avm-tools 0.113.1 → 0.113.5

data/sub/eac_git/vendor/git-subrepo/doc/comparison.swim

@@ -0,0 +1,35 @@
+= Comparing `submodule` and `subrepo`
+
+This document compares Git's `submodule` command to the new `subrepo` command,
+with examples and discussion of all the common operations. I'll use the term
+"External" to mean the general concept of an external repo that might be used
+as a submodule or a subrepo.
+
+= Overview
+
+
+
+= Adding a new External
+
+As an owner or collaborator, you have decided to add a new External to your
+repo:
+
+- Submodule :: `git submodule add git@github.com/user/external`
+- Subtree :: `git subtree --squash --prefix=external git@github.com/user/external`
+- Subrepo :: `git subrepo clone git@github.com/user/external`
+
+/…to be completed…/
+
+= Updating from a changed External
+
+= Pushing External changes upstream
+
+= Moving/Renaming an External
+
+= Making an External on a branch
+
+= Changing the tracking branch of an External
+
+= Removing an External
+
+= Migration from One to the Other

data/sub/eac_git/vendor/git-subrepo/doc/git-subrepo.swim

@@ -0,0 +1,608 @@
+git-subrepo
+===========
+
+Git Submodule Alternative
+
+<badge travis ingydotnet/git-subrepo>
+
+= Synopsis
+
+  git subrepo -h    # Help Overview
+
+  git subrepo clone <remote-url> [<subdir>]
+  git subrepo init <subdir>
+  git subrepo pull <subdir>
+  git subrepo push <subdir>
+
+  git subrepo fetch <subdir>
+  git subrepo branch <subdir>
+  git subrepo commit <subdir>
+  git subrepo config <subdir>
+
+  git subrepo status [<subdir>]
+  git subrepo clean <subdir>
+
+  git subrepo help [<command> | --all]
+  git subrepo version
+  git subrepo upgrade
+
+= Description
+
+This git command "clones" an external git repo into a subdirectory of your
+repo. Later on, upstream changes can be pulled in, and local changes can be
+pushed back. Simple.
+
+= Benefits
+
+This command is an improvement from `git-submodule` and `git-subtree`; two
+other git commands with similar goals, but various problems.
+
+It assumes there are 3 main roles of people interacting with a repo, and
+attempts to serve them all well:
+
+* *owner* - The person who authors\/owns\/maintains a repo.
+* *users* - People who are just using/installing the repo.
+* *collaborators* - People who commit code to the repo and subrepos.
+
+The `git-subrepo` command benefits these roles in the following ways:
+
+* Simple and intuitive commandline usage (with tab completion).
+* Users get your repo and all your subrepos just by cloning your repo.
+* Users do not need to install `git-subrepo`, ever.
+* Collaborators do not need to install unless they want to push/pull.
+* Collaborators know when a subdir is a subrepo (it has a `.gitrepo` file).
+* The `.gitrepo` file never gets pushed back to the subrepo upstream.
+* Well named branches and remotes are generated for manual operations.
+* Owners do not deal with the complications of keeping submodules in sync.
+* Subrepo repositories can contain subrepos themselves.
+* Branching with subrepos JustWorks™.
+* Different branches can have different subrepos in different states, etc.
+* Moving\/renaming\/deleting a subrepo subdir JustWorks™.
+* You can `init` an existing subdirectory into a subrepo.
+* Your git history is kept squeaky clean.
+* Upstream history (clone/pull) is condensed into a single commit.
+* Pulls can use a `merge`, `rebase` or `force` strategies.
+* You can see the subrepo history with `git log subrepo/<subdir>/fetch`.
+* Commits pushed back upstream are *not* condensed (by default).
+* Trivial to try any subrepo operations and then reset back.
+* No configuration required.
+* Does not introduce history that messes up other git commands.
+* Fixes known rebase failures with `git-subtree`.
