avm-tools 0.108.0 → 0.111.0

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/lib/test/tap.bash

@@ -1,153 +0,0 @@
-# test/tap.bash - TAP Testing Foundation for Bash
-#
-# Copyright (c) 2013-2016. Ingy döt Net.
-
-#------------------------------------------------------------------------------
-Test::Tap:die() { echo "$@" >&2; trap EXIT; exit 1; }
-#------------------------------------------------------------------------------
-
-Test__Tap_VERSION=0.0.4
-
-Test::Tap:init() {
-  [ -n "$BASH_SOURCE" ] ||
-    Test::Tap:die "Error: test-tap-bash must be run under Bash only"
-  Test__Tap_plan=0
-  Test__Tap_run=0
-  Test__Tap_failed=0
-  Test__Tap_pid=$BASHPID
-
-  if [ $# -gt 0 ]; then
-    [[ $# -eq 2 ]] ||
-      Test::Tap:die 'Usage: test/tap.bash tests <number>'
-    Test::Tap:plan "$@"
-  fi
-
-  trap Test::Tap:END EXIT
-}
-
-Test::Tap:plan() {
-  Test::Tap:_check-pid
-  [ $# -eq 2 ] ||
-    Test::Tap:die 'Usage: plan tests <number>'
-  if [ "$1" = tests ]; then
-    [[ "$2" =~ ^-?[0-9]+$ ]] ||
-      Test::Tap:die 'Plan must be a number'
-    [[ $2 -gt 0 ]] ||
-      Test::Tap:die 'Plan must greater then 0'
-    Test__Tap_plan=$2
-    printf "1..%d\n" $Test__Tap_plan
-  elif [ "$1" == skip_all ]; then
-    printf "1..0 # SKIP $2\n"
-    exit 0
-  else
-    Test::Tap:die 'Usage: plan tests <number>'
-  fi
-}
-
-Test::Tap:pass() {
-  Test::Tap:_check-pid
-  let Test__Tap_run=Test__Tap_run+1
-  local label="$1"
-  if [ -n "$label" ]; then
-    echo "ok $Test__Tap_run - $label"
-  else
-    echo "ok $Test__Tap_run"
-  fi
-}
-
-Test__Tap_CALL_STACK_LEVEL=1
-Test::Tap:fail() {
-  Test::Tap:_check-pid
-  let Test__Tap_run=Test__Tap_run+1
-  local c=( $(caller $Test__Tap_CALL_STACK_LEVEL) )
-  local file=${c[2]}
-  local line=${c[0]}
-  local label="$1" callback="$2"
-  if [ -n "$label" ]; then
-    echo "not ok $Test__Tap_run - $label"
-  else
-    echo "not ok $Test__Tap_run"
-  fi
-  label=${label:+"'$label'\n#   at $file line $line."}
-  label=${label:-"at $file line $line."}
-  echo -e "#   Failed test $label" >&2
-
-  [ -n "$callback" ] && $callback
-
-  local rc=${TEST_TAP_BAIL_ON_FAIL:-0}
-  [[ $TEST_TAP_BAIL_ON_FAIL -eq 0 ]] || exit $rc
-}
-
-Test::Tap:done_testing() {
-  Test::Tap:_check-pid
-  Test__Tap_plan=$Test__Tap_run
-  echo 1..${1:-$Test__Tap_run}
-}
-
-Test::Tap:diag() {
-  Test::Tap:_check-pid
-  local msg="$@"
-  msg="# ${msg//$'\n'/$'\n'# }"
-  echo "$msg" >&2
-}
-
-Test::Tap:note() {
-  Test::Tap:_check-pid
-  local msg="$@"
-  msg="# ${msg//$'\n'/$'\n'# }"
-  echo "$msg"
-}
-
-Test::Tap:BAIL_OUT() {
-  Test::Tap:_check-pid
-  Test__Tap_bail_msg="$@"
-  : "${Test__Tap_bail_msg:=No reason given.}"
-  exit 255
-}
-
-Test::Tap:BAIL_ON_FAIL() {
-  Test::Tap:_check-pid
-  TEST_TAP_BAIL_ON_FAIL=1
-}
-
-Test::Tap:END() {
-  local rc=$?
-  Test::Tap:_check-pid
-  if [ $rc -ne 0 ]; then
-    if [ -n "$Test__Tap_bail_msg" -o -n "$TEST_TAP_BAIL_ON_FAIL" ]; then
-      local bail="${Test__Tap_bail_msg:-"Bailing out on status=$rc"}"
-      echo "Bail out!  $bail"
-      exit $rc
-    fi
-  fi
-
-  for v in plan run failed; do eval local $v=\$Test__Tap_$v; done
-  if [ $plan -eq 0 ]; then
-    if [ $run -gt 0 ]; then
-      echo "# Tests were run but no plan was declared." >&2
-    fi
-  else
-    if [ $run -eq 0 ]; then
-      echo "# No tests run!" >&2
-    elif [ $run -ne $plan ]; then
-      local msg="# Looks like you planned $plan tests but ran $run."
-      [ $plan -eq 1 ] && msg=${msg/tests/test}
-      echo "$msg" >&2
-    fi
-  fi
-  local exit_code=0
-  if [ $Test__Tap_failed -gt 0 ]; then
-    exit_code=$Test__Tap_failed
-    [ $exit_code -gt 254 ] && exit_code=254
-    local msg="# Looks like you failed $failed tests of $run run."
-    [ $Test__Tap_failed -eq 1 ] && msg=${msg/tests/test}
-    echo "$msg" >&2
-  fi
-  exit $exit_code
-}
-
-Test::Tap:_check-pid() {
-  if [ ${BASHPID:-0} -ne ${Test__Tap_pid:-0} ]; then
-    die "Error: Called Test::Tap method from a subprocess" 3
-  fi
-}

