aws-sdk-s3 1.147.0 → 1.167.0

data/lib/aws-sdk-s3/object.rb

@@ -132,7 +132,7 @@ module Aws::S3
       data[:content_length]
     end
 
-    # The base64-encoded, 32-bit CRC32 checksum of the object. This will
+    # The base64-encoded, 32-bit CRC-32 checksum of the object. This will
     # only be present if it was uploaded with the object. When you use an
     # API operation on an object that was uploaded using multipart uploads,
     # this value may not be a direct checksum value of the full object.
@@ -149,7 +149,7 @@ module Aws::S3
       data[:checksum_crc32]
     end
 
-    # The base64-encoded, 32-bit CRC32C checksum of the object. This will
+    # The base64-encoded, 32-bit CRC-32C checksum of the object. This will
     # only be present if it was uploaded with the object. When you use an
     # API operation on an object that was uploaded using multipart uploads,
     # this value may not be a direct checksum value of the full object.
@@ -288,11 +288,6 @@ module Aws::S3
 
     # The server-side encryption algorithm used when you store this object
     # in Amazon S3 (for example, `AES256`, `aws:kms`, `aws:kms:dsse`).
-    #
-    # <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    # managed keys (SSE-S3) (`AES256`) is supported.
-    #
-    #  </note>
     # @return [String]
     def server_side_encryption
       data[:server_side_encryption]
@@ -329,13 +324,8 @@ module Aws::S3
       data[:sse_customer_key_md5]
     end
 
-    # If present, indicates the ID of the Key Management Service (KMS)
-    # symmetric encryption customer managed key that was used for the
-    # object.
-    #
-    # <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #  </note>
+    # If present, indicates the ID of the KMS key that was used for object
+    # encryption.
     # @return [String]
     def ssekms_key_id
       data[:ssekms_key_id]
@@ -343,10 +333,6 @@ module Aws::S3
 
     # Indicates whether the object uses an S3 Bucket Key for server-side
     # encryption with Key Management Service (KMS) keys (SSE-KMS).
-    #
-    # <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #  </note>
     # @return [Boolean]
     def bucket_key_enabled
       data[:bucket_key_enabled]
@@ -500,7 +486,7 @@ module Aws::S3
     #
     # @return [self]
     def load
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.head_object(
         bucket: @bucket_name,
         key: @key
@@ -550,7 +536,7 @@ module Aws::S3
       options, params = separate_params_and_options(options)
       waiter = Waiters::ObjectExists.new(options)
       yield_waiter_and_warn(waiter, &block) if block_given?
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         waiter.wait(params.merge(bucket: @bucket_name,
         key: @key))
       end
@@ -571,7 +557,7 @@ module Aws::S3
       options, params = separate_params_and_options(options)
       waiter = Waiters::ObjectNotExists.new(options)
       yield_waiter_and_warn(waiter, &block) if block_given?
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         waiter.wait(params.merge(bucket: @bucket_name,
         key: @key))
       end
@@ -676,7 +662,7 @@ module Aws::S3
           :retry
         end
       end
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         Aws::Waiters::Waiter.new(options).wait({})
       end
     end
@@ -1031,9 +1017,8 @@ module Aws::S3
     #    </note>
     # @option options [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing this object in
-    #   Amazon S3 (for example, `AES256`, `aws:kms`, `aws:kms:dsse`).
-    #   Unrecognized or unsupported values won’t write a destination object
-    #   and will receive a `400 Bad Request` response.
+    #   Amazon S3. Unrecognized or unsupported values won’t write a
+    #   destination object and will receive a `400 Bad Request` response.