+
+= Installation
+
+The best short answer is:
+
+  git clone https://github.com/ingydotnet/git-subrepo /path/to/git-subrepo
+  echo 'source /path/to/git-subrepo/.rc' >> ~/.bashrc
+
+The complete "Installation Instructions" can be found below.
+
+Note: git-subrepo needs a git version (> 2.7) that supports worktree:s.
+
+= Commands
+
+All the *subrepo* commands use names of actual Git commands and try to do
+operations that are similar to their Git counterparts. They also attempt to
+give similar output in an attempt to make the subrepo usage intuitive to
+experienced Git users.
+
+Please note that the commands are /not/ exact equivalents, and do not take all
+the same arguments. Keep reading…
+
+- `git subrepo clone <repository> [<subdir>] [-b <branch>] [-f] [-m <msg>] [-e] [--method <merge|rebase>]`
+
+  Add a repository as a subrepo in a subdir of your repository.
+
+  This is similar in feel to `git clone`. You just specify the remote repo
+  url, and optionally a sub-directory and/or branch name. The repo will be
+  fetched and merged into the subdir.
+
+  The subrepo history is /squashed/ into a single commit that contains the
+  reference information. This information is also stored in a special file
+  called `<subdir>/.gitrepo`. The presence of this file indicates that the
+  directory is a subrepo.
+
+  All subsequent commands refer to the subrepo by the name of the /subdir/.
+  From the subdir, all the current information about the subrepo can be
+  obtained.
+
+  The `--force` option will "reclone" (completely replace) an existing subdir.
+
+  The `--method` option will decide how the join process between branches are
+   performed. The default option is merge.
+
+  The `clone` command accepts the `--branch=` `--edit`, `--force` and
+  `--message=` options.
+
+- `git subrepo init <subdir> [-r <remote>] [-b <branch>] [--method <merge|rebase>]`
+
+  Turn an existing subdirectory into a subrepo.
+
+  If you want to expose a subdirectory of your project as a published subrepo,
+  this command will do that. It will split out the content of a normal
+  subdirectory into a branch and start tracking it as a subrepo. Afterwards
+  your original repo will look exactly the same except that there will be a
+  `<subdir>/.gitrepo` file.
+
+  If you specify the `--remote` (and optionally the `--branch`) option, the
+  values will be added to the `<subdir>/.gitrepo` file. The `--remote` option
+  is the upstream URL, and the `--branch` option is the upstream branch to push
+  to. These values will be needed to do a `git subrepo push` command, but they
+  can be provided later on the `push` command (and saved to `<subdir>/.gitrepo`
+  if you also specify the `--update` option).
+
+  Note: You will need to create the empty upstream repo and push to it on your
+  own, using `git subrepo push <subdir>`.
+
+  The `--method` option will decide how the join process between branches
+  are performed. The default option is merge.
+
+  The `init` command accepts the `--branch=` and `--remote=` options.
+
+- `git subrepo pull <subdir>|--all [-M|-R|-f] [-m <msg>] [-e] [-b <branch>] [-r <remote>] [-u]`
+
+  Update the subrepo subdir with the latest upstream changes.
+
+  The `pull` command fetches the latest content from the remote branch pointed
+  to by the subrepo's `.gitrepo` file, and then tries to merge the changes into
+  the corresponding subdir. It does this by making a branch of the local
+  commits to the subdir and then merging or rebasing (see below) it with the
+  fetched upstream content. After the merge, the content of the new branch
+  replaces your subdir, the `.gitrepo` file is updated and a single 'pull'
+  commit is added to your mainline history.
+
+  The `pull` command will attempt to do the following commands in one go:
+
+    git subrepo fetch <subdir>
+    git subrepo branch <subdir>
+    git merge/rebase subrepo/<subdir>/fetch subrepo/<subdir>
+    git subrepo commit <subdir>
+    # Only needed for a consequential push:
+    git update-ref refs/subrepo/<subdir>/pull subrepo/<subdir>
+
+  In other words, you could do all the above commands yourself, for the same
+  effect. If any of the commands fail, subrepo will stop and tell you to finish
+  this by hand. Generally a failure would be in the merge or rebase part, where
+  conflicts can happen. Since Git has lots of ways to resolve conflicts to your
+  personal tastes, the subrepo command defers to letting you do this by hand.
