aws-sdk-s3 1.119.2 → 1.120.1

data/lib/aws-sdk-s3/client.rb

@@ -501,14 +501,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -596,10 +596,17 @@ module Aws::S3
     # minutes to complete. After Amazon S3 begins processing the request, it
     # sends an HTTP response header that specifies a 200 OK response. While
     # processing is in progress, Amazon S3 periodically sends white space
-    # characters to keep the connection from timing out. Because a request
-    # could fail after the initial 200 OK response has been sent, it is
-    # important that you check the response body to determine whether the
-    # request succeeded.
+    # characters to keep the connection from timing out. A request could
+    # fail after the initial 200 OK response has been sent. This means that
+    # a `200 OK` response can contain either a success or an error. If you
+    # call the S3 API directly, make sure to design your application to
+    # parse the contents of the response and handle it appropriately. If you
+    # use Amazon Web Services SDKs, SDKs handle this condition. The SDKs
+    # detect the embedded error and apply error handling per your
+    # configuration settings (including automatically retrying the request
+    # as appropriate). If the condition persists, the SDKs throws an
+    # exception (or, for the SDKs that don't use exceptions, they return
+    # the error).
     #
     # Note that if `CompleteMultipartUpload` fails, applications should be
     # prepared to retry the failed requests. For more information, see
@@ -683,14 +690,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -922,8 +929,14 @@ module Aws::S3
     # before the copy action starts, you receive a standard Amazon S3 error.
     # If the error occurs during the copy operation, the error response is
     # embedded in the `200 OK` response. This means that a `200 OK` response
-    # can contain either a success or an error. Design your application to
-    # parse the contents of the response and handle it appropriately.
+    # can contain either a success or an error. If you call the S3 API
+    # directly, make sure to design your application to parse the contents
+    # of the response and handle it appropriately. If you use Amazon Web
+    # Services SDKs, SDKs handle this condition. The SDKs detect the
+    # embedded error and apply error handling per your configuration
+    # settings (including automatically retrying the request as
+    # appropriate). If the condition persists, the SDKs throws an exception
+    # (or, for the SDKs that don't use exceptions, they return the error).
     #
     # If the copy is successful, you receive a response with information
     # about the copied object.
@@ -961,6 +974,11 @@ module Aws::S3
     # condition keys, see [Actions, Resources, and Condition Keys for Amazon
     # S3][7].
     #
+    # <note markdown="1"> `x-amz-website-redirect-location` is unique to each object and must be
+    # specified in the request headers to copy the value.
+    #
+    #  </note>
+    #
     # **x-amz-copy-source-if Headers**
     #
     # To only copy an object under certain conditions, such as whether the
@@ -1000,14 +1018,30 @@ module Aws::S3
     #
     # **Server-side encryption**
     #
-    # When you perform a CopyObject operation, you can optionally use the
-    # appropriate encryption-related headers to encrypt the object using
-    # server-side encryption with Amazon Web Services managed encryption
-    # keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With
-    # server-side encryption, Amazon S3 encrypts your data as it writes it
-    # to disks in its data centers and decrypts the data when you access it.
-    # For more information about server-side encryption, see [Using
-    # Server-Side Encryption][8].
+    # Amazon S3 automatically encrypts all new objects that are copied to an
+    # S3 bucket. When copying an object, if you don't specify encryption
+    # information in your copy request, the encryption setting of the target
+    # object is set to the default encryption configuration of the
+    # destination bucket. By default, all buckets have a base level of
+    # encryption configuration that uses server-side encryption with Amazon
+    # S3 managed keys (SSE-S3). If the destination bucket has a default
+    # encryption configuration that uses server-side encryption with an Key
+    # Management Service (KMS) key (SSE-KMS), or a customer-provided
+    # encryption key (SSE-C), Amazon S3 uses the corresponding KMS key, or a
+    # customer-provided key to encrypt the target object copy. When you
+    # perform a CopyObject operation, if you want to use a different type of
+    # encryption setting for the target object, you can use other
+    # appropriate encryption-related headers to encrypt the target object
+    # with a KMS key, an Amazon S3 managed key, or a customer-provided key.
+    # With server-side encryption, Amazon S3 encrypts your data as it writes
+    # it to disks in its data centers and decrypts the data when you access
+    # it. If the encryption setting in your request is different from the
+    # default encryption configuration of the destination bucket, the
+    # encryption setting in your request takes precedence. If the source
+    # object for the copy is stored in Amazon S3 using SSE-C, you must
+    # provide the necessary encryption information in your request so that
+    # Amazon S3 can decrypt the object for copying. For more information
+    # about server-side encryption, see [Using Server-Side Encryption][8].
     #
     # If a target object uses SSE-KMS, you can enable an S3 Bucket Key for
     # the object. For more information, see [Amazon S3 Bucket Keys][9] in
@@ -1119,14 +1153,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -1260,7 +1294,7 @@ module Aws::S3
     #
     # @option params [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing this object in
-    #   Amazon S3 (for example, AES256, aws:kms).
+    #   Amazon S3 (for example, AES256, `aws:kms`).
     #
     # @option params [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
@@ -1277,7 +1311,10 @@ module Aws::S3
     # @option params [String] :website_redirect_location
     #   If the bucket is configured as a website, redirects requests for this
     #   object to another object in the same bucket or to an external URL.
-    #   Amazon S3 stores the value of this header in the object metadata.
+    #   Amazon S3 stores the value of this header in the object metadata. This
+    #   value is unique to each object and is not copied when using the
+    #   `x-amz-metadata-directive` header. Instead, you may opt to provide
+    #   this header in combination with the directive.
     #
     # @option params [String] :sse_customer_algorithm
     #   Specifies the algorithm to use to when encrypting the object (for
@@ -1774,22 +1811,42 @@ module Aws::S3
     #
     #  </note>
     #
-    # You can optionally request server-side encryption. For server-side
-    # encryption, Amazon S3 encrypts your data as it writes it to disks in
-    # its data centers and decrypts it when you access it. You can provide
-    # your own encryption key, or use Amazon Web Services KMS keys or Amazon
-    # S3-managed encryption keys. If you choose to provide your own
-    # encryption key, the request headers you provide in [UploadPart][1] and
-    # [UploadPartCopy][6] requests must match the headers you used in the
-    # request to initiate the upload by using `CreateMultipartUpload`.
-    #
-    # To perform a multipart upload with encryption using an Amazon Web
+    # Server-side encryption is for data encryption at rest. Amazon S3
+    # encrypts your data as it writes it to disks in its data centers and
+    # decrypts it when you access it. Amazon S3 automatically encrypts all
+    # new objects that are uploaded to an S3 bucket. When doing a multipart
+    # upload, if you don't specify encryption information in your request,
+    # the encryption setting of the uploaded parts is set to the default
+    # encryption configuration of the destination bucket. By default, all
+    # buckets have a base level of encryption configuration that uses
+    # server-side encryption with Amazon S3 managed keys (SSE-S3). If the
+    # destination bucket has a default encryption configuration that uses
+    # server-side encryption with an Key Management Service (KMS) key
+    # (SSE-KMS), or a customer-provided encryption key (SSE-C), Amazon S3
+    # uses the corresponding KMS key, or a customer-provided key to encrypt
+    # the uploaded parts. When you perform a CreateMultipartUpload
+    # operation, if you want to use a different type of encryption setting
+    # for the uploaded parts, you can request that Amazon S3 encrypts the
+    # object with a KMS key, an Amazon S3 managed key, or a
+    # customer-provided key. If the encryption setting in your request is
+    # different from the default encryption configuration of the destination
+    # bucket, the encryption setting in your request takes precedence. If
+    # you choose to provide your own encryption key, the request headers you
+    # provide in [UploadPart][1] and [UploadPartCopy][6] requests must match
+    # the headers you used in the request to initiate the upload by using
+    # `CreateMultipartUpload`. you can request that Amazon S3 save the
+    # uploaded parts encrypted with server-side encryption with an Amazon S3
+    # managed key (SSE-S3), an Key Management Service (KMS) key (SSE-KMS),
+    # or a customer-provided encryption key (SSE-C).
+    #
+    # To perform a multipart upload with encryption by using an Amazon Web
     # Services KMS key, the requester must have permission to the
     # `kms:Decrypt` and `kms:GenerateDataKey*` actions on the key. These
     # permissions are required because Amazon S3 must decrypt and read data
     # from the encrypted file parts before it completes the multipart
     # upload. For more information, see [Multipart upload API and
-    # permissions][7] in the *Amazon S3 User Guide*.
+    # permissions][7] and [Protecting data using server-side encryption with
+    # Amazon Web Services KMS][8] in the *Amazon S3 User Guide*.
     #
     # If your Identity and Access Management (IAM) user or role is in the
     # same Amazon Web Services account as the KMS key, then you must have
@@ -1798,7 +1855,7 @@ module Aws::S3
     # permissions on both the key policy and your IAM user or role.
     #
     # For more information, see [Protecting Data Using Server-Side
-    # Encryption][8].
+    # Encryption][9].
     #
     # Access Permissions
     #
@@ -1808,31 +1865,33 @@ module Aws::S3
     #   request headers:
     #
     #   * Specify a canned ACL with the `x-amz-acl` request header. For more
-    #     information, see [Canned ACL][9].
+    #     information, see [Canned ACL][10].
     #
     #   * Specify access permissions explicitly with the `x-amz-grant-read`,
     #     `x-amz-grant-read-acp`, `x-amz-grant-write-acp`, and
     #     `x-amz-grant-full-control` headers. These parameters map to the
     #     set of permissions that Amazon S3 supports in an ACL. For more
-    #     information, see [Access Control List (ACL) Overview][10].
+    #     information, see [Access Control List (ACL) Overview][11].
     #
     #   You can use either a canned ACL or specify access permissions
     #   explicitly. You cannot do both.
     #
     # Server-Side- Encryption-Specific Request Headers
     #
-    # : You can optionally tell Amazon S3 to encrypt data at rest using
-    #   server-side encryption. Server-side encryption is for data
-    #   encryption at rest. Amazon S3 encrypts your data as it writes it to
-    #   disks in its data centers and decrypts it when you access it. The
-    #   option you use depends on whether you want to use Amazon Web
-    #   Services managed encryption keys or provide your own encryption key.
