archive-tar-minitar 0.5.1

data/ChangeLog

@@ -0,0 +1,11 @@
+Revision history for Ruby library Archive::Tar::Minitar. Unless explicitly
+noted otherwise, all changes are produced by Austin Ziegler
+<minitar@halostatue.ca>.
+
+== 0.5.1
+* Fixed a variable name error.
+
+== Archive::Tar::Minitar 0.5.0
+* Initial release. Does files and directories. Command does create, extract,
+* and list.
+

data/Install

@@ -0,0 +1,6 @@
+Installing this package is as simple as:
+
+% ruby install.rb
+
+Alternatively, you can use the RubyGem version of Archive::Tar::Minitar
+available as archive-tar-minitar-0.5.1.gem from the usual sources.

data/README

@@ -0,0 +1,66 @@
+Archive::Tar::Minitar README
+============================
+Archive::Tar::Minitar is a pure-Ruby library and command-line utility that
+provides the ability to deal with POSIX tar(1) archive files. The
+implementation is based heavily on Mauricio Fern�ndez's implementation in
+rpa-base, but has been reorganised to promote reuse in other projects.
+
+This release is version 0.5.1, offering a bugfix over version 0.5.0. The
+library can only handle files and directories at this point. A future version
+will be expanded to handle symbolic links and hard links in a portable manner.
+The command line utility, minitar, can only create archives, extract from
+archives, and list archive contents.
+
+Using this library is easy. The simplest case is:
+
+  require 'zlib'
+  require 'archive/tar/minitar'
+  include Archive::Tar
+
+    # Packs everything that matches Find.find('tests')
+  File.open('test.tar', 'wb') { |tar| Minitar.pack('tests', tar) }
+    # Unpacks 'test.tar' to 'x', creating 'x' if necessary.
+  Minitar.unpack('test.tar', 'x')
+
+A gzipped tar can be written with:
+
+    tgz = Zlib::GzipWriter.new(File.open('test.tgz', 'wb'))
+      # Warning: tgz will be closed!
+    Minitar.pack('tests', tgz)
+
+    tgz = Zlib::GzipReader.new(File.open('test.tgz', 'rb'))
+      # Warning: tgz will be closed!
+    Minitar.unpack(tgz, 'x')
+
+As the case above shows, one need not write to a file. However, it will
+sometimes require that one dive a little deeper into the API, as in the case
+of StringIO objects. Note that I'm not providing a block with Minitar::Output,
+as Minitar::Output#close automatically closes both the Output object and the
+wrapped data stream object.
+
+  begin
+    sgz = Zlib::GzipWriter.new(StringIO.new(""))
+    tar = Output.new(sgz)
+    Find.find('tests') do |entry|
+      Minitar.pack_file(entry, tar)
+    end
+  ensure
+      # Closes both tar and sgz.
+    tar.close
+  end
+
+Copyright
+=========
+# Copyright 2004 Mauricio Julio Fern�ndez Pradier and Austin Ziegler
+#
+# This program is based on and incorporates parts of RPA::Package from
+# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
+# adapted to be more generic by Austin.
+#
+# 'minitar' contains an adaptation of Ruby/ProgressBar by Satoru
+# Takabayashi <satoru@namazu.org>, copyright � 2001 - 2004.
+#
+# This program is free software. It may be redistributed and/or modified
+# under the terms of the GPL version 2 (or later) or Ruby's licence.
+# 
+# $Id: README,v 1.2 2004/09/22 17:47:43 austin Exp $

data/Rakefile

@@ -0,0 +1,115 @@
+#! /usr/bin/env rake
+$LOAD_PATH.unshift('lib')
+
+require 'rubygems'
+require 'rake/gempackagetask'
+require 'rake/contrib/rubyforgepublisher'
+require 'archive/tar/minitar'
+require 'zlib'
+
+DISTDIR = "archive-tar-minitar-#{Archive::Tar::Minitar::VERSION}"
+TARDIST = "../#{DISTDIR}.tar.gz"
+
+DATE_RE = %r<(\d{4})[./-]?(\d{2})[./-]?(\d{2})(?:[\sT]?(\d{2})[:.]?(\d{2})[:.]?(\d{2})?)?>
+
+if ENV['RELEASE_DATE']
+  year, month, day, hour, minute, second = DATE_RE.match(ENV['RELEASE_DATE']).captures
+  year ||= 0
+  month ||= 0
+  day ||= 0
+  hour ||= 0
+  minute ||= 0
+  second ||= 0
+  ReleaseDate = Time.mktime(year, month, day, hour, minute, second)
+else
+  ReleaseDate = nil
+end
+
+task :test do |t|
+  require 'test/unit/testsuite'
+  require 'test/unit/ui/console/testrunner'
+
+  runner = Test::Unit::UI::Console::TestRunner
+
+  $LOAD_PATH.unshift('tests')
+  $stderr.puts "Checking for test cases:" if t.verbose
+  Dir['tests/tc_*.rb'].each do |testcase|
+    $stderr.puts "\t#{testcase}" if t.verbose
+    load testcase
+  end
+
+  suite = Test::Unit::TestSuite.new
+
+  ObjectSpace.each_object(Class) do |testcase|
+    suite << testcase.suite if testcase < Test::Unit::TestCase
+  end
+
+  runner.run(suite)
+end
+
+spec = eval(File.read("archive-tar-minitar.gemspec"))
+desc "Build the RubyGem for Archive::Tar::Minitar."
