aws-sdk-s3 1.119.2 → 1.158.0

data/lib/aws-sdk-s3/object_acl.rb

@@ -56,6 +56,10 @@ module Aws::S3
 
     # If present, indicates that the requester was successfully charged for
     # the request.
+    #
+    # <note markdown="1"> This functionality is not supported for directory buckets.
+    #
+    #  </note>
     # @return [String]
     def request_charged
       data[:request_charged]
@@ -75,10 +79,12 @@ module Aws::S3
     #
     # @return [self]
     def load
-      resp = @client.get_object_acl(
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
+        @client.get_object_acl(
         bucket: @bucket_name,
         key: @object_key
       )
+      end
       @data = resp.data
       self
     end
@@ -193,7 +199,9 @@ module Aws::S3
           :retry
         end
       end
-      Aws::Waiters::Waiter.new(options).wait({})
+      Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
+        Aws::Waiters::Waiter.new(options).wait({})
+      end
     end
 
     # @!group Actions
@@ -257,12 +265,12 @@ module Aws::S3
     #   [1]: http://www.ietf.org/rfc/rfc1864.txt
     # @option options [String] :checksum_algorithm
     #   Indicates the algorithm used to create the checksum for the object
-    #   when using the SDK. This header will not provide any additional
-    #   functionality if not using the SDK. When sending this header, there
-    #   must be a corresponding `x-amz-checksum` or `x-amz-trailer` header
-    #   sent. Otherwise, Amazon S3 fails the request with the HTTP status code
-    #   `400 Bad Request`. For more information, see [Checking object
-    #   integrity][1] in the *Amazon S3 User Guide*.
+    #   when you use the SDK. This header will not provide any additional
+    #   functionality if you don't use the SDK. When you send this header,
+    #   there must be a corresponding `x-amz-checksum` or `x-amz-trailer`
+    #   header sent. Otherwise, Amazon S3 fails the request with the HTTP
+    #   status code `400 Bad Request`. For more information, see [Checking
+    #   object integrity][1] in the *Amazon S3 User Guide*.
     #
     #   If you provide an individual checksum, Amazon S3 ignores any provided
     #   `ChecksumAlgorithm` parameter.
@@ -274,15 +282,15 @@ module Aws::S3
     #   Allows grantee the read, write, read ACP, and write ACP permissions on
     #   the bucket.
     #
-    #   This action is not supported by Amazon S3 on Outposts.
+    #   This functionality is not supported for Amazon S3 on Outposts.
     # @option options [String] :grant_read
     #   Allows grantee to list the objects in the bucket.
     #
-    #   This action is not supported by Amazon S3 on Outposts.
+    #   This functionality is not supported for Amazon S3 on Outposts.
     # @option options [String] :grant_read_acp
     #   Allows grantee to read the bucket ACL.
     #
-    #   This action is not supported by Amazon S3 on Outposts.
+    #   This functionality is not supported for Amazon S3 on Outposts.
     # @option options [String] :grant_write
     #   Allows grantee to create new objects in the bucket.
     #
@@ -291,30 +299,42 @@ module Aws::S3
     # @option options [String] :grant_write_acp
     #   Allows grantee to write the ACL for the applicable bucket.
     #
-    #   This action is not supported by Amazon S3 on Outposts.
+    #   This functionality is not supported for Amazon S3 on Outposts.
     # @option options [String] :request_payer
     #   Confirms that the requester knows that they will be charged for the
     #   request. Bucket owners need not specify this parameter in their
-    #   requests. For information about downloading objects from Requester
+    #   requests. If either the source or destination S3 bucket has Requester
+    #   Pays enabled, the requester will pay for corresponding charges to copy
+    #   the object. For information about downloading objects from Requester
     #   Pays buckets, see [Downloading Objects in Requester Pays Buckets][1]
     #   in the *Amazon S3 User Guide*.
     #
+    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #
+    #    </note>
+    #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html
     # @option options [String] :version_id
-    #   VersionId used to reference a specific version of the object.
+    #   Version ID used to reference a specific version of the object.
+    #
+    #   <note markdown="1"> This functionality is not supported for directory buckets.
+    #
+    #    </note>
     # @option options [String] :expected_bucket_owner
-    #   The account ID of the expected bucket owner. If the bucket is owned by
-    #   a different account, the request fails with the HTTP status code `403
-    #   Forbidden` (access denied).
+    #   The account ID of the expected bucket owner. If the account ID that
+    #   you provide does not match the actual owner of the bucket, the request
+    #   fails with the HTTP status code `403 Forbidden` (access denied).
     # @return [Types::PutObjectAclOutput]
     def put(options = {})
       options = options.merge(
         bucket: @bucket_name,
         key: @object_key
       )
-      resp = @client.put_object_acl(options)
+      resp = Aws::Plugins::UserAgent.metric('RESOURCE_MODEL') do
+        @client.put_object_acl(options)
+      end
       resp.data
     end
 