-    #
-    #   * Use encryption keys managed by Amazon S3 or customer managed key
-    #     stored in Amazon Web Services Key Management Service (Amazon Web
-    #     Services KMS) – If you want Amazon Web Services to manage the keys
-    #     used to encrypt data, specify the following headers in the
-    #     request.
+    # : Amazon S3 encrypts data by using server-side encryption with an
+    #   Amazon S3 managed key (SSE-S3) by default. Server-side encryption is
+    #   for data encryption at rest. Amazon S3 encrypts your data as it
+    #   writes it to disks in its data centers and decrypts it when you
+    #   access it. You can request that Amazon S3 encrypts data at rest by
+    #   using server-side encryption with other key options. The option you
+    #   use depends on whether you want to use KMS keys (SSE-KMS) or provide
+    #   your own encryption keys (SSE-C).
+    #
+    #   * Use KMS keys (SSE-KMS) that include the Amazon Web Services
+    #     managed key (`aws/s3`) and KMS customer managed keys stored in Key
+    #     Management Service (KMS) – If you want Amazon Web Services to
+    #     manage the keys used to encrypt data, specify the following
+    #     headers in the request.
     #
     #     * `x-amz-server-side-encryption`
     #
@@ -1842,22 +1901,22 @@ module Aws::S3
     #
     #     <note markdown="1"> If you specify `x-amz-server-side-encryption:aws:kms`, but don't
     #     provide `x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3
-    #     uses the Amazon Web Services managed key in Amazon Web Services
-    #     KMS to protect the data.
+    #     uses the Amazon Web Services managed key (`aws/s3` key) in KMS to
+    #     protect the data.
     #
     #      </note>
     #
-    #     All GET and PUT requests for an object protected by Amazon Web
-    #     Services KMS fail if you don't make them with SSL or by using
-    #     SigV4.
+    #     All `GET` and `PUT` requests for an object protected by KMS fail
+    #     if you don't make them by using Secure Sockets Layer (SSL),
+    #     Transport Layer Security (TLS), or Signature Version 4.
     #
-    #     For more information about server-side encryption with KMS key
+    #     For more information about server-side encryption with KMS keys
     #     (SSE-KMS), see [Protecting Data Using Server-Side Encryption with
-    #     KMS keys][11].
+    #     KMS keys][8].
     #
-    #   * Use customer-provided encryption keys – If you want to manage your
-    #     own encryption keys, provide all the following headers in the
-    #     request.
+    #   * Use customer-provided encryption keys (SSE-C) – If you want to
+    #     manage your own encryption keys, provide all the following headers
+    #     in the request.
     #
     #     * `x-amz-server-side-encryption-customer-algorithm`
     #
@@ -1865,9 +1924,10 @@ module Aws::S3
     #
     #     * `x-amz-server-side-encryption-customer-key-MD5`
     #
-    #     For more information about server-side encryption with KMS keys
-    #     (SSE-KMS), see [Protecting Data Using Server-Side Encryption with
-    #     KMS keys][11].
+    #     For more information about server-side encryption with
+    #     customer-provided encryption keys (SSE-C), see [ Protecting data
+    #     using server-side encryption with customer-provided encryption
+    #     keys (SSE-C)][12].
     #
     # Access-Control-List (ACL)-Specific Request Headers
     #
@@ -1877,19 +1937,19 @@ module Aws::S3
     #   permissions to individual Amazon Web Services accounts or to
     #   predefined groups defined by Amazon S3. These permissions are then
     #   added to the access control list (ACL) on the object. For more
-    #   information, see [Using ACLs][12]. With this operation, you can
+    #   information, see [Using ACLs][13]. With this operation, you can
     #   grant access permissions using one of the following two methods:
     #
     #   * Specify a canned ACL (`x-amz-acl`) — Amazon S3 supports a set of
     #     predefined ACLs, known as *canned ACLs*. Each canned ACL has a
     #     predefined set of grantees and permissions. For more information,
-    #     see [Canned ACL][9].
+    #     see [Canned ACL][10].
     #
     #   * Specify access permissions explicitly — To explicitly grant access
     #     permissions to specific Amazon Web Services accounts or groups,
     #     use the following headers. Each header maps to specific
     #     permissions that Amazon S3 supports in an ACL. For more
-    #     information, see [Access Control List (ACL) Overview][10]. In the
+    #     information, see [Access Control List (ACL) Overview][11]. In the
     #     header, you specify a list of grantees who get the specific
     #     permission. To grant permissions explicitly, use:
     #
@@ -1934,7 +1994,7 @@ module Aws::S3
     #       * South America (São Paulo)
     #
     #        For a list of all the Amazon S3 supported Regions and endpoints,
-    #       see [Regions and Endpoints][13] in the Amazon Web Services
+    #       see [Regions and Endpoints][14] in the Amazon Web Services
     #       General Reference.
     #
     #        </note>
@@ -1949,13 +2009,13 @@ module Aws::S3
     #
     # * [UploadPart][1]
     #
-    # * [CompleteMultipartUpload][14]
+    # * [CompleteMultipartUpload][15]
     #
-    # * [AbortMultipartUpload][15]
+    # * [AbortMultipartUpload][16]
     #
-    # * [ListParts][16]
+    # * [ListParts][17]
     #
-    # * [ListMultipartUploads][17]
+    # * [ListMultipartUploads][18]
     #
     #
     #
@@ -1966,16 +2026,17 @@ module Aws::S3
     # [5]: https://docs.aws.amazon.com/AmazonS3/latest/API/sig-v4-authenticating-requests.html
     # [6]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html
     # [7]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/mpuoverview.html#mpuAndPermissions
-    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
-    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL
-    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html
-    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html
-    # [12]: https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html
-    # [13]: https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region
-    # [14]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CompleteMultipartUpload.html
-    # [15]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html
-    # [16]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html
-    # [17]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListMultipartUploads.html
+    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html
+    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
+    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#CannedACL
+    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html
+    # [12]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/ServerSideEncryptionCustomerKeys.html
+    # [13]: https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html
+    # [14]: https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region
+    # [15]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CompleteMultipartUpload.html
+    # [16]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html
+    # [17]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html
+    # [18]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListMultipartUploads.html
     #
     # @option params [String] :acl
     #   The canned ACL to apply to the object.
@@ -1993,14 +2054,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2056,7 +2117,7 @@ module Aws::S3
     #
     # @option params [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing this object in
-    #   Amazon S3 (for example, AES256, aws:kms).
+    #   Amazon S3 (for example, AES256, `aws:kms`).
     #
     # @option params [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
@@ -2092,13 +2153,13 @@ module Aws::S3
     #   ensure that the encryption key was transmitted without error.
     #
     # @option params [String] :ssekms_key_id
-    #   Specifies the ID of the symmetric customer managed key to use for
-    #   object encryption. All GET and PUT requests for an object protected by
-    #   Amazon Web Services KMS will fail if not made via SSL or using SigV4.
-    #   For information about configuring using any of the officially
-    #   supported Amazon Web Services SDKs and Amazon Web Services CLI, see
-    #   [Specifying the Signature Version in Request Authentication][1] in the
-    #   *Amazon S3 User Guide*.
+    #   Specifies the ID of the symmetric encryption customer managed key to
+    #   use for object encryption. All GET and PUT requests for an object
+    #   protected by Amazon Web Services KMS will fail if not made via SSL or
+    #   using SigV4. For information about configuring using any of the
+    #   officially supported Amazon Web Services SDKs and Amazon Web Services
+    #   CLI, see [Specifying the Signature Version in Request
+    #   Authentication][1] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -2421,10 +2482,11 @@ module Aws::S3
       req.send_request(options)
     end
 
-    # This implementation of the DELETE action removes default encryption
-    # from the bucket. For information about the Amazon S3 default
-    # encryption feature, see [Amazon S3 Default Bucket Encryption][1] in
-    # the *Amazon S3 User Guide*.
+    # This implementation of the DELETE action resets the default encryption
+    # for the bucket as server-side encryption with Amazon S3 managed keys
+    # (SSE-S3). For information about the bucket default encryption feature,
+    # see [Amazon S3 Bucket Default Encryption][1] in the *Amazon S3 User
+    # Guide*.
     #
     # To use this operation, you must have permissions to perform the
     # `s3:PutEncryptionConfiguration` action. The bucket owner has this
@@ -2701,7 +2763,9 @@ module Aws::S3
     #   The name of the bucket containing the metrics configuration to delete.
     #
     # @option params [required, String] :id
-    #   The ID used to identify the metrics configuration.
+    #   The ID used to identify the metrics configuration. The ID has a 64
+    #   character limit and can only contain letters, numbers, periods,
+    #   dashes, and underscores.
     #
     # @option params [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
@@ -3027,11 +3091,10 @@ module Aws::S3
     # there isn't a null version, Amazon S3 does not remove any objects but
     # will still respond that the command was successful.
     #
-    # To remove a specific version, you must be the bucket owner and you
-    # must use the version Id subresource. Using this subresource
-    # permanently deletes the version. If the object deleted is a delete
-    # marker, Amazon S3 sets the response header, `x-amz-delete-marker`, to
-    # true.
+    # To remove a specific version, you must use the version Id subresource.
+    # Using this subresource permanently deletes the version. If the object
+    # deleted is a delete marker, Amazon S3 sets the response header,
+    # `x-amz-delete-marker`, to true.
     #
     # If the object you want to delete is in a bucket where the bucket
     # versioning configuration is MFA Delete enabled, you must include the
@@ -3072,14 +3135,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -3185,8 +3248,7 @@ module Aws::S3
     # parameter in the request. You will need permission for the
     # `s3:DeleteObjectVersionTagging` action.
     #
-    # The following operations are related to
-    # `DeleteBucketMetricsConfiguration`:
+    # The following operations are related to `DeleteObjectTagging`:
     #
     # * [PutObjectTagging][2]
     #
@@ -3209,14 +3271,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -3240,35 +3302,35 @@ module Aws::S3
     #   * {Types::DeleteObjectTaggingOutput#version_id #version_id} => String
     #
     #
-    # @example Example: To remove tag set from an object
+    # @example Example: To remove tag set from an object version
     #
-    #   # The following example removes tag set associated with the specified object. If the bucket is versioning enabled, the
-    #   # operation removes tag set from the latest object version.
+    #   # The following example removes tag set associated with the specified object version. The request specifies both the
+    #   # object key and object version.
