aws-sdk-cloudwatchevents 1.58.0 → 1.59.0

data/lib/aws-sdk-cloudwatchevents/types.rb

@@ -10,13 +10,6 @@
 module Aws::CloudWatchEvents
   module Types
 
-    # @note When making an API call, you may pass ActivateEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the partner event source to activate.
     #   @return [String]
@@ -141,15 +134,6 @@ module Aws::CloudWatchEvents
     # task, and whether a public IP address is to be used. This structure is
     # relevant only for ECS tasks that use the `awsvpc` network mode.
     #
-    # @note When making an API call, you may pass AwsVpcConfiguration
-    #   data as a hash:
-    #
-    #       {
-    #         subnets: ["String"], # required
-    #         security_groups: ["String"],
-    #         assign_public_ip: "ENABLED", # accepts ENABLED, DISABLED
-    #       }
-    #
     # @!attribute [rw] subnets
     #   Specifies the subnets associated with the task. These subnets must
     #   all be in the same VPC. You can specify as many as 16 subnets.
@@ -183,13 +167,6 @@ module Aws::CloudWatchEvents
     # array properties for a job, it becomes an array job. This parameter is
     # used only if the target is an Batch job.
     #
-    # @note When making an API call, you may pass BatchArrayProperties
-    #   data as a hash:
-    #
-    #       {
-    #         size: 1,
-    #       }
-    #
     # @!attribute [rw] size
     #   The size of the array, if this is an array batch job. Valid values
     #   are integers between 2 and 10,000.
@@ -205,20 +182,6 @@ module Aws::CloudWatchEvents
 
     # The custom parameters to be used when the target is an Batch job.
     #
-    # @note When making an API call, you may pass BatchParameters
-    #   data as a hash:
-    #
-    #       {
-    #         job_definition: "String", # required
-    #         job_name: "String", # required
-    #         array_properties: {
-    #           size: 1,
-    #         },
-    #         retry_strategy: {
-    #           attempts: 1,
-    #         },
-    #       }
-    #
     # @!attribute [rw] job_definition
     #   The ARN or name of the job definition to use if the event target is
     #   an Batch job. This job definition must already exist.
@@ -259,13 +222,6 @@ module Aws::CloudWatchEvents
     # job. If you specify a retry strategy here, it overrides the retry
     # strategy defined in the job definition.
     #
-    # @note When making an API call, you may pass BatchRetryStrategy
-    #   data as a hash:
-    #
-    #       {
-    #         attempts: 1,
-    #       }
-    #
     # @!attribute [rw] attempts
     #   The number of times to attempt to retry, if the job fails. Valid
     #   values are 1–10.
@@ -279,13 +235,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CancelReplayRequest
-    #   data as a hash:
-    #
-    #       {
-    #         replay_name: "ReplayName", # required
-    #       }
-    #
     # @!attribute [rw] replay_name
     #   The name of the replay to cancel.
     #   @return [String]
@@ -327,15 +276,6 @@ module Aws::CloudWatchEvents
     #
     # [1]: https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_CapacityProviderStrategyItem.html
     #
-    # @note When making an API call, you may pass CapacityProviderStrategyItem
-    #   data as a hash:
-    #
-    #       {
-    #         capacity_provider: "CapacityProvider", # required
-    #         weight: 1,
-    #         base: 1,
-    #       }
-    #
     # @!attribute [rw] capacity_provider
     #   The short name of the capacity provider.
     #   @return [String]
@@ -381,15 +321,6 @@ module Aws::CloudWatchEvents
     # `'\{"Type" : "StringEquals", "Key": "aws:PrincipalOrgID", "Value":
     # "o-1234567890"\}'`
     #
-    # @note When making an API call, you may pass Condition
-    #   data as a hash:
-    #
-    #       {
-    #         type: "String", # required
-    #         key: "String", # required
-    #         value: "String", # required
-    #       }
-    #
     # @!attribute [rw] type
     #   Specifies the type of condition. Currently the only supported value
     #   is `StringEquals`.
@@ -529,15 +460,6 @@ module Aws::CloudWatchEvents
     # additional body parameters per request. An event payload cannot exceed
     # 64 KB.
     #
-    # @note When making an API call, you may pass ConnectionBodyParameter
-    #   data as a hash:
-    #
-    #       {
-    #         key: "String",
-    #         value: "String",
-    #         is_value_secret: false,
-    #       }
-    #
     # @!attribute [rw] key
     #   The key for the parameter.
     #   @return [String]
@@ -564,15 +486,6 @@ module Aws::CloudWatchEvents
     # additional header parameters per request. An event payload cannot
     # exceed 64 KB.
     #
-    # @note When making an API call, you may pass ConnectionHeaderParameter
-    #   data as a hash:
-    #
-    #       {
-    #         key: "HeaderKey",
-    #         value: "HeaderValue",
-    #         is_value_secret: false,
-    #       }
-    #
     # @!attribute [rw] key
     #   The key for the parameter.
     #   @return [String]
@@ -597,33 +510,6 @@ module Aws::CloudWatchEvents
 
     # Contains additional parameters for the connection.
     #
-    # @note When making an API call, you may pass ConnectionHttpParameters
-    #   data as a hash:
-    #
-    #       {
-    #         header_parameters: [
-    #           {
-    #             key: "HeaderKey",
-    #             value: "HeaderValue",
-    #             is_value_secret: false,
-    #           },
-    #         ],
-    #         query_string_parameters: [
-    #           {
-    #             key: "QueryStringKey",
-    #             value: "QueryStringValue",
-    #             is_value_secret: false,
-    #           },
-    #         ],
-    #         body_parameters: [
-    #           {
-    #             key: "String",
-    #             value: "String",
-    #             is_value_secret: false,
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] header_parameters
     #   Contains additional header parameters for the connection.
     #   @return [Array<Types::ConnectionHeaderParameter>]
@@ -700,15 +586,6 @@ module Aws::CloudWatchEvents
     # additional parameter counts towards the event payload size, which
     # cannot exceed 64 KB.
     #
-    # @note When making an API call, you may pass ConnectionQueryStringParameter
-    #   data as a hash:
-    #
-    #       {
-    #         key: "QueryStringKey",
-    #         value: "QueryStringValue",
-    #         is_value_secret: false,
-    #       }
-    #
     # @!attribute [rw] key
     #   The key for a query string parameter.
     #   @return [String]
@@ -731,18 +608,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CreateApiDestinationRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ApiDestinationName", # required
-    #         description: "ApiDestinationDescription",
-    #         connection_arn: "ConnectionArn", # required
-    #         invocation_endpoint: "HttpsEndpoint", # required
-    #         http_method: "POST", # required, accepts POST, GET, HEAD, OPTIONS, PUT, PATCH, DELETE
-    #         invocation_rate_limit_per_second: 1,
-    #       }
-    #
     # @!attribute [rw] name
     #   The name for the API destination to create.
     #   @return [String]
@@ -812,17 +677,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CreateArchiveRequest
-    #   data as a hash:
-    #
-    #       {
-    #         archive_name: "ArchiveName", # required
-    #         event_source_arn: "Arn", # required
-    #         description: "ArchiveDescription",
-    #         event_pattern: "EventPattern",
-    #         retention_days: 1,
-    #       }
-    #
     # @!attribute [rw] archive_name
     #   The name for the archive to create.
     #   @return [String]
@@ -885,14 +739,6 @@ module Aws::CloudWatchEvents
 
