avm-tools 0.103.1 → 0.107.0

data/vendor/eac_git/lib/eac_git/rspec/setup.rb

@@ -0,0 +1,23 @@
+# frozen_string_literal: true
+
+require 'eac_git/executables'
+require 'eac_git/rspec/stubbed_git_local_repo'
+
+module EacGit
+  module Rspec
+    module Setup
+      def self.extended(setup_obj)
+        setup_obj.setup_conditional_git
+        setup_obj.setup_stubbed_git_local_repo
+      end
+
+      def setup_conditional_git
+        conditional(:git) { ::EacGit::Executables.git.validate }
+      end
+
+      def setup_stubbed_git_local_repo
+        rspec_config.include ::EacGit::Rspec::StubbedGitLocalRepo
+      end
+    end
+  end
+end

data/vendor/eac_git/lib/eac_git/rspec.rb

@@ -1,22 +1,9 @@
 # frozen_string_literal: true
 
-require 'eac_ruby_utils/rspec/conditional'
-require 'eac_git/executables'
+require 'eac_ruby_utils/core_ext'
 
 module EacGit
   module Rspec
     require_sub __FILE__
-
-    class << self
-      def configure
-        ::EacRubyUtils::Rspec::Conditional.default.add(:git) do
-          ::EacGit::Executables.git.validate
-        end
-        RSpec.configure do |config|
-          ::EacRubyUtils::Rspec::Conditional.default.configure(config)
-          config.include ::EacGit::Rspec::StubbedGitLocalRepo
-        end
-      end
-    end
   end
 end

data/vendor/eac_git/lib/eac_git/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module EacGit
-  VERSION = '0.6.0'
+  VERSION = '0.8.0'
 end

data/vendor/eac_git/spec/rubocop_spec.rb

@@ -1,3 +1,3 @@
 # frozen_string_literal: true
 
-::EacRubyGemSupport::Rspec.default.describe_rubocop
+::EacRubyUtils::Rspec.default_setup.describe_rubocop

data/vendor/eac_git/spec/spec_helper.rb

@@ -1,106 +1,4 @@
 # frozen_string_literal: true
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
-  require 'eac_ruby_gem_support/rspec'
-  ::EacRubyGemSupport::Rspec.setup(::File.expand_path('..', __dir__), config)
-end
-
-require 'eac_git/rspec'
-::EacGit::Rspec.configure
-require 'aranha/parsers/spec/source_target_fixtures_example'
+require 'eac_ruby_utils/rspec/default_setup'
+::EacRubyUtils::Rspec.default_setup_create(::File.expand_path('..', __dir__))

data/vendor/eac_ruby_base0/eac_ruby_base0.gemspec

@@ -12,9 +12,10 @@ Gem::Specification.new do |s|
 
   s.files = Dir['{lib}/**/*']
 
-  s.add_dependency 'eac_cli', '~> 0.20'
-  s.add_dependency 'eac_ruby_gems_utils', '~> 0.8'
-  s.add_dependency 'eac_ruby_utils', '~> 0.67'
+  s.add_dependency 'eac_cli', '~> 0.22', '>= 0.22.2'
+  s.add_dependency 'eac_fs', '~> 0.3'
+  s.add_dependency 'eac_ruby_gems_utils', '~> 0.9', '~> 0.9.6'
+  s.add_dependency 'eac_ruby_utils', '~> 0.70'
 
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3'
 end

data/vendor/eac_ruby_base0/lib/eac_ruby_base0/application.rb

@@ -3,10 +3,10 @@
 require 'eac_cli/config'
 require 'eac_config/envvars_node'
 require 'eac_config/yaml_file_node'
+require 'eac_fs/cache'
 require 'eac_ruby_base0/application_xdg'
 require 'eac_ruby_gems_utils/gem'
 require 'eac_ruby_utils/core_ext'
-require 'eac_ruby_utils/filesystem_cache'
 
 module EacRubyBase0
   class Application
@@ -44,8 +44,8 @@ module EacRubyBase0
     end
 
     def fs_cache
-      @fs_cache ||= ::EacRubyUtils::FilesystemCache.new(
-        cache_dir.join(::EacRubyUtils::FilesystemCache.name.parameterize)
+      @fs_cache ||= ::EacFs::Cache.new(
+        cache_dir.join(::EacFs::Cache.name.parameterize)
       )
     end
 

data/vendor/eac_ruby_base0/lib/eac_ruby_base0/core_ext.rb

@@ -1,4 +1,5 @@
 # frozen_string_literal: true
 
 require 'eac_cli/core_ext'
+require 'eac_fs/patches'
 require 'eac_ruby_base0/patches'

data/vendor/eac_ruby_base0/lib/eac_ruby_base0/runner.rb

@@ -3,6 +3,7 @@
 require 'eac_cli/core_ext'
 require 'eac_cli/speaker'
 require 'eac_config/node'
+require 'eac_fs/cache'
 require 'eac_ruby_utils/speaker'
 
 module EacRubyBase0
@@ -23,13 +24,11 @@ module EacRubyBase0
     end
 
     def run
-      ::EacRubyUtils::Speaker.context.on(build_speaker) do
-        ::EacConfig::Node.context.on(runner_context.call(:application).build_config) do
-          if parsed.version?
-            show_version
-          else
-            run_with_subcommand
-          end
+      on_context do
+        if parsed.version?
+          show_version
+        else
+          run_with_subcommand
         end
       end
     end
@@ -38,6 +37,16 @@ module EacRubyBase0
       runner_context.call(:application).version.to_s
     end
 
