aspose_pdf_cloud 20.12.0 → 21.9.0

data/test_data/sample.tex

@@ -1,105 +1,105 @@
-\documentclass{article}
-\usepackage{epsfig}
-\renewcommand{\baselinestretch}{1}
-\setlength{\textheight}{9in}
-\setlength{\textwidth}{6.5in}
-\setlength{\headheight}{0in}
-\setlength{\headsep}{0in}
-\setlength{\topmargin}{0in}
-\setlength{\oddsidemargin}{0in}
-\setlength{\evensidemargin}{0in}
-\setlength{\parindent}{.3in}
-\begin{document}
-
-\leftline{Pat Q.~Student}
-\leftline{AME 20231}
-\leftline{18 January 2013}
-
-\medskip
-This is a sample file in the text formatter \LaTeX.
-I require you to use it for the following reasons:
-
-\begin{itemize}
-
-\item{It produces the best output of text, figures,
-      and equations of any
-      program I've seen.}
-
-\item{It is machine-independent. It runs on Linux, Macintosh (see {\tt TeXShop}), and Windows (see {\tt MiKTeX}) machines.
-     You can e-mail {\tt ASCII} text versions of most relevant files.}
-
-\item{It is the tool of choice for many research
-     scientists and engineers.
-     Many journals accept 
-     \LaTeX~ submissions, and many books
-     are written in \LaTeX.}
-
-\end{itemize}
-\medskip
-Some basic instructions are given next.
-Put your text in here.  You can be a little sloppy    about
-spacing.  It adjusts the text to look good.
-{\small You can make the text smaller.}
-{\tiny You can make the text tiny.}
-
-Skip a line for a new paragraph.   
-You can use italics ({\em e.g.} {\em  Thermodynamics is everywhere}) or {\bf bold}.
-Greek letters are a snap: $\Psi$, $\psi$,
-$\Phi$, $\phi$.  Equations within text are easy---
-A well known Maxwell thermodynamic relation is
-$\left.{\partial T \over \partial p}\right|_{s} = 
-\left.{\partial v \over \partial s}\right|_{p}$.
-You can also set aside equations like so:
-\begin{eqnarray}
-du &=& Tds -p dv, \qquad \mbox{first law}\\
-ds &\ge& {dq \over T}.\qquad  \qquad \mbox{second law} \label{ee}
-\end{eqnarray}
-Eq.~(\ref{ee}) is the second law.
-References\footnote{Lamport, L., 1986, {\em \LaTeX: User's Guide \& Reference Manual},
-    Addison-Wesley: Reading, Massachusetts.}
-are available. 
-If you have an postscript file, say {\tt sample.figure.eps}, in the same local directory,
-you can insert the file as a figure.  Figure \ref{sample}, below, plots an isotherm for air modeled as an ideal gas. 
-\begin{figure}[ht]
-\epsfxsize=2.5in
-\centerline{\epsffile{sample.figure.eps}}
-\caption{Sample figure plotting $T=300~K$ isotherm for air when modeled as an ideal gas.}
-\label{sample}
-\end{figure}
-
-\medskip
-\leftline{\em Running \LaTeX}
-\medskip
-
-You can create a \LaTeX~ file with any text editor ({\tt vi}, {\tt emacs}, {\tt gedit}, 
-etc.). 
-To get a document, you need to run the \LaTeX~ application
-on the text file.  The text file must have the suffix ``{\tt .tex}''
-On a Linux cluster machine, this is done via the command
-
-\medskip
-{\tt latex file.tex}
-
-\medskip
-\noindent
-This generates three files: {\tt file.dvi}, {\tt file.aux},
-and {\tt file.log}.  The most important is {\tt file.dvi}. 
-
-\medskip
-\noindent
-The finished product can be previewed in the following way.
-Execute the commands:
-
-\medskip
-
-{\tt dvipdf file.dvi}\hspace{1.9in}{\em Linux System}
-
-\medskip
-\noindent
-This command generates {\tt file.pdf}.  
-Alternatively, you can use {\tt TeXShop} on a Macintosh or {\tt MiKTeX} on a Windows-based machine.
-The {\tt .tex} file must have a closing statement as
-below.