     # Contains the API key authorization parameters for the connection.
     #
-    # @note When making an API call, you may pass CreateConnectionApiKeyAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         api_key_name: "AuthHeaderParameters", # required
-    #         api_key_value: "AuthHeaderParameters", # required
-    #       }
-    #
     # @!attribute [rw] api_key_name
     #   The name of the API key to use for authorization.
     #   @return [String]
@@ -912,74 +758,6 @@ module Aws::CloudWatchEvents
 
     # Contains the authorization parameters for the connection.
     #
-    # @note When making an API call, you may pass CreateConnectionAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         basic_auth_parameters: {
-    #           username: "AuthHeaderParameters", # required
-    #           password: "AuthHeaderParameters", # required
-    #         },
-    #         o_auth_parameters: {
-    #           client_parameters: { # required
-    #             client_id: "AuthHeaderParameters", # required
-    #             client_secret: "AuthHeaderParameters", # required
-    #           },
-    #           authorization_endpoint: "HttpsEndpoint", # required
-    #           http_method: "GET", # required, accepts GET, POST, PUT
-    #           o_auth_http_parameters: {
-    #             header_parameters: [
-    #               {
-    #                 key: "HeaderKey",
-    #                 value: "HeaderValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             query_string_parameters: [
-    #               {
-    #                 key: "QueryStringKey",
-    #                 value: "QueryStringValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             body_parameters: [
-    #               {
-    #                 key: "String",
-    #                 value: "String",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #           },
-    #         },
-    #         api_key_auth_parameters: {
-    #           api_key_name: "AuthHeaderParameters", # required
-    #           api_key_value: "AuthHeaderParameters", # required
-    #         },
-    #         invocation_http_parameters: {
-    #           header_parameters: [
-    #             {
-    #               key: "HeaderKey",
-    #               value: "HeaderValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           query_string_parameters: [
-    #             {
-    #               key: "QueryStringKey",
-    #               value: "QueryStringValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           body_parameters: [
-    #             {
-    #               key: "String",
-    #               value: "String",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #         },
-    #       }
-    #
     # @!attribute [rw] basic_auth_parameters
     #   A `CreateConnectionBasicAuthRequestParameters` object that contains
     #   the Basic authorization parameters to use for the connection.
@@ -1016,14 +794,6 @@ module Aws::CloudWatchEvents
 
     # Contains the Basic authorization parameters to use for the connection.
     #
-    # @note When making an API call, you may pass CreateConnectionBasicAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         username: "AuthHeaderParameters", # required
-    #         password: "AuthHeaderParameters", # required
-    #       }
-    #
     # @!attribute [rw] username
     #   The user name to use for Basic authorization.
     #   @return [String]
@@ -1044,14 +814,6 @@ module Aws::CloudWatchEvents
 
     # Contains the Basic authorization parameters to use for the connection.
     #
-    # @note When making an API call, you may pass CreateConnectionOAuthClientRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         client_id: "AuthHeaderParameters", # required
-    #         client_secret: "AuthHeaderParameters", # required
-    #       }
-    #
     # @!attribute [rw] client_id
     #   The client ID to use for OAuth authorization for the connection.
     #   @return [String]
@@ -1072,41 +834,6 @@ module Aws::CloudWatchEvents
 
     # Contains the OAuth authorization parameters to use for the connection.
     #
-    # @note When making an API call, you may pass CreateConnectionOAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         client_parameters: { # required
-    #           client_id: "AuthHeaderParameters", # required
-    #           client_secret: "AuthHeaderParameters", # required
-    #         },
-    #         authorization_endpoint: "HttpsEndpoint", # required
-    #         http_method: "GET", # required, accepts GET, POST, PUT
-    #         o_auth_http_parameters: {
-    #           header_parameters: [
-    #             {
-    #               key: "HeaderKey",
-    #               value: "HeaderValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           query_string_parameters: [
-    #             {
-    #               key: "QueryStringKey",
-    #               value: "QueryStringValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           body_parameters: [
-    #             {
-    #               key: "String",
-    #               value: "String",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #         },
-    #       }
-    #
     # @!attribute [rw] client_parameters
     #   A `CreateConnectionOAuthClientRequestParameters` object that
     #   contains the client parameters for OAuth authorization.
@@ -1137,79 +864,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CreateConnectionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ConnectionName", # required
-    #         description: "ConnectionDescription",
-    #         authorization_type: "BASIC", # required, accepts BASIC, OAUTH_CLIENT_CREDENTIALS, API_KEY
-    #         auth_parameters: { # required
-    #           basic_auth_parameters: {
-    #             username: "AuthHeaderParameters", # required
-    #             password: "AuthHeaderParameters", # required
-    #           },
-    #           o_auth_parameters: {
-    #             client_parameters: { # required
-    #               client_id: "AuthHeaderParameters", # required
-    #               client_secret: "AuthHeaderParameters", # required
-    #             },
-    #             authorization_endpoint: "HttpsEndpoint", # required
-    #             http_method: "GET", # required, accepts GET, POST, PUT
-    #             o_auth_http_parameters: {
-    #               header_parameters: [
-    #                 {
-    #                   key: "HeaderKey",
-    #                   value: "HeaderValue",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #               query_string_parameters: [
-    #                 {
-    #                   key: "QueryStringKey",
-    #                   value: "QueryStringValue",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #               body_parameters: [
-    #                 {
-    #                   key: "String",
-    #                   value: "String",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #             },
-    #           },
-    #           api_key_auth_parameters: {
-    #             api_key_name: "AuthHeaderParameters", # required
-    #             api_key_value: "AuthHeaderParameters", # required
-    #           },
-    #           invocation_http_parameters: {
-    #             header_parameters: [
-    #               {
-    #                 key: "HeaderKey",
-    #                 value: "HeaderValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             query_string_parameters: [
-    #               {
-    #                 key: "QueryStringKey",
-    #                 value: "QueryStringValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             body_parameters: [
-    #               {
-    #                 key: "String",
-    #                 value: "String",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #           },
-    #         },
-    #       }
-    #
     # @!attribute [rw] name
     #   The name for the connection to create.
     #   @return [String]
@@ -1265,20 +919,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CreateEventBusRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventBusName", # required
-    #         event_source_name: "EventSourceName",
-    #         tags: [
-    #           {
-    #             key: "TagKey", # required
-    #             value: "TagValue", # required
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the new event bus.
     #
@@ -1321,14 +961,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass CreatePartnerEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #         account: "AccountId", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the partner event source. This name must be unique and
     #   must be in the format ` partner_name/event_namespace/event_name `.
@@ -1363,13 +995,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeactivateEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the partner event source to deactivate.
     #   @return [String]
@@ -1385,13 +1010,6 @@ module Aws::CloudWatchEvents
     # A `DeadLetterConfig` object that contains information about a
     # dead-letter queue configuration.
     #
-    # @note When making an API call, you may pass DeadLetterConfig
-    #   data as a hash:
-    #
-    #       {
-    #         arn: "ResourceArn",
-    #       }
-    #
     # @!attribute [rw] arn
     #   The ARN of the SQS queue specified as the target for the dead-letter
     #   queue.
@@ -1405,13 +1023,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeauthorizeConnectionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ConnectionName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the connection to remove authorization from.
     #   @return [String]
@@ -1456,13 +1067,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeleteApiDestinationRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ApiDestinationName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the destination to delete.
     #   @return [String]
@@ -1479,13 +1083,6 @@ module Aws::CloudWatchEvents
     #
     class DeleteApiDestinationResponse < Aws::EmptyStructure; end
 
