aws-sdk-s3 1.142.0 → 1.208.0

data/lib/aws-sdk-s3/object.rb

@@ -66,7 +66,9 @@ module Aws::S3
     # providing object expiration information. The value of the `rule-id` is
     # URL-encoded.
     #
-    # <note markdown="1"> This functionality is not supported for directory buckets.
+    # <note markdown="1"> Object expiration information is not returned in directory buckets and
+    # this header returns the value "`NotImplemented`" in all responses
+    # for directory buckets.
     #
     #  </note>
     #
@@ -95,9 +97,10 @@ module Aws::S3
     # For more information about archiving objects, see [Transitioning
     # Objects: General Considerations][2].
     #
-    # <note markdown="1"> This functionality is not supported for directory buckets. Only the S3
-    # Express One Zone storage class is supported by directory buckets to
-    # store objects.
+    # <note markdown="1"> This functionality is not supported for directory buckets. Directory
+    # buckets only support `EXPRESS_ONEZONE` (the S3 Express One Zone
+    # storage class) in Availability Zones and `ONEZONE_IA` (the S3 One
+    # Zone-Infrequent Access storage class) in Dedicated Local Zones.
     #
     #  </note>
     #
@@ -132,14 +135,14 @@ module Aws::S3
       data[:content_length]
     end
 
-    # The base64-encoded, 32-bit CRC32 checksum of the object. This will
-    # only be present if it was uploaded with the object. When you use an
-    # API operation on an object that was uploaded using multipart uploads,
-    # this value may not be a direct checksum value of the full object.
-    # Instead, it's a calculation based on the checksum values of each
-    # individual part. For more information about how checksums are
-    # calculated with multipart uploads, see [ Checking object integrity][1]
-    # in the *Amazon S3 User Guide*.
+    # The Base64 encoded, 32-bit `CRC32 checksum` of the object. This
+    # checksum is only present if the checksum was uploaded with the object.
+    # When you use an API operation on an object that was uploaded using
+    # multipart uploads, this value may not be a direct checksum value of
+    # the full object. Instead, it's a calculation based on the checksum
+    # values of each individual part. For more information about how
+    # checksums are calculated with multipart uploads, see [ Checking object
+    # integrity][1] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -149,14 +152,14 @@ module Aws::S3
       data[:checksum_crc32]
     end
 
-    # The base64-encoded, 32-bit CRC32C checksum of the object. This will
-    # only be present if it was uploaded with the object. When you use an
-    # API operation on an object that was uploaded using multipart uploads,
-    # this value may not be a direct checksum value of the full object.
-    # Instead, it's a calculation based on the checksum values of each
-    # individual part. For more information about how checksums are
-    # calculated with multipart uploads, see [ Checking object integrity][1]
-    # in the *Amazon S3 User Guide*.
+    # The Base64 encoded, 32-bit `CRC32C` checksum of the object. This
+    # checksum is only present if the checksum was uploaded with the object.
+    # When you use an API operation on an object that was uploaded using
+    # multipart uploads, this value may not be a direct checksum value of
+    # the full object. Instead, it's a calculation based on the checksum
+    # values of each individual part. For more information about how
+    # checksums are calculated with multipart uploads, see [ Checking object
+    # integrity][1] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -166,14 +169,26 @@ module Aws::S3
       data[:checksum_crc32c]
     end
 
-    # The base64-encoded, 160-bit SHA-1 digest of the object. This will only
-    # be present if it was uploaded with the object. When you use the API
-    # operation on an object that was uploaded using multipart uploads, this
-    # value may not be a direct checksum value of the full object. Instead,
-    # it's a calculation based on the checksum values of each individual
-    # part. For more information about how checksums are calculated with
-    # multipart uploads, see [ Checking object integrity][1] in the *Amazon
-    # S3 User Guide*.
+    # The Base64 encoded, 64-bit `CRC64NVME` checksum of the object. For
+    # more information, see [Checking object integrity in the Amazon S3 User
+    # Guide][1].
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @return [String]
+    def checksum_crc64nvme
+      data[:checksum_crc64nvme]
+    end
+
+    # The Base64 encoded, 160-bit `SHA1` digest of the object. This checksum
+    # is only present if the checksum was uploaded with the object. When you
+    # use the API operation on an object that was uploaded using multipart
+    # uploads, this value may not be a direct checksum value of the full
+    # object. Instead, it's a calculation based on the checksum values of
+    # each individual part. For more information about how checksums are
+    # calculated with multipart uploads, see [ Checking object integrity][1]
+    # in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -183,14 +198,14 @@ module Aws::S3
       data[:checksum_sha1]
     end
 
-    # The base64-encoded, 256-bit SHA-256 digest of the object. This will
-    # only be present if it was uploaded with the object. When you use an
-    # API operation on an object that was uploaded using multipart uploads,
-    # this value may not be a direct checksum value of the full object.
-    # Instead, it's a calculation based on the checksum values of each
-    # individual part. For more information about how checksums are
-    # calculated with multipart uploads, see [ Checking object integrity][1]
-    # in the *Amazon S3 User Guide*.
+    # The Base64 encoded, 256-bit `SHA256` digest of the object. This
+    # checksum is only present if the checksum was uploaded with the object.
+    # When you use an API operation on an object that was uploaded using
+    # multipart uploads, this value may not be a direct checksum value of
+    # the full object. Instead, it's a calculation based on the checksum
+    # values of each individual part. For more information about how
+    # checksums are calculated with multipart uploads, see [ Checking object
+    # integrity][1] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -200,6 +215,21 @@ module Aws::S3
       data[:checksum_sha256]
     end
 
+    # The checksum type, which determines how part-level checksums are
+    # combined to create an object-level checksum for multipart objects. You
+    # can use this header response to verify that the checksum type that is
+    # received is the same checksum type that was specified in
+    # `CreateMultipartUpload` request. For more information, see [Checking
+    # object integrity in the Amazon S3 User Guide][1].
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @return [String]
+    def checksum_type
+      data[:checksum_type]
+    end
+
     # An entity tag (ETag) is an opaque identifier assigned by a web server
     # to a specific version of a resource found at a URL.
     # @return [String]
@@ -263,6 +293,13 @@ module Aws::S3
       data[:content_type]
     end
 
+    # The portion of the object returned in the response for a `GET`
+    # request.
+    # @return [String]
+    def content_range
+      data[:content_range]
+    end
+
     # The date and time at which the object is no longer cacheable.
     # @return [Time]
     def expires
@@ -287,10 +324,10 @@ module Aws::S3
     end
 
     # The server-side encryption algorithm used when you store this object
-    # in Amazon S3 (for example, `AES256`, `aws:kms`, `aws:kms:dsse`).
+    # in Amazon S3 or Amazon FSx.
     #
-    # <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    # managed keys (SSE-S3) (`AES256`) is supported.
+    # <note markdown="1"> When accessing data stored in Amazon FSx file systems using S3 access
+    # points, the only valid server side encryption option is `aws:fsx`.
     #
     #  </note>
     # @return [String]
@@ -329,13 +366,8 @@ module Aws::S3
       data[:sse_customer_key_md5]
     end
 
-    # If present, indicates the ID of the Key Management Service (KMS)
-    # symmetric encryption customer managed key that was used for the
-    # object.
