aws-sdk-s3 1.126.0 → 1.127.0

data/lib/aws-sdk-s3/types.rb

@@ -65,7 +65,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -718,7 +718,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -871,7 +871,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -1256,7 +1256,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -1895,7 +1895,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2002,7 +2002,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2671,7 +2671,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2764,7 +2764,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2842,7 +2842,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -5046,7 +5046,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -5109,9 +5109,8 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] object_attributes
-    #   An XML header that specifies the fields at the root level that you
-    #   want returned in the response. Fields that you do not specify are
-    #   not returned.
+    #   Specifies the fields at the root level that you want returned in the
+    #   response. Fields that you do not specify are not returned.
     #   @return [Array<String>]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/GetObjectAttributesRequest AWS API Documentation
@@ -5528,7 +5527,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -5787,7 +5786,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -6045,7 +6044,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][3] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][3] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -6418,7 +6417,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -7242,8 +7241,8 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] continuation_token
-    #   The ContinuationToken that represents a placeholder from where this
-    #   request should begin.
+    #   The `ContinuationToken` that represents a placeholder from where
+    #   this request should begin.
     #   @return [String]
     #
     # @!attribute [rw] expected_bucket_owner
@@ -7355,9 +7354,9 @@ module Aws::S3
     #
     # @!attribute [rw] continuation_token
     #   The marker used to continue an inventory configuration listing that
-    #   has been truncated. Use the NextContinuationToken from a previously
-    #   truncated list response to continue the listing. The continuation
-    #   token is an opaque value that Amazon S3 understands.
+    #   has been truncated. Use the `NextContinuationToken` from a
+    #   previously truncated list response to continue the listing. The
+    #   continuation token is an opaque value that Amazon S3 understands.
     #   @return [String]
     #
     # @!attribute [rw] expected_bucket_owner
@@ -7418,7 +7417,7 @@ module Aws::S3
     #
     # @!attribute [rw] continuation_token
     #   The marker that is used to continue a metrics configuration listing
-    #   that has been truncated. Use the NextContinuationToken from a
+    #   that has been truncated. Use the `NextContinuationToken` from a
     #   previously truncated list response to continue the listing. The
     #   continuation token is an opaque value that Amazon S3 understands.
     #   @return [String]
@@ -7521,9 +7520,9 @@ module Aws::S3
     #   Encoding type used by Amazon S3 to encode object keys in the
     #   response.
     #
-    #   If you specify `encoding-type` request parameter, Amazon S3 includes
-    #   this element in the response, and returns encoded key name values in
-    #   the following response elements:
+    #   If you specify the `encoding-type` request parameter, Amazon S3
+    #   includes this element in the response, and returns encoded key name
+    #   values in the following response elements:
     #
     #   `Delimiter`, `KeyMarker`, `Prefix`, `NextKeyMarker`, `Key`.
     #   @return [String]
@@ -7572,7 +7571,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -7594,15 +7593,15 @@ module Aws::S3
     #
     # @!attribute [rw] encoding_type
     #   Requests Amazon S3 to encode the object keys in the response and
-    #   specifies the encoding method to use. An object key may contain any
-    #   Unicode character; however, XML 1.0 parser cannot parse some
+    #   specifies the encoding method to use. An object key can contain any
+    #   Unicode character; however, the XML 1.0 parser cannot parse some
     #   characters, such as characters with an ASCII value from 0 to 10. For
     #   characters that are not supported in XML 1.0, you can add this
     #   parameter to request that Amazon S3 encode the keys in the response.
     #   @return [String]
     #
     # @!attribute [rw] key_marker
-    #   Together with upload-id-marker, this parameter specifies the
+    #   Together with `upload-id-marker`, this parameter specifies the
     #   multipart upload after which listing should begin.
     #
     #   If `upload-id-marker` is not specified, only the keys
@@ -7624,8 +7623,8 @@ module Aws::S3
     # @!attribute [rw] prefix
     #   Lists in-progress uploads only for those keys that begin with the
     #   specified prefix. You can use prefixes to separate a bucket into
-    #   different grouping of keys. (You can think of using prefix to make
-    #   groups in the same way you'd use a folder in a file system.)