     #
     #   Amazon S3 automatically encrypts all new objects that are copied to an
     #   S3 bucket. When copying an object, if you don't specify encryption
@@ -1041,35 +1026,72 @@ module Aws::S3
     #   object is set to the default encryption configuration of the
     #   destination bucket. By default, all buckets have a base level of
     #   encryption configuration that uses server-side encryption with Amazon
-    #   S3 managed keys (SSE-S3). If the destination bucket has a default
-    #   encryption configuration that uses server-side encryption with Key
-    #   Management Service (KMS) keys (SSE-KMS), dual-layer server-side
-    #   encryption with Amazon Web Services KMS keys (DSSE-KMS), or
-    #   server-side encryption with customer-provided encryption keys (SSE-C),
-    #   Amazon S3 uses the corresponding KMS key, or a customer-provided key
-    #   to encrypt the target object copy.
-    #
-    #   When you perform a `CopyObject` operation, if you want to use a
-    #   different type of encryption setting for the target object, you can
-    #   specify appropriate encryption-related headers to encrypt the target
-    #   object with an Amazon S3 managed key, a KMS key, or a
-    #   customer-provided key. If the encryption setting in your request is
-    #   different from the default encryption configuration of the destination
-    #   bucket, the encryption setting in your request takes precedence.
+    #   S3 managed keys (SSE-S3). If the destination bucket has a different
+    #   default encryption configuration, Amazon S3 uses the corresponding
+    #   encryption key to encrypt the target object copy.
     #
     #   With server-side encryption, Amazon S3 encrypts your data as it writes
     #   your data to disks in its data centers and decrypts the data when you
     #   access it. For more information about server-side encryption, see
     #   [Using Server-Side Encryption][1] in the *Amazon S3 User Guide*.
     #
-    #   <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    #   managed keys (SSE-S3) (`AES256`) is supported.
-    #
-    #    </note>
+    #   <b>General purpose buckets </b>
+    #
+    #   * For general purpose buckets, there are the following supported
+    #     options for server-side encryption: server-side encryption with Key
+    #     Management Service (KMS) keys (SSE-KMS), dual-layer server-side
+    #     encryption with Amazon Web Services KMS keys (DSSE-KMS), and
+    #     server-side encryption with customer-provided encryption keys
+    #     (SSE-C). Amazon S3 uses the corresponding KMS key, or a
+    #     customer-provided key to encrypt the target object copy.
+    #
+    #   * When you perform a `CopyObject` operation, if you want to use a
+    #     different type of encryption setting for the target object, you can
+    #     specify appropriate encryption-related headers to encrypt the target
+    #     object with an Amazon S3 managed key, a KMS key, or a
+    #     customer-provided key. If the encryption setting in your request is
+    #     different from the default encryption configuration of the
+    #     destination bucket, the encryption setting in your request takes
+    #     precedence.
+    #
+    #   <b>Directory buckets </b>
+    #
+    #   * For directory buckets, there are only two supported options for
+    #     server-side encryption: server-side encryption with Amazon S3
+    #     managed keys (SSE-S3) (`AES256`) and server-side encryption with KMS
+    #     keys (SSE-KMS) (`aws:kms`). We recommend that the bucket's default
+    #     encryption uses the desired encryption configuration and you don't
+    #     override the bucket default encryption in your `CreateSession`
+    #     requests or `PUT` object requests. Then, new objects are
+    #     automatically encrypted with the desired encryption settings. For
+    #     more information, see [Protecting data with server-side
+    #     encryption][2] in the *Amazon S3 User Guide*. For more information
+    #     about the encryption overriding behaviors in directory buckets, see
+    #     [Specifying server-side encryption with KMS for new object
+    #     uploads][3].