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/man/man3/test-tap.3

@@ -1,119 +0,0 @@
-.\" Automatically generated by Pod::Man 2.27 (Pod::Simple 3.28)
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings.  \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
-.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
-.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
-.\" nothing in troff, for use with C<>.
-.tr \(*W-
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-.    ds -- \(*W-
-.    ds PI pi
-.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
-.    ds L" ""
-.    ds R" ""
-.    ds C` ""
-.    ds C' ""
-'br\}
-.el\{\
-.    ds -- \|\(em\|
-.    ds PI \(*p
-.    ds L" ``
-.    ds R" ''
-.    ds C`
-.    ds C'
-'br\}
-.\"
-.\" Escape single quotes in literal strings from groff's Unicode transform.
-.ie \n(.g .ds Aq \(aq
-.el       .ds Aq '
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
-.\" entries marked with X<> in POD.  Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.\"
-.\" Avoid warning from groff about undefined register 'F'.
-.de IX
-..
-.nr rF 0
-.if \n(.g .if rF .nr rF 1
-.if (\n(rF:(\n(.g==0)) \{
-.    if \nF \{
-.        de IX
-.        tm Index:\\$1\t\\n%\t"\\$2"
-..
-.        if !\nF==2 \{
-.            nr % 0
-.            nr F 2
-.        \}
-.    \}
-.\}
-.rr rF
-.\" ========================================================================
-.\"
-.IX Title "Test::Tap 1"
-.TH Test::Tap 1 "January 2016" "Generated by Swim v0.1.41" "\s-1TAP\s0 Test Base for Bash"
-.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.if n .ad l
-.nh
-.SH "Name"
-.IX Header "Name"
-Test::Tap \- \s-1TAP\s0 Test Base for Bash
-.SH "Synopsis"
-.IX Header "Synopsis"
-.Vb 1
-\&    source test/tap.bash
-\&
-\&    Test::Tap:plan tests 1
-\&
-\&    pass \*(AqEverything is OK!\*(Aq
-.Ve
-.SH "Description"
-.IX Header "Description"
-This is a \s-1TAP\s0 testing base class for Bash. It has all the basic \s-1TAP\s0 functions, and works properly from a \s-1TAP\s0 harness, like the \f(CW\*(C`prove\*(C'\fR utility.
-.PP
-test-tap-bash is used as the base for test-more-bash, which is what you want if you are writing tests in bash.
-.PP
-See: <https://github.com/ingydotnet/test\-more\-bash/>
-.SH "Functions"
-.IX Header "Functions"
-.ie n .IP """Test::Tap:init""" 4
-.el .IP "\f(CWTest::Tap:init\fR" 4
-.IX Item "Test::Tap:init"
-Must be called first for every test file/process.
-.ie n .IP """Test::Tap::plan""" 4
-.el .IP "\f(CWTest::Tap::plan\fR" 4
-.IX Item "Test::Tap::plan"
-Used to set the plan.
-.SH "TODO"
-.IX Header "TODO"
-.IP "\(bu" 4
-Finish this doc.
-.SH "Author"
-.IX Header "Author"
-Written by Ingy döt Net <ingy@ingy.net>
-.SH "Copyright & License"
-.IX Header "Copyright & License"
-Copyright 2013\-2016. Ingy döt Net.
-.PP
-The \s-1MIT\s0 License (\s-1MIT\s0).