-    # @note When making an API call, you may pass DeleteArchiveRequest
-    #   data as a hash:
-    #
-    #       {
-    #         archive_name: "ArchiveName", # required
-    #       }
-    #
     # @!attribute [rw] archive_name
     #   The name of the archive to delete.
     #   @return [String]
@@ -1502,13 +1099,6 @@ module Aws::CloudWatchEvents
     #
     class DeleteArchiveResponse < Aws::EmptyStructure; end
 
-    # @note When making an API call, you may pass DeleteConnectionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ConnectionName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the connection to delete.
     #   @return [String]
@@ -1555,13 +1145,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeleteEventBusRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventBusName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the event bus to delete.
     #   @return [String]
@@ -1574,14 +1157,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeletePartnerEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #         account: "AccountId", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the event source to delete.
     #   @return [String]
@@ -1600,15 +1175,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DeleteRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #         force: false,
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the rule.
     #   @return [String]
@@ -1637,13 +1203,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeApiDestinationRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ApiDestinationName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the API destination to retrieve.
     #   @return [String]
@@ -1722,13 +1281,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeArchiveRequest
-    #   data as a hash:
-    #
-    #       {
-    #         archive_name: "ArchiveName", # required
-    #       }
-    #
     # @!attribute [rw] archive_name
     #   The name of the archive to retrieve.
     #   @return [String]
@@ -1803,13 +1355,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeConnectionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ConnectionName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the connection to retrieve.
     #   @return [String]
@@ -1885,13 +1430,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeEventBusRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventBusNameOrArn",
-    #       }
-    #
     # @!attribute [rw] name
     #   The name or ARN of the event bus to show details for. If you omit
     #   this, the default event bus is displayed.
@@ -1929,13 +1467,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the partner event source to display the details of.
     #   @return [String]
@@ -1991,13 +1522,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribePartnerEventSourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "EventSourceName", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the event source to display.
     #   @return [String]
@@ -2027,13 +1551,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeReplayRequest
-    #   data as a hash:
-    #
-    #       {
-    #         replay_name: "ReplayName", # required
-    #       }
-    #
     # @!attribute [rw] replay_name
     #   The name of the replay to retrieve.
     #   @return [String]
@@ -2115,14 +1632,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DescribeRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the rule.
     #   @return [String]
@@ -2212,14 +1721,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass DisableRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the rule.
     #   @return [String]
@@ -2241,53 +1742,6 @@ module Aws::CloudWatchEvents
     # The custom parameters to be used when the target is an Amazon ECS
     # task.
     #
-    # @note When making an API call, you may pass EcsParameters
-    #   data as a hash:
-    #
-    #       {
-    #         task_definition_arn: "Arn", # required
-    #         task_count: 1,
-    #         launch_type: "EC2", # accepts EC2, FARGATE, EXTERNAL
-    #         network_configuration: {
-    #           awsvpc_configuration: {
-    #             subnets: ["String"], # required
-    #             security_groups: ["String"],
-    #             assign_public_ip: "ENABLED", # accepts ENABLED, DISABLED
-    #           },
-    #         },
-    #         platform_version: "String",
-    #         group: "String",
-    #         capacity_provider_strategy: [
-    #           {
-    #             capacity_provider: "CapacityProvider", # required
-    #             weight: 1,
-    #             base: 1,
-    #           },
-    #         ],
-    #         enable_ecs_managed_tags: false,
-    #         enable_execute_command: false,
-    #         placement_constraints: [
-    #           {
-    #             type: "distinctInstance", # accepts distinctInstance, memberOf
-    #             expression: "PlacementConstraintExpression",
-    #           },
-    #         ],
-    #         placement_strategy: [
-    #           {
-    #             type: "random", # accepts random, spread, binpack
-    #             field: "PlacementStrategyField",
-    #           },
-    #         ],
-    #         propagate_tags: "TASK_DEFINITION", # accepts TASK_DEFINITION
-    #         reference_id: "ReferenceId",
-    #         tags: [
-    #           {
-    #             key: "TagKey", # required
-    #             value: "TagValue", # required
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] task_definition_arn
     #   The ARN of the task definition to use if the event target is an
     #   Amazon ECS task.
@@ -2420,14 +1874,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass EnableRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the rule.
     #   @return [String]
@@ -2530,19 +1976,6 @@ module Aws::CloudWatchEvents
     # these are merged with any InvocationParameters specified on the
     # Connection, with any values from the Connection taking precedence.
     #
-    # @note When making an API call, you may pass HttpParameters
-    #   data as a hash:
-    #
-    #       {
-    #         path_parameter_values: ["PathParameter"],
-    #         header_parameters: {
-    #           "HeaderKey" => "HeaderValue",
-    #         },
-    #         query_string_parameters: {
-    #           "QueryStringKey" => "QueryStringValue",
-    #         },
-    #       }
-    #
     # @!attribute [rw] path_parameter_values
     #   The path parameter values to be used to populate API Gateway REST
     #   API or EventBridge ApiDestination path wildcards ("*").
@@ -2578,16 +2011,6 @@ module Aws::CloudWatchEvents
     # Contains the parameters needed for you to provide custom input to a
     # target based on one or more pieces of data extracted from the event.
     #
-    # @note When making an API call, you may pass InputTransformer
-    #   data as a hash:
-    #
-    #       {
-    #         input_paths_map: {
-    #           "InputTransformerPathKey" => "TargetInputPath",
-    #         },
-    #         input_template: "TransformerInput", # required
-    #       }
-    #
     # @!attribute [rw] input_paths_map
     #   Map of JSON paths to be extracted from the event. You can then
     #   insert these in the template in `InputTemplate` to produce the
@@ -2691,13 +2114,6 @@ module Aws::CloudWatchEvents
     # not include this parameter, the default is to use the `eventId` as the
     # partition key.
     #
-    # @note When making an API call, you may pass KinesisParameters
-    #   data as a hash:
-    #
-    #       {
-    #         partition_key_path: "TargetPartitionKeyPath", # required
-    #       }
-    #
     # @!attribute [rw] partition_key_path
     #   The JSON path to be extracted from the event and used as the
     #   partition key. For more information, see [Amazon Kinesis Streams Key
@@ -2723,16 +2139,6 @@ module Aws::CloudWatchEvents
     #
     class LimitExceededException < Aws::EmptyStructure; end
 