     #
     #   resp = client.delete_object_tagging({
     #     bucket: "examplebucket", 
     #     key: "HappyFace.jpg", 
+    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
-    #     version_id: "null", 
+    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
     #   }
     #
-    # @example Example: To remove tag set from an object version
+    # @example Example: To remove tag set from an object
     #
-    #   # The following example removes tag set associated with the specified object version. The request specifies both the
-    #   # object key and object version.
+    #   # The following example removes tag set associated with the specified object. If the bucket is versioning enabled, the
+    #   # operation removes tag set from the latest object version.
     #
     #   resp = client.delete_object_tagging({
     #     bucket: "examplebucket", 
     #     key: "HappyFace.jpg", 
-    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
-    #     version_id: "ydlaNkwWm0SfKJR.T1b1fIdPRbldTYRI", 
+    #     version_id: "null", 
     #   }
     #
     # @example Request syntax with placeholder values
@@ -3357,14 +3419,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -3673,6 +3735,9 @@ module Aws::S3
     # can return the ACL of the bucket without using an authorization
     # header.
     #
+    # To use this API against an access point, provide the alias of the
+    # access point in place of the bucket name.
+    #
     # <note markdown="1"> If your bucket uses the bucket owner enforced setting for S3 Object
     # Ownership, requests to read ACLs are still supported and return the
     # `bucket-owner-full-control` ACL with the owner being the account that
@@ -3821,6 +3886,9 @@ module Aws::S3
     # `s3:GetBucketCORS` action. By default, the bucket owner has this
     # permission and can grant it to others.
     #
+    # To use this API against an access point, provide the alias of the
+    # access point in place of the bucket name.
+    #
     # For more information about CORS, see [ Enabling Cross-Origin Resource
     # Sharing][1].
     #
@@ -3906,12 +3974,10 @@ module Aws::S3
     end
 
     # Returns the default encryption configuration for an Amazon S3 bucket.
-    # If the bucket does not have a default encryption configuration,
-    # GetBucketEncryption returns
-    # `ServerSideEncryptionConfigurationNotFoundError`.
-    #
-    # For information about the Amazon S3 default encryption feature, see
-    # [Amazon S3 Default Bucket Encryption][1].
+    # By default, all buckets have a default encryption configuration that
+    # uses server-side encryption with Amazon S3 managed keys (SSE-S3). For
+    # information about the bucket default encryption feature, see [Amazon
+    # S3 Bucket Default Encryption][1] in the *Amazon S3 User Guide*.
     #
     # To use this operation, you must have permission to perform the
     # `s3:GetEncryptionConfiguration` action. The bucket owner has this
@@ -4389,16 +4455,23 @@ module Aws::S3
     # To use this API against an access point, provide the alias of the
     # access point in place of the bucket name.
     #
+    # <note markdown="1"> For requests made using Amazon Web Services Signature Version 4
+    # (SigV4), we recommend that you use [HeadBucket][2] to return the
+    # bucket Region instead of GetBucketLocation.
+    #
+    #  </note>
+    #
     # The following operations are related to `GetBucketLocation`:
     #
-    # * [GetObject][2]
+    # * [GetObject][3]
     #
     # * [CreateBucket][1]
     #
     #
     #
     # [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateBucket.html
-    # [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
+    # [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html
+    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
     #
     # @option params [required, String] :bucket
     #   The name of the bucket for which to get the location.
@@ -4447,8 +4520,7 @@ module Aws::S3
     end
 
     # Returns the logging status of a bucket and the permissions users have
-    # to view and modify that status. To use GET, you must be the bucket
-    # owner.
+    # to view and modify that status.
     #
     # The following operations are related to `GetBucketLogging`:
     #
@@ -4540,7 +4612,9 @@ module Aws::S3
     #   retrieve.
     #
     # @option params [required, String] :id
-    #   The ID used to identify the metrics configuration.
+    #   The ID used to identify the metrics configuration. The ID has a 64
+    #   character limit and can only contain letters, numbers, periods,
+    #   dashes, and underscores.
     #
     # @option params [String] :expected_bucket_owner
     #   The account ID of the expected bucket owner. If the bucket is owned by
@@ -4704,6 +4778,9 @@ module Aws::S3
     # policy to grant permission to other users to read this configuration
     # with the `s3:GetBucketNotification` permission.
     #
+    # To use this API against an access point, provide the alias of the
+    # access point in place of the bucket name.
+    #
     # For more information about setting and reading the notification
     # configuration on a bucket, see [Setting Up Notification of Bucket
     # Events][1]. For more information about bucket policies, see [Using
@@ -4849,6 +4926,9 @@ module Aws::S3
     # policy explicitly denies the root user the ability to perform this
     # action.
     #
+    # To use this API against an access point, provide the alias of the
+    # access point in place of the bucket name.
+    #
     # For more information about bucket policies, see [Using Bucket Policies
     # and User Policies][1].
     #
@@ -5421,7 +5501,7 @@ module Aws::S3
     # Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive
     # or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve
     # the object you must first restore a copy using [RestoreObject][3].
-    # Otherwise, this action returns an `InvalidObjectStateError` error. For
+    # Otherwise, this action returns an `InvalidObjectState` error. For
     # information about restoring archived objects, see [Restoring Archived
     # Objects][4].
     #
@@ -5473,7 +5553,9 @@ module Aws::S3
     # <note markdown="1"> * If you supply a `versionId`, you need the `s3:GetObjectVersion`
     #   permission to access a specific version of an object. If you request
     #   a specific version, you do not need to have the `s3:GetObject`
-    #   permission.
+    #   permission. If you request the current version without a specific
+    #   version ID, only `s3:GetObject` permission is required.
+    #   `s3:GetObjectVersion` permission won't be required.
     #
     # * If the current version of the object is a delete marker, Amazon S3
     #   behaves as if the object was deleted and includes
@@ -5568,14 +5650,14 @@ module Aws::S3
     #   When using an Object Lambda access point the hostname takes the form
     #   *AccessPointName*-*AccountId*.s3-object-lambda.*Region*.amazonaws.com.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -5604,7 +5686,7 @@ module Aws::S3
     # @option params [String] :range
     #   Downloads the specified range bytes of an object. For more information
     #   about the HTTP Range header, see
-    #   [https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35][1].
+    #   [https://www.rfc-editor.org/rfc/rfc9110.html#name-range][1].
     #
     #   <note markdown="1"> Amazon S3 doesn't support retrieving multiple ranges of data per
     #   `GET` request.
@@ -5613,7 +5695,7 @@ module Aws::S3
     #
     #
     #
-    #   [1]: https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35
+    #   [1]: https://www.rfc-editor.org/rfc/rfc9110.html#name-range
     #
     # @option params [String] :response_cache_control
     #   Sets the `Cache-Control` header of the response.
@@ -5718,49 +5800,49 @@ module Aws::S3
     #   * {Types::GetObjectOutput#object_lock_legal_hold_status #object_lock_legal_hold_status} => String
     #
     #
-    # @example Example: To retrieve a byte range of an object 
+    # @example Example: To retrieve an object
     #
-    #   # The following example retrieves an object for an S3 bucket. The request specifies the range header to retrieve a
-    #   # specific byte range.
+    #   # The following example retrieves an object for an S3 bucket.
     #
     #   resp = client.get_object({
     #     bucket: "examplebucket", 
-    #     key: "SampleFile.txt", 
-    #     range: "bytes=0-9", 
+    #     key: "HappyFace.jpg", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     accept_ranges: "bytes", 
-    #     content_length: 10, 
-    #     content_range: "bytes 0-9/43", 
-    #     content_type: "text/plain", 
-    #     etag: "\"0d94420ffd0bc68cd3d152506b97a9cc\"", 
-    #     last_modified: Time.parse("Thu, 09 Oct 2014 22:57:28 GMT"), 
+    #     content_length: 3191, 
+    #     content_type: "image/jpeg", 
+    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
+    #     last_modified: Time.parse("Thu, 15 Dec 2016 01:19:41 GMT"), 
     #     metadata: {
     #     }, 
+    #     tag_count: 2, 
     #     version_id: "null", 
     #   }
     #
-    # @example Example: To retrieve an object
+    # @example Example: To retrieve a byte range of an object 
     #
-    #   # The following example retrieves an object for an S3 bucket.
+    #   # The following example retrieves an object for an S3 bucket. The request specifies the range header to retrieve a
+    #   # specific byte range.
     #
     #   resp = client.get_object({
     #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
+    #     key: "SampleFile.txt", 
+    #     range: "bytes=0-9", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     accept_ranges: "bytes", 
-    #     content_length: 3191, 
-    #     content_type: "image/jpeg", 
-    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     last_modified: Time.parse("Thu, 15 Dec 2016 01:19:41 GMT"), 
+    #     content_length: 10, 
+    #     content_range: "bytes 0-9/43", 
+    #     content_type: "text/plain", 
+    #     etag: "\"0d94420ffd0bc68cd3d152506b97a9cc\"", 
+    #     last_modified: Time.parse("Thu, 09 Oct 2014 22:57:28 GMT"), 
     #     metadata: {
     #     }, 
-    #     tag_count: 2, 
     #     version_id: "null", 
     #   }
     #
@@ -6043,9 +6125,7 @@ module Aws::S3
     # object's metadata. To use `GetObjectAttributes`, you must have READ
     # access to the object.
     #
-    # `GetObjectAttributes` combines the functionality of `GetObjectAcl`,
-    # `GetObjectLegalHold`, `GetObjectLockConfiguration`,
-    # `GetObjectRetention`, `GetObjectTagging`, `HeadObject`, and
+    # `GetObjectAttributes` combines the functionality of `HeadObject` and
     # `ListParts`. All of the data returned with each of those individual
     # calls can be returned with a single call to `GetObjectAttributes`.
     #
@@ -6067,9 +6147,8 @@ module Aws::S3
     #   should not be sent for GET requests if your object uses server-side
     #   encryption with Amazon Web Services KMS keys stored in Amazon Web
     #   Services Key Management Service (SSE-KMS) or server-side encryption
-    #   with Amazon S3 managed encryption keys (SSE-S3). If your object does
-    #   use these types of keys, you'll get an HTTP `400 Bad Request`
-    #   error.
+    #   with Amazon S3 managed keys (SSE-S3). If your object does use these
+    #   types of keys, you'll get an HTTP `400 Bad Request` error.