+    #
+    #   * To encrypt new object copies to a directory bucket with SSE-KMS, we
+    #     recommend you specify SSE-KMS as the directory bucket's default
+    #     encryption configuration with a KMS key (specifically, a [customer
+    #     managed key][4]). [Amazon Web Services managed key][5] (`aws/s3`)
+    #     isn't supported. Your SSE-KMS configuration can only support 1
+    #     [customer managed key][4] per directory bucket for the lifetime of
+    #     the bucket. After you specify a customer managed key for SSE-KMS,
+    #     you can't override the customer managed key for the bucket's
+    #     SSE-KMS configuration. Then, when you perform a `CopyObject`
+    #     operation and want to specify server-side encryption settings for
+    #     new object copies with SSE-KMS in the encryption-related request
+    #     headers, you must ensure the encryption key is the same customer
+    #     managed key that you specified for the directory bucket's default
+    #     encryption configuration.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [4]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [5]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :storage_class
     #   If the `x-amz-storage-class` header is not used, the copied object
     #   will be stored in the `STANDARD` Storage Class by default. The
@@ -1160,32 +1182,50 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   Specifies the KMS ID (Key ID, Key ARN, or Key Alias) to use for object
-    #   encryption. All GET and PUT requests for an object protected by KMS
-    #   will fail if they're not made via SSL or using SigV4. For information
-    #   about configuring any of the officially supported Amazon Web Services
-    #   SDKs and Amazon Web Services CLI, see [Specifying the Signature
-    #   Version in Request Authentication][1] in the *Amazon S3 User Guide*.
-    #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
-    #
-    #    </note>
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. All GET and PUT requests for an object protected by
+    #   KMS will fail if they're not made via SSL or using SigV4. For
+    #   information about configuring any of the officially supported Amazon
+    #   Web Services SDKs and Amazon Web Services CLI, see [Specifying the
+    #   Signature Version in Request Authentication][1] in the *Amazon S3 User
+    #   Guide*.
+    #
+    #   **Directory buckets** - If you specify `x-amz-server-side-encryption`
+    #   with `aws:kms`, you must specify the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header with the ID (Key
+    #   ID or Key ARN) of the KMS symmetric encryption customer managed key to
+    #   use. Otherwise, you get an HTTP `400 Bad Request` error. Only use the
+    #   key ID or key ARN. The key alias format of the KMS key isn't
+    #   supported. Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][2] per directory bucket for the lifetime of the bucket.
+    #   [Amazon Web Services managed key][3] (`aws/s3`) isn't supported.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [3]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :ssekms_encryption_context
-    #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs. This
-    #   value must be explicitly added to specify encryption context for
-    #   `CopyObject` requests.
+    #   Specifies the Amazon Web Services KMS Encryption Context as an
+    #   additional encryption context to use for the destination object
+    #   encryption. The value of this header is a base64-encoded UTF-8 string
+    #   holding JSON with the encryption context key-value pairs.
     #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
+    #   **General purpose buckets** - This value must be explicitly added to
+    #   specify encryption context for `CopyObject` requests if you want an
+    #   additional encryption context for your destination object. The
+    #   additional encryption context of the source object won't be copied to
+    #   the destination object. For more information, see [Encryption
+    #   context][1] in the *Amazon S3 User Guide*.
     #
-    #    </note>
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html#encryption-context
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
@@ -1199,14 +1239,19 @@ module Aws::S3
     #   For more information, see [Amazon S3 Bucket Keys][1] in the *Amazon S3
     #   User Guide*.
     #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
+    #   <note markdown="1"> **Directory buckets** - S3 Bucket Keys aren't supported, when you
+    #   copy SSE-KMS encrypted objects from general purpose buckets to
+    #   directory buckets, from directory buckets to general purpose buckets,
+    #   or between directory buckets, through [CopyObject][2]. In this case,
+    #   Amazon S3 makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
     #    </note>
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-key.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
     # @option options [String] :copy_source_sse_customer_algorithm
     #   Specifies the algorithm to use when decrypting the source object (for
     #   example, `AES256`).
@@ -1346,7 +1391,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.copy_object(options)
       end
       resp.data
@@ -1412,7 +1457,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.delete_object(options)