-
-
-\end{document}
+\documentclass{article}
+\usepackage{epsfig}
+\renewcommand{\baselinestretch}{1}
+\setlength{\textheight}{9in}
+\setlength{\textwidth}{6.5in}
+\setlength{\headheight}{0in}
+\setlength{\headsep}{0in}
+\setlength{\topmargin}{0in}
+\setlength{\oddsidemargin}{0in}
+\setlength{\evensidemargin}{0in}
+\setlength{\parindent}{.3in}
+\begin{document}
+
+\leftline{Pat Q.~Student}
+\leftline{AME 20231}
+\leftline{18 January 2013}
+
+\medskip
+This is a sample file in the text formatter \LaTeX.
+I require you to use it for the following reasons:
+
+\begin{itemize}
+
+\item{It produces the best output of text, figures,
+      and equations of any
+      program I've seen.}
+
+\item{It is machine-independent. It runs on Linux, Macintosh (see {\tt TeXShop}), and Windows (see {\tt MiKTeX}) machines.
+     You can e-mail {\tt ASCII} text versions of most relevant files.}
+
+\item{It is the tool of choice for many research
+     scientists and engineers.
+     Many journals accept 
+     \LaTeX~ submissions, and many books
+     are written in \LaTeX.}
+
+\end{itemize}
+\medskip
+Some basic instructions are given next.
+Put your text in here.  You can be a little sloppy    about
+spacing.  It adjusts the text to look good.
+{\small You can make the text smaller.}
+{\tiny You can make the text tiny.}
+
+Skip a line for a new paragraph.   
+You can use italics ({\em e.g.} {\em  Thermodynamics is everywhere}) or {\bf bold}.
+Greek letters are a snap: $\Psi$, $\psi$,
+$\Phi$, $\phi$.  Equations within text are easy---
+A well known Maxwell thermodynamic relation is
+$\left.{\partial T \over \partial p}\right|_{s} = 
+\left.{\partial v \over \partial s}\right|_{p}$.
+You can also set aside equations like so:
+\begin{eqnarray}
+du &=& Tds -p dv, \qquad \mbox{first law}\\
+ds &\ge& {dq \over T}.\qquad  \qquad \mbox{second law} \label{ee}
+\end{eqnarray}
+Eq.~(\ref{ee}) is the second law.
+References\footnote{Lamport, L., 1986, {\em \LaTeX: User's Guide \& Reference Manual},
+    Addison-Wesley: Reading, Massachusetts.}
+are available. 
+If you have an postscript file, say {\tt sample.figure.eps}, in the same local directory,
+you can insert the file as a figure.  Figure \ref{sample}, below, plots an isotherm for air modeled as an ideal gas. 
+\begin{figure}[ht]
+\epsfxsize=2.5in
+\centerline{\epsffile{sample.figure.eps}}
+\caption{Sample figure plotting $T=300~K$ isotherm for air when modeled as an ideal gas.}
+\label{sample}
+\end{figure}
+
+\medskip
+\leftline{\em Running \LaTeX}
+\medskip
+
+You can create a \LaTeX~ file with any text editor ({\tt vi}, {\tt emacs}, {\tt gedit}, 
+etc.). 
+To get a document, you need to run the \LaTeX~ application
+on the text file.  The text file must have the suffix ``{\tt .tex}''
+On a Linux cluster machine, this is done via the command
+
+\medskip
+{\tt latex file.tex}
+
+\medskip
+\noindent
+This generates three files: {\tt file.dvi}, {\tt file.aux},
+and {\tt file.log}.  The most important is {\tt file.dvi}. 
+
+\medskip
+\noindent
+The finished product can be previewed in the following way.
+Execute the commands:
+
+\medskip
+
+{\tt dvipdf file.dvi}\hspace{1.9in}{\em Linux System}
+
+\medskip
+\noindent
+This command generates {\tt file.pdf}.  
+Alternatively, you can use {\tt TeXShop} on a Macintosh or {\tt MiKTeX} on a Windows-based machine.
+The {\tt .tex} file must have a closing statement as
+below.
