aws-sdk-rds 1.206.0 → 1.208.0

data/lib/aws-sdk-rds/client.rb

@@ -4100,117 +4100,132 @@ module Aws::RDS
     #   The meaning of this parameter differs according to the database engine
     #   you use.
     #
-    #   **MySQL**
+    #   Amazon Aurora MySQL
     #
-    #   The name of the database to create when the DB instance is created. If
-    #   this parameter isn't specified, no database is created in the DB
-    #   instance.
+    #   : The name of the database to create when the primary DB instance of
+    #     the Aurora MySQL DB cluster is created. If this parameter isn't
+    #     specified for an Aurora MySQL DB cluster, no database is created in
+    #     the DB cluster.
     #
-    #   Constraints:
+    #     Constraints:
     #
-    #   * Must contain 1 to 64 letters or numbers.
+    #     * Must contain 1 to 64 alphanumeric characters.
     #
-    #   * Must begin with a letter. Subsequent characters can be letters,
-    #     underscores, or digits (0-9).
+    #     * Can't be a word reserved by the database engine.
     #
-    #   * Can't be a word reserved by the specified database engine
+    #   Amazon Aurora PostgreSQL
     #
-    #   **MariaDB**
+    #   : The name of the database to create when the primary DB instance of
+    #     the Aurora PostgreSQL DB cluster is created. If this parameter
+    #     isn't specified for an Aurora PostgreSQL DB cluster, a database
+    #     named `postgres` is created in the DB cluster.
     #
-    #   The name of the database to create when the DB instance is created. If
-    #   this parameter isn't specified, no database is created in the DB
-    #   instance.
+    #     Constraints:
     #
-    #   Constraints:
+    #     * It must contain 1 to 63 alphanumeric characters.
     #
-    #   * Must contain 1 to 64 letters or numbers.
+    #     * Must begin with a letter. Subsequent characters can be letters,
+    #       underscores, or digits (0 to 9).
     #
-    #   * Must begin with a letter. Subsequent characters can be letters,
-    #     underscores, or digits (0-9).
+    #     * Can't be a word reserved by the database engine.
     #
-    #   * Can't be a word reserved by the specified database engine
+    #   Amazon RDS Custom for Oracle
     #
-    #   **PostgreSQL**
+    #   : The Oracle System ID (SID) of the created RDS Custom DB instance. If
+    #     you don't specify a value, the default value is `ORCL` for non-CDBs
+    #     and `RDSCDB` for CDBs.
     #
-    #   The name of the database to create when the DB instance is created. If
-    #   this parameter isn't specified, a database named `postgres` is
-    #   created in the DB instance.
+    #     Default: `ORCL`
     #
-    #   Constraints:
+    #     Constraints:
     #
-    #   * Must contain 1 to 63 letters, numbers, or underscores.
+    #     * Must contain 1 to 8 alphanumeric characters.
     #
-    #   * Must begin with a letter. Subsequent characters can be letters,
-    #     underscores, or digits (0-9).
+    #     * Must contain a letter.
     #
-    #   * Can't be a word reserved by the specified database engine
+    #     * Can't be a word reserved by the database engine.
     #
-    #   **Oracle**
+    #   Amazon RDS Custom for SQL Server
     #
-    #   The Oracle System ID (SID) of the created DB instance. If you don't
-    #   specify a value, the default value is `ORCL`. You can't specify the
-    #   string `null`, or any other reserved word, for `DBName`.
+    #   : Not applicable. Must be null.
     #
-    #   Default: `ORCL`
+    #   RDS for Db2
     #
-    #   Constraints:
+    #   : The name of the database to create when the DB instance is created.
+    #     If this parameter isn't specified, no database is created in the DB
+    #     instance.
     #
-    #   * Can't be longer than 8 characters
+    #     Constraints:
     #
-    #   ^
+    #     * Must contain 1 to 64 letters or numbers.
     #
-    #   **Amazon RDS Custom for Oracle**
+    #     * Must begin with a letter. Subsequent characters can be letters,
+    #       underscores, or digits (0-9).
     #
-    #   The Oracle System ID (SID) of the created RDS Custom DB instance. If
-    #   you don't specify a value, the default value is `ORCL` for non-CDBs
-    #   and `RDSCDB` for CDBs.
+    #     * Can't be a word reserved by the specified database engine.
     #
-    #   Default: `ORCL`
+    #   RDS for MariaDB
     #
-    #   Constraints:
+    #   : The name of the database to create when the DB instance is created.
+    #     If this parameter isn't specified, no database is created in the DB
+    #     instance.
+    #
+    #     Constraints:
+    #
+    #     * Must contain 1 to 64 letters or numbers.
     #
-    #   * It must contain 1 to 8 alphanumeric characters.
+    #     * Must begin with a letter. Subsequent characters can be letters,
+    #       underscores, or digits (0-9).
     #
-    #   * It must contain a letter.
+    #     * Can't be a word reserved by the specified database engine.
     #
-    #   * It can't be a word reserved by the database engine.
+    #   RDS for MySQL
     #
-    #   **Amazon RDS Custom for SQL Server**
+    #   : The name of the database to create when the DB instance is created.