+
+  When pulling new data, the method selected in clone/init is used. This has
+  no effect on the final result of the pull, since it becomes a single commit.
+  But it does affect the resulting `subrepo/<subdir>` branch, which is often
+  used for a subrepo `push` command. See 'push' below for more information.
+  If you want to change the method you can use the `config` command for this.
+
+  When you pull you can assume a fast-forward strategy (default) or you can
+  specify a `--rebase`, `--merge` or `--force` strategy. The latter is the same
+  as a `clone --force` operation, using the current remote and branch.
+
+  Like the `clone` command, `pull` will squash all the changes (since the last
+  pull or clone) into one commit. This keeps your mainline history nice and
+  clean. You can easily see the subrepo's history with the `git log` command:
+
+    git log refs/subrepo/<subdir>/fetch
+
+  The set of commands used above are described in detail below.
+
+  The `pull` command accepts the `--all`, `--branch=`, `--edit`, `--force`,
+  `--message=`, `--remote=` and `--update` options.
+
+- `git subrepo push <subdir>|--all [<branch>] [-r <remote>] [-b <branch>] [-M|-R] [-u] [-f] [-s] [-N]`
+
+  Push a properly merged subrepo branch back upstream.
+
+  This command takes the subrepo branch from a successful pull command and
+  pushes the history back to its designated remote and branch. You can also use
+  the `branch` command and merge things yourself before pushing if you want to
+  (although that is probably a rare use case).
+
+  The `push` command requires a branch that has been properly merged/rebased
+  with the upstream HEAD (unless the upstream HEAD is empty, which is common
+  when doing a first `push` after an `init`). That means the upstream HEAD is
+  one of the commits in the branch.
+
+  By default the branch ref `refs/subrepo/<subdir>/pull` will be pushed, but
+  you can specify a (properly merged) branch to push.
+
+  After that, the `push` command just checks that the branch contains the
+  upstream HEAD and then pushes it upstream.
+
+  The `--force` option will do a force push. Force pushes are typically
+  discouraged. Only use this option if you fully understand it. (The `--force`
+  option will NOT check for a proper merge. ANY branch will be force pushed!)
+
+  The `push` command accepts the `--all`, `--branch=`, `--dry-run`, `--force`,
+  `--merge`, `--rebase`, `--remote=`, `--squash` and `--update` options.
+
+- `git subrepo fetch <subdir>|--all [-r <remote>] [-b <branch>]`
+
+  Fetch the remote/upstream content for a subrepo.
+
+  It will create a Git reference called `subrepo/<subdir>/fetch` that points at
+  the same commit as `FETCH_HEAD`. It will also create a remote called
+  `subrepo/<subdir>`. These are temporary and you can easily remove them with
+  the subrepo `clean` command.
+
+  The `fetch` command accepts the `--all`, `--branch=` and `--remote=` options.
+
+- `git subrepo branch <subdir>|--all [-f] [-F]`
+
+  Create a branch with local subrepo commits.
+
+  Scan the history of the mainline for all the commits that affect the `subdir`
+  and create a new branch from them called `subrepo/<subdir>`.
+
+  This is useful for doing `pull` and `push` commands by hand.
+
+  Use the `--force` option to write over an existing `subrepo/<subdir>` branch.
+
+  The `branch` command accepts the `--all`, `--fetch` and `--force` options.
+
+- `git subrepo commit <subdir> [<subrepo-ref>] [-m <msg>] [-e] [-f] [-F]`
+
+  Add subrepo branch to current history as a single commit.