+    #   different grouping of keys. (You can think of using `prefix` to make
+    #   groups in the same way that you'd use a folder in a file system.)
     #   @return [String]
     #
     # @!attribute [rw] upload_id_marker
@@ -7674,9 +7673,9 @@ module Aws::S3
     # @!attribute [rw] is_truncated
     #   A flag that indicates whether Amazon S3 returned all of the results
     #   that satisfied the search criteria. If your results were truncated,
-    #   you can make a follow-up paginated request using the NextKeyMarker
-    #   and NextVersionIdMarker response parameters as a starting place in
-    #   another request to return the rest of the results.
+    #   you can make a follow-up paginated request by using the
+    #   `NextKeyMarker` and `NextVersionIdMarker` response parameters as a
+    #   starting place in another request to return the rest of the results.
     #   @return [Boolean]
     #
     # @!attribute [rw] key_marker
@@ -7698,7 +7697,7 @@ module Aws::S3
     #   When the number of responses exceeds the value of `MaxKeys`,
     #   `NextVersionIdMarker` specifies the first object version not
     #   returned that satisfies the search criteria. Use this value for the
-    #   version-id-marker request parameter in a subsequent request.
+    #   `version-id-marker` request parameter in a subsequent request.
     #   @return [String]
     #
     # @!attribute [rw] versions
@@ -7723,7 +7722,7 @@ module Aws::S3
     #   that you specify to group keys. All keys that contain the same
     #   string between the prefix and the first occurrence of the delimiter
     #   are grouped under a single result element in `CommonPrefixes`. These
-    #   groups are counted as one result against the max-keys limitation.
+    #   groups are counted as one result against the `max-keys` limitation.
     #   These keys are not returned elsewhere in the response.
     #   @return [String]
     #
@@ -7740,9 +7739,9 @@ module Aws::S3
     #   Encoding type used by Amazon S3 to encode object key names in the
     #   XML response.
     #
-    #   If you specify encoding-type request parameter, Amazon S3 includes
-    #   this element in the response, and returns encoded key name values in
-    #   the following response elements:
+    #   If you specify the `encoding-type` request parameter, Amazon S3
+    #   includes this element in the response, and returns encoded key name
+    #   values in the following response elements:
     #
     #   `KeyMarker, NextKeyMarker, Prefix, Key`, and `Delimiter`.
     #   @return [String]
@@ -7781,15 +7780,15 @@ module Aws::S3
     #   A delimiter is a character that you specify to group keys. All keys
     #   that contain the same string between the `prefix` and the first
     #   occurrence of the delimiter are grouped under a single result
-    #   element in CommonPrefixes. These groups are counted as one result
-    #   against the max-keys limitation. These keys are not returned
+    #   element in `CommonPrefixes`. These groups are counted as one result
+    #   against the `max-keys` limitation. These keys are not returned
     #   elsewhere in the response.
     #   @return [String]
     #
     # @!attribute [rw] encoding_type
     #   Requests Amazon S3 to encode the object keys in the response and
-    #   specifies the encoding method to use. An object key may contain any
-    #   Unicode character; however, XML 1.0 parser cannot parse some
+    #   specifies the encoding method to use. An object key can contain any
+    #   Unicode character; however, the XML 1.0 parser cannot parse some
     #   characters, such as characters with an ASCII value from 0 to 10. For
     #   characters that are not supported in XML 1.0, you can add this
     #   parameter to request that Amazon S3 encode the keys in the response.
@@ -7800,22 +7799,22 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] max_keys
-    #   Sets the maximum number of keys returned in the response. By default
-    #   the action returns up to 1,000 key names. The response might contain
-    #   fewer keys but will never contain more. If additional keys satisfy
-    #   the search criteria, but were not returned because max-keys was
-    #   exceeded, the response contains
-    #   &lt;isTruncated&gt;true&lt;/isTruncated&gt;. To return the
-    #   additional keys, see key-marker and version-id-marker.