-    #
-    # <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #  </note>
+    # If present, indicates the ID of the KMS key that was used for object
+    # encryption.
     # @return [String]
     def ssekms_key_id
       data[:ssekms_key_id]
@@ -343,10 +375,6 @@ module Aws::S3
 
     # Indicates whether the object uses an S3 Bucket Key for server-side
     # encryption with Key Management Service (KMS) keys (SSE-KMS).
-    #
-    # <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #  </note>
     # @return [Boolean]
     def bucket_key_enabled
       data[:bucket_key_enabled]
@@ -358,8 +386,10 @@ module Aws::S3
     #
     # For more information, see [Storage Classes][1].
     #
-    # <note markdown="1"> <b>Directory buckets </b> - Only the S3 Express One Zone storage class
-    # is supported by directory buckets to store objects.
+    # <note markdown="1"> <b>Directory buckets </b> - Directory buckets only support
+    # `EXPRESS_ONEZONE` (the S3 Express One Zone storage class) in
+    # Availability Zones and `ONEZONE_IA` (the S3 One Zone-Infrequent Access
+    # storage class) in Dedicated Local Zones.
     #
     #  </note>
     #
@@ -372,11 +402,17 @@ module Aws::S3
     end
 
     # If present, indicates that the requester was successfully charged for
-    # the request.
+    # the request. For more information, see [Using Requester Pays buckets
+    # for storage transfers and usage][1] in the *Amazon Simple Storage
+    # Service user guide*.
     #
     # <note markdown="1"> This functionality is not supported for directory buckets.
     #
     #  </note>
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html
     # @return [String]
     def request_charged
       data[:request_charged]
@@ -439,6 +475,24 @@ module Aws::S3
       data[:parts_count]
     end
 
+    # The number of tags, if any, on the object, when you have the relevant
+    # permission to read object tags.
+    #
+    # You can use [GetObjectTagging][1] to retrieve the tag set associated
+    # with an object.
+    #
+    # <note markdown="1"> This functionality is not supported for directory buckets.
+    #
+    #  </note>
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html
+    # @return [Integer]
+    def tag_count
+      data[:tag_count]
+    end
+
     # The Object Lock mode, if any, that's in effect for this object. This
     # header is only returned if the requester has the
     # `s3:GetObjectRetention` permission. For more information about S3
@@ -500,7 +554,7 @@ module Aws::S3
     #
     # @return [self]
     def load
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.head_object(
         bucket: @bucket_name,
         key: @key
@@ -550,7 +604,7 @@ module Aws::S3
       options, params = separate_params_and_options(options)
       waiter = Waiters::ObjectExists.new(options)
       yield_waiter_and_warn(waiter, &block) if block_given?
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         waiter.wait(params.merge(bucket: @bucket_name,
         key: @key))
       end
@@ -571,7 +625,7 @@ module Aws::S3
       options, params = separate_params_and_options(options)
       waiter = Waiters::ObjectNotExists.new(options)
       yield_waiter_and_warn(waiter, &block) if block_given?
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         waiter.wait(params.merge(bucket: @bucket_name,
         key: @key))
       end
@@ -676,7 +730,7 @@ module Aws::S3
           :retry
         end
       end
-      Aws::Plugins::UserAgent.feature('resource') do
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         Aws::Waiters::Waiter.new(options).wait({})
       end
     end
@@ -688,7 +742,7 @@ module Aws::S3
     #   object.copy_from({
     #     acl: "private", # accepts private, public-read, public-read-write, authenticated-read, aws-exec-read, bucket-owner-read, bucket-owner-full-control
     #     cache_control: "CacheControl",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     content_disposition: "ContentDisposition",
     #     content_encoding: "ContentEncoding",
     #     content_language: "ContentLanguage",
@@ -703,13 +757,15 @@ module Aws::S3
     #     grant_read: "GrantRead",
     #     grant_read_acp: "GrantReadACP",
     #     grant_write_acp: "GrantWriteACP",
+    #     if_match: "IfMatch",
+    #     if_none_match: "IfNoneMatch",
     #     metadata: {
     #       "MetadataKey" => "MetadataValue",
     #     },
     #     metadata_directive: "COPY", # accepts COPY, REPLACE
     #     tagging_directive: "COPY", # accepts COPY, REPLACE
-    #     server_side_encryption: "AES256", # accepts AES256, aws:kms, aws:kms:dsse
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE
+    #     server_side_encryption: "AES256", # accepts AES256, aws:fsx, aws:kms, aws:kms:dsse
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE, FSX_OPENZFS, FSX_ONTAP
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -959,6 +1015,35 @@ module Aws::S3
     #   * This functionality is not supported for Amazon S3 on Outposts.
     #
     #    </note>
+    # @option options [String] :if_match
+    #   Copies the object if the entity tag (ETag) of the destination object
+    #   matches the specified tag. If the ETag values do not match, the
+    #   operation returns a `412 Precondition Failed` error. If a concurrent
+    #   operation occurs during the upload S3 returns a `409
+    #   ConditionalRequestConflict` response. On a 409 failure you should
+    #   fetch the object's ETag and retry the upload.
+    #
+    #   Expects the ETag value as a string.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1].
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
+    # @option options [String] :if_none_match
+    #   Copies the object only if the object key name at the destination does
+    #   not already exist in the bucket specified. Otherwise, Amazon S3
+    #   returns a `412 Precondition Failed` error. If a concurrent operation
+    #   occurs during the upload S3 returns a `409 ConditionalRequestConflict`
+    #   response. On a 409 failure you should retry the upload.
+    #
+    #   Expects the '*' (asterisk) character.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1].
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
     # @option options [Hash<String,String>] :metadata
     #   A map of metadata to store with the object in S3.
     # @option options [String] :metadata_directive
@@ -1031,9 +1116,8 @@ module Aws::S3
     #    </note>
     # @option options [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing this object in
-    #   Amazon S3 (for example, `AES256`, `aws:kms`, `aws:kms:dsse`).
-    #   Unrecognized or unsupported values won’t write a destination object
-    #   and will receive a `400 Bad Request` response.
+    #   Amazon S3. Unrecognized or unsupported values won’t write a
+    #   destination object and will receive a `400 Bad Request` response.
     #
     #   Amazon S3 automatically encrypts all new objects that are copied to an
     #   S3 bucket. When copying an object, if you don't specify encryption
@@ -1041,35 +1125,80 @@ module Aws::S3
     #   object is set to the default encryption configuration of the
     #   destination bucket. By default, all buckets have a base level of
     #   encryption configuration that uses server-side encryption with Amazon
-    #   S3 managed keys (SSE-S3). If the destination bucket has a default
-    #   encryption configuration that uses server-side encryption with Key
-    #   Management Service (KMS) keys (SSE-KMS), dual-layer server-side
-    #   encryption with Amazon Web Services KMS keys (DSSE-KMS), or
-    #   server-side encryption with customer-provided encryption keys (SSE-C),
-    #   Amazon S3 uses the corresponding KMS key, or a customer-provided key
-    #   to encrypt the target object copy.
-    #
-    #   When you perform a `CopyObject` operation, if you want to use a
-    #   different type of encryption setting for the target object, you can
-    #   specify appropriate encryption-related headers to encrypt the target
-    #   object with an Amazon S3 managed key, a KMS key, or a
-    #   customer-provided key. If the encryption setting in your request is
-    #   different from the default encryption configuration of the destination
-    #   bucket, the encryption setting in your request takes precedence.