     #
     # * The last modified property in this case is the creation date of the
     #   object.
@@ -6157,14 +6236,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -6557,14 +6636,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -6671,8 +6750,7 @@ module Aws::S3
     end
 
     # Returns torrent files from a bucket. BitTorrent can save you bandwidth
-    # when you're distributing large files. For more information about
-    # BitTorrent, see [Using BitTorrent with Amazon S3][1].
+    # when you're distributing large files.
     #
     # <note markdown="1"> You can get torrent only for objects that are less than 5 GB in size,
     # and that are not encrypted using server-side encryption with a
@@ -6686,14 +6764,13 @@ module Aws::S3
     #
     # The following action is related to `GetObjectTorrent`:
     #
-    # * [GetObject][2]
+    # * [GetObject][1]
     #
     # ^
     #
     #
     #
-    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/S3Torrent.html
-    # [2]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
     #
     # @option params [String, IO] :response_target
     #   Where to write response data, file path, or IO object.
@@ -6839,9 +6916,9 @@ module Aws::S3
     # exists and you have permission to access it.
     #
     # If the bucket does not exist or you do not have permission to access
-    # it, the `HEAD` request returns a generic `404 Not Found` or `403
-    # Forbidden` code. A message body is not included, so you cannot
-    # determine the exception beyond these error codes.
+    # it, the `HEAD` request returns a generic `400 Bad Request`, `403
+    # Forbidden` or `404 Not Found` code. A message body is not included, so
+    # you cannot determine the exception beyond these error codes.
     #
     # To use this operation, you must have permissions to perform the
     # `s3:ListBucket` action. The bucket owner has this permission by
@@ -6875,14 +6952,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -6935,9 +7012,9 @@ module Aws::S3
     # A `HEAD` request has the same options as a `GET` action on an object.
     # The response is identical to the `GET` response except that there is
     # no response body. Because of this, if the `HEAD` request generates an
-    # error, it returns a generic `404 Not Found` or `403 Forbidden` code.
-    # It is not possible to retrieve the exact exception beyond these error
-    # codes.
+    # error, it returns a generic `400 Bad Request`, `403 Forbidden` or `404
+    # Not Found` code. It is not possible to retrieve the exact exception
+    # beyond these error codes.
     #
     # If you encrypt an object by using server-side encryption with
     # customer-provided encryption keys (SSE-C) when you store the object in
@@ -7029,14 +7106,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -7063,8 +7140,10 @@ module Aws::S3
     #   The object key.
     #
     # @option params [String] :range
-    #   Because `HeadObject` returns only the metadata for an object, this
-    #   parameter has no effect.
+    #   HeadObject returns only the metadata for an object. If the Range is
+    #   satisfiable, only the `ContentLength` is affected in the response. If
+    #   the Range is not satisfiable, S3 returns a `416 - Requested Range Not
+    #   Satisfiable` error.
     #
     # @option params [String] :version_id
     #   VersionId used to reference a specific version of the object.
@@ -7634,17 +7713,22 @@ module Aws::S3
     # request. To use this operation, you must have the
     # `s3:ListAllMyBuckets` permission.
     #
+    # For information about Amazon S3 buckets, see [Creating, configuring,
+    # and working with Amazon S3 buckets][1].
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/creating-buckets-s3.html
+    #
     # @return [Types::ListBucketsOutput] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
     #   * {Types::ListBucketsOutput#buckets #buckets} => Array&lt;Types::Bucket&gt;
     #   * {Types::ListBucketsOutput#owner #owner} => Types::Owner
     #
     #
-    # @example Example: To list object versions
+    # @example Example: To list all buckets
     #
-    #   # The following example return versions of an object with specific key name prefix. The request limits the number of items
-    #   # returned to two. If there are are more than two object version, S3 returns NextToken in the response. You can specify
-    #   # this token value in your next request to fetch next set of object versions.
+    #   # The following example returns all the buckets owned by the sender of this request.
     #
     #   resp = client.list_buckets({
     #   })
@@ -7653,15 +7737,15 @@ module Aws::S3
     #   {
     #     buckets: [
     #       {
-    #         creation_date: Time.parse("2012-02-15T21: 03: 02.000Z"), 
+    #         creation_date: Time.parse("2012-02-15T21:03:02.000Z"), 
     #         name: "examplebucket", 
     #       }, 
     #       {
-    #         creation_date: Time.parse("2011-07-24T19: 33: 50.000Z"), 
+    #         creation_date: Time.parse("2011-07-24T19:33:50.000Z"), 
     #         name: "examplebucket2", 
     #       }, 
     #       {
-    #         creation_date: Time.parse("2010-12-17T00: 56: 49.000Z"), 
+    #         creation_date: Time.parse("2010-12-17T00:56:49.000Z"), 
     #         name: "examplebucket3", 
     #       }, 
     #     ], 
@@ -7747,14 +7831,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8215,14 +8299,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8417,14 +8501,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -8494,7 +8578,7 @@ module Aws::S3
     #   # keys. 
     #
     #   resp = client.list_objects_v2({
-    #     bucket: "examplebucket", 
+    #     bucket: "DOC-EXAMPLE-BUCKET", 
     #     max_keys: 2, 
     #   })
     #
@@ -8519,7 +8603,7 @@ module Aws::S3
     #     is_truncated: true, 
     #     key_count: 2, 
     #     max_keys: 2, 
-    #     name: "examplebucket", 
+    #     name: "DOC-EXAMPLE-BUCKET", 
     #     next_continuation_token: "1w41l63U0xa8q7smH50vCxyTQqdxo69O3EmK28Bi5PcROI4wI/EyIJg==", 
     #     prefix: "", 
     #   }
@@ -8632,14 +8716,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -9030,7 +9114,7 @@ module Aws::S3
     # * By Email address:
     #
     #   `<Grantee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    #   xsi:type="AmazonCustomerByEmail"><EmailAddress><>Grantees@email.com<></EmailAddress>lt;/Grantee>`
+    #   xsi:type="AmazonCustomerByEmail"><EmailAddress><>Grantees@email.com<></EmailAddress>&</Grantee>`
     #
     #   The grantee is resolved to the CanonicalUser and, in a response to a
     #   GET Object acl request, appears as the CanonicalUser.
@@ -9508,18 +9592,18 @@ module Aws::S3
     end
 
     # This action uses the `encryption` subresource to configure default
-    # encryption and Amazon S3 Bucket Key for an existing bucket.
-    #
-    # Default encryption for a bucket can use server-side encryption with
-    # Amazon S3-managed keys (SSE-S3) or customer managed keys (SSE-KMS). If
-    # you specify default encryption using SSE-KMS, you can also configure
-    # Amazon S3 Bucket Key. When the default encryption is SSE-KMS, if you
-    # upload an object to the bucket and do not specify the KMS key to use
-    # for encryption, Amazon S3 uses the default Amazon Web Services managed
-    # KMS key for your account. For information about default encryption,
-    # see [Amazon S3 default bucket encryption][1] in the *Amazon S3 User
-    # Guide*. For more information about S3 Bucket Keys, see [Amazon S3
-    # Bucket Keys][2] in the *Amazon S3 User Guide*.
+    # encryption and Amazon S3 Bucket Keys for an existing bucket.
+    #
+    # By default, all buckets have a default encryption configuration that
+    # uses server-side encryption with Amazon S3 managed keys (SSE-S3). You
+    # can optionally configure default encryption for a bucket by using
+    # server-side encryption with an Amazon Web Services KMS key (SSE-KMS)
+    # or a customer-provided key (SSE-C). If you specify default encryption
+    # by using SSE-KMS, you can also configure Amazon S3 Bucket Keys. For
+    # information about bucket default encryption, see [Amazon S3 bucket
+    # default encryption][1] in the *Amazon S3 User Guide*. For more
+    # information about S3 Bucket Keys, see [Amazon S3 Bucket Keys][2] in
+    # the *Amazon S3 User Guide*.
     #
     # This action requires Amazon Web Services Signature Version 4. For more
     # information, see [ Authenticating Requests (Amazon Web Services
@@ -9530,8 +9614,8 @@ module Aws::S3
     # permission by default. The bucket owner can grant this permission to
     # others. For more information about permissions, see [Permissions
     # Related to Bucket Subresource Operations][4] and [Managing Access
-    # Permissions to Your Amazon S3 Resources][5] in the Amazon S3 User
-    # Guide.
+    # Permissions to Your Amazon S3 Resources][5] in the *Amazon S3 User
+    # Guide*.
     #
     # **Related Resources**
     #
@@ -9551,10 +9635,13 @@ module Aws::S3
     #
     # @option params [required, String] :bucket
     #   Specifies default encryption for a bucket using server-side encryption
-    #   with Amazon S3-managed keys (SSE-S3) or customer managed keys
-    #   (SSE-KMS). For information about the Amazon S3 default encryption
-    #   feature, see [Amazon S3 Default Bucket Encryption][1] in the *Amazon
-    #   S3 User Guide*.
+    #   with different key options. By default, all buckets have a default
+    #   encryption configuration that uses server-side encryption with Amazon
+    #   S3 managed keys (SSE-S3). You can optionally configure default
+    #   encryption for a bucket by using server-side encryption with an Amazon
+    #   Web Services KMS key (SSE-KMS) or a customer-provided key (SSE-C). For
+    #   information about the bucket default encryption feature, see [Amazon
+    #   S3 Bucket Default Encryption][1] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -9768,12 +9855,26 @@ module Aws::S3
     # location. For an example policy, see [ Granting Permissions for Amazon
     # S3 Inventory and Storage Class Analysis][2].
     #
-    # To use this operation, you must have permissions to perform the
+    # **Permissions**
+    #
+    # To use this operation, you must have permission to perform the
     # `s3:PutInventoryConfiguration` action. The bucket owner has this
-    # permission by default and can grant this permission to others. For
-    # more information about permissions, see [Permissions Related to Bucket
-    # Subresource Operations][3] and [Managing Access Permissions to Your
-    # Amazon S3 Resources][4] in the Amazon S3 User Guide.
+    # permission by default and can grant this permission to others.
+    #
+    # The `s3:PutInventoryConfiguration` permission allows a user to create
+    # an [S3 Inventory][3] report that includes all object metadata fields
+    # available and to specify the destination bucket to store the
+    # inventory. A user with read access to objects in the destination
+    # bucket can also access all object metadata fields that are available
+    # in the inventory report.
