avm-tools 0.104.0 → 0.105.0

data/vendor/eac_ruby_base0/eac_ruby_base0.gemspec

@@ -12,9 +12,9 @@ Gem::Specification.new do |s|
 
   s.files = Dir['{lib}/**/*']
 
-  s.add_dependency 'eac_cli', '~> 0.20'
-  s.add_dependency 'eac_ruby_gems_utils', '~> 0.8'
-  s.add_dependency 'eac_ruby_utils', '~> 0.67'
+  s.add_dependency 'eac_cli', '~> 0.22', '>= 0.22.2'
+  s.add_dependency 'eac_ruby_gems_utils', '~> 0.9', '~> 0.9.5'
+  s.add_dependency 'eac_ruby_utils', '~> 0.70'
 
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3'
 end

data/vendor/eac_ruby_base0/lib/eac_ruby_base0/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module EacRubyBase0
-  VERSION = '0.10.0'
+  VERSION = '0.10.1'
 end

data/vendor/eac_ruby_base0/spec/rubocop_spec.rb

@@ -1,3 +1,3 @@
 # frozen_string_literal: true
 
-::EacRubyGemSupport::Rspec.default.describe_rubocop
+::EacRubyUtils::Rspec.default_setup.describe_rubocop

data/vendor/eac_ruby_base0/spec/spec_helper.rb

@@ -1,103 +1,4 @@
 # frozen_string_literal: true
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
-
-  require 'eac_ruby_gem_support/rspec'
-  ::EacRubyGemSupport::Rspec.setup(::File.expand_path('..', __dir__), config)
-end
+require 'eac_ruby_utils/rspec/default_setup'
+::EacRubyUtils::Rspec.default_setup_create(::File.expand_path('..', __dir__))

data/vendor/eac_ruby_gems_utils/eac_ruby_gems_utils.gemspec

@@ -23,8 +23,8 @@ Gem::Specification.new do |s|
   s.test_files = Dir['{spec}/**/*', '.rspec']
 
   s.add_dependency 'bundler', '~> 2.2', '>= 2.2.17'
-  s.add_dependency 'eac_ruby_utils', '~> 0.67'
+  s.add_dependency 'eac_ruby_utils', '~> 0.70'
 
   # Tests
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3'
 end

data/vendor/eac_ruby_gems_utils/lib/eac_ruby_gems_utils/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module EacRubyGemsUtils
-  VERSION = '0.9.4'
+  VERSION = '0.9.5'
 end

data/vendor/eac_ruby_gems_utils/spec/code/rubocop_check_spec.rb

@@ -1,3 +1,3 @@
 # frozen_string_literal: true
 
-::EacRubyGemSupport::Rspec.default.describe_rubocop
+::EacRubyUtils::Rspec.default_setup.describe_rubocop

data/vendor/eac_ruby_gems_utils/spec/spec_helper.rb

@@ -1,103 +1,4 @@
 # frozen_string_literal: true
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
-
-  require 'eac_ruby_gem_support/rspec'
-  ::EacRubyGemSupport::Rspec.setup(::File.expand_path('..', __dir__), config)
-end
+require 'eac_ruby_utils/rspec/default_setup'
+::EacRubyUtils::Rspec.default_setup_create(::File.expand_path('..', __dir__))

data/vendor/eac_ruby_utils/eac_ruby_utils.gemspec

@@ -19,5 +19,5 @@ Gem::Specification.new do |s|
   s.add_dependency 'addressable', '~> 2.6'
   s.add_dependency 'filesize'
   s.add_dependency 'net-ssh', '~> 4.2'
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3', '>= 0.3.2'
 end

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/envs/executable.rb

@@ -22,7 +22,7 @@ module EacRubyUtils
       def validate
         return nil if exist?
 
-        "Program \"#{name}\" not found in environment #{env}"
+        "Program \"#{::Shellwords.join(executable_args)}\" not found in environment #{env}"
       end
 
       def validate!
@@ -33,13 +33,25 @@ module EacRubyUtils
 
       def command(*command_args)
         validate!
-        env.command(name, *command_args)
+        env.command(*executable_args, *command_args)
+      end
+
+      def executable_args
+        executable_args_from_envvar || [name]
+      end
+
+      def executable_args_envvar
+        "#{name}_command".variableize.upcase
+      end
+
+      def executable_args_from_envvar
+        ENV[executable_args_envvar].if_present { |v| ::Shellwords.split(v) }
       end
 
       private
 
       def exist_uncached
-        env.command(name, *check_args).execute!
+        env.command(*executable_args, *check_args).execute!
         true
       rescue Errno::ENOENT
         false