       end
       resp.data
@@ -1662,13 +1707,22 @@ module Aws::S3
     #   fails with the HTTP status code `403 Forbidden` (access denied).
     # @option options [String] :checksum_mode
     #   To retrieve the checksum, this mode must be enabled.
+    #
+    #   **General purpose buckets** - In addition, if you enable checksum mode
+    #   and the object is uploaded with a [checksum][1] and encrypted with an
+    #   Key Management Service (KMS) key, you must have permission to use the
+    #   `kms:Decrypt` action to retrieve the checksum.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_Checksum.html
     # @return [Types::GetObjectOutput]
     def get(options = {}, &block)
       options = options.merge(
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.get_object(options, &block)
       end
       resp.data
@@ -2010,10 +2064,52 @@ module Aws::S3
     #   The server-side encryption algorithm used when you store this object
     #   in Amazon S3 (for example, `AES256`, `aws:kms`).
     #
-    #   <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    #   managed keys (SSE-S3) (`AES256`) is supported.
+    #   * <b>Directory buckets </b> - For directory buckets, there are only
+    #     two supported options for server-side encryption: server-side
+    #     encryption with Amazon S3 managed keys (SSE-S3) (`AES256`) and
+    #     server-side encryption with KMS keys (SSE-KMS) (`aws:kms`). We
+    #     recommend that the bucket's default encryption uses the desired
+    #     encryption configuration and you don't override the bucket default
+    #     encryption in your `CreateSession` requests or `PUT` object
+    #     requests. Then, new objects are automatically encrypted with the
+    #     desired encryption settings. For more information, see [Protecting
+    #     data with server-side encryption][1] in the *Amazon S3 User Guide*.
+    #     For more information about the encryption overriding behaviors in
+    #     directory buckets, see [Specifying server-side encryption with KMS
+    #     for new object uploads][2].
+    #
+    #     In the Zonal endpoint API calls (except [CopyObject][3] and
+    #     [UploadPartCopy][4]) using the REST API, the encryption request
+    #     headers must match the encryption settings that are specified in the
+    #     `CreateSession` request. You can't override the values of the
+    #     encryption settings (`x-amz-server-side-encryption`,
+    #     `x-amz-server-side-encryption-aws-kms-key-id`,
+    #     `x-amz-server-side-encryption-context`, and
+    #     `x-amz-server-side-encryption-bucket-key-enabled`) that are
+    #     specified in the `CreateSession` request. You don't need to
+    #     explicitly specify these encryption settings values in Zonal
+    #     endpoint API calls, and Amazon S3 will use the encryption settings
+    #     values from the `CreateSession` request to protect new objects in
+    #     the directory bucket.
+    #
+    #     <note markdown="1"> When you use the CLI or the Amazon Web Services SDKs, for
+    #     `CreateSession`, the session token refreshes automatically to avoid
+    #     service interruptions when a session expires. The CLI or the Amazon
+    #     Web Services SDKs use the bucket's default encryption configuration
+    #     for the `CreateSession` request. It's not supported to override the
+    #     encryption settings values in the `CreateSession` request. So in the
+    #     Zonal endpoint API calls (except [CopyObject][3] and
+    #     [UploadPartCopy][4]), the encryption request headers must match the
+    #     default encryption configuration of the directory bucket.
     #
-    #    </note>
+    #      </note>
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
     # @option options [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
     #   created objects. The STANDARD storage class provides high durability
@@ -2066,32 +2162,69 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric
-    #   encryption customer managed key to use for object encryption.
-    #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #    </note>
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. If the KMS key doesn't exist in the same account
+    #   that's issuing the command, you must use the full Key ARN not the Key
+    #   ID.
+    #
+    #   **General purpose buckets** - If you specify
+    #   `x-amz-server-side-encryption` with `aws:kms` or `aws:kms:dsse`, this
+    #   header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key
+    #   to use. If you specify `x-amz-server-side-encryption:aws:kms` or
+    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide
+    #   `x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
+    #   Amazon Web Services managed key (`aws/s3`) to protect the data.