-    # @note When making an API call, you may pass ListApiDestinationsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "ApiDestinationName",
-    #         connection_arn: "ConnectionArn",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   A name prefix to filter results returned. Only API destinations with
     #   a name that starts with the prefix are returned.
@@ -2781,17 +2187,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListArchivesRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "ArchiveName",
-    #         event_source_arn: "Arn",
-    #         state: "ENABLED", # accepts ENABLED, DISABLED, CREATING, UPDATING, CREATE_FAILED, UPDATE_FAILED
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   A name prefix to filter the archives returned. Only archives with
     #   name that match the prefix are returned.
@@ -2844,16 +2239,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListConnectionsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "ConnectionName",
-    #         connection_state: "CREATING", # accepts CREATING, UPDATING, DELETING, AUTHORIZED, DEAUTHORIZED, AUTHORIZING, DEAUTHORIZING
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   A name prefix to filter results returned. Only connections with a
     #   name that starts with the prefix are returned.
@@ -2902,15 +2287,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListEventBusesRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "EventBusName",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   Specifying this limits the results to only those event buses with
     #   names that start with the specified prefix.
@@ -2955,15 +2331,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListEventSourcesRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "EventSourceNamePrefix",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   Specifying this limits the results to only those partner event
     #   sources with names that start with the specified prefix.
@@ -3008,15 +2375,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListPartnerEventSourceAccountsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         event_source_name: "EventSourceName", # required
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] event_source_name
     #   The name of the partner event source to display account information
     #   about.
@@ -3061,15 +2419,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListPartnerEventSourcesRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "PartnerEventSourceNamePrefix", # required
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   If you specify this, the results are limited to only those partner
     #   event sources that start with the string you specify.
@@ -3114,17 +2463,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListReplaysRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "ReplayName",
-    #         state: "STARTING", # accepts STARTING, RUNNING, CANCELLING, COMPLETED, CANCELLED, FAILED
-    #         event_source_arn: "Arn",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   A name prefix to filter the replays returned. Only replays with name
     #   that match the prefix are returned.
@@ -3178,16 +2516,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListRuleNamesByTargetRequest
-    #   data as a hash:
-    #
-    #       {
-    #         target_arn: "TargetArn", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] target_arn
     #   The Amazon Resource Name (ARN) of the target resource.
     #   @return [String]
@@ -3235,16 +2563,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListRulesRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name_prefix: "RuleName",
-    #         event_bus_name: "EventBusNameOrArn",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] name_prefix
     #   The prefix matching the rule name.
     #   @return [String]
@@ -3292,13 +2610,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListTagsForResourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         resource_arn: "Arn", # required
-    #       }
-    #
     # @!attribute [rw] resource_arn
     #   The ARN of the EventBridge resource for which you want to view tags.
     #   @return [String]
@@ -3324,16 +2635,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass ListTargetsByRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         rule: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #         next_token: "NextToken",
-    #         limit: 1,
-    #       }
-    #
     # @!attribute [rw] rule
     #   The name of the rule.
     #   @return [String]
@@ -3395,17 +2696,6 @@ module Aws::CloudWatchEvents
 
     # This structure specifies the network configuration for an ECS task.
     #
-    # @note When making an API call, you may pass NetworkConfiguration
-    #   data as a hash:
-    #
-    #       {
-    #         awsvpc_configuration: {
-    #           subnets: ["String"], # required
-    #           security_groups: ["String"],
-    #           assign_public_ip: "ENABLED", # accepts ENABLED, DISABLED
-    #         },
-    #       }
-    #
     # @!attribute [rw] awsvpc_configuration
     #   Use this structure to specify the VPC subnets and security groups
     #   for the task, and whether a public IP address is to be used. This
@@ -3494,14 +2784,6 @@ module Aws::CloudWatchEvents
     #
     # [1]: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html
     #
-    # @note When making an API call, you may pass PlacementConstraint
-    #   data as a hash:
-    #
-    #       {
-    #         type: "distinctInstance", # accepts distinctInstance, memberOf
-    #         expression: "PlacementConstraintExpression",
-    #       }
-    #
     # @!attribute [rw] type
     #   The type of constraint. Use distinctInstance to ensure that each
     #   task in a particular group is running on a different container
@@ -3537,14 +2819,6 @@ module Aws::CloudWatchEvents
     #
     # [1]: https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-strategies.html
     #
-    # @note When making an API call, you may pass PlacementStrategy
-    #   data as a hash:
-    #
-    #       {
-    #         type: "random", # accepts random, spread, binpack
-    #         field: "PlacementStrategyField",
-    #       }
-    #
     # @!attribute [rw] type
     #   The type of placement strategy. The random placement strategy
     #   randomly places tasks on available candidates. The spread placement
@@ -3582,23 +2856,6 @@ module Aws::CloudWatchEvents
     #
     class PolicyLengthExceededException < Aws::EmptyStructure; end
 
-    # @note When making an API call, you may pass PutEventsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         entries: [ # required
-    #           {
-    #             time: Time.now,
-    #             source: "String",
-    #             resources: ["EventResource"],
-    #             detail_type: "String",
-    #             detail: "String",
-    #             event_bus_name: "NonPartnerEventBusNameOrArn",
-    #             trace_header: "TraceHeader",
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] entries
     #   The entry that defines an event in your system. You can specify
     #   several parameters for the entry such as the source and type of the
@@ -3615,19 +2872,6 @@ module Aws::CloudWatchEvents
 
