     #
     #   To copy a specific version of an object, append
     #   `?versionId=<version-id>` to the value (for example,
@@ -445,20 +464,21 @@ module Aws::S3
     #   RFC 1321. Amazon S3 uses this header for a message integrity check to
     #   ensure that the encryption key was transmitted without error.
     # @option options [String] :ssekms_key_id
-    #   Specifies the AWS KMS key ID to use for object encryption. All GET and
-    #   PUT requests for an object protected by AWS KMS will fail if not made
-    #   via SSL or using SigV4. For information about configuring using any of
-    #   the officially supported AWS SDKs and AWS CLI, see [Specifying the
-    #   Signature Version in Request Authentication][1] in the *Amazon S3 User
-    #   Guide*.
+    #   Specifies the Amazon Web Services KMS key ID to use for object
+    #   encryption. All GET and PUT requests for an object protected by Amazon
+    #   Web Services KMS will fail if not made via SSL or using SigV4. For
+    #   information about configuring using any of the officially supported
+    #   Amazon Web Services SDKs and Amazon Web Services CLI, see [Specifying
+    #   the Signature Version in Request Authentication][1] in the *Amazon S3
+    #   User Guide*.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
     # @option options [String] :ssekms_encryption_context
-    #   Specifies the AWS KMS Encryption Context to use for object encryption.
-    #   The value of this header is a base64-encoded UTF-8 string holding JSON
-    #   with the encryption context key-value pairs.
+    #   Specifies the Amazon Web Services KMS Encryption Context to use for
+    #   object encryption. The value of this header is a base64-encoded UTF-8
+    #   string holding JSON with the encryption context key-value pairs.
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using AWS KMS (SSE-KMS).
@@ -481,8 +501,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -498,15 +518,15 @@ module Aws::S3
     #   The date and time when you want the copied object's Object Lock to
     #   expire.
     # @option options [String] :object_lock_legal_hold_status
-    #   Specifies whether you want to apply a Legal Hold to the copied object.
+    #   Specifies whether you want to apply a legal hold to the copied object.
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected destination bucket owner. If the
-    #   destination bucket is owned by a different account, the request will
-    #   fail with an HTTP `403 (Access Denied)` error.
+    #   destination bucket is owned by a different account, the request fails
+    #   with the HTTP status code `403 Forbidden` (access denied).
     # @option options [String] :expected_source_bucket_owner
     #   The account ID of the expected source bucket owner. If the source
-    #   bucket is owned by a different account, the request will fail with an
-    #   HTTP `403 (Access Denied)` error.
+    #   bucket is owned by a different account, the request fails with the
+    #   HTTP status code `403 Forbidden` (access denied).
     # @return [Types::CopyObjectOutput]
     def copy_from(options = {})
       options = options.merge(
@@ -537,8 +557,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -546,11 +566,12 @@ module Aws::S3
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
     # @option options [Boolean] :bypass_governance_retention
     #   Indicates whether S3 Object Lock should bypass Governance-mode
-    #   restrictions to process this operation.
+    #   restrictions to process this operation. To use this header, you must
+    #   have the `s3:BypassGovernanceRetention` permission.
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [Types::DeleteObjectOutput]
     def delete(options = {})
       options = options.merge(
@@ -582,20 +603,21 @@ module Aws::S3
     #     request_payer: "requester", # accepts requester
     #     part_number: 1,
     #     expected_bucket_owner: "AccountId",
+    #     checksum_mode: "ENABLED", # accepts ENABLED
     #   })
     # @param [Hash] options ({})
     # @option options [String] :if_match
     #   Return the object only if its entity tag (ETag) is the same as the one
-    #   specified, otherwise return a 412 (precondition failed).
+    #   specified; otherwise, return a 412 (precondition failed) error.
     # @option options [Time,DateTime,Date,Integer,String] :if_modified_since
     #   Return the object only if it has been modified since the specified
-    #   time, otherwise return a 304 (not modified).
+    #   time; otherwise, return a 304 (not modified) error.
     # @option options [String] :if_none_match
     #   Return the object only if its entity tag (ETag) is different from the
-    #   one specified, otherwise return a 304 (not modified).
+    #   one specified; otherwise, return a 304 (not modified) error.
     # @option options [Time,DateTime,Date,Integer,String] :if_unmodified_since
     #   Return the object only if it has not been modified since the specified
-    #   time, otherwise return a 412 (precondition failed).
+    #   time; otherwise, return a 412 (precondition failed) error.
     # @option options [String] :range
     #   Downloads the specified range bytes of an object. For more information
     #   about the HTTP Range header, see
@@ -639,8 +661,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -653,8 +675,10 @@ module Aws::S3
     #   object.
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
+    # @option options [String] :checksum_mode
+    #   To retrieve the checksum, this mode must be enabled.