+    #
+    #   **Directory buckets** - If you specify `x-amz-server-side-encryption`
+    #   with `aws:kms`, you must specify the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header with the ID (Key
+    #   ID or Key ARN) of the KMS symmetric encryption customer managed key to
+    #   use. Otherwise, you get an HTTP `400 Bad Request` error. Only use the
+    #   key ID or key ARN. The key alias format of the KMS key isn't
+    #   supported. Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][1] per directory bucket for the lifetime of the bucket.
+    #   [Amazon Web Services managed key][2] (`aws/s3`) isn't supported.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :ssekms_encryption_context
     #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs.
-    #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #    </note>
+    #   object encryption. The value of this header is a Base64-encoded string
+    #   of a UTF-8 encoded JSON, which contains the encryption context as
+    #   key-value pairs.
+    #
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
-    #   (KMS) keys (SSE-KMS). Setting this header to `true` causes Amazon S3
-    #   to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   (KMS) keys (SSE-KMS).
     #
-    #   Specifying this header with an object action doesn’t affect
+    #   **General purpose buckets** - Setting this header to `true` causes
+    #   Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   Also, specifying this header with a PUT action doesn't affect
     #   bucket-level settings for S3 Bucket Key.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #   **Directory buckets** - S3 Bucket Keys are always enabled for `GET`
+    #   and `PUT` operations in a directory bucket and can’t be disabled. S3
+    #   Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects
+    #   from general purpose buckets to directory buckets, from directory
+    #   buckets to general purpose buckets, or between directory buckets,
+    #   through [CopyObject][1], [UploadPartCopy][2], [the Copy operation in
+    #   Batch Operations][3], or [the import jobs][4]. In this case, Amazon S3
+    #   makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
-    #    </note>
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-buckets-objects-Batch-Ops
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/create-import-job
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
@@ -2153,7 +2286,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.create_multipart_upload(options)
       end
       MultipartUpload.new(
@@ -2182,6 +2315,7 @@ module Aws::S3
     #     checksum_sha1: "ChecksumSHA1",
     #     checksum_sha256: "ChecksumSHA256",
     #     expires: Time.now,
+    #     if_none_match: "IfNoneMatch",
     #     grant_full_control: "GrantFullControl",
     #     grant_read: "GrantRead",
     #     grant_read_acp: "GrantReadACP",
@@ -2323,13 +2457,13 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `SHA1`
     #
-    #   * SHA256
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
@@ -2351,9 +2485,9 @@ module Aws::S3
     # @option options [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
-    #   more information, see [Checking object integrity][1] in the *Amazon S3
-    #   User Guide*.
+    #   specifies the base64-encoded, 32-bit CRC-32 checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
@@ -2361,7 +2495,7 @@ module Aws::S3
     # @option options [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the base64-encoded, 32-bit CRC-32C checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -2396,6 +2530,24 @@ module Aws::S3
     #
     #
     #   [1]: https://www.rfc-editor.org/rfc/rfc7234#section-5.3
+    # @option options [String] :if_none_match
+    #   Uploads the object only if the object key name does not already exist
+    #   in the bucket specified. Otherwise, Amazon S3 returns a `412
+    #   Precondition Failed` error.
+    #
+    #   If a conflicting operation occurs during the upload S3 returns a `409
+    #   ConditionalRequestConflict` response. On a 409 failure you should
+    #   retry the upload.
+    #
+    #   Expects the '*' (asterisk) character.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1], or
+    #   [Conditional requests][2] in the *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/conditional-requests.html
     # @option options [String] :grant_full_control
     #   Gives the grantee READ, READ\_ACP, and WRITE\_ACP permissions on the
     #   object.
@@ -2436,25 +2588,65 @@ module Aws::S3
     #   object in Amazon S3 (for example, `AES256`, `aws:kms`,
     #   `aws:kms:dsse`).
     #
-    #   <b>General purpose buckets </b> - You have four mutually exclusive
-    #   options to protect data using server-side encryption in Amazon S3,
-    #   depending on how you choose to manage the encryption keys.