+    def on_context
+      ::EacRubyUtils::Speaker.context.on(build_speaker) do
+        ::EacConfig::Node.context.on(runner_context.call(:application).build_config) do
+          ::EacFs::Cache.context.on(application.fs_cache) do
+            yield
+          end
+        end
+      end
+    end
+
     def show_version
       out("#{application_version}\n")
     end

data/vendor/eac_ruby_base0/lib/eac_ruby_base0/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module EacRubyBase0
-  VERSION = '0.10.0'
+  VERSION = '0.11.0'
 end

data/vendor/eac_ruby_base0/spec/rubocop_spec.rb

@@ -1,3 +1,3 @@
 # frozen_string_literal: true
 
-::EacRubyGemSupport::Rspec.default.describe_rubocop
+::EacRubyUtils::Rspec.default_setup.describe_rubocop

data/vendor/eac_ruby_base0/spec/spec_helper.rb

@@ -1,103 +1,4 @@
 # frozen_string_literal: true
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
-
-  require 'eac_ruby_gem_support/rspec'
-  ::EacRubyGemSupport::Rspec.setup(::File.expand_path('..', __dir__), config)
-end
+require 'eac_ruby_utils/rspec/default_setup'
+::EacRubyUtils::Rspec.default_setup_create(::File.expand_path('..', __dir__))

data/vendor/eac_ruby_gems_utils/eac_ruby_gems_utils.gemspec

@@ -23,8 +23,8 @@ Gem::Specification.new do |s|
   s.test_files = Dir['{spec}/**/*', '.rspec']
 
   s.add_dependency 'bundler', '~> 2.2', '>= 2.2.17'
-  s.add_dependency 'eac_ruby_utils', '~> 0.67'
+  s.add_dependency 'eac_ruby_utils', '~> 0.70'
 
   # Tests
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3'
 end

data/vendor/eac_ruby_gems_utils/lib/eac_ruby_gems_utils/tests/base.rb

@@ -2,7 +2,6 @@
 
 require 'eac_ruby_utils/core_ext'
 require 'eac_ruby_utils/fs/logs'
-require 'eac_ruby_utils/fs_cache'
 require 'eac_ruby_utils/listable'
 require 'eac_ruby_utils/on_clean_ruby_environment'
 
@@ -54,10 +53,6 @@ module EacRubyGemsUtils
         logs[:stderr].write(r[:stderr])
         r[:exit_code].zero?
       end
-
-      def root_cache
-        ::EacRubyUtils.fs_cache.child(gem.root.to_s.parameterize, self.class.name.parameterize)
-      end
     end
   end
 end

data/vendor/eac_ruby_gems_utils/lib/eac_ruby_gems_utils/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module EacRubyGemsUtils
-  VERSION = '0.9.4'
+  VERSION = '0.9.6'
 end

data/vendor/eac_ruby_gems_utils/spec/code/rubocop_check_spec.rb

@@ -1,3 +1,3 @@
 # frozen_string_literal: true
 
-::EacRubyGemSupport::Rspec.default.describe_rubocop
+::EacRubyUtils::Rspec.default_setup.describe_rubocop

data/vendor/eac_ruby_gems_utils/spec/spec_helper.rb

@@ -1,103 +1,4 @@
 # frozen_string_literal: true
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
-
-  require 'eac_ruby_gem_support/rspec'
-  ::EacRubyGemSupport::Rspec.setup(::File.expand_path('..', __dir__), config)
-end
+require 'eac_ruby_utils/rspec/default_setup'
+::EacRubyUtils::Rspec.default_setup_create(::File.expand_path('..', __dir__))

data/vendor/eac_ruby_utils/eac_ruby_utils.gemspec

@@ -19,5 +19,5 @@ Gem::Specification.new do |s|
   s.add_dependency 'addressable', '~> 2.6'
   s.add_dependency 'filesize'
   s.add_dependency 'net-ssh', '~> 4.2'
-  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.2'
+  s.add_development_dependency 'eac_ruby_gem_support', '~> 0.3', '>= 0.3.2'
 end

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/compact.rb

@@ -0,0 +1,22 @@
+# frozen_string_literal: true
+
+module EacRubyUtils
+  class Compact
+    attr_reader :object, :attributes
+
+    def initialize(object, attributes)
+      @object = object
+      @attributes = attributes
+    end
+
+    # @return [Array]
+    def to_a
+      attributes.map { |attr| object.send(attr) }
+    end
+
+    # @return [Hash]
+    def to_h
+      attributes.map { |attr| [attr.to_sym, object.send(attr)] }.to_h
+    end
+  end
+end

data/vendor/eac_ruby_utils/lib/eac_ruby_utils/envs/executable.rb

@@ -22,7 +22,7 @@ module EacRubyUtils
       def validate
         return nil if exist?
 
-        "Program \"#{name}\" not found in environment #{env}"
+        "Program \"#{::Shellwords.join(executable_args)}\" not found in environment #{env}"
       end
 
       def validate!
@@ -33,13 +33,25 @@ module EacRubyUtils
 
       def command(*command_args)
         validate!
-        env.command(name, *command_args)
+        env.command(*executable_args, *command_args)
+      end
+
+      def executable_args
+        executable_args_from_envvar || [name]
+      end
+
+      def executable_args_envvar
+        "#{name}_command".variableize.upcase
+      end
+
+      def executable_args_from_envvar
+        ENV[executable_args_envvar].if_present { |v| ::Shellwords.split(v) }
       end
 
       private
 
       def exist_uncached
-        env.command(name, *check_args).execute!
+        env.command(*executable_args, *check_args).execute!
         true
       rescue Errno::ENOENT
         false