     # @return [Types::GetObjectOutput]
     def get(options = {}, &block)
       options = options.merge(
@@ -683,7 +707,7 @@ module Aws::S3
     #       "MetadataKey" => "MetadataValue",
     #     },
     #     server_side_encryption: "AES256", # accepts AES256, aws:kms
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -697,6 +721,7 @@ module Aws::S3
     #     object_lock_retain_until_date: Time.now,
     #     object_lock_legal_hold_status: "ON", # accepts ON, OFF
     #     expected_bucket_owner: "AccountId",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #   })
     # @param [Hash] options ({})
     # @option options [String] :acl
@@ -768,20 +793,21 @@ module Aws::S3
     #   RFC 1321. Amazon S3 uses this header for a message integrity check to
     #   ensure that the encryption key was transmitted without error.
     # @option options [String] :ssekms_key_id
-    #   Specifies the ID of the symmetric customer managed AWS KMS CMK to use
-    #   for object encryption. All GET and PUT requests for an object
-    #   protected by AWS KMS will fail if not made via SSL or using SigV4. For
-    #   information about configuring using any of the officially supported
-    #   AWS SDKs and AWS CLI, see [Specifying the Signature Version in Request
-    #   Authentication][1] in the *Amazon S3 User Guide*.
+    #   Specifies the ID of the symmetric customer managed key to use for
+    #   object encryption. All GET and PUT requests for an object protected by
+    #   Amazon Web Services KMS will fail if not made via SSL or using SigV4.
+    #   For information about configuring using any of the officially
+    #   supported Amazon Web Services SDKs and Amazon Web Services CLI, see
+    #   [Specifying the Signature Version in Request Authentication][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
     # @option options [String] :ssekms_encryption_context
-    #   Specifies the AWS KMS Encryption Context to use for object encryption.
-    #   The value of this header is a base64-encoded UTF-8 string holding JSON
-    #   with the encryption context key-value pairs.
+    #   Specifies the Amazon Web Services KMS Encryption Context to use for
+    #   object encryption. The value of this header is a base64-encoded UTF-8
+    #   string holding JSON with the encryption context key-value pairs.
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using AWS KMS (SSE-KMS).
@@ -793,8 +819,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -809,12 +835,20 @@ module Aws::S3
     # @option options [Time,DateTime,Date,Integer,String] :object_lock_retain_until_date
     #   Specifies the date and time when you want the Object Lock to expire.
     # @option options [String] :object_lock_legal_hold_status
-    #   Specifies whether you want to apply a Legal Hold to the uploaded
+    #   Specifies whether you want to apply a legal hold to the uploaded
     #   object.
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm you want Amazon S3 to use to create the
+    #   checksum for the object. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @return [MultipartUpload]
     def initiate_multipart_upload(options = {})
       options = options.merge(
@@ -842,6 +876,11 @@ module Aws::S3
     #     content_length: 1,
     #     content_md5: "ContentMD5",
     #     content_type: "ContentType",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_crc32: "ChecksumCRC32",
+    #     checksum_crc32c: "ChecksumCRC32C",
+    #     checksum_sha1: "ChecksumSHA1",
+    #     checksum_sha256: "ChecksumSHA256",
     #     expires: Time.now,
     #     grant_full_control: "GrantFullControl",
     #     grant_read: "GrantRead",
@@ -851,7 +890,7 @@ module Aws::S3
     #       "MetadataKey" => "MetadataValue",
     #     },
     #     server_side_encryption: "AES256", # accepts AES256, aws:kms
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -933,6 +972,61 @@ module Aws::S3
     #
     #
     #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_crc32
+    #   This header can be used as a data integrity check to verify that the
+    #   data received is the same data that was originally sent. This header
+    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
+    #   more information, see [Checking object integrity][1] in the *Amazon S3
+    #   User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_crc32c
+    #   This header can be used as a data integrity check to verify that the
+    #   data received is the same data that was originally sent. This header
+    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_sha1
+    #   This header can be used as a data integrity check to verify that the
+    #   data received is the same data that was originally sent. This header
+    #   specifies the base64-encoded, 160-bit SHA-1 digest of the object. For
+    #   more information, see [Checking object integrity][1] in the *Amazon S3
+    #   User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_sha256
+    #   This header can be used as a data integrity check to verify that the
+    #   data received is the same data that was originally sent. This header
+    #   specifies the base64-encoded, 256-bit SHA-256 digest of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [Time,DateTime,Date,Integer,String] :expires