data/lib/aws-sdk-s3/object_copier.rb

@@ -28,11 +28,13 @@ module Aws
         options[:bucket] = target_bucket
         options[:key] = target_key
         options[:copy_source] = copy_source(source)
-        if options.delete(:multipart_copy)
-          apply_source_client(source, options)
-          ObjectMultipartCopier.new(@options).copy(options)
-        else
-          @object.client.copy_object(options)
+        Aws::Plugins::UserAgent.metric('S3_TRANSFER') do
+          if options.delete(:multipart_copy)
+            apply_source_client(source, options)
+            ObjectMultipartCopier.new(@options).copy(options)
+          else
+            @object.client.copy_object(options)
+          end
         end
       end
 

data/lib/aws-sdk-s3/object_multipart_copier.rb

@@ -15,18 +15,21 @@ module Aws
       MAX_PARTS = 10_000
 
       # @option options [Client] :client
-      # @option [Integer] :min_part_size (52428800) Size of copied parts.
-      #   Defaults to 50MB.
-      #   will be constructed from the given `options' hash.
-      # @option [Integer] :thread_count (10) Number of concurrent threads to
-      #   use for copying parts.
+      # @option options [Integer] :min_part_size (52428800)
+      #   Size of copied parts. Defaults to 50MB.
+      # @option options [Integer] :thread_count (10) Number of concurrent
+      #   threads to use for copying parts.
+      # @option options [Boolean] :use_source_parts (false) Use part sizes
+      #   defined on the source object if any exist. If copying or moving an
+      #   object that is already multipart, this does not re-part the object,
+      #   instead re-using the part definitions on the original. That means
+      #   the etag and any checksums will not change. This is especially
+      #   useful if the source object has parts with varied sizes.
       def initialize(options = {})
+        @use_source_parts = options.delete(:use_source_parts) || false
         @thread_count = options.delete(:thread_count) || 10
         @min_part_size = options.delete(:min_part_size) || (FIVE_MB * 10)
         @client = options[:client] || Client.new
-        if options[:checksum_algorithm]
-          raise ArgumentError, 'Multipart Copy does not support setting :checksum_algorithm'
-        end
       end
 
       # @return [Client]
@@ -78,10 +81,9 @@ module Aws
       end
 
       def copy_part(part)
-        {
-          etag: @client.upload_part_copy(part).copy_part_result.etag,
-          part_number: part[:part_number],
-        }
+        @client.upload_part_copy(part).copy_part_result.to_h.merge({
+          part_number: part[:part_number]
+        }).tap { |result| result.delete(:last_modified) }
       end
 
       def complete_upload(parts, options)
@@ -104,28 +106,39 @@ module Aws
         parts = []
         options = options_for(:upload_part_copy, options)
         while offset < size
+          part_size = calculate_part_size(part_number, default_part_size, options)
           parts << options.merge({
             part_number: part_number,
-            copy_source_range: byte_range(offset, default_part_size, size),
+            copy_source_range: byte_range(offset, part_size, size),
           })
           part_number += 1
-          offset += default_part_size
+          offset += part_size
         end
         parts
       end
 
-      def byte_range(offset, default_part_size, size)
-        if offset + default_part_size < size
-          "bytes=#{offset}-#{offset + default_part_size - 1}"
+      def byte_range(offset, part_size, size)
+        if offset + part_size < size
+          "bytes=#{offset}-#{offset + part_size - 1}"
         else
           "bytes=#{offset}-#{size - 1}"
         end
       end
 
-      def source_metadata(options)
-        if options[:content_length]
-          return { content_length: options.delete(:content_length) }
+      def calculate_part_size(part_number, default_part_size, options)
+        if @use_source_parts && source_has_parts(options)
+          source_metadata(options.merge({ part_number: part_number }))[:content_length]
+        else
+          default_part_size
         end
+      end
+
+      def source_has_parts(options)
+        @source_has_parts ||= source_metadata(options.merge({ part_number: 1 }))[:parts_count]
+      end
+
+      def source_metadata(options)
+        return options.slice(:content_length) if options[:content_length]
 
         client = options[:copy_source_client] || @client
 
@@ -135,10 +148,15 @@ module Aws
           bucket, key = options[:copy_source].match(/([^\/]+?)\/(.+)/)[1,2]
         end
 
-        key = CGI.unescape(key)
-        opts = { bucket: bucket, key: key }
-        opts[:version_id] = version_id if version_id
-        client.head_object(opts).to_h
+        head_opts = { bucket: bucket, key: CGI.unescape(key) }.tap { |opts|
+          opts[:version_id]  = version_id if version_id
+          opts[:part_number] = options[:part_number] if options[:part_number]
+        }
+
+        client.head_object(head_opts).to_h.tap { |head|
+          head.delete(:server_side_encryption)
+          head.delete(:ssekms_key_id)
+        }
       end
 
       def default_part_size(source_size)