+    #   S3 managed keys (SSE-S3). If the destination bucket has a different
+    #   default encryption configuration, Amazon S3 uses the corresponding
+    #   encryption key to encrypt the target object copy.
     #
     #   With server-side encryption, Amazon S3 encrypts your data as it writes
     #   your data to disks in its data centers and decrypts the data when you
     #   access it. For more information about server-side encryption, see
     #   [Using Server-Side Encryption][1] in the *Amazon S3 User Guide*.
     #
-    #   <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    #   managed keys (SSE-S3) (`AES256`) is supported.
-    #
-    #    </note>
+    #   <b>General purpose buckets </b>
+    #
+    #   * For general purpose buckets, there are the following supported
+    #     options for server-side encryption: server-side encryption with Key
+    #     Management Service (KMS) keys (SSE-KMS), dual-layer server-side
+    #     encryption with Amazon Web Services KMS keys (DSSE-KMS), and
+    #     server-side encryption with customer-provided encryption keys
+    #     (SSE-C). Amazon S3 uses the corresponding KMS key, or a
+    #     customer-provided key to encrypt the target object copy.
+    #
+    #   * When you perform a `CopyObject` operation, if you want to use a
+    #     different type of encryption setting for the target object, you can
+    #     specify appropriate encryption-related headers to encrypt the target
+    #     object with an Amazon S3 managed key, a KMS key, or a
+    #     customer-provided key. If the encryption setting in your request is
+    #     different from the default encryption configuration of the
+    #     destination bucket, the encryption setting in your request takes
+    #     precedence.
+    #
+    #   <b>Directory buckets </b>
+    #
+    #   * For directory buckets, there are only two supported options for
+    #     server-side encryption: server-side encryption with Amazon S3
+    #     managed keys (SSE-S3) (`AES256`) and server-side encryption with KMS
+    #     keys (SSE-KMS) (`aws:kms`). We recommend that the bucket's default
+    #     encryption uses the desired encryption configuration and you don't
+    #     override the bucket default encryption in your `CreateSession`
+    #     requests or `PUT` object requests. Then, new objects are
+    #     automatically encrypted with the desired encryption settings. For
+    #     more information, see [Protecting data with server-side
+    #     encryption][2] in the *Amazon S3 User Guide*. For more information
+    #     about the encryption overriding behaviors in directory buckets, see
+    #     [Specifying server-side encryption with KMS for new object
+    #     uploads][3].
+    #
+    #   * To encrypt new object copies to a directory bucket with SSE-KMS, we
+    #     recommend you specify SSE-KMS as the directory bucket's default
+    #     encryption configuration with a KMS key (specifically, a [customer
+    #     managed key][4]). The [Amazon Web Services managed key][5]
+    #     (`aws/s3`) isn't supported. Your SSE-KMS configuration can only
+    #     support 1 [customer managed key][4] per directory bucket for the
+    #     lifetime of the bucket. After you specify a customer managed key for
+    #     SSE-KMS, you can't override the customer managed key for the
+    #     bucket's SSE-KMS configuration. Then, when you perform a
+    #     `CopyObject` operation and want to specify server-side encryption
+    #     settings for new object copies with SSE-KMS in the
+    #     encryption-related request headers, you must ensure the encryption
+    #     key is the same customer managed key that you specified for the
+    #     directory bucket's default encryption configuration.
+    #
+    #   * <b>S3 access points for Amazon FSx </b> - When accessing data stored
+    #     in Amazon FSx file systems using S3 access points, the only valid
+    #     server side encryption option is `aws:fsx`. All Amazon FSx file
+    #     systems have encryption configured by default and are encrypted at
+    #     rest. Data is automatically encrypted before being written to the
+    #     file system, and automatically decrypted as it is read. These
+    #     processes are handled transparently by Amazon FSx.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [4]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [5]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :storage_class
     #   If the `x-amz-storage-class` header is not used, the copied object
     #   will be stored in the `STANDARD` Storage Class by default. The
@@ -1077,10 +1206,12 @@ module Aws::S3
     #   availability. Depending on performance needs, you can specify a
     #   different Storage Class.
     #
-    #   <note markdown="1"> * <b>Directory buckets </b> - For directory buckets, only the S3
-    #     Express One Zone storage class is supported to store newly created
-    #     objects. Unsupported storage class values won't write a destination
-    #     object and will respond with the HTTP status code `400 Bad Request`.
+    #   <note markdown="1"> * <b>Directory buckets </b> - Directory buckets only support
+    #     `EXPRESS_ONEZONE` (the S3 Express One Zone storage class) in
+    #     Availability Zones and `ONEZONE_IA` (the S3 One Zone-Infrequent
+    #     Access storage class) in Dedicated Local Zones. Unsupported storage
+    #     class values won't write a destination object and will respond with
+    #     the HTTP status code `400 Bad Request`.
     #
     #   * <b>Amazon S3 on Outposts </b> - S3 on Outposts only uses the
     #     `OUTPOSTS` Storage Class.
@@ -1160,32 +1291,52 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   Specifies the KMS ID (Key ID, Key ARN, or Key Alias) to use for object
-    #   encryption. All GET and PUT requests for an object protected by KMS
-    #   will fail if they're not made via SSL or using SigV4. For information
-    #   about configuring any of the officially supported Amazon Web Services
-    #   SDKs and Amazon Web Services CLI, see [Specifying the Signature
-    #   Version in Request Authentication][1] in the *Amazon S3 User Guide*.
-    #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
-    #
-    #    </note>
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. All GET and PUT requests for an object protected by
+    #   KMS will fail if they're not made via SSL or using SigV4. For
+    #   information about configuring any of the officially supported Amazon
+    #   Web Services SDKs and Amazon Web Services CLI, see [Specifying the
+    #   Signature Version in Request Authentication][1] in the *Amazon S3 User
+    #   Guide*.
+    #
+    #   **Directory buckets** - To encrypt data using SSE-KMS, it's
+    #   recommended to specify the `x-amz-server-side-encryption` header to
+    #   `aws:kms`. Then, the `x-amz-server-side-encryption-aws-kms-key-id`
+    #   header implicitly uses the bucket's default KMS customer managed key
+    #   ID. If you want to explicitly set the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header, it must match the
+    #   bucket's default customer managed key (using key ID or ARN, not
+    #   alias). Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][2] per directory bucket's lifetime. The [Amazon Web
+    #   Services managed key][3] (`aws/s3`) isn't supported. Incorrect key
+    #   specification results in an HTTP `400 Bad Request` error.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingAWSSDK.html#specify-signature-version
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [3]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :ssekms_encryption_context
-    #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs. This
-    #   value must be explicitly added to specify encryption context for
-    #   `CopyObject` requests.
+    #   Specifies the Amazon Web Services KMS Encryption Context as an
+    #   additional encryption context to use for the destination object
+    #   encryption. The value of this header is a base64-encoded UTF-8 string
+    #   holding JSON with the encryption context key-value pairs.
     #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
+    #   **General purpose buckets** - This value must be explicitly added to
+    #   specify encryption context for `CopyObject` requests if you want an
+    #   additional encryption context for your destination object. The
+    #   additional encryption context of the source object won't be copied to
+    #   the destination object. For more information, see [Encryption
+    #   context][1] in the *Amazon S3 User Guide*.