+
+
+\end{document}

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aspose_pdf_cloud
 version: !ruby/object:Gem::Version
-  version: 20.12.0
+  version: 21.9.0
 platform: ruby
 authors:
 - Aspose PDF Cloud
-autorequire: 
+autorequire:
 bindir: bin
 cert_chain: []
-date: 2020-12-16 00:00:00.000000000 Z
+date: 2021-10-07 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: json
@@ -67,6 +67,117 @@ executables: []
 extensions: []
 extra_rdoc_files: []
 files:
+- Examples/delete_annotation.rb
+- Examples/delete_document_annotations.rb
+- Examples/delete_page_annotations.rb
+- Examples/example_data/PdfWithAnnotations.pdf
+- Examples/get_carret_annotation.rb
+- Examples/get_circle_annotation.rb
+- Examples/get_circle_annotations.rb
+- Examples/get_document_annotations.rb
+- Examples/get_document_free_text_annotations.rb
+- Examples/get_document_highlight_annotations.rb
+- Examples/get_document_ink_annotations.rb
+- Examples/get_document_line_annotations.rb
+- Examples/get_document_movie_annotations.rb
+- Examples/get_document_polygon_annotations.rb
+- Examples/get_document_polyline_annotations.rb
+- Examples/get_document_popup_annotation_by_parent.rb
+- Examples/get_document_popup_annotations.rb
+- Examples/get_document_redaction_annotations.rb
+- Examples/get_document_screen_annotations.rb
+- Examples/get_document_sound_annotations.rb
+- Examples/get_document_squiggly_annotations.rb
+- Examples/get_document_stamp_annotations.rb
+- Examples/get_document_strike_out_annotation.rb
+- Examples/get_document_text_annotations.rb
+- Examples/get_document_underline_annotations.rb
+- Examples/get_documnet_carret_annotation.rb
+- Examples/get_file_attachment_annotation.rb
+- Examples/get_file_attachment_annotation_data.rb
+- Examples/get_file_attachment_annotations.rb
+- Examples/get_free_text_annotation.rb
+- Examples/get_hightlight_annotations.rb
+- Examples/get_ink_annotation.rb
+- Examples/get_line_annotation.rb
+- Examples/get_movie_annotation.rb
+- Examples/get_page_annotations.rb
+- Examples/get_page_carret_annotations.rb
+- Examples/get_page_file_attachment_annotations.rb
+- Examples/get_page_free_text_annotations.rb
+- Examples/get_page_highlight_annotations.rb
+- Examples/get_page_ink_annotations.rb
+- Examples/get_page_line_annotations.rb
+- Examples/get_page_movie_annotations.rb
+- Examples/get_page_polygon_annotations.rb
+- Examples/get_page_polyline_annotations.rb
+- Examples/get_page_redaction_annotations.rb
+- Examples/get_page_screen_annotations.rb
+- Examples/get_page_sound_annotations.rb
+- Examples/get_page_square_annotations.rb
+- Examples/get_page_squiggly_annotations.rb
+- Examples/get_page_stamp_annotations.rb
+- Examples/get_page_strikeout_annotations.rb
+- Examples/get_page_text_annotations.rb
+- Examples/get_page_underline_annotations.rb
+- Examples/get_polygon_annotation.rb
+- Examples/get_polyline_annotation.rb
+- Examples/get_redaction_annotation.rb
+- Examples/get_screen_annotation.rb
+- Examples/get_screen_annotation_data.rb
+- Examples/get_screen_annotations.rb
+- Examples/get_sound_annotation.rb
+- Examples/get_sound_annotation_data.rb
+- Examples/get_square_annotation.rb
+- Examples/get_squiggly_annotation.rb
+- Examples/get_stamp_annotation.rb
+- Examples/get_stamp_annotation_data.rb
+- Examples/get_strike_out_annotation.rb
+- Examples/get_text_annotation.rb
+- Examples/get_underline_annotation.rb
+- Examples/post_page_carret_annotations.rb
+- Examples/post_page_circle_annotations.rb
+- Examples/post_page_file_attachnment_annotations.rb
+- Examples/post_page_free_text_annotations.rb
+- Examples/post_page_hightlight_annotations.rb
+- Examples/post_page_ink_annotations.rb
+- Examples/post_page_line_annotations.rb
+- Examples/post_page_movie_annotations.rb