+task :gem => [ :test ]
+Rake::GemPackageTask.new(spec) do |g|
+  g.need_tar    = false
+  g.need_zip    = false
+  g.package_dir = ".."
+end
+
+desc "Build an Archive::Tar::Minitar .tar.gz distribution."
+task :tar => [ TARDIST ]
+file TARDIST do |t|
+  current = File.basename(Dir.pwd)
+  Dir.chdir("..") do
+    begin
+      files = Dir["#{current}/**/*"].select { |dd| dd !~ %r{(?:/CVS/?|~$)} }
+      files.map! do |dd|
+        ddnew = dd.gsub(/^#{current}/, DISTDIR)
+        mtime = ReleaseDate || File.stat(dd).mtime
+        if File.directory?(dd)
+          { :name => ddnew, :mode => 0755, :dir => true, :mtime => mtime }
+        else
+          if dd =~ %r{bin/}
+            mode = 0755
+          else
+            mode = 0644
+          end
+          data = File.read(dd)
+          { :name => ddnew, :mode => mode, :data => data, :size => data.size,
+            :mtime => mtime }
+        end
+      end
+
+      ff = File.open(t.name.gsub(%r{^\.\./}o, ''), "wb")
+      gz = Zlib::GzipWriter.new(ff)
+      tw = Archive::Tar::Minitar::Writer.new(gz)
+
+      files.each do |entry|
+        if entry[:dir]
+          tw.mkdir(entry[:name], entry)
+        else
+          tw.add_file_simple(entry[:name], entry) { |os| os.write(entry[:data]) }
+        end
+      end
+    ensure
+      tw.close if tw
+      gz.close if gz
+    end
+  end
+end
+task TARDIST => [ :test ]
+
+def sign(file)
+  sh %("C:\\Program Files\\Windows Privacy Tools\\GnuPG\\Gpg.exe" -ba #{file})
+end
+
+task :signtar => [ :tar ] do
+  sign TARDIST
+end
+task :signgem => [ :gem ] do
+  sign "../#{DISTDIR}.gem"
+end
+
+desc "Build everything."
+task :default => [ :signtar, :signgem ] do
+end

data/bin/minitar

@@ -0,0 +1,26 @@
+#!/usr/bin/env ruby
+#--
+# Archive::Tar::Minitar 0.5.1
+#   Copyright � 2004 Mauricio Julio Fern�ndez Pradier and Austin Ziegler
+#
+# This program is based on and incorporates parts of RPA::Package from
+# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
+# adapted to be more generic by Austin.
+#
+# It is licensed under the GNU General Public Licence or Ruby's licence.
+#
+# $Id: minitar,v 1.2 2004/09/22 17:47:43 austin Exp $
+#++
+
+  # 1) Try to load Archive::Tar::Minitar from the gem.
+  # 2) Try to load Archive::Tar::Minitar from $LOAD_PATH.
+begin
+  require 'rubygems'
+  require_gem 'archive-tar-minitar', '= 0.5.1'
+rescue LoadError
+  require 'archive/tar/minitar'
+end
+
+require 'archive/tar/minitar/command'
+
+exit Archive::Tar::Minitar::Command.run(ARGV)

data/lib/archive/tar/minitar.rb

@@ -0,0 +1,979 @@
+#!/usr/bin/env ruby
+#--
+# Archive::Tar::Minitar 0.5.1
+#   Copyright � 2004 Mauricio Julio Fern�ndez Pradier and Austin Ziegler
+#
+# This program is based on and incorporates parts of RPA::Package from
+# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
+# adapted to be more generic by Austin.
+#
+# It is licensed under the GNU General Public Licence or Ruby's licence.
+#
+# $Id: minitar.rb,v 1.3 2004/09/22 17:47:43 austin Exp $
+#++
+
+module Archive; end
+module Archive::Tar; end
+
+  # = Archive::Tar::PosixHeader
+  # Implements the POSIX tar header as a Ruby class. The structure of
+  # the POSIX tar header is:
+  #
+  #   struct tarfile_entry_posix
+  #   {                      //                               pack/unpack
+  #      char name[100];     // ASCII (+ Z unless filled)     a100/Z100
+  #      char mode[8];       // 0 padded, octal, null         a8  /A8
+  #      char uid[8];        // ditto                         a8  /A8
+  #      char gid[8];        // ditto                         a8  /A8
+  #      char size[12];      // 0 padded, octal, null         a12 /A12
+  #      char mtime[12];     // 0 padded, octal, null         a12 /A12
+  #      char checksum[8];   // 0 padded, octal, null, space  a8  /A8
+  #      char typeflag[1];   // see below                     a   /a
+  #      char linkname[100]; // ASCII + (Z unless filled)     a100/Z100
+  #      char magic[6];      // "ustar\0"                     a6  /A6
+  #      char version[2];    // "00"                          a2  /A2
+  #      char uname[32];     // ASCIIZ                        a32 /Z32
+  #      char gname[32];     // ASCIIZ                        a32 /Z32
+  #      char devmajor[8];   // 0 padded, octal, null         a8  /A8
+  #      char devminor[8];   // 0 padded, octal, null         a8  /A8
+  #      char prefix[155];   // ASCII (+ Z unless filled)     a155/Z155
+  #   };
+  #
+  # The +typeflag+ may be one of the following known values:
+  #
+  # <tt>"0"</tt>::  Regular file. NULL should be treated as a synonym, for
+  #                 compatibility purposes.