+    #     If this parameter isn't specified, no database is created in the DB
+    #     instance.
     #
-    #   Not applicable. Must be null.
+    #     Constraints:
     #
-    #   **SQL Server**
+    #     * Must contain 1 to 64 letters or numbers.
     #
-    #   Not applicable. Must be null.
+    #     * Must begin with a letter. Subsequent characters can be letters,
+    #       underscores, or digits (0-9).
     #
-    #   **Amazon Aurora MySQL**
+    #     * Can't be a word reserved by the specified database engine.
     #
-    #   The name of the database to create when the primary DB instance of the
-    #   Aurora MySQL DB cluster is created. If this parameter isn't specified
-    #   for an Aurora MySQL DB cluster, no database is created in the DB
-    #   cluster.
+    #   RDS for Oracle
     #
-    #   Constraints:
+    #   : The Oracle System ID (SID) of the created DB instance. If you don't
+    #     specify a value, the default value is `ORCL`. You can't specify the
+    #     string `null`, or any other reserved word, for `DBName`.
     #
-    #   * It must contain 1 to 64 alphanumeric characters.
+    #     Default: `ORCL`
     #
-    #   * It can't be a word reserved by the database engine.
+    #     Constraints:
     #
-    #   **Amazon Aurora PostgreSQL**
+    #     * Can't be longer than 8 characters.
     #
-    #   The name of the database to create when the primary DB instance of the
-    #   Aurora PostgreSQL DB cluster is created. If this parameter isn't
-    #   specified for an Aurora PostgreSQL DB cluster, a database named
-    #   `postgres` is created in the DB cluster.
+    #     ^
     #
-    #   Constraints:
+    #   RDS for PostgreSQL
+    #
+    #   : The name of the database to create when the DB instance is created.
+    #     If this parameter isn't specified, a database named `postgres` is
+    #     created in the DB instance.
+    #
+    #     Constraints:
     #
-    #   * It must contain 1 to 63 alphanumeric characters.
+    #     * Must contain 1 to 63 letters, numbers, or underscores.
     #
-    #   * It must begin with a letter. Subsequent characters can be letters,
-    #     underscores, or digits (0 to 9).
+    #     * Must begin with a letter. Subsequent characters can be letters,
+    #       underscores, or digits (0-9).
     #
-    #   * It can't be a word reserved by the database engine.
+    #     * Can't be a word reserved by the specified database engine.
+    #
+    #   RDS for SQL Server
+    #
+    #   : Not applicable. Must be null.
     #
     # @option params [required, String] :db_instance_identifier
     #   The identifier for this DB instance. This parameter is stored as a
@@ -4248,6 +4263,17 @@ module Aws::RDS
     #       65536 for RDS Custom for Oracle, 16384 for RDS Custom for SQL
     #       Server.
     #
+    #   RDS for Db2
+    #
+    #   : Constraints to the amount of storage for each storage type are the
+    #     following:
+    #
+    #     * General Purpose (SSD) storage (gp2, gp3): Must be an integer from
+    #       20 to 64000.
+    #
+    #     * Provisioned IOPS storage (io1): Must be an integer from 100 to
+    #       64000.
+    #
     #   RDS for MariaDB
     #
     #   : Constraints to the amount of storage for each storage type are the
@@ -4361,6 +4387,10 @@ module Aws::RDS
     #
     #   * `custom-sqlserver-web` (for RDS Custom for SQL Server DB instances)
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -4415,6 +4445,8 @@ module Aws::RDS
     #
     #   Length Constraints:
     #
+    #   * RDS for Db2 - Must contain from 8 to 255 characters.
+    #
     #   * RDS for MariaDB - Must contain from 8 to 41 characters.
     #
     #   * RDS for Microsoft SQL Server - Must contain from 8 to 128
@@ -4575,6 +4607,8 @@ module Aws::RDS
     #
     #   Default:
     #
+    #   * RDS for Db2 - `50000`
+    #
     #   * RDS for MariaDB - `3306`
     #
     #   * RDS for Microsoft SQL Server - `1433`
@@ -4632,40 +4666,46 @@ module Aws::RDS
     #   : See [RDS Custom for SQL Server general requirements][2] in the
     #     *Amazon RDS User Guide*.
     #
+    #   RDS for Db2
+    #
+    #   : For information, see [Db2 on Amazon RDS versions][3] in the *Amazon
+    #     RDS User Guide*.
+    #
     #   RDS for MariaDB
     #
-    #   : For information, see [MariaDB on Amazon RDS versions][3] in the
+    #   : For information, see [MariaDB on Amazon RDS versions][4] in the
     #     *Amazon RDS User Guide*.
     #
     #   RDS for Microsoft SQL Server
     #
     #   : For information, see [Microsoft SQL Server versions on Amazon
-    #     RDS][4] in the *Amazon RDS User Guide*.
+    #     RDS][5] in the *Amazon RDS User Guide*.