-    #   Specifically, the encryption key options are Amazon S3 managed keys
-    #   (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and
-    #   customer-provided keys (SSE-C). Amazon S3 encrypts data with
-    #   server-side encryption by using Amazon S3 managed keys (SSE-S3) by
-    #   default. You can optionally tell Amazon S3 to encrypt data at rest by
-    #   using server-side encryption with other key options. For more
-    #   information, see [Using Server-Side Encryption][1] in the *Amazon S3
-    #   User Guide*.
+    #   * <b>General purpose buckets </b> - You have four mutually exclusive
+    #     options to protect data using server-side encryption in Amazon S3,
+    #     depending on how you choose to manage the encryption keys.
+    #     Specifically, the encryption key options are Amazon S3 managed keys
+    #     (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and
+    #     customer-provided keys (SSE-C). Amazon S3 encrypts data with
+    #     server-side encryption by using Amazon S3 managed keys (SSE-S3) by
+    #     default. You can optionally tell Amazon S3 to encrypt data at rest
+    #     by using server-side encryption with other key options. For more
+    #     information, see [Using Server-Side Encryption][1] in the *Amazon S3
+    #     User Guide*.
+    #
+    #   * <b>Directory buckets </b> - For directory buckets, there are only
+    #     two supported options for server-side encryption: server-side
+    #     encryption with Amazon S3 managed keys (SSE-S3) (`AES256`) and
+    #     server-side encryption with KMS keys (SSE-KMS) (`aws:kms`). We
+    #     recommend that the bucket's default encryption uses the desired
+    #     encryption configuration and you don't override the bucket default
+    #     encryption in your `CreateSession` requests or `PUT` object
+    #     requests. Then, new objects are automatically encrypted with the
+    #     desired encryption settings. For more information, see [Protecting
+    #     data with server-side encryption][2] in the *Amazon S3 User Guide*.
+    #     For more information about the encryption overriding behaviors in
+    #     directory buckets, see [Specifying server-side encryption with KMS
+    #     for new object uploads][3].
+    #
+    #     In the Zonal endpoint API calls (except [CopyObject][4] and
+    #     [UploadPartCopy][5]) using the REST API, the encryption request
+    #     headers must match the encryption settings that are specified in the
+    #     `CreateSession` request. You can't override the values of the
+    #     encryption settings (`x-amz-server-side-encryption`,
+    #     `x-amz-server-side-encryption-aws-kms-key-id`,
+    #     `x-amz-server-side-encryption-context`, and
+    #     `x-amz-server-side-encryption-bucket-key-enabled`) that are
+    #     specified in the `CreateSession` request. You don't need to
+    #     explicitly specify these encryption settings values in Zonal
+    #     endpoint API calls, and Amazon S3 will use the encryption settings
+    #     values from the `CreateSession` request to protect new objects in
+    #     the directory bucket.
+    #
+    #     <note markdown="1"> When you use the CLI or the Amazon Web Services SDKs, for
+    #     `CreateSession`, the session token refreshes automatically to avoid
+    #     service interruptions when a session expires. The CLI or the Amazon
+    #     Web Services SDKs use the bucket's default encryption configuration
+    #     for the `CreateSession` request. It's not supported to override the
+    #     encryption settings values in the `CreateSession` request. So in the
+    #     Zonal endpoint API calls (except [CopyObject][4] and
+    #     [UploadPartCopy][5]), the encryption request headers must match the
+    #     default encryption configuration of the directory bucket.
     #
-    #   <b>Directory buckets </b> - For directory buckets, only the
-    #   server-side encryption with Amazon S3 managed keys (SSE-S3) (`AES256`)
-    #   value is supported.