+    #   Sets the maximum number of keys returned in the response. By
+    #   default, the action returns up to 1,000 key names. The response
+    #   might contain fewer keys but will never contain more. If additional
+    #   keys satisfy the search criteria, but were not returned because
+    #   `max-keys` was exceeded, the response contains
+    #   `<isTruncated>true</isTruncated>`. To return the additional keys,
+    #   see `key-marker` and `version-id-marker`.
     #   @return [Integer]
     #
     # @!attribute [rw] prefix
     #   Use this parameter to select only those keys that begin with the
     #   specified prefix. You can use prefixes to separate a bucket into
-    #   different groupings of keys. (You can think of using prefix to make
-    #   groups in the same way you'd use a folder in a file system.) You
-    #   can use prefix with delimiter to roll up numerous objects into a
-    #   single result under CommonPrefixes.
+    #   different groupings of keys. (You can think of using `prefix` to
+    #   make groups in the same way that you'd use a folder in a file
+    #   system.) You can use `prefix` with `delimiter` to roll up numerous
+    #   objects into a single result under `CommonPrefixes`.
     #   @return [String]
     #
     # @!attribute [rw] version_id_marker
@@ -7840,6 +7839,11 @@ module Aws::S3
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
     #   @return [String]
     #
+    # @!attribute [rw] optional_object_attributes
+    #   Specifies the optional fields that you want returned in the
+    #   response. Fields that you do not specify are not returned.
+    #   @return [Array<String>]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectVersionsRequest AWS API Documentation
     #
     class ListObjectVersionsRequest < Struct.new(
@@ -7851,7 +7855,8 @@ module Aws::S3
       :prefix,
       :version_id_marker,
       :expected_bucket_owner,
-      :request_payer)
+      :request_payer,
+      :optional_object_attributes)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -7867,14 +7872,18 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] next_marker
-    #   When response is truncated (the IsTruncated element value in the
-    #   response is true), you can use the key name in this field as marker
-    #   in the subsequent request to get next set of objects. Amazon S3
-    #   lists objects in alphabetical order Note: This element is returned
-    #   only if you have delimiter request parameter specified. If response
-    #   does not include the NextMarker and it is truncated, you can use the
-    #   value of the last Key in the response as the marker in the
-    #   subsequent request to get the next set of object keys.
+    #   When the response is truncated (the `IsTruncated` element value in
+    #   the response is `true`), you can use the key name in this field as
+    #   the `marker` parameter in the subsequent request to get the next set
+    #   of objects. Amazon S3 lists objects in alphabetical order.
+    #
+    #   <note markdown="1"> This element is returned only if you have the `delimiter` request
+    #   parameter specified. If the response does not include the
+    #   `NextMarker` element and it is truncated, you can use the value of
+    #   the last `Key` element in the response as the `marker` parameter in
+    #   the subsequent request to get the next set of object keys.
+    #
+    #    </note>
     #   @return [String]
     #
     # @!attribute [rw] contents
@@ -7905,19 +7914,20 @@ module Aws::S3
     #   All of the keys (up to 1,000) rolled up in a common prefix count as
     #   a single return when calculating the number of returns.
     #
-    #   A response can contain CommonPrefixes only if you specify a
+    #   A response can contain `CommonPrefixes` only if you specify a
     #   delimiter.
     #
-    #   CommonPrefixes contains all (if there are any) keys between Prefix
-    #   and the next occurrence of the string specified by the delimiter.
+    #   `CommonPrefixes` contains all (if there are any) keys between
+    #   `Prefix` and the next occurrence of the string specified by the
+    #   delimiter.
     #
-    #   CommonPrefixes lists keys that act like subdirectories in the
-    #   directory specified by Prefix.
+    #   `CommonPrefixes` lists keys that act like subdirectories in the
+    #   directory specified by `Prefix`.
     #
-    #   For example, if the prefix is notes/ and the delimiter is a slash
-    #   (/) as in notes/summer/july, the common prefix is notes/summer/. All
-    #   of the keys that roll up into a common prefix count as a single
-    #   return when calculating the number of returns.