     #
-    #    </note>
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html#encryption-context
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
@@ -1199,14 +1350,19 @@ module Aws::S3
     #   For more information, see [Amazon S3 Bucket Keys][1] in the *Amazon S3
     #   User Guide*.
     #
-    #   <note markdown="1"> This functionality is not supported when the destination bucket is a
-    #   directory bucket.
+    #   <note markdown="1"> **Directory buckets** - S3 Bucket Keys aren't supported, when you
+    #   copy SSE-KMS encrypted objects from general purpose buckets to
+    #   directory buckets, from directory buckets to general purpose buckets,
+    #   or between directory buckets, through [CopyObject][2]. In this case,
+    #   Amazon S3 makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
     #    </note>
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-key.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
     # @option options [String] :copy_source_sse_customer_algorithm
     #   Specifies the algorithm to use when decrypting the source object (for
     #   example, `AES256`).
@@ -1346,7 +1502,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.copy_object(options)
       end
       resp.data
@@ -1360,6 +1516,9 @@ module Aws::S3
     #     request_payer: "requester", # accepts requester
     #     bypass_governance_retention: false,
     #     expected_bucket_owner: "AccountId",
+    #     if_match: "IfMatch",
+    #     if_match_last_modified_time: Time.now,
+    #     if_match_size: 1,
     #   })
     # @param [Hash] options ({})
     # @option options [String] :mfa
@@ -1406,13 +1565,51 @@ module Aws::S3
     #   The account ID of the expected bucket owner. If the account ID that
     #   you provide does not match the actual owner of the bucket, the request
     #   fails with the HTTP status code `403 Forbidden` (access denied).
+    # @option options [String] :if_match
+    #   Deletes the object if the ETag (entity tag) value provided during the
+    #   delete operation matches the ETag of the object in S3. If the ETag
+    #   values do not match, the operation returns a `412 Precondition Failed`
+    #   error.
+    #
+    #   Expects the ETag value as a string. `If-Match` does accept a string
+    #   value of an '*' (asterisk) character to denote a match of any ETag.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1].
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
+    # @option options [Time,DateTime,Date,Integer,String] :if_match_last_modified_time
+    #   If present, the object is deleted only if its modification times
+    #   matches the provided `Timestamp`. If the `Timestamp` values do not
+    #   match, the operation returns a `412 Precondition Failed` error. If the
+    #   `Timestamp` matches or if the object doesn’t exist, the operation
+    #   returns a `204 Success (No Content)` response.
+    #
+    #   <note markdown="1"> This functionality is only supported for directory buckets.
+    #
+    #    </note>
+    # @option options [Integer] :if_match_size
+    #   If present, the object is deleted only if its size matches the
+    #   provided size in bytes. If the `Size` value does not match, the
+    #   operation returns a `412 Precondition Failed` error. If the `Size`
+    #   matches or if the object doesn’t exist, the operation returns a `204
+    #   Success (No Content)` response.
+    #
+    #   <note markdown="1"> This functionality is only supported for directory buckets.
+    #
+    #    </note>
+    #
+    #   You can use the `If-Match`, `x-amz-if-match-last-modified-time` and
+    #   `x-amz-if-match-size` conditional headers in conjunction with
+    #   each-other or individually.
     # @return [Types::DeleteObjectOutput]
     def delete(options = {})
       options = options.merge(
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.delete_object(options)
       end
       resp.data
@@ -1668,7 +1865,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.get_object(options, &block)
       end
       resp.data
@@ -1691,8 +1888,8 @@ module Aws::S3
     #     metadata: {
     #       "MetadataKey" => "MetadataValue",
     #     },
-    #     server_side_encryption: "AES256", # accepts AES256, aws:kms, aws:kms:dsse
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE
+    #     server_side_encryption: "AES256", # accepts AES256, aws:fsx, aws:kms, aws:kms:dsse
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE, FSX_OPENZFS, FSX_ONTAP
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -1706,7 +1903,8 @@ module Aws::S3
     #     object_lock_retain_until_date: Time.now,
     #     object_lock_legal_hold_status: "ON", # accepts ON, OFF
     #     expected_bucket_owner: "AccountId",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
+    #     checksum_type: "COMPOSITE", # accepts COMPOSITE, FULL_OBJECT
     #   })
     # @param [Hash] options ({})
     # @option options [String] :acl
@@ -2008,12 +2206,62 @@ module Aws::S3
     #   A map of metadata to store with the object in S3.
     # @option options [String] :server_side_encryption
     #   The server-side encryption algorithm used when you store this object
-    #   in Amazon S3 (for example, `AES256`, `aws:kms`).
+    #   in Amazon S3 or Amazon FSx.
+    #
+    #   * <b>Directory buckets </b> - For directory buckets, there are only
+    #     two supported options for server-side encryption: server-side
+    #     encryption with Amazon S3 managed keys (SSE-S3) (`AES256`) and
+    #     server-side encryption with KMS keys (SSE-KMS) (`aws:kms`). We
+    #     recommend that the bucket's default encryption uses the desired
+    #     encryption configuration and you don't override the bucket default
+    #     encryption in your `CreateSession` requests or `PUT` object
+    #     requests. Then, new objects are automatically encrypted with the
+    #     desired encryption settings. For more information, see [Protecting
+    #     data with server-side encryption][1] in the *Amazon S3 User Guide*.
+    #     For more information about the encryption overriding behaviors in
+    #     directory buckets, see [Specifying server-side encryption with KMS
+    #     for new object uploads][2].
+    #
+    #     In the Zonal endpoint API calls (except [CopyObject][3] and
+    #     [UploadPartCopy][4]) using the REST API, the encryption request
+    #     headers must match the encryption settings that are specified in the
+    #     `CreateSession` request. You can't override the values of the
+    #     encryption settings (`x-amz-server-side-encryption`,
+    #     `x-amz-server-side-encryption-aws-kms-key-id`,
+    #     `x-amz-server-side-encryption-context`, and
+    #     `x-amz-server-side-encryption-bucket-key-enabled`) that are
+    #     specified in the `CreateSession` request. You don't need to
+    #     explicitly specify these encryption settings values in Zonal
+    #     endpoint API calls, and Amazon S3 will use the encryption settings
+    #     values from the `CreateSession` request to protect new objects in
+    #     the directory bucket.
+    #
+    #     <note markdown="1"> When you use the CLI or the Amazon Web Services SDKs, for
+    #     `CreateSession`, the session token refreshes automatically to avoid
+    #     service interruptions when a session expires. The CLI or the Amazon
+    #     Web Services SDKs use the bucket's default encryption configuration
+    #     for the `CreateSession` request. It's not supported to override the
+    #     encryption settings values in the `CreateSession` request. So in the
+    #     Zonal endpoint API calls (except [CopyObject][3] and
+    #     [UploadPartCopy][4]), the encryption request headers must match the
+    #     default encryption configuration of the directory bucket.
     #
-    #   <note markdown="1"> For directory buckets, only server-side encryption with Amazon S3
-    #   managed keys (SSE-S3) (`AES256`) is supported.