+    #
+    # To restrict access to an inventory report, see [Restricting access to
+    # an Amazon S3 Inventory report][4] in the *Amazon S3 User Guide*. For
+    # more information about the metadata fields available in S3 Inventory,
+    # see [Amazon S3 Inventory lists][5] in the *Amazon S3 User Guide*. For
+    # more information about permissions, see [Permissions related to bucket
+    # subresource operations][6] and [Identity and access management in
+    # Amazon S3][7] in the *Amazon S3 User Guide*.
     #
     # **Special Errors**
     #
@@ -9800,21 +9901,24 @@ module Aws::S3
     #
     # **Related Resources**
     #
-    # * [GetBucketInventoryConfiguration][5]
+    # * [GetBucketInventoryConfiguration][8]
     #
-    # * [DeleteBucketInventoryConfiguration][6]
+    # * [DeleteBucketInventoryConfiguration][9]
     #
-    # * [ListBucketInventoryConfigurations][7]
+    # * [ListBucketInventoryConfigurations][10]
     #
     #
     #
     # [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-inventory.html
     # [2]: https://docs.aws.amazon.com/AmazonS3/latest/dev/example-bucket-policies.html#example-bucket-policies-use-case-9
-    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources
-    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-access-control.html
-    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketInventoryConfiguration.html
-    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeleteBucketInventoryConfiguration.html
-    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListBucketInventoryConfigurations.html
+    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/storage-inventory.html
+    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/example-bucket-policies.html#example-bucket-policies-use-case-10
+    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/storage-inventory.html#storage-inventory-contents
+    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources
+    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-access-control.html
+    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketInventoryConfiguration.html
+    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeleteBucketInventoryConfiguration.html
+    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListBucketInventoryConfigurations.html
     #
     # @option params [required, String] :bucket
     #   The name of the bucket where the inventory configuration will be
@@ -10459,7 +10563,9 @@ module Aws::S3
     #   The name of the bucket for which the metrics configuration is set.
     #
     # @option params [required, String] :id
-    #   The ID used to identify the metrics configuration.
+    #   The ID used to identify the metrics configuration. The ID has a 64
+    #   character limit and can only contain letters, numbers, periods,
+    #   dashes, and underscores.
     #
     # @option params [required, Types::MetricsConfiguration] :metrics_configuration
     #   Specifies the metrics configuration.
@@ -11734,14 +11840,18 @@ module Aws::S3
     # Adds an object to a bucket. You must have WRITE permissions on a
     # bucket to add an object to it.
     #
-    # Amazon S3 never adds partial objects; if you receive a success
-    # response, Amazon S3 added the entire object to the bucket.
+    # <note markdown="1"> Amazon S3 never adds partial objects; if you receive a success
+    # response, Amazon S3 added the entire object to the bucket. You cannot
+    # use `PutObject` to only update a single piece of metadata for an
+    # existing object. You must put the entire object with updated metadata
+    # if you want to update some values.
+    #
+    #  </note>
     #
     # Amazon S3 is a distributed system. If it receives multiple write
     # requests for the same object simultaneously, it overwrites all but the
-    # last object written. Amazon S3 does not provide object locking; if you
-    # need this, make sure to build it into your application layer or use
-    # versioning instead.
+    # last object written. To prevent objects from being deleted or
+    # overwritten, you can use [Amazon S3 Object Lock][1].
     #
     # To ensure that data is not corrupted traversing the network, use the
     # `Content-MD5` header. When you use this header, Amazon S3 checks the
@@ -11756,36 +11866,33 @@ module Aws::S3
     # * To successfully change the objects acl of your `PutObject` request,
     #   you must have the `s3:PutObjectAcl` in your IAM permissions.
     #
+    # * To successfully set the tag-set with your `PutObject` request, you
+    #   must have the `s3:PutObjectTagging` in your IAM permissions.
+    #
     # * The `Content-MD5` header is required for any request to upload an
     #   object with a retention period configured using Amazon S3 Object
     #   Lock. For more information about Amazon S3 Object Lock, see [Amazon
-    #   S3 Object Lock Overview][1] in the *Amazon S3 User Guide*.
+    #   S3 Object Lock Overview][2] in the *Amazon S3 User Guide*.
     #
     #  </note>
     #
-    # **Server-side Encryption**
-    #
-    # You can optionally request server-side encryption. With server-side
-    # encryption, Amazon S3 encrypts your data as it writes it to disks in
-    # its data centers and decrypts the data when you access it. You have
-    # the option to provide your own encryption key or use Amazon Web
-    # Services managed encryption keys (SSE-S3 or SSE-KMS). For more
-    # information, see [Using Server-Side Encryption][2].
-    #
-    # If you request server-side encryption using Amazon Web Services Key
-    # Management Service (SSE-KMS), you can enable an S3 Bucket Key at the
-    # object-level. For more information, see [Amazon S3 Bucket Keys][3] in
-    # the *Amazon S3 User Guide*.
-    #
-    # **Access Control List (ACL)-Specific Request Headers**
-    #
-    # You can use headers to grant ACL- based permissions. By default, all
-    # objects are private. Only the owner has full access control. When
-    # adding a new object, you can grant permissions to individual Amazon
-    # Web Services accounts or to predefined groups defined by Amazon S3.
-    # These permissions are then added to the ACL on the object. For more
-    # information, see [Access Control List (ACL) Overview][4] and [Managing
-    # ACLs Using the REST API][5].
+    # You have three mutually exclusive options to protect data using
+    # server-side encryption in Amazon S3, depending on how you choose to
+    # manage the encryption keys. Specifically, the encryption key options
+    # are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys
+    # (SSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data
+    # with server-side encryption by using Amazon S3 managed keys (SSE-S3)
+    # by default. You can optionally tell Amazon S3 to encrypt data at by
+    # rest using server-side encryption with other key options. For more
+    # information, see [Using Server-Side Encryption][3].
+    #
+    # When adding a new object, you can use headers to grant ACL-based
+    # permissions to individual Amazon Web Services accounts or to
+    # predefined groups defined by Amazon S3. These permissions are then
+    # added to the ACL on the object. By default, all objects are private.
+    # Only the owner has full access control. For more information, see
+    # [Access Control List (ACL) Overview][4] and [Managing ACLs Using the
+    # REST API][5].
     #
     # If the bucket that you're uploading objects to uses the bucket owner
     # enforced setting for S3 Object Ownership, ACLs are disabled and no
@@ -11796,10 +11903,9 @@ module Aws::S3
     # ACL expressed in the XML format. PUT requests that contain other ACLs
     # (for example, custom grants to certain Amazon Web Services accounts)
     # fail and return a `400` error with the error code
-    # `AccessControlListNotSupported`.
-    #
-    # For more information, see [ Controlling ownership of objects and
-    # disabling ACLs][6] in the *Amazon S3 User Guide*.
+    # `AccessControlListNotSupported`. For more information, see [
+    # Controlling ownership of objects and disabling ACLs][6] in the *Amazon
+    # S3 User Guide*.
     #
     # <note markdown="1"> If your bucket uses the bucket owner enforced setting for Object
     # Ownership, all objects written to the bucket by any account will be
@@ -11807,8 +11913,6 @@ module Aws::S3
     #
     #  </note>
     #
-    # **Storage Class Options**
-    #
     # By default, Amazon S3 uses the STANDARD Storage Class to store newly
     # created objects. The STANDARD storage class provides high durability
     # and high availability. Depending on performance needs, you can specify
@@ -11816,19 +11920,16 @@ module Aws::S3
     # OUTPOSTS Storage Class. For more information, see [Storage Classes][7]
     # in the *Amazon S3 User Guide*.
     #
-    # **Versioning**
-    #
     # If you enable versioning for a bucket, Amazon S3 automatically
     # generates a unique version ID for the object being stored. Amazon S3
     # returns this ID in the response. When you enable versioning for a
     # bucket, if Amazon S3 receives multiple write requests for the same
-    # object simultaneously, it stores all of the objects.
-    #
-    # For more information about versioning, see [Adding Objects to
-    # Versioning Enabled Buckets][8]. For information about returning the
-    # versioning state of a bucket, see [GetBucketVersioning][9].
+    # object simultaneously, it stores all of the objects. For more
+    # information about versioning, see [Adding Objects to Versioning
+    # Enabled Buckets][8]. For information about returning the versioning
+    # state of a bucket, see [GetBucketVersioning][9].
     #
-    # **Related Resources**
+    # For more information about related Amazon S3 APIs, see the following:
     #
     # * [CopyObject][10]
     #
@@ -11836,9 +11937,9 @@ module Aws::S3
     #
     #
     #
-    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock-overview.html
-    # [2]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html
-    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-key.html
+    # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html
+    # [2]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lock-overview.html
+    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html
     # [4]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html
     # [5]: https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-using-rest-api.html
     # [6]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/about-object-ownership.html
@@ -11872,14 +11973,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -11898,21 +11999,21 @@ module Aws::S3
     # @option params [String] :content_disposition
     #   Specifies presentational information for the object. For more
     #   information, see
-    #   [http://www.w3.org/Protocols/rfc2616/rfc2616-sec19.html#sec19.5.1][1].
+    #   [https://www.rfc-editor.org/rfc/rfc6266#section-4][1].
     #
     #
     #
-    #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec19.html#sec19.5.1
+    #   [1]: https://www.rfc-editor.org/rfc/rfc6266#section-4
     #
     # @option params [String] :content_encoding
     #   Specifies what content encodings have been applied to the object and
     #   thus what decoding mechanisms must be applied to obtain the media-type
     #   referenced by the Content-Type header field. For more information, see
-    #   [http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11][1].
+    #   [https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding][1].
     #
     #
     #
-    #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11
+    #   [1]: https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding
     #
     # @option params [String] :content_language
     #   The language the content is in.
@@ -11920,11 +12021,11 @@ module Aws::S3
     # @option params [Integer] :content_length
     #   Size of the body in bytes. This parameter is useful when the size of
     #   the body cannot be determined automatically. For more information, see
-    #   [http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13][1].
+    #   [https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length][1].
     #
     #
     #
-    #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13
+    #   [1]: https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length
     #
     # @option params [String] :content_md5
     #   The base64-encoded 128-bit MD5 digest of the message (without the
@@ -11942,11 +12043,11 @@ module Aws::S3
     # @option params [String] :content_type
     #   A standard MIME type describing the format of the contents. For more
     #   information, see
-    #   [http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17][1].
+    #   [https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type][1].