     #
     #   RDS for MySQL
     #
-    #   : For information, see [MySQL on Amazon RDS versions][5] in the
+    #   : For information, see [MySQL on Amazon RDS versions][6] in the
     #     *Amazon RDS User Guide*.
     #
     #   RDS for Oracle
     #
-    #   : For information, see [Oracle Database Engine release notes][6] in
+    #   : For information, see [Oracle Database Engine release notes][7] in
     #     the *Amazon RDS User Guide*.
     #
     #   RDS for PostgreSQL
     #
     #   : For information, see [Amazon RDS for PostgreSQL versions and
-    #     extensions][7] in the *Amazon RDS User Guide*.
+    #     extensions][8] in the *Amazon RDS User Guide*.
     #
     #
     #
     #   [1]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/custom-creating.html#custom-creating.create
     #   [2]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/custom-reqs-limits-MS.html
-    #   [3]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_MariaDB.html#MariaDB.Concepts.VersionMgmt
-    #   [4]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_SQLServer.html#SQLServer.Concepts.General.VersionSupport
-    #   [5]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_MySQL.html#MySQL.Concepts.VersionMgmt
-    #   [6]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/Appendix.Oracle.PatchComposition.html
-    #   [7]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_PostgreSQL.html#PostgreSQL.Concepts
+    #   [3]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_Db2.html#Db2.Concepts.VersionMgmt
+    #   [4]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_MariaDB.html#MariaDB.Concepts.VersionMgmt
+    #   [5]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_SQLServer.html#SQLServer.Concepts.General.VersionSupport
+    #   [6]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_MySQL.html#MySQL.Concepts.VersionMgmt
+    #   [7]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/Appendix.Oracle.PatchComposition.html
+    #   [8]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_PostgreSQL.html#PostgreSQL.Concepts
     #
     # @option params [Boolean] :auto_minor_version_upgrade
     #   Specifies whether minor engine upgrades are applied automatically to
@@ -4683,6 +4723,8 @@ module Aws::RDS
     #
     #   Valid Values:
     #
+    #   * RDS for Db2 - `bring-your-own-license`
+    #
     #   * RDS for MariaDB - `general-public-license`
     #
     #   * RDS for Microsoft SQL Server - `license-included`
@@ -4704,7 +4746,7 @@ module Aws::RDS
     #
     #   Constraints:
     #
-    #   * For RDS for MariaDB, MySQL, Oracle, and PostgreSQL - Must be a
+    #   * For RDS for Db2, MariaDB, MySQL, Oracle, and PostgreSQL - Must be a
     #     multiple between .5 and 50 of the storage amount for the DB
     #     instance.
     #
@@ -4850,8 +4892,8 @@ module Aws::RDS
     #
     # @option params [String] :domain
     #   The Active Directory directory ID to create the DB instance in.
-    #   Currently, only Microsoft SQL Server, MySQL, Oracle, and PostgreSQL DB
-    #   instances can be created in an Active Directory Domain.
+    #   Currently, you can create only Db2, MySQL, Microsoft SQL Server,
+    #   Oracle, and PostgreSQL DB instances in an Active Directory Domain.
     #
     #   For more information, see [ Kerberos Authentication][1] in the *Amazon
     #   RDS User Guide*.
@@ -5047,9 +5089,9 @@ module Aws::RDS
     #   Amazon RDS returns an error.
     #
     # @option params [Array<String>] :enable_cloudwatch_logs_exports
-    #   The list of log types that need to be enabled for exporting to
-    #   CloudWatch Logs. For more information, see [ Publishing Database Logs
-    #   to Amazon CloudWatch Logs][1] in the *Amazon RDS User Guide*.
+    #   The list of log types to enable for exporting to CloudWatch Logs. For
+    #   more information, see [ Publishing Database Logs to Amazon CloudWatch
+    #   Logs][1] in the *Amazon RDS User Guide*.
     #
     #   This setting doesn't apply to the following DB instances:
     #
@@ -5060,6 +5102,8 @@ module Aws::RDS
     #
     #   The following values are valid for each DB engine:
     #
+    #   * RDS for Db2 - `diag.log | notify.log`
+    #
     #   * RDS for MariaDB - `audit | error | general | slowquery`
     #
     #   * RDS for Microsoft SQL Server - `agent | error`
@@ -5162,7 +5206,7 @@ module Aws::RDS
     # @option params [String] :backup_target
     #   The location for storing automated backups and manual snapshots.
     #
-    #   Valie Values:
+    #   Valid Values:
     #
     #   * `outposts` (Amazon Web Services Outposts)
     #
@@ -5651,11 +5695,12 @@ module Aws::RDS
 
     # Creates a new DB instance that acts as a read replica for an existing
     # source DB instance or Multi-AZ DB cluster. You can create a read
-    # replica for a DB instance running MySQL, MariaDB, Oracle, PostgreSQL,
-    # or SQL Server. You can create a read replica for a Multi-AZ DB cluster
-    # running MySQL or PostgreSQL. For more information, see [Working with
-    # read replicas][1] and [Migrating from a Multi-AZ DB cluster to a DB
-    # instance using a read replica][2] in the *Amazon RDS User Guide*.
+    # replica for a DB instance running Db2, MariaDB, MySQL, Oracle,
+    # PostgreSQL, or SQL Server. You can create a read replica for a
+    # Multi-AZ DB cluster running MySQL or PostgreSQL. For more information,
+    # see [Working with read replicas][1] and [Migrating from a Multi-AZ DB
+    # cluster to a DB instance using a read replica][2] in the *Amazon RDS
+    # User Guide*.