+    #      </note>
     #
-    #    </note>
+    #   * <b>S3 access points for Amazon FSx </b> - When accessing data stored
+    #     in Amazon FSx file systems using S3 access points, the only valid
+    #     server side encryption option is `aws:fsx`. All Amazon FSx file
+    #     systems have encryption configured by default and are encrypted at
+    #     rest. Data is automatically encrypted before being written to the
+    #     file system, and automatically decrypted as it is read. These
+    #     processes are handled transparently by Amazon FSx.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
     # @option options [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
     #   created objects. The STANDARD storage class provides high durability
@@ -2021,8 +2269,9 @@ module Aws::S3
     #   a different Storage Class. For more information, see [Storage
     #   Classes][1] in the *Amazon S3 User Guide*.
     #
-    #   <note markdown="1"> * For directory buckets, only the S3 Express One Zone storage class is
-    #     supported to store newly created objects.
+    #   <note markdown="1"> * Directory buckets only support `EXPRESS_ONEZONE` (the S3 Express One
+    #     Zone storage class) in Availability Zones and `ONEZONE_IA` (the S3
+    #     One Zone-Infrequent Access storage class) in Dedicated Local Zones.
     #
     #   * Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
     #
@@ -2066,32 +2315,71 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   Specifies the ID (Key ID, Key ARN, or Key Alias) of the symmetric
-    #   encryption customer managed key to use for object encryption.
-    #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #    </note>
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. If the KMS key doesn't exist in the same account
+    #   that's issuing the command, you must use the full Key ARN not the Key
+    #   ID.
+    #
+    #   **General purpose buckets** - If you specify
+    #   `x-amz-server-side-encryption` with `aws:kms` or `aws:kms:dsse`, this
+    #   header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key
+    #   to use. If you specify `x-amz-server-side-encryption:aws:kms` or
+    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide
+    #   `x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
+    #   Amazon Web Services managed key (`aws/s3`) to protect the data.
+    #
+    #   **Directory buckets** - To encrypt data using SSE-KMS, it's
+    #   recommended to specify the `x-amz-server-side-encryption` header to
+    #   `aws:kms`. Then, the `x-amz-server-side-encryption-aws-kms-key-id`
+    #   header implicitly uses the bucket's default KMS customer managed key
+    #   ID. If you want to explicitly set the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header, it must match the
+    #   bucket's default customer managed key (using key ID or ARN, not
+    #   alias). Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][1] per directory bucket's lifetime. The [Amazon Web
+    #   Services managed key][2] (`aws/s3`) isn't supported. Incorrect key
+    #   specification results in an HTTP `400 Bad Request` error.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
     # @option options [String] :ssekms_encryption_context
     #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs.
-    #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
-    #
-    #    </note>
+    #   object encryption. The value of this header is a Base64 encoded string
+    #   of a UTF-8 encoded JSON, which contains the encryption context as
+    #   key-value pairs.
+    #
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
-    #   (KMS) keys (SSE-KMS). Setting this header to `true` causes Amazon S3
-    #   to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   (KMS) keys (SSE-KMS).
     #
-    #   Specifying this header with an object action doesn’t affect
+    #   **General purpose buckets** - Setting this header to `true` causes
+    #   Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   Also, specifying this header with a PUT action doesn't affect
     #   bucket-level settings for S3 Bucket Key.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #   **Directory buckets** - S3 Bucket Keys are always enabled for `GET`
+    #   and `PUT` operations in a directory bucket and can’t be disabled. S3
+    #   Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects
+    #   from general purpose buckets to directory buckets, from directory
+    #   buckets to general purpose buckets, or between directory buckets,
+    #   through [CopyObject][1], [UploadPartCopy][2], [the Copy operation in
+    #   Batch Operations][3], or [the import jobs][4]. In this case, Amazon S3
+    #   makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
-    #    </note>
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-buckets-objects-Batch-Ops
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/create-import-job
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
@@ -2147,13 +2435,21 @@ module Aws::S3
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_type
+    #   Indicates the checksum type that you want Amazon S3 to use to
+    #   calculate the object’s checksum value. For more information, see
+    #   [Checking object integrity in the Amazon S3 User Guide][1].
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @return [MultipartUpload]
     def initiate_multipart_upload(options = {})
       options = options.merge(
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.create_multipart_upload(options)
       end
       MultipartUpload.new(
@@ -2176,21 +2472,25 @@ module Aws::S3
     #     content_length: 1,
     #     content_md5: "ContentMD5",
     #     content_type: "ContentType",
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     checksum_crc32: "ChecksumCRC32",
     #     checksum_crc32c: "ChecksumCRC32C",
+    #     checksum_crc64nvme: "ChecksumCRC64NVME",
     #     checksum_sha1: "ChecksumSHA1",
     #     checksum_sha256: "ChecksumSHA256",
     #     expires: Time.now,
+    #     if_match: "IfMatch",
+    #     if_none_match: "IfNoneMatch",
     #     grant_full_control: "GrantFullControl",
     #     grant_read: "GrantRead",
     #     grant_read_acp: "GrantReadACP",
     #     grant_write_acp: "GrantWriteACP",
+    #     write_offset_bytes: 1,
     #     metadata: {
     #       "MetadataKey" => "MetadataValue",
     #     },
-    #     server_side_encryption: "AES256", # accepts AES256, aws:kms, aws:kms:dsse
-    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE
+    #     server_side_encryption: "AES256", # accepts AES256, aws:fsx, aws:kms, aws:kms:dsse
+    #     storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE, FSX_OPENZFS, FSX_ONTAP
     #     website_redirect_location: "WebsiteRedirectLocation",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -2281,7 +2581,7 @@ module Aws::S3
     #
     #   [1]: https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length
     # @option options [String] :content_md5
-    #   The base64-encoded 128-bit MD5 digest of the message (without the
+    #   The Base64 encoded 128-bit `MD5` digest of the message (without the
     #   headers) according to RFC 1864. This header can be used as a message
     #   integrity check to verify that the data is the same data that was
     #   originally sent. Although it is optional, we recommend using the
@@ -2289,10 +2589,11 @@ module Aws::S3
     #   information about REST request authentication, see [REST
     #   Authentication][1].
     #
-    #   <note markdown="1"> The `Content-MD5` header is required for any request to upload an
-    #   object with a retention period configured using Amazon S3 Object Lock.
-    #   For more information about Amazon S3 Object Lock, see [Amazon S3
-    #   Object Lock Overview][2] in the *Amazon S3 User Guide*.
+    #   <note markdown="1"> The `Content-MD5` or `x-amz-sdk-checksum-algorithm` header is required
+    #   for any request to upload an object with a retention period configured
+    #   using Amazon S3 Object Lock. For more information, see [Uploading
+    #   objects to an Object Lock enabled bucket ][2] in the *Amazon S3 User
+    #   Guide*.
     #
     #    </note>
     #
@@ -2303,7 +2604,7 @@ module Aws::S3
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/RESTAuthentication.html
-    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock-overview.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock-managing.html#object-lock-put-object
     # @option options [String] :content_type
     #   A standard MIME type describing the format of the contents. For more
     #   information, see
@@ -2323,37 +2624,45 @@ module Aws::S3
     #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
     #   the supported algorithm from the following list:
     #
-    #   * CRC32
+    #   * `CRC32`
     #
-    #   * CRC32C
+    #   * `CRC32C`
     #
-    #   * SHA1
+    #   * `CRC64NVME`
     #
-    #   * SHA256
+    #   * `SHA1`
+    #
+    #   * `SHA256`
     #
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
     #   If the individual checksum value you provide through
     #   `x-amz-checksum-algorithm ` doesn't match the checksum algorithm you
-    #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 ignores any
-    #   provided `ChecksumAlgorithm` parameter and uses the checksum algorithm
-    #   that matches the provided value in `x-amz-checksum-algorithm `.