+  # <tt>"1"</tt>::  Hard link.
+  # <tt>"2"</tt>::  Symbolic link.
+  # <tt>"3"</tt>::  Character device node.
+  # <tt>"4"</tt>::  Block device node.
+  # <tt>"5"</tt>::  Directory.
+  # <tt>"6"</tt>::  FIFO node.
+  # <tt>"7"</tt>::  Reserved.
+  #
+  # POSIX indicates that "A POSIX-compliant implementation must treat any
+  # unrecognized typeflag value as a regular file."
+class Archive::Tar::PosixHeader
+  FIELDS = %w(name mode uid gid size mtime checksum typeflag linkname) +
+           %w(magic version uname gname devmajor devminor prefix)
+
+  FIELDS.each { |field| attr_reader field.intern }
+
+  HEADER_PACK_FORMAT    = "a100a8a8a8a12a12a7aaa100a6a2a32a32a8a8a155"
+  HEADER_UNPACK_FORMAT  = "Z100A8A8A8A12A12A8aZ100A6A2Z32Z32A8A8Z155"
+
+    # Creates a new PosixHeader from a data stream.
+  def self.new_from_stream(stream)
+    data = stream.read(512)
+    fields    = data.unpack(HEADER_UNPACK_FORMAT)
+    name      = fields.shift
+    mode      = fields.shift.oct
+    uid       = fields.shift.oct
+    gid       = fields.shift.oct
+    size      = fields.shift.oct
+    mtime     = fields.shift.oct
+    checksum  = fields.shift.oct
+    typeflag  = fields.shift
+    linkname  = fields.shift
+    magic     = fields.shift
+    version   = fields.shift.oct
+    uname     = fields.shift
+    gname     = fields.shift
+    devmajor  = fields.shift.oct
+    devminor  = fields.shift.oct
+    prefix    = fields.shift
+
+    empty = (data == "\0" * 512)
+
+    new(:name => name, :mode => mode, :uid => uid, :gid => gid,
+        :size => size, :mtime => mtime, :checksum => checksum,
+        :typeflag => typeflag, :magic => magic, :version => version,
+        :uname => uname, :gname => gname, :devmajor => devmajor,
+        :devminor => devminor, :prefix => prefix, :empty => empty)
+  end
+
+    # Creates a new PosixHeader. A PosixHeader cannot be created unless the
+    # #name, #size, #prefix, and #mode are provided.
+  def initialize(vals)
+    unless vals[:name] && vals[:size] && vals[:prefix] && vals[:mode]
+      raise ArgumentError
+    end
+
+    vals[:mtime]    ||= 0
+    vals[:checksum] ||= ""
+    vals[:typeflag] ||= "0"
+    vals[:magic]    ||= "ustar"
+    vals[:version]  ||= "00"
+
+    FIELDS.each do |field|
+      instance_variable_set("@#{field}", vals[field.intern])
+    end
+    @empty = vals[:empty]
+  end
+
+  def empty?
+    @empty
+  end
+
+  def to_s
+    update_checksum
+    header(@checksum)
+  end
+
+    # Update the checksum field.
+  def update_checksum
+    hh = header(" " * 8)
+    @checksum = oct(calculate_checksum(hh), 6)
+  end
+
+  private
+  def oct(num, len)
+    if num.nil?
+      "\0" * (len + 1)
+    else
+      "%0#{len}o" % num
+    end
+  end
+
+  def calculate_checksum(hdr)
+    hdr.unpack("C*").inject { |aa, bb| aa + bb }
+  end
+
+  def header(chksum)
+    arr = [name, oct(mode, 7), oct(uid, 7), oct(gid, 7), oct(size, 11),
+    oct(mtime, 11), chksum, " ", typeflag, linkname, magic, version,
+    uname, gname, oct(devmajor, 7), oct(devminor, 7), prefix]
+    str = arr.pack(HEADER_PACK_FORMAT)
+    str + "\0" * ((512 - str.size) % 512)
+  end
+end
+
+require 'fileutils'
+require 'find'
+
+  # = Archive::Tar::Minitar 0.5.1
+  # Archive::Tar::Minitar is a pure-Ruby library and command-line
+  # utility that provides the ability to deal with POSIX tar(1) archive
+  # files. The implementation is based heavily on Mauricio Fern�ndez's
+  # implementation in rpa-base, but has been reorganised to promote
+  # reuse in other projects.
+  #
+  # This tar class performs a subset of all tar (POSIX tape archive)
+  # operations. We can only deal with typeflags 0, 1, 2, and 5 (see
+  # Archive::Tar::PosixHeader). All other typeflags will be treated as
+  # normal files.
+  #
+  # NOTE::: support for typeflags 1 and 2 is not yet implemented in this
+  #         version.
+  #
+  # This release is version 0.5.1. The library can only handle files and
+  # directories at this point. A future version will be expanded to
+  # handle symbolic links and hard links in a portable manner. The
+  # command line utility, minitar, can only create archives, extract
+  # from archives, and list archive contents.