     #
     # Amazon Aurora doesn't support this operation. To create a DB instance
     # for an Aurora DB cluster, use the `CreateDBInstance` operation.
@@ -5684,7 +5729,7 @@ module Aws::RDS
     #
     #   Constraints:
     #
-    #   * Must be the identifier of an existing MySQL, MariaDB, Oracle,
+    #   * Must be the identifier of an existing Db2, MariaDB, MySQL, Oracle,
     #     PostgreSQL, or SQL Server DB instance.
     #
     #   * Can't be specified if the `SourceDBClusterIdentifier` parameter is
@@ -6643,7 +6688,9 @@ module Aws::RDS
     #
     #   * `aurora-postgresql`
     #
-    #   * `mariadb`
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
     #
     #   * `mysql`
     #
@@ -7765,11 +7812,14 @@ module Aws::RDS
     #   Example: `myoptiongroup`
     #
     # @option params [required, String] :engine_name
-    #   Specifies the name of the engine that this option group should be
-    #   associated with.
+    #   The name of the engine to associate this option group with.
     #
     #   Valid Values:
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -11971,6 +12021,10 @@ module Aws::RDS
     #
     #   * `custom-oracle-ee`
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -14180,6 +14234,10 @@ module Aws::RDS
     #
     #   * `custom-oracle-ee-19`
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb10.2`
     #
     #   * `mariadb10.3`
@@ -15121,14 +15179,17 @@ module Aws::RDS
       req.send_request(options)
     end
 
-    # Describes all available options.
+    # Describes all available options for the specified engine.
     #
     # @option params [required, String] :engine_name
-    #   A required parameter. Options available for the given engine name are
-    #   described.
+    #   The name of the engine to describe options for.
     #
     #   Valid Values:
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -15318,11 +15379,15 @@ module Aws::RDS
     #   Constraints: Minimum 20, maximum 100.
     #
     # @option params [String] :engine_name
-    #   Filters the list of option groups to only include groups associated
-    #   with a specific database engine.
+    #   A filter to only include option groups associated with this database
+    #   engine.
     #
     #   Valid Values:
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -15446,11 +15511,10 @@ module Aws::RDS
       req.send_request(options)
     end
 
-    # Returns a list of orderable DB instance options for the specified DB
-    # engine, DB engine version, and DB instance class.
+    # Describes the orderable DB instance options for a specified DB engine.
     #
     # @option params [required, String] :engine
-    #   The name of the engine to retrieve DB instance options for.
+    #   The name of the engine to describe DB instance options for.
     #
     #   Valid Values:
     #
@@ -15460,6 +15524,10 @@ module Aws::RDS
     #
     #   * `custom-oracle-ee`
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -15483,28 +15551,28 @@ module Aws::RDS
     #   * `sqlserver-web`
     #
     # @option params [String] :engine_version
-    #   The engine version filter value. Specify this parameter to show only
-    #   the available offerings matching the specified engine version.
+    #   A filter to include only the available options for the specified
+    #   engine version.
     #
     # @option params [String] :db_instance_class
-    #   The DB instance class filter value. Specify this parameter to show
-    #   only the available offerings matching the specified DB instance class.
+    #   A filter to include only the available options for the specified DB
+    #   instance class.
     #
     # @option params [String] :license_model
-    #   The license model filter value. Specify this parameter to show only
-    #   the available offerings matching the specified license model.
+    #   A filter to include only the available options for the specified
+    #   license model.
     #
     #   RDS Custom supports only the BYOL licensing model.
     #
     # @option params [String] :availability_zone_group
     #   The Availability Zone group associated with a Local Zone. Specify this
-    #   parameter to retrieve available offerings for the Local Zones in the
+    #   parameter to retrieve available options for the Local Zones in the
     #   group.
     #
-    #   Omit this parameter to show the available offerings in the specified
+    #   Omit this parameter to show the available options in the specified
     #   Amazon Web Services Region.
     #
-    #   This setting doesn't apply to RDS Custom.
+    #   This setting doesn't apply to RDS Custom DB instances.
     #
     # @option params [Boolean] :vpc
     #   Specifies whether to show only VPC or non-VPC offerings. RDS Custom
@@ -17192,7 +17260,7 @@ module Aws::RDS
     # scaling points, see [ Autoscaling for Aurora Serverless v1][2] in the
     # *Amazon Aurora User Guide*.
     #
-    # <note markdown="1"> This action only applies to Aurora Serverless v1 DB clusters.
+    # <note markdown="1"> This operation only applies to Aurora Serverless v1 DB clusters.
     #
     #  </note>
     #
@@ -18432,7 +18500,7 @@ module Aws::RDS
 
     # Modifies the properties of an endpoint in an Amazon Aurora DB cluster.
     #
-    # <note markdown="1"> This action only applies to Aurora DB clusters.
+    # <note markdown="1"> This operation only applies to Aurora DB clusters.