+    #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 fails the
+    #   request with a `BadDigest` error.
     #
-    #   <note markdown="1"> For directory buckets, when you use Amazon Web Services SDKs, `CRC32`
-    #   is the default checksum algorithm that's used for performance.
+    #   <note markdown="1"> The `Content-MD5` or `x-amz-sdk-checksum-algorithm` header is required
+    #   for any request to upload an object with a retention period configured
+    #   using Amazon S3 Object Lock. For more information, see [Uploading
+    #   objects to an Object Lock enabled bucket ][2] in the *Amazon S3 User
+    #   Guide*.
     #
     #    </note>
     #
+    #   For directory buckets, when you use Amazon Web Services SDKs, `CRC32`
+    #   is the default checksum algorithm that's used for performance.
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock-managing.html#object-lock-put-object
     # @option options [String] :checksum_crc32
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
-    #   more information, see [Checking object integrity][1] in the *Amazon S3
-    #   User Guide*.
+    #   specifies the Base64 encoded, 32-bit `CRC32` checksum of the object.
+    #   For more information, see [Checking object integrity][1] in the
+    #   *Amazon S3 User Guide*.
     #
     #
     #
@@ -2361,17 +2670,28 @@ module Aws::S3
     # @option options [String] :checksum_crc32c
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 32-bit CRC32C checksum of the object.
+    #   specifies the Base64 encoded, 32-bit `CRC32C` checksum of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
+    # @option options [String] :checksum_crc64nvme
+    #   This header can be used as a data integrity check to verify that the
+    #   data received is the same data that was originally sent. This header
+    #   specifies the Base64 encoded, 64-bit `CRC64NVME` checksum of the
+    #   object. The `CRC64NVME` checksum is always a full object checksum. For
+    #   more information, see [Checking object integrity in the Amazon S3 User
+    #   Guide][1].
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
     # @option options [String] :checksum_sha1
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 160-bit SHA-1 digest of the object. For
+    #   specifies the Base64 encoded, 160-bit `SHA1` digest of the object. For
     #   more information, see [Checking object integrity][1] in the *Amazon S3
     #   User Guide*.
     #
@@ -2381,7 +2701,7 @@ module Aws::S3
     # @option options [String] :checksum_sha256
     #   This header can be used as a data integrity check to verify that the
     #   data received is the same data that was originally sent. This header
-    #   specifies the base64-encoded, 256-bit SHA-256 digest of the object.
+    #   specifies the Base64 encoded, 256-bit `SHA256` digest of the object.
     #   For more information, see [Checking object integrity][1] in the
     #   *Amazon S3 User Guide*.
     #
@@ -2396,6 +2716,43 @@ module Aws::S3
     #
     #
     #   [1]: https://www.rfc-editor.org/rfc/rfc7234#section-5.3
+    # @option options [String] :if_match
+    #   Uploads the object only if the ETag (entity tag) value provided during
+    #   the WRITE operation matches the ETag of the object in S3. If the ETag
+    #   values do not match, the operation returns a `412 Precondition Failed`
+    #   error.
+    #
+    #   If a conflicting operation occurs during the upload S3 returns a `409
+    #   ConditionalRequestConflict` response. On a 409 failure you should
+    #   fetch the object's ETag and retry the upload.
+    #
+    #   Expects the ETag value as a string.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1], or
+    #   [Conditional requests][2] in the *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/conditional-requests.html
+    # @option options [String] :if_none_match
+    #   Uploads the object only if the object key name does not already exist
+    #   in the bucket specified. Otherwise, Amazon S3 returns a `412
+    #   Precondition Failed` error.
+    #
+    #   If a conflicting operation occurs during the upload S3 returns a `409
+    #   ConditionalRequestConflict` response. On a 409 failure you should
+    #   retry the upload.
+    #
+    #   Expects the '*' (asterisk) character.
+    #
+    #   For more information about conditional requests, see [RFC 7232][1], or
+    #   [Conditional requests][2] in the *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://tools.ietf.org/html/rfc7232
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/conditional-requests.html
     # @option options [String] :grant_full_control
     #   Gives the grantee READ, READ\_ACP, and WRITE\_ACP permissions on the
     #   object.
@@ -2429,32 +2786,89 @@ module Aws::S3
     #   * This functionality is not supported for Amazon S3 on Outposts.
     #
     #    </note>
+    # @option options [Integer] :write_offset_bytes
+    #   Specifies the offset for appending data to existing objects in bytes.
+    #   The offset must be equal to the size of the existing object being
+    #   appended to. If no object exists, setting this header to 0 will create
+    #   a new object.
+    #
+    #   <note markdown="1"> This functionality is only supported for objects in the Amazon S3
+    #   Express One Zone storage class in directory buckets.
+    #
+    #    </note>
     # @option options [Hash<String,String>] :metadata
     #   A map of metadata to store with the object in S3.
     # @option options [String] :server_side_encryption
     #   The server-side encryption algorithm that was used when you store this
-    #   object in Amazon S3 (for example, `AES256`, `aws:kms`,
-    #   `aws:kms:dsse`).
-    #
-    #   <b>General purpose buckets </b> - You have four mutually exclusive
-    #   options to protect data using server-side encryption in Amazon S3,
-    #   depending on how you choose to manage the encryption keys.
-    #   Specifically, the encryption key options are Amazon S3 managed keys
-    #   (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and
-    #   customer-provided keys (SSE-C). Amazon S3 encrypts data with
-    #   server-side encryption by using Amazon S3 managed keys (SSE-S3) by
-    #   default. You can optionally tell Amazon S3 to encrypt data at rest by
-    #   using server-side encryption with other key options. For more
-    #   information, see [Using Server-Side Encryption][1] in the *Amazon S3
-    #   User Guide*.
+    #   object in Amazon S3 or Amazon FSx.
+    #
+    #   * <b>General purpose buckets </b> - You have four mutually exclusive
+    #     options to protect data using server-side encryption in Amazon S3,
+    #     depending on how you choose to manage the encryption keys.
+    #     Specifically, the encryption key options are Amazon S3 managed keys
+    #     (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and
+    #     customer-provided keys (SSE-C). Amazon S3 encrypts data with
+    #     server-side encryption by using Amazon S3 managed keys (SSE-S3) by
+    #     default. You can optionally tell Amazon S3 to encrypt data at rest
+    #     by using server-side encryption with other key options. For more
+    #     information, see [Using Server-Side Encryption][1] in the *Amazon S3
+    #     User Guide*.
+    #
+    #   * <b>Directory buckets </b> - For directory buckets, there are only
+    #     two supported options for server-side encryption: server-side
+    #     encryption with Amazon S3 managed keys (SSE-S3) (`AES256`) and
+    #     server-side encryption with KMS keys (SSE-KMS) (`aws:kms`). We
+    #     recommend that the bucket's default encryption uses the desired
+    #     encryption configuration and you don't override the bucket default
+    #     encryption in your `CreateSession` requests or `PUT` object
+    #     requests. Then, new objects are automatically encrypted with the
+    #     desired encryption settings. For more information, see [Protecting
+    #     data with server-side encryption][2] in the *Amazon S3 User Guide*.