+  #
+  # == Synopsis
+  # Using this library is easy. The simplest case is:
+  #
+  #   require 'zlib'
+  #   require 'archive/tar/minitar'
+  #   include Archive::Tar
+  #
+  #     # Packs everything that matches Find.find('tests')
+  #   File.open('test.tar', 'wb') { |tar| Minitar.pack('tests', tar) }
+  #     # Unpacks 'test.tar' to 'x', creating 'x' if necessary.
+  #   Minitar.unpack('test.tar', 'x')
+  #
+  # A gzipped tar can be written with:
+  #
+  #   tgz = Zlib::GzipWriter.new(File.open('test.tgz', 'wb'))
+  #     # Warning: tgz will be closed!
+  #   Minitar.pack('tests', tgz)
+  #
+  #   tgz = Zlib::GzipReader.new(File.open('test.tgz', 'rb'))
+  #     # Warning: tgz will be closed!
+  #   Minitar.unpack(tgz, 'x')
+  #
+  # As the case above shows, one need not write to a file. However, it
+  # will sometimes require that one dive a little deeper into the API,
+  # as in the case of StringIO objects. Note that I'm not providing a
+  # block with Minitar::Output, as Minitar::Output#close automatically
+  # closes both the Output object and the wrapped data stream object.
+  #
+  #   begin
+  #     sgz = Zlib::GzipWriter.new(StringIO.new(""))
+  #     tar = Output.new(sgz)
+  #     Find.find('tests') do |entry|
+  #       Minitar.pack_file(entry, tar)
+  #     end
+  #   ensure
+  #       # Closes both tar and sgz.
+  #     tar.close
+  #   end
+  #
+  # == Copyright
+  # Copyright 2004 Mauricio Julio Fern�ndez Pradier and Austin Ziegler
+  #
+  # This program is based on and incorporates parts of RPA::Package from
+  # rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and
+  # has been adapted to be more generic by Austin.
+  #
+  # 'minitar' contains an adaptation of Ruby/ProgressBar by Satoru
+  # Takabayashi <satoru@namazu.org>, copyright � 2001 - 2004.
+  #
+  # This program is free software. It may be redistributed and/or
+  # modified under the terms of the GPL version 2 (or later) or Ruby's
+  # licence.
+module Archive::Tar::Minitar
+  VERSION = "0.5.1"
+
+    # The exception raised when a wrapped data stream class is expected to
+    # respond to #rewind or #pos but does not.
+  class NonSeekableStream < StandardError; end
+    # The exception raised when a block is required for proper operation of
+    # the method.
+  class BlockRequired < ArgumentError; end
+    # The exception raised when operations are performed on a stream that has
+    # previously been closed.
+  class ClosedStream < StandardError; end
+    # The exception raised when a filename exceeds 256 bytes in length,
+    # the maximum supported by the standard Tar format.
+  class FileNameTooLong < StandardError; end
+    # The exception raised when a data stream ends before the amount of data
+    # expected in the archive's PosixHeader.
+  class UnexpectedEOF < StandardError; end
+
+    # The class that writes a tar format archive to a data stream.
+  class Writer
+      # A stream wrapper that can only be written to. Any attempt to read
+      # from this restricted stream will result in a NameError being thrown.
+    class RestrictedStream
+      def initialize(anIO)
+        @io = anIO
+      end
+
+      def write(data)
+        @io.write(data)
+      end
+    end
+
+      # A RestrictedStream that also has a size limit.
+    class BoundedStream < Archive::Tar::Minitar::Writer::RestrictedStream
+        # The exception raised when the user attempts to write more data to
+        # a BoundedStream than has been allocated.
+      class FileOverflow < RuntimeError; end
+
+        # The maximum number of bytes that may be written to this data
+        # stream.
+      attr_reader :limit
+        # The current total number of bytes written to this data stream.
+      attr_reader :written
+
+      def initialize(io, limit)
+        @io       = io
+        @limit    = limit
+        @written  = 0
+      end
+
+      def write(data)
+        raise FileOverflow if (data.size + @written) > @limit
+        @io.write(data)
+        @written += data.size
+        data.size
+      end
+    end
+
+      # With no associated block, +Writer::open+ is a synonym for
+      # +Writer::new+. If the optional code block is given, it will be
+      # passed the new _writer_ as an argument and the Writer object will
+      # automatically be closed when the block terminates. In this instance,
+      # +Writer::open+ returns the value of the block.
+    def self.open(anIO)
+      writer = Writer.new(anIO)
+
+      return writer unless block_given?
+
+      begin
+        res = yield writer
+      ensure
+        writer.close
+      end
+
+      res
+    end
+
+      # Creates and returns a new Writer object.
+    def initialize(anIO)
+      @io     = anIO
+      @closed = false
+    end
+
+      # Adds a file to the archive as +name+. +opts+ must contain the
+      # following values:
+      #
+      # <tt>:mode</tt>::  The Unix file permissions mode value.
+      # <tt>:size</tt>::  The size, in bytes.
+      #
+      # +opts+ may contain the following values:
+      #
+      # <tt>:uid</tt>:    The Unix file owner user ID number.
+      # <tt>:gid</tt>:    The Unix file owner group ID number.
+      # <tt>:mtime</tt>:: The *integer* modification time value.
+      #
+      # It will not be possible to add more than <tt>opts[:size]</tt> bytes
+      # to the file.
