aspose_pdf_cloud 20.9.0 → 21.10.1

data/test_data/sample.tex

@@ -1,105 +1,105 @@
-\documentclass{article}
-\usepackage{epsfig}
-\renewcommand{\baselinestretch}{1}
-\setlength{\textheight}{9in}
-\setlength{\textwidth}{6.5in}
-\setlength{\headheight}{0in}
-\setlength{\headsep}{0in}
-\setlength{\topmargin}{0in}
-\setlength{\oddsidemargin}{0in}
-\setlength{\evensidemargin}{0in}
-\setlength{\parindent}{.3in}
-\begin{document}
-
-\leftline{Pat Q.~Student}
-\leftline{AME 20231}
-\leftline{18 January 2013}
-
-\medskip
-This is a sample file in the text formatter \LaTeX.
-I require you to use it for the following reasons:
-
-\begin{itemize}
-
-\item{It produces the best output of text, figures,
-      and equations of any
-      program I've seen.}
-
-\item{It is machine-independent. It runs on Linux, Macintosh (see {\tt TeXShop}), and Windows (see {\tt MiKTeX}) machines.
-     You can e-mail {\tt ASCII} text versions of most relevant files.}
-
-\item{It is the tool of choice for many research
-     scientists and engineers.
-     Many journals accept 
-     \LaTeX~ submissions, and many books
-     are written in \LaTeX.}
-
-\end{itemize}
-\medskip
-Some basic instructions are given next.
-Put your text in here.  You can be a little sloppy    about
-spacing.  It adjusts the text to look good.
-{\small You can make the text smaller.}
-{\tiny You can make the text tiny.}
-
-Skip a line for a new paragraph.   
-You can use italics ({\em e.g.} {\em  Thermodynamics is everywhere}) or {\bf bold}.
-Greek letters are a snap: $\Psi$, $\psi$,
-$\Phi$, $\phi$.  Equations within text are easy---
-A well known Maxwell thermodynamic relation is
-$\left.{\partial T \over \partial p}\right|_{s} = 
-\left.{\partial v \over \partial s}\right|_{p}$.
-You can also set aside equations like so:
-\begin{eqnarray}
-du &=& Tds -p dv, \qquad \mbox{first law}\\
-ds &\ge& {dq \over T}.\qquad  \qquad \mbox{second law} \label{ee}
-\end{eqnarray}
-Eq.~(\ref{ee}) is the second law.
-References\footnote{Lamport, L., 1986, {\em \LaTeX: User's Guide \& Reference Manual},
-    Addison-Wesley: Reading, Massachusetts.}
-are available. 
-If you have an postscript file, say {\tt sample.figure.eps}, in the same local directory,
-you can insert the file as a figure.  Figure \ref{sample}, below, plots an isotherm for air modeled as an ideal gas. 
-\begin{figure}[ht]
-\epsfxsize=2.5in
-\centerline{\epsffile{sample.figure.eps}}
-\caption{Sample figure plotting $T=300~K$ isotherm for air when modeled as an ideal gas.}
-\label{sample}
-\end{figure}
-
-\medskip
-\leftline{\em Running \LaTeX}
-\medskip
-
-You can create a \LaTeX~ file with any text editor ({\tt vi}, {\tt emacs}, {\tt gedit}, 
-etc.). 
-To get a document, you need to run the \LaTeX~ application
-on the text file.  The text file must have the suffix ``{\tt .tex}''
-On a Linux cluster machine, this is done via the command
-
-\medskip
-{\tt latex file.tex}
-
-\medskip
-\noindent
-This generates three files: {\tt file.dvi}, {\tt file.aux},
-and {\tt file.log}.  The most important is {\tt file.dvi}. 
-
-\medskip
-\noindent
-The finished product can be previewed in the following way.
-Execute the commands:
-
-\medskip
-
-{\tt dvipdf file.dvi}\hspace{1.9in}{\em Linux System}
-
-\medskip
-\noindent
-This command generates {\tt file.pdf}.  
-Alternatively, you can use {\tt TeXShop} on a Macintosh or {\tt MiKTeX} on a Windows-based machine.