+    #   For example, if the prefix is `notes/` and the delimiter is a slash
+    #   (`/`), as in `notes/summer/july`, the common prefix is
+    #   `notes/summer/`. All of the keys that roll up into a common prefix
+    #   count as a single return when calculating the number of returns.
     #   @return [Array<Types::CommonPrefix>]
     #
     # @!attribute [rw] encoding_type
@@ -7967,7 +7977,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -7976,13 +7986,13 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] delimiter
-    #   A delimiter is a character you use to group keys.
+    #   A delimiter is a character that you use to group keys.
     #   @return [String]
     #
     # @!attribute [rw] encoding_type
     #   Requests Amazon S3 to encode the object keys in the response and
-    #   specifies the encoding method to use. An object key may contain any
-    #   Unicode character; however, XML 1.0 parser cannot parse some
+    #   specifies the encoding method to use. An object key can contain any
+    #   Unicode character; however, the XML 1.0 parser cannot parse some
     #   characters, such as characters with an ASCII value from 0 to 10. For
     #   characters that are not supported in XML 1.0, you can add this
     #   parameter to request that Amazon S3 encode the keys in the response.
@@ -7995,9 +8005,9 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] max_keys
-    #   Sets the maximum number of keys returned in the response. By default
-    #   the action returns up to 1,000 key names. The response might contain
-    #   fewer keys but will never contain more.
+    #   Sets the maximum number of keys returned in the response. By
+    #   default, the action returns up to 1,000 key names. The response
+    #   might contain fewer keys but will never contain more.
     #   @return [Integer]
     #
     # @!attribute [rw] prefix
@@ -8016,6 +8026,11 @@ module Aws::S3
     #   `403 Forbidden` (access denied).
     #   @return [String]
     #
+    # @!attribute [rw] optional_object_attributes
+    #   Specifies the optional fields that you want returned in the
+    #   response. Fields that you do not specify are not returned.
+    #   @return [Array<String>]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectsRequest AWS API Documentation
     #
     class ListObjectsRequest < Struct.new(
@@ -8026,15 +8041,17 @@ module Aws::S3
       :max_keys,
       :prefix,
       :request_payer,
-      :expected_bucket_owner)
+      :expected_bucket_owner,
+      :optional_object_attributes)
       SENSITIVE = []
       include Aws::Structure
     end
 
     # @!attribute [rw] is_truncated
-    #   Set to false if all of the results were returned. Set to true if
+    #   Set to `false` if all of the results were returned. Set to `true` if
     #   more keys are available to return. If the number of results exceeds
-    #   that specified by MaxKeys, all of the results might not be returned.
+    #   that specified by `MaxKeys`, all of the results might not be
+    #   returned.
     #   @return [Boolean]
     #
     # @!attribute [rw] contents
@@ -8060,7 +8077,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8073,17 +8090,17 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] delimiter
-    #   Causes keys that contain the same string between the prefix and the
-    #   first occurrence of the delimiter to be rolled up into a single
-    #   result element in the CommonPrefixes collection. These rolled-up
+    #   Causes keys that contain the same string between the `prefix` and
+    #   the first occurrence of the delimiter to be rolled up into a single
+    #   result element in the `CommonPrefixes` collection. These rolled-up
     #   keys are not returned elsewhere in the response. Each rolled-up
     #   result counts as only one return against the `MaxKeys` value.
     #   @return [String]
     #
     # @!attribute [rw] max_keys
-    #   Sets the maximum number of keys returned in the response. By default
-    #   the action returns up to 1,000 key names. The response might contain
-    #   fewer keys but will never contain more.
+    #   Sets the maximum number of keys returned in the response. By
+    #   default, the action returns up to 1,000 key names. The response
+    #   might contain fewer keys but will never contain more.