+    def add_file_simple(name, opts = {}) # :yields BoundedStream:
+      raise Archive::Tar::Minitar::BlockRequired unless block_given?
+      raise Archive::Tar::ClosedStream if @closed
+
+      name, prefix = split_name(name)
+
+      header = { :name => name, :mode => opts[:mode], :mtime => opts[:mtime],
+        :size => opts[:size], :gid => opts[:gid], :uid => opts[:uid],
+        :prefix => prefix }
+      header = Archive::Tar::PosixHeader.new(header).to_s 
+      @io.write(header)
+
+      os = BoundedStream.new(@io, opts[:size])
+      yield os
+        # FIXME: what if an exception is raised in the block?
+
+      min_padding = opts[:size] - os.written
+      @io.write("\0" * min_padding)
+      remainder = (512 - (opts[:size] % 512)) % 512
+      @io.write("\0" * remainder)
+    end
+
+      # Adds a file to the archive as +name+. +opts+ must contain the
+      # following value:
+      #
+      # <tt>:mode</tt>::  The Unix file permissions mode value.
+      #
+      # +opts+ may contain the following values:
+      #
+      # <tt>:uid</tt>:    The Unix file owner user ID number.
+      # <tt>:gid</tt>:    The Unix file owner group ID number.
+      # <tt>:mtime</tt>:: The *integer* modification time value.
+      #
+      # The file's size will be determined from the amount of data written
+      # to the stream.
+      #
+      # For #add_file to be used, the Archive::Tar::Minitar::Writer must be
+      # wrapping a stream object that is seekable (e.g., it responds to
+      # #pos=). Otherwise, #add_file_simple must be used.
+      #
+      # +opts+ may be modified during the writing to the stream.
+    def add_file(name, opts = {}) # :yields RestrictedStream, +opts+:
+      raise Archive::Tar::Minitar::BlockRequired unless block_given?
+      raise Archive::Tar::Minitar::ClosedStream if @closed
+      raise Archive::Tar::Minitar::NonSeekableStream unless @io.respond_to?(:pos=)
+
+      name, prefix = split_name(name)
+      init_pos = @io.pos
+      @io.write("\0" * 512) # placeholder for the header
+
+      yield RestrictedStream.new(@io), opts
+        # FIXME: what if an exception is raised in the block?
+
+      size      = @io.pos - (init_pos + 512)
+      remainder = (512 - (size % 512)) % 512
+      @io.write("\0" * remainder)
+
+      final_pos = @io.pos
+      @io.pos   = init_pos
+
+      header = { :name => name, :mode => opts[:mode], :mtime => opts[:mtime],
+                 :size => size, :gid => opts[:gid], :uid => opts[:uid],
+                 :prefix => prefix }
+      header = Archive::Tar::PosixHeader.new(header).to_s
+      @io.write(header)
+      @io.pos = final_pos
+    end
+
+      # Creates a directory in the tar.
+    def mkdir(name, opts = {})
+      raise ClosedStream if @closed
+      name, prefix = split_name(name)
+      header = { :name => name, :mode => opts[:mode], :typeflag => "5",
+                 :size => 0, :gid => opts[:gid], :uid => opts[:uid],
+                 :mtime => opts[:mtime], :prefix => prefix }
+      header = Archive::Tar::PosixHeader.new(header).to_s
+      @io.write(header)
+      nil
+    end
+
+      # Passes the #flush method to the wrapped stream, used for buffered
+      # streams.
+    def flush
+      raise ClosedStream if @closed
+      @io.flush if @io.respond_to?(:flush)
+    end
+
+      # Closes the Writer.
+    def close
+      return if @closed
+      @io.write("\0" * 1024)
+      @closed = true
+    end
+
+    private
+    def split_name(name)
+      raise FileNameTooLong if name.size > 256
+      if name.size <= 100
+        prefix = ""
+      else
+        parts = name.split(/\//)
+        newname = parts.pop
+
+        nxt = ""
+
+        loop do
+          nxt = parts.pop
+          break if newname.size + 1 + nxt.size > 100
+          newname = "#{nxt}/#{newname}"
+        end
+
+        prefix = (parts + [nxt]).join("/")
+
+        name = newname
+
+        raise FileNameTooLong if name.size > 100 || prefix.size > 155
+      end
+      return name, prefix
+    end
+  end
+
+    # The class that reads a tar format archive from a data stream. The data
+    # stream may be sequential or random access, but certain features only work
+    # with random access data streams.
+  class Reader
+      # This marks the EntryStream closed for reading without closing the
+      # actual data stream.
+    module InvalidEntryStream
+      def read(len = nil); raise ClosedStream; end
+      def getc; raise ClosedStream;  end
+      def rewind; raise ClosedStream;  end
+    end
+      
+      # EntryStreams are pseudo-streams on top of the main data stream.
+    class EntryStream
+      Archive::Tar::PosixHeader::FIELDS.each do |field|
+        attr_reader field.intern
+      end
+
+      def initialize(header, anIO)
+        @io       = anIO
+        @name     = header.name
+        @mode     = header.mode
+        @uid      = header.uid
+        @gid      = header.gid
+        @size     = header.size
+        @mtime    = header.mtime
+        @checksum = header.checksum
+        @typeflag = header.typeflag
+        @linkname = header.linkname
+        @magic    = header.magic
+        @version  = header.version
+        @uname    = header.uname
+        @gname    = header.gname
+        @devmajor = header.devmajor
+        @devminor = header.devminor
+        @prefix   = header.prefix
+        @read     = 0
+        @orig_pos = @io.pos
+      end
+
+        # Reads +len+ bytes (or all remaining data) from the entry. Returns
+        # +nil+ if there is no more data to read.