     #
     #
     #
-    #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17
+    #   [1]: https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type
     #
     # @option params [String] :checksum_algorithm
     #   Indicates the algorithm used to create the checksum for the object
@@ -12011,11 +12112,11 @@ module Aws::S3
     # @option params [Time,DateTime,Date,Integer,String] :expires
     #   The date and time at which the object is no longer cacheable. For more
     #   information, see
-    #   [http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.21][1].
+    #   [https://www.rfc-editor.org/rfc/rfc7234#section-5.3][1].
     #
     #
     #
-    #   [1]: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.21
+    #   [1]: https://www.rfc-editor.org/rfc/rfc7234#section-5.3
     #
     # @option params [String] :grant_full_control
     #   Gives the grantee READ, READ\_ACP, and WRITE\_ACP permissions on the
@@ -12046,7 +12147,7 @@ module Aws::S3
     #
     # @option params [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing this object in
-    #   Amazon S3 (for example, AES256, aws:kms).
+    #   Amazon S3 (for example, AES256, `aws:kms`).
     #
     # @option params [String] :storage_class
     #   By default, Amazon S3 uses the STANDARD Storage Class to store newly
@@ -12103,9 +12204,9 @@ module Aws::S3
     #   ensure that the encryption key was transmitted without error.
     #
     # @option params [String] :ssekms_key_id
-    #   If `x-amz-server-side-encryption` is present and has the value of
-    #   `aws:kms`, this header specifies the ID of the Amazon Web Services Key
-    #   Management Service (Amazon Web Services KMS) symmetrical customer
+    #   If `x-amz-server-side-encryption` has a valid value of `aws:kms`, this
+    #   header specifies the ID of the Amazon Web Services Key Management
+    #   Service (Amazon Web Services KMS) symmetric encryption customer
     #   managed key that was used for the object. If you specify
     #   `x-amz-server-side-encryption:aws:kms`, but do not provide`
     #   x-amz-server-side-encryption-aws-kms-key-id`, Amazon S3 uses the
@@ -12116,7 +12217,10 @@ module Aws::S3
     # @option params [String] :ssekms_encryption_context
     #   Specifies the Amazon Web Services KMS Encryption Context to use for
     #   object encryption. The value of this header is a base64-encoded UTF-8
-    #   string holding JSON with the encryption context key-value pairs.
+    #   string holding JSON with the encryption context key-value pairs. This
+    #   value is stored as object metadata and automatically gets passed on to
+    #   Amazon Web Services KMS for future `GetObject` or `CopyObject`
+    #   operations on this object.
     #
     # @option params [Boolean] :bucket_key_enabled
     #   Specifies whether Amazon S3 should use an S3 Bucket Key for object
@@ -12180,23 +12284,6 @@ module Aws::S3
     #   * {Types::PutObjectOutput#request_charged #request_charged} => String
     #
     #
-    # @example Example: To upload an object
-    #
-    #   # The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file
-    #   # syntax. S3 returns VersionId of the newly created object.
-    #
-    #   resp = client.put_object({
-    #     body: "HappyFace.jpg", 
-    #     bucket: "examplebucket", 
-    #     key: "HappyFace.jpg", 
-    #   })
-    #
-    #   resp.to_h outputs the following:
-    #   {
-    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "tpf3zF08nBplQK1XLOefGskR7mGDwcDk", 
-    #   }
-    #
     # @example Example: To upload object and specify user-defined metadata
     #
     #   # The following example creates an object. The request also specifies optional metadata. If the bucket is versioning
@@ -12218,24 +12305,40 @@ module Aws::S3
     #     version_id: "pSKidl4pHBiNwukdbcPXAIs.sshFFOc0", 
     #   }
     #
-    # @example Example: To upload an object (specify optional headers)
+    # @example Example: To upload an object and specify optional tags
     #
-    #   # The following example uploads an object. The request specifies optional request headers to directs S3 to use specific
-    #   # storage class and use server-side encryption.
+    #   # The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore
+    #   # S3 returns version ID of the newly created object.
     #
     #   resp = client.put_object({
-    #     body: "HappyFace.jpg", 
+    #     body: "c:\\HappyFace.jpg", 
     #     bucket: "examplebucket", 
     #     key: "HappyFace.jpg", 
-    #     server_side_encryption: "AES256", 
-    #     storage_class: "STANDARD_IA", 
+    #     tagging: "key1=value1&key2=value2", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     server_side_encryption: "AES256", 
-    #     version_id: "CG612hodqujkf8FaaNfp8U..FIhLROcp", 
+    #     version_id: "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a", 
+    #   }
+    #
+    # @example Example: To upload an object and specify canned ACL.
+    #
+    #   # The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ
+    #   # access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
+    #
+    #   resp = client.put_object({
+    #     acl: "authenticated-read", 
+    #     body: "filetoupload", 
+    #     bucket: "examplebucket", 
+    #     key: "exampleobject", 
+    #   })
+    #
+    #   resp.to_h outputs the following:
+    #   {
+    #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
+    #     version_id: "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr", 
     #   }
     #
     # @example Example: To create an object.
@@ -12254,60 +12357,61 @@ module Aws::S3
     #     version_id: "Bvq0EDKxOcXLJXNo_Lkz37eM3R4pfzyQ", 
     #   }
     #
-    # @example Example: To upload an object and specify server-side encryption and object tags
+    # @example Example: To upload an object
     #
-    #   # The following example uploads and object. The request specifies the optional server-side encryption option. The request
-    #   # also specifies optional object tags. If the bucket is versioning enabled, S3 returns version ID in response.
+    #   # The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file
+    #   # syntax. S3 returns VersionId of the newly created object.
     #
     #   resp = client.put_object({
-    #     body: "filetoupload", 
+    #     body: "HappyFace.jpg", 
     #     bucket: "examplebucket", 
-    #     key: "exampleobject", 
-    #     server_side_encryption: "AES256", 
-    #     tagging: "key1=value1&key2=value2", 
+    #     key: "HappyFace.jpg", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     server_side_encryption: "AES256", 
-    #     version_id: "Ri.vC6qVlA4dEnjgRV4ZHsHoFIjqEMNt", 
+    #     version_id: "tpf3zF08nBplQK1XLOefGskR7mGDwcDk", 
     #   }
     #
-    # @example Example: To upload an object and specify optional tags
+    # @example Example: To upload an object (specify optional headers)
     #
-    #   # The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore
-    #   # S3 returns version ID of the newly created object.
+    #   # The following example uploads an object. The request specifies optional request headers to directs S3 to use specific
+    #   # storage class and use server-side encryption.
     #
     #   resp = client.put_object({
-    #     body: "c:\\HappyFace.jpg", 
+    #     body: "HappyFace.jpg", 
     #     bucket: "examplebucket", 
     #     key: "HappyFace.jpg", 
-    #     tagging: "key1=value1&key2=value2", 
+    #     server_side_encryption: "AES256", 
+    #     storage_class: "STANDARD_IA", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a", 
+    #     server_side_encryption: "AES256", 
+    #     version_id: "CG612hodqujkf8FaaNfp8U..FIhLROcp", 
     #   }
     #
-    # @example Example: To upload an object and specify canned ACL.
+    # @example Example: To upload an object and specify server-side encryption and object tags
     #
-    #   # The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ
-    #   # access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
+    #   # The following example uploads an object. The request specifies the optional server-side encryption option. The request
+    #   # also specifies optional object tags. If the bucket is versioning enabled, S3 returns version ID in response.
     #
     #   resp = client.put_object({
-    #     acl: "authenticated-read", 
     #     body: "filetoupload", 
     #     bucket: "examplebucket", 
     #     key: "exampleobject", 
+    #     server_side_encryption: "AES256", 
+    #     tagging: "key1=value1&key2=value2", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     etag: "\"6805f2cfc46c0f04559748bb039d69ae\"", 
-    #     version_id: "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr", 
+    #     server_side_encryption: "AES256", 
+    #     version_id: "Ri.vC6qVlA4dEnjgRV4ZHsHoFIjqEMNt", 
     #   }
     #
     # @example Streaming a file from disk
@@ -12645,14 +12749,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -13149,14 +13253,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -13396,35 +13500,14 @@ module Aws::S3
     # Operations][1] and [Managing Access Permissions to Your Amazon S3
     # Resources][2] in the *Amazon S3 User Guide*.
     #
-    # **Querying Archives with Select Requests**
-    #
-    # You use a select type of request to perform SQL queries on archived
-    # objects. The archived objects that are being queried by the select
-    # request must be formatted as uncompressed comma-separated values (CSV)
-    # files. You can run queries and custom analytics on your archived data
-    # without having to restore your data to a hotter Amazon S3 tier. For an
-    # overview about select requests, see [Querying Archived Objects][3] in
-    # the *Amazon S3 User Guide*.
-    #
-    # When making a select request, do the following:
-    #
-    # * Define an output location for the select query's output. This must
-    #   be an Amazon S3 bucket in the same Amazon Web Services Region as the
-    #   bucket that contains the archive object that is being queried. The
-    #   Amazon Web Services account that initiates the job must have
-    #   permissions to write to the S3 bucket. You can specify the storage
-    #   class and encryption for the output objects stored in the bucket.
-    #   For more information about output, see [Querying Archived
-    #   Objects][3] in the *Amazon S3 User Guide*.
-    #
-    #   For more information about the `S3` structure in the request body,
-    #   see the following:
+    # For more information about the `S3` structure in the request body, see
+    # the following:
     #
-    #   * [PutObject][4]
+    # * * [PutObject][3]
     #
-    #   * [Managing Access with ACLs][5] in the *Amazon S3 User Guide*
+    #   * [Managing Access with ACLs][4] in the *Amazon S3 User Guide*
     #
-    #   * [Protecting Data Using Server-Side Encryption][6] in the *Amazon
+    #   * [Protecting Data Using Server-Side Encryption][5] in the *Amazon
     #     S3 User Guide*
     #
     # * Define the SQL expression for the `SELECT` type of restoration for
@@ -13449,10 +13532,6 @@ module Aws::S3
     #
     #     `SELECT s.Id, s.FirstName, s.SSN FROM S3Object s`
     #
-    # For more information about using SQL with S3 Glacier Select restore,
-    # see [SQL Reference for Amazon S3 Select and S3 Glacier Select][7] in
-    # the *Amazon S3 User Guide*.