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/bail_out.t

@@ -1,13 +0,0 @@
-#!/usr/bin/env bash
-
-source test/helper.bash
-source lib/test/tap.bash
-
-Test::Tap:init tests 1
-
-output=$(prove -v test/test/{b,f}ail.t 2>&1)
-
-test-helper:like \
-  "$output" \
-  'Bailout called.  Further testing stopped:  Get me outta here' \
-  'Test::Tap:BAIL_OUT works'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/done.t

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init
-
-Test::Tap:pass one
-Test::Tap:pass two
-
-Test::Tap:done_testing

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/fail.t

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-source test/helper.bash
-source lib/test/tap.bash
-
-Test::Tap:init tests 2
-
-output="$(prove -v test/test/fail.t 2>&1)"
-
-# echo "# >>>${output//$'\n'/$'\n'# }<<<" >&2
-
-test-helper:like \
-  "$output" \
-  'not ok 1 - I am a failure' \
-  'Test::Tap:fail works'
-
-test-helper:like \
-  "$output" \
-  'Failed 1/1 subtests' \
-  'Proper summary'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/fail_fast.t

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-source test/helper.bash
-source lib/test/tap.bash
-
-Test::Tap:init tests 1
-
-output="$(prove -v test/test/fail_fast.t 2>&1)"
-
-# echo ">>>$output<<<" >&2
-
-test-helper:like \
-  "$output" \
-  'Further testing stopped:  Bailing out on status=1' \
-  'Test::Tap:BAIL_OUT works'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/helper.bash

@@ -1,9 +0,0 @@
-test-helper:like() {
-  local got=$1 regex=$2 label=$3
-  if [[ "$got" =~ "$regex" ]]; then
-    Test::Tap:pass "$label"
-  else
-    Test::Tap:fail "$label"
-    Test::Tap:diag "Got: '$got'"
-  fi
-}

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/pass.t

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init tests 3
-
-Test::Tap:pass 'pass 1 - with label'
-Test::Tap:pass
-Test::Tap:pass 'pass 3 - 2 has no label'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/plan.t

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init
-Test::Tap:plan tests 3
-
-for n in 1 2 3; do
-  Test::Tap:pass "Test #$n"
-done

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/skip_all.t

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-source test/helper.bash
-source lib/test/tap.bash
-
-Test::Tap:init tests 4
-
-for s in plan init; do
-  output=$(prove test/test/skip-all-$s.t)
-
-  test-helper:like \
-    "$output" \
-    "skipped: Test for skip_all from $s" \
-    "skip_all from $s: it works"
-
-  test-helper:like \
-    "$output" \
-    'Result: NOTESTS' \
-    "skip_all from $s: No tests run"
-done

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/tap.t

@@ -1,13 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init tests 4
-
-Test::Tap:pass 'pass with label'
-Test::Tap:pass
-Test::Tap:pass 'previous test has no label'
-msg="$(Test::Tap:fail 'faaaaailll' 2>/dev/null)"
-if [[ "$msg" =~ not\ ok\ 4\ -\ faaaaailll ]]; then
-  Test::Tap:pass 'fail works'
-fi

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/test/bail.t

@@ -1,14 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init tests 5
-
-Test::Tap:pass 'test #1'
-Test::Tap:pass 'test #2'
-Test::Tap:pass 'test #3'
-
-Test::Tap:BAIL_OUT 'Get me outta here'
-
-Test::Tap:pass 'test #4'
-Test::Tap:fail 'test #5'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/test/fail.t