+      def read(len = nil)
+        return nil if @read >= @size
+        len ||= @size - @read
+        max_read = [len, @size - @read].min
+        ret = @io.read(max_read)
+        @read += ret.size
+        ret
+      end
+
+        # Reads one byte from the entry. Returns +nil+ if there is no more data
+        # to read.
+      def getc
+        return nil if @read >= @size
+        ret = @io.getc
+        @read += 1 if ret
+        ret
+      end
+
+        # Returns +true+ if the entry represents a directory.
+      def directory?
+        @typeflag == "5"
+      end
+      alias_method :directory, :directory?
+
+        # Returns +true+ if the entry represents a plain file.
+      def file?
+        @typeflag == "0"
+      end
+      alias_method :file, :file?
+
+        # Returns +true+ if the current read pointer is at the end of the
+        # EntryStream data.
+      def eof?
+        @read >= @size
+      end
+
+        # Returns the current read pointer in the EntryStream.
+      def pos
+        @read
+      end
+
+        # Sets the current read pointer to the beginning of the EntryStream.
+      def rewind
+        raise NonSeekableStream unless @io.respond_to?(:pos=)
+        @io.pos = @orig_pos
+        @read = 0
+      end
+
+      def bytes_read
+        @read
+      end
+
+        # Returns the full and proper name of the entry.
+      def full_name
+        if @prefix != ""
+          File.join(@prefix, @name)
+        else
+          @name
+        end
+      end
+
+        # Closes the entry.
+      def close
+        invalidate
+      end
+
+      private
+      def invalidate
+        extend InvalidEntryStream
+      end
+    end
+
+      # With no associated block, +Reader::open+ is a synonym for
+      # +Reader::new+. If the optional code block is given, it will be passed
+      # the new _writer_ as an argument and the Reader object will
+      # automatically be closed when the block terminates. In this instance,
+      # +Reader::open+ returns the value of the block.
+    def self.open(anIO)
+      reader = Reader.new(anIO)
+
+      return reader unless block_given?
+
+      begin
+        res = yield reader
+      ensure
+        reader.close
+      end
+      
+      res
+    end
+
+      # Creates and returns a new Reader object.
+    def initialize(anIO)
+      @io     = anIO
+      @init_pos = anIO.pos
+    end
+
+      # Iterates through each entry in the data stream.
+    def each(&block)
+      each_entry(&block)
+    end
+
+      # Resets the read pointer to the beginning of data stream. Do not call
+      # this during a #each or #each_entry iteration. This only works with
+      # random access data streams that respond to #rewind and #pos.
+    def rewind
+      if @init_pos == 0
+        raise NonSeekableStream unless @io.respond_to?(:rewind)
+        @io.rewind
+      else
+        raise NonSeekableStream unless @io.respond_to?(:pos=)
+        @io.pos = @init_pos
+      end
+    end
+
+      # Iterates through each entry in the data stream.
+    def each_entry
+      loop do
+        return if @io.eof?
+
+        header = Archive::Tar::PosixHeader.new_from_stream(@io)
+        return if header.empty?
+
+        entry = EntryStream.new(header, @io)
+        size  = entry.size
+
+        yield entry
+
+        skip = (512 - (size % 512)) % 512
+
+        if @io.respond_to?(:seek)
+            # avoid reading...
+          @io.seek(size - entry.bytes_read, IO::SEEK_CUR)
+        else
+          pending = size - entry.bytes_read
+          while pending > 0
+            bread = @io.read([pending, 4096].min).size
+            raise UnexpectedEOF if @io.eof?
+            pending -= bread
+          end
+        end
+        @io.read(skip) # discard trailing zeros
+          # make sure nobody can use #read, #getc or #rewind anymore
+        entry.close
+      end
+    end
+
+    def close
+    end
+  end
+
+    # Wraps a Archive::Tar::Minitar::Reader with convenience methods and
+    # wrapped stream management; Input only works with random access data
+    # streams. See Input::new for details.
+  class Input
+    include Enumerable
+
+      # With no associated block, +Input::open+ is a synonym for
+      # +Input::new+. If the optional code block is given, it will be passed
+      # the new _writer_ as an argument and the Input object will
+      # automatically be closed when the block terminates. In this instance,
+      # +Input::open+ returns the value of the block.
+    def self.open(input)
+      stream = Input.new(input)
+      return stream unless block_given?
+
+      begin
+        res = yield stream
+      ensure
+        stream.close
+      end
+
+      res
+    end
+
+      # Creates a new Input object. If +input+ is a stream object that responds
+      # to #read), then it will simply be wrapped. Otherwise, one will be
+      # created and opened using Kernel#open. When Input#close is called, the
+      # stream object wrapped will be closed.
+    def initialize(input)
+      if input.respond_to?(:read)
+        @io = input
+      else
+        @io = open(input, "rb")
+      end
+      @tarreader = Archive::Tar::Minitar::Reader.new(@io)
+    end
+
+      # Iterates through each entry and rewinds to the beginning of the stream
+      # when finished.