-    #
     # When making a select request, you can also do the following:
     #
     # * To expedite your queries, specify the `Expedited` tier. For more
@@ -13470,7 +13549,7 @@ module Aws::S3
     #   through a lifecycle policy.
     #
     # * You can issue more than one select request on the same Amazon S3
-    #   object. Amazon S3 doesn't deduplicate requests, so avoid issuing
+    #   object. Amazon S3 doesn't duplicate requests, so avoid issuing
     #   duplicate requests.
     #
     # * Amazon S3 accepts a select request even if the object has already
@@ -13478,27 +13557,30 @@ module Aws::S3
     #
     # **Restoring objects**
     #
-    # Objects that you archive to the S3 Glacier or S3 Glacier Deep Archive
-    # storage class, and S3 Intelligent-Tiering Archive or S3
-    # Intelligent-Tiering Deep Archive tiers are not accessible in real
-    # time. For objects in Archive Access or Deep Archive Access tiers you
-    # must first initiate a restore request, and then wait until the object
-    # is moved into the Frequent Access tier. For objects in S3 Glacier or
-    # S3 Glacier Deep Archive storage classes you must first initiate a
+    # Objects that you archive to the S3 Glacier Flexible Retrieval or S3
+    # Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive
+    # or S3 Intelligent-Tiering Deep Archive tiers, are not accessible in
+    # real time. For objects in the S3 Glacier Flexible Retrieval or S3
+    # Glacier Deep Archive storage classes, you must first initiate a
     # restore request, and then wait until a temporary copy of the object is
-    # available. To access an archived object, you must restore the object
-    # for the duration (number of days) that you specify.
+    # available. If you want a permanent copy of the object, create a copy
+    # of it in the Amazon S3 Standard storage class in your S3 bucket. To
+    # access an archived object, you must restore the object for the
+    # duration (number of days) that you specify. For objects in the Archive
+    # Access or Deep Archive Access tiers of S3 Intelligent-Tiering, you
+    # must first initiate a restore request, and then wait until the object
+    # is moved into the Frequent Access tier.
     #
     # To restore a specific object version, you can provide a version ID. If
     # you don't provide a version ID, Amazon S3 restores the current
     # version.
     #
-    # When restoring an archived object (or using a select request), you can
-    # specify one of the following data access tier options in the `Tier`
-    # element of the request body:
+    # When restoring an archived object, you can specify one of the
+    # following data access tier options in the `Tier` element of the
+    # request body:
     #
     # * `Expedited` - Expedited retrievals allow you to quickly access your
-    #   data stored in the S3 Glacier storage class or S3
+    #   data stored in the S3 Glacier Flexible Retrieval storage class or S3
     #   Intelligent-Tiering Archive tier when occasional urgent requests for
     #   a subset of archives are required. For all but the largest archived
     #   objects (250 MB+), data accessed using Expedited retrievals is
@@ -13512,28 +13594,30 @@ module Aws::S3
     #   archived objects within several hours. This is the default option
     #   for retrieval requests that do not specify the retrieval option.
     #   Standard retrievals typically finish within 3–5 hours for objects
-    #   stored in the S3 Glacier storage class or S3 Intelligent-Tiering
-    #   Archive tier. They typically finish within 12 hours for objects
-    #   stored in the S3 Glacier Deep Archive storage class or S3
-    #   Intelligent-Tiering Deep Archive tier. Standard retrievals are free
-    #   for objects stored in S3 Intelligent-Tiering.
-    #
-    # * `Bulk` - Bulk retrievals are the lowest-cost retrieval option in S3
-    #   Glacier, enabling you to retrieve large amounts, even petabytes, of
-    #   data inexpensively. Bulk retrievals typically finish within 5–12
-    #   hours for objects stored in the S3 Glacier storage class or S3
-    #   Intelligent-Tiering Archive tier. They typically finish within 48
+    #   stored in the S3 Glacier Flexible Retrieval storage class or S3
+    #   Intelligent-Tiering Archive tier. They typically finish within 12
     #   hours for objects stored in the S3 Glacier Deep Archive storage
-    #   class or S3 Intelligent-Tiering Deep Archive tier. Bulk retrievals
-    #   are free for objects stored in S3 Intelligent-Tiering.
+    #   class or S3 Intelligent-Tiering Deep Archive tier. Standard
+    #   retrievals are free for objects stored in S3 Intelligent-Tiering.
+    #
+    # * `Bulk` - Bulk retrievals free for objects stored in the S3 Glacier
+    #   Flexible Retrieval and S3 Intelligent-Tiering storage classes,
+    #   enabling you to retrieve large amounts, even petabytes, of data at
+    #   no cost. Bulk retrievals typically finish within 5–12 hours for
+    #   objects stored in the S3 Glacier Flexible Retrieval storage class or
+    #   S3 Intelligent-Tiering Archive tier. Bulk retrievals are also the
+    #   lowest-cost retrieval option when restoring objects from S3 Glacier
+    #   Deep Archive. They typically finish within 48 hours for objects
+    #   stored in the S3 Glacier Deep Archive storage class or S3
+    #   Intelligent-Tiering Deep Archive tier.
     #
     # For more information about archive retrieval options and provisioned
     # capacity for `Expedited` data access, see [Restoring Archived
-    # Objects][8] in the *Amazon S3 User Guide*.
+    # Objects][6] in the *Amazon S3 User Guide*.
     #
     # You can use Amazon S3 restore speed upgrade to change the restore
     # speed to a faster speed while it is in progress. For more information,
-    # see [ Upgrading the speed of an in-progress restore][9] in the *Amazon
+    # see [ Upgrading the speed of an in-progress restore][7] in the *Amazon
     # S3 User Guide*.
     #
     # To get the status of object restoration, you can send a `HEAD`
@@ -13541,7 +13625,7 @@ module Aws::S3
     # information about the restoration status, in the response. You can use
     # Amazon S3 event notifications to notify you when a restore is
     # initiated or completed. For more information, see [Configuring Amazon
-    # S3 Event Notifications][10] in the *Amazon S3 User Guide*.
+    # S3 Event Notifications][8] in the *Amazon S3 User Guide*.
     #
     # After restoring an archived object, you can update the restoration
     # period by reissuing the request with a new period. Amazon S3 updates
@@ -13556,8 +13640,8 @@ module Aws::S3
     # object copy for 10 days, but the object is scheduled to expire in 3
     # days, Amazon S3 deletes the object in 3 days. For more information
     # about lifecycle configuration, see
-    # [PutBucketLifecycleConfiguration][11] and [Object Lifecycle
-    # Management][12] in *Amazon S3 User Guide*.
+    # [PutBucketLifecycleConfiguration][9] and [Object Lifecycle
+    # Management][10] in *Amazon S3 User Guide*.
     #
     # **Responses**
     #
@@ -13594,28 +13678,23 @@ module Aws::S3
     #
     # **Related Resources**
     #
-    # * [PutBucketLifecycleConfiguration][11]
-    #
-    # * [GetBucketNotificationConfiguration][13]
+    # * [PutBucketLifecycleConfiguration][9]
     #
-    # * [SQL Reference for Amazon S3 Select and S3 Glacier Select ][7] in
-    #   the *Amazon S3 User Guide*
+    # * [GetBucketNotificationConfiguration][11]
     #
     #
     #
     # [1]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-with-s3-actions.html#using-with-s3-actions-related-to-bucket-subresources
     # [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-access-control.html
-    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/querying-glacier-archives.html
-    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutObject.html
-    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html
-    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
-    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-glacier-select-sql-reference.html
-    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html
-    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html#restoring-objects-upgrade-tier.title.html
-    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html
-    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html
-    # [12]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html
-    # [13]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketNotificationConfiguration.html
+    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutObject.html
+    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/dev/S3_ACLs_UsingACLs.html
+    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
+    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html
+    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/dev/restoring-objects.html#restoring-objects-upgrade-tier.title.html
+    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/dev/NotificationHowTo.html
+    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html
+    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html
+    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketNotificationConfiguration.html
     #
     # @option params [required, String] :bucket
     #   The bucket name containing the object to restore.
@@ -13628,14 +13707,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -13828,17 +13907,13 @@ module Aws::S3
     # from Objects][1] and [SELECT Command][2] in the *Amazon S3 User
     # Guide*.
     #
-    # For more information about using SQL with Amazon S3 Select, see [ SQL
-    # Reference for Amazon S3 Select and S3 Glacier Select][3] in the
-    # *Amazon S3 User Guide*.
-    #
     #
     #
     # **Permissions**
     #
     # You must have `s3:GetObject` permission for this operation. Amazon S3
     # Select does not support anonymous access. For more information about
-    # permissions, see [Specifying Permissions in a Policy][4] in the
+    # permissions, see [Specifying Permissions in a Policy][3] in the
     # *Amazon S3 User Guide*.
     #
     #
@@ -13865,71 +13940,70 @@ module Aws::S3
     #
     #   For objects that are encrypted with customer-provided encryption
     #   keys (SSE-C), you must use HTTPS, and you must use the headers that
-    #   are documented in the [GetObject][5]. For more information about
+    #   are documented in the [GetObject][4]. For more information about
     #   SSE-C, see [Server-Side Encryption (Using Customer-Provided
-    #   Encryption Keys)][6] in the *Amazon S3 User Guide*.
+    #   Encryption Keys)][5] in the *Amazon S3 User Guide*.
     #
-    #   For objects that are encrypted with Amazon S3 managed encryption
-    #   keys (SSE-S3) and Amazon Web Services KMS keys (SSE-KMS),
-    #   server-side encryption is handled transparently, so you don't need
-    #   to specify anything. For more information about server-side
-    #   encryption, including SSE-S3 and SSE-KMS, see [Protecting Data Using
-    #   Server-Side Encryption][7] in the *Amazon S3 User Guide*.
+    #   For objects that are encrypted with Amazon S3 managed keys (SSE-S3)
+    #   and Amazon Web Services KMS keys (SSE-KMS), server-side encryption
+    #   is handled transparently, so you don't need to specify anything.
+    #   For more information about server-side encryption, including SSE-S3
+    #   and SSE-KMS, see [Protecting Data Using Server-Side Encryption][6]
+    #   in the *Amazon S3 User Guide*.
     #
     # **Working with the Response Body**
     #
     # Given the response size is unknown, Amazon S3 Select streams the
     # response as a series of messages and includes a `Transfer-Encoding`
     # header with `chunked` as its value in the response. For more
-    # information, see [Appendix: SelectObjectContent Response][8].
+    # information, see [Appendix: SelectObjectContent Response][7].