     # Represents an event to be submitted.
     #
-    # @note When making an API call, you may pass PutEventsRequestEntry
-    #   data as a hash:
-    #
-    #       {
-    #         time: Time.now,
-    #         source: "String",
-    #         resources: ["EventResource"],
-    #         detail_type: "String",
-    #         detail: "String",
-    #         event_bus_name: "NonPartnerEventBusNameOrArn",
-    #         trace_header: "TraceHeader",
-    #       }
-    #
     # @!attribute [rw] time
     #   The time stamp of the event, per [RFC3339][1]. If no time stamp is
     #   provided, the time stamp of the [PutEvents][2] call is used.
@@ -3734,21 +2978,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass PutPartnerEventsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         entries: [ # required
-    #           {
-    #             time: Time.now,
-    #             source: "EventSourceName",
-    #             resources: ["EventResource"],
-    #             detail_type: "String",
-    #             detail: "String",
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] entries
     #   The list of events to write to the event bus.
     #   @return [Array<Types::PutPartnerEventsRequestEntry>]
@@ -3763,17 +2992,6 @@ module Aws::CloudWatchEvents
 
     # The details about an event generated by an SaaS partner.
     #
-    # @note When making an API call, you may pass PutPartnerEventsRequestEntry
-    #   data as a hash:
-    #
-    #       {
-    #         time: Time.now,
-    #         source: "EventSourceName",
-    #         resources: ["EventResource"],
-    #         detail_type: "String",
-    #         detail: "String",
-    #       }
-    #
     # @!attribute [rw] time
     #   The date and time of the event.
     #   @return [Time]
@@ -3853,22 +3071,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass PutPermissionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         event_bus_name: "NonPartnerEventBusName",
-    #         action: "Action",
-    #         principal: "Principal",
-    #         statement_id: "StatementId",
-    #         condition: {
-    #           type: "String", # required
-    #           key: "String", # required
-    #           value: "String", # required
-    #         },
-    #         policy: "String",
-    #       }
-    #
     # @!attribute [rw] event_bus_name
     #   The name of the event bus associated with the rule. If you omit
     #   this, the default event bus is used.
@@ -3941,25 +3143,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass PutRuleRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "RuleName", # required
-    #         schedule_expression: "ScheduleExpression",
-    #         event_pattern: "EventPattern",
-    #         state: "ENABLED", # accepts ENABLED, DISABLED
-    #         description: "RuleDescription",
-    #         role_arn: "RoleArn",
-    #         tags: [
-    #           {
-    #             key: "TagKey", # required
-    #             value: "TagValue", # required
-    #           },
-    #         ],
-    #         event_bus_name: "EventBusNameOrArn",
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the rule that you are creating or updating.
     #   @return [String]
@@ -4033,128 +3216,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass PutTargetsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         rule: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #         targets: [ # required
-    #           {
-    #             id: "TargetId", # required
-    #             arn: "TargetArn", # required
-    #             role_arn: "RoleArn",
-    #             input: "TargetInput",
-    #             input_path: "TargetInputPath",
-    #             input_transformer: {
-    #               input_paths_map: {
-    #                 "InputTransformerPathKey" => "TargetInputPath",
-    #               },
-    #               input_template: "TransformerInput", # required
-    #             },
-    #             kinesis_parameters: {
-    #               partition_key_path: "TargetPartitionKeyPath", # required
-    #             },
-    #             run_command_parameters: {
-    #               run_command_targets: [ # required
-    #                 {
-    #                   key: "RunCommandTargetKey", # required
-    #                   values: ["RunCommandTargetValue"], # required
-    #                 },
-    #               ],
-    #             },
-    #             ecs_parameters: {
-    #               task_definition_arn: "Arn", # required
-    #               task_count: 1,
-    #               launch_type: "EC2", # accepts EC2, FARGATE, EXTERNAL
-    #               network_configuration: {
-    #                 awsvpc_configuration: {
-    #                   subnets: ["String"], # required
-    #                   security_groups: ["String"],
-    #                   assign_public_ip: "ENABLED", # accepts ENABLED, DISABLED
-    #                 },
-    #               },
-    #               platform_version: "String",
-    #               group: "String",
-    #               capacity_provider_strategy: [
-    #                 {
-    #                   capacity_provider: "CapacityProvider", # required
-    #                   weight: 1,
-    #                   base: 1,
-    #                 },
-    #               ],
-    #               enable_ecs_managed_tags: false,
-    #               enable_execute_command: false,
-    #               placement_constraints: [
-    #                 {
-    #                   type: "distinctInstance", # accepts distinctInstance, memberOf
-    #                   expression: "PlacementConstraintExpression",
-    #                 },
-    #               ],
-    #               placement_strategy: [
-    #                 {
-    #                   type: "random", # accepts random, spread, binpack
-    #                   field: "PlacementStrategyField",
-    #                 },
-    #               ],
-    #               propagate_tags: "TASK_DEFINITION", # accepts TASK_DEFINITION
-    #               reference_id: "ReferenceId",
-    #               tags: [
-    #                 {
-    #                   key: "TagKey", # required
-    #                   value: "TagValue", # required
-    #                 },
-    #               ],
-    #             },
-    #             batch_parameters: {
-    #               job_definition: "String", # required
-    #               job_name: "String", # required
-    #               array_properties: {
-    #                 size: 1,
-    #               },
-    #               retry_strategy: {
-    #                 attempts: 1,
-    #               },
-    #             },
-    #             sqs_parameters: {
-    #               message_group_id: "MessageGroupId",
-    #             },
-    #             http_parameters: {
-    #               path_parameter_values: ["PathParameter"],
-    #               header_parameters: {
-    #                 "HeaderKey" => "HeaderValue",
-    #               },
-    #               query_string_parameters: {
-    #                 "QueryStringKey" => "QueryStringValue",
-    #               },
-    #             },
-    #             redshift_data_parameters: {
-    #               secret_manager_arn: "RedshiftSecretManagerArn",
-    #               database: "Database", # required
-    #               db_user: "DbUser",
-    #               sql: "Sql", # required
-    #               statement_name: "StatementName",
-    #               with_event: false,
-    #             },
-    #             sage_maker_pipeline_parameters: {
-    #               pipeline_parameter_list: [
-    #                 {
-    #                   name: "SageMakerPipelineParameterName", # required
-    #                   value: "SageMakerPipelineParameterValue", # required
-    #                 },
-    #               ],
-    #             },
-    #             dead_letter_config: {
-    #               arn: "ResourceArn",
-    #             },
-    #             retry_policy: {
-    #               maximum_retry_attempts: 1,
-    #               maximum_event_age_in_seconds: 1,
-    #             },
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] rule
     #   The name of the rule.
     #   @return [String]
@@ -4225,18 +3286,6 @@ module Aws::CloudWatchEvents
     # Redshift cluster to invoke the Amazon Redshift Data API
     # ExecuteStatement based on EventBridge events.
     #
-    # @note When making an API call, you may pass RedshiftDataParameters
-    #   data as a hash:
-    #
-    #       {
-    #         secret_manager_arn: "RedshiftSecretManagerArn",
-    #         database: "Database", # required
-    #         db_user: "DbUser",
-    #         sql: "Sql", # required
-    #         statement_name: "StatementName",
-    #         with_event: false,
-    #       }
-    #
     # @!attribute [rw] secret_manager_arn
     #   The name or ARN of the secret that enables access to the database.
     #   Required when authenticating using Amazon Web Services Secrets
@@ -4280,15 +3329,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass RemovePermissionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         statement_id: "StatementId",
-    #         remove_all_permissions: false,
-    #         event_bus_name: "NonPartnerEventBusName",
-    #       }
-    #
     # @!attribute [rw] statement_id
     #   The statement ID corresponding to the account that is no longer
     #   allowed to put events to the default event bus.
@@ -4313,16 +3353,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass RemoveTargetsRequest
-    #   data as a hash:
-    #
-    #       {
-    #         rule: "RuleName", # required
-    #         event_bus_name: "EventBusNameOrArn",
-    #         ids: ["TargetId"], # required
-    #         force: false,
-    #       }
-    #
     # @!attribute [rw] rule
     #   The name of the rule.
     #   @return [String]
@@ -4461,14 +3491,6 @@ module Aws::CloudWatchEvents
 