+
+  This command is generally used after a hand-merge. You have done a `subrepo
+  branch` and merged (rebased) it with the upstream. This command takes the
+  HEAD of that branch, puts its content into the subrepo subdir and adds a new
+  commit for it to the top of your mainline history.
+
+  This command requires that the upstream HEAD be in the `subrepo/<subdir>`
+  branch history. That way the same branch can push upstream. Use the
+  `--force` option to commit anyway.
+
+  The `commit` command accepts the `--edit`, `--fetch`, `--force` and
+  `--message=` options.
+
+- `git subrepo status [<subdir>|--all|--ALL] [-F] [-q|-v]`
+
+  Get the status of a subrepo. Uses the `--all` option by default. If the
+  `--quiet` flag is used, just print the subrepo names, one per line.
+
+  The `--verbose` option will show all the recent local and upstream commits.
+
+  Use `--ALL` to show the subrepos of the subrepos (ie the "subsubrepos"), if
+  any.
+
+  The `status` command accepts the `--all`, `--ALL`, `--fetch`, `--quiet` and
+  `--verbose` options.
+
+- `git subrepo clean <subdir>|--all|--ALL [-f]`
+
+  Remove artifacts created by `fetch` and `branch` commands.
+
+  The `fetch` and `branch` operations (and other commands that call them)
+  create temporary things like refs, branches and remotes. This command
+  removes all those things.
+
+  Use `--force` to remove refs. Refs are not removed by default because they
+  are sometimes needed between commands.
+
+  Use `--all` to clean up after all the current subrepos. Sometimes you might
+  change to a branch where a subrepo doesn't exist, and then `--all` won't find
+  it. Use `--ALL` to remove any artifacts that were ever created by subrepo.
+
+  To remove ALL subrepo artifacts:
+
+    git subrepo clean --ALL --force
+
+  The `clean` command accepts the `--all`, `--ALL`, and `--force` options.
+
+- `git subrepo config <subdir> <option> [<value>] [-f]`
+
+  Read or update configuration values in the subdir/.gitrepo file.
+
+  Because most of the values stored in the .gitrepo file are generated you
+  will need to use `--force` if you want to change anything else then the
+  `method` option.
+
+  Example to update the `method` option for a subrepo:
+
+    git subrepo config foo method rebase
+
+- `git subrepo help [<command>|--all]`
+
+  Same as `git help subrepo`. Will launch the manpage. For the shorter usage,
+  use `git subrepo -h`.
+
+  Use `git subrepo help <command>` to get help for a specific command. Use
+  `--all` to get a summary of all commands.
+
+  The `help` command accepts the `--all` option.
+
+- `git subrepo version [-q|-v]`
+
+  This command will display version information about git-subrepo and its
+  environment. For just the version number, use `git subrepo --version`. Use
+  `--verbose` for more version info, and `--quiet` for less.
+
+  The `version` command accepts the `--quiet` and `--verbose` options.
+
+- `git subrepo upgrade`
+
+  Upgrade the `git-subrepo` software itself. This simply does a `git pull` on
+  the git repository that the code is running from. It only works if you are on
+  the `master` branch. It won't work if you installed `git-subrepo` using `make
+  install`; in that case you'll need to `make install` from the latest code.
+
+= Command Options
+
+- `-h`
+
+  Show a brief view of the commands and options.
+
+- `--help`
+
+  Gives an overview of the help options available for the subrepo command.
+
+- `--version`
+
+  Print the git-subrepo version. Just the version number. Try the `version`
+  command for more version info.
+
+- `--all` (`-a`)
+
+  If you have multiple subrepos, issue the command to all of them (if
+  applicable).
+
+- `--ALL` (`-A`)
+
+  If you have subrepos that also have subrepos themselves, issue the command to
+  ALL of them. Note that the `--ALL` option only works for a subset of the
+  commands that `--all` works for.
+
+- `--branch=<branch-name>` (`-b <branch-name>`)
+
+  Use a different upstream branch-name than the remote HEAD or the one saved in
+  `.gitrepo` locally.