+    #      </note>
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [5]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
     # @option options [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
     #   created objects. The STANDARD storage class provides high durability
@@ -2528,44 +2720,81 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   If `x-amz-server-side-encryption` has a valid value of `aws:kms` or
-    #   `aws:kms:dsse`, this header specifies the ID (Key ID, Key ARN, or Key
-    #   Alias) of the Key Management Service (KMS) symmetric encryption
-    #   customer managed key that was used for the object. If you specify
-    #   `x-amz-server-side-encryption:aws:kms` or
-    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide`
-    #   x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
-    #   Amazon Web Services managed key (`aws/s3`) to protect the data. If the
-    #   KMS key does not exist in the same account that's issuing the
-    #   command, you must use the full ARN and not just the ID.
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. If the KMS key doesn't exist in the same account
+    #   that's issuing the command, you must use the full Key ARN not the Key
+    #   ID.
+    #
+    #   **General purpose buckets** - If you specify
+    #   `x-amz-server-side-encryption` with `aws:kms` or `aws:kms:dsse`, this
+    #   header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key
+    #   to use. If you specify `x-amz-server-side-encryption:aws:kms` or
+    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide
+    #   `x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
+    #   Amazon Web Services managed key (`aws/s3`) to protect the data.
+    #
+    #   **Directory buckets** - If you specify `x-amz-server-side-encryption`
+    #   with `aws:kms`, you must specify the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header with the ID (Key
+    #   ID or Key ARN) of the KMS symmetric encryption customer managed key to
+    #   use. Otherwise, you get an HTTP `400 Bad Request` error. Only use the
+    #   key ID or key ARN. The key alias format of the KMS key isn't
+    #   supported. Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][1] per directory bucket for the lifetime of the bucket.
+    #   [Amazon Web Services managed key][2] (`aws/s3`) isn't supported.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
+    # @option options [String] :ssekms_encryption_context
+    #   Specifies the Amazon Web Services KMS Encryption Context as an
+    #   additional encryption context to use for object encryption. The value
+    #   of this header is a Base64-encoded string of a UTF-8 encoded JSON,
+    #   which contains the encryption context as key-value pairs. This value
+    #   is stored as object metadata and automatically gets passed on to
+    #   Amazon Web Services KMS for future `GetObject` operations on this
+    #   object.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #   **General purpose buckets** - This value must be explicitly added
+    #   during `CopyObject` operations if you want an additional encryption
+    #   context for your object. For more information, see [Encryption
+    #   context][1] in the *Amazon S3 User Guide*.
     #
-    #    </note>
-    # @option options [String] :ssekms_encryption_context
-    #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs. This
-    #   value is stored as object metadata and automatically gets passed on to
-    #   Amazon Web Services KMS for future `GetObject` or `CopyObject`
-    #   operations on this object. This value must be explicitly added during
-    #   `CopyObject` operations.
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
     #
-    #    </note>
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html#encryption-context
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
-    #   (KMS) keys (SSE-KMS). Setting this header to `true` causes Amazon S3
-    #   to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   (KMS) keys (SSE-KMS).
+    #
+    #   **General purpose buckets** - Setting this header to `true` causes
+    #   Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   Also, specifying this header with a PUT action doesn't affect
+    #   bucket-level settings for S3 Bucket Key.
     #
-    #   Specifying this header with a PUT action doesn’t affect bucket-level
-    #   settings for S3 Bucket Key.