     # A `ReplayDestination` object that contains details about a replay.
     #
-    # @note When making an API call, you may pass ReplayDestination
-    #   data as a hash:
-    #
-    #       {
-    #         arn: "Arn", # required
-    #         filter_arns: ["Arn"],
-    #       }
-    #
     # @!attribute [rw] arn
     #   The ARN of the event bus to replay event to. You can replay events
     #   only to the event bus specified to create the archive.
@@ -4502,14 +3524,6 @@ module Aws::CloudWatchEvents
     # A `RetryPolicy` object that includes information about the retry
     # policy settings.
     #
-    # @note When making an API call, you may pass RetryPolicy
-    #   data as a hash:
-    #
-    #       {
-    #         maximum_retry_attempts: 1,
-    #         maximum_event_age_in_seconds: 1,
-    #       }
-    #
     # @!attribute [rw] maximum_retry_attempts
     #   The maximum number of retry attempts to make before the request
     #   fails. Retry attempts continue until either the maximum number of
@@ -4609,18 +3623,6 @@ module Aws::CloudWatchEvents
     # This parameter contains the criteria (either InstanceIds or a tag)
     # used to specify which EC2 instances are to be sent the command.
     #
-    # @note When making an API call, you may pass RunCommandParameters
-    #   data as a hash:
-    #
-    #       {
-    #         run_command_targets: [ # required
-    #           {
-    #             key: "RunCommandTargetKey", # required
-    #             values: ["RunCommandTargetValue"], # required
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] run_command_targets
     #   Currently, we support including only one RunCommandTarget block,
     #   which specifies either an array of InstanceIds or a tag.
@@ -4638,14 +3640,6 @@ module Aws::CloudWatchEvents
     # specified as key-value pairs. Each `RunCommandTarget` block can
     # include only one key, but this key may specify multiple values.
     #
-    # @note When making an API call, you may pass RunCommandTarget
-    #   data as a hash:
-    #
-    #       {
-    #         key: "RunCommandTargetKey", # required
-    #         values: ["RunCommandTargetValue"], # required
-    #       }
-    #
     # @!attribute [rw] key
     #   Can be either `tag:` *tag-key* or `InstanceIds`.
     #   @return [String]
@@ -4668,14 +3662,6 @@ module Aws::CloudWatchEvents
     # Name/Value pair of a parameter to start execution of a SageMaker Model
     # Building Pipeline.
     #
-    # @note When making an API call, you may pass SageMakerPipelineParameter
-    #   data as a hash:
-    #
-    #       {
-    #         name: "SageMakerPipelineParameterName", # required
-    #         value: "SageMakerPipelineParameterValue", # required
-    #       }
-    #
     # @!attribute [rw] name
     #   Name of parameter to start execution of a SageMaker Model Building
     #   Pipeline.
@@ -4698,18 +3684,6 @@ module Aws::CloudWatchEvents
     # These are custom parameters to use when the target is a SageMaker
     # Model Building Pipeline that starts based on EventBridge events.
     #
-    # @note When making an API call, you may pass SageMakerPipelineParameters
-    #   data as a hash:
-    #
-    #       {
-    #         pipeline_parameter_list: [
-    #           {
-    #             name: "SageMakerPipelineParameterName", # required
-    #             value: "SageMakerPipelineParameterValue", # required
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] pipeline_parameter_list
     #   List of Parameter names and values for SageMaker Model Building
     #   Pipeline execution.
@@ -4726,13 +3700,6 @@ module Aws::CloudWatchEvents
     # This structure includes the custom parameter to be used when the
     # target is an SQS FIFO queue.
     #
-    # @note When making an API call, you may pass SqsParameters
-    #   data as a hash:
-    #
-    #       {
-    #         message_group_id: "MessageGroupId",
-    #       }
-    #
     # @!attribute [rw] message_group_id
     #   The FIFO message group ID to use as the target.
     #   @return [String]
@@ -4745,21 +3712,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass StartReplayRequest
-    #   data as a hash:
-    #
-    #       {
-    #         replay_name: "ReplayName", # required
-    #         description: "ReplayDescription",
-    #         event_source_arn: "Arn", # required
-    #         event_start_time: Time.now, # required
-    #         event_end_time: Time.now, # required
-    #         destination: { # required
-    #           arn: "Arn", # required
-    #           filter_arns: ["Arn"],
-    #         },
-    #       }
-    #
     # @!attribute [rw] replay_name
     #   The name of the replay to start.
     #   @return [String]
@@ -4832,14 +3784,6 @@ module Aws::CloudWatchEvents
     # A key-value pair associated with an Amazon Web Services resource. In
     # EventBridge, rules and event buses support tagging.
     #
-    # @note When making an API call, you may pass Tag
-    #   data as a hash:
-    #
-    #       {
-    #         key: "TagKey", # required
-    #         value: "TagValue", # required
-    #       }
-    #
     # @!attribute [rw] key
     #   A string you can use to assign a value. The combination of tag keys
     #   and values can help you organize and categorize your resources.
@@ -4858,19 +3802,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass TagResourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         resource_arn: "Arn", # required
-    #         tags: [ # required
-    #           {
-    #             key: "TagKey", # required
-    #             value: "TagValue", # required
-    #           },
-    #         ],
-    #       }
-    #
     # @!attribute [rw] resource_arn
     #   The ARN of the EventBridge resource that you're adding tags to.
     #   @return [String]
@@ -4908,122 +3839,6 @@ module Aws::CloudWatchEvents
     # [1]: https://docs.aws.amazon.com/eventbridge/latest/APIReference/API_PutTargets.html
     # [2]: https://docs.aws.amazon.com/eventbridge/latest/userguide/eventbridge-cross-account-event-delivery.html
     #
-    # @note When making an API call, you may pass Target
-    #   data as a hash:
-    #
-    #       {
-    #         id: "TargetId", # required
-    #         arn: "TargetArn", # required
-    #         role_arn: "RoleArn",
-    #         input: "TargetInput",
-    #         input_path: "TargetInputPath",
-    #         input_transformer: {
-    #           input_paths_map: {
-    #             "InputTransformerPathKey" => "TargetInputPath",
-    #           },
-    #           input_template: "TransformerInput", # required
-    #         },
-    #         kinesis_parameters: {
-    #           partition_key_path: "TargetPartitionKeyPath", # required
-    #         },
-    #         run_command_parameters: {
-    #           run_command_targets: [ # required
-    #             {
-    #               key: "RunCommandTargetKey", # required
-    #               values: ["RunCommandTargetValue"], # required
-    #             },
-    #           ],
-    #         },
-    #         ecs_parameters: {
-    #           task_definition_arn: "Arn", # required
-    #           task_count: 1,
-    #           launch_type: "EC2", # accepts EC2, FARGATE, EXTERNAL
-    #           network_configuration: {
-    #             awsvpc_configuration: {
-    #               subnets: ["String"], # required
-    #               security_groups: ["String"],
-    #               assign_public_ip: "ENABLED", # accepts ENABLED, DISABLED
-    #             },
-    #           },
-    #           platform_version: "String",
-    #           group: "String",
-    #           capacity_provider_strategy: [
-    #             {
-    #               capacity_provider: "CapacityProvider", # required
-    #               weight: 1,
-    #               base: 1,
-    #             },
-    #           ],
-    #           enable_ecs_managed_tags: false,
-    #           enable_execute_command: false,
-    #           placement_constraints: [
-    #             {
-    #               type: "distinctInstance", # accepts distinctInstance, memberOf
-    #               expression: "PlacementConstraintExpression",
-    #             },
-    #           ],
-    #           placement_strategy: [
-    #             {
-    #               type: "random", # accepts random, spread, binpack
-    #               field: "PlacementStrategyField",
-    #             },
-    #           ],
-    #           propagate_tags: "TASK_DEFINITION", # accepts TASK_DEFINITION
-    #           reference_id: "ReferenceId",
-    #           tags: [
-    #             {
-    #               key: "TagKey", # required
-    #               value: "TagValue", # required
-    #             },
-    #           ],
-    #         },
-    #         batch_parameters: {
-    #           job_definition: "String", # required
-    #           job_name: "String", # required
-    #           array_properties: {
-    #             size: 1,
-    #           },
-    #           retry_strategy: {
-    #             attempts: 1,
-    #           },
-    #         },
-    #         sqs_parameters: {
-    #           message_group_id: "MessageGroupId",
-    #         },
-    #         http_parameters: {
-    #           path_parameter_values: ["PathParameter"],
-    #           header_parameters: {
-    #             "HeaderKey" => "HeaderValue",
-    #           },
-    #           query_string_parameters: {
-    #             "QueryStringKey" => "QueryStringValue",
-    #           },
-    #         },
-    #         redshift_data_parameters: {
-    #           secret_manager_arn: "RedshiftSecretManagerArn",
-    #           database: "Database", # required
-    #           db_user: "DbUser",
-    #           sql: "Sql", # required
-    #           statement_name: "StatementName",
-    #           with_event: false,
-    #         },
-    #         sage_maker_pipeline_parameters: {
-    #           pipeline_parameter_list: [
-    #             {
-    #               name: "SageMakerPipelineParameterName", # required
-    #               value: "SageMakerPipelineParameterValue", # required
-    #             },
-    #           ],
-    #         },
-    #         dead_letter_config: {
-    #           arn: "ResourceArn",
-    #         },
-    #         retry_policy: {
-    #           maximum_retry_attempts: 1,
-    #           maximum_event_age_in_seconds: 1,
-    #         },
-    #       }
-    #
     # @!attribute [rw] id
     #   The ID of the target. We recommend using a memorable and unique
     #   string.
@@ -5171,14 +3986,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass TestEventPatternRequest
-    #   data as a hash:
-    #
-    #       {
-    #         event_pattern: "EventPattern", # required
-    #         event: "String", # required
-    #       }
-    #
     # @!attribute [rw] event_pattern
     #   The event pattern. For more information, see [Events and Event
     #   Patterns][1] in the *Amazon EventBridge User Guide*.
@@ -5233,14 +4040,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass UntagResourceRequest
-    #   data as a hash:
-    #
-    #       {
-    #         resource_arn: "Arn", # required
-    #         tag_keys: ["TagKey"], # required
-    #       }
-    #
     # @!attribute [rw] resource_arn
     #   The ARN of the EventBridge resource from which you are removing
     #   tags.
@@ -5263,18 +4062,6 @@ module Aws::CloudWatchEvents
     #
     class UntagResourceResponse < Aws::EmptyStructure; end
 
