autocomplete_zipcode 0.1.2 → 2.1.1

data/example/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require_relative 'application'
-
-# Initialize the Rails application.
-Rails.application.initialize!

data/example/config/environments/development.rb

@@ -1,54 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports.
-  config.consider_all_requests_local = true
-
-  # Enable/disable caching. By default caching is disabled.
-  if Rails.root.join('tmp/caching-dev.txt').exist?
-    config.action_controller.perform_caching = true
-
-    config.cache_store = :memory_store
-    config.public_file_server.headers = {
-      'Cache-Control' => 'public, max-age=172800'
-    }
-  else
-    config.action_controller.perform_caching = false
-
-    config.cache_store = :null_store
-  end
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  config.action_mailer.perform_caching = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Suppress logger output for asset requests.
-  config.assets.quiet = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # Use an evented file watcher to asynchronously detect changes in source code,
-  # routes, locales, etc. This feature depends on the listen gem.
-  config.file_watcher = ActiveSupport::EventedFileUpdateChecker
-end

data/example/config/environments/production.rb

@@ -1,86 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Mount Action Cable outside main process or domain
-  # config.action_cable.mount_path = nil
-  # config.action_cable.url = 'wss://example.com/cable'
-  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  config.log_tags = [ :request_id ]
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Use a real queuing backend for Active Job (and separate queues per environment)
-  # config.active_job.queue_adapter     = :resque
-  # config.active_job.queue_name_prefix = "example_#{Rails.env}"
-  config.action_mailer.perform_caching = false
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new(STDOUT)
-    logger.formatter = config.log_formatter
-    config.logger = ActiveSupport::TaggedLogging.new(logger)
-  end
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/example/config/environments/test.rb

@@ -1,42 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure public file server for tests with Cache-Control for performance.
-  config.public_file_server.enabled = true
-  config.public_file_server.headers = {
-    'Cache-Control' => 'public, max-age=3600'
-  }
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-  config.action_mailer.perform_caching = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/example/config/initializers/application_controller_renderer.rb

@@ -1,6 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# ApplicationController.renderer.defaults.merge!(
-#   http_host: 'example.org',
-#   https: false
-# )

data/example/config/initializers/assets.rb

@@ -1,11 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Add additional assets to the asset load path
-# Rails.application.config.assets.paths << Emoji.images_path
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/example/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/example/config/initializers/cookies_serializer.rb

@@ -1,5 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Specify a serializer for the signed and encrypted cookie jars.
-# Valid options are :json, :marshal, and :hybrid.
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/example/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/example/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/example/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/example/config/initializers/new_framework_defaults.rb

@@ -1,24 +0,0 @@
-# Be sure to restart your server when you modify this file.
-#
-# This file contains migration options to ease your Rails 5.0 upgrade.
-#
-# Read the Guide for Upgrading Ruby on Rails for more info on each option.
-
-# Enable per-form CSRF tokens. Previous versions had false.
-Rails.application.config.action_controller.per_form_csrf_tokens = true
-
-# Enable origin-checking CSRF mitigation. Previous versions had false.
-Rails.application.config.action_controller.forgery_protection_origin_check = true
-
-# Make Ruby 2.4 preserve the timezone of the receiver when calling `to_time`.
-# Previous versions had false.
-ActiveSupport.to_time_preserves_timezone = true
-
-# Require `belongs_to` associations by default. Previous versions had false.
-Rails.application.config.active_record.belongs_to_required_by_default = true
-
-# Do not halt callback chains when a callback returns false. Previous versions had true.
-ActiveSupport.halt_callback_chains_on_return_false = false
-
-# Configure SSL options to enable HSTS with subdomains. Previous versions had false.
-Rails.application.config.ssl_options = { hsts: { subdomains: true } }

data/example/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_example_session'