-The {\tt .tex} file must have a closing statement as
-below.
-
-
-\end{document}
+\documentclass{article}
+\usepackage{epsfig}
+\renewcommand{\baselinestretch}{1}
+\setlength{\textheight}{9in}
+\setlength{\textwidth}{6.5in}
+\setlength{\headheight}{0in}
+\setlength{\headsep}{0in}
+\setlength{\topmargin}{0in}
+\setlength{\oddsidemargin}{0in}
+\setlength{\evensidemargin}{0in}
+\setlength{\parindent}{.3in}
+\begin{document}
+
+\leftline{Pat Q.~Student}
+\leftline{AME 20231}
+\leftline{18 January 2013}
+
+\medskip
+This is a sample file in the text formatter \LaTeX.
+I require you to use it for the following reasons:
+
+\begin{itemize}
+
+\item{It produces the best output of text, figures,
+      and equations of any
+      program I've seen.}
+
+\item{It is machine-independent. It runs on Linux, Macintosh (see {\tt TeXShop}), and Windows (see {\tt MiKTeX}) machines.
+     You can e-mail {\tt ASCII} text versions of most relevant files.}
+
+\item{It is the tool of choice for many research
+     scientists and engineers.
+     Many journals accept 
+     \LaTeX~ submissions, and many books
+     are written in \LaTeX.}
+
+\end{itemize}
+\medskip
+Some basic instructions are given next.
+Put your text in here.  You can be a little sloppy    about
+spacing.  It adjusts the text to look good.
+{\small You can make the text smaller.}
+{\tiny You can make the text tiny.}
+
+Skip a line for a new paragraph.   
+You can use italics ({\em e.g.} {\em  Thermodynamics is everywhere}) or {\bf bold}.
+Greek letters are a snap: $\Psi$, $\psi$,
+$\Phi$, $\phi$.  Equations within text are easy---
+A well known Maxwell thermodynamic relation is
+$\left.{\partial T \over \partial p}\right|_{s} = 
+\left.{\partial v \over \partial s}\right|_{p}$.
+You can also set aside equations like so:
+\begin{eqnarray}
+du &=& Tds -p dv, \qquad \mbox{first law}\\
+ds &\ge& {dq \over T}.\qquad  \qquad \mbox{second law} \label{ee}
+\end{eqnarray}
+Eq.~(\ref{ee}) is the second law.
+References\footnote{Lamport, L., 1986, {\em \LaTeX: User's Guide \& Reference Manual},
+    Addison-Wesley: Reading, Massachusetts.}
+are available. 
+If you have an postscript file, say {\tt sample.figure.eps}, in the same local directory,
+you can insert the file as a figure.  Figure \ref{sample}, below, plots an isotherm for air modeled as an ideal gas. 
+\begin{figure}[ht]
+\epsfxsize=2.5in
+\centerline{\epsffile{sample.figure.eps}}
+\caption{Sample figure plotting $T=300~K$ isotherm for air when modeled as an ideal gas.}
+\label{sample}
+\end{figure}
+
+\medskip
+\leftline{\em Running \LaTeX}
+\medskip
+
+You can create a \LaTeX~ file with any text editor ({\tt vi}, {\tt emacs}, {\tt gedit}, 
+etc.). 
+To get a document, you need to run the \LaTeX~ application
+on the text file.  The text file must have the suffix ``{\tt .tex}''
+On a Linux cluster machine, this is done via the command
+
+\medskip
+{\tt latex file.tex}
+
+\medskip
+\noindent
+This generates three files: {\tt file.dvi}, {\tt file.aux},
+and {\tt file.log}.  The most important is {\tt file.dvi}. 
+
+\medskip
+\noindent
+The finished product can be previewed in the following way.
+Execute the commands:
+
+\medskip
+
+{\tt dvipdf file.dvi}\hspace{1.9in}{\em Linux System}
+
+\medskip
+\noindent
+This command generates {\tt file.pdf}.  
+Alternatively, you can use {\tt TeXShop} on a Macintosh or {\tt MiKTeX} on a Windows-based machine.