     #   The date and time at which the object is no longer cacheable. For more
     #   information, see
@@ -1014,18 +1108,18 @@ module Aws::S3
     #   ensure that the encryption key was transmitted without error.
     # @option options [String] :ssekms_key_id
     #   If `x-amz-server-side-encryption` is present and has the value of
-    #   `aws:kms`, this header specifies the ID of the AWS Key Management
-    #   Service (AWS KMS) symmetrical customer managed customer master key
-    #   (CMK) that was used for the object. If you specify
+    #   `aws:kms`, this header specifies the ID of the Amazon Web Services Key
+    #   Management Service (Amazon Web Services KMS) symmetrical customer
+    #   managed key that was used for the object. If you specify
     #   `x-amz-server-side-encryption:aws:kms`, but do not provide`
-    #   x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the AWS
-    #   managed CMK in AWS to protect the data. If the KMS key does not exist
-    #   in the same account issuing the command, you must use the full ARN and
-    #   not just the ID.
+    #   x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
+    #   Amazon Web Services managed key to protect the data. If the KMS key
+    #   does not exist in the same account issuing the command, you must use
+    #   the full ARN and not just the ID.
     # @option options [String] :ssekms_encryption_context
-    #   Specifies the AWS KMS Encryption Context to use for object encryption.
-    #   The value of this header is a base64-encoded UTF-8 string holding JSON
-    #   with the encryption context key-value pairs.
+    #   Specifies the Amazon Web Services KMS Encryption Context to use for
+    #   object encryption. The value of this header is a base64-encoded UTF-8
+    #   string holding JSON with the encryption context key-value pairs.
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using AWS KMS (SSE-KMS).
@@ -1037,8 +1131,8 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
@@ -1061,8 +1155,8 @@ module Aws::S3
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock.html
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [Types::PutObjectOutput]
     def put(options = {})
       options = options.merge(
@@ -1154,11 +1248,12 @@ module Aws::S3
     #               value: "MetadataValue",
     #             },
     #           ],
-    #           storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS
+    #           storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR
     #         },
     #       },
     #     },
     #     request_payer: "requester", # accepts requester
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
@@ -1169,17 +1264,32 @@ module Aws::S3
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from requester
-    #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+    #   requests. For information about downloading objects from Requester
+    #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request will fail with an HTTP `403 (Access
-    #   Denied)` error.
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [Types::RestoreObjectOutput]
     def restore_object(options = {})
       options = options.merge(
@@ -1312,6 +1422,7 @@ module Aws::S3
       #     request_payer: "requester", # accepts requester
       #     bypass_governance_retention: false,
       #     expected_bucket_owner: "AccountId",
+      #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
       #   })
       # @param options ({})
       # @option options [String] :mfa
@@ -1322,8 +1433,8 @@ module Aws::S3
       # @option options [String] :request_payer
       #   Confirms that the requester knows that they will be charged for the
       #   request. Bucket owners need not specify this parameter in their
-      #   requests. For information about downloading objects from requester
-      #   pays buckets, see [Downloading Objects in Requestor Pays Buckets][1]
+      #   requests. For information about downloading objects from Requester
+      #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
       #   in the *Amazon S3 User Guide*.
       #
       #
@@ -1331,12 +1442,30 @@ module Aws::S3
       #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
       # @option options [Boolean] :bypass_governance_retention
       #   Specifies whether you want to delete this object even if it has a
-      #   Governance-type Object Lock in place. You must have sufficient
-      #   permissions to perform this operation.
+      #   Governance-type Object Lock in place. To use this header, you must
+      #   have the `s3:BypassGovernanceRetention` permission.
       # @option options [String] :expected_bucket_owner
       #   The account ID of the expected bucket owner. If the bucket is owned by
-      #   a different account, the request will fail with an HTTP `403 (Access
-      #   Denied)` error.
+      #   a different account, the request fails with the HTTP status code `403
+      #   Forbidden` (access denied).
+      # @option options [String] :checksum_algorithm
+      #   Indicates the algorithm used to create the checksum for the object
+      #   when using the SDK. This header will not provide any additional
+      #   functionality if not using the SDK. When sending this header, there
+      #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+      #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+      #   `400 Bad Request`. For more information, see [Checking object
+      #   integrity][1] in the *Amazon S3 User Guide*.
+      #
+      #   If you provide an individual checksum, Amazon S3 ignores any provided
+      #   `ChecksumAlgorithm` parameter.
+      #
+      #   This checksum algorithm must be the same for all parts and it match
+      #   the checksum value supplied in the `CreateMultipartUpload` request.
+      #
+      #
+      #
+      #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
       # @return [void]
       def batch_delete!(options = {})
         batch_enum.each do |batch|