+
+- `--dry-run` (`-N`)
+
+  For the push command, do everything up until the push and then print out the
+  actual `git push` command needed to finish the operation.
+
+- `--edit` (`-e`)
+
+  Edit the commit message before committing.
+
+- `--fetch` (`-F`)
+
+  Use this option to fetch the upstream commits, before running the command.
+
+- `--force` (`-f`)
+
+  Use this option to force certain commands that fail in the general case.
+
+  NOTE: The `--force` option means different things for different commands.
+  Read the command specific doc for the exact meaning.
+
+- `--merge` (`-M`)
+
+  Use a `merge` strategy to include upstream subrepo commits on a pull (or
+  setup for push).
+
+- `--message=<message>` (`-m <message>`)
+
+  Specify your own commit message on the command line.
+
+- `--rebase` (`-R`)
+
+  Use a `rebase` strategy to include upstream subrepo commits on a pull (or
+  setup for push).
+
+- `--remote=<remote-url>` (`-r <remote-url>`)
+
+  Use a different remote-url than the one saved in `.gitrepo` locally.
+
+- `--squash` (`-s`)
+
+  Squash all commits on a push into one new commit.
+
+- `--update` (`-u`)
+
+  If `--branch` or `--remote` are used, and the command updates the `.gitrepo`
+  file, include these values to the update.
+
+= Output Options
+
+- `--quiet` (`-q`)
+
+  Print as little info as possible. Applicable to most commands.
+
+- `--verbose` (`-v`)
+
+  Print more information about the command execution and results. Applicable
+  to most commands.
+
+- `--debug` (`-d`)
+
+  Show the actual git (and other) commands being executed under the hood.
+  Applicable to most commands.
+
+- `--DEBUG` (`-x`)
+
+  Use the Bash `set -x` option which prints every command before it is run.
+  VERY noisy, but extremely useful in deep debugging. Applicable to all
+  commands.
+
+= Environment Variables
+
+The `git-subrepo` command exports and honors some environment variables:
+
+- `GIT_SUBREPO_ROOT`
+
+  This is set by the `.rc` file, if you use that method to install / enable
+  `git-subrepo`. It contains the path of the `git-subrepo` repository.
+
+- `GIT_SUBREPO_RUNNING`
+
+  This variable is exported when `git-subrepo` is running. It is set to the pid
+  of the `git-subrepo` process that is running. Other processes, like git hooks
+  for instance, can use this information to adjust accordingly.
+
+- `GIT_SUBREPO_COMMAND`
+
+  This variable is exported when `git-subrepo` is running. It is set to the
+  name of the `git-subrepo` subcommand that is running.
+
+- `GIT_SUBREPO_PAGER`
+
+  Use this to specify the pager to use for long output commands. Defaults to
+  `$PAGER` or `less`.
+
+- `GIT_SUBREPO_QUIET`
+
+  Set this for quiet (`-q`) output.
+
+- `GIT_SUBREPO_VERBOSE`
+
+  Set this for verbose (`-v`) output.
+
+- `GIT_SUBREPO_DEBUG`
+
+  Set this for debugging (`-d`) output.
+
+= Installation Instructions
+
+There are currently 3 ways to install `git-subrepo`. For all of them you need
+to get the source code from GitHub:
+
+  git clone https://github.com/ingydotnet/git-subrepo /path/to/git-subrepo
+
+The first installation method is preferred: `source` the `.rc` file. Just add a
+line like this one to your shell startup script:
+
+  source /path/to/git-subrepo/.rc
+
+That will modify your `PATH` and `MANPATH`, and also enable command completion.
+
+The second method is to do these things by hand. This might afford you more
+control of your shell environment. Simply add the `lib` and `man` directories
+to your `PATH` and `MANPATH`:
+
+  export GIT_SUBREPO_ROOT="/path/to/git-subrepo"
+  export PATH="/path/to/git-subrepo/lib:$PATH"
+  export MANPATH="/path/to/git-subrepo/man:$MANPATH"
+
+See below for info on how to turn on Command Completion.