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init tests 1
-
-Test::Tap:fail 'I am a failure'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/test/fail_fast.t

@@ -1,12 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init tests 5
-Test::Tap:BAIL_ON_FAIL
-
-Test::Tap:pass 'test #1'
-Test::Tap:pass 'test #2'
-Test::Tap:fail 'test #3'
-Test::Tap:pass 'test #4'
-Test::Tap:pass 'test #5'

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/test/skip-all-init.t

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init skip_all 'Test for skip_all from init'
-
-Test::Tap:diag "This code should not be run"
-Test::Tap:fail

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/ext/test-tap-bash/test/test/skip-all-plan.t

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-
-source lib/test/tap.bash
-
-Test::Tap:init
-Test::Tap:plan skip_all 'Test for skip_all from plan'
-
-Test::Tap:diag "This code should not be run"
-Test::Tap:fail

data/vendor/eac_git/vendor/git-subrepo/ext/test-more-bash/lib/test/more.bash

@@ -1,95 +0,0 @@
-# test/more.bash - Complete TAP test framework for Bash
-#
-# Copyright (c) 2013-2016. Ingy döt Net.
-
-set -e
-
-Test__More_VERSION=0.0.3
-
-source bash+ :std
-use Test::Tap
-
-Test::More:import() { Test::Tap:init "$@"; }
-
-plan() { Test::Tap:plan "$@"; }
-pass() { Test::Tap:pass "$@"; }
-fail() { Test::Tap:fail "$@"; }
-diag() { Test::Tap:diag "$@"; }
-note() { Test::Tap:note "$@"; }
-done_testing() { Test::Tap:done_testing "$@"; }
-BAIL_OUT() { Test::Tap:BAIL_OUT "$@"; }
-BAIL_ON_FAIL() { Test::Tap:BAIL_ON_FAIL "$@"; }
-
-is() {
-  local got="$1" want="$2" label="$3"
-  if [[ $got == "$want" ]]; then
-    Test::Tap:pass "$label"
-  else
-    Test::Tap:fail "$label" Test::More:is-fail
-  fi
-}
-
-Test::More:is-fail() {
-  local Test__Tap_CALL_STACK_LEVEL=
-  Test__Tap_CALL_STACK_LEVEL=$(( Test__Tap_CALL_STACK_LEVEL + 1 ))
-  if [[ "$want" =~ \n ]]; then
-    echo "$got" > /tmp/got-$$
-    echo "$want" > /tmp/want-$$
-    diff -u /tmp/{want,got}-$$ >&2
-    wc /tmp/{want,got}-$$ >&2
-    rm -f /tmp/{got,want}-$$
-  else
-    Test::Tap:diag "\
-    got: '$got'
-  expected: '$want'"
-  fi
-}
-
-isnt() {
-  local Test__Tap_CALL_STACK_LEVEL=
-  Test__Tap_CALL_STACK_LEVEL=$(( Test__Tap_CALL_STACK_LEVEL + 1 ))
-  local got="$1" dontwant="$2" label="$3"
-  if [[ $got != "$dontwant" ]]; then
-    Test::Tap:pass "$label"
-  else
-    Test::Tap:fail "$label" Test::More:isnt-fail
-  fi
-}
-
-Test::More:isnt-fail() {
-    Test::Tap:diag "\
-      got: '$got'
-   expected: anything else"
-}
-
-ok() {
-  (exit ${1:-$?}) &&
-    Test::Tap:pass "$2" ||
-    Test::Tap:fail "$2"
-}
-
-like() {
-  local got=$1 regex=$2 label=$3
-  if [[ $got =~ "$regex" ]]; then
-    Test::Tap:pass "$label"
-  else
-    Test::Tap:fail "$label" Test::More:like-fail
-  fi
-}
-
-Test::More:like-fail() {
-    Test::Tap:diag "Got: '$got'"
-}
-
-unlike() {
-  local got=$1 regex=$2 label=$3
-  if [[ ! $got =~ "$regex" ]]; then
-    Test::Tap:pass "$label"
-  else
-    Test::Tap:fail "$label" Test::More:unlike-fail
-  fi
-}
-
-Test::More:unlike-fail() {
-    Test::Tap:diag "Got: '$got'"
-}