     #   @return [Integer]
     #
     # @!attribute [rw] common_prefixes
@@ -8110,7 +8127,7 @@ module Aws::S3
     #   Encoding type used by Amazon S3 to encode object key names in the
     #   XML response.
     #
-    #   If you specify the encoding-type request parameter, Amazon S3
+    #   If you specify the `encoding-type` request parameter, Amazon S3
     #   includes this element in the response, and returns encoded key name
     #   values in the following response elements:
     #
@@ -8118,13 +8135,14 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] key_count
-    #   KeyCount is the number of keys returned with this request. KeyCount
-    #   will always be less than or equal to the `MaxKeys` field. Say you
-    #   ask for 50 keys, your result will include 50 keys or fewer.
+    #   `KeyCount` is the number of keys returned with this request.
+    #   `KeyCount` will always be less than or equal to the `MaxKeys` field.
+    #   For example, if you ask for 50 keys, your result will include 50
+    #   keys or fewer.
     #   @return [Integer]
     #
     # @!attribute [rw] continuation_token
-    #   If ContinuationToken was sent with the request, it is included in
+    #   If `ContinuationToken` was sent with the request, it is included in
     #   the response.
     #   @return [String]
     #
@@ -8185,7 +8203,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8194,7 +8212,7 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] delimiter
-    #   A delimiter is a character you use to group keys.
+    #   A delimiter is a character that you use to group keys.
     #   @return [String]
     #
     # @!attribute [rw] encoding_type
@@ -8203,9 +8221,9 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] max_keys
-    #   Sets the maximum number of keys returned in the response. By default
-    #   the action returns up to 1,000 key names. The response might contain
-    #   fewer keys but will never contain more.
+    #   Sets the maximum number of keys returned in the response. By
+    #   default, the action returns up to 1,000 key names. The response
+    #   might contain fewer keys but will never contain more.
     #   @return [Integer]
     #
     # @!attribute [rw] prefix
@@ -8213,15 +8231,15 @@ module Aws::S3
     #   @return [String]
     #
     # @!attribute [rw] continuation_token
-    #   ContinuationToken indicates Amazon S3 that the list is being
-    #   continued on this bucket with a token. ContinuationToken is
+    #   `ContinuationToken` indicates to Amazon S3 that the list is being
+    #   continued on this bucket with a token. `ContinuationToken` is
     #   obfuscated and is not a real key.
     #   @return [String]
     #
     # @!attribute [rw] fetch_owner
-    #   The owner field is not present in listV2 by default, if you want to
-    #   return owner field with each key in the result then set the fetch
-    #   owner field to true.
+    #   The owner field is not present in `ListObjectsV2` by default. If you
+    #   want to return the owner field with each key in the result, then set
+    #   the `FetchOwner` field to `true`.
     #   @return [Boolean]
     #
     # @!attribute [rw] start_after
@@ -8242,6 +8260,11 @@ module Aws::S3
     #   `403 Forbidden` (access denied).
     #   @return [String]
     #
+    # @!attribute [rw] optional_object_attributes
+    #   Specifies the optional fields that you want returned in the
+    #   response. Fields that you do not specify are not returned.
+    #   @return [Array<String>]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ListObjectsV2Request AWS API Documentation
     #
     class ListObjectsV2Request < Struct.new(
@@ -8254,7 +8277,8 @@ module Aws::S3
       :fetch_owner,
       :start_after,
       :request_payer,
-      :expected_bucket_owner)
+      :expected_bucket_owner,
+      :optional_object_attributes)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -8305,7 +8329,7 @@ module Aws::S3
     #
     # @!attribute [rw] next_part_number_marker
     #   When a list is truncated, this element specifies the last part in
-    #   the list, as well as the value to use for the part-number-marker
+    #   the list, as well as the value to use for the `part-number-marker`
     #   request parameter in a subsequent request.
     #   @return [Integer]
     #
@@ -8394,7 +8418,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8538,11 +8562,11 @@ module Aws::S3
     # A metadata key-value pair to store with an object.
     #
     # @!attribute [rw] name
-    #   Name of the Object.
+    #   Name of the object.
     #   @return [String]
     #
     # @!attribute [rw] value
-    #   Value of the Object.
+    #   Value of the object.