+- Examples/post_page_polygon_annotations.rb
+- Examples/post_page_polyline_annotations.rb
+- Examples/post_page_redaction_annotations.rb
+- Examples/post_page_screen_annotations.rb
+- Examples/post_page_sound_annotations.rb
+- Examples/post_page_square_annotations.rb
+- Examples/post_page_squiggly_annotations.rb
+- Examples/post_page_stamp_annotations.rb
+- Examples/post_page_strike_out_annotation.rb
+- Examples/post_page_text_annotations.rb
+- Examples/post_page_underline_annotations.rb
+- Examples/post_popup_annotation.rb
+- Examples/put_annotations_flatten.rb
+- Examples/put_carret_annotation.rb
+- Examples/put_circle_annotation.rb
+- Examples/put_file_attachment_annotation.rb
+- Examples/put_file_attachment_annotion_data_extract.rb
+- Examples/put_free_text_annotation.rb
+- Examples/put_highlight_annotation.rb
+- Examples/put_ink_annotation.rb
+- Examples/put_line_annotation.rb
+- Examples/put_movie_annotation.rb
+- Examples/put_polygon_annotation.rb
+- Examples/put_polyline_annotation.rb
+- Examples/put_redaction_annotation.rb
+- Examples/put_screen_annotation.rb
+- Examples/put_screen_annotation_data_extract.rb
+- Examples/put_sound_annotation.rb
+- Examples/put_sound_annotation_data_extract.rb
+- Examples/put_square_annotation.rb
+- Examples/put_squiggly_annotation.rb
+- Examples/put_stamp_annotation.rb
+- Examples/put_strike_out_annotation.rb
+- Examples/put_text_annotation.rb
+- Examples/put_underline_annotation.rb
 - LICENSE
 - README.md
 - aspose_pdf_cloud.gemspec
@@ -78,7 +189,6 @@ files:
 - docs/AnnotationsInfo.md
 - docs/AnnotationsInfoResponse.md
 - docs/AntialiasingProcessingType.md
-- docs/ApiInfo.md
 - docs/AsposeResponse.md
 - docs/Attachment.md
 - docs/AttachmentResponse.md
@@ -365,7 +475,6 @@ files:
 - lib/aspose_pdf_cloud/models/annotations_info.rb
 - lib/aspose_pdf_cloud/models/annotations_info_response.rb
 - lib/aspose_pdf_cloud/models/antialiasing_processing_type.rb
-- lib/aspose_pdf_cloud/models/api_info.rb
 - lib/aspose_pdf_cloud/models/aspose_response.rb
 - lib/aspose_pdf_cloud/models/attachment.rb
 - lib/aspose_pdf_cloud/models/attachment_response.rb
@@ -694,7 +803,7 @@ homepage: https://products.aspose.cloud/pdf/cloud
 licenses:
 - MIT
 metadata: {}
-post_install_message: 
+post_install_message:
 rdoc_options: []
 require_paths:
 - lib
@@ -709,9 +818,8 @@ required_rubygems_version: !ruby/object:Gem::Requirement
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubyforge_project: 
-rubygems_version: 2.7.3
-signing_key: 
+rubygems_version: 3.1.6
+signing_key:
 specification_version: 4
 summary: Aspose.PDF Cloud
 test_files:

data/docs/ApiInfo.md

@@ -1,10 +0,0 @@
-# AsposePdfCloud::ApiInfo
-Represents response for ApiInfo  DTO
-
-## Properties
-Name | Type | Description | Notes
------------- | ------------- | ------------- | -------------
-**name** | **String** | Product name. | [optional] 
-**version** | **String** | API version. | [optional] 
-
-

data/lib/aspose_pdf_cloud/models/api_info.rb

@@ -1,209 +0,0 @@
-=begin
---------------------------------------------------------------------------------------------------------------------
-  Copyright (c) 2020 Aspose.PDF Cloud
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
---------------------------------------------------------------------------------------------------------------------
-=end
-
-require 'date'
-require 'time'
-
-module AsposePdfCloud
-  # Represents response for ApiInfo  DTO
-  class ApiInfo
-    # Product name.
-    attr_accessor :name
-
-    # API version.
-    attr_accessor :version
-
-
-    # Attribute mapping from ruby-style variable name to JSON key.
-    def self.attribute_map
-      {
-        :'name' => :'Name',
-        :'version' => :'Version'
-      }
-    end
-
-    # Attribute type mapping.