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/gems_registry/gem.rb

@@ -0,0 +1,75 @@
+# frozen_string_literal: true
+
+require 'active_support/core_ext/string/inflections'
+require 'eac_ruby_utils/recursive_builder'
+require 'eac_ruby_utils/simple_cache'
+
+module EacRubyUtils
+  class GemsRegistry
+    class Gem
+      include ::Comparable
+      include ::EacRubyUtils::SimpleCache
+
+      attr_reader :registry, :gemspec
+
+      def initialize(registry, gemspec)
+        @registry = registry
+        @gemspec = gemspec
+      end
+
+      def depend_on(gem)
+        dependencies.lazy.map(&:name).include?(gem.gemspec.name)
+      end
+
+      def dependencies
+        @dependencies ||= dependencies_uncached # dependencies_uncached
+      end
+
+      def <=>(other)
+        sd = depend_on(other)
+        od = other.depend_on(self)
+        return 1 if sd && !od
+        return -1 if od && !sd
+
+        gemspec.name <=> other.gemspec.name
+      end
+
+      def found?
+        lib_file_found? && registered_module.is_a?(::Module)
+      end
+
+      def lib_file_found?
+        gemspec.require_paths.any? do |require_path|
+          ::Pathname.new(require_path).expand_path(gemspec.gem_dir).join(path_to_require + '.rb')
+                    .file?
+        end
+      end
+
+      def registered_module
+        return nil unless lib_file_found?
+
+        require path_to_require
+        path_to_require.classify.constantize
+      end
+
+      # @return [String]
+      def path_to_require
+        gemspec.name.gsub('-', '/') + '/' + registry.module_suffix.underscore
+      end
+
+      private
+
+      def dependencies_uncached
+        ::EacRubyUtils::RecursiveBuilder
+          .new(gemspec) { |item| gem_item_dependencies(item) }
+          .result
+      end
+
+      def gem_item_dependencies(item)
+        ::Gem::Specification.find_by_name(item.name).dependencies
+      rescue ::Gem::MissingSpecError
+        []
+      end
+    end
+  end
+end

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/gems_registry.rb

@@ -0,0 +1,35 @@
+# frozen_string_literal: true
+
+require 'rubygems'
+require 'eac_ruby_utils/gems_registry/gem'
+
+module EacRubyUtils
+  # Search in each gem for a class determined by registry and run the method "register" on each
+  # found.
+  #
+  # Example:
+  # * The module suffix is `TheClass`;
+  # * A gem with name "my-lib" is being analyzed
+  # * If a require for "my/lib/the_class" is succesful the class/module `My::Lib::TheClass` will
+  #   be collected.
+  class GemsRegistry
+    attr_reader :module_suffix
+
+    def initialize(module_suffix)
+      @module_suffix = module_suffix
+    end
+
+    # @return [Array<EacRubyUtils::GemsRegistry::Gem>]
+    def registered
+      @registered ||= all_gems.select(&:found?)
+    end
+
+    private
+
+    # @return [Array<EacRubyUtils::GemsRegistry::Gem>]
+    def all_gems
+      ::Gem::Specification.map { |gemspec| ::EacRubyUtils::GemsRegistry::Gem.new(self, gemspec) }
+                          .sort
+    end
+  end
+end

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/recursive_builder.rb

@@ -0,0 +1,51 @@
+# frozen_string_literal: true
+
+require 'eac_ruby_utils/simple_cache'
+
+module EacRubyUtils
+  class RecursiveBuilder
+    include ::EacRubyUtils::SimpleCache
+
+    attr_reader :root, :neighbors_block
+
+    def initialize(root, &neighbors_block)
+      @root = root
+      @neighbors_block = neighbors_block
+    end
+
+    private
+
+    attr_reader :added, :to_check
+
+    def result_uncached
+      @added = []
+      @to_check = []
+      item_try_add_to_check(root)
+      while check_next_item
+        # Do nothing
+      end
+      added
+    end
+
+    def item_try_add_to_check(item)
+      to_check << item unless item_added?(item)
+    end
+
+    def item_added?(item)
+      added.include?(item) || to_check.include?(item)
+    end
+
+    def check_next_item
+      return false unless to_check.any?
+
+      item = to_check.shift
+      added << item
+      item_neighborhs(item).each { |sub_item| item_try_add_to_check(sub_item) }
+      true
+    end
+
+    def item_neighborhs(item)
+      neighbors_block.call(item)
+    end
+  end
+end