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/MetadataEntry AWS API Documentation
@@ -8957,6 +8981,18 @@ module Aws::S3
     #   The owner of the object
     #   @return [Types::Owner]
     #
+    # @!attribute [rw] restore_status
+    #   Specifies the restoration status of an object. Objects in certain
+    #   storage classes must be restored before they can be retrieved. For
+    #   more information about these storage classes and how to work with
+    #   archived objects, see [ Working with archived objects][1] in the
+    #   *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/archived-objects.html
+    #   @return [Types::RestoreStatus]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/Object AWS API Documentation
     #
     class Object < Struct.new(
@@ -8966,7 +9002,8 @@ module Aws::S3
       :checksum_algorithm,
       :size,
       :storage_class,
-      :owner)
+      :owner,
+      :restore_status)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -9201,6 +9238,18 @@ module Aws::S3
     #   Specifies the owner of the object.
     #   @return [Types::Owner]
     #
+    # @!attribute [rw] restore_status
+    #   Specifies the restoration status of an object. Objects in certain
+    #   storage classes must be restored before they can be retrieved. For
+    #   more information about these storage classes and how to work with
+    #   archived objects, see [ Working with archived objects][1] in the
+    #   *Amazon S3 User Guide*.
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/archived-objects.html
+    #   @return [Types::RestoreStatus]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/ObjectVersion AWS API Documentation
     #
     class ObjectVersion < Struct.new(
@@ -9212,7 +9261,8 @@ module Aws::S3
       :version_id,
       :is_latest,
       :last_modified,
-      :owner)
+      :owner,
+      :restore_status)
       SENSITIVE = []
       include Aws::Structure
     end
@@ -10668,7 +10718,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -11077,7 +11127,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -11586,7 +11636,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -12254,7 +12304,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -12372,6 +12422,49 @@ module Aws::S3
       include Aws::Structure
     end
 
+    # Specifies the restoration status of an object. Objects in certain
+    # storage classes must be restored before they can be retrieved. For
+    # more information about these storage classes and how to work with
+    # archived objects, see [ Working with archived objects][1] in the
+    # *Amazon S3 User Guide*.
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/archived-objects.html
+    #
+    # @!attribute [rw] is_restore_in_progress
+    #   Specifies whether the object is currently being restored. If the
+    #   object restoration is in progress, the header returns the value
+    #   `TRUE`. For example:
+    #
+    #   `x-amz-optional-object-attributes: IsRestoreInProgress="true"`
+    #
+    #   If the object restoration has completed, the header returns the
+    #   value `FALSE`. For example:
+    #
+    #   `x-amz-optional-object-attributes: IsRestoreInProgress="false",
+    #   RestoreExpiryDate="2012-12-21T00:00:00.000Z"`
+    #
+    #   If the object hasn't been restored, there is no header response.
+    #   @return [Boolean]
+    #
+    # @!attribute [rw] restore_expiry_date
+    #   Indicates when the restored copy will expire. This value is
+    #   populated only if the object has already been restored. For example:
+    #
+    #   `x-amz-optional-object-attributes: IsRestoreInProgress="false",
+    #   RestoreExpiryDate="2012-12-21T00:00:00.000Z"`
+    #   @return [Time]
+    #
+    # @see http://docs.aws.amazon.com/goto/WebAPI/s3-2006-03-01/RestoreStatus AWS API Documentation
+    #
+    class RestoreStatus < Struct.new(
+      :is_restore_in_progress,
+      :restore_expiry_date)
+      SENSITIVE = []
+      include Aws::Structure
+    end
+
     # Specifies the redirect behavior and when a redirect is applied. For
     # more information about routing rules, see [Configuring advanced
     # conditional redirects][1] in the *Amazon S3 User Guide*.
@@ -13311,7 +13404,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -13627,7 +13720,7 @@ module Aws::S3
     #   When you use this action with S3 on Outposts through the Amazon Web
     #   Services SDKs, you provide the Outposts access point ARN in place of
     #   the bucket name. For more information about S3 on Outposts ARNs, see
-    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   [What is S3 on Outposts?][2] in the *Amazon S3 User Guide*.
     #
     #
     #