     #
     #  </note>
     #
@@ -18539,7 +18607,7 @@ module Aws::RDS
     # After you create a DB cluster parameter group, you should wait at
     # least 5 minutes before creating your first DB cluster that uses that
     # DB cluster parameter group as the default parameter group. This allows
-    # Amazon RDS to fully complete the create action before the parameter
+    # Amazon RDS to fully complete the create operation before the parameter
     # group is used as the default for a new DB cluster. This is especially
     # important for parameters that are critical when creating the default
     # database for a DB cluster, such as the character set for the default
@@ -18797,7 +18865,7 @@ module Aws::RDS
     #   The new amount of storage in gibibytes (GiB) to allocate for the DB
     #   instance.
     #
-    #   For RDS for MariaDB, RDS for MySQL, RDS for Oracle, and RDS for
+    #   For RDS for Db2, MariaDB, RDS for MySQL, RDS for Oracle, and RDS for
     #   PostgreSQL, the value supplied must be at least 10% greater than the
     #   current value. Values that are not at least 10% greater than the
     #   existing value are rounded up so that they are 10% greater than the
@@ -18923,7 +18991,7 @@ module Aws::RDS
     #   element exists in the `PendingModifiedValues` element of the operation
     #   response.
     #
-    #   <note markdown="1"> Amazon RDS API operations never return the password, so this action
+    #   <note markdown="1"> Amazon RDS API operations never return the password, so this operation
     #   provides a way to regain access to a primary instance user if the
     #   password is lost. This includes restoring privileges that might have
     #   been accidentally revoked.
@@ -18944,10 +19012,13 @@ module Aws::RDS
     #   * Can't be specified if `ManageMasterUserPassword` is turned on.
     #
     #   * Can include any printable ASCII character except "/", """, or
-    #     "@".
+    #     "@". For RDS for Oracle, can't include the "&amp;" (ampersand)
+    #     or the "'" (single quotes) character.
     #
     #   Length Constraints:
     #
+    #   * RDS for Db2 - Must contain from 8 to 255 characters.
+    #
     #   * RDS for MariaDB - Must contain from 8 to 41 characters.
     #
     #   * RDS for Microsoft SQL Server - Must contain from 8 to 128
@@ -19152,6 +19223,8 @@ module Aws::RDS
     #
     #   Valid Values:
     #
+    #   * RDS for Db2 - `bring-your-own-license`
+    #
     #   * RDS for MariaDB - `general-public-license`
     #
     #   * RDS for Microsoft SQL Server - `license-included`
@@ -19295,7 +19368,7 @@ module Aws::RDS
     # @option params [String] :domain
     #   The Active Directory directory ID to move the DB instance to. Specify
     #   `none` to remove the instance from its current domain. You must create
-    #   the domain before this operation. Currently, you can create only
+    #   the domain before this operation. Currently, you can create only Db2,
     #   MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances in an
     #   Active Directory Domain.
     #
@@ -19393,6 +19466,8 @@ module Aws::RDS
     #
     #   * Amazon Aurora - `3306`
     #
+    #   * RDS for Db2 - `50000`
+    #
     #   * RDS for MariaDB - `3306`
     #
     #   * RDS for Microsoft SQL Server - `1433`
@@ -20147,14 +20222,14 @@ module Aws::RDS
     # After you modify a DB parameter group, you should wait at least 5
     # minutes before creating your first DB instance that uses that DB
     # parameter group as the default parameter group. This allows Amazon RDS
-    # to fully complete the modify action before the parameter group is used
-    # as the default for a new DB instance. This is especially important for
-    # parameters that are critical when creating the default database for a
-    # DB instance, such as the character set for the default database
-    # defined by the `character_set_database` parameter. You can use the
-    # *Parameter Groups* option of the [Amazon RDS console][1] or the
-    # *DescribeDBParameters* command to verify that your DB parameter group
-    # has been created or modified.
+    # to fully complete the modify operation before the parameter group is
+    # used as the default for a new DB instance. This is especially
+    # important for parameters that are critical when creating the default
+    # database for a DB instance, such as the character set for the default
+    # database defined by the `character_set_database` parameter. You can
+    # use the *Parameter Groups* option of the [Amazon RDS console][1] or
+    # the *DescribeDBParameters* command to verify that your DB parameter
+    # group has been created or modified.
     #
     #
     #
@@ -20485,7 +20560,7 @@ module Aws::RDS
     # can be encrypted or unencrypted, but not shared or public.
     #
     # Amazon RDS supports upgrading DB snapshots for MySQL, PostgreSQL, and
-    # Oracle. This command doesn't apply to RDS Custom.
+    # Oracle. This operation doesn't apply to RDS Custom or RDS for Db2.
     #
     # @option params [required, String] :db_snapshot_identifier
     #   The identifier of the DB snapshot to modify.
@@ -22413,7 +22488,7 @@ module Aws::RDS
     # capability instead of being read-only and receiving data from a
     # primary cluster in a different Region.
     #
-    # <note markdown="1"> This action only applies to Aurora DB clusters.
+    # <note markdown="1"> This operation only applies to Aurora DB clusters.