+    #     For more information about the encryption overriding behaviors in
+    #     directory buckets, see [Specifying server-side encryption with KMS
+    #     for new object uploads][3].
+    #
+    #     In the Zonal endpoint API calls (except [CopyObject][4] and
+    #     [UploadPartCopy][5]) using the REST API, the encryption request
+    #     headers must match the encryption settings that are specified in the
+    #     `CreateSession` request. You can't override the values of the
+    #     encryption settings (`x-amz-server-side-encryption`,
+    #     `x-amz-server-side-encryption-aws-kms-key-id`,
+    #     `x-amz-server-side-encryption-context`, and
+    #     `x-amz-server-side-encryption-bucket-key-enabled`) that are
+    #     specified in the `CreateSession` request. You don't need to
+    #     explicitly specify these encryption settings values in Zonal
+    #     endpoint API calls, and Amazon S3 will use the encryption settings
+    #     values from the `CreateSession` request to protect new objects in
+    #     the directory bucket.
+    #
+    #     <note markdown="1"> When you use the CLI or the Amazon Web Services SDKs, for
+    #     `CreateSession`, the session token refreshes automatically to avoid
+    #     service interruptions when a session expires. The CLI or the Amazon
+    #     Web Services SDKs use the bucket's default encryption configuration
+    #     for the `CreateSession` request. It's not supported to override the
+    #     encryption settings values in the `CreateSession` request. So in the
+    #     Zonal endpoint API calls (except [CopyObject][4] and
+    #     [UploadPartCopy][5]), the encryption request headers must match the
+    #     default encryption configuration of the directory bucket.
+    #
+    #      </note>
     #
-    #   <b>Directory buckets </b> - For directory buckets, only the
-    #   server-side encryption with Amazon S3 managed keys (SSE-S3) (`AES256`)
-    #   value is supported.
+    #   * <b>S3 access points for Amazon FSx </b> - When accessing data stored
+    #     in Amazon FSx file systems using S3 access points, the only valid
+    #     server side encryption option is `aws:fsx`. All Amazon FSx file
+    #     systems have encryption configured by default and are encrypted at
+    #     rest. Data is automatically encrypted before being written to the
+    #     file system, and automatically decrypted as it is read. These
+    #     processes are handled transparently by Amazon FSx.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-serv-side-encryption.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-specifying-kms-encryption.html
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [5]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
     # @option options [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
     #   created objects. The STANDARD storage class provides high durability
@@ -2462,8 +2876,9 @@ module Aws::S3
     #   a different Storage Class. For more information, see [Storage
     #   Classes][1] in the *Amazon S3 User Guide*.
     #
-    #   <note markdown="1"> * For directory buckets, only the S3 Express One Zone storage class is
-    #     supported to store newly created objects.
+    #   <note markdown="1"> * Directory buckets only support `EXPRESS_ONEZONE` (the S3 Express One
+    #     Zone storage class) in Availability Zones and `ONEZONE_IA` (the S3
+    #     One Zone-Infrequent Access storage class) in Dedicated Local Zones.
     #
     #   * Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
     #
@@ -2528,44 +2943,83 @@ module Aws::S3
     #
     #    </note>
     # @option options [String] :ssekms_key_id
-    #   If `x-amz-server-side-encryption` has a valid value of `aws:kms` or
-    #   `aws:kms:dsse`, this header specifies the ID (Key ID, Key ARN, or Key
-    #   Alias) of the Key Management Service (KMS) symmetric encryption
-    #   customer managed key that was used for the object. If you specify
-    #   `x-amz-server-side-encryption:aws:kms` or
-    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide`
-    #   x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
-    #   Amazon Web Services managed key (`aws/s3`) to protect the data. If the
-    #   KMS key does not exist in the same account that's issuing the
-    #   command, you must use the full ARN and not just the ID.
+    #   Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for
+    #   object encryption. If the KMS key doesn't exist in the same account
+    #   that's issuing the command, you must use the full Key ARN not the Key
+    #   ID.
+    #
+    #   **General purpose buckets** - If you specify
+    #   `x-amz-server-side-encryption` with `aws:kms` or `aws:kms:dsse`, this
+    #   header specifies the ID (Key ID, Key ARN, or Key Alias) of the KMS key
+    #   to use. If you specify `x-amz-server-side-encryption:aws:kms` or
+    #   `x-amz-server-side-encryption:aws:kms:dsse`, but do not provide
+    #   `x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
+    #   Amazon Web Services managed key (`aws/s3`) to protect the data.
+    #
+    #   **Directory buckets** - To encrypt data using SSE-KMS, it's
+    #   recommended to specify the `x-amz-server-side-encryption` header to
+    #   `aws:kms`. Then, the `x-amz-server-side-encryption-aws-kms-key-id`
+    #   header implicitly uses the bucket's default KMS customer managed key
+    #   ID. If you want to explicitly set the `
+    #   x-amz-server-side-encryption-aws-kms-key-id` header, it must match the
+    #   bucket's default customer managed key (using key ID or ARN, not
+    #   alias). Your SSE-KMS configuration can only support 1 [customer
+    #   managed key][1] per directory bucket's lifetime. The [Amazon Web
+    #   Services managed key][2] (`aws/s3`) isn't supported. Incorrect key
+    #   specification results in an HTTP `400 Bad Request` error.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#customer-cmk
+    #   [2]: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#aws-managed-cmk
+    # @option options [String] :ssekms_encryption_context
+    #   Specifies the Amazon Web Services KMS Encryption Context as an
+    #   additional encryption context to use for object encryption. The value
+    #   of this header is a Base64 encoded string of a UTF-8 encoded JSON,
+    #   which contains the encryption context as key-value pairs. This value
+    #   is stored as object metadata and automatically gets passed on to
+    #   Amazon Web Services KMS for future `GetObject` operations on this
+    #   object.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #   **General purpose buckets** - This value must be explicitly added
+    #   during `CopyObject` operations if you want an additional encryption
+    #   context for your object. For more information, see [Encryption
+    #   context][1] in the *Amazon S3 User Guide*.
     #
-    #    </note>
-    # @option options [String] :ssekms_encryption_context
-    #   Specifies the Amazon Web Services KMS Encryption Context to use for
-    #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs. This
-    #   value is stored as object metadata and automatically gets passed on to
-    #   Amazon Web Services KMS for future `GetObject` or `CopyObject`
-    #   operations on this object. This value must be explicitly added during
-    #   `CopyObject` operations.
+    #   **Directory buckets** - You can optionally provide an explicit
+    #   encryption context value. The value must match the default encryption
+    #   context - the bucket Amazon Resource Name (ARN). An additional
+    #   encryption context value is not supported.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
     #
-    #    </note>
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html#encryption-context
     # @option options [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
     #   encryption with server-side encryption using Key Management Service
-    #   (KMS) keys (SSE-KMS). Setting this header to `true` causes Amazon S3
-    #   to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   (KMS) keys (SSE-KMS).
+    #
+    #   **General purpose buckets** - Setting this header to `true` causes
+    #   Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
+    #   Also, specifying this header with a PUT action doesn't affect
+    #   bucket-level settings for S3 Bucket Key.