-    # @note When making an API call, you may pass UpdateApiDestinationRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ApiDestinationName", # required
-    #         description: "ApiDestinationDescription",
-    #         connection_arn: "ConnectionArn",
-    #         invocation_endpoint: "HttpsEndpoint",
-    #         http_method: "POST", # accepts POST, GET, HEAD, OPTIONS, PUT, PATCH, DELETE
-    #         invocation_rate_limit_per_second: 1,
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the API destination to update.
     #   @return [String]
@@ -5341,16 +4128,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass UpdateArchiveRequest
-    #   data as a hash:
-    #
-    #       {
-    #         archive_name: "ArchiveName", # required
-    #         description: "ArchiveDescription",
-    #         event_pattern: "EventPattern",
-    #         retention_days: 1,
-    #       }
-    #
     # @!attribute [rw] archive_name
     #   The name of the archive to update.
     #   @return [String]
@@ -5408,14 +4185,6 @@ module Aws::CloudWatchEvents
     # Contains the API key authorization parameters to use to update the
     # connection.
     #
-    # @note When making an API call, you may pass UpdateConnectionApiKeyAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         api_key_name: "AuthHeaderParameters",
-    #         api_key_value: "AuthHeaderParameters",
-    #       }
-    #
     # @!attribute [rw] api_key_name
     #   The name of the API key to use for authorization.
     #   @return [String]
@@ -5435,74 +4204,6 @@ module Aws::CloudWatchEvents
 