+    #   **Directory buckets** - S3 Bucket Keys are always enabled for `GET`
+    #   and `PUT` operations in a directory bucket and can’t be disabled. S3
+    #   Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects
+    #   from general purpose buckets to directory buckets, from directory
+    #   buckets to general purpose buckets, or between directory buckets,
+    #   through [CopyObject][1], [UploadPartCopy][2], [the Copy operation in
+    #   Batch Operations][3], or [the import jobs][4]. In this case, Amazon S3
+    #   makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
     #
-    #    </note>
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-buckets-objects-Batch-Ops
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/create-import-job
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
@@ -2624,7 +2853,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.put_object(options)
       end
       resp.data
@@ -2765,7 +2994,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.restore_object(options)
       end
       resp.data
@@ -2779,6 +3008,12 @@ module Aws::S3
     #     if_none_match: "IfNoneMatch",
     #     if_unmodified_since: Time.now,
     #     range: "Range",
+    #     response_cache_control: "ResponseCacheControl",
+    #     response_content_disposition: "ResponseContentDisposition",
+    #     response_content_encoding: "ResponseContentEncoding",
+    #     response_content_language: "ResponseContentLanguage",
+    #     response_content_type: "ResponseContentType",
+    #     response_expires: Time.now,
     #     version_id: "ObjectVersionId",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -2866,6 +3101,18 @@ module Aws::S3
     #   satisfiable, only the `ContentLength` is affected in the response. If
     #   the Range is not satisfiable, S3 returns a `416 - Requested Range Not
     #   Satisfiable` error.
+    # @option options [String] :response_cache_control
+    #   Sets the `Cache-Control` header of the response.
+    # @option options [String] :response_content_disposition
+    #   Sets the `Content-Disposition` header of the response.
+    # @option options [String] :response_content_encoding
+    #   Sets the `Content-Encoding` header of the response.
+    # @option options [String] :response_content_language
+    #   Sets the `Content-Language` header of the response.
+    # @option options [String] :response_content_type
+    #   Sets the `Content-Type` header of the response.
+    # @option options [Time,DateTime,Date,Integer,String] :response_expires
+    #   Sets the `Expires` header of the response.
     # @option options [String] :version_id
     #   Version ID used to reference a specific version of the object.
     #
@@ -2926,17 +3173,27 @@ module Aws::S3
     # @option options [String] :checksum_mode
     #   To retrieve the checksum, this parameter must be enabled.
     #
-    #   In addition, if you enable `ChecksumMode` and the object is encrypted
-    #   with Amazon Web Services Key Management Service (Amazon Web Services
-    #   KMS), you must have permission to use the `kms:Decrypt` action for the
-    #   request to succeed.
+    #   **General purpose buckets** - If you enable checksum mode and the
+    #   object is uploaded with a [checksum][1] and encrypted with an Key
+    #   Management Service (KMS) key, you must have permission to use the
+    #   `kms:Decrypt` action to retrieve the checksum.
+    #
+    #   **Directory buckets** - If you enable `ChecksumMode` and the object is
+    #   encrypted with Amazon Web Services Key Management Service (Amazon Web
+    #   Services KMS), you must also have the `kms:GenerateDataKey` and
+    #   `kms:Decrypt` permissions in IAM identity-based policies and KMS key
+    #   policies for the KMS key to retrieve the checksum of the object.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_Checksum.html
     # @return [Types::HeadObjectOutput]
     def head(options = {})
       options = options.merge(
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.head_object(options)
       end
       resp.data
@@ -3119,13 +3376,13 @@ module Aws::S3
       #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
       #   the supported algorithm from the following list:
       #
-      #   * CRC32
+      #   * `CRC32`
       #
-      #   * CRC32C
+      #   * `CRC32C`
       #
-      #   * SHA1
+      #   * `SHA1`
       #
-      #   * SHA256
+      #   * `SHA256`
       #
       #   For more information, see [Checking object integrity][1] in the
       #   *Amazon S3 User Guide*.
@@ -3154,7 +3411,7 @@ module Aws::S3
               key: item.key
             }
           end
-          Aws::Plugins::UserAgent.feature('resource') do
+          Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
             batch[0].client.delete_objects(params)
           end
         end
@@ -3166,3 +3423,6 @@ module Aws::S3
     end
   end
 end
+
+# Load customizations if they exist
+require 'aws-sdk-s3/customizations/object'