+The {\tt .tex} file must have a closing statement as
+below.
+
+
+\end{document}

metadata

@@ -1,29 +1,29 @@
 --- !ruby/object:Gem::Specification
 name: aspose_pdf_cloud
 version: !ruby/object:Gem::Version
-  version: 20.9.0
+  version: 21.10.1
 platform: ruby
 authors:
 - Aspose PDF Cloud
-autorequire: 
+autorequire:
 bindir: bin
 cert_chain: []
-date: 2020-09-17 00:00:00.000000000 Z
+date: 2021-11-12 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: json
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - "~>"
+    - - ">="
       - !ruby/object:Gem::Version
-        version: '1.7'
+        version: 2.3.0
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - "~>"
+    - - ">="
       - !ruby/object:Gem::Version
-        version: '1.7'
+        version: 2.3.0
 - !ruby/object:Gem::Dependency
   name: faraday
   requirement: !ruby/object:Gem::Requirement
@@ -52,21 +52,138 @@ dependencies:
     - - "~>"
       - !ruby/object:Gem::Version
         version: '5.8'
-description: 'Aspose.PDF Cloud is a REST API for creating and editing PDF files. It
-  can also be used to convert PDF files to different formats like DOC, HTML, XPS,
-  TIFF and many more. Aspose.PDF Cloud gives you control: create PDFs from scratch
-  or from HTML, XML, template, database, XPS or an image. Render PDFs to image formats
-  such as JPEG, PNG, GIF, BMP, TIFF and many others. Aspose.PDF Cloud helps you manipulate
-  elements of a PDF file like text, annotations, watermarks, signatures, bookmarks,
-  stamps and so on. Its REST API also allows you to manage PDF pages by using features
-  like merging, splitting, and inserting. Add images to a PDF file or convert PDF
-  pages to images.'
+description: |-
+  New version of Aspose.PDF Cloud is a REST API for creating and editing PDF files. It can also be used to convert PDF files to different formats like DOC, HTML, XPS, TIFF and many more. Aspose.PDF Cloud gives you control: create PDFs from scratch or from HTML, XML, template, database, XPS or an image. Render PDFs to image formats such as JPEG, PNG, GIF, BMP, TIFF and many others.
+  Aspose.PDF Cloud helps you manipulate elements of a PDF file like text, annotations, watermarks, signatures, bookmarks, stamps and so on. Its REST API also allows you to manage PDF pages by using features like merging, splitting, and inserting. Add images to a PDF file or convert PDF pages to images.
+  Aspose.PDF Cloud is well documented to help you create your solutions on different platforms.
+  https://products.aspose.cloud/pdf/family/
+  Rich Set of Features
+  Aspose.PDF Cloud features can be divided into three main areas:
+  Conversions: High quality conversions PDF to formats XLS, XLSX, PPTX, DOC, DOCX, EPUB, HTML, TeX, MobiXML, XML, XPS, FDF, XFDF, PDF/A
+  Rendering: Convert whole documents or pages to PDF, XPS or for server-side document generation. Also convert document pages to SVG, JPEG, EMF, PNG, BMP, GIF, TIFF images.
+  Document Object Model: Programmatic access through a rich API to all document elements allows to create, modify, extract, copy, split, join, and replace document content.
+  Aspose.PDF Cloud is designed to perform great. You can literally generate thousands of documents in minutes with Aspose.PDF Cloud and that involves opening a document, modifying content and formatting or populating it with data and saving it. Even most of the complex documents are opened and saved in fractions of a second.