     #
     #  </note>
     #
@@ -22932,20 +23007,20 @@ module Aws::RDS
     # utility as described in [ Migrating Data from MySQL by Using an Amazon
     # S3 Bucket][1] in the *Amazon Aurora User Guide*.
     #
-    # <note markdown="1"> This action only restores the DB cluster, not the DB instances for
-    # that DB cluster. You must invoke the `CreateDBInstance` action to
+    # <note markdown="1"> This operation only restores the DB cluster, not the DB instances for
+    # that DB cluster. You must invoke the `CreateDBInstance` operation to
     # create DB instances for the restored DB cluster, specifying the
     # identifier of the restored DB cluster in `DBClusterIdentifier`. You
-    # can create DB instances only after the `RestoreDBClusterFromS3` action
-    # has completed and the DB cluster is available.
+    # can create DB instances only after the `RestoreDBClusterFromS3`
+    # operation has completed and the DB cluster is available.
     #
     #  </note>
     #
     # For more information on Amazon Aurora, see [ What is Amazon
     # Aurora?][2] in the *Amazon Aurora User Guide*.
     #
-    # <note markdown="1"> This action only applies to Aurora DB clusters. The source DB engine
-    # must be MySQL.
+    # <note markdown="1"> This operation only applies to Aurora DB clusters. The source DB
+    # engine must be MySQL.
     #
     #  </note>
     #
@@ -23591,12 +23666,12 @@ module Aws::RDS
     # default configuration. If you don't specify a security group, the new
     # DB cluster is associated with the default security group.
     #
-    # <note markdown="1"> This action only restores the DB cluster, not the DB instances for
-    # that DB cluster. You must invoke the `CreateDBInstance` action to
+    # <note markdown="1"> This operation only restores the DB cluster, not the DB instances for
+    # that DB cluster. You must invoke the `CreateDBInstance` operation to
     # create DB instances for the restored DB cluster, specifying the
     # identifier of the restored DB cluster in `DBClusterIdentifier`. You
     # can create DB instances only after the `RestoreDBClusterFromSnapshot`
-    # action has completed and the DB cluster is available.
+    # operation has completed and the DB cluster is available.
     #
     #  </note>
     #
@@ -24304,12 +24379,12 @@ module Aws::RDS
     # cluster, except that the new DB cluster is created with the default DB
     # security group.
     #
-    # <note markdown="1"> For Aurora, this action only restores the DB cluster, not the DB
+    # <note markdown="1"> For Aurora, this operation only restores the DB cluster, not the DB
     # instances for that DB cluster. You must invoke the `CreateDBInstance`
-    # action to create DB instances for the restored DB cluster, specifying
-    # the identifier of the restored DB cluster in `DBClusterIdentifier`.
-    # You can create DB instances only after the
-    # `RestoreDBClusterToPointInTime` action has completed and the DB
+    # operation to create DB instances for the restored DB cluster,
+    # specifying the identifier of the restored DB cluster in
+    # `DBClusterIdentifier`. You can create DB instances only after the
+    # `RestoreDBClusterToPointInTime` operation has completed and the DB
     # cluster is available.
     #
     #  </note>
@@ -24995,13 +25070,13 @@ module Aws::RDS
     #
     # If you want to replace your original DB instance with the new,
     # restored DB instance, then rename your original DB instance before you
-    # call the RestoreDBInstanceFromDBSnapshot action. RDS doesn't allow
-    # two DB instances with the same name. After you have renamed your
+    # call the `RestoreDBInstanceFromDBSnapshot` operation. RDS doesn't
+    # allow two DB instances with the same name. After you have renamed your
     # original DB instance with a different identifier, then you can pass
-    # the original name of the DB instance as the DBInstanceIdentifier in
-    # the call to the RestoreDBInstanceFromDBSnapshot action. The result is
-    # that you replace the original DB instance with the DB instance created
-    # from the snapshot.
+    # the original name of the DB instance as the `DBInstanceIdentifier` in
+    # the call to the `RestoreDBInstanceFromDBSnapshot` operation. The
+    # result is that you replace the original DB instance with the DB
+    # instance created from the snapshot.
     #
     # If you are restoring from a shared manual DB snapshot, the
     # `DBSnapshotIdentifier` must be the ARN of the shared DB snapshot.
@@ -25012,16 +25087,16 @@ module Aws::RDS
     #  </note>
     #
     # @option params [required, String] :db_instance_identifier
-    #   Name of the DB instance to create from the DB snapshot. This parameter
-    #   isn't case-sensitive.
+    #   The name of the DB instance to create from the DB snapshot. This
+    #   parameter isn't case-sensitive.
     #
     #   Constraints:
     #
-    #   * Must contain from 1 to 63 numbers, letters, or hyphens
+    #   * Must contain from 1 to 63 numbers, letters, or hyphens.
     #
-    #   * First character must be a letter
+    #   * First character must be a letter.
     #
-    #   * Can't end with a hyphen or contain two consecutive hyphens
+    #   * Can't end with a hyphen or contain two consecutive hyphens.
     #
     #   Example: `my-snapshot-id`
     #
@@ -25030,7 +25105,7 @@ module Aws::RDS
     #
     #   Constraints:
     #
-    #   * Must match the identifier of an existing DBSnapshot.
+    #   * Must match the identifier of an existing DB snapshot.
