aws-sdk-s3 1.48.0 → 1.114.0

data/lib/aws-sdk-s3/bucket_tagging.rb

@@ -1,11 +1,14 @@
+# frozen_string_literal: true
+
 # WARNING ABOUT GENERATED CODE
 #
 # This file is generated. See the contributing guide for more information:
-# https://github.com/aws/aws-sdk-ruby/blob/master/CONTRIBUTING.md
+# https://github.com/aws/aws-sdk-ruby/blob/version-3/CONTRIBUTING.md
 #
 # WARNING ABOUT GENERATED CODE
 
 module Aws::S3
+
   class BucketTagging
 
     extend Aws::Deprecations
@@ -21,6 +24,7 @@ module Aws::S3
       @bucket_name = extract_bucket_name(args, options)
       @data = options.delete(:data)
       @client = options.delete(:client) || Client.new(options)
+      @waiter_block_warned = false
     end
 
     # @!group Read-Only Attributes
@@ -30,7 +34,7 @@ module Aws::S3
       @bucket_name
     end
 
-    
+    # Contains the tag set.
     # @return [Array<Types::Tag>]
     def tag_set
       data[:tag_set]
@@ -76,7 +80,8 @@ module Aws::S3
     # Waiter polls an API operation until a resource enters a desired
     # state.
     #
-    # @note The waiting operation is performed on a copy. The original resource remains unchanged
+    # @note The waiting operation is performed on a copy. The original resource
+    #   remains unchanged.
     #
     # ## Basic Usage
     #
@@ -89,13 +94,15 @@ module Aws::S3
     #
     # ## Example
     #
-    #     instance.wait_until(max_attempts:10, delay:5) {|instance| instance.state.name == 'running' }
+    #     instance.wait_until(max_attempts:10, delay:5) do |instance|
+    #       instance.state.name == 'running'
+    #     end
     #
     # ## Configuration
     #
     # You can configure the maximum number of polling attempts, and the
-    # delay (in seconds) between each polling attempt. The waiting condition is set
-    # by passing a block to {#wait_until}:
+    # delay (in seconds) between each polling attempt. The waiting condition is
+    # set by passing a block to {#wait_until}:
     #
     #     # poll for ~25 seconds
     #     resource.wait_until(max_attempts:5,delay:5) {|resource|...}
@@ -126,17 +133,16 @@ module Aws::S3
     #       # resource did not enter the desired state in time
     #     end
     #
+    # @yieldparam [Resource] resource to be used in the waiting condition.
     #
-    # @yield param [Resource] resource to be used in the waiting condition
-    #
-    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter terminates
-    #   because the waiter has entered a state that it will not transition
-    #   out of, preventing success.
+    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter
+    #   terminates because the waiter has entered a state that it will not
+    #   transition out of, preventing success.
     #
     #   yet successful.
     #
-    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is encountered
-    #   while polling for a resource that is not expected.
+    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is
+    #   encountered while polling for a resource that is not expected.
     #
     # @raise [NotImplementedError] Raised when the resource does not
     #
@@ -170,8 +176,14 @@ module Aws::S3
 
     # @example Request syntax with placeholder values
     #
-    #   bucket_tagging.delete()
+    #   bucket_tagging.delete({
+    #     expected_bucket_owner: "AccountId",
+    #   })
     # @param [Hash] options ({})
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def delete(options = {})
       options = options.merge(bucket: @bucket_name)
@@ -183,6 +195,7 @@ module Aws::S3
     #
     #   bucket_tagging.put({
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     tagging: { # required
     #       tag_set: [ # required
     #         {
@@ -191,10 +204,42 @@ module Aws::S3
     #         },
     #       ],
     #     },
+    #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
+    #   The base64-encoded 128-bit MD5 digest of the data. You must use this
+    #   header as a message integrity check to verify that the request body
+    #   was not corrupted in transit. For more information, see [RFC 1864][1].
+    #
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
+    #
+    #
+    #
+    #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [required, Types::Tagging] :tagging
+    #   Container for the `TagSet` and `Tag` elements.
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def put(options = {})
       options = options.merge(bucket: @bucket_name)

data/lib/aws-sdk-s3/bucket_versioning.rb

@@ -1,11 +1,14 @@
+# frozen_string_literal: true
+
 # WARNING ABOUT GENERATED CODE
 #
 # This file is generated. See the contributing guide for more information:
-# https://github.com/aws/aws-sdk-ruby/blob/master/CONTRIBUTING.md
+# https://github.com/aws/aws-sdk-ruby/blob/version-3/CONTRIBUTING.md
 #
 # WARNING ABOUT GENERATED CODE
 
 module Aws::S3
+
   class BucketVersioning
 
     extend Aws::Deprecations
@@ -21,6 +24,7 @@ module Aws::S3
       @bucket_name = extract_bucket_name(args, options)
       @data = options.delete(:data)
       @client = options.delete(:client) || Client.new(options)
+      @waiter_block_warned = false
     end
 