+  Free support for Aspose.PDF Cloud is provided on our support forum:
+  https://forum.aspose.cloud/
+  and on StackOverflow:
+  https://stackoverflow.com/questions/tagged/aspose.pdf
 email:
 - ''
 executables: []
 extensions: []
 extra_rdoc_files: []
 files:
+- Examples/delete_annotation.rb
+- Examples/delete_document_annotations.rb
+- Examples/delete_page_annotations.rb
+- Examples/example_data/PdfWithAnnotations.pdf
+- Examples/get_carret_annotation.rb
+- Examples/get_circle_annotation.rb
+- Examples/get_circle_annotations.rb
+- Examples/get_document_annotations.rb
+- Examples/get_document_free_text_annotations.rb
+- Examples/get_document_highlight_annotations.rb
+- Examples/get_document_ink_annotations.rb
+- Examples/get_document_line_annotations.rb
+- Examples/get_document_movie_annotations.rb
+- Examples/get_document_polygon_annotations.rb
+- Examples/get_document_polyline_annotations.rb
+- Examples/get_document_popup_annotation_by_parent.rb
+- Examples/get_document_popup_annotations.rb
+- Examples/get_document_redaction_annotations.rb
+- Examples/get_document_screen_annotations.rb
+- Examples/get_document_sound_annotations.rb
+- Examples/get_document_squiggly_annotations.rb
+- Examples/get_document_stamp_annotations.rb
+- Examples/get_document_strike_out_annotation.rb
+- Examples/get_document_text_annotations.rb
+- Examples/get_document_underline_annotations.rb
+- Examples/get_documnet_carret_annotation.rb
+- Examples/get_file_attachment_annotation.rb
+- Examples/get_file_attachment_annotation_data.rb
+- Examples/get_file_attachment_annotations.rb
+- Examples/get_free_text_annotation.rb
+- Examples/get_hightlight_annotations.rb
+- Examples/get_ink_annotation.rb
+- Examples/get_line_annotation.rb
+- Examples/get_movie_annotation.rb
+- Examples/get_page_annotations.rb
+- Examples/get_page_carret_annotations.rb
+- Examples/get_page_file_attachment_annotations.rb
+- Examples/get_page_free_text_annotations.rb
+- Examples/get_page_highlight_annotations.rb
+- Examples/get_page_ink_annotations.rb
+- Examples/get_page_line_annotations.rb
+- Examples/get_page_movie_annotations.rb
+- Examples/get_page_polygon_annotations.rb
+- Examples/get_page_polyline_annotations.rb
+- Examples/get_page_redaction_annotations.rb
+- Examples/get_page_screen_annotations.rb
+- Examples/get_page_sound_annotations.rb
+- Examples/get_page_square_annotations.rb
+- Examples/get_page_squiggly_annotations.rb
+- Examples/get_page_stamp_annotations.rb
+- Examples/get_page_strikeout_annotations.rb
+- Examples/get_page_text_annotations.rb
+- Examples/get_page_underline_annotations.rb
+- Examples/get_polygon_annotation.rb
+- Examples/get_polyline_annotation.rb
+- Examples/get_redaction_annotation.rb
+- Examples/get_screen_annotation.rb
+- Examples/get_screen_annotation_data.rb
+- Examples/get_screen_annotations.rb
+- Examples/get_sound_annotation.rb
+- Examples/get_sound_annotation_data.rb
+- Examples/get_square_annotation.rb
+- Examples/get_squiggly_annotation.rb
+- Examples/get_stamp_annotation.rb
+- Examples/get_stamp_annotation_data.rb
+- Examples/get_strike_out_annotation.rb
+- Examples/get_text_annotation.rb
+- Examples/get_underline_annotation.rb
+- Examples/post_page_carret_annotations.rb
+- Examples/post_page_circle_annotations.rb
+- Examples/post_page_file_attachnment_annotations.rb
+- Examples/post_page_free_text_annotations.rb
+- Examples/post_page_hightlight_annotations.rb
+- Examples/post_page_ink_annotations.rb
+- Examples/post_page_line_annotations.rb
+- Examples/post_page_movie_annotations.rb
+- Examples/post_page_polygon_annotations.rb
+- Examples/post_page_polyline_annotations.rb
+- Examples/post_page_redaction_annotations.rb
+- Examples/post_page_screen_annotations.rb
+- Examples/post_page_sound_annotations.rb
+- Examples/post_page_square_annotations.rb
+- Examples/post_page_squiggly_annotations.rb
+- Examples/post_page_stamp_annotations.rb
+- Examples/post_page_strike_out_annotation.rb
+- Examples/post_page_text_annotations.rb
+- Examples/post_page_underline_annotations.rb
+- Examples/post_popup_annotation.rb