     #
     #   * Can't be specified when `DBClusterSnapshotIdentifier` is specified.
     #
@@ -25071,10 +25146,13 @@ module Aws::RDS
     #   Example: `us-east-1a`
     #
     # @option params [String] :db_subnet_group_name
-    #   The DB subnet group name to use for the new instance.
+    #   The name of the DB subnet group to use for the new instance.
     #
-    #   Constraints: If supplied, must match the name of an existing
-    #   DBSubnetGroup.
+    #   Constraints:
+    #
+    #   * If supplied, must match the name of an existing DB subnet group.
+    #
+    #   ^
     #
     #   Example: `mydbsubnetgroup`
     #
@@ -25120,10 +25198,11 @@ module Aws::RDS
     #   `general-public-license`
     #
     # @option params [String] :db_name
-    #   The database name for the restored DB instance.
+    #   The name of the database for the restored DB instance.
     #
-    #   This parameter doesn't apply to the MySQL, PostgreSQL, or MariaDB
-    #   engines. It also doesn't apply to RDS Custom DB instances.
+    #   This parameter only applies to RDS for Oracle and RDS for SQL Server
+    #   DB instances. It doesn't apply to the other engines or to RDS Custom
+    #   DB instances.
     #
     # @option params [String] :engine
     #   The database engine to use for the new instance.
@@ -25138,6 +25217,10 @@ module Aws::RDS
     #
     #   Valid Values:
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -25225,10 +25308,10 @@ module Aws::RDS
     #   VPC.
     #
     # @option params [String] :domain
-    #   Specify the Active Directory directory ID to restore the DB instance
-    #   in. The domain/ must be created prior to this operation. Currently,
-    #   you can create only MySQL, Microsoft SQL Server, Oracle, and
-    #   PostgreSQL DB instances in an Active Directory Domain.
+    #   The Active Directory directory ID to restore the DB instance in. The
+    #   domain/ must be created prior to this operation. Currently, you can
+    #   create only Db2, MySQL, Microsoft SQL Server, Oracle, and PostgreSQL
+    #   DB instances in an Active Directory Domain.
     #
     #   For more information, see [ Kerberos Authentication][1] in the *Amazon
     #   RDS User Guide*.
@@ -25329,10 +25412,10 @@ module Aws::RDS
     #   [1]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/UsingWithRDS.IAMDBAuth.html
     #
     # @option params [Array<String>] :enable_cloudwatch_logs_exports
-    #   The list of logs that the restored DB instance is to export to
-    #   CloudWatch Logs. The values in the list depend on the DB engine being
-    #   used. For more information, see [Publishing Database Logs to Amazon
-    #   CloudWatch Logs][1] in the *Amazon RDS User Guide*.
+    #   The list of logs for the restored DB instance to export to CloudWatch
+    #   Logs. The values in the list depend on the DB engine. For more
+    #   information, see [Publishing Database Logs to Amazon CloudWatch
+    #   Logs][1] in the *Amazon RDS User Guide*.
     #
     #   This setting doesn't apply to RDS Custom.
     #
@@ -25362,7 +25445,7 @@ module Aws::RDS
     #
     #   Constraints:
     #
-    #   * If supplied, must match the name of an existing DBParameterGroup.
+    #   * If supplied, must match the name of an existing DB parameter group.
     #
     #   * Must be 1 to 255 letters, numbers, or hyphens.
     #
@@ -25783,7 +25866,7 @@ module Aws::RDS
     # instance running MySQL. For more information, see [Importing Data into
     # an Amazon RDS MySQL DB Instance][1] in the *Amazon RDS User Guide.*
     #
-    # This command doesn't apply to RDS Custom.
+    # This operation doesn't apply to RDS Custom.
     #
     #
     #
@@ -25848,31 +25931,30 @@ module Aws::RDS
     #   * Can't be a reserved word for the chosen database engine.
     #
     # @option params [String] :master_user_password
-    #   The password for the master user. The password can include any
-    #   printable ASCII character except "/", """, or "@".
-    #
-    #   Constraints: Can't be specified if `ManageMasterUserPassword` is
-    #   turned on.
+    #   The password for the master user.
     #
-    #   **MariaDB**
+    #   Constraints:
     #
-    #   Constraints: Must contain from 8 to 41 characters.
+    #   * Can't be specified if `ManageMasterUserPassword` is turned on.
     #
-    #   **Microsoft SQL Server**
+    #   * Can include any printable ASCII character except "/", """, or
+    #     "@". For RDS for Oracle, can't include the "&amp;" (ampersand)
+    #     or the "'" (single quotes) character.
     #
-    #   Constraints: Must contain from 8 to 128 characters.
+    #   Length Constraints:
     #
-    #   **MySQL**
+    #   * RDS for Db2 - Must contain from 8 to 128 characters.
     #
-    #   Constraints: Must contain from 8 to 41 characters.
+    #   * RDS for MariaDB - Must contain from 8 to 41 characters.
     #
-    #   **Oracle**
+    #   * RDS for Microsoft SQL Server - Must contain from 8 to 128
+    #     characters.
     #
-    #   Constraints: Must contain from 8 to 30 characters.
+    #   * RDS for MySQL - Must contain from 8 to 41 characters.