     #
-    #   Specifying this header with a PUT action doesn’t affect bucket-level
-    #   settings for S3 Bucket Key.
+    #   **Directory buckets** - S3 Bucket Keys are always enabled for `GET`
+    #   and `PUT` operations in a directory bucket and can’t be disabled. S3
+    #   Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects
+    #   from general purpose buckets to directory buckets, from directory
+    #   buckets to general purpose buckets, or between directory buckets,
+    #   through [CopyObject][1], [UploadPartCopy][2], [the Copy operation in
+    #   Batch Operations][3], or [the import jobs][4]. In this case, Amazon S3
+    #   makes a call to KMS every time a copy request is made for a
+    #   KMS-encrypted object.
     #
-    #   <note markdown="1"> This functionality is not supported for directory buckets.
     #
-    #    </note>
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CopyObject.html
+    #   [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
+    #   [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-buckets-objects-Batch-Ops
+    #   [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/create-import-job
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
@@ -2624,7 +3078,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.put_object(options)
       end
       resp.data
@@ -2680,7 +3134,7 @@ module Aws::S3
     #           bucket_name: "BucketName", # required
     #           prefix: "LocationPrefix", # required
     #           encryption: {
-    #             encryption_type: "AES256", # required, accepts AES256, aws:kms, aws:kms:dsse
+    #             encryption_type: "AES256", # required, accepts AES256, aws:fsx, aws:kms, aws:kms:dsse
     #             kms_key_id: "SSEKMSKeyId",
     #             kms_context: "KMSContext",
     #           },
@@ -2711,12 +3165,12 @@ module Aws::S3
     #               value: "MetadataValue",
     #             },
     #           ],
-    #           storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE
+    #           storage_class: "STANDARD", # accepts STANDARD, REDUCED_REDUNDANCY, STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER, DEEP_ARCHIVE, OUTPOSTS, GLACIER_IR, SNOW, EXPRESS_ONEZONE, FSX_OPENZFS, FSX_ONTAP
     #         },
     #       },
     #     },
     #     request_payer: "requester", # accepts requester
-    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+    #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
     #     expected_bucket_owner: "AccountId",
     #   })
     # @param [Hash] options ({})
@@ -2765,7 +3219,7 @@ module Aws::S3
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.restore_object(options)
       end
       resp.data
@@ -2779,6 +3233,12 @@ module Aws::S3
     #     if_none_match: "IfNoneMatch",
     #     if_unmodified_since: Time.now,
     #     range: "Range",
+    #     response_cache_control: "ResponseCacheControl",
+    #     response_content_disposition: "ResponseContentDisposition",
+    #     response_content_encoding: "ResponseContentEncoding",
+    #     response_content_language: "ResponseContentLanguage",
+    #     response_content_type: "ResponseContentType",
+    #     response_expires: Time.now,
     #     version_id: "ObjectVersionId",
     #     sse_customer_algorithm: "SSECustomerAlgorithm",
     #     sse_customer_key: "SSECustomerKey",
@@ -2866,6 +3326,18 @@ module Aws::S3
     #   satisfiable, only the `ContentLength` is affected in the response. If
     #   the Range is not satisfiable, S3 returns a `416 - Requested Range Not
     #   Satisfiable` error.
+    # @option options [String] :response_cache_control
+    #   Sets the `Cache-Control` header of the response.
+    # @option options [String] :response_content_disposition
+    #   Sets the `Content-Disposition` header of the response.
+    # @option options [String] :response_content_encoding
+    #   Sets the `Content-Encoding` header of the response.
+    # @option options [String] :response_content_language
+    #   Sets the `Content-Language` header of the response.
+    # @option options [String] :response_content_type
+    #   Sets the `Content-Type` header of the response.
+    # @option options [Time,DateTime,Date,Integer,String] :response_expires
+    #   Sets the `Expires` header of the response.
     # @option options [String] :version_id
     #   Version ID used to reference a specific version of the object.
     #
@@ -2926,17 +3398,27 @@ module Aws::S3
     # @option options [String] :checksum_mode
     #   To retrieve the checksum, this parameter must be enabled.
     #
-    #   In addition, if you enable `ChecksumMode` and the object is encrypted
-    #   with Amazon Web Services Key Management Service (Amazon Web Services
-    #   KMS), you must have permission to use the `kms:Decrypt` action for the
-    #   request to succeed.
+    #   **General purpose buckets** - If you enable checksum mode and the
+    #   object is uploaded with a [checksum][1] and encrypted with an Key
+    #   Management Service (KMS) key, you must have permission to use the
+    #   `kms:Decrypt` action to retrieve the checksum.
+    #
+    #   **Directory buckets** - If you enable `ChecksumMode` and the object is
+    #   encrypted with Amazon Web Services Key Management Service (Amazon Web
+    #   Services KMS), you must also have the `kms:GenerateDataKey` and
+    #   `kms:Decrypt` permissions in IAM identity-based policies and KMS key
+    #   policies for the KMS key to retrieve the checksum of the object.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_Checksum.html
     # @return [Types::HeadObjectOutput]
     def head(options = {})
       options = options.merge(
         bucket: @bucket_name,
         key: @key
       )
-      resp = Aws::Plugins::UserAgent.feature('resource') do
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
         @client.head_object(options)
       end
       resp.data
@@ -3055,7 +3537,7 @@ module Aws::S3
       #     request_payer: "requester", # accepts requester
       #     bypass_governance_retention: false,
       #     expected_bucket_owner: "AccountId",
-      #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256
+      #     checksum_algorithm: "CRC32", # accepts CRC32, CRC32C, SHA1, SHA256, CRC64NVME
       #   })
       # @param options ({})
       # @option options [String] :mfa
@@ -3119,22 +3601,23 @@ module Aws::S3
       #   For the `x-amz-checksum-algorithm ` header, replace ` algorithm ` with
       #   the supported algorithm from the following list:
       #
-      #   * CRC32
+      #   * `CRC32`
+      #
+      #   * `CRC32C`
       #
-      #   * CRC32C
+      #   * `CRC64NVME`
       #
-      #   * SHA1
+      #   * `SHA1`
       #
-      #   * SHA256
+      #   * `SHA256`
       #
       #   For more information, see [Checking object integrity][1] in the
       #   *Amazon S3 User Guide*.
       #
       #   If the individual checksum value you provide through
       #   `x-amz-checksum-algorithm ` doesn't match the checksum algorithm you
-      #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 ignores any
-      #   provided `ChecksumAlgorithm` parameter and uses the checksum algorithm
-      #   that matches the provided value in `x-amz-checksum-algorithm `.
+      #   set through `x-amz-sdk-checksum-algorithm`, Amazon S3 fails the
+      #   request with a `BadDigest` error.
       #
       #   If you provide an individual checksum, Amazon S3 ignores any provided
       #   `ChecksumAlgorithm` parameter.
@@ -3154,7 +3637,7 @@ module Aws::S3
               key: item.key
             }
           end
-          Aws::Plugins::UserAgent.feature('resource') do
+          Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
             batch[0].client.delete_objects(params)
           end
         end
@@ -3166,3 +3649,6 @@ module Aws::S3
     end
   end
 end
+
+# Load customizations if they exist
+require 'aws-sdk-s3/customizations/object'