-    def self.swagger_types
-      {
-        :'name' => :'String',
-        :'version' => :'String'
-      }
-    end
-
-    # Initializes the object
-    # @param [Hash] attributes Model attributes in the form of hash
-    def initialize(attributes = {})
-      return unless attributes.is_a?(Hash)
-
-      # convert string to symbol for hash key
-      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
-
-      if attributes.has_key?(:'Name')
-        self.name = attributes[:'Name']
-      end
-
-      if attributes.has_key?(:'Version')
-        self.version = attributes[:'Version']
-      end
-
-    end
-
-    # Show invalid properties with the reasons. Usually used together with valid?
-    # @return Array for valid properies with the reasons
-    def list_invalid_properties
-      invalid_properties = Array.new
-      return invalid_properties
-    end
-
-    # Check to see if the all the properties in the model are valid
-    # @return true if the model is valid
-    def valid?
-      return true
-    end
-
-    # Checks equality by comparing each attribute.
-    # @param [Object] Object to be compared
-    def ==(o)
-      return true if self.equal?(o)
-      self.class == o.class &&
-          name == o.name &&
-          version == o.version
-    end
-
-    # @see the `==` method
-    # @param [Object] Object to be compared
-    def eql?(o)
-      self == o
-    end
-
-    # Calculates hash code according to all attributes.
-    # @return [Fixnum] Hash code
-    def hash
-      [name, version].hash
-    end
-
-    # Builds the object from hash
-    # @param [Hash] attributes Model attributes in the form of hash
-    # @return [Object] Returns the model itself
-    def build_from_hash(attributes)
-      return nil unless attributes.is_a?(Hash)
-      self.class.swagger_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
-          # check to ensure the input is an array given that the the attribute
-          # is documented as an array but the input is not
-          if attributes[self.class.attribute_map[key]].is_a?(Array)
-            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
-          end
-        elsif !attributes[self.class.attribute_map[key]].nil?
-          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
-      end
-
-      self
-    end
-
-    # Deserializes the data based on type
-    # @param string type Data type
-    # @param string value Value to be deserialized
-    # @return [Object] Deserialized data
-    def _deserialize(type, value)
-      case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
-      when :Date
-        Date.parse(value)
-      when :String
-        value.to_s
-      when :Integer
-        value.to_i
-      when :Float
-        value.to_f
-      when :BOOLEAN
-        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
-          true
-        else
-          false
-        end
-      when :Object
-        # generic object (usually a Hash), return directly
-        value
-      when /\AArray<(?<inner_type>.+)>\z/
-        inner_type = Regexp.last_match[:inner_type]
-        value.map { |v| _deserialize(inner_type, v) }
-      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
-        k_type = Regexp.last_match[:k_type]
-        v_type = Regexp.last_match[:v_type]
-        {}.tap do |hash|
-          value.each do |k, v|
-            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
-          end
-        end
-      else # model
-        temp_model = AsposePdfCloud.const_get(type).new
-        temp_model.build_from_hash(value)
-      end
-    end
-
-    # Returns the string representation of the object
-    # @return [String] String presentation of the object
-    def to_s
-      to_hash.to_s
-    end
-
-    # to_body is an alias to to_hash (backward compatibility)
-    # @return [Hash] Returns the object in the form of hash
-    def to_body
-      to_hash
-    end
-
-    # Returns the object in the form of hash
-    # @return [Hash] Returns the object in the form of hash
-    def to_hash
-      hash = {}
-      self.class.attribute_map.each_pair do |attr, param|
-        value = self.send(attr)
-        next if value.nil?
-        hash[param] = _to_hash(value)
-      end
-      hash
-    end
-
-    # Outputs non-array value in the form of hash
-    # For object, use to_hash. Otherwise, just return the value
-    # @param [Object] value Any valid value
-    # @return [Hash] Returns the value in the form of hash
-    def _to_hash(value)
-      if value.is_a?(Array)
-        value.compact.map{ |v| _to_hash(v) }
-      elsif value.is_a?(Hash)
-        {}.tap do |hash|
-          value.each { |k, v| hash[k] = _to_hash(v) }
-        end
-      elsif value.respond_to? :to_hash
-        value.to_hash
-      else
-        value
-      end
-    end
-
-  end
-
-end