     # Contains the additional parameters to use for the connection.
     #
-    # @note When making an API call, you may pass UpdateConnectionAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         basic_auth_parameters: {
-    #           username: "AuthHeaderParameters",
-    #           password: "AuthHeaderParameters",
-    #         },
-    #         o_auth_parameters: {
-    #           client_parameters: {
-    #             client_id: "AuthHeaderParameters",
-    #             client_secret: "AuthHeaderParameters",
-    #           },
-    #           authorization_endpoint: "HttpsEndpoint",
-    #           http_method: "GET", # accepts GET, POST, PUT
-    #           o_auth_http_parameters: {
-    #             header_parameters: [
-    #               {
-    #                 key: "HeaderKey",
-    #                 value: "HeaderValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             query_string_parameters: [
-    #               {
-    #                 key: "QueryStringKey",
-    #                 value: "QueryStringValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             body_parameters: [
-    #               {
-    #                 key: "String",
-    #                 value: "String",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #           },
-    #         },
-    #         api_key_auth_parameters: {
-    #           api_key_name: "AuthHeaderParameters",
-    #           api_key_value: "AuthHeaderParameters",
-    #         },
-    #         invocation_http_parameters: {
-    #           header_parameters: [
-    #             {
-    #               key: "HeaderKey",
-    #               value: "HeaderValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           query_string_parameters: [
-    #             {
-    #               key: "QueryStringKey",
-    #               value: "QueryStringValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           body_parameters: [
-    #             {
-    #               key: "String",
-    #               value: "String",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #         },
-    #       }
-    #
     # @!attribute [rw] basic_auth_parameters
     #   A `UpdateConnectionBasicAuthRequestParameters` object that contains
     #   the authorization parameters for Basic authorization.
@@ -5536,14 +4237,6 @@ module Aws::CloudWatchEvents
 
     # Contains the Basic authorization parameters for the connection.
     #
-    # @note When making an API call, you may pass UpdateConnectionBasicAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         username: "AuthHeaderParameters",
-    #         password: "AuthHeaderParameters",
-    #       }
-    #
     # @!attribute [rw] username
     #   The user name to use for Basic authorization.
     #   @return [String]
@@ -5564,14 +4257,6 @@ module Aws::CloudWatchEvents
 
     # Contains the OAuth authorization parameters to use for the connection.
     #
-    # @note When making an API call, you may pass UpdateConnectionOAuthClientRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         client_id: "AuthHeaderParameters",
-    #         client_secret: "AuthHeaderParameters",
-    #       }
-    #
     # @!attribute [rw] client_id
     #   The client ID to use for OAuth authorization.
     #   @return [String]
@@ -5592,41 +4277,6 @@ module Aws::CloudWatchEvents
 
     # Contains the OAuth request parameters to use for the connection.
     #
-    # @note When making an API call, you may pass UpdateConnectionOAuthRequestParameters
-    #   data as a hash:
-    #
-    #       {
-    #         client_parameters: {
-    #           client_id: "AuthHeaderParameters",
-    #           client_secret: "AuthHeaderParameters",
-    #         },
-    #         authorization_endpoint: "HttpsEndpoint",
-    #         http_method: "GET", # accepts GET, POST, PUT
-    #         o_auth_http_parameters: {
-    #           header_parameters: [
-    #             {
-    #               key: "HeaderKey",
-    #               value: "HeaderValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           query_string_parameters: [
-    #             {
-    #               key: "QueryStringKey",
-    #               value: "QueryStringValue",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #           body_parameters: [
-    #             {
-    #               key: "String",
-    #               value: "String",
-    #               is_value_secret: false,
-    #             },
-    #           ],
-    #         },
-    #       }
-    #
     # @!attribute [rw] client_parameters
     #   A `UpdateConnectionOAuthClientRequestParameters` object that
     #   contains the client parameters to use for the connection when OAuth
@@ -5658,79 +4308,6 @@ module Aws::CloudWatchEvents
       include Aws::Structure
     end
 
-    # @note When making an API call, you may pass UpdateConnectionRequest
-    #   data as a hash:
-    #
-    #       {
-    #         name: "ConnectionName", # required
-    #         description: "ConnectionDescription",
-    #         authorization_type: "BASIC", # accepts BASIC, OAUTH_CLIENT_CREDENTIALS, API_KEY
-    #         auth_parameters: {
-    #           basic_auth_parameters: {
-    #             username: "AuthHeaderParameters",
-    #             password: "AuthHeaderParameters",
-    #           },
-    #           o_auth_parameters: {
-    #             client_parameters: {
-    #               client_id: "AuthHeaderParameters",
-    #               client_secret: "AuthHeaderParameters",
-    #             },
-    #             authorization_endpoint: "HttpsEndpoint",
-    #             http_method: "GET", # accepts GET, POST, PUT
-    #             o_auth_http_parameters: {
-    #               header_parameters: [
-    #                 {
-    #                   key: "HeaderKey",
-    #                   value: "HeaderValue",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #               query_string_parameters: [
-    #                 {
-    #                   key: "QueryStringKey",
-    #                   value: "QueryStringValue",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #               body_parameters: [
-    #                 {
-    #                   key: "String",
-    #                   value: "String",
-    #                   is_value_secret: false,
-    #                 },
-    #               ],
-    #             },
-    #           },
-    #           api_key_auth_parameters: {
-    #             api_key_name: "AuthHeaderParameters",
-    #             api_key_value: "AuthHeaderParameters",
-    #           },
-    #           invocation_http_parameters: {
-    #             header_parameters: [
-    #               {
-    #                 key: "HeaderKey",
-    #                 value: "HeaderValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             query_string_parameters: [
-    #               {
-    #                 key: "QueryStringKey",
-    #                 value: "QueryStringValue",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #             body_parameters: [
-    #               {
-    #                 key: "String",
-    #                 value: "String",
-    #                 is_value_secret: false,
-    #               },
-    #             ],
-    #           },
-    #         },
-    #       }
-    #
     # @!attribute [rw] name
     #   The name of the connection to update.
     #   @return [String]