     #
     #
     #
     # **GetObject Support**
     #
     # The `SelectObjectContent` action does not support the following
-    # `GetObject` functionality. For more information, see [GetObject][5].
+    # `GetObject` functionality. For more information, see [GetObject][4].
     #
     # * `Range`: Although you can specify a scan range for an Amazon S3
-    #   Select request (see [SelectObjectContentRequest - ScanRange][9] in
+    #   Select request (see [SelectObjectContentRequest - ScanRange][8] in
     #   the request parameters), you cannot specify the range of bytes of an
     #   object to return.
     #
     # * GLACIER, DEEP\_ARCHIVE and REDUCED\_REDUNDANCY storage classes: You
     #   cannot specify the GLACIER, DEEP\_ARCHIVE, or `REDUCED_REDUNDANCY`
     #   storage classes. For more information, about storage classes see
-    #   [Storage Classes][10] in the *Amazon S3 User Guide*.
+    #   [Storage Classes][9] in the *Amazon S3 User Guide*.
     #
     #
     #
     # **Special Errors**
     #
     # For a list of special errors for this operation, see [List of SELECT
-    # Object Content Error Codes][11]
+    # Object Content Error Codes][10]
     #
     # **Related Resources**
     #
-    # * [GetObject][5]
+    # * [GetObject][4]
     #
-    # * [GetBucketLifecycleConfiguration][12]
+    # * [GetBucketLifecycleConfiguration][11]
     #
-    # * [PutBucketLifecycleConfiguration][13]
+    # * [PutBucketLifecycleConfiguration][12]
     #
     #
     #
     # [1]: https://docs.aws.amazon.com/AmazonS3/latest/dev/selecting-content-from-objects.html
     # [2]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-glacier-select-sql-reference-select.html
-    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/s3-glacier-select-sql-reference.html
-    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html
-    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
-    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html
-    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
-    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/API/RESTSelectObjectAppendix.html
-    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_SelectObjectContent.html#AmazonS3-SelectObjectContent-request-ScanRange
-    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMetadata.html#storage-class-intro
-    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html#SelectObjectContentErrorCodeList
-    # [12]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketLifecycleConfiguration.html
-    # [13]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html
+    # [3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html
+    # [4]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
+    # [5]: https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html
+    # [6]: https://docs.aws.amazon.com/AmazonS3/latest/dev/serv-side-encryption.html
+    # [7]: https://docs.aws.amazon.com/AmazonS3/latest/API/RESTSelectObjectAppendix.html
+    # [8]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_SelectObjectContent.html#AmazonS3-SelectObjectContent-request-ScanRange
+    # [9]: https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingMetadata.html#storage-class-intro
+    # [10]: https://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html#SelectObjectContentErrorCodeList
+    # [11]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketLifecycleConfiguration.html
+    # [12]: https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html
     #
     # @option params [required, String] :bucket
     #   The S3 bucket.
@@ -14279,27 +14353,35 @@ module Aws::S3
     # upload API, go to [Multipart Upload and Permissions][6] in the *Amazon
     # S3 User Guide*.
     #
-    # You can optionally request server-side encryption where Amazon S3
+    # Server-side encryption is for data encryption at rest. Amazon S3
     # encrypts your data as it writes it to disks in its data centers and
-    # decrypts it for you when you access it. You have the option of
-    # providing your own encryption key, or you can use the Amazon Web
-    # Services managed encryption keys. If you choose to provide your own
+    # decrypts it when you access it. You have three mutually exclusive
+    # options to protect data using server-side encryption in Amazon S3,
+    # depending on how you choose to manage the encryption keys.
+    # Specifically, the encryption key options are Amazon S3 managed keys
+    # (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and
+    # Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with
+    # server-side encryption using Amazon S3 managed keys (SSE-S3) by
+    # default. You can optionally tell Amazon S3 to encrypt data at rest
+    # using server-side encryption with other key options. The option you
+    # use depends on whether you want to use KMS keys (SSE-KMS) or provide
+    # your own encryption key (SSE-C). If you choose to provide your own
     # encryption key, the request headers you provide in the request must
     # match the headers you used in the request to initiate the upload by
     # using [CreateMultipartUpload][2]. For more information, go to [Using
     # Server-Side Encryption][7] in the *Amazon S3 User Guide*.
     #
     # Server-side encryption is supported by the S3 Multipart Upload
-    # actions. Unless you are using a customer-provided encryption key, you
-    # don't need to specify the encryption parameters in each UploadPart
-    # request. Instead, you only need to specify the server-side encryption
-    # parameters in the initial Initiate Multipart request. For more
-    # information, see [CreateMultipartUpload][2].
+    # actions. Unless you are using a customer-provided encryption key
+    # (SSE-C), you don't need to specify the encryption parameters in each
+    # UploadPart request. Instead, you only need to specify the server-side
+    # encryption parameters in the initial Initiate Multipart request. For
+    # more information, see [CreateMultipartUpload][2].
     #
     # If you requested server-side encryption using a customer-provided
-    # encryption key in your initiate multipart upload request, you must
-    # provide identical encryption information in each part upload using the
-    # following headers.
+    # encryption key (SSE-C) in your initiate multipart upload request, you
+    # must provide identical encryption information in each part upload
+    # using the following headers.
     #
     # * x-amz-server-side-encryption-customer-algorithm
     #
@@ -14359,14 +14441,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -14709,14 +14791,14 @@ module Aws::S3
     #   name. For more information about access point ARNs, see [Using access
     #   points][1] in the *Amazon S3 User Guide*.
     #
-    #   When using this action with Amazon S3 on Outposts, you must direct
+    #   When you use this action with Amazon S3 on Outposts, you must direct
     #   requests to the S3 on Outposts hostname. The S3 on Outposts hostname
     #   takes the form `
     #   AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com`.
-    #   When using this action with S3 on Outposts through the Amazon Web
-    #   Services SDKs, you provide the Outposts bucket ARN in place of the
-    #   bucket name. For more information about S3 on Outposts ARNs, see
-    #   [Using Amazon S3 on Outposts][2] in the *Amazon S3 User Guide*.
+    #   When you use this action with S3 on Outposts through the Amazon Web
+    #   Services SDKs, you provide the Outposts access point ARN in place of
+    #   the bucket name. For more information about S3 on Outposts ARNs, see
+    #   [What is S3 on Outposts][2] in the *Amazon S3 User Guide*.
     #
     #
     #
@@ -14866,45 +14948,45 @@ module Aws::S3
     #   * {Types::UploadPartCopyOutput#request_charged #request_charged} => String
     #
     #
-    # @example Example: To upload a part by copying byte range from an existing object as data source
+    # @example Example: To upload a part by copying data from an existing object as data source
     #
-    #   # The following example uploads a part of a multipart upload by copying a specified byte range from an existing object as
-    #   # data source.
+    #   # The following example uploads a part of a multipart upload by copying data from an existing object as data source.
     #
     #   resp = client.upload_part_copy({
     #     bucket: "examplebucket", 
     #     copy_source: "/bucketname/sourceobjectkey", 
-    #     copy_source_range: "bytes=1-100000", 
     #     key: "examplelargeobject", 
-    #     part_number: 2, 
+    #     part_number: 1, 
     #     upload_id: "exampleuoh_10OhKhT7YukE9bjzTPRiuaCotmZM_pFngJFir9OZNrSr5cWa3cq3LZSUsfjI4FI7PkP91We7Nrw--", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     copy_part_result: {
-    #       etag: "\"65d16d19e65a7508a51f043180edcc36\"", 
-    #       last_modified: Time.parse("2016-12-29T21:44:28.000Z"), 
+    #       etag: "\"b0c6f0e7e054ab8fa2536a2677f8734d\"", 
+    #       last_modified: Time.parse("2016-12-29T21:24:43.000Z"), 
     #     }, 
     #   }
     #
-    # @example Example: To upload a part by copying data from an existing object as data source
+    # @example Example: To upload a part by copying byte range from an existing object as data source
     #
-    #   # The following example uploads a part of a multipart upload by copying data from an existing object as data source.
+    #   # The following example uploads a part of a multipart upload by copying a specified byte range from an existing object as
+    #   # data source.
     #
     #   resp = client.upload_part_copy({
     #     bucket: "examplebucket", 
     #     copy_source: "/bucketname/sourceobjectkey", 
+    #     copy_source_range: "bytes=1-100000", 
     #     key: "examplelargeobject", 
-    #     part_number: 1, 
+    #     part_number: 2, 
     #     upload_id: "exampleuoh_10OhKhT7YukE9bjzTPRiuaCotmZM_pFngJFir9OZNrSr5cWa3cq3LZSUsfjI4FI7PkP91We7Nrw--", 
     #   })
     #
     #   resp.to_h outputs the following:
     #   {
     #     copy_part_result: {
-    #       etag: "\"b0c6f0e7e054ab8fa2536a2677f8734d\"", 
-    #       last_modified: Time.parse("2016-12-29T21:24:43.000Z"), 
+    #       etag: "\"65d16d19e65a7508a51f043180edcc36\"", 
+    #       last_modified: Time.parse("2016-12-29T21:44:28.000Z"), 
     #     }, 
     #   }
     #
@@ -15240,7 +15322,7 @@ module Aws::S3
     #
     # @option params [String] :server_side_encryption
     #   The server-side encryption algorithm used when storing requested
-    #   object in Amazon S3 (for example, AES256, aws:kms).
+    #   object in Amazon S3 (for example, AES256, `aws:kms`).
     #
     # @option params [String] :sse_customer_algorithm
     #   Encryption algorithm used if server-side encryption with a
@@ -15249,8 +15331,8 @@ module Aws::S3
     #
     # @option params [String] :ssekms_key_id
     #   If present, specifies the ID of the Amazon Web Services Key Management
-    #   Service (Amazon Web Services KMS) symmetric customer managed key that
-    #   was used for stored in Amazon S3 object.
+    #   Service (Amazon Web Services KMS) symmetric encryption customer
+    #   managed key that was used for stored in Amazon S3 object.
     #
     # @option params [String] :sse_customer_key_md5
     #   128-bit MD5 digest of customer-provided encryption key used in Amazon
@@ -15354,7 +15436,7 @@ module Aws::S3
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-s3'
-      context[:gem_version] = '1.119.2'
+      context[:gem_version] = '1.120.1'
       Seahorse::Client::Request.new(handlers, context)
     end