+    def each(&block)
+      @tarreader.each { |entry| yield entry }
+    ensure
+      @tarreader.rewind
+    end
+
+      # Extracts the current +entry+ to +destdir+. If a block is provided, it
+      # yields an +action+ Symbol, the full name of the file being extracted
+      # (+name+), and a Hash of statistical information (+stats+).
+      #
+      # The +action+ will be one of:
+      # <tt>:dir</tt>::           The +entry+ is a directory.
+      # <tt>:file_start</tt>::    The +entry+ is a file; the extract of the
+      #                           file is just beginning.
+      # <tt>:file_progress</tt>:: Yielded every 4096 bytes during the extract
+      #                           of the +entry+.
+      # <tt>:file_done</tt>::     Yielded when the +entry+ is completed.
+      #
+      # The +stats+ hash contains the following keys:
+      # <tt>:current</tt>:: The current total number of bytes read in the
+      #                     +entry+.
+      # <tt>:currinc</tt>:: The current number of bytes read in this read
+      #                     cycle.
+      # <tt>:entry</tt>::   The entry being extracted; this is a
+      #                     Reader::EntryStream, with all methods thereof.
+    def extract_entry(destdir, entry) # :yields action, name, stats:
+      stats = {
+        :current  => 0,
+        :currinc  => 0,
+        :entry    => entry
+      }
+
+      if entry.directory?
+        dest = File.join(destdir, entry.full_name)
+
+        yield :dir, entry.full_name, stats if block_given?
+
+        if Archive::Tar::Minitar.dir?(dest)
+          begin
+            FileUtils.chmod(entry.mode, dest)
+          rescue Exception
+            nil
+          end
+        else
+          FileUtils.mkdir_p(dest, :mode => entry.mode)
+          FileUtils.chmod(entry.mode, dest)
+        end
+
+        fsync_dir(dest)
+        fsync_dir(File.join(dest, ".."))
+        return
+      else # it's a file
+        destdir = File.join(destdir, File.dirname(entry.full_name))
+        FileUtils.mkdir_p(destdir, :mode => 0755)
+
+        destfile = File.join(destdir, File.basename(entry.full_name))
+        FileUtils.chmod(0600, destfile) rescue nil  # Errno::ENOENT
+
+        yield :file_start, entry.full_name, stats if block_given?
+
+        File.open(destfile, "wb", entry.mode) do |os|
+          loop do
+            data = entry.read(4096)
+            break unless data
+
+            stats[:currinc] = os.write(data)
+            stats[:current] += stats[:currinc]
+
+            yield :file_progress, entry.full_name, stats if block_given?
+          end
+          os.fsync
+        end
+
+        FileUtils.chmod(entry.mode, destfile)
+        fsync_dir(File.dirname(destfile))
+        fsync_dir(File.join(File.dirname(destfile), ".."))
+
+        yield :file_done, entry.full_name, stats if block_given?
+      end
+    end
+
+      # Returns the Reader object for direct access.
+    def tar
+      @tarreader
+    end
+
+      # Closes the Reader object and the wrapped data stream.
+    def close
+      @io.close
+      @tarreader.close
+    end
+
+  private
+    def fsync_dir(dirname)
+        # make sure this hits the disc
+      dir = open(dirname, 'rb')
+      dir.fsync
+    rescue # ignore IOError if it's an unpatched (old) Ruby
+      nil
+    ensure
+      dir.close if dir rescue nil
+    end
+  end
+
+    # Wraps a Archive::Tar::Minitar::Writer with convenience methods and
+    # wrapped stream management; Output only works with random access data
+    # streams. See Output::new for details.
+  class Output
+      # With no associated block, +Output::open+ is a synonym for
+      # +Output::new+. If the optional code block is given, it will be passed
+      # the new _writer_ as an argument and the Output object will
+      # automatically be closed when the block terminates. In this instance,
+      # +Output::open+ returns the value of the block.
+    def self.open(output)
+      stream = Output.new(output)
+      return stream unless block_given?
+
+      begin
+        res = yield stream
+      ensure
+        stream.close
+      end
+
+      res
+    end
+
+      # Creates a new Output object. If +output+ is a stream object that
+      # responds to #read), then it will simply be wrapped. Otherwise, one will
+      # be created and opened using Kernel#open. When Output#close is called,
+      # the stream object wrapped will be closed.
+    def initialize(output)
+      if output.respond_to?(:write)
+        @io = output
+      else
+        @io = ::File.open(output, "wb")
+      end
+      @tarwriter = Archive::Tar::Minitar::Writer.new(@io)
+    end
+
+      # Returns the Writer object for direct access.
+    def tar
+      @tarwriter
+    end
+
+      # Closes the Writer object and the wrapped data stream.
+    def close
+      @tarwriter.close
+      @io.close
+    end
+  end
+
+  class << self
+      # Tests if +path+ refers to a directory. Fixes an apparently
+      # corrupted <tt>stat()</tt> call on Windows.
+    def dir?(path)
+      File.directory?((path[-1] == ?/) ? path : "#{path}/")
+    end
+
+      # A convenience method for wrapping Archive::Tar::Minitar::Input.open
+      # (mode +r+) and Archive::Tar::Minitar::Output.open (mode +w+). No other
+      # modes are currently supported.