data/example/config/initializers/simple_form.rb

@@ -1,169 +0,0 @@
-# Use this setup block to configure all options available in SimpleForm.
-SimpleForm.setup do |config|
-  # Wrappers are used by the form builder to generate a
-  # complete input. You can remove any component from the
-  # wrapper, change the order or even add your own to the
-  # stack. The options given below are used to wrap the
-  # whole input.
-  config.wrappers :default, class: :input,
-    hint_class: :field_with_hint, error_class: :field_with_errors do |b|
-    ## Extensions enabled by default
-    # Any of these extensions can be disabled for a
-    # given input by passing: `f.input EXTENSION_NAME => false`.
-    # You can make any of these extensions optional by
-    # renaming `b.use` to `b.optional`.
-
-    # Determines whether to use HTML5 (:email, :url, ...)
-    # and required attributes
-    b.use :html5
-
-    # Calculates placeholders automatically from I18n
-    # You can also pass a string as f.input placeholder: "Placeholder"
-    b.use :placeholder
-
-    ## Optional extensions
-    # They are disabled unless you pass `f.input EXTENSION_NAME => true`
-    # to the input. If so, they will retrieve the values from the model
-    # if any exists. If you want to enable any of those
-    # extensions by default, you can change `b.optional` to `b.use`.
-
-    # Calculates maxlength from length validations for string inputs
-    # and/or database column lengths
-    b.optional :maxlength
-
-    # Calculate minlength from length validations for string inputs
-    b.optional :minlength
-
-    # Calculates pattern from format validations for string inputs
-    b.optional :pattern
-
-    # Calculates min and max from length validations for numeric inputs
-    b.optional :min_max
-
-    # Calculates readonly automatically from readonly attributes
-    b.optional :readonly
-
-    ## Inputs
-    b.use :label_input
-    b.use :hint,  wrap_with: { tag: :span, class: :hint }
-    b.use :error, wrap_with: { tag: :span, class: :error }
-
-    ## full_messages_for
-    # If you want to display the full error message for the attribute, you can
-    # use the component :full_error, like:
-    #
-    # b.use :full_error, wrap_with: { tag: :span, class: :error }
-  end
-
-  # The default wrapper to be used by the FormBuilder.
-  config.default_wrapper = :default
-
-  # Define the way to render check boxes / radio buttons with labels.
-  # Defaults to :nested for bootstrap config.
-  #   inline: input + label
-  #   nested: label > input
-  config.boolean_style = :nested
-
-  # Default class for buttons
-  config.button_class = 'btn'
-
-  # Method used to tidy up errors. Specify any Rails Array method.
-  # :first lists the first message for each field.
-  # Use :to_sentence to list all errors for each field.
-  # config.error_method = :first
-
-  # Default tag used for error notification helper.
-  config.error_notification_tag = :div
-
-  # CSS class to add for error notification helper.
-  config.error_notification_class = 'error_notification'
-
-  # ID to add for error notification helper.
-  # config.error_notification_id = nil
-
-  # Series of attempts to detect a default label method for collection.
-  # config.collection_label_methods = [ :to_label, :name, :title, :to_s ]
-
-  # Series of attempts to detect a default value method for collection.
-  # config.collection_value_methods = [ :id, :to_s ]
-
-  # You can wrap a collection of radio/check boxes in a pre-defined tag, defaulting to none.
-  # config.collection_wrapper_tag = nil
-
-  # You can define the class to use on all collection wrappers. Defaulting to none.
-  # config.collection_wrapper_class = nil
-
-  # You can wrap each item in a collection of radio/check boxes with a tag,
-  # defaulting to :span.
-  # config.item_wrapper_tag = :span
-
-  # You can define a class to use in all item wrappers. Defaulting to none.
-  # config.item_wrapper_class = nil
-
-  # How the label text should be generated altogether with the required text.
-  # config.label_text = lambda { |label, required, explicit_label| "#{required} #{label}" }
-
-  # You can define the class to use on all labels. Default is nil.
-  # config.label_class = nil
-
-  # You can define the default class to be used on forms. Can be overriden
-  # with `html: { :class }`. Defaulting to none.
-  # config.default_form_class = nil
-
-  # You can define which elements should obtain additional classes
-  # config.generate_additional_classes_for = [:wrapper, :label, :input]
-
-  # Whether attributes are required by default (or not). Default is true.
-  # config.required_by_default = true
-
-  # Tell browsers whether to use the native HTML5 validations (novalidate form option).
-  # These validations are enabled in SimpleForm's internal config but disabled by default
-  # in this configuration, which is recommended due to some quirks from different browsers.
-  # To stop SimpleForm from generating the novalidate option, enabling the HTML5 validations,
-  # change this configuration to true.
-  config.browser_validations = false
-
-  # Collection of methods to detect if a file type was given.
-  # config.file_methods = [ :mounted_as, :file?, :public_filename ]
-
-  # Custom mappings for input types. This should be a hash containing a regexp
-  # to match as key, and the input type that will be used when the field name
-  # matches the regexp as value.
-  # config.input_mappings = { /count/ => :integer }
-
-  # Custom wrappers for input types. This should be a hash containing an input
-  # type as key and the wrapper that will be used for all inputs with specified type.
-  # config.wrapper_mappings = { string: :prepend }
-
-  # Namespaces where SimpleForm should look for custom input classes that
-  # override default inputs.
-  # config.custom_inputs_namespaces << "CustomInputs"
-
-  # Default priority for time_zone inputs.
-  # config.time_zone_priority = nil
-
-  # Default priority for country inputs.
-  # config.country_priority = nil
-
-  # When false, do not use translations for labels.
-  # config.translate_labels = true
-
-  # Automatically discover new inputs in Rails' autoload path.
-  # config.inputs_discovery = true
-
-  # Cache SimpleForm inputs discovery
-  # config.cache_discovery = !Rails.env.development?
-
-  # Default class for inputs
-  # config.input_class = nil
-
-  # Define the default class of the input wrapper of the boolean input.
-  config.boolean_label_class = 'checkbox'
-
-  # Defines if the default input wrapper class should be included in radio
-  # collection wrappers.
-  # config.include_default_input_wrapper_class = true
-
-  # Defines which i18n scope will be used in Simple Form.
-  # config.i18n_scope = 'simple_form'
-end