     #
-    #   **PostgreSQL**
+    #   * RDS for Oracle - Must contain from 8 to 30 characters.
     #
-    #   Constraints: Must contain from 8 to 128 characters.
+    #   * RDS for PostgreSQL - Must contain from 8 to 128 characters.
     #
     # @option params [Array<String>] :db_security_groups
     #   A list of DB security groups to associate with this DB instance.
@@ -26531,8 +26613,8 @@ module Aws::RDS
     # case, the instance becomes a mirrored deployment and not a single-AZ
     # deployment.
     #
-    # <note markdown="1"> This command doesn't apply to Aurora MySQL and Aurora PostgreSQL. For
-    # Aurora, use `RestoreDBClusterToPointInTime`.
+    # <note markdown="1"> This operation doesn't apply to Aurora MySQL and Aurora PostgreSQL.
+    # For Aurora, use `RestoreDBClusterToPointInTime`.
     #
     #  </note>
     #
@@ -26677,10 +26759,15 @@ module Aws::RDS
     # @option params [String] :db_name
     #   The database name for the restored DB instance.
     #
-    #   <note markdown="1"> This parameter isn't supported for the MySQL or MariaDB engines. It
-    #   also doesn't apply to RDS Custom.
+    #   This parameter doesn't apply to the following DB instances:
     #
-    #    </note>
+    #   * RDS Custom
+    #
+    #   * RDS for Db2
+    #
+    #   * RDS for MariaDB
+    #
+    #   * RDS for MySQL
     #
     # @option params [String] :engine
     #   The database engine to use for the new instance.
@@ -26689,6 +26776,10 @@ module Aws::RDS
     #
     #   Valid Values:
     #
+    #   * `db2-ae`
+    #
+    #   * `db2-se`
+    #
     #   * `mariadb`
     #
     #   * `mysql`
@@ -26994,11 +27085,16 @@ module Aws::RDS
     #   [1]: https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/custom-setup-orcl.html#custom-setup-orcl.iam-vpc
     #
     # @option params [String] :backup_target
-    #   Specifies where automated backups and manual snapshots are stored for
+    #   The location for storing automated backups and manual snapshots for
     #   the restored DB instance.
     #
-    #   Possible values are `outposts` (Amazon Web Services Outposts) and
-    #   `region` (Amazon Web Services Region). The default is `region`.
+    #   Valid Values:
+    #
+    #   * `outposts` (Amazon Web Services Outposts)
+    #
+    #   * `region` (Amazon Web Services Region)
+    #
+    #   Default: `region`
     #
     #   For more information, see [Working with Amazon RDS on Amazon Web
     #   Services Outposts][1] in the *Amazon RDS User Guide*.
@@ -27579,12 +27675,12 @@ module Aws::RDS
 
     # Starts an Amazon Aurora DB cluster that was stopped using the Amazon
     # Web Services console, the stop-db-cluster CLI command, or the
-    # StopDBCluster action.
+    # `StopDBCluster` operation.
     #
     # For more information, see [ Stopping and Starting an Aurora
     # Cluster][1] in the *Amazon Aurora User Guide*.
     #
-    # <note markdown="1"> This action only applies to Aurora DB clusters.
+    # <note markdown="1"> This operation only applies to Aurora DB clusters.
     #
     #  </note>
     #
@@ -27773,7 +27869,7 @@ module Aws::RDS
 
     # Starts an Amazon RDS DB instance that was stopped using the Amazon Web
     # Services console, the stop-db-instance CLI command, or the
-    # StopDBInstance action.
+    # `StopDBInstance` operation.
     #
     # For more information, see [ Starting an Amazon RDS DB instance That
     # Was Previously Stopped][1] in the *Amazon RDS User Guide.*
@@ -28149,7 +28245,7 @@ module Aws::RDS
     # Starts an export of DB snapshot or DB cluster data to Amazon S3. The
     # provided IAM role must have access to the S3 bucket.
     #
-    # You can't export snapshot data from RDS Custom DB instances.
+    # You can't export snapshot data from Db2 or RDS Custom DB instances.
     #
     # You can't export cluster data from Multi-AZ DB clusters.
     #
@@ -28343,7 +28439,7 @@ module Aws::RDS
 
     # Stops a database activity stream that was started using the Amazon Web
     # Services console, the `start-activity-stream` CLI command, or the
-    # `StartActivityStream` action.
+    # `StartActivityStream` operation.
     #
     # For more information, see [ Monitoring Amazon Aurora with Database
     # Activity Streams][1] in the *Amazon Aurora User Guide* or [ Monitoring
@@ -28418,7 +28514,7 @@ module Aws::RDS
     # For more information, see [ Stopping and Starting an Aurora
     # Cluster][1] in the *Amazon Aurora User Guide*.
     #
-    # <note markdown="1"> This action only applies to Aurora DB clusters.
+    # <note markdown="1"> This operation only applies to Aurora DB clusters.
     #
     #  </note>
     #
@@ -29442,7 +29538,7 @@ module Aws::RDS
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-rds'
-      context[:gem_version] = '1.206.0'
+      context[:gem_version] = '1.208.0'
       Seahorse::Client::Request.new(handlers, context)
     end