+
+The third method is a standard system install, which puts `git-subrepo` next to
+your other git commands:
+
+  make install        # Possibly with 'sudo'
+
+This method does not account for upgrading and command completion yet.
+
+== Windows
+
+This command is known to work in these Windows environments:
+
+* Git for Windows -- https://git-for-windows.github.io/
+* Babun -- http://babun.github.io/
+* Cygwin -- https://www.cygwin.com/
+
+Let us know if there are others that it works (or doesn't work) in.
+
+= Testing
+
+The `git-subrepo` repository comes with a extensive test suite. You can run it
+with:
+
+  make test
+
+or if you don't have `make` on your system:
+
+  prove -v test
+
+= Upgrading
+
+If you used the `.rc` or `PATH` method of installation, just run this to
+upgrade `git-subrepo`:
+
+  git subrepo upgrade
+
+Or (same thing):
+
+  cd /path/to/git-subrepo
+  git pull
+
+If you used `make install` method, then run this again (after `git pull`):
+
+  make install        # Possibly with 'sudo'
+
+= Command Completion
+
+The `git subrepo` command supports `<TAB>`-based command completion. If you
+don't use the `.rc` script (see Installation, above), you'll need to enable
+this manually to use it.
+
+== In Bash
+
+If your Bash setup does not already provide command completion for Git, you'll
+need to enable that first:
+
+  source <Git completion script>
+
+On your system, the Git completion script might be found at any of the
+following locations (or somewhere else that we don't know about):
+
+* `/etc/bash_completion.d/git`
+* `/usr/share/bash-completion/git`
+* `/usr/share/bash-completion/completions/git`
+* `/opt/local/share/bash-completion/completions/git`
+* `/usr/local/etc/bash_completion.d/git`
+* `~/.homebrew/etc/bash_completion.d/git`
+
+In case you can't find any of these, this repository contains a copy of the
+Git completion script:
+
+  source /path/to/git-subrepo/share/git-completion.bash
+
+Once Git completion is enabled (whether you needed to do that manually or
+not), you can turn on `git-subrepo` completion with a command like this:
+
+  source /path/to/git-subrepo/share/completion.bash
+
+== In zsh
+
+In the Z shell (zsh), you can manually enable `git-subrepo` completion by
+adding the following line to your `~/.zshrc`, *before* the `compinit` function
+is called:
+
+  fpath=('/path/to/git-subrepo/share/zsh-completion' $fpath)
+
+= Status
+
+The git-subrepo command has been in use for well over a year and seems to get
+the job done. Development is still ongoing but mostly just for fixing bugs.
+
+Trying subrepo out is simple and painless (this is not `git submodule`).
+Nothing is permanent (if you do not push to shared remotes). ie You can always
+play around and reset back to the beginning without pain.
+
+This command has a test suite (run `make test`), but surely has many bugs. If
+you have expertise with Git and subcommands, please review the code, and file
+issues on anything that seems wrong.
+
+If you want to chat about the `git-subrepo` command, join `#gitcommands` on
+`irc.freenode.net`.
+
+= Notes
+
+* Works on POSIX systems: Linux, BSD, OSX, etc.
+* Works on various Windows environments. See "Windows" section above.
+* The `git-subrepo` repo itself has 2 subrepos under the `ext/` subdirectory.
+* Written in (very modern) Bash, with full test suite. Take a look.
+* A `.gitrepo` file never is in the top level dir (next to a `.git/` dir).
+
+= Authors
+
+* Ingy döt Net <ingy@ingy.net>
+* Magnus Carlsson <grimmymail@gmail.com>
+
+= License and Copyright
+
+The MIT License (MIT)
+
+Copyright (c) 2013-2020 Ingy döt Net