+- Examples/put_annotations_flatten.rb
+- Examples/put_carret_annotation.rb
+- Examples/put_circle_annotation.rb
+- Examples/put_file_attachment_annotation.rb
+- Examples/put_file_attachment_annotion_data_extract.rb
+- Examples/put_free_text_annotation.rb
+- Examples/put_highlight_annotation.rb
+- Examples/put_ink_annotation.rb
+- Examples/put_line_annotation.rb
+- Examples/put_movie_annotation.rb
+- Examples/put_polygon_annotation.rb
+- Examples/put_polyline_annotation.rb
+- Examples/put_redaction_annotation.rb
+- Examples/put_screen_annotation.rb
+- Examples/put_screen_annotation_data_extract.rb
+- Examples/put_sound_annotation.rb
+- Examples/put_sound_annotation_data_extract.rb
+- Examples/put_square_annotation.rb
+- Examples/put_squiggly_annotation.rb
+- Examples/put_stamp_annotation.rb
+- Examples/put_strike_out_annotation.rb
+- Examples/put_text_annotation.rb
+- Examples/put_underline_annotation.rb
 - LICENSE
 - README.md
 - aspose_pdf_cloud.gemspec
@@ -78,7 +195,6 @@ files:
 - docs/AnnotationsInfo.md
 - docs/AnnotationsInfoResponse.md
 - docs/AntialiasingProcessingType.md
-- docs/ApiInfo.md
 - docs/AsposeResponse.md
 - docs/Attachment.md
 - docs/AttachmentResponse.md
@@ -365,7 +481,6 @@ files:
 - lib/aspose_pdf_cloud/models/annotations_info.rb
 - lib/aspose_pdf_cloud/models/annotations_info_response.rb
 - lib/aspose_pdf_cloud/models/antialiasing_processing_type.rb
-- lib/aspose_pdf_cloud/models/api_info.rb
 - lib/aspose_pdf_cloud/models/aspose_response.rb
 - lib/aspose_pdf_cloud/models/attachment.rb
 - lib/aspose_pdf_cloud/models/attachment_response.rb
@@ -694,7 +809,7 @@ homepage: https://products.aspose.cloud/pdf/cloud
 licenses:
 - MIT
 metadata: {}
-post_install_message: 
+post_install_message:
 rdoc_options: []
 require_paths:
 - lib
@@ -709,9 +824,8 @@ required_rubygems_version: !ruby/object:Gem::Requirement
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubyforge_project: 
-rubygems_version: 2.7.3
-signing_key: 
+rubygems_version: 3.1.6
+signing_key:
 specification_version: 4
 summary: Aspose.PDF Cloud
 test_files:

data/docs/ApiInfo.md

@@ -1,10 +0,0 @@
-# AsposePdfCloud::ApiInfo
-Represents response for ApiInfo  DTO
-
-## Properties
-Name | Type | Description | Notes
------------- | ------------- | ------------- | -------------
-**name** | **String** | Product name. | [optional] 
-**version** | **String** | API version. | [optional] 
-
-

data/lib/aspose_pdf_cloud/models/api_info.rb

@@ -1,209 +0,0 @@
-=begin
---------------------------------------------------------------------------------------------------------------------
-  Copyright (c) 2020 Aspose.PDF Cloud
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
---------------------------------------------------------------------------------------------------------------------
-=end
-
-require 'date'
-require 'time'
-
-module AsposePdfCloud
-  # Represents response for ApiInfo  DTO
-  class ApiInfo
-    # Product name.
-    attr_accessor :name
-
-    # API version.
-    attr_accessor :version
-
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'name' => :'Name',
-        :'version' => :'Version'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'name' => :'String',
-        :'version' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
-
-      if attributes.has_key?(:'Name')
-        self.name = attributes[:'Name']
-      end
-
-      if attributes.has_key?(:'Version')
-        self.version = attributes[:'Version']
-      end
-
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properies with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      return invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      return true
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          name == o.name &&
-          version == o.version
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [name, version].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = AsposePdfCloud.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map{ |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-
-  end
-
-end