     # @!group Read-Only Attributes
@@ -85,7 +89,8 @@ module Aws::S3
     # Waiter polls an API operation until a resource enters a desired
     # state.
     #
-    # @note The waiting operation is performed on a copy. The original resource remains unchanged
+    # @note The waiting operation is performed on a copy. The original resource
+    #   remains unchanged.
     #
     # ## Basic Usage
     #
@@ -98,13 +103,15 @@ module Aws::S3
     #
     # ## Example
     #
-    #     instance.wait_until(max_attempts:10, delay:5) {|instance| instance.state.name == 'running' }
+    #     instance.wait_until(max_attempts:10, delay:5) do |instance|
+    #       instance.state.name == 'running'
+    #     end
     #
     # ## Configuration
     #
     # You can configure the maximum number of polling attempts, and the
-    # delay (in seconds) between each polling attempt. The waiting condition is set
-    # by passing a block to {#wait_until}:
+    # delay (in seconds) between each polling attempt. The waiting condition is
+    # set by passing a block to {#wait_until}:
     #
     #     # poll for ~25 seconds
     #     resource.wait_until(max_attempts:5,delay:5) {|resource|...}
@@ -135,17 +142,16 @@ module Aws::S3
     #       # resource did not enter the desired state in time
     #     end
     #
+    # @yieldparam [Resource] resource to be used in the waiting condition.
     #
-    # @yield param [Resource] resource to be used in the waiting condition
-    #
-    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter terminates
-    #   because the waiter has entered a state that it will not transition
-    #   out of, preventing success.
+    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter
+    #   terminates because the waiter has entered a state that it will not
+    #   transition out of, preventing success.
     #
     #   yet successful.
     #
-    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is encountered
-    #   while polling for a resource that is not expected.
+    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is
+    #   encountered while polling for a resource that is not expected.
     #
     # @raise [NotImplementedError] Raised when the resource does not
     #
@@ -181,13 +187,46 @@ module Aws::S3
     #
     #   bucket_versioning.enable({
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     mfa: "MFA",
+    #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
+    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   this header as a message integrity check to verify that the request
+    #   body was not corrupted in transit. For more information, see [RFC
+    #   1864][1].
+    #
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
+    #
+    #
+    #
+    #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :mfa
     #   The concatenation of the authentication device's serial number, a
     #   space, and the value that is displayed on your authentication device.
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def enable(options = {})
       options = Aws::Util.deep_merge(options,
@@ -204,18 +243,52 @@ module Aws::S3
     #
     #   bucket_versioning.put({
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     mfa: "MFA",
     #     versioning_configuration: { # required
     #       mfa_delete: "Enabled", # accepts Enabled, Disabled
     #       status: "Enabled", # accepts Enabled, Suspended
     #     },
+    #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
+    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   this header as a message integrity check to verify that the request
+    #   body was not corrupted in transit. For more information, see [RFC
+    #   1864][1].
+    #
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
+    #
+    #
+    #
+    #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :mfa
     #   The concatenation of the authentication device's serial number, a
     #   space, and the value that is displayed on your authentication device.
     # @option options [required, Types::VersioningConfiguration] :versioning_configuration
+    #   Container for setting the versioning state.
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def put(options = {})
       options = options.merge(bucket: @bucket_name)
@@ -227,13 +300,46 @@ module Aws::S3
     #
     #   bucket_versioning.suspend({
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     mfa: "MFA",
+    #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
+    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   this header as a message integrity check to verify that the request
+    #   body was not corrupted in transit. For more information, see [RFC
+    #   1864][1].
+    #
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
+    #
+    #
+    #
+    #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :mfa
     #   The concatenation of the authentication device's serial number, a
     #   space, and the value that is displayed on your authentication device.
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def suspend(options = {})
       options = Aws::Util.deep_merge(options,

data/lib/aws-sdk-s3/bucket_website.rb

@@ -1,11 +1,14 @@
+# frozen_string_literal: true
+
 # WARNING ABOUT GENERATED CODE
 #
 # This file is generated. See the contributing guide for more information:
-# https://github.com/aws/aws-sdk-ruby/blob/master/CONTRIBUTING.md
+# https://github.com/aws/aws-sdk-ruby/blob/version-3/CONTRIBUTING.md
 #
 # WARNING ABOUT GENERATED CODE
 
 module Aws::S3
+
   class BucketWebsite
 
     extend Aws::Deprecations
@@ -21,6 +24,7 @@ module Aws::S3
       @bucket_name = extract_bucket_name(args, options)
       @data = options.delete(:data)
       @client = options.delete(:client) || Client.new(options)
+      @waiter_block_warned = false
     end
 
