aws-sdk-s3 1.164.0 → 1.182.0

data/lib/aws-sdk-s3/bucket_policy.rb

@@ -207,7 +207,7 @@ module Aws::S3
     #
     #   bucket_policy.put({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     confirm_remove_self_bucket_access: false,
     #     policy: "Policy", # required
     #     expected_bucket_owner: "AccountId",
@@ -224,7 +224,7 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum-algorithm ` or
@@ -234,22 +234,23 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `CRC64NVME`
     #
-    #   * SHA256
+    #   * `SHA1`
+    #
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
     #   If the individual checksum value you provide through
     #   `x-amz-checksum-algorithm ` doesn't match the checksum algorithm you
-    #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 ignores any
-    #   provided `ChecksumAlgorithm` parameter and uses the checksum algorithm
-    #   that matches the provided value in `x-amz-checksum-algorithm `.
+    #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 fails the
+    #   request with a `BadDigest` error.
     #
     #   <note markdown="1"> For directory buckets, when you use Amazon Web Services SDKs, `CRC32`
     #   is the default checksum algorithm that's used for performance.

data/lib/aws-sdk-s3/bucket_request_payment.rb

@@ -182,7 +182,7 @@ module Aws::S3
     #
     #   bucket_request_payment.put({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     request_payment_configuration: { # required
     #       payer: "Requester", # required, accepts Requester, BucketOwner
     #     },
@@ -190,7 +190,7 @@ module Aws::S3
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   The base64-encoded 128-bit MD5 digest of the data. You must use this
+    #   The Base64 encoded 128-bit `MD5` digest of the data. You must use this
     #   header as a message integrity check to verify that the request body
     #   was not corrupted in transit. For more information, see [RFC 1864][1].
     #
@@ -202,7 +202,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`

data/lib/aws-sdk-s3/bucket_tagging.rb

@@ -201,7 +201,7 @@ module Aws::S3
     #
     #   bucket_tagging.put({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     tagging: { # required
     #       tag_set: [ # required
     #         {
@@ -214,7 +214,7 @@ module Aws::S3
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   The base64-encoded 128-bit MD5 digest of the data. You must use this
+    #   The Base64 encoded 128-bit `MD5` digest of the data. You must use this
     #   header as a message integrity check to verify that the request body
     #   was not corrupted in transit. For more information, see [RFC 1864][1].
     #
@@ -226,7 +226,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`

data/lib/aws-sdk-s3/bucket_versioning.rb

@@ -191,13 +191,13 @@ module Aws::S3
     #
     #   bucket_versioning.enable({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     mfa: "MFA",
     #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   >The Base64 encoded 128-bit `MD5` digest of the data. You must use
     #   this header as a message integrity check to verify that the request
     #   body was not corrupted in transit. For more information, see [RFC
     #   1864][1].
@@ -210,7 +210,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`
@@ -249,7 +249,7 @@ module Aws::S3
     #
     #   bucket_versioning.put({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     mfa: "MFA",
     #     versioning_configuration: { # required
     #       mfa_delete: "Enabled", # accepts Enabled, Disabled
@@ -259,7 +259,7 @@ module Aws::S3
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   >The Base64 encoded 128-bit `MD5` digest of the data. You must use
     #   this header as a message integrity check to verify that the request
     #   body was not corrupted in transit. For more information, see [RFC
     #   1864][1].
@@ -272,7 +272,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`
@@ -308,13 +308,13 @@ module Aws::S3
     #
     #   bucket_versioning.suspend({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     mfa: "MFA",
     #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   >The base64-encoded 128-bit MD5 digest of the data. You must use
+    #   >The Base64 encoded 128-bit `MD5` digest of the data. You must use
     #   this header as a message integrity check to verify that the request
     #   body was not corrupted in transit. For more information, see [RFC
     #   1864][1].
@@ -327,7 +327,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`

data/lib/aws-sdk-s3/bucket_website.rb

@@ -223,7 +223,7 @@ module Aws::S3
     #
     #   bucket_website.put({
     #     content_md5: "ContentMD5",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     website_configuration: { # required
     #       error_document: {
     #         key: "ObjectKey", # required
@@ -255,7 +255,7 @@ module Aws::S3
     #   })
     # @param [Hash] options ({})
     # @option options [String] :content_md5
-    #   The base64-encoded 128-bit MD5 digest of the data. You must use this
+    #   The Base64 encoded 128-bit `MD5` digest of the data. You must use this
     #   header as a message integrity check to verify that the request body
     #   was not corrupted in transit. For more information, see [RFC 1864][1].
     #
@@ -267,7 +267,7 @@ module Aws::S3
     #
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
-    #   Indicates the algorithm used to create the checksum for the object
+    #   Indicates the algorithm used to create the checksum for the request
     #   when you use the SDK. This header will not provide any additional
     #   functionality if you don't use the SDK. When you send this header,
     #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`