audit_trails 0.0.1

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,29 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,80 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both thread web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this).
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Generate digests for assets URLs.
+  config.assets.digest = true
+
+  # Version of your assets, change this if you want to expire all your assets.
+  config.assets.version = '1.0'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Set to :debug to see everything in the log.
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets.
+  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+  # config.assets.precompile += %w( search.js )
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Disable automatic flushing of the log to improve performance.
+  # config.autoflush_log = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,36 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  config.serve_static_assets  = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/test/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/test/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,12 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure your secret_key_base is kept private
+# if you're sharing your code publicly.
+Dummy::Application.config.secret_key_base = 'fdac6adf353e0c6f4df5981faafbaa2bc39f9e1ef5346c444a6cdf5a293587ecb8207fc9448e452aebff293ea37e7de28d092b1fccebe66f5ad58cf43b74e0d9'

data/test/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/test/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/test/dummy/config/routes.rb

@@ -0,0 +1,3 @@
+Rails.application.routes.draw do
+  mount AuditTrails::Engine => "/audit"
+end

data/test/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment',  __FILE__)
+run Rails.application

data/test/dummy/db/migrate/20131224060120_create_posts.rb

@@ -0,0 +1,9 @@
+class CreatePosts < ActiveRecord::Migration
+  def change
+    create_table :posts do |t|
+      t.text :content
+
+      t.timestamps
+    end
+  end
+end

data/test/dummy/db/migrate/20131227072919_create_audit_trails_audits.audit_trails.rb

@@ -0,0 +1,40 @@
+# This migration comes from audit_trails (originally 20131223143623)
+class CreateAuditTrailsAudits < ActiveRecord::Migration
+
+  def connection
+    ActiveRecord::Base.establish_connection(AuditTrails::AuditDb.adbconf).connection
+  end
+
+  def change
+    # Active Audit Table
+    create_table :audit_trails_audits do |t|
+      t.string :key
+      t.belongs_to :recipient, :polymorphic => true
+      t.integer :user_id
+      t.text :parameters
+      t.string :ip_address
+      t.text :message
+
+      t.timestamps
+    end
+
+    # BackLog Audit Table
+    create_table :audit_trails_audits_backlogs do |t|
+      t.string :key
+      t.belongs_to :recipient, :polymorphic => true
+      t.integer :user_id
+      t.text :parameters
+      t.string :ip_address
+      t.text :message
+
+      t.timestamps
+    end
+
+    self.revert_connection
+  end
+
+  def revert_connection
+    ActiveRecord::Base.establish_connection(AuditTrails::AuditDb.rdbconf).connection
+  end
+
+end

data/test/dummy/db/schema.rb

@@ -0,0 +1,22 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 20131227072919) do
+
+  create_table "posts", force: true do |t|
+    t.text     "content"
+    t.datetime "created_at"
+    t.datetime "updated_at"
+  end
+
+end

data/test/dummy/db_audit_trails/database_audit_trails.yml

@@ -0,0 +1,17 @@
+development: &development
+  adapter: sqlite3
+  database: db/audit_trails_development0.sqlite3
+  pool: 5
+  timeout: 5000
+
+test:
+  adapter: sqlite3
+  database: db/audit_trails_test0.sqlite3
+  pool: 5
+  timeout: 5000
+
+production:
+  adapter: sqlite3
+  database: db/audit_trails_production0.sqlite3
+  pool: 5
+  timeout: 5000

data/test/dummy/db_audit_trails/migrate/20131223143623_create_audit_trails_audits.rb

@@ -0,0 +1,14 @@
+class CreateAuditTrailsAudits < ActiveRecord::Migration
+  def change
+    create_table :audit_trails_audits do |t|
+      t.string :key
+      t.belongs_to :recipient , :polymorphic => true
+      t.integer :user_id
+      t.text :parameters
+      t.string :ip_address
+      t.text :message
+
+      t.timestamps
+    end
+  end
+end

data/test/dummy/db_audit_trails/schema.rb

@@ -0,0 +1,28 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 20131223143623) do
+
+  create_table "audit_trails_audits", force: true do |t|
+    t.string   "key"
+    t.integer  "recipient_id"
+    t.string   "recipient_type"
+    t.integer  "user_id"
+    t.text     "parameters"
+    t.string   "ip_address"
+    t.text     "message"
+    t.datetime "created_at"
+    t.datetime "updated_at"
+  end
+
+end

data/test/dummy/public/404.html

@@ -0,0 +1,58 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+  }
+
+  div.dialog {
+    width: 25em;
+    margin: 4em auto 0 auto;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 4em 0 4em;
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  body > p {
+    width: 33em;
+    margin: 0 auto 1em;
+    padding: 1em 0;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow:0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <h1>The page you were looking for doesn't exist.</h1>
+    <p>You may have mistyped the address or the page may have moved.</p>
+  </div>
+  <p>If you are the application owner check the logs for more information.</p>
+</body>
+</html>

data/test/dummy/public/422.html

@@ -0,0 +1,58 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The change you wanted was rejected (422)</title>
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+  }
+
+  div.dialog {
+    width: 25em;
+    margin: 4em auto 0 auto;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 4em 0 4em;
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  body > p {
+    width: 33em;
+    margin: 0 auto 1em;
+    padding: 1em 0;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow:0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/422.html -->
+  <div class="dialog">
+    <h1>The change you wanted was rejected.</h1>
+    <p>Maybe you tried to change something you didn't have access to.</p>
+  </div>
+  <p>If you are the application owner check the logs for more information.</p>
+</body>
+</html>

data/test/dummy/public/500.html

@@ -0,0 +1,57 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>We're sorry, but something went wrong (500)</title>
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+  }
+
+  div.dialog {
+    width: 25em;
+    margin: 4em auto 0 auto;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 4em 0 4em;
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  body > p {
+    width: 33em;
+    margin: 0 auto 1em;
+    padding: 1em 0;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow:0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/500.html -->
+  <div class="dialog">
+    <h1>We're sorry, but something went wrong.</h1>
+  </div>
+  <p>If you are the application owner check the logs for more information.</p>
+</body>
+</html>

data/test/dummy/test/fixtures/posts.yml

@@ -0,0 +1,7 @@
+# Read about fixtures at http://api.rubyonrails.org/classes/ActiveRecord/FixtureSet.html
+
+one:
+  content: MyText
+
+two:
+  content: MyText

data/test/dummy/test/models/post_test.rb

@@ -0,0 +1,7 @@
+require 'test_helper'
+
+class PostTest < ActiveSupport::TestCase
+  # test "the truth" do
+  #   assert true
+  # end
+end

data/test/dummy/tmp/pids/server.pid

@@ -0,0 +1 @@
+9723

data/test/fixtures/audit_trails/audits.yml

@@ -0,0 +1,11 @@
+# Read about fixtures at http://api.rubyonrails.org/classes/ActiveRecord/FixtureSet.html
+
+# This model initially had no columns defined.  If you add columns to the
+# model remove the '{}' from the fixture names and add the columns immediately
+# below each fixture, per the syntax in the comments below
+#
+one: {}
+# column: value
+#
+two: {}
+#  column: value

data/test/helpers/audit_trails/home_helper_test.rb

@@ -0,0 +1,6 @@
+require 'test_helper'
+
+module AuditTrails
+  class HomeHelperTest < ActionView::TestCase
+  end
+end

data/test/integration/navigation_test.rb

@@ -0,0 +1,10 @@
+require 'test_helper'
+
+class NavigationTest < ActionDispatch::IntegrationTest
+  fixtures :all
+
+  # test "the truth" do
+  #   assert true
+  # end
+end
+