+    def open(dest, mode = "r", &block)
+      case mode
+      when "r"
+        Input.open(dest, &block)
+      when "w"
+        Output.open(dest, &block)
+      else
+        raise "Unknown open mode for Archive::Tar::Minitar.open."
+      end
+    end
+
+      # A convenience method to packs the file provided. +entry+ may either be
+      # a filename (in which case various values for the file (see below) will
+      # be obtained from <tt>File#stat(entry)</tt> or a Hash with the fields:
+      #
+      # <tt>:name</tt>::  The filename to be packed into the tarchive.
+      #                   *REQUIRED*.
+      # <tt>:mode</tt>::  The mode to be applied.
+      # <tt>:uid</tt>::   The user owner of the file. (Ignored on Windows.)
+      # <tt>:gid</tt>::   The group owner of the file. (Ignored on Windows.)
+      # <tt>:mtime</tt>:: The modification Time of the file.
+      #
+      # During packing, if a block is provided, #pack_file yields an +action+
+      # Symol, the full name of the file being packed, and a Hash of
+      # statistical information, just as with
+      # Archive::Tar::Minitar::Input#extract_entry.
+      #
+      # The +action+ will be one of:
+      # <tt>:dir</tt>::           The +entry+ is a directory.
+      # <tt>:file_start</tt>::    The +entry+ is a file; the extract of the
+      #                           file is just beginning.
+      # <tt>:file_progress</tt>:: Yielded every 4096 bytes during the extract
+      #                           of the +entry+.
+      # <tt>:file_done</tt>::     Yielded when the +entry+ is completed.
+      #
+      # The +stats+ hash contains the following keys:
+      # <tt>:current</tt>:: The current total number of bytes read in the
+      #                     +entry+.
+      # <tt>:currinc</tt>:: The current number of bytes read in this read
+      #                     cycle.
+      # <tt>:name</tt>::    The filename to be packed into the tarchive.
+      #                     *REQUIRED*.
+      # <tt>:mode</tt>::    The mode to be applied.
+      # <tt>:uid</tt>::     The user owner of the file. (+nil+ on Windows.)
+      # <tt>:gid</tt>::     The group owner of the file. (+nil+ on Windows.)
+      # <tt>:mtime</tt>::   The modification Time of the file.
+    def pack_file(entry, outputter) #:yields action, name, stats:
+      outputter = outputter.tar if outputter.kind_of?(Archive::Tar::Minitar::Output)
+
+      stats = {}
+
+      if entry.kind_of?(Hash)
+        name = entry[:name]
+
+        entry.each { |kk, vv| stats[kk] = vv unless vv.nil? }
+      else
+        name = entry
+      end
+      
+      name = name.sub(%r{\./}, '')
+      stat = File.stat(name)
+      stats[:mode]   ||= stat.mode
+      stats[:mtime]  ||= stat.mtime
+      stats[:size]   = stat.size
+
+      if RUBY_PLATFORM =~ /win32/
+        stats[:uid]  = nil
+        stats[:gid]  = nil
+      else
+        stats[:uid]  ||= stat.uid
+        stats[:gid]  ||= stat.gid
+      end
+
+      case
+      when File.file?(name)
+        outputter.add_file_simple(name, stats) do |os|
+          stats[:current] = 0
+          yield :file_start, name, stats if block_given?
+          File.open(name, "rb") do |ff|
+            until ff.eof?
+              stats[:currinc] = os.write(ff.read(4096))
+              stats[:current] += stats[:currinc]
+              yield :file_progress, name, stats if block_given?
+            end
+          end
+          yield :file_done, name, stats if block_given?
+        end
+      when dir?(name)
+        yield :dir, name, stats if block_given?
+        outputter.mkdir(name, stats)
+      else
+        raise "Don't yet know how to pack this type of file."
+      end
+    end
+
+      # A convenience method to pack files specified by +src+ into +dest+. If
+      # +src+ is an Array, then each file detailed therein will be packed into
+      # the resulting Archive::Tar::Minitar::Output stream; if +recurse_dirs+
+      # is true, then directories will be recursed.
+      #
+      # If +src+ is an Array, it will be treated as the argument to Find.find;
+      # all files matching will be packed.
+    def pack(src, dest, recurse_dirs = true, &block)
+      Output.open(dest) do |outp|
+        if src.kind_of?(Array)
+          src.each do |entry|
+            pack_file(entry, outp, &block)
+            if dir?(entry) and recurse_dirs
+              Dir["#{entry}/**/**"].each do |ee|
+                pack_file(ee, outp, &block)
+              end
+            end
+          end
+        else
+          Find.find(src) do |entry|
+            pack_file(entry, outp, &block)
+          end
+        end
+      end
+    end
+
+      # A convenience method to unpack files from +src+ into the directory
+      # specified by +dest+. Only those files named explicitly in +files+
+      # will be extracted.
+    def unpack(src, dest, files = [], &block)
+      Input.open(src) do |inp|
+        if File.exist?(dest) and (not dir?(dest))
+          raise "Can't unpack to a non-directory."
+        elsif not File.exist?(dest)
+          FileUtils.mkdir_p(dest)
+        end
+
+        inp.each do |entry|
+          if files.empty? or files.include?(entry.full_name)
+            inp.extract_entry(dest, entry, &block)
+          end
+        end
+      end
+    end
+  end
+end