     # @!group Read-Only Attributes
@@ -30,25 +34,29 @@ module Aws::S3
       @bucket_name
     end
 
-    
+    # Specifies the redirect behavior of all requests to a website endpoint
+    # of an Amazon S3 bucket.
     # @return [Types::RedirectAllRequestsTo]
     def redirect_all_requests_to
       data[:redirect_all_requests_to]
     end
 
-    
+    # The name of the index document for the website (for example
+    # `index.html`).
     # @return [Types::IndexDocument]
     def index_document
       data[:index_document]
     end
 
-    
+    # The object key name of the website error document to use for 4XX class
+    # errors.
     # @return [Types::ErrorDocument]
     def error_document
       data[:error_document]
     end
 
-    
+    # Rules that define when a redirect is applied and the redirect
+    # behavior.
     # @return [Array<Types::RoutingRule>]
     def routing_rules
       data[:routing_rules]
@@ -94,7 +102,8 @@ module Aws::S3
     # Waiter polls an API operation until a resource enters a desired
     # state.
     #
-    # @note The waiting operation is performed on a copy. The original resource remains unchanged
+    # @note The waiting operation is performed on a copy. The original resource
+    #   remains unchanged.
     #
     # ## Basic Usage
     #
@@ -107,13 +116,15 @@ module Aws::S3
     #
     # ## Example
     #
-    #     instance.wait_until(max_attempts:10, delay:5) {|instance| instance.state.name == 'running' }
+    #     instance.wait_until(max_attempts:10, delay:5) do |instance|
+    #       instance.state.name == 'running'
+    #     end
     #
     # ## Configuration
     #
     # You can configure the maximum number of polling attempts, and the
-    # delay (in seconds) between each polling attempt. The waiting condition is set
-    # by passing a block to {#wait_until}:
+    # delay (in seconds) between each polling attempt. The waiting condition is
+    # set by passing a block to {#wait_until}:
     #
     #     # poll for ~25 seconds
     #     resource.wait_until(max_attempts:5,delay:5) {|resource|...}
@@ -144,17 +155,16 @@ module Aws::S3
     #       # resource did not enter the desired state in time
     #     end
     #
+    # @yieldparam [Resource] resource to be used in the waiting condition.
     #
-    # @yield param [Resource] resource to be used in the waiting condition
-    #
-    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter terminates
-    #   because the waiter has entered a state that it will not transition
-    #   out of, preventing success.
+    # @raise [Aws::Waiters::Errors::FailureStateError] Raised when the waiter
+    #   terminates because the waiter has entered a state that it will not
+    #   transition out of, preventing success.
     #
     #   yet successful.
     #
-    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is encountered
-    #   while polling for a resource that is not expected.
+    # @raise [Aws::Waiters::Errors::UnexpectedError] Raised when an error is
+    #   encountered while polling for a resource that is not expected.
     #
     # @raise [NotImplementedError] Raised when the resource does not
     #
@@ -188,8 +198,14 @@ module Aws::S3
 
     # @example Request syntax with placeholder values
     #
-    #   bucket_website.delete()
+    #   bucket_website.delete({
+    #     expected_bucket_owner: "AccountId",
+    #   })
     # @param [Hash] options ({})
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def delete(options = {})
       options = options.merge(bucket: @bucket_name)
@@ -201,6 +217,7 @@ module Aws::S3
     #
     #   bucket_website.put({
     #     content_md5: "ContentMD5",
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
     #     website_configuration: { # required
     #       error_document: {
     #         key: "ObjectKey", # required
@@ -228,10 +245,42 @@ module Aws::S3
     #         },
     #       ],
     #     },
+    #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
+    #   The base64-encoded 128-bit MD5 digest of the data. You must use this
+    #   header as a message integrity check to verify that the request body
+    #   was not corrupted in transit. For more information, see [RFC 1864][1].
+    #
+    #   For requests made using the Amazon Web Services Command Line Interface
+    #   (CLI) or Amazon Web Services SDKs, this field is calculated
+    #   automatically.
+    #
+    #
+    #
+    #   [1]: http://www.ietf.org/rfc/rfc1864.txt
+    # @option options [String] :checksum_algorithm
+    #   Indicates the algorithm used to create the checksum for the object
+    #   when using the SDK. This header will not provide any additional
+    #   functionality if not using the SDK. When sending this header, there
+    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
+    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
+    #   `400 Bad Request`. For more information, see [Checking object
+    #   integrity][1] in the *Amazon S3 User Guide*.
+    #
+    #   If you provide an individual checksum, Amazon S3 ignores any provided
+    #   `ChecksumAlgorithm` parameter.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [required, Types::WebsiteConfiguration] :website_configuration
+    #   Container for the request.
+    # @option options [String] :expected_bucket_owner
+    #   The account ID of the expected bucket owner. If the bucket is owned by
+    #   a different account, the request fails with the HTTP status code `403
+    #   Forbidden` (access denied).
     # @return [EmptyStructure]
     def put(options = {})
       options = options.merge(bucket: @bucket_name)